#
WORDS Version 1.97FC
LATIN-ENGLISH DICTIONARY PROGRAM

SUMMARY
INSTALLATION
Is There a Problem?
INTRODUCTION
OPERATIONAL DESCRIPTION
Program Operation
Modes of Operation
Command Line Operation
Latin-to-English Examples
English-to-Latin Examples
Design of the Meaning Line
Signs and Abbreviations in Meaning
PROGRAM DESCRIPTION
Codes in Inflection Line
Help for Parameters
Special Cases
Uniques
Tricks
Trimming of uncommon results
GUIDING PHILOSOPHY
Purpose
Method
Word Meanings
Proper Names
Letter Conventions (u/v, i/j, w)
DICTIONARY
Dictionary Codes
AGE
AREA
GEO
FREQ
SOURCE
Current Distribution of DICTLINE Flags
Dictionary Conventions
Evolution of the Dictionary
Text Dictionary - DICTPAGE.TXT
Latin Spellchecking - Text Processor List - LISTALL.ZIP
INFLECTIONS
ENGLISH to LATIN
English Parsing of Meanings
Ordering English-to-Latin Output
TESTS AND STATUS
Testing
Current Status and Future Plans
USER MODIFICATIONS
Writing DICT.LOC and UNIQUES.LAT
DICT.LOC
UNIQUES.LAT
DEVELOPERS AND REHOSTING
Program source code and data
License
Rehosting WORDS
Feedback

##
SUMMARY

This program, WORDS, takes keyboard input or a file of Latin text lines and provides an analysis of each word individually. It uses an INFLECT.SEC, UNIQUES.LAT, ADDONS.LAT, STEMFILE.GEN, INDXFILE.GEN, and DICTFILE.GEN, and possibly .SPE and DICT.LOC.

The dictionary contains over 39000 entries, as would be counted in an ordinary dictionary. This expands to almost twice that number of individual stems (the count that the program may display at startup), and, through additional word construction with hundreds of prefixes and suffixes, may generate more, leading to many hundreds of thousands of 'words' that can be formed by declension and conjugation. This version of WORDS provides a tool to help in translations for the Latin student. It is now a large dictionary by any measure and can be helpful to advanced users. The dictionary will continue to grow - slowly.

##
INSTALLATION

The WORDS program, with its accompanying data files should run on any machine for which it is adapted, any monitor. Simply download the self-extracting EXE files or the compressed file for the appropriate system and execute/decompress it in your chosen subdirectory on the hard disk, creating the necessary files. Then call/run WORDS, or do as instructed in any README.

The load includes SPQR.ICO, a possible icon for WORDS, but just that, only an icon. You have to install the program as per the directions (put the downloaded files in a folder, run them to expand to the WORDS system, then run from that folder). However, If you are Windows-wise, you can use Explorer and make a shortcut and put it on the desktop. Windows will make a generic icon, but you can change it (using Properties) to whatever other icon you can find, for instance, the one included with the package. Or not. Make sure that the Properties on the icon has as Target the WORDS.EXE in the folder in which the system is loaded.

See the particular page for each specific system.
DOS
Windows 95/NT/98/2000/XP
Linux and FreeBSD
OS/2
MAC OS X

#### Is There a Problem?

Did you download the two appropriate file(s) to your hard disk, as listed in the download page for your system?

Can you verify that they are there and full size (megabytes as indicated)?

Did you execute/run/unzip these programs?

If self-extracted, were you asked where to put the generated files? (Maybe a default C:\WORDS)? If not, did you put them in the folder/subdirectory from which you wish to operate?

Can you verify that the full set of files (about 10 MB) was generated in that folder/subdirectory, or wherever you chose? At least WORDS.EXE, INFLECT.SEC, UNIQUES.LAT, ADDONS.LAT, STEMFILE.GEN, INDXFILE.GEN, and DICTFILE.GEN, plus documentation.

Did you run/execute WORDS in that folder/subdirectory? e.g.
C:\WORDS

If when you try to run there is no WORDS.EXE (or equivalent), the system should let you know.
If there is no INFLECTS.SEC, the program will say so and abort immediately.
If there are no dictionary files, the program will tell you, but will start (you can get Roman numerals!).
If there is no ADDONS.LAT or UNIQUES.LAT, the program will tell you, and if they are there it will tell you how many.

###
INTRODUCTION

I am no expert in Latin, indeed my training is limited to a couple of years in high school more than 50 years ago. But I always felt that Latin, as presented after two millennia, was a scientific language. It had the interesting property of inflection, words were constructed in a logical manner. I admired this feature, but could never remember the vocabulary well enough when it came time to exercise it on tests.

I decided to automate an elementary-level Latin vocabulary list. As a first stage, I produced a computer program that will analyze a Latin word and give the various possible interpretations (case, person, gender, tense, mood, etc.), within the limitations of its dictionary. This might be the first step to a full parsing system, but, although just a development tool, it is useful by itself.

Please remember that this is only a computer exercise in automating a Latin dictionary. I am not a Latin scholar and anything in the program or documentation is filtered by me from reading the cited Latin dictionaries. Please let no one go to his teacher and cite my interpretation as an authority.

While developing this initial implementation, based on different sources, I learned (or re-learned) something that I had overlooked at the beginning. Latin courses, and even very large Latin dictionaries, are put together under very strict ground rules. Some dictionary might be based exclusively on 'Classical' (200 BC - 200 AD) texts; it might have every word that appears in every surviving writing of Cicero, but nothing much before or since. Such a dictionary will be inadequate for translating medieval theological or scientific texts. In another example, one textbook might use Caesar as their main source of readings (my high school texts did), while another might avoid Caesar and all military writings (either for pacifist reasons, or just because the author had taught Caesar for 30 years and had grown bored with going over the same material, year after year). One can imagine that the selection of words in such different texts would differ considerably; moreover, even with the same words, the meanings attached would be different. This presents a problem in the development of a dictionary for general use.

One could produce a separate dictionary for each era and application or a universal dictionary with tags to indicate the appropriate application and meaning for each word. With such a tag arrangement one would not be offered inappropriate or improbable interpretations. The present system has such a mechanism, but it is not fully exploited.

The Version 1.97E dictionary may be found to be of fairly general use for the student; it has all the easy words that every text uses. It also has the adverbs, prepositions, and conjunctions, which are not as sensitive to application as are the nouns and verbs. The system also tests a few hundred prefixes and suffixes, if the raw word cannot be found. Beyond that, there are a large number of TRICKS which may be applied. These may be thought of as correcting for variations in spelling. This allows an interpretation of many words which would otherwise be marked unknown. The result of this analysis is fairly straightforward in most cases, accurate but esoteric in some others. Some constructions are recognized Latin words, and some are perfectly reasonable words which may never have been used by Cicero or Caesar but might have been used by Augustine or a monk of Jarrow. For about 1 in 10 constructed words the result has no relation to the normal dictionary meaning.

BE WARNED! The program will go to great lengths if all tricks are invoked. If you get a word formed with an enclitic, prefix, suffix, and syncope, be very suspicious! It my well be right, but look carefully. (Try siquempiamque!)

The final try is to look at the input as two words run together. In most cases this works out, and is especially useful for late Latin number usage. However, this algorithm may go very wrong. If it is not obviously right, it is probably incorrect.

With this facility, and a 39000 word dictionary, trials on some tested classical texts and the Vulgate Bible give hit rates of far better than 99%, excluding proper names (there are very few proper names in this dictionary). (I am an old soldier so the dictionary may have every possible word for attack or destroy. The system is near perfect for Caesar.) The question arises, what hit rate can be expected for a general dictionary. Classical Latin dictionaries have no references to the terminology of Christian theology. The legal documents and deeds of the Middle Ages are a challenge of jargon and abbreviations. These areas require special knowledge and vocabulary, but even there the ability to handle the non-specialized words is a large part of the effort.

The development system allows the inclusion of specialized vocabulary (for instance a SPEcial dictionary for specialized words not wanted in most dictionaries), and the opportunity for the user to add additional words to a DICT.LOC.

It was initially expected that there would be special dictionaries for special applications. That is why there is the possibility of a SPECIAL dictionary. Now the general dictionary is coded by AGE and application AREA. Thus special words used initially/only by St Thomas Aquinas would be Medieval (AGE code F) and Ecclesiastical (AREA code E). Eventually there needs to be a filter that allows one, upon setting parameters for Medieval and Ecclesiastical, to push those words over others. Right now there are not have enough non-classical vocabulary to rely on such a scheme. The problem is that one needs a very complete classical dictionary before one can assure that new entries are uniquely Medieval, that they are not just classical words that appear in a Medieval text. And the updated is only into the D's. So the situation is that the mechanism is there, but not sufficient data. Nevertheless that is exactly the application I had in mind when I set out to do the program.

One can set a parameter to exclude medieval words if there is a classical word answering the same parse. Likewise, the program can ignore rare meanings if there is a common meaning for the parse.

The program may be larger than is necessary for the present application. It is still in development but some effort has now been put into optimization. Nevertheless there is lots of room for speeding it up. Specifically, the program is disk-oriented is order to run on small machines, such as DOS with the 640KB limitation. Rejecting this limitation and assuming that the user has tens of megabytes of memory (clearly realistic today) would allow faster processing. The next version may go that way.

This is a free program, which means it is proper to copy it and pass it on to your friends. Consider it a developmental item for which there is no charge. However, just for form, it is Copyrighted (c). Permission is hereby freely given for any and all use of program and data. You can sell it as your own, but at least tell me.

This version is distributed without obligation, but the developer would appreciate comments and suggestions.

William A Whitaker
PO Box 3036
McLean VA 22103-3036
USA
whitaker@erols.com

###
OPERATIONAL DESCRIPTION

This write up is rudimentary and assumes that the user is experienced with computers, and as an example assumes a PC with a Windows OS. Other systems operate essentially the same.

The WORDS program, Version 1.97E, with it's accompanying data files should run on PC in Windows 95/98/NT, any monitor. Simply download the self-extracting EXE file and execute it in your chosen subdirectory/folder to UNZIP the files into a subdirectory of a hard disk. Then call WORDS.

There are a number of files associated with the program. These must be in the subdirectory/folder of the program, and the program must be run from that subdirectory. WORDS.EXE is the executable program. INFLECT.SEC holds the encoded inflection records. STEMFILE.GEN contains the stems of the GENERAL dictionary in a searchable form. DICTFILE.GEN is an indexed form of the GENERAL dictionary entries with form information and meanings. INDXFILE.GEN contains a set of indexes into the DICTFILE. In some versions, there may be a set of files for a SPECIAL (.SPE) dictionary of the same structure as the GENERAL dictionary, but there is no SPECIAL dictionary in the present distribution. A LOCAL dictionary may also be used. This is a limited dictionary of a different form, human readable and writeable. The knowledgeable user can augment and modify it on-line. It would consist of the file DICT.LOC. UNIQUES.LAT contains certain words which regular processing does not get. ADDONS.LAT contains the set of prefixes, suffixes and enclitics (-que, -ve) and the like. Other files may be generated by the program, so run it in a configuration that allows the creation of files.

All these files are necessary to run the program (except the optional dictionaries SPE and LOC). This excess of files is a consequence of the present developmental nature of the program. The files are very simple, almost human-readable. Presumably, a later version could condense and encode them. Nevertheless, beyond the original COPY, the user need not worry about them.

Additionally, there are files that the program may produce on request. All of these share the name WORD, with various extensions, and they are all ASCII/DOS text files which can be viewed and processed with an ordinary editor. The casual user may not want to get involved with these. WORD.OUT will record the whole output, WORD.UNK will list only words the program is unable to interpret. These outputs are turned on through the PARAMETERS mechanism.

PARAMETERS may be changed while running the program by inputting a line containing a '#' mark as the only (or first) character. Alternatively, WORD.MOD contains the MODES that can be set by CHANGE_PARAMETERS. If this file does not exist, default modes will be used. The file may be produced or changed when changing parameters. It can also be modified, if the user is sufficiently confident, with an editor, or deleted, thereby reverting to defaults.

There is another set of developers parameters which may be set with the input of '!'. These MODES may be changed and saved in a file WORD.MDV. These are not normal user facilities, probably no one but the developer would be interested. In any specific release these facilities may, or may not, work. They are just mentioned here in case they ever come up accidentally, and to point out that there are other capabilities, actual and possible, which may be invoked if there is a special need. The user is invited to review these parameters to see if any address an unusual need.

WORD.OUT is the file produced if the user requests output to a file. This output can be used for later manipulation with a text editor, especially when the input was a text file of some length. If the parameter UNKNOWNS_ONLY is set, the output serves as a sort of a Latin spell checker. Those words it cannot match may just not be in the dictionary, but alternatively they may be typos. A WORD.UNK file of unknowns can be generated.

#### Program Operation

To start the program, in the subdirectory that contains all the files, type WORDS. A setup procedure will execute, processing files. Then the program will ask for a word to be keyed in. Input the word and give a return (ENTER). Information about the word will be displayed.

One can input a whole line at a time, however long, but only one line since the return at the end of line will start the processing. If the results would fill more than a computer screen, the output is halted until the user responds to the 'MORE' message with a return. A file containing a text, a series of lines, can be input by keying in the character '@', followed (with no spaces) by the DOS name of the file of text. This input file need not be in the program subdirectory, just use the full path and name of the file. This is usually accompanied with the setting of the parameter switches to create and write to an output file, WORD.OUT.

One can have a comment in the file, a terminal portion of a line that is not parsed. This could be an English meaning, a source where the word was found, an indication that it may have been miscopied, etc. A comment begins with a double dash [--] and continues to the end of the line. The '--' and everything after on that line is ignored by the program.

A simple # character input at the start of a line (that is, a line containing only #) will permit the user to set modes to prevent the process from trying prefixes and suffixes to get a match on an item unknown to the dictionary, put output to a file, etc. Going into the CHANGE_PARAMETERS, the '?' character calls help for each entry.

Another set of parameters is invoked by the character !. These developer parameters are fairly specialized and are probably not required by the average user, nevertheless they are available for special applications.

Two successive returns with no text will terminate the program (except in text being read from an @ disk file.)

#### Modes of Operation

The mode of operation of WORDS can be specialized by setting some combination of available parameters. Here are a couple of example situations.

If you want only meanings to show up, set the # parameter
DO_ONLY_MEANINGS => Yes

If you do not even want to see the dictionary form (principle parts) set # parameter
DO_DICTIONARY_FORM => No

If you want to accept only the dictionary entry (amo, but not amas), set the ! parameter (this is the tricky one, requiring two parameters set)
DO_ONLY_INITIAL_WORD => Yes

This will ten require you to input one enrty per line, which is not unreasonable for a dictionary look-up process. Then you will be offered another, otherwise unavailable, option
FOR_WORD_LIST_CHECK => Yes

There are a large number of other options. The user is invited to consider all the options if needing anything more than the basic parse.

Of course, for both sets of parameters, you will want to go to the end of the parameter setting menu and save this set so you can restart with the same situation.

#### Command Line Operation

The main mode of usage for WORDS is a simple call, followed by screen interaction.

But there are other, command line, options. WORDS may be called with arguments on the same line, in a number of different modes. The program will execute with these arguments as input. Remember that the saved parameter settings (in WORD.MOD and WORD.MDV) are controlling, even for command line input.

Single argument, either a simple Latin word or an input file.

WORDS amo
which will cause it to execute for that input and then terminate. This is for a quick word.

WORDS infile
causes WORDS to execute with the contents of the inflie. The infile may be from any folder if the full path name is given.

With two arguments the options are: inputfile and outputfile, two Latin words, or a language shift to English (Latin being the startup default) and an English word (with no part of speech).

WORDS infile outfile
The program will read as input the INFILE and write the output to the OUTFILE (as though it were WORD.OUT). It will then await further input from the user. It terminates with a return. If the parameters are not legal file names, the program will assume they are Latin words to be processed as command line input.

WORDS amo amas

WORDS ^e love
switches to English input from the default Latin and searches for love.

With three arguments there could be three Latin words or a language shift and and English word and part of speech.

WORDS amo amas amat

WORDS ^e love v

More than three arguments must all be Latin words.

WORDS amo amas amat amamus amatis amant

There cannot be more than one English word in the argument list, since there can only be one English word per line for WORDS input.

An input file (either from interactive with @ or from command line) can have changes of language, but the ^E or ^L must be on a seperate line. Note that this capability can create confusing situations. An input file that starts off Latin then switches to English will be correctly processed. But if it is followed by a similiar input file, the second file will start off English (from the setting in the earlier file) and fail on the Latin input. Thus even submitting the same file twice in a run will give different results. Ithis problem can be alleviated by starting each input file with an explicit language instruction, but this will not normally be the situation.

#### Latin-to-English Examples

Following are annotated examples of output. Examination of these will give a good idea of the system. The present version may not match these examples exactly - things are changing - but the principle is there. A recent modification is the output of dictionary forms or 'principal parts' (shown below for some examples).

    =>agricolarum
    agricol.arum         N      1 1 GEN P M
    agricola, agricolae  N    M   [XAXBO]
    farmer, cultivator, gardener, agriculturist; plowman, countryman, peasant;

This is a simple first declension noun, and a unique interpretation. The '1 1' means it is first declension, with variant 1. This is an internal coding of the program, and may not correspond exactly with the grammatical numbering. The 'N' means it is a noun. It is the form for genitive (GEN), plural ('P'). The stem is masculine (M). The stem is given as 'agricol' and the ending is 'arum'. The stem is normal in this case, but is a product of the program, and may not always correspond to conventional usage.

On the next line is given the expansion of the form that one might find in a paper dictionary, the nominitive and genitive (agricola, agricolae). The [XAXBO] is an internal code of the program and is documented below as Dictionary Codes. Several codes are associated with each dictionary entry (presently AGE, AREA, GEO, FREQ, SOURCE). These provide some information to enhance the interpretation of the dictionary entry. In this case, the interesting piece is the B, which signifies that this word is found frequently in texts, in the top 10 percent. The O says it has been verified in the Oxford Latin Dictionary. The A says it is an agrigultural word.

The declension/conjugation numbers for nouns and verbs are essentially arbitary (but will be familiar to Latin students). The variants are complete inventions. They have no real meaning, just codes for the program.

(In the case of adjectives, they are even more arbitary, although a Latin student might see how I came by them. Again they are only codes for the program. The initial release of the program did not put these out, but there is some interest on the part of students, so they are now included. The user may ignore them altogether. There is no relation between the declension/variant codes of a noun and the accompaning adjective. They only agree in case, number, and gender (NOM S N), which are listed in the output.)

    =>feminae
    femin.ae             N      1 1 GEN S F
    femin.ae             N      1 1 DAT S F
    femin.ae             N      1 1 NOM P F
    femin.ae             N      1 1 VOC P F
    femina, feminae  N    F   [XXXAX]
    woman; female;

This word has several possible interpretations in case and number (Singular and Plural). The gender is Feminine. Presumably, the user can examine the adjoining words and reduce the set of possibilities.

    =>cornu
    corn.u               N      4 1 ABL S F
    cornus, cornus  N    F   [XXXCO]
    cornel-cherry-tree (Cornus mas); cornel wood; javelin (of cornel wood);
    corn.u               N      4 2 NOM S N
    corn.u               N      4 2 DAT S N
    corn.u               N      4 2 ABL S N
    corn.u               N      4 2 ACC S N
    cornu, cornus  N    N   [XXXAO]
    horn; hoof; beak/tusk/claw; bow; horn/trumpet; end, wing of army; mountain top;
    *

Here is an example of another declension and two variants. The Masculine (and few Feminine) (-us) nouns of the declension are '4 1' and the Neuter (-u) nouns are coded as '4 2'. This word has both. The horn parse is very frequent (A), while the cornel option (C) is less so but still common.

    =>ego
    ego                  PRON   5 1 NOM S C
     [XXXAX]
    I, me; myself;

A pronoun is much like a noun. The gender is common (C), that is, it may be masculine or feminine. For some odd words, especially including pronouns, there is no dictionary form given.

    =>illud
    ill.ud               PRON   6 1 NOM S N
    ill.ud               PRON   6 1 ACC S N
    ille, illa, illud  PRON   [XXXAX]
    that; those (pl.); also DEMONST; that person/thing; the well known; the former;
    *

The asterisk means that there are other, less probable forms which have been trimmed, but which may be recovered by running with the TRIM parameter reset.

    =>hic
    h.ic                 PRON   3 1 NOM S M
    hic, haec, hoc  PRON   [XXXAX]
    this; these (pl.); also DEMONST;
    hic                  ADV    POS
    hic                 ADV   [XXXCX]
    here, in this place; in the present circumstances;

In this case there is a adjectival/demonstrative pronoun, or it may be an adverb. The POS means that the comparison of the adverb is positive.

    =>bonum
    bon.um               N      2 1 ACC S M
    bonus, boni  N    M   [XXXCO]
    good/moral/honest/brave man; man of honor, gentleman; better/rich people (pl.);
    bon.um               N      2 2 NOM S N
    bon.um               N      2 2 ACC S N
    bonum, boni  N    N   [XXXAO]
    good, good thing, profit, advantage; goods (pl.), possessions, wealth, estate;
    bon.um               ADJ    1 1 NOM S N POS
    bon.um               ADJ    1 1 ACC S M POS
    bon.um               ADJ    1 1 ACC S N POS
    bonus, bona -um, melior -or -us, optimus -a -um  ADJ   [XXXAO]
    good, honest, brave, noble, kind, pleasant, right, useful; valid; healthy;
    *

Here we have an adjective, but it might also be a noun. The interpretation of the adjective says that it is POSitive, and that is the meaning listed, as is the convention for all dictionaries. The user must generate form this the meanings for other comparisons. Check the comparison value before deciding on the real meaning. Again, there is an asterisk, indicating further inflected forms were trimmed out.

    =>facile
    facil.e              ADJ    3 2 NOM S N POS
    facil.e              ADJ    3 2 ABL S X POS
    facil.e              ADJ    3 2 ACC S N POS
    facilis, facile, facilior -or -us, facillimus -a -um  ADJ   [XXXAX]
    easy, easy to do, without difficulty, ready, quick, good natured, courteous;
    facile               ADV    POS
    facile, facilius, facillime  ADV   [XXXBO]
    easily, readily, without difficulty; generally, often; willingly; heedlessly;
    *

Here is an adjective or and adverb. Although they are related in meaning, they are different words.

    =>acerrimus
    acerri.mus           ADJ    3 3 NOM S M SUPER
    acer, acris -e, acrior -or -us, acerrimus -a -um  ADJ   [XXXAO]
    sharp, bitter, pointed, piercing, shrill; sagacious, keen; severe, vigorous;

Here we have an adjective in the SUPERlative. The meanings are all POSitive and the user must add the -est by himself.

    =>optime
    optime               ADV    SUPER
    bene, melius, optime  ADV   [XXXAO]
    well, very, quite, rightly, agreeably, cheaply, in good style; better; best;
    opti.me              ADJ    1 1 VOC S M SUPER
    bonus, bona -um, melior -or -us, optimus -a -um  ADJ   [XXXAO]
    good, honest, brave, noble, kind, pleasant, right, useful; valid; healthy;

Here is an adjective or and adverb, both are SUPERlative.

    =>monuissemus
    monu.issemus         V      2 1 PLUP ACTIVE  SUB 1 P
    moneo, monere, monui, monitus  V   [XXXAX]
    remind, advise, warn; teach; admonish; foretell, presage;

Here is a verb for which the form is PLUPerfect, ACTIVE, SUBjunctive, 1st person, Plural. It is 2nd conjugation, variant 1.

    =>amat
    am.at                V      1 1 PRES ACTIVE  IND 3 S
    amo, amare, amavi, amatus  V   [XXXAO]
    love, like; fall in love with; be fond of; have a tendency to;

Another regular verb, PRESent, ACTIVE, INDicative.

    =>amatus
    amat.us              VPAR   1 1 NOM S M PERF PASSIVE PPL
    amo, amare, amavi, amatus  V   [XXXAO]
    love, like; fall in love with; be fond of; have a tendency to;
    amat.us              ADJ    1 1 NOM S M POS
    amatus, amata, amatum  ADJ   [XXXEO]    uncommon
    loved, beloved;

Here we have the PERFect, PASSIVE ParticiPLe, in the NOMinative, Singular, Masculine. In addition, there is the ADJective that is formed from this participle. If the ADJective is common, it will likely have its own dictionary entry. Sometimes there may be a special or idiomatic meaning not obvious from the verb, or the meaning may stray from the original. In this case, the verb is very frequent, but the use as a adjective is uncommon.

    =>amatu
    amat.u               SUPINE 1 1 ABL S N
    amo, amare, amavi, amatus  V   [XXXAO]
    love, like; fall in love with; be fond of; have a tendency to;

Here is the SUPINE of the verb in the ABLative Singular.

    =>orietur
    ori.etur             V      4 1 FUT          IND 3 S
    orior, oriri, oritus sum  V    DEP   [XXXAO]
    rise (sun/river); arise/emerge, crop up; get up (wake); begin; originate from;
    be born/created; be born of, decend/spring from; proceed/be derived (from);
    ori.etur             V      3 1 FUT          IND 3 S
    orior, ori, ortus sum  V    DEP   [XXXBO]
    rise (sun/river); arise/emerge, crop up; get up (wake); begin; originate from;
    be born/created; be born of, decend/spring from; proceed/be derived (from);

For DEPondent verbs the passive form is to be translated as if it were active voice, so there is no VOICE given in the output.

    =>ab
    ab                   PREP   ABL
    ab  PREP  ABL   [XXXAO]
    by (agent), from (departure, cause, remote origin/time); after (reference);

Here is a PREPosition that takes an ABLative for an object.

    =>sine
    sin.e                N      2 2 NOM P N
    sin.e                N      2 2 ACC P N
    sinum, sini  N    N   [XXXCX]
    bowl for serving wine, etc;
    sin.e                V      3 1 PRES ACTIVE  IMP 2 S
    sino, sinere, sivi, situs  V   [XXXAX]
    allow, permit;
    sine                 PREP   ABL
    sine  PREP  ABL   [XXXAX]
    without;
    *

Here is a PREPosition that might also be a Verb or a Noun. While as a preperation it is so common that it is unlikely that any other use would occur, there is no way to indicate that. Just be reminded that the frequency given for a verb is for the sum of all the couple of hundred forms of the verb, not just the one form that is parsed.

    =>contra
    contra               ADV    POS
    contra              ADV   [XXXAO]
    facing, face-to-face, in the eyes; towards/up to; across; in opposite direction;
    against, opposite, opposed/hostile/contrary/in reply to; directly over/level;
    otherwise, differently; conversely; on the contrary; vice versa;
    contra               PREP   ACC
    contra  PREP  ACC   [XXXAO]
    against, facing, opposite; weighed against; as against; in resistance/reply to;
    contrary to, not in conformance with; the reverse of; otherwise than;
    towards/up to, in direction of;  directly over/level with; to detriment of;

Here is a PREPosition that might also be an ADVerb. This is a very common situation, with the meanings being much the same.

    =>et
    et                   CONJ
    et                  CONJ   [XXXAX]
    and, and even; also, even;  (et ... et = both ... and);

Here is a straight CONJunction.

    =>vae
    vae                  INTERJ
    vae                 INTERJ   [XXXBX]
    alas, woe, ah; oh dear;  (Vae, puto deus fio - Vespasian); Bah!, Curses!;

Here is a straight INTERJection.

    =>septem
    septem               NUM    2 0 X   X X CARD
    septem, septimus -a -um, septeni -ae -a, septie(n)s  NUM   [XXXAX]
     7 - (CARD answers 'how many');

Numbers are recognized as such and given a value. An additional provision is the attempt to recognize and display the value of Roman numerals, even combinations of appropriate letters that do not parse conventionally to a value but may be ill-formed Roman numerals.

    =>VII
    VII                  NUM    2 0 X   X X CARD
    7  as a ROMAN NUMERAL;

Beyond simple dictionary entry words, the program can construct additional words with prefixes, suffixes and other ADDONS.

    =>populusque
    que                  TACKON
    -que = and (enclitic, translated before attached word); completes plerus/uter;
    popul.us             N      2 1 NOM S M
    populus, populi  N    M   [XXXAO]
    people, nation, State; public/populace/multitude/crowd; a following;
    members of a society/sex; region/district (L+S); army (Bee);

Here the input word is recognized as a combination of a base word and an enclitic (-que) tacked on. This particular enclitic is extremely common and its omission, or the omission of the process that handles it, would result in an very large number of UNKNOWNs in the output.

    =>pseudochristus
    pseudo               PREFIX
    false, fallacious, deceitful; sperious; imitation of;
    christ.us            N      2 1 NOM S M
    Christus, Christi  N    M   [XEXAO]
    Christ;

Here there is a prefix and a base. The user must make the combination into a word or phrase.

Generally, the meaning is given for the base word, as is usual for dictionaries. For the verb, it will be a present meaning, even when the tense given is perfect. For a noun, it will be the singular, and the user must interpret when the form is plural.

For an adjective, the positive meaning is given, even if a comparative or superlative form is output. The user is invited to expand to comparative (-er) and superlative (-est). For a few adjectives, the only stem in the dictionary is COMP or SUPER. When there is just one comparison, the WORDS dictionary gives that expanded meaning. This might be considered inconsistant, in that it expects the user to observe the FORM to interpret the meaning, but it is consisent with ordinary dictionary practice.

Initially there were more defective adjective entries. I had accepted assertions in OLD or L+S and others like 'comparative does not exist'. Later on I went over to the position that even if theCicero did not use it, someone might. I started generating COMP and SUPER where it seemed reasonable. One can also count on a suffix to correct most omissions, and it will.

Sometimes a word is constructed from a suffix and a stem of a different part of speech. Thus an adverb may be constructed from its adjective. It will show the base adjective meaning and an indication of how to make the adverb in English. The user must make the proper interpretation.

In some cases an adjective will be found that is a participle of a verb that is also found. The participle meaning, as inferred by the user from the verb meaning, is not superseded by the explicit adjective entry, but supplemented by it with possible specialized meanings.

#### English-to-Latin Examples

~E (tilde E/e plus Enter/CR) changes mode from Latin-to-English to English-to-Latin. ~L changes back.

A single input English word is followed by the desired part of speech. Omitting the part of speech defaults to all, which is not recommended for any word which can be ambiguous. Since the program is looking for a part of speech, it would be inconvenient to support the input of several English words on a line. While a (@) file of words can be processed in the English mode, it must be one word per line.

Output looks much like a paper dictionary entry, with form, part of speech, gender, etc. Also included are the WORDS coded declension/conjugation and the TRANS flags, which give age, frequency and source, information for the user in selecting the best trnslation. The output may also contain a vertical bar leading the meaning. This is a continuation symbol which states that there are other meanings for the Latin word. The user might want to run the Latin phase of WORDS to get the full set of meanings so that no unintended conflicts appear.

    love v

    amo, amare, amavi, amatus  V     1 1 [XXXAO]
    love, like; fall in love with; be fond of; have a tendency to;

    diligo, diligere, dilexi, dilectus  V     3 1 [XXXAX]
    select, pick, single out; love, value, esteem; approve, aspire to, appreciate;

    amo, amare, additional, forms  V     9 1 [BXXEO]
    love, like; fall in love with; be fond of; have a tendency to;

    ardeo, ardere, arsi, arsus  V     2 1 [XXXAO]
    be on fire; burn, blaze; flash; glow, sparkle; rage; be in a turmoil/love;

    adamo, adamare, adamavi, adamatus  V     1 1  TRANS   [XXXBO]
    fall in love/lust with; love passionately/adulterously; admire greatly; covet;

    deamo, deamare, deamavi, deamatus  V     1 1  TRANS   [XXXCO]
    love dearly; be passionately/desperately in love with; be delighted with/obliged
    *

    in prep

    in  PREP  ABL    [XXXAX]
    in, on, at (space); in accordance with/regard to/the case of; within (time);

    ante  PREP  ACC    [XXXAO]
    in front/presence of, in view; before (space/time/degree); over against, facing;

    super  PREP  ABL    [XXXAX]
    over (space), above, upon, in addition to; during (time); concerning; beyond;

    in  PREP  ACC    [XXXAX]
    into; about, in the mist of; according to, after (manner); for; to, among;

    prae  PREP  ABL    [XXXAX]
    before, in front; in view of, because of;

    praeter  PREP  ACC    [XXXAX]
    besides, except, contrary to; beyond (rank), in front of, before; more than;
    *

    in

    intro               ADV    [XXXAX]
    within, in; to the inside, indoors;

    in  PREP  ABL    [XXXAX]
    in, on, at (space); in accordance with/regard to/the case of; within (time);

    gener, generi  N     2 3  M   [XXXBX]
    son-in-law;

    baro, baronis  N     3 1  M   [XXXBL]
    baron; magnate; tenant-in-chief (of crown/earl); burgess; official; husband;

    sororius, sorori(i)  N     2 4  M   [XXXCX]
    sister's husband, brother-in-law;

    socrus, socrus  N     4 1  M   [XXXCX]
    father-in-law; spouse's grandfather/great grandfather;
    *

    kill v

    occido, occidere, occidi, occisus  V     3 1 [XXXAX]
    kill, murder, slaughter, slay; cut/knock down; weary, be the death/ruin of;

    interficio, interficere, interfeci, interfectus  V     3 1 [XWXAX]
    kill; destroy;

    consumo, consumere, consumpsi, consumptus  V     3 1  TRANS   [XXXAO]
    burn up, destroy/kill; put end to; reduce/wear away; annul; extinguish (right);

    perago, peragere, peregi, peractus  V     3 1 [XXXAX]
    disturb; finish; kill; carry through to the end, complete;

    dejicio, dejicere, dejeci, dejectus  V     3 1  TRANS   [XXXAS]
    |overthrow, bring down, depose; kill, destroy; shoot/strike down; fell (victim);

    deicio, deicere, dejeci, dejectus  V     3 1  TRANS   [XXXAO]
    |overthrow, bring down, depose; kill, destroy; shoot/strike down; fell (victim);
    *

    death n

    mors, mortis  N     3 3  F   [XXXAX]
    death; corpse; annihilation;

    fatum, fati  N     2 2  N   [XPXAX]
    utterance, oracle; fate, destiny; natural term of life; doom, death, calamity;

    funus, funeris  N     3 2  N   [XXXAX]
    burial, funeral; funeral rites; ruin; corpse; death;

    nex, necis  N     3 1  F   [XXXBX]
    death; murder;

    letum, leti  N     2 2  N   [XXXBX]
    death, ruin, annihilation; death and destruction;

    Orcus, Orci  N     2 1  M   [XXXBX]
    god of the underworld, Dis; death; the underworld;
    *

    destruction n

    cinis, cineris  N     3 1  C   [XXXAO]
    ashes; embers, spent love/hate; ruin, destruction; the grave/dead, cremation;

    pestis, pestis  N     3 3  F   [XXXBX]
    plague, pestilence, curse, destruction;

    exitium, exiti(i)  N     2 4  N   [XXXBX]
    destruction, ruin; death; mischief;

    ruina, ruinae  N     1 1  F   [XXXBX]
    fall; catastrophe; collapse, destruction;

    interitus, interitus  N     4 1  M   [XXXBX]
    ruin; violent/untimely death, extinction; destruction, dissolution;

    excidium, excidi(i)  N     2 4  N   [XXXCX]
    ruin, destruction, military destruction; overthrow;
    *

While six prioritized translations may seem like enough, and they will likely cover the needs of a student, the full set (setting # parameter to not TRIM) contains much valuable information for the advanced translator. For instance for the verb live vivo usually works, but there are other options associated with specific situations: cohabito meand live together, ruror means live in the country, adjaceo means live near, judaizo means live in the Jewish manner keeping the law. These sorts of meanings are often conveyed in Latin by a single word, while in English one might just use live and a modifing word or phrase.

#### Design of the Meaning Line

The role and complexity of the WORDS meaning line has evolved over time. Initially it reflected an elementry, back-of-the-book, textbook dictionary with a single word or two for each entry. Nevertheless, the size of the MEAN element was set at 80 characters (as God, Holerith and IBM decreed), as appropriate for a standard computer screen in text mode. (Depending on the system and mode of display, the output may be limited to 78 or 79 characters, but the traditional 80 characters of the century-old IBM card was chosen. They will likely appear on printed output.)

With expansion of the dictionary beyond a few thousand elementary seentries and the extensive inclusion of the Oxford dictionaries, a much larger set of possible interpretations surfaced for many words, filling and exceeding the 80 character limit. A certain disipline was introduced to structure the line.

Through the many phases of development of the dictionary, standards were developed and modified and rigor was not always maintained, therefore the rules below are generally, but not universally, observed. Evolution of the dictionary is bringing it more closely in line with these rules.

A decision was made to include as many meanings and synonyms as convenient. The OLD will sometimes list a dozen or more meaning groups with notably different senses, each with several similiar meanings. Presumably these different meanings were the product of different translations of the Latin word, different translators, different context, and different eras. The WORDS dictionary includes many of these synonyms, and specifically adds some more modern ones, in order to give the user inspiration for his translation. Further, it is important to give the user the full flavor of the word that various translations employ. A word with a nominal meaning of respect may be found to also mean fear (which may be the basis of all respect for the Romans), and that will certainly color the interpretation of a passage. Going the other way, one might not want to apply it to a discription of Mother Teressa. Also one should be warned if an otherwise simple word also is used as a rude reference to female anatomy.

There are a couple of other factors that may influence the user in determining the appropriate meaning from the list. Some words have different meanings depending on the age. If one is reading a text written recently in modern Latin, one must consider hints about the meaning. While the classical meaning, the WORDS default, may be appropriate, if there is a line with a late AGE code or an indication of a modern dictionary source (e.g,. Cal), the user should take this into consideration.

##### Signs and Abbreviations in Meaning

, [comma] is used to separate meanings that are similar. The philosophy has been to list a number of synonyms just to key the reader in making his translation.
; [semicolon] is used to separate sets of meanings that differ in intent. This is just a general tendency and is not always rigorously enforced.
: [colon] is used with an AREA code to specify a single special meaning appropriate for that AREA in a series of general meanings. For example, L: has the same impact as (legal) before or after a defination in meaning. This supplements the use of the AREA code in the set of flags, which implies that all or most of the meanings are associated with that area.
/ [solidus] means 'or' or gives an alternative word. It sometimes replaces the comma and is often used to compress the meaning into a short line.
(...) [parentheses] set off and optional word or modifier, e.g., '(nearly) white' means 'white' or 'nearly white', (matter in) dispute means either the matter in dispute or the dispute itself. They are also used to set off an explanation, further information about the word or meaning, or an example of a translation or a word combination.
? [question mark] in a meaning implies a doubt about the interpretation, or even about the existence of the word at all. For the purposes of this program, it does not matter much. If the dubious word does not exist, no one will ask for it. If it appears in his text, the reader is warned that the interpretation may be questionable to some degree, but is what is available. May indicate somewhat more doubt than (perh.).
~ [tilde] stands for the stem or word in question. Usually it does not have an ending affixed, as is the convention in other dictionaries, but represents the word with whatever ending is proper. It is just a space saving shorthand or abbreviation.
{~ [tilde] also is the flag for changing the language base. ~E (plus Enter/CR) changes from Latin-to-English to English-to-Latin. ~L changes back.)
=> in meaning this indicates a translation example.
abb. abbreviation.
(Dif) - [Diferrari] is used to indicate an additional meaning taken from A Latin-English Dictionary of St. Thomas Aquinas by Roy J. Diferrari. This is singled out because of the importance of Aquinas. The reference is to be applied from the last semicolon before the mark. It is likely that the meaning diverges from the base by being medieval and ecclesiastical, but not so overwhelming as to deserve a separate entry.
(Douay) is used to designate those words for which the meaning has been derived or modified by examination of the Douay translation of the Latin Vulgate Bible of St Jerome.
(eccl.) ecclesiastical - designating a special church meaning in a list of conventional meanings, an additional meaning not sufficient to justify a separate entry with an ecclesiastical code.
esp. [especially] - indicates a significant association, but is only advisory.
(King James) or (KJames) is used to designate those words for which the meaning has been derived or modified by examination of the King James Bible in connection with the Latin Vulgate Bible of St Jerome.
(KLUDGE) This indicates that the particular form is distorted in order to make it come out correctly. This usually takes the form of a special conjugational form applied to a few words, not applicable to other words of the same conjugation or declension. The user can expect the form and meaning to be correct, but the numerical coding will be odd.
(L+S) [Lewis and Short] is used to indicate that the meaning starting from the previous semicolon is information from Lewis and Short 'A Latin Dictionary' that differs from, or significantly expands on, the meaning in the 'Oxford Latin Dictionary' (OLD) which is the baseline for this program. This is not to imply that the meaning listed is otherwise taken directly from the OLD, just that it is not inconsistent with OLD, but the L+S information either inconsistent (likely OLD knows better) or Lewis and Short has included meanings appropriate for late Latin writers beyond the scope of OLD. The program is just warning the reader that there may be some difference. There are cases in which this indication occurs in entries that have Lewis and Short as the source. In those cases, the basic word is in OLD but the entry is a variant form or spelling not cited there. There are cases where OLD and L+S give somewhat different spellings and meanings for the 'same' word (same in the sense that both dictionaries point to the same citation). In these cases a combination of meanings are given for both entries with the (L+S) code distinction and the entries of different spelling or declension have the SOURCE coded.
NT [New Testament] is a reference in the Bible.
(OLD) [Oxford Latin Dictionary] is used to indicate an additional meaning taken from the Oxford Latin Dictionary in an entry that is otherwise attributed. While it is usually true that if a classical word has other than OLD as the listed source then it does not appear in that form in OLD, this is not always the case. On occasion some other dictionary gives a much better or more complete and understandable definition and the honor of source is thereto given.
OT [Old Testament] is a reference in the Bible.
Other source indicators are occasionally used and are indicated in the general discription of SOURCE below.
(PASS) [passive] - indicates a special, unexpected meaning for the passive form of the verb, not easily associated with the active meaning. In addition this is often used to remind the user that compounds of facio form the passive by using the active of fio. Ex: calefio (calefacio PASS). There may be more translation information in the base word cited and the user is encouraged to refer to it.
perh. [perhaps] - denotes an additional uncertainty, but not as strong as (?).
(pl.) [plural] means that the Latin word is believed by scholars to be used (almost) always in the plural form, with the meaning stated, even though that meaning in English may be singular. If it appears in the beginning of the meaning, before the first comma, it applies to all the meanings. If it appears later, it applies only to that and later meanings. For the purpose of this program, this is only advisory. While it is used by some tools to find the expected dictionary entry, the program does not necessarily exclude a singular form in the output. While it may be true that in good, classical Latin it is never used in the singular, this does not mean that some text somewhere might not use the singular, nor that it is uncommon in later Latin. The TRIM_OUTPUT option may cause only plural forms to appear, with no TRIM_OUTPUT the singular will be shown.
prob. [probably] - denotes some uncertainty, but not as much as (perh.).
pure Latin ... indicates a pure Latin term for a word which is derived from another language (almost certainly Greek).
(rude) - indicates that this meaning was used in a rude, vulgar, coarse, or obscene manner, not what one should hear in polite company. Such use is likely from graffiti or epigrams, or in plays in which the dialogue is to indicate that the characters are low or crude. Meanings given by the program for these words are more polite, and the user is invited to substitute the current street language or obscenity of his choice to get the flavor of text.
(sg.) [singular] means that the Latin word is believed by scholars to be used always in the singular. If it appears in the beginning of the meaning, before the first comma, it applies to all the meanings. If it appears later, it applies only to that and later meanings. For the purpose of this program, this is only advisory.
usu. [usually] is weakly advisory. (usu. pl.) is even weaker than (pl.) and may imply that the plural tendency occurred only during certain periods.
w/ means 'with'.

###
PROGRAM DESCRIPTION

A effect of the program is to derive the structure and meaning of individual Latin words. A procedure was devised to: examine the ending of a word, compare it with the standard endings, derive the possible stems that could be consistent, compare those stems with a dictionary of stems, eliminate those for which the ending is inconsistent with the dictionary stem (e.g., a verb ending with a noun dictionary item), if unsuccessful, it tries with a large set of prefixes and suffixes, and various tackons (e.g., -que), finally it tries various 'tricks' (e.g., 'ae' may be replaced by 'e', 'inp...' by 'imp...', syncope, etc.), and it reports any resulting matches as possible interpretations.

With the input of a word, or several words in a line, the program returns information about the possible accedience, if it can find an agreeable stem in its dictionary.

    =>amo
    am.o               V       1  1 PRES ACTIVE  IND  1 S
    love, like; fall in love with; be fond of; have a tendency to

To support this method, an INFLECT.SEC data file was constructed containing possible Latin endings encoded by a structure that identifies the part of speech, declension, conjugation, gender, person, number, etc. This is a pure computer encoding for a 'brute force' search. No sophisticated knowledge of Latin is used at this point. Rules of thumb (e.g., the fact, always noted early in any Latin course, that a neuter noun has the same ending in the nominative and accusative, with a final -a in the plural) are not used in the search. However, it is convenient to combine several identical endings with a general encoding (e.g., the endings of the perfect tenses are the same for all verbs, and are so encoded, not replicated for every conjugation and variant).

Many of the distinguishing differences identifying conjugations come from the voiced length of stem vowels (e.g., between the present, imperfect and future tenses of a third conjugation I-stem verb and a fourth conjugation verb). These aural differences, the features that make Latin 'sound right' to one who speaks it, are not relevant in the analysis of written endings.

The endings for the verb conjugations are the result of trying to minimize the number of individual endings records, while yet keeping the structure of the inflections data file fairly readable. There is no claim that the resulting arrangement is consonant with any grammarian's view of Latin, nor should it be examined from that viewpoint. While it started from the conjugations in text books, it can only be viewed as some fuzzy intermediate step along a path to a mathematically minimal number of encoded verb endings. Later versions of the program might improve the system.

There are some egregious liberties taken in the encoding. With the inclusion of two present stems, the third conjugation I-stem verbs may share the endings of the regular third conjugation. The fourth conjugation has disappeared altogether, and is represented internally as a variant of the third conjugation (3, 4), but this is replaced for the user in output by 4 1. There is an artificial fifth conjugation for esse and others, a sixth for eo, and a seventh for other irregularities.

As an example, a verb ending record has the structure:
PART -- the part code for a verb = V;
CONjugation -- consisting of two parts:
WHICH -- a conjugation identifier - range 0..9 and
VAR -- a variant identifier on WHICH - range 0..9;
TENSE -- an enumeration type - range PRES..FUTP + X;
VOICE -- an enumeration type - range ACTIVE..PASSIVE + X;
MOOD -- an enumeration type - range IND..PPL + X;
PERSON -- person, first to third - range 1..3 + 0;
NUMBER -- an enumeration type - range S..P + X;
KEY -- which stem to be used - range 1..4;
SIZE -- number of characters - range 0..9;
ENDING -- the ending as a string of SIZE characters;
AGE and FREQ flags which are not usually visible to the user.

Thus, the entry for the ending appropriate to 'amo' (with STEM = am) is:

    V 1 1 PRES IND ACTIVE 1 S X 1 o

The elements are straightforward and generally use the abbreviations that are common in any Latin text. An X or 0 represents the 'don't know' or 'don't care' for enumeration or numeric types. Details are documented below in the CODES section.

A verb dictionary record has the structure:
STEMS -- for a verb there are 4 stems;
PART -- part code for a verb = V
WHICH -- a conjugation identifier - range 0..9
VAR -- a variant identifier - range 0..9;
KIND -- enumeration type of verb - range TO_BE..PERFDEF + X;
AGE, AREA, GEO, FREQ, and SOURCE flags
MEANING -- text for English translations (up to 80 characters).

Thus, an entry corresponding to 'amo amare amavi amatus' is:

    am am amav amat
    V 1 1 X            X X X X X
    love, like; fall in love with; be fond of; have a tendency to

Endings may not uniquely determine which stem, and therefore the right meaning. 'portas' could be the accusitive plural of 'gate', or the second person, singular, present indicative active of 'carry'. In both cases the stem is 'port'. All possibilities are reported.

    portas
    port.as V 1 1 PRES IND ACTIVE 2 S X
    carry, bring

    port.as N 1 1 ACC P F T
    gate, entrance; city gates; door; avenue;

And note that the same stem (port) has other uses (portus = harbor).

    portum
    port.um N 4 1 ACC S M T
    port, harbor; refuge, haven, place of refuge

PLEASE NOTE: It is certainly possible for the program to find a valid Latin construction that fits the input word and to have that interpretation be entirely wrong in the context. It is even possible to interpret a number, in Roman numerals, as a word! (But the number would be reported also.)

For the case of defective verbs, the process does not necessarily have to be precise. Since the purpose is only to translate from Latin, even if there are unused forms included in the algorithm these will not come up in any real Latin text. The endings for the verb conjugations are the result of trying to minimize the number of individual endings records, while keeping the structure of the base INFLECTIONS data file fairly readable.

In general the program will try to construct a match with the inflections and the dictionaries. There are some specific checks to reject certain mathematically correct combinations that do not appear in the language, but these checks are relatively few. The philosophy has been to allow a generous interpretation. A remark in a text or dictionary that a particular form does not exist must be tempered with the realization that the author probably means that it has not been observed in the surviving classical literature. This body of reference is minuscule compared to the total use of Latin, even limited to the classical period. Who is to say that further examples would not turn up such an example, even if it might not have been approved of by Cicero. It is also possible that such reasonable, if 'improper', constructs might occur in later writings by less educated, or just different, authors. Certainly English shows this sort of variation over time.

If the exact stem is not found in the dictionary, there are rules for the construction of words which any student would try. The simplest situation is a known stem to which a prefix or suffix has been attached. The method used by the program (if DO_FIXES is on, default is Yes) is to try any fixes that fit, to see if their removal results in an identifiable remainder. Then the meaning is mechanically implied from the meaning of the fix and the stem. The user may need to interpret with a more conventional English usage. This technique improves the hit performance significantly. However, in about 40% of the instances in which there is a hit, the derivation is correct but the interpretation takes some imagination. In something less than 10% of the cases, the inferred fix is just wrong, so the user must take some care to see if the interpretation makes any sense.

This method is complicated by the tendency for prefixes to be modified upon attachment (ab+fero = aufero, sub+fero = suffero). The program's 'tricks' take many such instances into account. Ideally, one should look inside the stem for identifiable fragments. One would like to start with the smallest possible stem, and that is most frequently the correct one. While it is mathematically possible that the stem of 'actorum' is 'actor' with the common inflection 'um', no intuitive first semester Latin student would fail to opt for the genitive plural 'orum', and probably be right. To first order, the procedure ignores such hints and may report this word in both forms, as well as a verb participle. However, it can use certain generally applicable rules, like the superlative characteristic 'issim', to further guess.

In addition, there is the capability to examine the word for such common techniques as syncope, the omission of the 've' or 'vi' in certain verb perfect forms (audivissem = audissem).

If the dictionary can not identify a matching stem, it may be possible to derive a stem from 'nearby' stems (an adverb from an adjective is the most common example) and infer a meaning. If all else fails, a portion of the possible dictionary stems can be listed, from which the user can draw in making his own guess.

#### Codes in Inflection Line

For completeness, the enumeration codes used in the output are listed here from the Ada statements. Simple numbers are used for person, declension, conjugations, and their variants. Not all the facilities implied by these values are developed or used in the program or the dictionary. This list is only for Version 1.97E. Other versions may be somewhat different. This may make their dictionaries incompatible with the present program.

NOTE: in print dictionaries certain information is conveyed by font encoding, e.g., the use of bold face or italics. There is no system independent method of displaying such on computers (although individual programs can handle these, each in it own unique way). WORDS uses capital letters to express some such differences, which method is system independent in present usage.

     type PART_OF_SPEECH_TYPE
              X,         --  all, none, or unknown
              N,         --  Noun
              PRON,      --  PRONoun
              PACK,      --  PACKON -- artificial for code
              ADJ,       --  ADJective
              NUM,       --  NUMeral
              ADV,       --  ADVerb
              V,         --  Verb
              VPAR,      --  Verb PARticiple
              SUPINE,    --  SUPINE
              PREP,      --  PREPosition
              CONJ,      --  CONJunction
              INTERJ,    --  INTERJection
              TACKON,    --  TACKON --  artificial for code
              PREFIX,    --  PREFIX --  here artificial for code
              SUFFIX     --  SUFFIX --  here artificial for code

      type GENDER_TYPE
              X,         --  all, none, or unknown
              M,         --  Masculine
              F,         --  Feminine
              N,         --  Neuter
              C          --  Common (masculine and/or feminine)

      type CASE_TYPE
              X,         --  all, none, or unknown
              NOM,       --  NOMinative
              VOC,       --  VOCative
              GEN,       --  GENitive
              LOC,       --  LOCative
              DAT,       --  DATive
              ABL,       --  ABLative
              ACC        --  ACCusitive

      type NUMBER_TYPE
              X,         --  all, none, or unknown
              S,         --  Singular
              P          --  Plural

      type PERSON_TYPE is range 0..3;

      type COMPARISON_TYPE
              X,         --  all, none, or unknown
              POS,       --  POSitive
              COMP,      --  COMParative
              SUPER      --  SUPERlative

      type NUMERAL_SORT_TYPE
             X,          --  all, none, or unknown
             CARD,       --  CARDinal
             ORD,        --  ORDinal
             DIST,       --  DISTributive
             ADVERB      --  numeral ADVERB

      type TENSE_TYPE
              X,         --  all, none, or unknown
              PRES,      --  PRESent
              IMPF,      --  IMPerFect
              FUT,       --  FUTure
              PERF,      --  PERFect
              PLUP,      --  PLUPerfect
              FUTP       --  FUTure Perfect

      type VOICE_TYPE
              X,         --  all, none, or unknown
              ACTIVE,    --  ACTIVE
              PASSIVE    --  PASSIVE

      type MOOD_TYPE
              X,         --  all, none, or unknown
              IND,       --  INDicative
              SUB,       --  SUBjunctive
              IMP,       --  IMPerative
              INF,       --  INFinative
              PPL        --  ParticiPLe

      type NOUN_KIND_TYPE
              X,            --  unknown, nondescript
              S,            --  Singular "only"           --  not really used
              M,            --  plural or Multiple "only" --  not really used
              A,            --  Abstract idea
              G,            --  Group/collective Name -- Roman(s)
              N,            --  proper Name
              P,            --  a Person
              T,            --  a Thing
              L,            --  Locale, name of country/city
              W             --  a place Where

      type PRONOUN_KIND_TYPE
              X,            --  unknown, nondescript
              PERS,         --  PERSonal
              REL,          --  RELative
              REFLEX,       --  REFLEXive
              DEMONS,       --  DEMONStrative
              INTERR,       --  INTERRogative
              INDEF,        --  INDEFinite
              ADJECT        --  ADJECTival

       type VERB_KIND_TYPE
              X,         --  all, none, or unknown
              TO_BE,     --  only the verb TO BE (esse)
              TO_BEING,  --  compounds of the verb to be (esse)
              GEN,       --  verb taking the GENitive
              DAT,       --  verb taking the DATive
              ABL,       --  verb taking the ABLative
              TRANS,     --  TRANSitive verb
              INTRANS,   --  INTRANSitive verb
              IMPERS,    --  IMPERSonal verb (implied subject 'it', 'they', 'God')
                         --  agent implied in action, subject in predicate
              DEP,       --  DEPonent verb
                         --  only passive form but with active meaning
              SEMIDEP,   --  SEMIDEPonent verb (forms perfect as deponent)
                         --  (perfect passive has active force)
              PERFDEF    --  PERFect DEFinite verb
                         --  having only perfect stem, but with present force

The KIND_TYPEs represent various aspects of a word which may be useful to some program, not necessarily the present one. They were put in for various reasons, and later versions may change the selection and use. Some of the KIND flags are never used. In some cases more than one KIND flag might be appropriate, but only one is selected. Some seemed to be a good idea at one time, but have not since proved out. The lists above are just for completeness.

NOUN KIND is used in trimming (when set) the output and removing possibly spurious cases (locative for a person, but preserving the vocative).

VERB KIND allows examples (when set) to give a more reasonable meaning. A DEP flag allows the example to reflect active meaning for passive form. It also allows the dictionary form to be constructed properly from stems. TRANS/INTRANS were included to allow a further program a hint as to what kind of object it should expect. This flag is only now being fixed during the update. There are some verbs which, although mostly used in one way, might be either. These are assigned X rather than breaking into two entries. This would be of no particular use at this point since it would not allow the object to be determined. GEN/DAT/ABL flags have related function, but are almost absent. TO_BE is used to indicate that a form of esse may be part of a compound verb tense with a participle. TO_BEING indicates a verb related to esse (e.g., abesse) which has no object, neither is in used to form compounds. IMPERS is used to weed out person and forms inappropriate to an impersonal verb, and to insert a special meaning distinct from a general form associated with the same verb stem.

There is a problem in that all values for this parameter are not orthogonal. DEP is a different sort of thing from INTRANS. There ought to be a KIND_1 and KIND_2 to separate the different classes. However, this would be overkill considering the use made of this parameter, so far.

There is a more difficult DEP problem. 'Good Latin' requires that the DEP be recognized and processed to eliminate active forms. In some cases there are dictionary examples, mostly medieval, of the depondency being violated. Some of those cases have been recognized with a separate entry. This is not something that a suffix can handle appropriately, even if mechanically it can function. A better way might be to include the perfect form but still have the DEP flag, thereby allow the trimming in most cases. This has not been done yet. But an active form would be recognized if input, especially if the text is medieval.

NUMERAL KIND and VALUE are used by the program in constructing the meaning line.

#### Help for Parameters

One can CHANGE_PARAMETERS by inputting a '#' [number sign] character (ASCII 35) as the input word, followed by a return. (Note that this has changed from early versions in which '?' was used.) Each parameter is listed and the user is offered the opportunity to change it from the current value by answering Y or N (any case). For each parameter there is some explanation or help. This is displayed by in putting a '?' [question mark], followed by a return. HINT: While going down the list if one has made all the changes desired, one need not continue to the end. Just enter a space and then give a return. The program will interpret this as an illegal entry (not Y or N) and will cancel the rest of the list, while retaining any changes made to that point.

Some parameters may not function in the English mode, nor is the documentation necessarily complete,

The various help displays are listed here:

    TRIM_OUTPUT_HELP
       This option instructs the program to remove from the output list of
       possible constructs those which are least likely.  There is now a fair
       amount of trimming, killing LOC and VOC plus removing Uncommon and
       non-classical (Archaic/Medieval) when more common results are found
       and this action is requested (turn it off in MDV (!) parameters).
       When a TRIM has been done, the output is followed by an asterix (*).
       There certainly is no absolute assurence that the items removed are
       not correct, just that they are statistically less likely.
       Note that poets are likely to employ unusual words and inflections for
       various reasons.  These may be trimmed out if this parameter in on.
       When in English mode, trim just reduces the output to the top six
       results, if there are that many.  Asterix means there are more
                                                       The default is Y(es)

    HAVE_OUTPUT_FILE_HELP
       This option instructs the program to create a file which can hold the
       output for later study, otherwise the results are just displayed on
       the screen.  The output file is named  WORD.OUT
       This means that one run will necessarily overwrite a previous run,
       unless the previous results are renamed or copied to a file of another
       name.  This is available if the METHOD is INTERACTIVE, no parameters.
       The default is N(o), since this prevents the program from overwriting
       previous work unintentionally.  Y(es) creates the output file.

    WRITE_OUTPUT_TO_FILE_HELP
       This option instructs the program, when HAVE_OUTPUT_FILE is on, to
       write results to the WORD.OUT file.
       This option may be turned on and off during running of the program,
       thereby capturing only certain desired results.  If the option
       HAVE_OUTPUT_FILE is off, the user will not be given a chance to turn
       this one on.  Only for INTERACTIVE running.         Default is N(o).
       This works in English mode, but output in somewhat diffeent so far.

    DO_UNKNOWNS_ONLY_HELP
       This option instructs the program to only output those words that it
       cannot resolve.  Of course, it has to do processing on all words, but
       those that are found (with prefix/suffix, if that option in on) will
       be ignored.  The purpose of this option is t allow a quick look to
       determine if the dictionary and process is going to do an acceptable
       job on the current text.  It also allows the user to assemble a list
       of unknown words to look up manually, and perhaps augment the system
       dictionary.  For those purposes, the system is usually run with the
       MINIMIZE_OUTPUT option, just producing a list.  Another use is to run
       without MINIMIZE to an output file.  This gives a list of the input
       text with the unknown words, by line.  This functions as a spelling
       checker for Latin texts.  The default is N(o).
       This does not work in English mode, but may in the future.

    WRITE_UNKNOWNS_TO_FILE_HELP
       This option instructs the program to write all unresolved words to a
       UNKNOWNS file named  WORD.UNK
       With this option on , the file of unknowns is written, even though
       the main output contains both known and unknown (unresolved) words.
       One may wish to save the unknowns for later analysis, testing, or to
       form the basis for dictionary additions.  When this option is turned
       on, the UNKNOWNS file is written, destroying any file from a previous
       run.  However, the write may be turned on and off during a single run
       without destroying the information written in that run.
       This option is for specialized use, so its default is N(o).
       This does not work in English mode, but may in the future.

    IGNORE_UNKNOWN_NAMES_HELP
       This option instructs the program to assume that any capitalized word
       longer than three letters is a proper name.  As no dictionary can be
       expected to account for many proper names, many such occur that would
       be called UNKNOWN.  This contaminates the output in most cases, and
       it is often convenient to ignore these sperious UNKNOWN hits.  This
       option implements that mode, and calls such words proper names.
       Any proper names that are in the dictionary are handled in the normal
       manner.                                The default is Y(es).

    IGNORE_UNKNOWN_CAPS_HELP
       This option instructs the program to assume that any all caps word
       is a proper name or similar designation.  This convention is often
       used to designate speakers in a discussion or play.  No dictionary can
       claim to be exaustive on proper names, so many such occur that would
       be called UNKNOWN.  This contaminates the output in most cases, and
       it is often convenient to ignore these sperious UNKNOWN hits.  This
       option implements that mode, and calls such words names.  Any similar
       designations that are in the dictionary are handled in the normal
       manner, as are normal words in all caps.    The default is Y(es).

    DO_COMPOUNDS_HELP
       This option instructs the program to look ahead for the verb TO_BE (or
       iri) when it finds a verb participle, with the expectation of finding
       a compound perfect tense or periphastic.  This option can also be a
       trimming of the output, in that VPAR that do not fit (not NOM) will be
       excluded, possible interpretations are lost.  Default choice is Y(es).
       This processing is turned off with the choice of N(o).

    DO_FIXES_HELP
       This option instructs the program, when it is unable to find a proper
       match in the dictionary, to attach various prefixes and suffixes and
       try again.  This effort is successful in about a quarter of the cases
       which would otherwise give UNKNOWN results, or so it seems in limited
       tests.  For those cases in which a result is produced, about half give
       easily interpreted output; many of the rest are etymologically true,
       but not necessarily obvious; about a tenth give entirely spurious
       derivations.  The user must proceed with caution.
       The default choice is Y(es), since the results are generally useful.
       This processing can be turned off with the choice of N(o).

    DO_TRICKS_HELP
       This option instructs the program, when it is unable to find a proper
       match in the dictionary, and after various prefixes and suffixes, to
       try every dirty Latin trick it can think of, mainly common letter
       replacements like cl -> cul, vul -> vol, ads -> ass, inp -> imp, etc.
       Together these tricks are useful, but may give false positives (>10%).
       They provide for recognized varients in classical spelling.  Most of
       the texts with which this program will be used have been well edited
       and standardized in spelling.  Now, moreover,  the dictionary is being
       populated to such a state that the hit rate on tricks has fallen to a
       low level.  It is very seldom productive, and it is always expensive.
       The only excuse for keeping it as default is that now the dictionary
       is quite extensive and misses are rare.         Default is now Y(es). ) ;

    DO_DICTIONARY_FORMS_HELP
       This option instructs the program to output a line with the forms
       normally associated with a dictionary entry (NOM and GEN of a noun,
       the four principal parts of a verb, M-F-N NOM of an adjective, ...).
       This occurs when there is other output (i.e., not with UNKNOWNS_ONLY).
       The default choice is N(o), but it can be turned on with a Y(es).

    SHOW_AGE_HELP
       This option causes a flag, like '<Late>' to appear for inflection or
       form in the output.  The AGE indicates when this word/inflection was
       in use, at least from indications is dictionary citations.  It is
       just an indication, not controlling, useful when there are choices.
       No indication means that it is common throughout all periods.
       The default choice is Y(es), but it can be turned off with a N(o).

    SHOW_FREQUENCY_HELP
       This option causes a flag, like '<rare>' to appear for inflection or
       form in the output.  The FREQ is indicates the relative usage of the
       word or inflection, from indications is dictionary citations.  It is
       just an indication, not controlling, useful when there are choices.
       No indication means that it is common throughout all periods.
       The default choice is Y(es), but it can be turned off with a N(o).

    DO_EXAMPLES_HELP
       This option instructs the program to provide examples of usage of the
       cases/tenses/etc. that were constructed.  The default choice is N(o).
       This produces lengthly output and is turned on with the choice Y(es).

    DO_ONLY_MEANINGS_HELP
       This option instructs the program to only output the MEANING for a
       word, and omit the inflection details.  This is primarily used in
       analyzing new dictionary material, comparing with the existing.
       However it may be of use for the translator who knows most all of
       the words and just needs a little reminder for a few.
       The default choice is N(o), but it can be turned on with a Y(es).

    DO_STEMS_FOR_UNKNOWN_HELP
       This option instructs the program, when it is unable to find a proper
       match in the dictionary, and after various prefixes and suffixes, to
       list the dictionary entries around the unknown.  This will likely
       catch a substantive for which only the ADJ stem appears in dictionary,
       an ADJ for which there is only a N stem, etc.  This option should
       probably only be used with individual UNKNOWN words, and off-line
       from full translations, therefore the default choice is N(o).
       This processing can be turned on with the choice of Y(es).

    SAVE_PARAMETERS_HELP
       This option instructs the program, to save the current parameters, as
       just established by the user, in a file WORD.MOD.  If such a file
       exists, the program will load those parameters at the start.  If no
       such file can be found in the current subdirectory, the program will
       start with a default set of parameters.  Since this parameter file is
       human-readable ASCII, it may also be created with a text editor.  If
       the file found has been improperly created, is in the wrong format, or
       otherwise uninterpretable by the program, it will be ignored and the
       default parameters used, until a proper parameter file in written by
       the program.  Since one may want to make temporary changes during a
       run, but revert to the usual set, the default is N(o).

There is also a set of DEVELOPER_PARAMETERS that are unlikely to be of interest to the normal user. Some of these facilities may be disconnected or not work for other reasons. Additional parameters may be included without notice or documentation. The HELP may be the most reliable source of information. These parameters are mostly for the use in the development process. These may be changed or examined by in similar change procedure by inputting a '!' [exclamation sign] character, followed by a return.

    HAVE_STATISTICS_FILE_HELP
       This option instructs the program to create a file which can hold
       certain statistical information about the process.  The file is
       overwritten for new invocation of the program, so old data must be
       explicitly saved if it is to be retained.  The statistics are in TEXT
       format.     The statistics file is named  WORD.STA
       This information is only of development use, so the default is N(o).

    WRITE_STATISTICS_FILE_HELP
       This option instructs the program, with HAVE_STATISTICS_FILE, to put
       derived statistics in a file named  WORD.STA
       This option may be turned on and off while running of the program,
       thereby capturing only certain desired results.  The file is reset at
       each invocation of the program, if the HAVE_STATISTICS_FILE is set.
       If the option HAVE_STATISTICS_FILE is off, the user will not be given
       a chance to turn this one on.                Default is N(o).

    SHOW_DICTIONARY_HELP
       This option causes a flag, like 'GEN>' to be put before the meaning
       in the output.  While this is useful for certain development purposes,
       it forces off a few characters from the meaning, and is really of no
       interest to most users.
       The default choice is N(o), but it can be turned on with a Y(es).

    SHOW_DICTIONARY_LINE_HELP
       This option causes the number of the dictionary line for the current
       meaning to be output.  This is of use to no one but the dictionary
       maintainer.  The default choice is N(o).  It is activated by Y(es).

    SHOW_DICTIONARY_CODES_HELP
       This option causes the codes for the dictionary entry for the current
       meaning to be output.  This may not be useful to any but the most
       involved user.  The default choice is N(o).  It is activated by Y(es).

    DO_PEARSE_CODES_HELP
       This option causes special codes to be output flagging the different
       kinds of output lines.  01 for forms, 02 for dictionary forms, and
       03 for meaning. The default choice is N(o).  It is activated by Y(es).
      There are no Pearse codes in English mode.

    DO_ONLY_INITIAL_WORD_HELP
       This option instructs the program to only analyze the initial word on
       each line submitted.  This is a tool for checking and integrating new
       dictionary input, and will be of no interest to the general user.
       The default choice is N(o), but it can be turned on with a Y(es).

    FOR_WORD_LIST_CHECK_HELP
       This option works in conjunction with DO_ONLY_INITIAL_WORD to allow
       the processing of scanned dictionarys or text word lists.  It accepts
       only the forms common in dictionary entries, like NOM S for N or ADJ,
       or PRES ACTIVE IND 1 S for V.  It is be used only with DO_INITIAL_WORD
       The default choice is N(o), but it can be turned on with a Y(es).

    DO_ONLY_FIXES_HELP
       This option instructs the program to ignore the normal dictionary
       search and to go direct to attach various prefixes and suffixes before
       processing. This is a pure research tool.  It allows one to examine
       the coverage of pure stems and dictionary primary compositions.
       This option is only available if DO_FIXES is turned on.
       This is entirely a development and research tool, not to be used in
       conventional translation situations, so the default choice is N(o).
       This processing can be turned on with the choice of Y(es).

    DO_FIXES_ANYWAY_HELP
       This option instructs the program to do both the normal dictionary
       search and then process for the various prefixes and suffixes too.
       This is a pure research tool allowing one to consider the possibility
       of strange constructions, even in the presence of conventional
       results, e.g., alte => deeply (ADV), but al+t+e => wing+ed (ADJ VOC)
       (If multiple suffixes were supported this could also be wing+ed+ly.)
       This option is only available if DO_FIXES is turned on.
       This is entirely a development and research tool, not to be used in
       conventional translation situations, so the default choice is N(o).
       This processing can be turned on with the choice of Y(es).
             ------    PRESENTLY NOT IMPLEMENTED    ------

    USE_PREFIXES_HELP
       This option instructs the program to implement prefixes from ADDONS
       whenever and wherever FIXES are called for.  The purpose of this
       option is to allow some flexibility while the program in running to
       select various combinations of fixes, to turn them on and off,
       individually as well as collectively.  This is an option usually
       employed by the developer while experimenting with the ADDONS file.
       This option is only effective in connection with DO_FIXES.
       This is primarily a development tool, so the conventional user should
       probably maintain the default  choice of Y(es).

    USE_SUFFIXES_HELP
       This option instructs the program to implement suffixes from ADDONS
       whenever and wherever FIXES are called for.  The purpose of this
       option is to allow some flexibility while the program in running to
       select various combinations of fixes, to turn them on and off,
       individually as well as collectively.  This is an option usually
       employed by the developer while experimenting with the ADDONS file.
       This option is only effective in connection with DO_FIXES.
       This is primarily a development tool, so the conventional user should
       probably maintain the default  choice of Y(es).

    USE_TACKONS_HELP
       This option instructs the program to implement TACKONS from ADDONS
       whenever and wherever FIXES are called for.  The purpose of this
       option is to allow some flexibility while the program in running to
       select various combinations of fixes, to turn them on and off,
       individually as well as collectively.  This is an option usually
       employed by the developer while experimenting with the ADDONS file.
       This option is only effective in connection with DO_FIXES.
       This is primarily a development tool, so the conventional user should
       probably maintain the default  choice of Y(es).

    DO_MEDIEVAL_TRICKS_HELP
       This option instructs the program, when it is unable to find a proper
       match in the dictionary, and after various prefixes and suffixes, and
       tring every Classical Latin trick it can think of, to go to a few that
       are usually only found in medieval Latin, replacements of caul -> col,
       st -> est, z -> di, ix -> is, nct -> nt.  It also tries some things
       like replacing doubled consonants in classical with a single one.
       Together these tricks are useful, but may give false positives (>20%).
       This option is only available if the general DO_TRICKS is chosen.
       If the text is late or medieval, this option is much more useful than
       tricks for classical.  The dictionary can never contain all spelling
       variations found in medieval Latin, but some constructs are common.
       The default choice is N(o), since the results are iffy, medieval only,
       and expensive.  This processing is turned on with the choice of Y(es).

    DO_SYNCOPE_HELP
       This option instructs the program to postulate that syncope of
       perfect stem verbs may have occured (e.g, aver -> ar in the perfect),
       and to try various possibilities for the insertion of a removed 'v'.
       To do this it has to fully process the modified candidates, which can
       have a consderable impact on the speed of processind a large file.
       However, this trick seldom producesa false positive, and syncope is
       very common in Latin (first year texts excepted).  Default is Y(es).
       This processing is turned off with the choice of N(o).

    DO_TWO_WORDS_HELP
       There are some few common Lain expressions that combine two inflected
       words (e.g. respublica, paterfamilias).  There are numerous examples
       of numbers composed of two words combined together.
       Sometimes a text or inscription will have words run together.
       When WORDS is unable to reach a satisfactory solution with all other
       tricks, as a last stab it will try to break the input into two words.
       This most often fails.  Even if mechnically successful, the result is
       usually false and must be examined by the user.  If the result is
       correct, it is probably clear to the user.  Otherwise,  beware.
       This problem will not occur for a well edited text, such as one will
       find on your Latin exam, but sometimes with raw text.
       Since this is a last chanceand infrequent, the default is Y(es);
       This processing is turned off with the choice of N(o).

    INCLUDE_UNKNOWN_CONTEXT_HELP
       This option instructs the program, when writing to an UNKNOWNS file,
       to put out the whole context of the UNKNOWN (the whole input line on
       which the UNKNOWN was found).  This is appropriate for processing
       large text files in which it is expected that there will be relatively
       few UNKNOWNS.    The main use at the moment is to provide display
       of the input line on the output file in the case of UNKNOWNS_ONLY.

    NO_MEANINGS_HELP
       This option instructs the program to omit putting out meanings.
       This is only useful for certain dictionary maintenance procedures.
       The combination not DO_DICTIONARY_FORMS, MEANINGS_ONLY, NO_MEANINGS
       results in no visible output, except spacing lines.    Default is N)o.

    OMIT_ARCHAIC_HELP
       THIS OPTION IS CAN ONLY BE ACTIVE IF WORDS_MODE(TRIM_OUTPUT) IS SET!
       This option instructs the program to omit inflections and dictionary
       entries with an AGE code of A (Archaic).  Archaic results are rarely
       of interest in general use.  If there is no other possible form, then
       the Archaic (roughly defined) will be reported.  The default is Y(es).

    OMIT_MEDIEVAL_HELP
       THIS OPTION IS CAN ONLY BE ACTIVE IF WORDS_MODE(TRIM_OUTPUT) IS SET!
       This option instructs the program to omit inflections and dictionary
       entries with AGE codes of E or later, those not in use in Roman times.
       While later forms and words are a significant application, most users
       will not want them.  If there is no other possible form, then the
       Medieval (roughly defined) will be reported.   The default is Y(es).

    OMIT_UNCOMMON_HELP
       THIS OPTION IS CAN ONLY BE ACTIVE IF WORDS_MODE(TRIM_OUTPUT) IS SET!
       This option instructs the program to omit inflections and dictionary
       entries with FREQ codes indicating that the selection is uncommon.
       While these forms area significant feature of the program, many users
       will not want them.  If there is no other possible form, then the
       uncommon (roughly defined) will be reported.   The default is Y(es).

    DO_I_FOR_J_HELP
       This option instructs the program to modify the output so that the j/J
       is represented as i/I.  The consonant i was writen as j in cursive in
       Imperial times and called i longa, and often rendered as j in medieval
       times.  The capital is usually rendered as I, as in inscriptions.
       If this is NO/FALSE, the output will have the same character as input.
       The program default, and the dictionary convention is to retain the j.
       Reset if this ia unsuitable for your application. The default is N(o).

    DO_U_FOR_V_HELP
       This option instructs the program to modify the output so that the u
       is represented as v.  The consonant u was writen sometimes as uu.
       The pronounciation was as current w, and important for poetic meter.
       With the printing press came the practice of distinguishing consonant
       u with the character v, and was common for centuries.  The practice of
       using only u has been adopted in some 20th century publications (OLD),
        but it is confusing to many modern readers.  The capital is commonly
       V in any case, as it was and is in inscriptions (easier to chisel).
       If this is NO/FALSE, the output will have the same character as input.
       The program default, and the dictionary convention is to retain the v.
       Reset If this ia unsuitable for your application. The default is N(o).

    PAUSE_IN_SCREEN_OUTPUT_HELP
       This option instructs the program to pause in output on the screen
       after about 16 lines so that the user can read the output, otherwise
       it would just scroll off the top.  A RETURN/ENTER gives another page.
       If the program is waiting for a return, it cannot take other input.
       This option is active only for keyboard entry or command line input,
       and only when there is no output file.  It is moot if only single word
       input or brief output.                 The default is Y(es).

    NO_SCREEN_ACTIVITY_HELP
       This option instructs the program not to keep a running screen of the
       input.  This is probably only to be used by the developer to calibrate
       run times for large text file input, removing the time necessary to
       write to screen.                       The default is N(o).

    UPDATE_LOCAL_DICTIONARY_HELP
       This option instructs the program to invite the user to input a new
       word to the local dictionary on the fly.  This is only active if the
       program is not using an (@) input file!  If an UNKNOWN is discovered,
       the program asks for STEM, PART, and MEAN, the basic elements of a
       dictionary entry.  These are put into the local dictionary right then,
       and are available for the rest of the session, and all later sessions.
       The use of this option requires a detailed knowledge of the structure
       of dictionary entries, and is not for the average user.  If the entry
       is not valid, reloading the dictionary will raise and exception, and
       the invalid entry will be rejected, but the program will continue
       without that word.  Any invalid entries can be corrected or deleted
       off-line with a text editor on the local dictionary file.  If one does
       not want to enter a word when this option is on, a simple RETURN at
       the STEM=> prompt will ignore and continue the program.  This option
       is only for very experienced users and should normally be off.
                                                 The default is N(o).
             ------    NOT AVAILABLE IN THIS VERSION   -------

    UPDATE_MEANINGS_HELP
       This option instructs the program to invite the user to modify the
       meaning displayed on a word translation.  This is only active if the
       program is not using an (@) input file!  These changes are put into
       the dictionary right then and permenently, and are available from
       then on, in this session, and all later sessions.   Unfortunately,
       these changes will not survive the replacement of the dictionary by a
       new version from the developer.  Changes can only be recovered by
       considerable prcessing by the deneloper, and should be left there.
       This option is only for experienced users and should remain off.
                                                 The default is N(o).
             ------    NOT AVAILABLE IN THIS VERSION   -------

    MINIMIZE_OUTPUT_HELP
       This option instructs the program to minimize the output.  This is a
       somewhat flexible term, but the use of this option will probably lead
       to less output.                        The default is Y(es).

    SAVE_PARAMETERS_HELP
       This option instructs the program, to save the current parameters, as
       just established by the user, in a file WORD.MDV.  If such a file
       exists, the program will load those parameters at the start.  If no
       such file can be found in the current subdirectory, the program will
       start with a default set of parameters.  Since this parameter file is
       human-readable ASCII, it may also be created with a text editor.  If
       the file found has been improperly created, is in the wrong format, or
       otherwise uninterpretable by the program, it will be ignored and the
       default parameters used, until a proper parameter file in written by
       the program.  Since one may want to make temporary changes during a
       run, but revert to the usual set, the default is N(o).

#### Special Cases

Some adjectives have no conventional positive forms (either missing or undeclined), or the POS forms have more than one COMP/SUPER. In these few cases, the individual COMP or SUPER form is entered separately. Since it is not directly connected with a POS form, and only the POS forms have different numbered declensions, the special form is given a declension of (0, 0). An additional consequence is that the dictionary form in output is only for the COMP/SUPER, and does not reflect all comparisons.

#### Uniques

There are some irregular situations which are not convenient to handle through the general algorithms. For these a UNIQUES file and procedure was established. The number of these special cases is less than one hundred, but may increase as new situations arise, and decrease as algorithms provide better coverage. The user will not see much difference, except in that no dictionary forms are available for these unique words.

#### Tricks

There are a number of situations in Latin writing where certain modifications or conventions regularly are found. While often found, these are not the normal classical forms. If a conventional match is not found, the program may be instructed to TRY_TRICKS. Below is a partial list of current tricks. The syncopated form of the perfect often drops the 'v' and loses the vowel. An initial 'a' followed by a double letter often is used for an 'ad' prefix, likewise an initial 'ad' prefix is often replaced by an 'a' followed by a double letter. An initial 'i' followed by a double letter often is used for an 'in' prefix, likewise an initial 'in' prefix is often replaced by an 'i' followed by a double letter. A leading 'inp' could be an 'imp'. A leading 'obt' could be an 'opt'. An initial 'har...' or 'hal...' may be rendered by an 'ar' or 'al', likewise the dictionary entry may have 'ar'/'al' and the trial word begin with 'ha...'. An initial 'c' could be a 'k', or the dictionary entry uses 'c' for 'k'. A nonterminal 'ae' is often rendered by an 'e'. An initial 'E' can replace an 'Ae'. An 'iis...' beginning some forms of 'eo' may be contracted to 'is...'. A nonterminal 'ii' is often replaced by just 'i'; including 'ji', since in this program and dictionary all 'j' are made 'i'. A 'cl' could be a 'cul'. A 'vul' could be a 'vol'. and many others, including a procedure to try to break the input word into two.

Various manipulations of 'u' and 'v' are possible: 'v' could be replaced by 'u', like the new Oxford Latin Dictionary, leading 'U' could be replaced by 'V', checking capitalization, all 'U's could have been replaced by 'V', like stone cutting. Previous versions had various kludges attempting to calculate the correct interpretation. They were surprisingly good, but philosophically baseless and certainly failed in a number of cases. The present version simply considers 'u' and 'v' as the same letter in parsing the word. However, the dictionary entries make the distinction and this is reflected in the output.

Various combinations of these tricks are attempted, and each try that results in a possible hit is run against the full dictionary, which can make these efforts time consuming. That is a good reason to make the dictionary as large as possible, rather than counting on a smaller number of roots and doing the maximum word formation.

Finally, while the program could succeed on a word that requires two or three of these tricks to work in combination, there are limits. Some words for which all the modifications are supported will fail, if there are just too many. In fact, it is probably better that that be the case, otherwise one will generate too many false positives. Testing so far does not seem to show excessive zeal on the part of the program, but the user should examine the results, especially when several tricks are involved.

There is a basic conflict here. At the state of the 1.97E dictionary there are so few words that both fail the main program and are caught by tricks that this option could be defaulted to No. However, one could argue that there will be very few occasions for trying TRICKS, so that the cost is minimal. Unfortunately the degree of completeness of the dictionary for classical latin does not carry over to medieval Latin. With the hope that the program will become more useful in that area, the default has been set to Yes, reflecting the philosophy early in the development for classical Latin.

#### Trimming of uncommon results

Trimming has an impact on output. If TRIM_OUTPUT parameter is set, and specific parameters set in the MDEV, the program will deprecate those possible forms which come from archaic or medieval (non-classical) stems or inflections, also stems or inflections which are relatively uncommon. It will report such if no classical/common solutions are found. The default is set for this, expecting that most users are students and unlikely to encounter rare forms. Other users can set the parameters appropriately for their situation.

This capability is preliminary. It is just becoming useful in that the factors are set for about half the dictionary entries. There are still a large number of entries and inflections that are not set and will continue to be reported until determination of rarity is made.

###
GUIDING PHILOSOPHY

#### Purpose

The dictionary is intended as a help to someone who knows roughly enough Latin for the document under study. It gives the accidence and meanings possible for an input Latin word. It is for someone reading Latin text.

This is a translation dictionary. Mostly it provides individual words in English that correspond to, and might be used in a translation of, words in Latin text. The program assumes a fair command of English. This is in contrast to a conventional same-language desktop dictionary which would explain the meanings of words in the same language. The distinction may be obvious but it is important. A Latin dictionary in medieval times would have explanations in Latin of Latin words.

There are various approaches to the preparation of a dictionary. The most scholarly might be to select only proper and correct entries, only correct derivations, grammar, and spelling. This would be a dictionary for one who wished to write 'correct' Latin. (Correct being defined as the way Cicero, or your favorite writer or grammarian, used it.) The current project has a different goal. This program is successful if a word found in text is given an appropriate meaning, whether or not that word is spelled in the generally approved way, or is 'good Latin'. Thus the program includes various words and forms that may have been rejected by recent scholars, but still appear in some texts. Philosophically, thus program deals with Latin as it was, not as it should have been. I make no corrections to Cicero, which some might have been tempted to do if producing an academic dictionary instead of a program. Moreover I make no corrections of St Jerome. If your copy of the Vulgate has a particular spelling, that may be recognized by the program, either through a TRICK or as a dictionary entry that I have generated.

A philosophical difference from many dictionary projects is that this one has no firm model of the user or application. It is not limited to classical Latin, or to 'good practice', or to common words, or to words appearing in certain texts. As a result there will be a lot of chaff in the output. Some of this may be trimmed out automatically if desired, but it is there and available.

However inadequately, I hope to document decisions that went into the arrangement of the program and dictionary. I am surprised that there is little or no such information to the user of published dictionaries. If others generate similar products, or use the data from this one, they can do so in knowledge of how and why processes and forms were constructed.

I make few value judgments and those are mechanical, not scholarly, and are documented herein. Nevertheless some may be inappropriate, in spite of good intentions.

#### Method

The program subtracts possible endings from an input words and searches a list of stems, trying to make a match. If no exact match is possible, it tries various modifications, beginning with prefixes and suffixes, and eventually involving various regular spelling variations (or 'tricks') common in classical and medieval Latin.

A choice was made that the base was classical Latin as defined by the Oxford Latin Dictionary (OLD). Their primary time period is arbitrary/roughly 100 BC to 100 AD.

The classical form of words is taken as the base. Modifications are in such a way to correct to this base. Further additions to local dictionaries should keep this in mind. Modifications are made to the input words, not to the dictionary stems. It could be done the other way, but the present situation was initially much easier. There are some consequences of this approach. For instance, it is easy to remove an 'h' from an input word to match with a stem. It is much more difficult (but not impossible) to add 'h' in all possible positions to check against stems.

It would be possible to match most words with a relatively smaller list of stems (or roots) and generous application of word construction. This approach is not followed. One difficulty is that while words may be constructed correctly, and the underlying meaning to be found from this construction, the common usage may be obscured by a formal interpretation of the parts. In practice this occurs in 20-40% of the cases. This method is still very useful in approaching a word for which there has been no dictionary interpretation, but it puts a considerable burden on the normal user. Further, in about 10% of constructions, the result is just wrong.

In normal usage, if the program finds a simple match, it does not go further and consider what constructed words might also be valid. (One can override and force prefix/suffix construction with a switch, but one might not want to force all possible tricks.)

For instance, if there is an adjective that matches, a corresponding identically spelled, logically valid noun will not be reported unless it is explicitly found in the dictionary, even though it could be constructed or inferred from the adjective or constructed with a suffix from a verb in the dictionary.

An exception to this is that enclitics (eg., -que) are always considered. Coloque can be a verb or collo-que. The latter is in Virgil and should not be omitted. Verb syncope is also favored. In the vast majority of cases, if there is a possible syncope it is the correct parse. This is given preference over word construction with suffix. Audii is syncope of audivi, but it could also be aud-i-i. The latter is considered very unlikely.

There are a large number of paths and possibilities. Choices have been made in the code that result in the exclusion of some. It is hoped that they were the best choices. The method was constructed by taking a number of primary procedures and combining/assembling them in such a way as to give reasonable parses for a number of test cases. Basicly, this is hacking, but it might be considered and emperical starting point from which one could construct a logical rationale.

Therefore, the philosophy is to populate the stem list as densely as possible. Even easily resolved differences are included redundantly (adligo as well as alligo - ad- is most of duplicates). The advantage is that while regular single-letter modifications are fairly easy, and two letter differences are possible (but more expensive), further deviations are problematical. The better populated the stem list, the better the chance of a result.

Even in easy cases the overpopulation is helpful. Antebasis is easily parsed as ante-basis ('pedestal before', which is reasonable), but inclusion as a separate word allows the additional information that it is the hindmost pillar of the pedestal of a ballista.

The stem list is also populated with variants suggested by different sources. The problem is that the remains of classical Latin have gone through many monks along the way. These copyists may have made simple mistakes (typos!), or have made what they thought were proper corrections (spell checkers!). And twenty centuries later scholars work hard to reassemble the best Latin to present in the dictionary. But a particular document in the form presented to the reader may have have a variety of spellings for exactly the same word in the same referenced passage (Pliny's Natural History is often subject to this problem). (It may even be that modern texts and dictionaries have misprints!) All forms found in various dictionaries can be included, with the exception of those explicitly labeled 'misread' (and the argument probably could mandate their inclusion also). However, a single example of a variant in one case will not be included as a dictionary entry. If such a word is sufficiently important, if it is used frequently or by several authors, it will be entered as a UNIQUE.

Lewis and Short seem to be more willing than the more recent Oxford Latin Dictionary to raise a few examples of variation to an entry (at least an alternate). Generally, I make an entry if some dictionary does so. But within an entry I generate additional possible stems not noted elsewhere, e.g., I expand first declension verbs with '-av' perfect stems, even though no example exists in classical Latin. This is often the practice in other dictionaries also.

Verb parts omitted from source dictionaries are mechanically added where it is clear, (ex. where the base verb is documented, but parts are omitted in compounds). Whether Cicero used them or not, some later text might.

In some cases I also have expanded adjectives and adverbs to include comparative and superlative stems where they seem reasonable or have corresponding English instances, even when there is no specific dictionary citation. This effort was modivated primarily by finding examples of such comparisons in processing of large amounts of text beyond the classical works upon which authoritative dictionaries are based, but even classical works yielded examples. The point is that, while these forms would usually be caught by the word formation (prefix/suffix) process in the program, the process is limited to how many operations can be done serially. Having more/expended stems allows another level of word modification to be implemented.

Adjectives are extrapolated to COMP and SUPER where it makes sense (when those meanings are reasonable, and in many cases they are not) even if the source dictionary only lists POS. They are expanded fully especially even when the source lists a COMP but no SUPER.

Perhaps a bit out of context, consider the common question of SECLORUM in the Great Seal of the USA. This pure word in not in any dictionary I know of, not the OLS or L+S. A simple trick gives seculorum (seculum = world), but the favored translation is from the twice modified saeculorum (saeculum = age), which would not be found by a minimalistic system.

It is often the practice in paper dictionaries to double up on an entry that may be either adjective or noun, usually by leading with the adjective and mentioning its use as a noun. A much larger set of adjective/noun pairs is favored with separate entries. It is the philosophy of this program to make separate entries whenever there is an example in any reference dictionary. This might faciliate the task of a larger translation program which would handle phrases or sentences. However there has been no effort to explicitly generate such pair expansion if there is no precedent, and the user must still recognize the possibility of unexpanded multiple possibilities for substantives.

An argument against a large stem list is that it increases the storage required (but this is extremely modest by current standards) and increases processing time for search of the stems (this is far offset by the processing which would be required to construct or analyze words working from a smaller stem list).

A significant objection is that artifically generated stems may conflict with real/common ones and produce false output confusing to the user. A certain amount of this is eliminated by trimming the output to emphisize the most probable results, but it is still a problem.

Perhaps a counterexample would be an inferred fourth stem to no/nare (swim). Natus conflicts with the fourth stem of nascor (be produced/born) and the nouns and adjectives stemming from it. The nare natus does not appear in dictionaries, nor does it occur in compounds of nare, so it has been omitted from the WORDS dictionary.

Additional parts of verbs are included (first conjugation is easily filled out, even eccentric verbs if they are compounds of known parts), although they may not have been found in any well known texts. Cases can be logically constructed that are 'missing' in classical Latin. Verbs with prefix can be expanded when the base is known. That a form has not been found in surviving copies of classical texts does not mean that it was not on the lips of every centurion and his girl friend, or that it might not find its way into medieval texts.

It may be argued in some cases that forms are missing because their pronounciation would be awkward. This may well be true when Cicero is the arbiter, but others may not be so elegant. Moreover, much of the texts are represented by medieval documents, Latin the was written but may not have been spoken, so the problem did not arise. However, I might be willing to accept this argument for considering carefully some perfect stems of first conjugation verbs which otherwise would end in -avav. In the end, the only one I found that I could not support was lavo (wash), and its compounds, for which the perfect is lavi.

In some cases there are good reasons not to do the mathematical expansion, and these are pointedly avoided. There is no mechanical generation of, for instance, conl- words for every coll- word, unless there is some citation or reasonable rationale. They may be paired in almost every case, but, for instance, collis and collyra are not. However, forms that are mentioned in dictionaries explicitly, or implicitly by being derived from words having variant forms, are included in order to reduce the dependence on 'tricks'. OLD has a conp- for almost every comp- (except derivatives from como). Rare exceptions seem to be rare words for which few examples (or only one) exist. Even in some of these cases, OLD (mechanically?) gives two forms. L+S follows the same pattern, except for words of late Latin (which would not be found in OLD). It is presumed that the general practice in later times was always to use comp-, and the program dictionary follows that. There are many acc-/adc- pairs, but OLD has a fair number of acc- words without mention of a corresponding adc-, and so the possible generation of these words has been resisted. If an example turns up in text, the appropriate trick procedure should suffice

One suspects that some amount of analytical expansion is present even in the best dictionaries. Otherwise how can one explain four alternate spellings for a word which apparently only appears in citation as a single inscription.

In a some few cases I have infered a declension to certain very obscure Greek words which other dictionaries have treated as indeclinable (having only a single classical example of its use). My argument is that some later writer, using this word, might attempt to decline in it in a conventional manner, no matter what Vitruvius thought. I have indicated the indecl. option in the meaning.

Adjectives from participles are included if an entry is found in some reference dictionary. In some case the adjective has a special meaning not obvious from the verb. The program will return both the adjective and the participle with its verb meaning. The user should give some additional consideration to the adjective meaning in this case. If the adjective is marked rare while the verb is common, it is likely there is reference to a special meaning.

Tricks are expensive in processing time. Each possible modification is made, then the resulting word goes through the full recognition process. If it passed, that is reported as the answer. If it fails, another trick is tried. This is effective if very few words get this far. It is expected that application of single tricks will solve most of the resolvable difficulties. It would be impractical to mechanically apply several tricks in series to a word. A large stem population reduces the likelyhood of multiple tricks being required. If the dictionary is heavily and redundantly populated, tricks are rarely necessary (and therefore not an overall processing burden) and largely successful (if the input word is a valid, but unusual, variant/construction).

Further, a conventional dictionary, especially one that wishes to set a standard for proper language, excludes words that may not meet criteria of propriety, slang, misspellings, etc. This may place the onus on the reader to convert words. A computer dictionary ought to relieve the reader as much as possible. The present program may be a far way from complete, but it's goal is to strive for that.

#### Word Meanings

The meanings listed are generally those in the literature/dictionaries. In the case of common words, there is general agreement among authors. Some uncommon words display convoluted interpretations.

Generally, the meaning is given for the base word, as is usual for dictionaries. For the verb, it will be a present meaning, even when the tense input is perfect. For an adjective, the positive meaning is given, even if a comparative or superlative form is shown. This is also so when a word is constructed with a suffix, thus an adverb constructed from its adjective will show the base adjective meaning and an indication of how to make the adverb in English.

For the level of usage for this program, and for convenience in coding, the meaning field has been fixed at 80 characters. It is possible to have multiple 80 character lines for an entry, but this only necessary for the most common words. In order to conserve space, extraneous helpers like 'a', 'the', 'to', which sometimes appear in dictionary definitions, are generally omitted. The solidus ('/') is used both to separate equivalent English meanings and to conserve space.

I have taken it upon myself to add some interpretations and synonyms, and propose common usage for otherwise complex descriptive definitions. The idea is to prompt the reader, expecting that the text may not be that from which some dictionary copied the meaning (from some 18th century translator!).

In the meanings I only use words of which I know the meaning. I find that in some cases the Oxford Latin Dictionary uses English that is not in the Oxford English Dictionary.

Where available, the Linnean or 'scientific Latin' name is given in parentheses, mostly for plants. This is not a classical Latin name, but a modern designation. Similarity of this designation to some Latin word may not be historically significant.

The spelling of the English meanings is US (plow not plough, color not colour, and English corn is rendered as grain or wheat), in spite of the fact that most of the Latin dictionaries that I have are British and use British spelling. The reason for this is (besides uniformity in the program) that there is much computer processing and checking of the dictionary data, including spell-checking of the English. (This is not to say that everything is correct, but it is much better than it would be without the computer checking.) All my programs speak US English, so I can count on it. Only some are available in UK English, and I do not have all of those versions.

Latin dictionaries seem to be locked into the 19th century. The English terms seem stilted, even by current British usage. This is probably because much work in translation was started then and later work tended to copy from the previous dictionaries. While this dictionary has done some modernization, some of the previous obscurities have been preserved. This was done in order that certain machine processes could compare the results of automatic translation with existing published work.

In addition, I have given US meanings to some terms that seem to be literally translated from the Latin (or German!) (a person who steals/drives off cattle is a rustler in the US).

Most dictionaries have an etymological approach, they are driven by the derivation of words to distinguish with separate entries words that may be identical in spelling but different derivations. But they can lump entirely different, even contradictory, meanings in a single entry if there is some common derivation. Philosophically, this dictionary is usually not sensitive to derivations, but sometimes supports multiple entries for vastly different meanings, application areas, or eras.

In a very small number of cases a source, such as OLD, will have an entry for which no English meaning is ptovifrd. Instead, a few words of Latin text containg the word is given. If they cannot figure it out, I certainly cannot. Such a source entry is usually omitted ftom WORDS.

#### Proper Names

Only a very few proper names are included, many just for test purposes, others that users have requested. The number of proper names is almost limitless but very few are applicable to a particular document, and if it is an obscure document it is unlikely that the names would be found in any dictionary.

Meaning for proper names may cite a likely example of a person with that name. This is just an example; there are lots of others with that name.

There is a switch (defaulted to Yes) that allows the program to assume that any capitalized unknown word is a proper name, and to ignore it. Also, one can make up a local dictionary of names for one's particular application.

#### Letter Conventions (u/v, i/j, w)

##### U and/or V

Strictly speaking, Latin did not have a V, just a consonant U, or a U character that was easier in capitals (the way Latin was written by the Romans) to write or chisel in stone as V. However, many modern texts and dictionaries (with the important exception of the OLD) make the distinction with two characters (u and v). It appeared most appropriate in a computer context (never destroy information) to make the distinction and follow the common practice. So all dictionary entries maintain the V/v. However, an input word following the U convention will be found. At an earlier version, an algorithm was kludged to convert where necessary. While this worked in most cases, there were difficulties. The present system processes the dictionary and the input word as though U and V were the same letter, although the basic dictionary maintains the distinction and the output reflects this. There is no need for the user to set modes for this process.

##### I and/or J

A similar situation arises with I, and its consonant form, J. In this instance, the common practice is use only I, but there are many counter-examples, both text and dictionaries. (Lewis+Short uses J, but OLD does not.) Because of common practice, the program started out as pure-I dictionary with conversion of J-to-I on input. It remained that way through many versions, in spite of the logical inconsistency with U-V. The technique worked perfectly, but eventually the aesthetic of consistency won out and the U/V technique described above was extended to I/J.

##### W

While the letter W does not exist in classical Latin, there are examples of W in medieval Latin. I have not directly faced this, and have few words in the dictionary yet with W. The W problem is not analogous to U/V. While W sometimes could correspond to V or UU, in most cases it is a valid letter, reflecting a Germanic origin of the word. It will be treated as a real letter, and tricks employed as useful.

###
DICTIONARY

#### Dictionary Codes

Several codes are associated with each dictionary entry (e.g., AGE, AREA, GEO, FREQ, SOURCE). Initially these were provided against the possibility of the program using them to make a better interpretation, however this additional information may be of some help to the reader. It is carried in codes because it is not available to the program in any other way. Other codes, like the KIND code for nouns, may be used, others may not. The program is still in development and these are put in to experiment with a possible capability. Later versions may use them, omit them, or provide others.

The program covers a combination of time periods and applications areas. This is certainly not the way in which dictionaries are usually prepared. Usually there is a clear limit to the time or area of coverage, and with good reason. A computer dictionary may have capabilities that mitigate those reasons. Time or area can be coded into each entry, so that one could return only classical words, even though matching medieval entries existed. (The program has that capability now, but it is not yet clear how to apply it.)

There is some measure of period and frequency that can be used to discriminate between identical forms, but if there is only one possible match to an input word, it will be displayed no matter its era or rarity. The user can choose to display age and frequency warnings associated with stems and meanings, but the present default is not to, although inflectios are so identified by default.

So far these codes have not been of much use, especially since the only significant exercises have been with classical Latin. Other situations may change this. Perhaps the only impact now is for those words which have different meanings in different applications or periods. For these the warning may be useful. Otherwise, if there is only one interpretation for a word, that is given.

Rare and age specific inflection forms are also displayed, but there is a warning associated with each such.

##### AGE

The designation of time period is very rough. It is presently based on dictionary information. If the quotes cited are in the 4th century, and none earlier, then the word is assumed to be late Latin, and one might conclude that it was not current earlier. One flaw in this argument could be that the citation given was just the best illustration from a large number covering a wide period. On the other hand, the word could have been well known in classical times but did not appear in any surviving classical writings. In such a case, it is reasonable to warn the reader of Cicero that this is not likely the correct interpretation for his example. This capability is still developmental, and its usefulness is still an open question.

If there is a classical citation, the word could be designated as classical, but unless there is some reason to conclude otherwise, it is expected that classical words are valid for use in all periods (X), are universal for well considered (published) Latin.

A designation of Early (B) means that there are not classical citations, except for poetry, in which the poet is invoking the past (or just straining for meter). Obsolete words occur similarly in English literature and poetry.

Much which is designated late or medieval may be vulgar Latin, in common use in classical times but not thought suitable for literary works.

In all periods the target is Latin. Archaic Latin, for purposes of the program, is still Latin, not Etruscan or Greek. Medieval Latin is that which was written by scholars as the universal Latin, not versions of early French or Italian.

      type AGE_TYPE is (
        X,   --              --  In use throughout the ages/unknown -- the default
        A,   --  archaic     --  Very early forms, obsolete by classical times
        B,   --  early       --  Early Latin, pre-classical, used for effect/poetry
        C,   --  classical   --  Limited to classical (~150 BC - 200 AD)
        D,   --  late        --  Late, post-classical (3rd-5th centuries)
        E,   --  later       --  Latin not in use in Classical times (6-10) Christian
        F,   --  medieval    --  Medieval (11th-15th centuries)
        G,   --  scholar     --  Latin post 15th - Scholarly/Scientific   (16-18)
        H    --  modern      --  Coined recently, words for new things (19-20)
                                 );

##### AREA

While the reader can make his own interpretation of the area of application from the given meaning, there may be some cases in which the program can also use that information (which it can only get from a direct coding). This has not yet been used in the program, but the possibility exists. If the reader were doing a medical text, then higher priority should be given to words coded B, if a farming book, then A coded words should be given preference.

The area need not apply to all the meanings, just that there is some part of the meaning that is specialized to or applies specifically to that area and so is called out.

    type AREA_TYPE is (
                            X,      --  All or none
                            A,      --  Agriculture, Flora, Fauna, Land, Equipment, Rural
                            B,      --  Biological, Medical, Body Parts
                            D,      --  Drama, Music, Theater, Art, Painting, Sculpture
                            E,      --  Ecclesiastic, Biblical, Religious
                            G,      --  Grammar, Retoric, Logic, Literature, Schools
                            L,      --  Legal, Government, Tax, Financial, Political, Titles
                            P,      --  Poetic
                            S,      --  Science, Philosophy, Mathematics, Units/Measures
                            T,      --  Technical, Architecture, Topography, Surveying
                            W,      --  War, Military, Naval, Ships, Armor
                            Y       --  Mythology
                                 );

##### GEO

This code was included to enable the program to distinguish between different usages of a word depending on where it was used or what country was the subject of the text. This is a dual usage, origin or subject.

    type GEO_TYPE is (
                           X,      --  All or none
                           A,      --  Africa
                           B,      --  Britian
                           C,      --  China
                           D,      --  Scandinavia
                           E,      --  Egypt
                           F,      --  France, Gaul
                           G,      --  Germany
                           H,      --  Greece
                           I,      --  Italy, Rome
                           J,      --  India
                           K,      --  Balkans
                           N,      --  Netherlands
                           P,      --  Persia
                           Q,      --  Near East
                           R,      --  Russia
                           S,      --  Spain, Iberia
                           U       --  Eastern Europe
                           );

##### FREQ

There is an indication of relative frequency for each entry. These codes also apply to inflections, with somewhat different meaning. If there were several matches to an input word, this key may be used to sort the output, or to exclude rare interpretations. The first problem is to provide the score. The initial method is to grade each word by how much column space is allocated to it in the Oxford Latin Dictionary, or the number of citations, on the assumption that many citations mean a word is common. This is not the main intent of the compilers of existing dictionaries, but it is almost the only indication of frequency that can be inferred from the dictionaries. In many cases it seems to be a reasonable guess, certainly for those most common words, and for those that are very rare.

FREQ guessed from the relative number of citations given by sources need not be valid, but seems to work. If the compiler's purpose were just to give sufficient examples to clarify the use of the word, perhaps a single reference would serve for a simple word. However one might observe that dictionary people seem to be enamored with filling up this section whenever possible. ('et' has more than a page in OLD.) If there is only one citation, they could only find one. (This assertion can now easily be verified by searching the texts available on the Internet.) With the understanding that adjustments can be made when additional information is available, the initial numeric criteria are:

    A   full column or more, more than 50 citations - very frequent
    B   half column, more than 20 citations - frequent
    C   more then 5 citations - common
    D   4-5 citations - lesser
    E   2-3 citations - uncommon
    F   only 1 citation - very rare

In the case of late Latin in Lewis and Short, these frequencies may be significant underestimates, since the volume of applicable texts considered seems to be much smaller than for classical Latin resulting in fewer opportunities for citations. Nevertheless, barring additional information, the system is generally followed.

For the situation where there are several slightly different spellings given for a word, they all are given the same initial frequency. The theory is that the spelling is author's choice while the frequency is attached to the word no matter how it is spelled. I presume that for a specific text the author always spells the word the same way, that there is no distribution of spellings within a individual text. One exception to this rule is the case where a variant spelling is cited only for inscriptions. There may be some significance to this and a FREQ of I is assigned. The logic of this choice is debatable. However, for some variations there is clearly a difference in application and this can be reflected in the frequency code. Likewise, there are situations wherein words of the same spelling but different meanings may have different frequencies. This may help to select the most likely interpretation.

One has a check against the frequency list of Diederich for the most common, and those are probably the only ones that matter. But the frequency depends on the application, and it should be possible to run a new set of frequencies if one had a reasonable volume of applicable text. The mechanical verification of word frequency codes is a long-term goal of the development, but must wait until the dictionary data is complete.

Inscription and Graffiti are designations of frequency only in that the only citations found were of that nature. One might suppose that if literary examples were known they would have been used. So one might expect that such words would not be found in a student's text. There is no implication that they were not common in the spoken language.

A very special case has been created for 'N' words, words for which the only dictionary citation is Pliny's Natural History. It seems, from reading of dictionaries, that this work may be the only source for these words, that they do not appear in any other surviving texts. They are usually names for animals, plants or stones, many without identification. Such words may appear only in Lewis and Short and the Oxford Latin Dictionary, the unabridged Latin classical dictionaries. These words are omitted from most other Latin dictionaries and, although they fall in the classical period and are from a very well known writer, there is no mention of the omission. So there may be an argument to disparage these words, unless one is reading Pliny.

Most of these words are of Greek origin (although that is also true for much of Latin). For many, the dictionaries report different forms or declensions for the word giving the same citation. Often one dictionary will give a Greek-like form (-os, -on) where another gives a Latinized form (-us). There is no consistency. Both OLD and L+S disagree on Latin and Greek forms, with no overwhelming favoritism to one form attached to either dictionary. This may be a reflection of the fact that the dictionaries grew over a long time with several editors, many workers, and no rigid enforcement of standards.

I have made it a point to try to complete (give M, F, N) Greek adjectives where other dictionaries give only a single form. To do this I have referred to the base Greek in Liddell + Scott Greek-English Lexicon, assuming that any Roman scholar pedantic enough to use a Greek form knew the Greek and would draw on that knowledge.

There is another problem that is found chiefly in connection with Pliny-type words. Since the literature is very sparse on examples, it is often uncertain whether a particular usage is appropriately listed as a noun, as an adjective, or as adjective used as a substantive. The present dictionary, in blessed innocence, records all forms without bias.

        type FREQUENCY_TYPE is (     --  For dictionary entries
        X,    --              --  Unknown or unspecified
        A,    --  very freq   --  Very frequent, in all Elementry Latin books, top 1000+ words
        B,    --  frequent    --  Frequent, next 2000+ words
        C,    --  common      --  For Dictionary, in top 10,000 words
        D,    --  lesser      --  For Dictionary, in top 20,000 words
        E,    --  uncommon    --  2 or 3 citations
        F,    --  very rare   --  Having only single citation in OLD or L+S
        I,    --  inscription --  Only citation is inscription
        M,    --  graffiti    --  Presently not much used
        N     --  Pliny       --  Things that appear only in Pliny Natural History
                          );

For inflections, the same type is used with different weights

    --  X,    --              --  Unknown or unspecified
    --  A,    --  most freq   --  Very frequent, the most common
    --  B,    --  sometimes   --  sometimes, a not unusual VARIANT
    --  C,    --  uncommon    --  occasionally seen
    --  D,    --  infrequent  --  recognizable variant, but unlikely
    --  E,    --  rare        --  for a few cases, very unlikely
    --  F,    --  very rare   --  singular examples,
    --  I,    --              --  Presently not used
    --  M,    --              --  Presently not used
    --  N     --              --  Presently not used

##### SOURCE

Source is the dictionary or grammar which is the source of the information, not the Cicero or Caesar text in which it is found.

For a number of entries, X is now given as Source. This is primarily from the vocabulary (about 13000 words) which was in place before the Source parameter was put in, and some have not been updated. They are from no particular Source, just general vocabulary picked up in various texts and readings. Although, during the dictionary update beginning in 1998, all entries are being checked against sources, it may be improper to credit (blame?) a Source when that was not the origin of the entry, remembering that the actual entries are of my generation entirely and may not correspond exactly to any other view. However, in the second pass (as far as it has progressed) all classical entries have been verified with the Oxford Latin Dictionary (OLD). (By that I mean that I have checked, not to imply that I have not made errors.) This does not mean that the entry copies or agrees with the OLD, but that I read the OLD entry with great respect and put down what I did anyway. Newer entries, added in this process, and those checked later in the process, if found in the OLD, have the O code. Words added from Lewis and Short, but not in OLD, have the S code, etc. All entries for which there is a Source will be found in some form in that Source, but the details of the interpretation of declension and meaning is mine. Each entry is my responsibility alone, and there are significant differences and elaborations. They may not necessarily be found as primary entries, or even directly referrenced, but they will have been constructed from information in that source. For instance, the remark 'adp see app' in a source dictionary may generate 'adp' WORDS entries that are not explicitlt mentioned in the source dictionary. There might be occasions where the source gives a noun but on my own initiative I have also introduced the corresponding adjective (or the converse), particularly if that usage was found in a text. In such a case the source would be the same. If I have done a proper job, the reader will not often be surprised.

An important implication of the SOURCE is age. OLD contains words from the classical period of Latin, and these are carried forward to all ages. Thus AGE for OLD entries will be X (all ages). Those in L+S, but not in OLD, might be checked against the premise that they were late/post-classical Latin (D), citations being the determining factor. Souter (SOURCE=P) is a wordlist of later Latin (AGE=E), so his entries might be presumed not to be common in classical times. Other sources, indicated by AGE flags or by parenthesized comments, may also indicate to the user the age appropriate for the entry. Calepinus Novus (Cal) (SOURCE=K) is especially noteworthy in that it is of modern, 20th century Latin and its meanings should probably not be applied to earlier texts.

OLD is taken as the most authorative source and if it is in OLD then it was used in classical times within a very limited period. An entry with source O will have AGE X (or C if it is unique to classical). This also define good Latin and the usage should be valid for all ages.

Lewis and Short (S) is next in authority and also somewhat in time. It covers, in addition to classical, a later period. That a word appears in S but not in O may mean it is a somewhat later usage. If that poiint is well established, the AGE is D. But most often the main source is OLD and there are additional meanings indicated as L+S. The user is warned that this may be a case of modified meaning coming into use at a later age. But it may be that, after review of L+S, OLD differs for reason and has a better interpretation.

A formation from a classical word with the natural meaning is usually assumed to also be appropriately classical/general - X. Such a word with an enhanced, specialized or modified meaning might indicate a later usage, and is so labeled. It may be that the word was in use earlier but no reference is available, In some cases, an additional meaning is identified as (L+S) just to give credit, without implying anything further.

In time, Souter (P) is next. Again if it is in Souter but not O of S it is very likely later Latin The date may reflect this, but the source is a hint to the user, not an firm promise.

Next in line in time is Latham (M) for medieval Latin.

Souter and Latham are poorly represented. There is no attempt to include these sources with the throughness of the OLD and L+S effort. Entries from these sources come up only when a particular word is submitted from a text and no other source serves, giving credance to the assumption that such entries belong to a later AGE..

Stelten (Ecc) is more fully represented (goal to complete) since it specializes in an area not well covered by other sources. While it is a complete dictionary, with all the general words, it has a number of entries specifically or solely applicable to the Christian Church. These are from later (non-classical) times, chiefly medieval.

Licoppe (K) is modern. An additional meaning on a word from an earlier AGE is likely to be uniquely modern.

Note that there are examples in which different sources at different ages give contrary meanings. This may reflect a real and not uncommon shift in meaning, or there may be errors in the sources. At least in such cases the sources (and their implied ages) are identified.

The list of sources goes far beyond what has been directly used so far. There should be no expectation at this point in the development that all these sources have even been used. They are listed as I have copies and as they might be consulted. They are encoded so that the program might recognize and process the source should it come up. I have sought and received permission for those which have been extensively used. Others have only been used for an occasional check (fair use).

      type SOURCE_TYPE is (
        X,      --  General or unknown or too common to say
        A,
        B,      --  C.H.Beeson, A Primer of Medieval Latin, 1925 (Bee)
        C,      --  Charles Beard, Cassell's Latin Dictionary 1892 (CAS)
        D,      --  J.N.Adams, Latin Sexual Vocabulary, 1982 (Sex)
        E,      --  L.F.Stelten, Dictionary of Eccles. Latin, 1995 (Ecc)
        F,      --  Roy J. Deferrari, Dictionary of St. Thomas Aquinas, 1960 (DeF)
        G,      --  Gildersleeve + Lodge, Latin Grammar 1895 (G+L)
        H,      --  Collatinus Dictionary by Yves Ouvrard
        I,      --  Leverett, F.P., Lexicon of the Latin Language, Boston 1845
        J,
        K,      --  Calepinus Novus, modern Latin, by Guy Licoppe (Cal)
        L,      --  Lewis, C.S., Elementary Latin Dictionary 1891
        M,      --  Latham, Revised Medieval Word List, 1980
        N,      --  Lynn Nelson, Wordlist
        O,      --  Oxford Latin Dictionary, 1982 (OLD)
        P,      --  Souter, A Glossary of Later Latin to 600 A.D., Oxford 1949
        Q,      --  Other, cited or unspecified dictionaries
        R,      --  Plater & White, A Grammar of the Vulgate, Oxford 1926
        S,      --  Lewis and Short, A Latin Dictionary, 1879 (L+S)
        T,      --  Found in a translation  --  no dictionary reference
        U,      --  Du Cange
        V,      --  Vademecum in opus Saxonis - Franz Blatt (Saxo)
        W,      --  My personal guess
        Y,      --  Temp special code
        Z       --  Sent by user --  no dictionary reference
                --  Mostly John White of Blitz Latin

        --  Consulted but used only indirectly
        --  Liddell + Scott Greek-English Lexicon

        --  Consulted but used only occasionally, seperately referenced
        --  Allen + Greenough, New Latin Grammar, 1888 (A+G)
        --  Harrington/Pucci/Elliott, Medieval Latin 2nd Ed 1997 (Harr)
        --  C.C./C.L. Scanlon Latin Grammar/Second Latin, TAN 1976 (SCANLON)
        --  W. M. Lindsay, Short Historical Latin Grammar, 1895 (Lindsay)
                            );

#### Current Distribution of DICTLINE Flags

    Number of lines in DICTLINE GENERAL  1.97F    39187

    AGE
    X         28858
    A         61
    B         446
    C         58
    D         3937
    E         1718
    F         1996
    G         1920
    H         193

    AREA
    X         29181
    A         2955
    B         912
    D         410
    E         1916
    G         504
    L         1221
    P         181
    S         730
    T         382
    W         722
    Y         73

    GEO
    X         38147
    A         64
    B         52
    C         1
    D         3
    E         49
    F         67
    G         20
    H         278
    I         141
    J         4
    K         6
    N         8
    P         9
    Q         312
    R         1
    S         25
    U         0

    FREQ
    X         11
    A         2133
    B         2711
    C         10757
    D         2678
    E         11218
    F         7982
    I         424
    M         0
    N         1273

    SOURCE
    X         7554
    A         0
    B         41
    C         1751
    D         14
    E         1417
    F         119
    G         59
    H         0
    I         4
    J         116
    K         2100
    L         60
    M         759
    N         84
    O         16039
    P         296
    Q         24
    R         12
    S         8094
    T         88
    U         0
    V         47
    W         316
    Y         35
    Z         158

#### Dictionary Conventions

There are a few special conventions in setting codes.

Proper Names

Proper names are often identified by the AGE in which the person lived, not the age of the text in which he is referenced, the AREA of his fame or occupation, and the GEO from which he hailed. This refers to some most-likely person of this name. A name may be shared by others in different ages. Thus Jason, the Argonaut, is Archaic, Myth, Greek (A Y H). (It is not likely that a Latin text would refer to a TV star.) Tertullian, an early 3rd century Church Father from Carthage, author of the first Christian writings in Latin, is Late, Ecclesiastic, Africa (D E A). Jupiter is (A E I), which is a bit sloppy since he is present later. Today he may be a myth, but then he was a god. But even gods are not eternal (X) in language, and an initial place is found for them. Place names are likewise coded, although with less confidence.

Vertical Bar

While not visible to the user, the dictionary contains certain meanings starting with a vertical bar (|). This is a code used to identify meanigs that run beyond the conventional 80 characters. One or more vertical bars leading the meaning allows tools to recognize that they are additional meanings to an entry already encountered, usually the entry immediately before when the sort is for that reason. This is only of concern to those dealing with the raw dictionary who have asked.

#### Evolution of the Dictionary

The stem list was originally put together from what might be called 'common knowledge', those words that most Latin texts have. The first version had about 5000 dictionary entries, giving up to 95% coverage of simple classical texts. This grew to about 13000 entries with specific additions when gaps were found. With this number it was possible to get better than a 99% hit rate on Caesar (an area from which the dictionary was built). Parse of other works fell to 95-97%, which may be mathematically attractive but leaves a lot to be desired in a dictionary, since a translator is usually familiar with the vast bulk of the language and just needs help on the obscure words. Having just the common words is not enough, indeed not much help at all. So an attempt is made to make the dictionary as complete as possible. All possible spellings found in dictionaries are included.

Starting with the 13000, the expansion project beginning in 1998 sought to verify the existing words and supplement with any new found ones. Thus all classical Latin words are consistent with the OLD (not to say taken from, because most were not, but checked against). Any significant deviation is indicated, either as from another source, or in the definition itself.

L+S is used for later Latin and to check OLE work. This started with the thought that if a word was in L+S but not in OLE it must be later Latin, beyond the range of OLD. I was surprised at how many words with classical citations were in L+S but not in OLD, and how many are of different spelling.

The refinement is proceeding one letter at a time, as is the tradition for all great dictionaries. First stage refinement has proceeded through DI.

#### Text Dictionary - DICTPAGE.TXT

In response to many requests, a simple ASCII text list has been created of the WORDS dictionary, in what might be called the paper dictionary form. Each coded dictionary entry has been expanded to its dictionary form (nominitive and genitive for nouns, four principle parts for verbs, etc.). In content it is like a paper dictionary, but each entry is on one long line and the headwords are in all capitals, convenient for case-sensitive search. The headwords are listed alphabetically (not the same as the coded file) and offered in an ASCII/DOS text file DICTPAGE.TXT which may be searched from the user's browser, or best downloaded and searched by any editor off-line. To make it possible to search on-line, the file is not compressed and so is about 3 MB.

#### Latin Spellchecking - Text Processor List - LISTALL.ZIP

I have done a lot of Latin spell checking directly with WORDS. All you have to do is put the text in a file, run WORDS with a text file (@) input, and require output of an WORD.UNK file (see # parameters). It is sometimes useful to run without FIXes and TRICKS first, then run the resulting first-pass UNKNOWNs and look at the full WORD.OUT to make sure the modifications are reasonable.

There are other techniques. As I understand it, WORD2000 and other processors take a simple list of valid spellings and use that for spellchecking. I am speaking on secondhand information. I have not tried to do the WORD2000 job. However several people have proposed to use my dictionary files to do so.

Since Latin is an inflected language, each dictionary entry expands to many "words", often hundreds. The present WORDS raw dictionary would expand to an enormous number of simple words, but that is not the end of it. Each of those words might have attached prefixes and suffixes, enclitics, and spelling variations. Literaly billions of different words can be parsed and analyzed by the WORDS program. These are legal Latin words, whether any Roman actually spoke them. Of course, one could make a list of all the words in Cicero, or in the Vulgate, and make a dictionary of those (and we are close to that), but the body of medieval Latin is enormously greater than that of classical Latin on which most dictionaries are based.

In response to several requests, a simple ASCII text list has been created of the two million primary words that the WORDS program and dictionary can form by adding inflections to stems. This list has been reduced to half by eliminating duplicates. The downloadable ZIP of this file is over 2 MB.

The purpose of such a list is to provide data for conventional word processor spell checking.

Currently there are some ommissions.

1) Latin has a widely used enclitic, -que, also -ne and -ve. In principle these could be tacked on to almost any word. If the spell checking system had the capability of recognizing them, that would be the most convenient way of handling this problem. Otherwise, completeness would require their addition to every word, quadrupling the size of the list.

2) Many Latin verb forms are subject to syncope, contracting the form for pronounciation. In WORDS this is handled by a process. For the list another method must be used and the contracted words generated by modifing both stem and ending.

3) There are some common combined words in Latin in which the first part of the word is declined, followed by a fixed form. Unlike the enclitic situation, these forms are limited and should be generated seperately (quidam). Other qu- pronouns are handled seperately in WORDS and need special processing here also.

4) Uniques have not yet been added. This is a trivial matter.

5) There is the problem of prefixes and suffixes. WORDS provides for hundreds of these. It would be impractical to multiply the list by mechanically including all such possibilities. Fortunately, this may not be a significant problem. The philosophy for the dictionary has been to include all words, even those which could be easily generated by a base and fixes, as they occur or are found in sources. This means that the most common compound words are in the system, but that coverage is mostly concentrates on classical Latin.

6) In later times especially, there came some more or less common spelling variations. These are handled in WORDS by TRICKS. They can be relatively expensive, but are only applied to words which otherwise have failed, are these are becoming rarer. This process, if generally applied, would not only expand the list enormously, the added words would not advance the goal of spell checking. They are, in some sense, misspelled words. For a reader, it can be useful to have a guess at the word. He can examine the form and context and judge whether it makes sense. It is not a process to be applied mechanically.

7) There is a divergence in the way editors treat the non-Latin characters J and V. These are the consonant forms of I and U. They are explicit in English, so for convenience, familiarity, and pronounciation general practice in the past has been to use them. More recently, some academic purists have rejected this and eliminated J and V altogether. (Note that the same purists use lower case letters, in spite of the fact that the Romans had only the upper case.) WORDS keeps the variant characters in the dictionary and maps them to a single character in processing. A list could include both expressions, and it would only add a few percent in size. However, that would allow inconsistent spelling choices in a text. This seems to be contrary to the goals of a spell checker. It is probably better eventually to offer two seperate lists so that the user may select the option appropriate for his work.

All the above factors are applied by processes in the WORDS program. Running WORDS looking for UNKNOWNS will give a superior spell check, but the list can be useful in conjunction with common editors. Experience will determine its effectiveness.

###
INFLECTIONS

Inflections for WORDS are in a human-readable file called INFLECTS.LAT. Presently there are almost 1800 separate entries. This data is processed to produce a file INFLECTS.SEC used by the code. The format of INFLECTS.LAT is simple, as for example:

    N     1 1 NOM S C                 1 1 a             X A

    V     1 1 PRES  ACTIVE  IND  1 P  2 4 amus          X A

    PREP  ACC                         1 0               X A

The part of speech is given,along with the appropriate characteristics for a particular inflection. The inflection/ending is specified by the stem to which it is attached, a number of characters, and the ending string. There is an AGE and FREQ for each entry.

###
ENGLISH to LATIN

A fairly new application for the WORDS dictionary has been an attempt to go English to Latin. Up to now there is no satisfactory computer facility for this. The best on the net is a search of the Perseus dictionary, finding all uses of the English word in the text of the dictionary. One can do the same with the WORDS dictionary, and DICTPAGE.TXT is a convenient form for that purpose. In the present release of WORDS, a primitive English-to-Latin facility has been implemented, based on this inverted dictionary method.

However, except for very simple situations, the resulting raw output can be excessive and often spurious. It is necessary to TRIM the output for the general user. In order to do this, one needs to be able to computer parse the MEAN field and prioritize the significance of a word appearing therein. This is a more rigorous requirement than the one applied hitheretofore, that MEAN should be human-readable. Now it must be computer parsed. Therein lies the reason for a formal set of rules for constructing MEAN. These rules are new and certainly have not been applied throughout the dictionary yet, further, they may change in the future if more powerful ordering algorithms evolve.

The primary rule is that nothing should surprise or inconvenience the casual user of WORDS. Further, for system independence, the MEAN line should be readable by anyone in ASCII, without special characters or fonts.

I have just begun to work on an English-to-Latin capability. Initially this is just a inversion of the WORDS Latin dictionary, extracting all the English words in the MEAN field of the WORDS dictionary and associating these with the corresponding Latin entry. A real English-to-Latin is much more than that. To construct from first principles, one should take a set of English words and find the Latin equivalent, not the reverse. Nevertheless, WORDS now has some primitive capability.

The raw inversion produces almost 200_000 English words. WEEDing them by the present algorithms (eliminate a, the, to, ..., and a number of common modifiers when included in meanings not of their part of speach) reduces this number only by a third. But this finally results in only somewhat over 20_000 unique words, less than the number of Latin entries! This probably reflects more on dictionary makers than on the languages.

English is certainly a far richer lanaguage than Latin, measured by the number of individual words. WORDS has about 40_000 Latin entries, and the corresponding inversion to English yields only 22_000 unique English words.

The reason seens to be that, while English may have lots of words for love or hate, in making up a Latin dictionary one will opt to give a simple translation. So while love is a proper translation of a number of Latin words, and one could as well replace it with any of dozens of English synonyms, a dictionary compiller will usually take the simplest English word that provides the reader with the meaning. That is what the reader usually wants.

Starting from an English basis to produce an English-to-Latin dictinoary gives an entirely different outcome. In that case, the full power of English can be invoked, and it is the Latin that will seem simple by comparison.

In many cases, an English-to-Latin dictionary bound in the same volume as a Latin-to-English will have been developed by a different author, and sometimes they are not consistent. At least the inversion procedure assures basic consistency.

One problem with the inversion method is that one needs to weed out a lot of the chaff before presenting to the user. And even then there are a lot of choices for the user. GOLD occurs 120 times; COPPER, 57 times: ABANDON, 24 times, plus several times for ABANDONED, ABANDONS, ABANDONING, and ABANDONMENT. Further trimming has to get very severe!

If the program is run with TRIM_OUTPUT parameter set (this parameter works on both Latin and English output), the six highest priority (by FREQ or whatever the current algorithm is) will be listed. This should serve for the general user. Turning off this parameter allows the program to list all instances found in the Latin dictionary, which were not removed by WEEDing in the data preparation.

Finally there is the problem that most paper Latin dictionaries harken back to the 19th century or earlier, even those published more recently. Their base English may not be current. Take a purely hypothetical example. On the first page of every English-Latin dictionary is abase. This is a good 18th century word. Today one is more likely to see humble, degrade or humiliate, and those are the words the user is more likely to request. But the dictionaries from which WORDS draws may be fonder of abase as the meaning of a Latin word which could serve for any of these. The user may want to try some synonyms, but this can be a considerable burden. A built-in thesaurus could mechanically generate a broad range of words to include, but this is surely overkill and will generate so many inappropriate results as to render the search excessively cumbersome. The user is advised to check the meanings returned for suggestions as to what other words might be tried, if the immediate result does not seem satisfactory.

One important point is that the program mechanically searches the Latin dictionary. If one is looking for a adjective, presently one will find all adjectives for which the MEAN contains the search word, no more. However one should be aware that participles of appropriate verbs can also serve as adjectives and may be a better choice.

At the present time there is no complex constrution/deconstruction of the English input. Thus if the input is 'kill', only Latin entries with the exact word 'kill' in their MEAN will be selected. The suffixed words 'kills'/'killing'/'killed'/'killer'/etc. will not be found. They must be queried seperately. Likewise, unlike the Latin phase of WORDS, prefixes are not extracted. It may be desirable in the future to provide such additional capabilities. This would be value added over simple search by the program.

#### English Parsing of Meanings

Puncuation in meanings is now formalized, in order to allow computer processing of the text. Diviation from these rules would make parsing of the English very difficult, so they must be enforced. There is nothing which will mislead the user, but it goes beyond standard text practice.

The semicolon separator has greater significance. Various groups of meanings may have varying frequency or likelihood. The most likely are placed first and thereby prioritized. Within a semicolon group (SEMI) of meaning/synonyms separated by commas or slashes, their probability is assumed to be the same. Where possible, a PURE word (e.g., 'perhaps') should lead, followed by compound meanings (e.g., 'it may be'). There is much work to do before this ordering is complete.

Any PURE meaning (one not involving modifiers) set off by commas or slashes, is assigned a high priority on output that a modified/compound meaning in the same MEAN SEMI.

Semicolons seperate meaning groups that have a different flavor/sense. Initially the interpretation and selection among these were left to the user, as in paper dictionaries. Recent requirements demand an ordering of these groups. The order of the semicolon groups (called SEMIs in the code) should indicate the frequency or probability of that meaning among different groups, where this inferrence can be made. This ideal is not yet rigorously enforced, even in recent entries, and less so in those earlier in the update.

Commas separate meanings that are roughly equivalent - synomyns. In parsing, a COMMA consistes of the words between commas. There is no inherent logical order within a SEMI, however, to support another application for the dictionary, full sentence Latin-to-English translation, it is desirable to be able to pick a single, simple, modern English word that is most likely to be the translation. This should be the first word of the meaning.

Question marks and exclamation points may appear as an integral part of the meaning. They do not replace the comma/semicolon separator, as in normal text.

The soldius/slash (/) does the work of 'or' in many cases. It is used solely to conserve space, to compress the meaning line to no more than 80 characters. It separates (generally close) synonyms and also alternative options (jump up/out = jump up; jump out).

Plus (+) is used in the dictionary, as well as in this documentation, in place of ampersand, for compatibility with HTML. It s a full separator, between two words, each recognized separately.

Hyphen (-) should be is used in the dictionary only to break into two words in the parse, each recognized separately. Thus, book-keeper will appear in the English pharse as two words. But it is likely that a user looking for an accountant would search for bookkeeper, rather than book or keeper. The dictionary has not yet been scrubbed for this situation.

Parentheses set off both possible supporting words (go (down) = go; go down) and explanatory information. Since parenthesized words are excluded from the extraction process, they are a way to further reduce clutter in the English dictionary. Words in the meaning that should not find this entry when searched can be excluded from the English dictionary tables by parenthesizing. (NOTE: two sets of parentheses not separated by a comma or semicolon can cause processing troubles and should be avoided.)

Square brackets enclose translation examples or idioms, a Latin expression to English equivalent. The English translation of the Latin is introduced by =>. The parser expects this (=>) token. A bracketed expression is always at the end of the meanings line so that it may be extracted before spellchecking, otherwise the spellcheck will fail on the Latin and there are an inconveniently large number of these examples. Brackets should never be use where parentheses are appropriate.

Generally, articles (a, an, the) are omitted in meanings. While this compresses the line, it also reflects the fact that Latin does not distinguish between those uses. To define agricola as 'a' farmer would disparage the possiblity of the proper translation being 'the' farmer. Most dictionaries report nouns without an article. This one go further and avoids the use of articles almost everywhere.

Some dictionaries prefix verb meanings with TO. This is superfulous, except in the case of a list of meanings not distinguished by part of speech (to cut, a cut), not the situation for this dictionary.

Vertical bars at the begining indicate continuation meaning lines. There may be several continuation lines, numbered/ordered by the number of leading vertical bars. For words with a large number of meanings, additional meaning lines are provided by another entry for the same stems and part with what amounts to a continuation line for MEAN. In order to associate the resulting series of meaning lines, a vertical bar (|)is placed at the begining of the first continuation MEAN, two bars for the second, etc. The dictionary is sorted so as to assure that these entries are grouped and ordered. This allows checking of the dictionary for spurious duplicate entries without flagging intended continuation entries. Further it facilitates compression of the WORDS output by combining the inflection output for the several identical parts followed by the group of meaning lines. The STEMS and PART are identical for the base (no |) and all extensions. They are all the same word, however they may have different flags, that is, there may be different meanings for different AGE or AREA.

The bar is a code for MEAN continuation seen only in the raw DICTLINE. Bars are removed before WORDS output and are not visible to the user. There are also some entries with identical STEMS and PART which are really different words, different derivation and completely different meanings. These will not be | coded and will be reported separately in output. {NOTE: The vertical bar should not appear anywhere in meanings except at the begining as a continuation flag.)

Correct use of symbols/codes in MEAN is very important. One must not use them 'free form'. They are used in the parsing of MEAN and inproper use can defeat a processing program. While some main programs have many built-in checks, there are a number of secondary tools which are not so 'fool proof'. MAKEEWDS is a complicated program which I did not do well. If it hits something strange it might well fail to properly parse that MEAN. The program will still complete and the output will only lose a part of the strange MEAN, affecting only the English mode, and may or may not not give a report on the failure.

#### Ordering English-to-Latin Output

Essentially we start by associating English words in the dictionary entry meaning with the entry number (line number in DICTLINE). The list of English words (EWDSLIST) is sorted so that all occurances of a particular word are together. Then, upon inquiry, a list of the associated Latin dictionary entries is output. Unfortunately this list could be large (a hundred or more for some common words) and thereby user-unfriendly. The task is to order the list and reduce the output to a few most likely

Priorities for display are based on frequencies. Besides the basic FREQ assigned to the entry, it is presumed that the frequency is greater for those meanings in the first SEMIs, with gradually decreasing frequency assigned to later SEMIs and to bar flagged continuations. The algorithm presently used is summarized below, but it is subject to modification in future versions.

Each English word found is given a numerical RANK/priority/weight based on the algorithm below. The numerical values of each consideration are added or subtracted to give the priority of the entry.

##### FREQ

The obvious choice for frequency weights might be the comparative paper dictionary citations, which would be roughly:

    A=>50
    B=>25
    C=>10
    D=> 5
    E=> 3
    F=> 1

However these would weight the A frequency so heavily that it would be impossible to overcome with anything that could be applied to lower frequencies. So we must reject this scale for a more managable set:

    A=>70
    B=>60
    C=>50
    D=>40
    E=>30
    F=>20
    etc.

(N is special case, add 25 after formula)

##### Compounds

Compound words ('very tall' vs. 'tall') are often useful, indeed the user may be looking for components to make up a compound translation, however generally they should be disparaged relative to the pure/simple word. A compound A FREQ might be no better than a pure D.
Compound Yes=> 0
Compound No (Pure) => 10
Which SEMI (a SEMI is a part of MEAN set off by semicolons)
-3 per SEMI after 1

Further, a word on a continuation line is disparaged by 3 SEMIs (-9).

The words in the first SEMI are enhanced in the expectation that they are the primary meaning. This follows the tenuous idea that there is a single simple translation for each English word. At least the first SEMI is emphasized.
If PURE and 1st SEMI => 5

Priority = FREQ value + Compound value + SEMI value + Continuation value + First SEMI value
Example: for lamp - lanum N 3 2 N

    FREQ A => 70
    Compound No => 10
    Semi 2 => -3
    Continuattion Line No => 0
    Pure 1st No => 0
    RANK/priority => 77

###
TESTS AND STATUS

#### Testing

The program has been run against common classical texts. Initially this was mostly a check of the process and reliability of the program. It is now possible to run real texts and get valid statistics. Relatively few texts have been run multiple times in order to understand exactly where failure occured and to regression test the solutions. Such testing has taken place on texts totaling well over a million words. The best results come from those which have been run the most times. Caesar and the Vulgate are essentially without unknowns (excluding proper names., Seutonius and Virgil are at the 0.1% level, Varro and Pliny have somewhat more than 1% unknowns due to their specialized vocabulary. While this is a mechanical test and does not assure that the form and meaning reported by the program is always correct, the actual number of misses found by limited detailed examination is vanishingly small.

A far larger test (with feedback) has been made by John White in the development of his Blitz Latin. While not using WORDS, he has a program from much the same basis, incorporating approximately the WORDS dictionary. He has run a much larger set of texts, including both classical and medieval, to the extent of 20 million Latin words, and provided significant unknowns to be included in WORDS.

The hardest test is against another dictionary. While getting a 97+% hit rate on long classical texts, a run against a large dictionary might fall to 85-90%, the missing words being in those letters which the update has not reached. This is to be expected, since we both have the 10000 most common words and have made somewhat different additions beyond that. So large electronic wordlists are a check on the program, and have been reserved for that purpose, not simply incorporated as such.

We have gone so far that this is no longer significant and wordlists can be integrated. The only real impact has been the inclusion of modern Latin words which come from such lists, and not from scans of texts.

##### English-to-Latin Tests

So far there have been no formal validation of the English-to-Latin capability. There have been numerous individual checks and anacdotal testing, as well as some mechnical performance tests, but nothing fundemental.

The first test proposed is to take a small English-to-Latin dictionary, say from the back of an introductory textbook, and check that the Latin suggested for each entry is found in the top six returned by WORDS. It is expected that there will be a high corespondence (to be shown). Taking a much larger example may give a different result. It may be that the Latin words chosen by WORDS are not the same as the paper dictionary.

#### Current Status and Future Plans

The present phase of refinement has incorporated the Oxford Latin Dictionary and Lewis and Short entries into D (about a fourth). Periodically, when I need a change of task, I run a major author to check the effectiveness of the code. I may then include some words which turn up frequently as unknowns, but this is done as the spirit moves me. Smaller sections of later authors may also be processed, giving some growth in medieval Latin entries. Recently I have worked the Vulgate of St. Jerome.

John White in support of his Blitz Latin program has run a very large body of Latin text, including much medieval legal documents. He provides input to the dictionary as he finds significant unknowns.

I will continue to refine the dictionary and the program. The major goal is to complete the inclusion of OLD and L+S, and this may take years. Along the way, and later, I will expand to medieval Latin. I am not so unrealistic as to believe that I will 'finish', indeed, this is a hobby and there is no advantage to finishing.

An eventual outcome would be to have some institution, with real Latin capability, provide an exhaustive and authoritative program of this nature. Until then, I and other individuals will make available our programs.

###
USER MODIFICATIONS

#### Writing DICT.LOC and UNIQUES.LAT

To make the dictionary files used by the program is not difficult, but it takes several auxiliary programs for checking and ordering which are best handled by one center. These are available to anyone who needs them, but it is better that any general additions to the dictionary be handled centrally that they can be included in the public release for everyone.

However, it is possible for a user to enhance the dictionary for special situations. This may be accomplished either by providing new dictionary entries in a DICT.LOC file, those to be processed in the regular manner, or to add a unique (single case/number/gender/...) in a text file called UNIQUES.

#### DICT.LOC

A dictionary entry for WORDS (in the simplest, editable form as read in a DICT.LOC) is

    aqu   aqu
    N    1 1 F T     X X X X X
    water;

For a noun there are two stems. The definition of STEM is inherent in the coding of inflections in the program. Different grammars have different definitions. There is no formal connection with any other usage.

To these stems are applied, as appropriate, the endings

             S       P
    NOM      a       ae
    GEN      ae      arum
    DAT      ae      is
    ACC      am      as
    ABL      a       is

Or rather, the input word is analyzed for possible endings, and when these are subtracted a match is sought with the dictionary stems. A file (INFLECTS.LAT) gives all the endings.

In this example, the first line

    aqu   aqu

contains the two noun stems for the word found in printed dictionaries as

    aqua, -ae

The second line

    N    1 1 F T     X X X X X

says it is a noun (N), of the first declension, first variant, is feminine (F), and is a thing (T), as opposed to a person, location, etc. The X X X X X represents coding about the age in which it is applicable, the geographic and application area of the word, its frequency of use, and the dictionary source of the entry. None of this is necessary in a DICT.LOC although something must be filled in and X X X X X is always satisfactory.

The last line is the English definition. It can be as long as 80 characters.

    water;

The case and exact spacing of the stems and codes is unimportant, as long as they are separated by at least one blank.

The PART_OF_SPEECH_TYPE that you are most interested in are (X, N, ADJ, ADV, V). X is always a valid entry. It stands for none, or all, or unknown. 0 has the same function for numeric types.

The others in the type (PRON, PACK, VPAR, SUPINE, PREP, CONJ, INTERJ, NUM, TACKON, PREFIX, SUFFIX) are either less interesting or artificial, used only internally to the code.

A noun or a verb has a DECN_RECORD consisting of two small integers. The first is the declension/conjugation, and the second is a variant within that.

N 1 1 is the conventional first declension. But there are variants (6, 7, 8) which model Greek-line declensions. (Greek-like variant start at 6);

N 2 1 is the regular -us, -i second declension.

N 2 2 is the regular -um, -i neuter form.

There is a N 2 3 for 'r' forms like puer, pueri. In this case there is the possibility of a difference in stems (ager, agri has stems coded as ager, agr).

Again there are Greek-like variants (6, 7, 8, 9).

N 3 1 is regular third declension (lex, legis - lex, leg) for masculine and feminine.

N 3 2 is for neuter (iter, itineris - iter, itiner).

Variants 3 and 4 are for I-stems. And so it goes.

Each noun has a GENDER_TYPE (X, M, F, N, C). X for unknown (something I avoid for gender - guess if you have to) or all genders (useful in the code but not in a dictionary), and C for common (M + F).

There is also a

    NOUN_KIND_TYPE (X,            --  unknown, nondescript
                    N,            --  proper Name
                    L,            --  Locale, country, city
                    W,            --  a place Where
                    P,            --  a Person type
                    T)            --  a Thing

which you probably do not care about either. Most entries will all be Thing.

Other codes are enumerated in the body of this document.

Verbs are done likewise, but there are four stems, as described below. An example is

    am  am  amav  amat
    V 1 1 X    X X X A O
    love;

Now comes the hard part. When starting from a dictionary one has all the information to decide the values. Just having a single instance of the word lacks a lot. Consider some examples from a user.

Elytris is surely from the Greek for sheath. The question is how Latinized did it get. I suspect that by the 17th century it was completely Latinized. Even in classical times there was very little left in the way of Greek forms ( elythris (or -es), elythris (N 3 3) but it could be a Greek-like form (N 3 9). I do not even know what case I started with, if NOM, then it must be -is, -is, if GEN then -es, -is is reasonable. Then again, if it is DAT P we might have a N 1 1.

All this seems very uncertain, and, in the absence of a real dictionary entry, it is. However you can make the choices such that the result (the output of the code) matches exactly what you have. If you have more information, lots of examples, the uncertainty shrinks. If you have just a single isolated example, there are limits. (But if you do 100 and have more information about some, you can make better guesses about the rest.)

Next we need a gender. It may not make much difference (if M or F, or C) in this case, but sometimes it matters. You might be able to figure that out from the text.

It is a thing (T), but X will work for your purposes. For the rest, X X X X X works fine.

So we have

    elythris   elythr
    N   3 3  F T       X X X X X
    elytra, wing cover of beetles

sat, I happen to know is an abbreviated form of satis, so it is easy. If you want the adverb form, as you indicate:

    Sat
    ADV POS     X X X X X
    sufficiently, adequately; quite, well enough; fairly, (moderately)

Adverbs have a comparison parameter (X, POS, COMP, SUPER). Most will be POS.

It also is an indeclinable (N 9 9) substantive:

    sat
    N 9 9 N T     X X X X X
    enough, sufficient; enough and some to spare; one of sufficient power

Deplanata seems to be a 1-2 declension adjective, the -us, -a, -um form. It also seems to derived from the verb deplanto (V 1 1) - break off/sever (branch/shoot).

    deplanat   deplanat
    ADJ 1 1 POS     X X X X X
    broken off/severed (branch/shoot); (flattened)

Adjectives have a DECN and a comparison.

The following were not at the time in the dictionary, but were in the OLD.

    alat  alat
    ADJ 1 1 POS     X X X X X
    winged, having wings; having a broad/expanded margin

    (punct - ul - at  -> hole/prick/puncture - small - having)

    punctulat   punctulat
    ADJ 1 1 POS    X X X X X
    punctured; having small holes/pricks/stabs/punctures

    appendiculat   appendiculat
    ADJ 1 1 POS    X X X X X
    appendiculate; having/fringed by small appendages/bodies

    acetabul   acetabul
    N 2 2 N T     X X X X X
    small cup (vinegar), 1/8 pint; cupped part (plant); sucker; socket, (cavity)

    ruf  ruf
    ADJ   1 1 POS     X X X X X
    red (various); tawny; red-haired (persons); strong yellow/moderate orange

    testace   testace
    ADJ  1 1 POS    X X X X X
    bricks; resembling bricks (esp. color); having hard covering/shell (animals)

This one had no classical correspondence.

    brunne   brunne
    ADJ 1 1  POS     X X X X X
    brown

There is one other remark. It is probably wise to include in the definition a more complete English meaning. Just saying the meaning of appendiculatus is appendiculate is not as interesting as it might be.

All the inflections are in a file called INFLECTS.LAT now a part of the general distribution of source code and data files.

Here is a quick reference for the most common types.

    --  All first declension nouns  - N 1 1
    --  Ex: aqua aquae  =>  aqu aqu

    --  Second declension nouns in "us"  - N 2 1
    --  Ex: amicus amici  =>  amic amic

    --  Second declension neuter nouns - N 2 2
    --  Ex: verbum verbi  =>  verb verb

    --  Second declension nouns in "er" whether of not the "er" in base - N 2 3
    --  Ex; puer pueri  =>  puer puer
    --  Ex: ager agri   =>  ager agr

    --  Early (BC) 2nd declension nouns in ius/ium (not filius-like)  - N 2 4
    --  for the most part formed GEN S in 'i', not 'ii'   --  G+L 33 R 1
    --  Dictionaries often show as ...(i)i
    --  N 2 4 uses GENDER discrimination to reduce to single VAR
    --  Ex: radius rad(i)i  => radi radi        M
    --  Ex: atrium atr(i)i  =>  atri atri       N

    --  Third declension M or F nouns whose stems end in a consonant - N 3 1
    --  Ex: miles militis  =>  miles milit
    --  Ex: lex legis  =>  lex leg
    --  Ex: frater fratris  =>  frater fratr
    --  Ex: soror sororis  =>  soror soror
    --  All third declension that have the endings -udo, -io, -tas, -x
    --  Ex: pulcritudo pulcritudinis  =>  plucritudo pulcritudin
    --  Ex: legio legionis  =>  legio legion
    --  Ex: varietas varietatis  =>  varietas varietat
    --  Ex: radix radicis  =>  radix  radic

    --  Third declension  N nouns with stems ending in a consonant - N 3 2
    --  Ex: nomen nomenis  =>  nomen nomen
    --  Ex: iter itineris =>  iter itiner
    --  Ex: tempus temporis  =>  tempus  tempor

    --  Third declension nouns  I-stems (M + F)     - N 3 3
    --  Ex: hostis hostis  =>  hostis host
    --  Ex: finis finis  =>  finis fin
    --  Consonant i-stems
    --  Ex: urbs urbis  =>  urbs urb
    --  Ex: mons montis  =>  mons mont
    --  Also use this for present participles (-ns) used as substantives in M + F

    --  Third declension nouns  I-stems (N)    - N 3 4
    --  Ex: mare amris  =>  mare mar                       --  ending in "e"
    --  Ex: animal animalis  =>  animal animal             --  ending in "al"
    --  Ex: exemplar exemplaris  =>  exemplar exemplar     --  ending in "ar"
    --  Also use this for present participles (-ns) used as substantives in N

    --  Fourth declension nouns M + F in "us"  - N 4 1
    --  Ex: passus passus  =>  pass pass
    --  Ex: manus manus  =>  man man

    --  Fourth declension nouns N in "u"  - N 4 2
    --  Ex: genu genus  =>  gen gen
    --  Ex: cornu cornus  =>  corn corn

    --  All fifth declension nouns  - N 5 1
    --  Ex: dies diei  =>  di di
    --  Ex: res rei  =>  r r

    --  Adjectives will mostly only be POS and have only the first two stems
    --  ADJ X have four stems, zzz stands for any unknown/non-existent stem

    --  Adjectives of first and second declension (-us in NOM S M)  - ADJ 1 1
    --  Two stems for POS, third is for COMP, fourth for SUPER
    --  Ex: malus mala malum  => mal mal pei pessi
    --  Ex: altus alta altum  => alt alt alti altissi

    --  Adjectives of first and second declension (-er) - ADJ 1 2
    --  Ex: miser misera miserum  =>  miser miser miseri miserri
    --  Ex: sacer sacra sacrum  =>  sacer sacr zzz  sacerri     --  no COMP
    --  Ex: pulcher pulchri  =>  pulcher pulchr pulchri pulcherri

    --  Adjectives of third declension - one ending  - ADJ 3 1
    --  Ex: audax (gen) audacis  =>  audax audac audaci audacissi
    --  Ex: prudens prudentis  =>  prudens prudent prudenti prudentissi

    --  Adjectives of third declension - two endings   - ADJ 3 2
    --  Ex: brevis breve  =>  brev brev brevi brevissi
    --  Ex: facil facil   =>  facil facil facili facilli

    --  Adjectives of third declension - three endings  - ADJ 3 3
    --  Ex: celer celeris  celere  =>  celer celer celeri celerri
    --  Ex: acer acris acre  =>  acer acr acri acerri

    --  Verbs are mostly TRANS or INTRANS, but X works fine
    --  Depondent verbs must have DEP
    --  Verbs have four stems
    --  The first stem is the first principal part (dictionary entry) - less 'o'
    --  For 2nd decl, the 'e' is omitted, for 3rd decl i-stem, the 'i' is included
    --  Third principal part always ends in 'i', this is omitted in stem
    --  Fourth part in dictionary ends in -us (or -um), this is omitted
    --  DEP verbs omit (have zzz) the third stem

    --  Verbs of the first conjugation  --  V 1 1
    --  Ex: voco vocare vocavi vocatus  =>  voc voc vocav vocat
    --  Ex: porto portave portavi portatus  =>  port port portav portat

    --  Verbs of the second conjugation   -  V 2 1
    --  The characteristic 'e' is in the inflection, not carried in the stem
    --  Ex:  moneo monere monui monitum  =>  mon mon monu monit
    --  Ex:  habeo habere habui habitus  =>  hab hab habu habit
    --  Ex:  deleo delere delevi deletus  =>  del del delev delet
    --  Ex:  iubeo iubere iussi iussus  =>   iub iub iuss iuss
    --  Ex:  video videre vidi visus  =>  vid vid vid vis

    --  Verbs of the third conjugation, variant 1  - V 3 1
    --  Ex: rego regere rexi rectum  =>  reg reg rex rect
    --  Ex: pono ponere posui positus  =>  pon pon posu posit
    --  Ex: capio capere cepi captus  => capi cap cep capt   --  I-stem too w/KEY

    --  Verbs of the fourth conjugation are coded as a variant of third - V 3 4
    --  Ex: audio audire audivi auditus  =>  audi aud audiv audit

    --  Verbs like to be - coded as V 5 1
    --  Ex: sum esse fui futurus  =>  s . fu fut
    --  Ex: adsum adesse adfui adfuturus  =>  ads ad adfu adfut

#### UNIQUES.LAT

There are a few Latin words that cannot be represented with the scheme of stems and endings used by the program. For these very few cases, the program invokes a unique procedure. The file UNIQUES. contains a list of such words and is read in at the loading of the program. This is a simple ASCII/DOS text file which the user can augment. It is expected that there will be very few occasions to do so, indeed, the tendency has been that better processing has allowed uniques to be removed. If a user finds an important word that should be included, please communicate that to the author.

The UNIQUES record is essentially the form as one might have it in output if the word was processed normally. In addition there are some additional fields that the program presently expects. While these could be eliminated, it is convenient for the program not to make the UNIQUES a special case. So a noun form

    N 3 1 ACC S F T

is followed by two zeros and an X

    N 3 1 ACC S F T  0 0                            X        X  X  X  B  O

and then the five X's or, more properly, the dictionary codes.

    N 3 1 ACC S F T  0 0                            X        X  X  X  B  O

These pro forma codes are absolutely necessary, but have no further impact.

The program is written in Ada and uses Ada techniques. Ada is designed for high reliability systems (there is no claim the WORDS was developed with all the other safeguards that that implies!) as a consequence is unforgiving. The exact form is required. If you want to be sloppy you have to deliberately program that in.

The following examples, and an examination of the UNIQUES.LAT file, should allow the user to insert any unique necessary.

    requiem
    N 3 1 ACC S F T  0 0                            X        X  X  X  B  O
    rest (from labor), respite; intermission, pause, break; amusement, hobby;
    bobus
    N 3 1 DAT P C T  0 0                            X        X  X  X  C  X
    ox, bull; cow; cattle (pl.)
    quicquid
    PRON 1 6 NOM S N INDEF   0 0                    X        X  X  X  B  X
    whatever, whatsoever; everything which; each one; each; everything; anything
    mavis
    V     6 2 PRES  ACTIVE  IND  2 S X 0 0          X        X  X  X  B  X
    prefer
    cette
    V    3 1 PRES ACTIVE IMP  2 P TRANS    0 0      X        X  X  X  B  O
    give/bring here!/hand over, come (now/here); tell/show us, out with it! behold!

###
DEVELOPERS AND REHOSTING

#### Program source code and data

The program is written in Ada, and is machine independent. Ada source code is available for compiling onto other machines.

#### Licence

All parts of the WORDS system, source code and data files, are made freely available to anyone who wishes to use them, for whatever purpose.

#### Rehosting WORDS

There is a wordsall.zip zip of all the Ada source files to port WORDS, and support programs and data to generate the necessary dictionaries and inflections for re-hosting the WORDS Latin dictionary parsing/translation system on any machine with an Ada 95 compiler. (It can be made to work with Ada 83 also by replacing just tha short driver routine.)

This a console program (keyboard entry), without fancy Windows GUI, and has thereby been made system independent.

wordsall contains the Ada source files for WORDS, and complete details for rehosting summarized below:

Ada source files for the WORDS system are:

    strings_package.ads
    strings_package.adb
    latin_file_names.ads
    latin_file_names.adb
    config.ads
    preface.ads
    word_parameters.ads
    developer_parameters.ads
    preface.adb
    put_stat.adb
    word_parameters.adb
    inflections_package.adb
    inflections_package.ads
    dictionary_package.ads
    dictionary_package.adb
    addons_package.ads
    addons_package.adb
    uniques_package.ads
    word_support_package.ads
    word_support_package.adb
    english_support package.ads
    english_support package.adb
    word_package.ads
    line_stuff.ads
    line_stuff.adb
    developer_parameters.adb
    tricks_package.ads
    word_package.adb
    tricks_package.adb
    list_package.ads
    list_sweep.adb
    dictionary_form.adb
    search_english.adb
    put_example_line.adb
    list_package.adb
    parse.adb
    words.adb

There are four supporting programs

    makedict.adb
    makestem.adb
    makeinfl.adb
    makeefil.adb

and DOS ASCII data files for them to act upon to produce WORDS data files

    DICTLINE.GEN
    STEMLIST.GEN
    EWDSLIST.GEN
    INFLECTS.LAT

and other WORDS DOS ASCII supporting files

    ADDONS.LAT
    UNIQUES.LAT

The process is to download the 197fall.zip and unzip into a subdirectory. (If the zip form is unsuitable for your system, I can provide the files in an uncompressed form.) The wordy file names are for compliance with the restrictions of the GNAT system. They may be renamed, and I can provide an alternative. However, the long file names demand an UNZIP that preserves them, if GNAT is to be used.

For example, in a GNAT environment (-O3 optimizes if your system supports it):

    gnatmake -O3 words
    gnatmake makedict
    gnatmake makestem
    gnatmake ewdsefil
    gnatmake makeinfl

This produces executables for WORDS, MAKEDICT, MAKESTEM, MAKEEFIL, and MAKEINFL. Executing the latter four against the input respectively of

    DICTLINE.GEN
    STEMLIST.GEN
    EWDSLIST.GEN
    INFLECTS.LAT

(when they ask for DICTIONARY say G) producing

    DICTFILE.GEN
    STEMFILE.GEN
    INDXFILE.GEN
    EWDSFILE.GEN
    INFLECTS.SEC

Along with ADDONS.LAT and UNIQUES.LAT, this is the set of data for WORDS.

The only problem that has appeared on porting so far is that one must be careful of file names. Problems sometimes turn up but have been easily rectified by inspection. All of my systems are case-independent on file names. If one is running in a case-dependent system (UNIX), this is a point to check. Note that the data files are capitalized, source files are not.

The source is in Ada and therefore very readable, which is not claimed for the logic which is my. not Ada's, fault. The source and data are freely available for anyone to use for any purpose. It may be converted to other languages, used in pieces, or modified in any way without further permission or notification.

There is one oddity that the reader may remark upon. The code is loaded with PUT/print statements which are now commented out. These were used at some time for debug purposes and were just left in. They (mostly) are left justified and may fairly easily be removed for a cleaner presentation. Further there are many blocks of code which during development have been moved or removed, but have in their previous place been left commented. This is also messy. I cannot really justify not having fixed this, but there it is.

#### Feedback

Feedback is invited. If there is a problem in installing or operating, in the results or their display, or if your favorite word is omitted from the dictionary, please let me know.

All comments are appreciated. Check back for new version releases at
http://www.erols.com/whitaker/words.htm

Contact e-mail whitaker@erols.com,

or William Whitaker, PO Box 51225 Midland TX 79710 USA.