snap-core-0.9.3.1: Snap: A Haskell Web Framework (core interfaces and types)

Safe Haskell | None

Snap.Core

Contents

- The Snap Monad
  - Functions for control flow and early termination
    - Escaping HTTP
  - Routing
  - Access to state
  - Logging
  - Grabbing/transforming request bodies
- HTTP Datatypes and Functions
  - Headers
  - Requests
  - Responses
    - Response I/O
  - Timeouts
- Iteratee
- HTTP utilities

Description

This module contains the core type definitions, class instances, and functions for HTTP as well as the `Snap` monad, which is used for web handlers.

Synopsis

- data Snap a
- runSnap :: Snap a -> (ByteString -> IO ()) -> ((Int -> Int) -> IO ()) -> Request -> Iteratee ByteString IO (Request, Response)
- class (Monad m, MonadIO m, MonadCatchIO m, MonadPlus m, Functor m, Applicative m, Alternative m) => MonadSnap m where
  - liftSnap :: Snap a -> m a
- data NoHandlerException = NoHandlerException String
- bracketSnap :: IO a -> (a -> IO b) -> (a -> Snap c) -> Snap c
- finishWith :: MonadSnap m => Response -> m a
- catchFinishWith :: Snap a -> Snap (Either Response a)
- pass :: MonadSnap m => m a
- terminateConnection :: (Exception e, MonadCatchIO m) => e -> m a
- type EscapeHttpHandler = ((Int -> Int) -> IO ()) -> Iteratee ByteString IO () -> Iteratee ByteString IO ()
- escapeHttp :: MonadCatchIO m => EscapeHttpHandler -> m ()
- method :: MonadSnap m => Method -> m a -> m a
- methods :: MonadSnap m => [Method] -> m a -> m a
- path :: MonadSnap m => ByteString -> m a -> m a
- pathArg :: (Readable a, MonadSnap m) => (a -> m b) -> m b
- dir :: MonadSnap m => ByteString -> m a -> m a
- ifTop :: MonadSnap m => m a -> m a
- route :: MonadSnap m => [(ByteString, m a)] -> m a
- routeLocal :: MonadSnap m => [(ByteString, m a)] -> m a
- getRequest :: MonadSnap m => m Request
- getsRequest :: MonadSnap m => (Request -> a) -> m a
- getResponse :: MonadSnap m => m Response
- getsResponse :: MonadSnap m => (Response -> a) -> m a
- putRequest :: MonadSnap m => Request -> m ()
- putResponse :: MonadSnap m => Response -> m ()
- modifyRequest :: MonadSnap m => (Request -> Request) -> m ()
- modifyResponse :: MonadSnap m => (Response -> Response) -> m ()
- localRequest :: MonadSnap m => (Request -> Request) -> m a -> m a
- withRequest :: MonadSnap m => (Request -> m a) -> m a
- withResponse :: MonadSnap m => (Response -> m a) -> m a
- logError :: MonadSnap m => ByteString -> m ()
- runRequestBody :: MonadSnap m => Iteratee ByteString IO a -> m a
- getRequestBody :: MonadSnap m => m ByteString
- readRequestBody :: MonadSnap m => Int64 -> m ByteString
- transformRequestBody :: (forall a. Enumerator Builder IO a) -> Snap ()
- data Request
- data Response
- data Headers
- class HasHeaders a where
  - updateHeaders :: (Headers -> Headers) -> a -> a
  - headers :: a -> Headers
- type Params = Map ByteString [ByteString]
- data Method
  - = GET
  - | HEAD
  - | POST
  - | PUT
  - | DELETE
  - | TRACE
  - | OPTIONS
  - | CONNECT
  - | PATCH
  - | Method ByteString
- data Cookie = Cookie {
  - cookieName :: !ByteString
  - cookieValue :: !ByteString
  - cookieExpires :: !(Maybe UTCTime)
  - cookieDomain :: !(Maybe ByteString)
  - cookiePath :: !(Maybe ByteString)
  - cookieSecure :: !Bool
  - cookieHttpOnly :: !Bool
  }
- type HttpVersion = (Int, Int)
- addHeader :: HasHeaders a => CI ByteString -> ByteString -> a -> a
- setHeader :: HasHeaders a => CI ByteString -> ByteString -> a -> a
- getHeader :: HasHeaders a => CI ByteString -> a -> Maybe ByteString
- getHeaders :: HasHeaders a => CI ByteString -> a -> Maybe [ByteString]
- listHeaders :: HasHeaders a => a -> [(CI ByteString, ByteString)]
- deleteHeader :: HasHeaders a => CI ByteString -> a -> a
- ipHeaderFilter :: MonadSnap m => m ()
- ipHeaderFilter' :: MonadSnap m => CI ByteString -> m ()
- rqServerName :: Request -> ByteString
- rqServerPort :: Request -> Int
- rqRemoteAddr :: Request -> ByteString
- rqRemotePort :: Request -> Int
- rqLocalAddr :: Request -> ByteString
- rqLocalHostname :: Request -> ByteString
- rqIsSecure :: Request -> Bool
- rqContentLength :: Request -> Maybe Int
- rqMethod :: Request -> Method
- rqVersion :: Request -> HttpVersion
- rqCookies :: Request -> [Cookie]
- rqPathInfo :: Request -> ByteString
- rqContextPath :: Request -> ByteString
- rqURI :: Request -> ByteString
- rqQueryString :: Request -> ByteString
- rqParams :: Request -> Params
- rqQueryParams :: Request -> Params
- rqPostParams :: Request -> Params
- rqParam :: ByteString -> Request -> Maybe [ByteString]
- rqPostParam :: ByteString -> Request -> Maybe [ByteString]
- rqQueryParam :: ByteString -> Request -> Maybe [ByteString]
- getParam :: MonadSnap m => ByteString -> m (Maybe ByteString)
- getPostParam :: MonadSnap m => ByteString -> m (Maybe ByteString)
- getQueryParam :: MonadSnap m => ByteString -> m (Maybe ByteString)
- getParams :: MonadSnap m => m Params
- getPostParams :: MonadSnap m => m Params
- getQueryParams :: MonadSnap m => m Params
- rqModifyParams :: (Params -> Params) -> Request -> Request
- rqSetParam :: ByteString -> [ByteString] -> Request -> Request
- emptyResponse :: Response
- setResponseCode :: Int -> Response -> Response
- setResponseStatus :: Int -> ByteString -> Response -> Response
- rspStatus :: Response -> Int
- rspStatusReason :: Response -> ByteString
- setContentType :: ByteString -> Response -> Response
- addResponseCookie :: Cookie -> Response -> Response
- getResponseCookie :: ByteString -> Response -> Maybe Cookie
- getResponseCookies :: Response -> [Cookie]
- deleteResponseCookie :: ByteString -> Response -> Response
- modifyResponseCookie :: ByteString -> (Cookie -> Cookie) -> Response -> Response
- expireCookie :: MonadSnap m => ByteString -> Maybe ByteString -> m ()
- getCookie :: MonadSnap m => ByteString -> m (Maybe Cookie)
- readCookie :: (MonadSnap m, Readable a) => ByteString -> m a
- setContentLength :: Int64 -> Response -> Response
- clearContentLength :: Response -> Response
- redirect :: MonadSnap m => ByteString -> m a
- redirect' :: MonadSnap m => ByteString -> Int -> m a
- setBufferingMode :: Bool -> Response -> Response
- getBufferingMode :: Response -> Bool
- setResponseBody :: (forall a. Enumerator Builder IO a) -> Response -> Response
- modifyResponseBody :: (forall a. Enumerator Builder IO a -> Enumerator Builder IO a) -> Response -> Response
- addToOutput :: MonadSnap m => (forall a. Enumerator Builder IO a) -> m ()
- writeBuilder :: MonadSnap m => Builder -> m ()
- writeBS :: MonadSnap m => ByteString -> m ()
- writeLazyText :: MonadSnap m => Text -> m ()
- writeText :: MonadSnap m => Text -> m ()
- writeLBS :: MonadSnap m => ByteString -> m ()
- sendFile :: MonadSnap m => FilePath -> m ()
- sendFilePartial :: MonadSnap m => FilePath -> (Int64, Int64) -> m ()
- setTimeout :: MonadSnap m => Int -> m ()
- extendTimeout :: MonadSnap m => Int -> m ()
- modifyTimeout :: MonadSnap m => (Int -> Int) -> m ()
- getTimeoutAction :: MonadSnap m => m (Int -> IO ())
- getTimeoutModifier :: MonadSnap m => m ((Int -> Int) -> IO ())
- type Enumerator a m b = Step a m b -> Iteratee a m b
- newtype SomeEnumerator = SomeEnumerator (forall a. Enumerator ByteString IO a)
- formatHttpTime :: CTime -> IO ByteString
- parseHttpTime :: ByteString -> IO CTime
- parseUrlEncoded :: ByteString -> Map ByteString [ByteString]
- buildUrlEncoded :: Map ByteString [ByteString] -> Builder
- printUrlEncoded :: Map ByteString [ByteString] -> ByteString
- urlEncode :: ByteString -> ByteString
- urlEncodeBuilder :: ByteString -> Builder
- urlDecode :: ByteString -> Maybe ByteString

# The Snap Monad

data Snap a

Instances

Monad Snap |
Functor Snap |
Typeable1 Snap |
MonadPlus Snap |
Applicative Snap |
MonadCatchIO Snap |
Alternative Snap |
MonadIO Snap |
MonadSnap Snap |
MonadError String Snap |

runSnap :: Snap a -> (ByteString -> IO ()) -> ((Int -> Int) -> IO ()) -> Request -> Iteratee ByteString IO (Request, Response)

Runs a `Snap` monad action in the 'Iteratee IO' monad.

class (Monad m, MonadIO m, MonadCatchIO m, MonadPlus m, Functor m, Applicative m, Alternative m) => MonadSnap m where

`Snap` is the `Monad` that user web handlers run in. `Snap` gives you:

1. stateful access to fetch or modify an HTTP `Request`
2. stateful access to fetch or modify an HTTP `Response`
3. failure / `Alternative` / `MonadPlus` semantics: a `Snap` handler can choose not to handle a given request, using `empty` or its synonym `pass`, and you can try alternative handlers with the `<|>` operator:

     a :: Snap String
     a = pass

     b :: Snap String
     b = return "foo"

     c :: Snap String
     c = a <|> b             -- try running a, if it fails then try b

1. convenience functions (`writeBS`, `writeLBS`, `writeText`, `writeLazyText`, `addToOutput`) for queueing output to be written to the `Response`:

     a :: (forall a . Enumerator a) -> Snap ()
     a someEnumerator = do
         writeBS "I'm a strict bytestring"
         writeLBS "I'm a lazy bytestring"
         writeText "I'm strict text"
         addToOutput someEnumerator

1. early termination: if you call `finishWith`:

     a :: Snap ()
     a = do
       modifyResponse $ setResponseStatus 500 "Internal Server Error"
       writeBS "500 error"
       r <- getResponse
       finishWith r

then any subsequent processing will be skipped and supplied `Response` value will be returned from `runSnap` as-is.

1. access to the `IO` monad through a `MonadIO` instance:

     a :: Snap ()
     a = liftIO fireTheMissiles

1. the ability to set or extend a timeout which will kill the handler thread after `N` seconds of inactivity (the default is 20 seconds):

     a :: Snap ()
     a = setTimeout 30

1. throw and catch exceptions using a `MonadCatchIO` instance:

     foo :: Snap ()
     foo = bar `catch` \(e::SomeException) -> baz
       where
         bar = throw FooException

1. log a message to the error log:

     foo :: Snap ()
     foo = logError "grumble."

You may notice that most of the type signatures in this module contain a `(MonadSnap m) => ...` typeclass constraint. `MonadSnap` is a typeclass which, in essence, says "you can get back to the `Snap` monad from here". Using `MonadSnap` you can extend the `Snap` monad with additional functionality and still have access to most of the `Snap` functions without writing `lift` everywhere. Instances are already provided for most of the common monad transformers (`ReaderT`, `WriterT`, `StateT`, etc.).

`MonadSnap` is a type class, analogous to `MonadIO` for `IO`, that makes it easy to wrap `Snap` inside monad transformers.

Methods

liftSnap :: Snap a -> m a

Instances

MonadSnap Snap |
MonadSnap m => MonadSnap (ListT m) |
MonadSnap m => MonadSnap (ContT c m) |
(MonadSnap m, Error e) => MonadSnap (ErrorT e m) |
MonadSnap m => MonadSnap (ReaderT r m) |
MonadSnap m => MonadSnap (StateT s m) |
MonadSnap m => MonadSnap (StateT s m) |
(MonadSnap m, Monoid w) => MonadSnap (WriterT w m) |
(MonadSnap m, Monoid w) => MonadSnap (WriterT w m) |
(MonadSnap m, Monoid w) => MonadSnap (RWST r w s m) |
(MonadSnap m, Monoid w) => MonadSnap (RWST r w s m) |

data NoHandlerException

This exception is thrown if the handler you supply to `runSnap` fails.

Constructors

NoHandlerException String |

Instances

Eq NoHandlerException |
Show NoHandlerException |
Typeable NoHandlerException |
Exception NoHandlerException |

## Functions for control flow and early termination

bracketSnap :: IO a -> (a -> IO b) -> (a -> Snap c) -> Snap c

This function brackets a Snap action in resource acquisition and release. This is provided because MonadCatchIO's `bracket` function doesn't work properly in the case of a short-circuit return from the action being bracketed.

In order to prevent confusion regarding the effects of the aquisition and release actions on the Snap state, this function doesn't accept Snap actions for the acquire or release actions.

This function will run the release action in all cases where the acquire action succeeded. This includes the following behaviors from the bracketed Snap action.

1. Normal completion
2. Short-circuit completion, either from calling `fail` or `finishWith`
3. An exception being thrown.

finishWith :: MonadSnap m => Response -> m a

Short-circuits a `Snap` monad action early, storing the given `Response` value in its state.

catchFinishWith :: Snap a -> Snap (Either Response a)

Capture the flow of control in case a handler calls `finishWith`.

WARNING: in the event of a call to `transformRequestBody` it is possible to violate HTTP protocol safety when using this function. If you call `catchFinishWith` it is suggested that you do not modify the body of the `Response` which was passed to the `finishWith` call.

pass :: MonadSnap m => m a

Fails out of a `Snap` monad action. This is used to indicate that you choose not to handle the given request within the given handler.

terminateConnection :: (Exception e, MonadCatchIO m) => e -> m a

Terminate the HTTP session with the given exception.

### Escaping HTTP

type EscapeHttpHandler

Arguments

= ((Int -> Int) -> IO ()) | timeout modifier
-> Iteratee ByteString IO () | socket write end
-> Iteratee ByteString IO () |

escapeHttp :: MonadCatchIO m => EscapeHttpHandler -> m ()

Terminate the HTTP session and hand control to some external handler, escaping all further HTTP traffic.

The external handler takes two arguments: a function to modify the thread's timeout, and a write end to the socket.

## Routing

method :: MonadSnap m => Method -> m a -> m a

Runs a `Snap` monad action only if the request's HTTP method matches the given method.

methods :: MonadSnap m => [Method] -> m a -> m a

Runs a `Snap` monad action only if the request's HTTP method matches one of the given methods.

path

Arguments

:: MonadSnap m |
=> ByteString | path to match against
-> m a | handler to run
-> m a |

Runs a `Snap` monad action only for requests where `rqPathInfo` is exactly equal to the given string. If the path matches, locally sets `rqContextPath` to the old value of `rqPathInfo`, sets `rqPathInfo`="", and runs the given handler.

pathArg :: (Readable a, MonadSnap m) => (a -> m b) -> m b

Runs a `Snap` monad action only when the first path component is successfully parsed as the argument to the supplied handler function.

dir

Arguments

:: MonadSnap m |
=> ByteString | path component to match
-> m a | handler to run
-> m a |

Runs a `Snap` monad action only when the `rqPathInfo` of the request starts with the given path. For example,

     dir "foo" handler

Will fail if `rqPathInfo` is not "`/foo`" or "`/foo/...`", and will add `"foo/"` to the handler's local `rqContextPath`.

ifTop :: MonadSnap m => m a -> m a

Runs a `Snap` monad action only when `rqPathInfo` is empty.

route :: MonadSnap m => [(ByteString, m a)] -> m a

A web handler which, given a mapping from URL entry points to web handlers, efficiently routes requests to the correct handler.

The URL entry points are given as relative paths, for example:

     route [ ("foo/bar/quux", fooBarQuux) ]

If the URI of the incoming request is

     /foo/bar/quux

or

     /foo/bar/quux/...anything...

then the request will be routed to "`fooBarQuux`", with `rqContextPath` set to "`/foo/bar/quux/`" and `rqPathInfo` set to "`...anything...`".

A path component within an URL entry point beginning with a colon ("`:`") is treated as a variable capture; the corresponding path component within the request URI will be entered into the `rqParams` parameters mapping with the given name. For instance, if the routes were:

     route [ ("foo/:bar/baz", fooBazHandler) ]

Then a request for "`/foo/saskatchewan/baz`" would be routed to `fooBazHandler` with a mapping for:

     "bar" => "saskatchewan"

in its parameters table.

Longer paths are matched first, and specific routes are matched before captures. That is, if given routes:

     [ ("a", h1), ("a/b", h2), ("a/:x", h3) ]

a request for "`/a/b`" will go to `h2`, "`/a/s`" for any s will go to `h3`, and "`/a`" will go to `h1`.

The following example matches "`/article`" to an article index, "`/login`" to a login, and "`/article/...`" to an article renderer.

     route [ ("article",     renderIndex)
           , ("article/:id", renderArticle)
           , ("login",       method POST doLogin) ]

URL decoding

A short note about URL decoding: path matching and variable capture are done on decoded URLs, but the contents of `rqContextPath` and `rqPathInfo` will contain the original encoded URL, i.e. what the user entered. For example, in the following scenario:

     route [ ("a b c d/", foo ) ]

A request for "`/a+b+c+d`" will be sent to `foo` with `rqContextPath` set to "a+b+c+d".

This behaviour changed as of Snap 0.6.1; previous versions had unspecified (and buggy!) semantics here.

routeLocal :: MonadSnap m => [(ByteString, m a)] -> m a

The `routeLocal` function is the same as `route'`, except it doesn't change the request's context path. This is useful if you want to route to a particular handler but you want that handler to receive the `rqPathInfo` as it is.

## Access to state

getRequest :: MonadSnap m => m Request

Grabs the `Request` object out of the `Snap` monad.

getsRequest :: MonadSnap m => (Request -> a) -> m a

Grabs something out of the `Request` object, using the given projection function. See `gets`.

getResponse :: MonadSnap m => m Response

Grabs the `Response` object out of the `Snap` monad.

getsResponse :: MonadSnap m => (Response -> a) -> m a

Grabs something out of the `Response` object, using the given projection function. See `gets`.

putRequest :: MonadSnap m => Request -> m ()

Puts a new `Request` object into the `Snap` monad.

putResponse :: MonadSnap m => Response -> m ()

Puts a new `Response` object into the `Snap` monad.

modifyRequest :: MonadSnap m => (Request -> Request) -> m ()

Modifies the `Request` object stored in a `Snap` monad.

modifyResponse :: MonadSnap m => (Response -> Response) -> m ()

Modifes the `Response` object stored in a `Snap` monad.

localRequest :: MonadSnap m => (Request -> Request) -> m a -> m a

Runs a `Snap` action with a locally-modified `Request` state object. The `Request` object in the Snap monad state after the call to localRequest will be unchanged.

withRequest :: MonadSnap m => (Request -> m a) -> m a

Fetches the `Request` from state and hands it to the given action.

withResponse :: MonadSnap m => (Response -> m a) -> m a

Fetches the `Response` from state and hands it to the given action.

## Logging

logError :: MonadSnap m => ByteString -> m ()

Log an error message in the `Snap` monad

## Grabbing/transforming request bodies

runRequestBody :: MonadSnap m => Iteratee ByteString IO a -> m a

Sends the request body through an iteratee (data consumer) and returns the result.

If the iteratee you pass in here throws an exception, Snap will attempt to clear the rest of the unread request body before rethrowing the exception. If your iteratee used `terminateConnection`, however, Snap will give up and immediately close the socket.

getRequestBody :: MonadSnap m => m ByteString

Deprecated: As of 0.6, please use `readRequestBody` instead

Returns the request body as a lazy bytestring.

This function is deprecated as of 0.6; it places no limits on the size of the request being read, and as such, if used, can result in a denial-of-service attack on your server. Please use `readRequestBody` instead.

readRequestBody

Arguments

:: MonadSnap m |
=> Int64 | size of the largest request body we're willing to accept. If a request body longer than this is received, a `TooManyBytesReadException` is thrown. See `takeNoMoreThan`.
-> m ByteString |

Returns the request body as a lazy bytestring. New in 0.6.

transformRequestBody

Arguments

:: (forall a. Enumerator Builder IO a) | the output `Iteratee` is passed to this `Enumerator`, and then the resulting `Iteratee` is fed the request body stream. Your `Enumerator` is responsible for transforming the input.
-> Snap () |

Normally Snap is careful to ensure that the request body is fully consumed after your web handler runs, but before the `Response` enumerator is streamed out the socket. If you want to transform the request body into some output in O(1) space, you should use this function.

Note that upon calling this function, response processing finishes early as if you called `finishWith`. Make sure you set any content types, headers, cookies, etc. before you call this function.

# HTTP Datatypes and Functions

HTTP-related datatypes: `Request`, `Response`, `Cookie`, etc.

data Request

Contains all of the information about an incoming HTTP request.

Instances

Show Request |
HasHeaders Request |
Monad m => MonadState Request (RequestBuilder m) |

data Response

Represents an HTTP response.

Instances

Show Response |
HasHeaders Response |

data Headers

Instances

Show Headers |
HasHeaders Headers |

class HasHeaders a where

A typeclass for datatypes which contain HTTP headers.

Methods

updateHeaders :: (Headers -> Headers) -> a -> a

Modify the datatype's headers.

headers :: a -> Headers

Retrieve the headers from a datatype that has headers.

Instances

HasHeaders Headers |
HasHeaders Response |
HasHeaders Request |

type Params = Map ByteString [ByteString]

A type alias for the HTTP parameters mapping. Each parameter key maps to a list of ByteString values; if a parameter is specified multiple times (e.g.: "`GET /foo?param=bar1&param=bar2`"), looking up "`param`" in the mapping will give you `["bar1", "bar2"]`.

data Method

Enumerates the HTTP method values (see http://tools.ietf.org/html/rfc2068.html#section-5.1.1).

Constructors

GET |
HEAD |
POST |
PUT |
DELETE |
TRACE |
OPTIONS |
CONNECT |
PATCH |
Method ByteString |

Instances

Eq Method |
Ord Method |
Read Method |
Show Method |

data Cookie

A datatype representing an HTTP cookie.

Constructors

Cookie |
Fields cookieName :: !ByteString The name of the cookie. cookieValue :: !ByteString The cookie's string value. cookieExpires :: !(Maybe UTCTime) The cookie's expiration value, if it has one. cookieDomain :: !(Maybe ByteString) The cookie's "domain" value, if it has one. cookiePath :: !(Maybe ByteString) The cookie path. cookieSecure :: !Bool Tag as secure cookie? cookieHttpOnly :: !Bool HttpOnly?

Instances

Eq Cookie |
Show Cookie |

type HttpVersion = (Int, Int)

## Headers

addHeader :: HasHeaders a => CI ByteString -> ByteString -> a -> a

Adds a header key-value-pair to the `HasHeaders` datatype. If a header with the same name already exists, the new value is appended to the headers list.

setHeader :: HasHeaders a => CI ByteString -> ByteString -> a -> a

Sets a header key-value-pair in a `HasHeaders` datatype. If a header with the same name already exists, it is overwritten with the new value.

getHeader :: HasHeaders a => CI ByteString -> a -> Maybe ByteString

Gets a header value out of a `HasHeaders` datatype. If many headers came in with the same name, they will be catenated together.

getHeaders :: HasHeaders a => CI ByteString -> a -> Maybe [ByteString]

Gets all of the values for a given header.

listHeaders :: HasHeaders a => a -> [(CI ByteString, ByteString)]

Lists all the headers out of a `HasHeaders` datatype. If many headers came in with the same name, they will be catenated together.

deleteHeader :: HasHeaders a => CI ByteString -> a -> a

Clears a header value from a `HasHeaders` datatype.

ipHeaderFilter :: MonadSnap m => m ()

Modifies the `Request` in the state to set the `rqRemoteAddr` field to the value in the X-Forwarded-For header. If the header is not present, this action has no effect.

This action should be used only when working behind a reverse http proxy that sets the X-Forwarded-For header. This is the only way to ensure the value in the X-Forwarded-For header can be trusted.

This is provided as a filter so actions that require the remote address can get it in a uniform manner. It has specifically limited functionality to ensure that its transformation can be trusted, when used correctly.

ipHeaderFilter' :: MonadSnap m => CI ByteString -> m ()

Modifies the `Request` in the state to set the `rqRemoteAddr` field to the value from the header specified. If the header specified is not present, this action has no effect.

This action should be used only when working behind a reverse http proxy that sets the header being looked at. This is the only way to ensure the value in the header can be trusted.

This is provided as a filter so actions that require the remote address can get it in a uniform manner. It has specifically limited functionality to ensure that its transformation can be trusted, when used correctly.

## Requests

rqServerName :: Request -> ByteString

The server name of the request, as it came in from the request's `Host:` header.

rqServerPort :: Request -> Int

Returns the port number the HTTP server is listening on.

rqRemoteAddr :: Request -> ByteString

The remote IP address.

rqRemotePort :: Request -> Int

The remote TCP port number.

rqLocalAddr :: Request -> ByteString

The local IP address for this request.

rqLocalHostname :: Request -> ByteString

Returns the HTTP server's idea of its local hostname.

rqIsSecure :: Request -> Bool

Returns `True` if this is an `HTTPS` session.

rqContentLength :: Request -> Maybe Int

Returns the `Content-Length` of the HTTP request body.

rqMethod :: Request -> Method

Returns the HTTP request method.

rqVersion :: Request -> HttpVersion

Returns the HTTP version used by the client.

rqCookies :: Request -> [Cookie]

Returns a list of the cookies that came in from the HTTP request headers.

rqPathInfo :: Request -> ByteString

Handlers can be hung on a `URI` "entry point"; this is called the "context path". If a handler is hung on the context path `"/foo/"`, and you request `"/foo/bar"`, the value of `rqPathInfo` will be `"bar"`.

The following identity holds:

     rqURI r == S.concat [ rqContextPath r
                         , rqPathInfo r
                         , let q = rqQueryString r
                           in if S.null q
                                then ""
                                else S.append "?" q
                         ]

rqContextPath :: Request -> ByteString

The "context path" of the request; catenating `rqContextPath`, and `rqPathInfo` should get you back to the original `rqURI` (ignoring query strings). The `rqContextPath` always begins and ends with a slash (`"/"`) character, and represents the path (relative to your component/snaplet) you took to get to your handler.

rqURI :: Request -> ByteString

Returns the `URI` requested by the client.

rqQueryString :: Request -> ByteString

Returns the HTTP query string for this `Request`.

rqParams :: Request -> Params

Returns the parameters mapping for this `Request`. "Parameters" are automatically decoded from the URI's query string and `POST` body and entered into this mapping. The `rqParams` value is thus a union of `rqQueryParams` and `rqPostParams`.

rqQueryParams :: Request -> Params

The parameter mapping decoded from the URI's query string.

rqPostParams :: Request -> Params

The parameter mapping decoded from the POST body. Note that Snap only auto-decodes POST request bodies when the request's `Content-Type` is `application/x-www-form-urlencoded`.

rqParam

Arguments

:: ByteString | parameter name to look up
-> Request | HTTP request
-> Maybe [ByteString] |

Looks up the value(s) for the given named parameter. Parameters initially come from the request's query string and any decoded POST body (if the request's `Content-Type` is `application/x-www-form-urlencoded`). Parameter values can be modified within handlers using rqModifyParams.

rqPostParam

Arguments

:: ByteString | parameter name to look up
-> Request | HTTP request
-> Maybe [ByteString] |

Looks up the value(s) for the given named parameter in the POST parameters mapping.

rqQueryParam

Arguments

:: ByteString | parameter name to look up
-> Request | HTTP request
-> Maybe [ByteString] |

Looks up the value(s) for the given named parameter in the query parameters mapping.

getParam

Arguments

:: MonadSnap m |
=> ByteString | parameter name to look up
-> m (Maybe ByteString) |

See `rqParam`. Looks up a value for the given named parameter in the `Request`. If more than one value was entered for the given parameter name, `getParam` gloms the values together with:

        intercalate " "

getPostParam

Arguments

:: MonadSnap m |
=> ByteString | parameter name to look up
-> m (Maybe ByteString) |

See `rqPostParam`. Looks up a value for the given named parameter in the POST form parameters mapping in `Request`. If more than one value was entered for the given parameter name, `getPostParam` gloms the values together with:

        intercalate " "

getQueryParam

Arguments

:: MonadSnap m |
=> ByteString | parameter name to look up
-> m (Maybe ByteString) |

See `rqQueryParam`. Looks up a value for the given named parameter in the query string parameters mapping in `Request`. If more than one value was entered for the given parameter name, `getQueryParam` gloms the values together with:

        intercalate " "

getParams :: MonadSnap m => m Params

See `rqParams`. Convenience function to return `Params` from the `Request` inside of a `MonadSnap` instance.

getPostParams :: MonadSnap m => m Params

See `rqParams`. Convenience function to return `Params` from the `Request` inside of a `MonadSnap` instance.

getQueryParams :: MonadSnap m => m Params

See `rqParams`. Convenience function to return `Params` from the `Request` inside of a `MonadSnap` instance.

rqModifyParams :: (Params -> Params) -> Request -> Request

Modifies the parameters mapping (which is a `Map ByteString ByteString`) in a `Request` using the given function.

rqSetParam

Arguments

:: ByteString | parameter name
-> [ByteString] | parameter values
-> Request | request
-> Request |

Writes a key-value pair to the parameters mapping within the given request.

## Responses

emptyResponse :: Response

An empty `Response`.

setResponseCode

Arguments

:: Int | HTTP response integer code
-> Response | Response to be modified
-> Response |

Sets the HTTP response code.

setResponseStatus

Arguments

:: Int | HTTP response integer code
-> ByteString | HTTP response explanation
-> Response | Response to be modified
-> Response |

Sets the HTTP response status. Note: normally you would use `setResponseCode` unless you needed a custom response explanation.

rspStatus :: Response -> Int

Returns the HTTP status code.

rspStatusReason :: Response -> ByteString

Returns the HTTP status explanation string.

setContentType :: ByteString -> Response -> Response

Sets the `Content-Type` in the `Response` headers.

addResponseCookie

Arguments

:: Cookie | cookie value
-> Response | response to modify
-> Response |

Adds an HTTP `Cookie` to `Response` headers.

getResponseCookie

Arguments

:: ByteString | cookie name
-> Response | response to query
-> Maybe Cookie |

Gets an HTTP `Cookie` with the given name from `Response` headers.

getResponseCookies

Arguments

:: Response | response to query
-> [Cookie] |

Returns a list of `Cookie`s present in `Response`

deleteResponseCookie

Arguments

:: ByteString | cookie name
-> Response | response to modify
-> Response |

Deletes an HTTP `Cookie` from the `Response` headers. Please note this does not necessarily erase the cookie from the client browser.

modifyResponseCookie

Arguments

:: ByteString | cookie name
-> (Cookie -> Cookie) | modifier function
-> Response | response to modify
-> Response |

Modifies an HTTP `Cookie` with given name in `Response` headers. Nothing will happen if a matching `Cookie` can not be found in `Response`.

expireCookie

Arguments

:: MonadSnap m |
=> ByteString | Cookie name
-> Maybe ByteString | Cookie domain
-> m () |

Expire the given `Cookie` in client's browser.

getCookie :: MonadSnap m => ByteString -> m (Maybe Cookie)

Gets the HTTP `Cookie` with the specified name.

readCookie :: (MonadSnap m, Readable a) => ByteString -> m a

Gets the HTTP `Cookie` with the specified name and decodes it. If the decoding fails, the handler calls pass.

setContentLength :: Int64 -> Response -> Response

A note here: if you want to set the `Content-Length` for the response, Snap forces you to do it with this function rather than by setting it in the headers; the `Content-Length` in the headers will be ignored.

The reason for this is that Snap needs to look up the value of `Content-Length` for each request, and looking the string value up in the headers and parsing the number out of the text will be too expensive.

If you don't set a content length in your response, HTTP keep-alive will be disabled for HTTP/1.0 clients, forcing a `Connection: close`. For HTTP/1.1 clients, Snap will switch to the chunked transfer encoding if `Content-Length` is not specified.

clearContentLength :: Response -> Response

Removes any `Content-Length` set in the `Response`.

redirect :: MonadSnap m => ByteString -> m a

Performs a redirect by setting the `Location` header to the given target URL/path and the status code to 302 in the `Response` object stored in a `Snap` monad. Note that the target URL is not validated in any way. Consider using 'redirect\'' instead, which allows you to choose the correct status code.

redirect' :: MonadSnap m => ByteString -> Int -> m a

Performs a redirect by setting the `Location` header to the given target URL/path and the status code (should be one of 301, 302, 303 or 307) in the `Response` object stored in a `Snap` monad. Note that the target URL is not validated in any way.

setBufferingMode

Arguments

:: Bool | if True, buffer the output, if False, send output immediately
-> Response |
-> Response |

The buffering mode controls whether Snap will buffer the output or not. You may wish to disable buffering when using Comet-like techniques which rely on the immediate sending of output data in order to maintain interactive semantics.

getBufferingMode :: Response -> Bool

The buffering mode controls whether Snap will buffer the output or not. You may wish to disable buffering when using Comet-like techniques which rely on the immediate sending of output data in order to maintain interactive semantics.

### Response I/O

setResponseBody

Arguments

:: (forall a. Enumerator Builder IO a) | new response body enumerator
-> Response | response to modify
-> Response |

Sets an HTTP response body to the given `Enumerator` value.

modifyResponseBody :: (forall a. Enumerator Builder IO a -> Enumerator Builder IO a) -> Response -> Response

Modifies a response body.

addToOutput

Arguments

:: MonadSnap m |
=> (forall a. Enumerator Builder IO a) | output to add
-> m () |

Adds the output from the given enumerator to the `Response` stored in the `Snap` monad state.

writeBuilder :: MonadSnap m => Builder -> m ()

Adds the given `Builder` to the body of the `Response` stored in the | `Snap` monad state.

writeBS :: MonadSnap m => ByteString -> m ()

Adds the given strict `ByteString` to the body of the `Response` stored in the `Snap` monad state.

Warning: This function is intentionally non-strict. If any pure exceptions are raised by the expression creating the `ByteString`, the exception won't actually be raised within the Snap handler.

writeLazyText :: MonadSnap m => Text -> m ()

Adds the given lazy `Text` to the body of the `Response` stored in the `Snap` monad state.

Warning: This function is intentionally non-strict. If any pure exceptions are raised by the expression creating the `ByteString`, the exception won't actually be raised within the Snap handler.

writeText :: MonadSnap m => Text -> m ()

Adds the given strict `Text` to the body of the `Response` stored in the `Snap` monad state.

Warning: This function is intentionally non-strict. If any pure exceptions are raised by the expression creating the `ByteString`, the exception won't actually be raised within the Snap handler.

writeLBS :: MonadSnap m => ByteString -> m ()

Adds the given lazy `ByteString` to the body of the `Response` stored in the `Snap` monad state.

Warning: This function is intentionally non-strict. If any pure exceptions are raised by the expression creating the `ByteString`, the exception won't actually be raised within the Snap handler.

sendFile :: MonadSnap m => FilePath -> m ()

Sets the output to be the contents of the specified file.

Calling `sendFile` will overwrite any output queued to be sent in the `Response`. If the response body is not modified after the call to `sendFile`, Snap will use the efficient `sendfile()` system call on platforms that support it.

If the response body is modified (using `modifyResponseBody`), the file will be read using `mmap()`.

sendFilePartial :: MonadSnap m => FilePath -> (Int64, Int64) -> m ()

Sets the output to be the contents of the specified file, within the given (start,end) range.

Calling `sendFilePartial` will overwrite any output queued to be sent in the `Response`. If the response body is not modified after the call to `sendFilePartial`, Snap will use the efficient `sendfile()` system call on platforms that support it.

If the response body is modified (using `modifyResponseBody`), the file will be read using `mmap()`.

## Timeouts

setTimeout :: MonadSnap m => Int -> m ()

Causes the handler thread to be killed `n` seconds from now.

extendTimeout :: MonadSnap m => Int -> m ()

Causes the handler thread to be killed at least `n` seconds from now.

modifyTimeout :: MonadSnap m => (Int -> Int) -> m ()

Modifies the amount of time remaining before the request times out.

getTimeoutAction :: MonadSnap m => m (Int -> IO ())

Deprecated: use getTimeoutModifier instead. Since 0.8.

Returns an `IO` action which you can use to set the handling thread's timeout value.

getTimeoutModifier :: MonadSnap m => m ((Int -> Int) -> IO ())

Returns an `IO` action which you can use to modify the timeout value.

# Iteratee

type Enumerator a m b = Step a m b -> Iteratee a m b

Enumerators are sources of data, to be consumed by iteratees. Enumerators typically read from an external source (parser, handle, random generator, etc), then feed chunks into an tteratee until:

- The input source runs out of data.
- The iteratee yields a result value.
- The iteratee throws an exception.

newtype SomeEnumerator

An existential wrapper for the 'Enumerator ByteString IO a' type

Constructors

SomeEnumerator (forall a. Enumerator ByteString IO a) |

# HTTP utilities

formatHttpTime :: CTime -> IO ByteString

Converts a `CTime` into an HTTP timestamp.

parseHttpTime :: ByteString -> IO CTime

Converts an HTTP timestamp into a `CTime`.

parseUrlEncoded :: ByteString -> Map ByteString [ByteString]

Parses a string encoded in `application/x-www-form-urlencoded` format.

buildUrlEncoded :: Map ByteString [ByteString] -> Builder

printUrlEncoded :: Map ByteString [ByteString] -> ByteString

urlEncode :: ByteString -> ByteString

URL-escapes a string (see http://tools.ietf.org/html/rfc2396.html#section-2.4)

urlEncodeBuilder :: ByteString -> Builder

URL-escapes a string (see http://tools.ietf.org/html/rfc2396.html#section-2.4) into a `Builder`.

urlDecode :: ByteString -> Maybe ByteString

Decodes an URL-escaped string (see http://tools.ietf.org/html/rfc2396.html#section-2.4)