2 Firewall-1 Network Object Configuration

Begin by configuring the Firewall-1 Policy. Open the Policy Editor on the Firewall-1 Management server and create a new “Workstation” Network Object representing FreeBSD GW.

General Tab:
		Set name and IP address

VPN Tab:
		Encryption Schemes Defined:             IKE               ---> Edit

IKE Properties:
		Key Negotiation Encryption Methods:     3DES

Authentication Method:
		Pre-Shared Secret ---> Edit

Select the Firewall Object and set a pre-shared secret. (Do not use our example.)

Support Aggressive Mode:                 Checked
Supports Subnets:                      Checked

After setting the pre-shared secret in the Firewall-1 Network Object definition, place this secret in the /usr/local/etc/racoon/psk.txt file on FreeBSD GW. The format for psk.txt is:

208.229.100.6          rUac0wtoo?