This is unuran.info, produced by makeinfo version 4.13 from unuran.texi.

INFO-DIR-SECTION Scientific software
START-INFO-DIR-ENTRY
* unuran: (unuran).  UNU.RAN - Universal Non-Uniform Random number generator
END-INFO-DIR-ENTRY

Copyright (C) 2000-2007 Institut fuer Statistik, WU Wien.

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.


File: unuran.info,  Node: Top,  Up: (dir)

UNU.RAN - Universal Non-Uniform RANdom number generators
********************************************************

* Menu:

* Intro:: Introduction
* Examples:: Examples
* StringAPI:: String Interface
* Distribution_objects:: Handling distribution objects
* Methods:: Methods for generating non-uniform random variates
* URNG:: Using uniform random number generators
* Stddist:: UNU.RAN Library of standard distributions
* Error_Debug:: Error handling and Debugging
* Testing:: Testing
* Misc:: Miscelleanous
* RVG:: A Short Introduction to Random Variate Generation
* Glossary:: Glossary
* Bibliography:: Bibliography
* FIndex:: Function Index

This is the online-documentation of UNU.RAN.
Version: 1.8.1
Date: 19 April 2011

   UNU.RAN (Universal Non-Uniform RAndom Number generator) is a
collection of algorithms for generating non-uniform pseudorandom
variates as a library of C functions designed and implemented by the
ARVAG (Automatic Random VAriate Generation) project group in Vienna, and
released under the GNU Public License (GPL).  It is especially designed
for such situations where

   - a non-standard distribution or a truncated distribution is needed.

   - experiments with different types of distributions are made.

   - random variates for variance reduction techniques are used.

   - fast generators of predictable quality are necessary.


   Of course it is also well suited for standard distributions.
However due to its more sophisticated programming interface it might
not be as easy to use if you only look for a generator for the standard
normal distribution. (Although UNU.RAN provides generators that are
superior in many aspects to those found in quite a number of other
libraries.)

   UNU.RAN implements several methods for generating random numbers.
The choice depends primary on the information about the distribution
can be provided and - if the user is familar with the different methods
- on the preferences of the user.

   The design goals of UNU.RAN are to provide _reliable_, _portable_
and _robust_ (as far as this is possible) functions with a consisent
and easy to use interface. It is suitable for all situation where
experiments with different distributions including non-standard
distributions.  For example it is no problem to replace the normal
distribution by an empirical distribution in a model.

   Since originally designed as a library for so called black-box or
universal algorithms its interface is different from other libraries.
(Nevertheless it also contains special generators for standard
distributions.) It does not provide subroutines for random variate
generation for particular distributions. Instead it uses an
object-oriented interface. Distributions and generators are treated as
independent objects. This approach allows one not only to have
different methods for generating non-uniform random variates. It is
also possible to choose the method which is optimal for a given
situation (e.g. speed, quality of random numbers, using for variance
reduction techniques, etc.). It also allows to sample from non-standard
distribution or even from distributions that arise in a model and can
only be computed in a complicated subroutine.

   Sampling from a particular distribution requires the following steps:

  1. Create a distribution object.  (Objects for standard distributions
     are available in the library)

  2. Choose a method.

  3. Initialize the generator, i.e., create the generator object.  If
     the choosen method is not suitable for the given distribution (or
     if the distribution object contains too little information about
     the distribution) the initialization routine fails and produces an
     error message. Thus the generator object does (probably) not
     produce false results (random variates of a different
     distribution).

  4. Use this generator object to sample from the distribution.


   There are four types of objects that can be manipulated
independently:

   * *Distribution objects:* hold all information about the random
     variates that should be generated. The following types of
     distributions are available:

        - Continuous and Discrete distributions

        - Empirical distributions

        - Multivariate distributions

     Of course a library of standard distributions is included (and
     these can be further modified to get, e.g., truncated
     distributions). Moreover the library provides subroutines to build
     almost arbitrary distributions.

   * *Generator objects:* hold the generators for the given
     distributions. It is possible to build independent generator
     objects for the same distribution object which might use the same
     or different methods for generation. (If the choosen method is not
     suitable for the given method, a `NULL' pointer is returned in the
     initialization step).

   * *Parameter objects:* Each transformation method requires several
     parameters to adjust the generator to a given distribution. The
     parameter object holds all this information. When created it
     contains all necessary default settings. It is only used to create
     a generator object and destroyed immediately. Altough there is no
     need to change these parameters or even know about their existence
     for "usual distributions", they allow a fine tuning of the
     generator to work with distributions with some awkward properties.
     The library provides all necessary functions to change these
     default parameters.

   * *Uniform Random Number Generators:* All generator objects need one
     (or more) streams of uniform random numbers that are transformed
     into random variates of the given distribution. These are given as
     pointers to appropriate functions or structures (objects). Two
     generator objects may have their own uniform random number
     generators or share a common one. Any functions that produce
     uniform (pseudo-) random numbers can be used. We suggest Otmar
     Lendl's PRNG library.



File: unuran.info,  Node: Intro,  Next: Examples,  Prev: Top,  Up: Top

1 Introduction
**************

* Menu:

* UsageDoc:: Usage of this document
* Installation:: Installation
* UsageLib:: Using the library
* Concepts:: Concepts of UNU.RAN
* Contact:: Contact the authors


File: unuran.info,  Node: UsageDoc,  Next: Installation,  Up: Intro

1.1 Usage of this document
==========================

We designed this document in a way such that one can use UNU.RAN with
reading as little as necessary.  Read *note Installation:: for the
instructions to install the library.  *note Concepts of UNU.RAN:
Concepts, discribes the basics of UNU.RAN.  It also has a short
guideline for choosing an appropriate method.  In *note Examples::
examples are given that can be copied and modified.  They also can be
found in the directory `examples' in the source tree.

   Further information are given in consecutive chapters.  *note
Handling distribution objects: Distribution_objects, describes how to
create and manipulate distribution objects.  *note standard
distributions: Stddist, describes predefined distribution objects that
are ready to use.  *note Methods:: describes the various methods in
detail.  For each of possible distribution classes (continuous,
discrete, empirical, multivariate) there exists a short overview
section that can be used to choose an appropriate method followed by
sections that describe each of the particular methods in detail.  These
are merely for users with some knowledge about the methods who want to
change method-specific parameters and can be ignored by others.

   Abbreviations and explanation of some basic terms can be found in
*note Glossary::.


File: unuran.info,  Node: Installation,  Next: UsageLib,  Prev: UsageDoc,  Up: Intro

1.2 Installation
================

UNU.RAN was developed on an Intel architecture under Linux with the GNU
C compiler but should compile and run on any computing environment. It
requires an ANSI compliant C compiler.

   Below find the installation instructions for unices.

Uniform random number generator
...............................

UNU.RAN can be used with any uniform random number generator but (at the
moment) some features work best with Pierre L'Ecuyer's RngStreams
library (see `http://statmath.wu.ac.at/software/RngStreams/' for a
description and downloading.  For details on using uniform random
number in UNU.RAN see *note Using uniform random number generators:
URNG.

   Install the required libraries first.

UNU.RAN
.......

  1. First unzip and untar the package and change to the directory:
          tar zxvf unuran-1.8.1.tar.gz
          cd unuran-1.8.1

  2. Optional: Edit the file `src/unuran_config.h'

  3. Run a configuration script:
          sh ./configure --prefix=<prefix>

     where `<prefix>' is the root of the installation tree.  When
     omitted `/usr/local' is used.

     Use `./configure --help' to get a list of other options.  In
     particular the following flags are important:

        * Enable support for some external sources of uniform random
          number generators (*note Using uniform random number
          generators: URNG.):

         `--with-urng-rngstream'
               URNG: use Pierre L'Ecuyer's RNGSTREAM library
               [default=`no']

         `--with-urng-prng'
               URNG: use Otmar Lendl's PRNG library [default=`no']

         `--with-urng-gsl'
               URNG: use random number generators from GNU Scientific
               Library [default=`no']

         `--with-urng-default'
               URNG: global default URNG (builtin|rngstream)
               [default=`builtin']

          We strongly recommend to use RngStreams library:
               sh ./configure --with-urng-rngstream --with-urng-default=rngstream

          _Important:_ You must install the respective libraries
          `RngStreams', `PRNG' and `GSL' before `./configure' is
          executed.

        * Also make a shared library:

         `--enable-shared'
               build shared libraries  [default=`no']

        * The library provides the function `unur_gen_info' for
          information about generator objects. This is intented for
          using in interactive computing environments.  This feature
          can be enabled / disabled by means of the configure flag

         `--enable-info'
               INFO: provide function with information about generator
               objects [default=`yes']

        * Enable support for deprecated UNU.RAN routines if you have
          some problems with older application after upgrading the
          library:

         `--enable-deprecated'
               enable support for deprecated UNU.RAN routines
               [default=`no']

        * Enable debugging tools:

         `--enable-check-struct'
               Debug: check validity of pointers to structures
               [default=`no']

         `--enable-logging'
               Debug: print informations about generator into logfile
               [default=no]

  4. Compile and install the libray:
          make
          make install

     Obviously `$(prefix)/include' and `$(prefix)/lib' must be in the
     search path of your compiler. You can use environment variables to
     add these directories to the search path. If you are using the
     bash type (or add to your profile):
          export LIBRARY_PATH="<prefix>/lib"
          export C_INCLURE_PATH="<prefix>/include"

     If you want to make a shared library, then making such a library
     can be enabled using
          sh ./configure --enable-shared
     If you want to link against the shared library make sure that it
     can be found when executing the binary that links to the library.
     If it is not installed in the usual path, then the easiest way is
     to set the `LD_LIBRARY_PATH' environment variable. See any
     operating system documentation about shared libraries for more
     information, such as the ld(1) and ld.so(8) manual pages.

  5. Documentation in various formats (PDF, HTML, info, plain text) can
     be found in directory `doc'.

  6. You can run some tests by
          make check

     However, some of these tests requires the usage of the PRNG or
     RngStreams library and are only executed if these are installed
     enabled by the corresponding configure flag.

     An extended set of tests is run by
          make fullcheck

     However some of these might fail occasionally due to roundoff
     errors or the mysteries of floating point arithmetic, since we
     have used some extreme settings to test the library.


Upgrading
.........

   - _Important:_

     UNU.RAN now relies on some aspects of IEEE 754 compliant floating
     point arithmetic. In particular, `1./0.' and `0./0.' must result
     in `infinity' and `NaN' (not a number), respectively, and must not
     cause a floating point exception.  For allmost all modern compting
     architecture this is implemented in hardware. For others there
     should be a special compiler flag to get this feature (e.g.,
     `-MIEEE' on DEC alpha or `-mp' for the Intel C complier).

   - Upgrading UNU.RAN from version 0.9.x or earlier:

     With UNU.RAN version 1.0.x some of the macro definitions in file
     `src/unuran_config.h' are moved into file `config.h' and are
     set/controlled by the `./configure' script.

     Writting logging information into the logfile must now be enabled
     when running the configure script:
          sh ./configure --enable-logging

   - Upgrading UNU.RAN from version 0.7.x or earlier:

     With UNU.RAN version 0.8.0 the interface for changing underlying
     distributions and running a reinitialization routine has been
     simplified. The old routines can be compiled into the library
     using the following configure flag:
          sh ./configure --enable-deprecated

     Notice: Using these deprecated routines is not supported any more
     and this strong discouraged.

     Wrapper functions for external sources of uniform random numbers
     are now enabled by configure flags and not by macros defined in
     file `src/unuran_config.h'.

     The file `src/unuran_config.h' is not installed any more. It is
     now only included when the library is compiled.  It should be
     removed from the global include path of the compiler.



File: unuran.info,  Node: UsageLib,  Next: Concepts,  Prev: Installation,  Up: Intro

1.3 Using the library
=====================

ANSI C Compliance
.................

The library is written in ANSI C and is intended to conform to the ANSI
C standard.  It should be portable to any system with a working ANSI C
compiler.

   The library does not rely on any non-ANSI extensions in the
interface it exports to the user.  Programs you write using UNU.RAN can
be ANSI compliant.  Extensions which can be used in a way compatible
with pure ANSI C are supported, however, via conditional
compilation.	 This allows the library to take advantage of compiler
extensions on those platforms which support them.

   To avoid namespace conflicts all exported function names and
variables have the prefix `unur_', while exported macros have the
prefix `UNUR_'.

Compiling and Linking
.....................

If you want to use the library you must include the UNU.RAN header file
     #include <unuran.h>
   If you also need the test routines then also add
     #include <unuran_tests.h>
   If wrapper functions for external sources of uniform random number
generators are used, the corresponding header files must also be
included, e.g.,
     #include <unuran_urng_rngstream.h>

If these header files are not installed on the standard search path of
your compiler you will also need to provide its location to the
preprocessor as a command line flag.	 The default location of the
`unuran.h' is `/usr/local/include'.  A typical compilation command for
a source file `app.c' with the GNU C compiler `gcc' is,

     gcc -I/usr/local/include -c app.c

This results in an object file `app.o'.	 The default include path for
`gcc' searches `/usr/local/include' automatically so the `-I' option
can be omitted when UNU.RAN is installed in its default location.

   The library is installed as a single file, `libunuran.a'.  A shared
version of the library is also installed on systems that support shared
libraries.  The default location of these files is `/usr/local/lib'.
To link against the library you need to specify the main library.  The
following example shows how to link an application with the library
(and the the RNGSTREAMS library if you decide to use this source of
uniform pseudo-random numbers),

     gcc app.o -lunuran -lrngstreams -lm

Shared Libraries
................

To run a program linked with the shared version of the library it may
be necessary to define the shell variable `LD_LIBRARY_PATH' to include
the directory where the library is installed.  For example,

     LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
   To compile a statically linked version of the program instead, use
the `-static' flag in `gcc',

     gcc -static app.o -lunuran -lrngstreams -lm

Compatibility with C++
......................

The library header files automatically define functions to have `extern
"C"' linkage when included in C++ programs.


File: unuran.info,  Node: Concepts,  Next: Contact,  Prev: UsageLib,  Up: Intro

1.4 Concepts of UNU.RAN
=======================

UNU.RAN is a C library for generating non-uniformly distributed random
variates. Its emphasis is on the generation of non-standard
distribution and on streams of random variates of special purposes.  It
is designed to provide a consistent tool to sample from distributions
with various properties.  Since there is no universal method that fits
for all situations, various methods for sampling are implemented.

   UNU.RAN solves this complex task by means of an object oriented
programming interface. Three basic objects are used:

   * distribution object `UNUR_DISTR'
     Hold all information about the random variates that should be
     generated.

   * generator object `UNUR_GEN'
     Hold the generators for the given distributions.  Two generator
     objects are completely independent of each other.  They may share
     a common uniform random number generator or have their owns.

   * parameter object `UNUR_PAR'
     Hold all information for creating a generator object. It is
     necessary due to various parameters and switches for each of these
     generation methods.

     Notice that the parameter objects only hold pointers to arrays but
     do not have their own copy of such an array.  Especially, if a
     dynamically allocated array is used it _must not_ be freed until
     the generator object has been created!


   The idea behind these structures is that creatin distributions,
choosing a generation method and draing samples are orthogonal (ie.
independent) functions of the library.  The parameter object is only
introduced due to the necessity to deal with various parameters and
switches for each of these generation methods which are required to
adjust the algorithms to unusual distributions with extreme properties
but have default values that are suitable for most applications.  These
parameters and the data for distributions are set by various functions.

   Once a generator object has been created sampling (from the
univariate continuous distribution) can be done by the following
command:
     double x = unur_sample_cont(generator);
   Analogous commands exist for discrete and multivariate distributions.
For detailed examples that can be copied and modified see *note
Examples::.

Distribution objects
--------------------

All information about a distribution are stored in objects (structures)
of type `UNUR_DISTR'.  UNU.RAN has five different types of distribution
objects:

`cont'
     Continuous univariate distributions.

`cvec'
     Continuous multivariate distributions.

`discr'
     Discrete univariate distributions.

`cemp'
     Continuous empirical univariate distribution, ie. given by a
     sample.

`cvemp'
     Continuous empirical multivariate distribution, ie. given by a
     sample.

`matr'
     Matrix distributions.


Distribution objects can be created from scratch by the following call
     distr = unur_distr_<type>_new();
   where `<type>' is one of the five possible types from the above
table.  Notice that these commands only create an _empty_ object which
still must be filled by means of calls for each type of distribution
object (*note Handling distribution objects: Distribution_objects.).
The naming scheme of these functions is designed to indicate the
corresponding type of the distribution object and the task to be
performed. It is demonstated on the following example.
     unur_distr_cont_set_pdf(distr, mypdf);
   This command stores a PDF named `mypdf' in the distribution object
`distr' which must have the type `cont'.

   Of course UNU.RAN provides an easier way to use standard
distributions.  Instead of using `unur_distr_<type>_new' calls and
fuctions `unur_distr_<type>_set_<...>' for setting data, objects for
standard distribution can be created by a single call.  Eg. to get an
object for the normal distribution with mean 2 and standard deviation 5
use
     double parameter[2] = {2.0 ,5.0};
     UNUR_DISTR *distr = unur_distr_normal(parameter, 2);
   For a list of standard distributions see *note Standard
distributions: Stddist.

Generation methods
------------------

The information that a distribution object must contain depends heavily
on the chosen generation method choosen.

   Brackets indicate optional information while a tilde indicates that
only an approximation must be provided.  See *note Glossary::, for
unfamiliar terms.


Methods for continuous univariate distributions
sample with `unur_sample_cont'

method   PDF   dPDF   CDF   mode   area   other
AROU     x     x            [x]           T-concave
HINV     [x]   [x]    x                   
HRB                                       bounded hazard rate
HRD                                       decreasing hazard rate
HRI                                       increasing hazard rate
ITDR     x     x            x             monotone with pole
NINV     [x]          x                   
NROU     x                  [x]           
SROU     x                  x      x      T-concave
SSR      x                  x      x      T-concave
TABL     x                  x      [~]    all local extrema
TDR      x     x                          T-concave
TDRGW    x     x                          T-concave
UTDR     x                  x      ~      T-concave
CSTD                                      build-in standard distribution
CEXT                                      wrapper for external generator


Methods for continuous empirical univariate distributions
sample with `unur_sample_cont'

EMPK:  Requires an observed sample.
EMPL:  Requires an observed sample.


Methods for continuous multivariate distributions
sample with `unur_sample_vec'

NORTA: Requires rank correlation matrix and marginal distributions.
VNROU: Requires the PDF.
MVSTD: Generator for built-in standard distributions.
MVTDR: Requires PDF and gradiant of PDF.


Methods for continuous empirical multivariate distributions
sample with `unur_sample_vec'

VEMPK: Requires an observed sample.


Methods for discrete univariate distributions
sample with `unur_sample_discr'

method   PMF   PV   mode   sum    other
DARI     x          x      ~      T-concave
DAU      [x]   x                  
DGT      [x]   x                  
DSROU    x          x      x      T-concave
DSS      [x]   x           x      
DSTD                              build-in standard distribution
CEXT                              wrapper for external generator


Methods for matrix distributions
sample with `unur_sample_matr'

MCORR: Distribution object for random correlation matrix.


Markov Chain Methods for continuous multivariate distributions
sample with `unur_sample_vec'

GIBBS: T-concave logPDF and derivatives of logPDF.
HITRO: Requires PDF.



   Because of tremendous variety of possible problems, UNU.RAN provides
many methods. All information for creating a generator object has to be
collected in a parameter object first.  For example, if the task is to
sample from a continuous distribution the method AROU might be a good
choice. Then the call
     UNUR_PAR *par = unur_arou_new(distribution);
   creates an parameter object `par' with a pointer to the distribution
object and default values for all necessary parameters for method AROU.
Other methods can be used by replacing `arou' with the name of the
desired methods (in lower case letters):
     UNUR_PAR *par = unur_<method>_new(distribution);
   This sets the default values for all necessary parameters for the
chosen method. These are suitable for almost all applications.
Nevertheless, it is possible to control the behavior of the method
using corresponding `set' calls for each method.  This might be
necessary to adjust the algorithm for an unusual distribution with
extreme properties, or just for fine tuning the perforence of the
algorithm.  The following example demonstrates how to change the maximum
number of iterations for method NINV to the value 50:
     unur_ninv_set_max_iteration(par, 50);
   All available methods are described in details in *note Methods::.

Creating a generator object
---------------------------

Now it is possible to create a generator object:
     UNUR_GEN *generator = unur_init(par);
     if (generator == `NULL') exit(EXIT_FAILURE);

*Important:* You must always check whether `unur_init' has been
executed successfully. Otherwise the `NULL' pointer is returned which
causes a segmentation fault when used for sampling.

*Important:* The call of `unur_init' *destroys* the parameter object!
Moreover, it is recommended to call `unur_init' immediately after the
parameter object `par' has created and modified.


   An existing generator object is a rather static construct.
Nevertheless, some of the parameters can still be modified by `chg'
calls, e.g.
     unur_ninv_chg_max_iteration(gen, 30);


   Notice that it is important _when_ parameters are changed because
different functions must be used:

   The function name includes the term `set' and the first argument
must be of type `UNUR_PAR' when the parameters are changed _before_ the
generator object is created.

   The function name includes the term `chg' and the first argument
must be of type `UNUR_GEN' when the parameters are changed for an
_existing_ generator object.

   For details see *note Methods::.

Sampling
--------

You can now use your generator object in any place of your program to
sample from your distribution. You only have to take care about the
type of variates it computes: `double', `int' or a vector (array of
`double's).  Notice that at this point it does not matter whether you
are sampling from a gamma distribution, a truncated normal distribution
or even an empirical distribution.

Reinitializing
--------------

It is possible for a generator object to change the parameters and the
domain of the underlying distribution. This must be done by extracting
this object by means of a `unur_get_distr' call and changing the
distribution using the correspondig set calls, see *note Handling
distribution objects: Distribution_objects.  The generator object
*must* then be reinitialized by means of the `unur_reinit' call.

   _Important_: Currently not all methods allow reinitialization, see
the description of the particular method (keyword Reinit).

Destroy
-------

When you do not need your generator object any more, you should destroy
it:
     unur_free(generator);

Uniform random numbers
----------------------

Each generator object can have its own uniform random number generator
or share one with others.  When created a parameter object the pointer
for the uniform random number generator is set to the default
generator. However, it can be changed at any time to any other
generator:
     unur_set_urng(par, urng);
   or
     unur_chg_urng(generator, urng);
   respectively.  See *note Using uniform random number generators:
URNG, for details.


File: unuran.info,  Node: Contact,  Prev: Concepts,  Up: Intro

1.5 Contact the authors
=======================

If you have any problems with UNU.RAN, suggestions how to improve the
library, or find a bug, please contact us via email
<unuran@statmath.wu.ac.at>.

   For news please visit out homepage at
`http://statmath.wu.ac.at/unuran/'.


File: unuran.info,  Node: Examples,  Next: StringAPI,  Prev: Intro,  Up: Top

2 Examples
**********

* Menu:

* Example_0:: As short as possible
* Example_0_str:: As short as possible (String API)
* Example_1:: Select a method
* Example_1_str:: Select a method (String API)
* Example_2:: Arbitrary distributions
* Example_2_str:: Arbitrary distributions (String API)
* Example_3:: Change parameters of the method
* Example_3_str:: Change parameters of the method (String API)
* Example_4:: Change uniform random generator
* Example_anti:: Sample pairs of antithetic random variates
* Example_anti_str:: Sample pairs of antithetic random variates (String API)
* Example_More:: More examples

   The examples in this chapter should compile cleanly and can be found
in the directory `examples' of the source tree of UNU.RAN. Assuming
that UNU.RAN as well as the PRNG libraries have been installed properly
(*note Installation::) each of these can be compiled (using the GCC in
this example) with
     gcc -Wall -O2 -o example example.c -lunuran -lprng -lm
   _Remark:_ `-lprng' must be omitted when the PRNG library is not
installed. Then however some of the examples might not work.

   The library uses three objects: `UNUR_DISTR', `UNUR_PAR' and
`UNUR_GEN'.  It is not important to understand the details of these
objects but it is important not to changed the order of their creation.
The distribution object can be destroyed _after_ the generator object
has been made. (The parameter object is freed automatically by the
`unur_init' call.) It is also important to check the result of the
`unur_init' call. If it has failed the `NULL' pointer is returned and
causes a segmentation fault when used for sampling.

   We give all examples with the UNU.RAN standard API and the more
convenient string API.


File: unuran.info,  Node: Example_0,  Next: Example_0_str,  Up: Examples

2.1 As short as possible
========================

Select a distribution and let UNU.RAN do all necessary steps.

     /* ------------------------------------------------------------- */
     /* File: example0.c                                              */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Use a predefined standard distribution:                     */
       /*   Gaussian with mean zero and standard deviation 1.         */
       /*   Since this is the standard form of the distribution,      */
       /*   we need not give these parameters.                        */
       distr = unur_distr_normal(NULL, 0);

       /* Use method AUTO:                                            */
       /*   Let UNURAN select a suitable method for you.              */
       par = unur_auto_new(distr);

       /* Now you can change some of the default settings for the     */
       /* parameters of the chosen method. We don't do it here.       */

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_0_str,  Next: Example_1,  Prev: Example_0,  Up: Examples

2.2 As short as possible (String API)
=====================================

Select a distribution and let UNU.RAN do all necessary steps.

     /* ------------------------------------------------------------- */
     /* File: example0_str.c                                          */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       /* Use a predefined standard distribution:                     */
       /*   Standard Gaussian distribution.                           */
       /* Use method AUTO:                                            */
       /*   Let UNURAN select a suitable method for you.              */
       gen = unur_str2gen("normal()");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_1,  Next: Example_1_str,  Prev: Example_0_str,  Up: Examples

2.3 Select a method
===================

Select method AROU and use it with default parameters.

     /* ------------------------------------------------------------- */
     /* File: example1.c                                              */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Use a predefined standard distribution:                     */
       /*   Gaussian with mean zero and standard deviation 1.         */
       /*   Since this is the standard form of the distribution,      */
       /*   we need not give these parameters.                        */
       distr = unur_distr_normal(NULL, 0);

       /* Choose a method: AROU.                                      */
       /* For other (suitable) methods replace "arou" with the        */
       /* respective name (in lower case letters).                    */
       par = unur_arou_new(distr);

       /* Now you can change some of the default settings for the     */
       /* parameters of the chosen method. We don't do it here.       */

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_1_str,  Next: Example_2,  Prev: Example_1,  Up: Examples

2.4 Select a method (String API)
================================

Select method AROU and use it with default parameters.

     /* ------------------------------------------------------------- */
     /* File: example1_str.c                                          */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       /* Use a predefined standard distribution:                     */
       /*   Standard Gaussian distribution.                           */
       /* Choose a method: AROU.                                      */
       /*   For other (suitable) methods replace "arou" with the      */
       /*   respective name.                                          */
       gen = unur_str2gen("normal() & method=arou");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_2,  Next: Example_2_str,  Prev: Example_1_str,  Up: Examples

2.5 Arbitrary distributions
===========================

If you want to sample from a non-standard distribution, UNU.RAN might
be exactly what you need.  Depending on the information is available, a
method must be choosen for sampling, see *note Concepts:: for an
overview and *note Methods:: for details.

     /* ------------------------------------------------------------- */
     /* File: example2.c                                              */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* In this example we build a distribution object from scratch   */
     /* and sample from this distribution.                            */
     /*                                                               */
     /* We use method TDR (Transformed Density Rejection) which       */
     /* required a PDF and the derivative of the PDF.                 */

     /* ------------------------------------------------------------- */

     /* Define the PDF and dPDF of our distribution.                  */
     /*                                                               */
     /* Our distribution has the PDF                                  */
     /*                                                               */
     /*          /  1 - x*x  if |x| <= 1                              */
     /*  f(x) = <                                                     */
     /*          \  0        otherwise                                */
     /*                                                               */

     /* The PDF of our distribution:                                  */
     double mypdf( double x, const UNUR_DISTR *distr )
          /* The second argument (`distr') can be used for parameters */
          /* for the PDF. (We do not use parameters in our example.)  */
     {
       if (fabs(x) >= 1.)
         return 0.;
       else
         return (1.-x*x);
     } /* end of mypdf() */

     /* The derivative of the PDF of our distribution:                */
     double mydpdf( double x, const UNUR_DISTR *distr )
     {
       if (fabs(x) >= 1.)
         return 0.;
       else
         return (-2.*x);
     } /* end of mydpdf() */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create a new distribution object from scratch.              */
       /* It is a continuous distribution, and we need a PDF and the  */
       /* derivative of the PDF. Moreover we set the domain.          */

       /* Get empty distribution object for a continuous distribution */
       distr = unur_distr_cont_new();

       /* Assign the PDF and dPDF (defined above).                    */
       unur_distr_cont_set_pdf( distr, mypdf );
       unur_distr_cont_set_dpdf( distr, mydpdf );

       /* Set the domain of the distribution (optional for TDR).      */
       unur_distr_cont_set_domain( distr, -1., 1. );

       /* Choose a method: TDR.                                       */
       par = unur_tdr_new(distr);

       /* Now you can change some of the default settings for the     */
       /* parameters of the chosen method. We don't do it here.       */

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_2_str,  Next: Example_3,  Prev: Example_2,  Up: Examples

2.6 Arbitrary distributions (String API)
========================================

If you want to sample from a non-standard distribution, UNU.RAN might
be exactly what you need.  Depending on the information is available, a
method must be choosen for sampling, see *note Concepts:: for an
overview and *note Methods:: for details.

     /* ------------------------------------------------------------- */
     /* File: example2_str.c                                          */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* In this example we use a generic distribution object          */
     /* and sample from this distribution.                            */
     /*                                                               */
     /* The PDF of our distribution is given by                       */
     /*                                                               */
     /*          /  1 - x*x  if |x| <= 1                              */
     /*  f(x) = <                                                     */
     /*          \  0        otherwise                                */
     /*                                                               */
     /* We use method TDR (Transformed Density Rejection) which       */
     /* required a PDF and the derivative of the PDF.                 */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       /* Use a generic continuous distribution.                      */
       /* Choose a method: TDR.                                       */
       gen = unur_str2gen(
             "distr = cont; pdf=\"1-x*x\"; domain=(-1,1) & method=tdr");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_3,  Next: Example_3_str,  Prev: Example_2_str,  Up: Examples

2.7 Change parameters of the method
===================================

Each method for generating random numbers allows several parameters to
be modified. If you do not want to use default values, it is possible
to change them.  The following example illustrates how to change
parameters.  For details see *note Methods::.

     /* ------------------------------------------------------------- */
     /* File: example3.c                                              */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double x;          /* will hold the random number              */

       double fparams[2]; /* array for parameters for distribution    */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Use a predefined standard distribution:                     */
       /*   Gaussian with mean 2. and standard deviation 0.5.         */
       fparams[0] = 2.;
       fparams[1] = 0.5;
       distr = unur_distr_normal( fparams, 2 );

       /* Choose a method: TDR.                                       */
       par = unur_tdr_new(distr);

       /* Change some of the default parameters.                      */

       /* We want to use T(x)=log(x) for the transformation.          */
       unur_tdr_set_c( par, 0. );

       /* We want to have the variant with immediate acceptance.      */
       unur_tdr_set_variant_ia( par );

       /* We want to use 10 construction points for the setup         */
       unur_tdr_set_cpoints ( par, 10, NULL );

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* It is possible with method TDR to truncate the distribution */
       /* for an existing generator object ...                        */
       unur_tdr_chg_truncated( gen, -1., 0. );

       /* ... and sample again.                                       */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_3_str,  Next: Example_4,  Prev: Example_3,  Up: Examples

2.8 Change parameters of the method (String API)
================================================

Each method for generating random numbers allows several parameters to
be modified. If you do not want to use default values, it is possible
to change them.  The following example illustrates how to change
parameters.  For details see *note Methods::.

     /* ------------------------------------------------------------- */
     /* File: example3_str.c                                              */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double x;          /* will hold the random number              */

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       /* Use a predefined standard distribution:                     */
       /*   Gaussian with mean 2. and standard deviation 0.5.         */
       /* Choose a method: TDR with parameters                        */
       /*   c = 0: use T(x)=log(x) for the transformation;            */
       /*   variant "immediate acceptance";                           */
       /*   number of construction points = 10.                       */
       gen = unur_str2gen(
            "normal(2,0.5) & method=tdr; c=0.; variant_ia; cpoints=10");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* It is possible with method TDR to truncate the distribution */
       /* for an existing generator object ...                        */
       unur_tdr_chg_truncated( gen, -1., 0. );

       /* ... and sample again.                                       */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_4,  Next: Example_anti,  Prev: Example_3_str,  Up: Examples

2.9 Change uniform random generator
===================================

All generator object use the same default uniform random number
generator by default. This can be changed to any generator of your
choice such that each generator object has its own random number
generator or can share it with some other objects.  It is also possible
to change the default generator at any time.  See *note Using uniform
random number generators: URNG, for details.

   The following example shows how the uniform random number generator
can be set or changed for a generator object. It requires the
RNGSTREAMS library to be installed and used. Otherwise the example must
be modified accordingly.

     /* ------------------------------------------------------------- */
     /* File: example_rngstreams.c                                    */
     /* ------------------------------------------------------------- */
     #ifdef UNURAN_SUPPORTS_RNGSTREAM
     /* ------------------------------------------------------------- */
     /* This example makes use of the RNGSTREAM library for           */
     /* for generating uniform random numbers.                        */
     /* (see http://statmath.wu.ac.at/software/RngStreams/)           */
     /* To compile this example you must have set                     */
     /*   ./configure --with-urng-rngstream                           */
     /* (Of course the executable has to be linked against the        */
     /* RNGSTREAM library.)                                           */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header files.                                  */
     #include <unuran.h>
     #include <unuran_urng_rngstreams.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double x;          /* will hold the random number              */
       double fparams[2]; /* array for parameters for distribution    */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Declare objects for uniform random number generators.       */
       UNUR_URNG  *urng1, *urng2;    /* uniform generator objects     */

       /* The RNGSTREAMS library sets a package seed.                 */
       unsigned long seed[] = {111u, 222u, 333u, 444u, 555u, 666u};
       RngStream_SetPackageSeed(seed);

       /* RngStreams only:                                            */
       /* Make a object for uniform random number generator.          */
       /* For details see                                             */
       /* http://statmath.wu.ac.at/software/RngStreams/               */
       urng1 = unur_urng_rngstream_new("urng-1");
       if (urng1 == NULL) exit (EXIT_FAILURE);

       /* Use a predefined standard distribution:                     */
       /*   Beta with parameters 2 and 3.                             */
       fparams[0] = 2.;
       fparams[1] = 3.;
       distr = unur_distr_beta( fparams, 2 );

       /* Choose a method: TDR.                                       */
       par = unur_tdr_new(distr);

       /* Set uniform generator in parameter object                   */
       unur_set_urng( par, urng1 );

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* Now we want to switch to a different (independent) stream   */
       /* of uniform random numbers.                                  */
       urng2 = unur_urng_rngstream_new("urng-2");
       if (urng2 == NULL) exit (EXIT_FAILURE);
       unur_chg_urng( gen, urng2 );

       /* ... and sample again.                                       */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       /* We also should destroy the uniform random number generators.*/
       unur_urng_free(urng1);
       unur_urng_free(urng2);

       exit (EXIT_SUCCESS);
     } /* end of main() */

     /* ------------------------------------------------------------- */
     #else
     #include <stdio.h>
     #include <stdlib.h>
     int main(void) {
       printf("You must enable the RNGSTREAM library to run this example!\n\n");
       exit (77);    /* exit code for automake check routines */
     }
     #endif
     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_anti,  Next: Example_anti_str,  Prev: Example_4,  Up: Examples

2.10 Sample pairs of antithetic random variates
===============================================

Using Method TDR it is easy to sample pairs of antithetic random
variates.

     /* ------------------------------------------------------------- */
     /* File: example_anti.c                                          */
     /* ------------------------------------------------------------- */
     #ifdef UNURAN_SUPPORTS_PRNG
     /* ------------------------------------------------------------- */
     /* This example makes use of the PRNG library for generating     */
     /* uniform random numbers.                                       */
     /* (see http://statmath.wu.ac.at/prng/)                          */
     /* To compile this example you must have set                     */
     /*   ./configure --with-urng-prng                                */
     /* (Of course the executable has to be linked against the        */
     /* PRNG library.)                                                */
     /* ------------------------------------------------------------- */

     /* Example how to sample from two streams of antithetic random   */
     /* variates from Gaussian N(2,5) and Gamma(4) distribution, resp.*/

     /* ------------------------------------------------------------- */

     /* Include UNURAN header files.                                  */
     #include <unuran.h>
     #include <unuran_urng_prng.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double xn, xg;     /* will hold the random number              */
       double fparams[2]; /* array for parameters for distribution    */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen_normal, *gen_gamma;
                             /* generator objects                     */

       /* Declare objects for uniform random number generators.       */
       UNUR_URNG  *urng1, *urng2;    /* uniform generator objects     */

       /* PRNG only:                                                  */
       /* Make a object for uniform random number generator.          */
       /* For details see http://statmath.wu.ac.at/prng/.             */


       /* The first generator: Gaussian N(2,5) */

       /* uniform generator: We use the Mersenne Twister.             */
       urng1 = unur_urng_prng_new("mt19937(1237)");
       if (urng1 == NULL) exit (EXIT_FAILURE);

       /* UNURAN generator object for N(2,5) */
       fparams[0] = 2.;
       fparams[1] = 5.;
       distr = unur_distr_normal( fparams, 2 );

       /* Choose method TDR with variant PS.                          */
       par = unur_tdr_new( distr );
       unur_tdr_set_variant_ps( par );

       /* Set uniform generator in parameter object.                  */
       unur_set_urng( par, urng1 );

       /* Set auxilliary uniform random number generator.             */
       /* We use the default generator.                               */
       unur_use_urng_aux_default( par );

       /* Alternatively you can create and use your own auxilliary    */
       /* uniform random number generator:                            */
       /*    UNUR_URNG  *urng_aux;                                    */
       /*    urng_aux = unur_urng_prng_new("tt800");                  */
       /*    if (urng_aux == NULL) exit (EXIT_FAILURE);               */
       /*    unur_set_urng_aux( par, urng_aux );                      */

       /* Create the generator object.                                */
       gen_normal = unur_init(par);
       if (gen_normal == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Destroy distribution object (gen_normal has its own copy).  */
       unur_distr_free(distr);


       /* The second generator: Gamma(4) with antithetic variates.    */

       /* uniform generator: We use the Mersenne Twister.             */
       urng2 = unur_urng_prng_new("anti(mt19937(1237))");
       if (urng2 == NULL) exit (EXIT_FAILURE);

       /* UNURAN generator object for gamma(4) */
       fparams[0] = 4.;
       distr = unur_distr_gamma( fparams, 1 );

       /* Choose method TDR with variant PS.                          */
       par = unur_tdr_new( distr );
       unur_tdr_set_variant_ps( par );

       /* Set uniform generator in parameter object.                  */
       unur_set_urng( par, urng2 );

       /* Set auxilliary uniform random number generator.             */
       /* We use the default generator.                               */
       unur_use_urng_aux_default( par );

       /* Alternatively you can create and use your own auxilliary    */
       /* uniform random number generator (see above).                */
       /* Notice that both generator objects gen_normal and           */
       /* gen_gamma can share the same auxilliary URNG.               */

       /* Create the generator object.                                */
       gen_gamma = unur_init(par);
       if (gen_gamma == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Destroy distribution object (gen_normal has its own copy).  */
       unur_distr_free(distr);


       /* Now we can sample pairs of negatively correlated random     */
       /* variates. E.g.:                                             */
       for (i=0; i<10; i++) {
         xn = unur_sample_cont(gen_normal);
         xg = unur_sample_cont(gen_gamma);
         printf("%g, %g\n",xn,xg);
       }


       /* When you do not need the generator objects any more, you    */
       /* can destroy it.                                             */
       unur_free(gen_normal);
       unur_free(gen_gamma);

       /* We also should destroy the uniform random number generators.*/
       unur_urng_free(urng1);
       unur_urng_free(urng2);

       exit (EXIT_SUCCESS);
     } /* end of main() */

     /* ------------------------------------------------------------- */
     #else
     #include <stdio.h>
     #include <stdlib.h>
     int main(void) {
       printf("You must enable the PRNG library to run this example!\n\n");
       exit (77);    /* exit code for automake check routines */
     }
     #endif
     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_anti_str,  Next: Example_More,  Prev: Example_anti,  Up: Examples

2.11 Sample pairs of antithetic random variates (String API)
============================================================

Using Method TDR it is easy to sample pairs of antithetic random
variates.

     /* ------------------------------------------------------------- */
     /* File: example_anti_str.c                                      */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */
     #ifdef UNURAN_SUPPORTS_PRNG
     /* ------------------------------------------------------------- */
     /* This example makes use of the PRNG library for generating     */
     /* uniform random numbers.                                       */
     /* (see http://statmath.wu.ac.at/prng/)                          */
     /* To compile this example you must have set                     */
     /*   ./configure --with-urng-prng                                */
     /* (Of course the executable has to be linked against the        */
     /* PRNG library.)                                                */
     /* ------------------------------------------------------------- */

     /* Example how to sample from two streams of antithetic random   */
     /* variates from Gaussian N(2,5) and Gamma(4) distribution, resp.*/

     /* ------------------------------------------------------------- */

     /* Include UNURAN header files.                                  */
     #include <unuran.h>
     #include <unuran_urng_prng.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double xn, xg;     /* will hold the random number              */

       /* Declare UNURAN generator objects.                           */
       UNUR_GEN   *gen_normal, *gen_gamma;

       /* PRNG only:                                                  */
       /* Make a object for uniform random number generator.          */
       /* For details see http://statmath.wu.ac.at/prng/.             */

       /* Create the first generator: Gaussian N(2,5)                 */
       gen_normal = unur_str2gen("normal(2,5) & method=tdr; variant_ps & urng=mt19937(1237)");
       if (gen_normal == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }
       /* Set auxilliary uniform random number generator.             */
       /* We use the default generator.                               */
       unur_chgto_urng_aux_default(gen_normal);

       /* The second generator: Gamma(4) with antithetic variates.    */
       gen_gamma = unur_str2gen("gamma(4) & method=tdr; variant_ps & urng=anti(mt19937(1237))");
       if (gen_gamma == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }
       unur_chgto_urng_aux_default(gen_gamma);


       /* Now we can sample pairs of negatively correlated random     */
       /* variates. E.g.:                                             */
       for (i=0; i<10; i++) {
         xn = unur_sample_cont(gen_normal);
         xg = unur_sample_cont(gen_gamma);
         printf("%g, %g\n",xn,xg);
       }


       /* When you do not need the generator objects any more, you    */
       /* can destroy it.                                             */

       /* But first we have to destroy the uniform random number      */
       /* generators.                                                 */
       unur_urng_free(unur_get_urng(gen_normal));
       unur_urng_free(unur_get_urng(gen_gamma));

       unur_free(gen_normal);
       unur_free(gen_gamma);


       exit (EXIT_SUCCESS);
     } /* end of main() */

     /* ------------------------------------------------------------- */
     #else
     #include <stdio.h>
     #include <stdlib.h>
     int main(void) {
       printf("You must enable the PRNG library to run this example!\n\n");
       exit (77);    /* exit code for automake check routines */
     }
     #endif
     /* ------------------------------------------------------------- */


File: unuran.info,  Node: Example_More,  Prev: Example_anti_str,  Up: Examples

2.12 More examples
==================

*Note Methods for continuous univariate distributions: Methods_for_CONT.

   *Note Methods for continuous empirical univariate distributions:
Methods_for_CEMP.

   *Note Methods for continuous empirical multivariate distributions:
Methods_for_CVEMP.

   *Note Methods for discrete univariate distributions:
Methods_for_DISCR.


File: unuran.info,  Node: StringAPI,  Next: Distribution_objects,  Prev: Examples,  Up: Top

3 String Interface
******************

* Menu:

* StringSyntax:: Syntax of String Interface
* StringDistr:: Distribution String
* StringFunct:: Function String
* StringMethod:: Method String
* StringURNG:: Uniform RNG String

   The string interface (string API) provided by the `unur_str2gen'
call is the easiest way to use UNU.RAN. This function takes a character
string as its argument. The string is parsed and the information
obtained is used to create a generator object. It returns `NULL' if
this fails, either due to a syntax error, or due to invalid data. In
both cases `unur_error' is set to the corresponding error codes (*note
Error reporting: Error_reporting.).  Additionally there exists the call
`unur_str2distr' that only produces a distribution object.

   Notice that the string interface does not implement all features of
the UNU.RAN library. For trickier tasks it might be necessary to use
the UNU.RAN calls.

   In *note Examples::, all examples are given using both the UNU.RAN
standard API and this convenient string API.  The corresponding
programm codes are equivalent.

Function reference
------------------

 -- Function: UNUR_GEN* unur_str2gen (const CHAR* STRING)
     Get a generator object for the distribution, method and uniform
     random number generator as described in the given STRING.  See
     *note Syntax of String Interface: StringSyntax, for details.

 -- Function: UNUR_DISTR* unur_str2distr (const CHAR* STRING)
     Get a distribution object for the distribution described in STRING.
     See *note Syntax of String Interface: StringSyntax, and *note
     Distribution String: StringDistr, for details. However, only the
     block for the distribution object is allowed.

 -- Function: UNUR_GEN* unur_makegen_ssu (const CHAR* DISTRSTR, const
          CHAR* METHODSTR, UNUR_URNG* URNG)
 -- Function: UNUR_GEN* unur_makegen_dsu (const UNUR_DISTR*
          DISTRIBUTION, const CHAR* METHODSTR, UNUR_URNG* URNG)
     Make a generator object for the distribution, method and uniform
     random number generator. The distribution can be given either as
     string DISTRSTR or as a distribution object DISTR.  The method
     must be given as a string METHODSTR.  For the syntax of these
     strings see *note Syntax of String Interface: StringSyntax.
     However, the `method' keyword is optional for these calls and can
     be omitted. If METHODSTR is the empty (blank) string or `NULL'
     method AUTO is used.  The uniform random number generator is
     optional. If URNG is `NULL' then the default uniform random number
     generator is used.


File: unuran.info,  Node: StringSyntax,  Next: StringDistr,  Up: StringAPI

3.1 Syntax of String Interface
==============================

The given string holds information about the requested distribution and
(optional) about the sampling method and the uniform random number
generator invoked. The interpretation of the string is not
case-sensitive, all white spaces are ignored.

   The string consists of up to three blocks, separated by ampersands
`&'.

   Each block consists of `<key>=<value>' pairs, separated by
semicolons `;'.

   The first key in each block is used to indicate each block.  We have
three different blocks with the following (first) keys:
`distr'
     definition of the distribution (*note Distribution String:
     StringDistr.).

`method'
     description of the transformation method (*note Method String:
     StringMethod.).

`urng'
     uniform random number generation (*note Uniform RNG String:
     StringURNG.).

   The `distr' block must be the very first block and is obligatory.
All the other blocks are optional and can be arranged in arbitrary
order.

   For details see the following description of each block.

   In the following example
     distr = normal(3.,0.75); domain = (0,inf) & method = tdr; c = 0
   we have a distribution block for the truncated normal distribution
with mean 3 and standard deviation 0.75 on domain (0,infinity); and
block for choosing method TDR with parameter c set to 0.


   The `<key>=<value>' pairs that follow the first (initial) pair in
each block are used to set parameters.  The name of the parameter is
given by the `<key>' string. It is deduced from the UNU.RAN set calls
by taking the part after `..._set_'.  The `<value>' string holds the
parameters to be set, separated by commata `,'.  There are three types
of parameters:
_string `"..."'_
     i.e. any sequence of characters enclosed by double quotes `"..."',

_list `(...,...)'_
     i.e. list of _numbers_, separated by commata `,', enclosed in
     parenthesis `(...)', and

_number_
     a sequence of characters that is not enclosed by quotes `"..."' or
     parenthesis `(...)'.  It is interpreted as float or integer
     depending on the type of the corresponding parameter.
   The `<value>' string (including the character `=') can be omitted
when no argument is required.

   At the moment not all `set' calls are supported.  The syntax for the
`<value>' can be directly derived from the corresponding `set' calls.
To simplify the syntax additional shortcuts are possible. The following
table lists the parameters for the `set' calls that are supported by
the string interface; the entry in parenthesis gives the type of the
argument as `<value>' string:

`int  (number):'
     The number is interpreted as an integer.  `true' and `on' are
     transformed to `1', `false' and `off' are transformed to `0'.  A
     missing argument is interpreted as `1'.

`int, int  (number, number or list):'
     The two numbers or the first two entries in the list are
     interpreted as a integers.  `inf' and `-inf' are transformed to
     `INT_MAX' and `INT_MIN' respectively, i.e. the largest and smallest
     integers that can be represented by the computer.

`unsigned (number):'
     The number is interpreted as an unsigned hexadecimal integer.

`double  (number):'
     The number is interpreted as a floating point number.  `inf' is
     transformed to `UNUR_INFINITY'.

`double, double  (number, number or list):'
     The two numbers or the first two entries in the list are
     interpreted as a floating point numbers.  `inf' is transformed to
     `UNUR_INFINITY'. However using `inf' in the list might not work
     for all versions of C. Then it is recommended to use two single
     numbers instead of a list.

`int, double*  ([number,] list or number):'
        - The list is interpreted as a double array.  The (first)
          number as its length.  If it is less than the actual size of
          the array only the first entries of the array are used.

        - If only the list is given (i.e., if the first number is
          omitted), the first number is set to the actual size of the
          array.

        - If only the number is given (i.e., if the list is omitted),
          the `NULL' pointer is used instead an array as argument.

`double*, int  (list [,number]):'
     The list is interpreted as a double array.  The (second) number as
     its length.  If the length is omitted, it is replaced by the
     actual size of the array. (Only in the `distribution' block!)

`char*  (string):'
     The character string is passed as is to the corresponding set call.


   Notice that missing entries in a list of numbers are interpreted as
`0'. E.g, a the list `(1,,3)' is read as `(1,0,3)', the list `(1,2,)'
as `(1,2,0)'.

   The the list of `key' strings in *note Keys for Distribution String:
KeysDistr, and *note Keys for Method String: KeysMethod, for further
details.


File: unuran.info,  Node: StringDistr,  Next: StringFunct,  Prev: StringSyntax,  Up: StringAPI

3.2 Distribution String
=======================

* Menu:

* KeysDistr:: Keys for Distribution String

   The `distr' block must be the very first block and is obligatory.
For that reason the keyword `distr' is optional and can be omitted
(together with the `=' character).  Moreover it is ignored while
parsing the string. However, to avoid some possible confusion it has to
start with the letter `d' (if it is given at all).

   The value of the `distr' key is used to get the distribution object,
either via a `unur_distr_<value>' call for a standard distribution via
a `unur_distr_<value>_new' call to get an object of a generic
distribution.  However not all generic distributions are supported yet.

   The parameters for the standard distribution are given as a list.
There must not be any character (other than white space) between the
name of the standard distribution and the opening parenthesis `(' of
this list. E.g., to get a beta distribution, use
     distr = beta(2,4)

   To get an object for a discrete distribution with probability vector
(0.5,0.2,0.3), use
     distr = discr; pv = (0.5,0.2,0.3)

   It is also possible to set a PDF, PMF, or CDF using a string.  E.g.,
to create a continuous distribution with PDF proportional to
`exp(-sqrt(2+(x-1)^2) + (x-1))' and domain (0,inf) use
     distr = cont; pdf = "exp(-sqrt(2+(x-1)^2) + (x-1))"
   Notice: If this string is used in an `unur_str2distr' or
`unur_str2gen' call the double quotes `"' must be protected by `\"'.
Alternatively, single quotes may be used instead
     distr = cont; pdf = 'exp(-sqrt(2+(x-1)^2) + (x-1))'

   For the details of function strings see *note Function String:
StringFunct.


File: unuran.info,  Node: KeysDistr,  Up: StringDistr

3.2.1 Keys for Distribution String
----------------------------------

List of standard distributions *note Standard distributions: Stddist.

   - `[distr =] beta(...)'      => *note beta::

   - `[distr =] binomial(...)'      => *note binomial::

   - `[distr =] cauchy(...)'      => *note cauchy::

   - `[distr =] chi(...)'      => *note chi::

   - `[distr =] chisquare(...)'      => *note chisquare::

   - `[distr =] exponential(...)'      => *note exponential::

   - `[distr =] extremeI(...)'      => *note extremeI::

   - `[distr =] extremeII(...)'      => *note extremeII::

   - `[distr =] F(...)'      => *note F::

   - `[distr =] gamma(...)'      => *note gamma::

   - `[distr =] geometric(...)'      => *note geometric::

   - `[distr =] gig(...)'      => *note gig::

   - `[distr =] gig2(...)'      => *note gig2::

   - `[distr =] hyperbolic(...)'      => *note hyperbolic::

   - `[distr =] hypergeometric(...)'      => *note hypergeometric::

   - `[distr =] ig(...)'      => *note ig::

   - `[distr =] laplace(...)'      => *note laplace::

   - `[distr =] logarithmic(...)'      => *note logarithmic::

   - `[distr =] logistic(...)'      => *note logistic::

   - `[distr =] lognormal(...)'      => *note lognormal::

   - `[distr =] lomax(...)'      => *note lomax::

   - `[distr =] negativebinomial(...)'      => *note negativebinomial::

   - `[distr =] normal(...)'      => *note normal::

   - `[distr =] pareto(...)'      => *note pareto::

   - `[distr =] poisson(...)'      => *note poisson::

   - `[distr =] powerexponential(...)'      => *note powerexponential::

   - `[distr =] rayleigh(...)'      => *note rayleigh::

   - `[distr =] slash(...)'      => *note slash::

   - `[distr =] student(...)'      => *note student::

   - `[distr =] triangular(...)'      => *note triangular::

   - `[distr =] uniform(...)'      => *note uniform::

   - `[distr =] weibull(...)'      => *note weibull::


   List of generic distributions *note Handling Distribution Objects:
Distribution_objects.

   - `[distr =] cemp'      => *note CEMP::

   - `[distr =] cont'      => *note CONT::

   - `[distr =] discr'      => *note DISCR::


   _Notice_: Order statistics for continuous distributions (*note
CORDER::) are supported by using the key `orderstatistics' for
distributions of type `CONT'.


   List of keys that are available via the String API.  For description
see the corresponding UNU.RAN set calls.

   * All distribution types
    `name = "<string>"'
          => *note `unur_distr_set_name': funct:unur_distr_set_name.


   * `cemp'  (Distribution Type)    (*note CEMP::)
    `data = (<list>) [, <int>]'
          => *note `unur_distr_cemp_set_data':
          funct:unur_distr_cemp_set_data.

    `hist_bins = (<list>) [, <int>]'
          => *note `unur_distr_cemp_set_hist_bins':
          funct:unur_distr_cemp_set_hist_bins.

    `hist_domain = <double>, <double> | (<list>)'
          => *note `unur_distr_cemp_set_hist_domain':
          funct:unur_distr_cemp_set_hist_domain.

    `hist_prob = (<list>) [, <int>]'
          => *note `unur_distr_cemp_set_hist_prob':
          funct:unur_distr_cemp_set_hist_prob.


   * `cont'  (Distribution Type)    (*note CONT::)
    `cdf = "<string>"'
          => *note `unur_distr_cont_set_cdfstr':
          funct:unur_distr_cont_set_cdfstr.

    `center = <double>'
          => *note `unur_distr_cont_set_center':
          funct:unur_distr_cont_set_center.

    `domain = <double>, <double> | (<list>)'
          => *note `unur_distr_cont_set_domain':
          funct:unur_distr_cont_set_domain.

    `hr = "<string>"'
          => *note `unur_distr_cont_set_hrstr':
          funct:unur_distr_cont_set_hrstr.

    `logcdf = "<string>"'
          => *note `unur_distr_cont_set_logcdfstr':
          funct:unur_distr_cont_set_logcdfstr.

    `logpdf = "<string>"'
          => *note `unur_distr_cont_set_logpdfstr':
          funct:unur_distr_cont_set_logpdfstr.

    `mode = <double>'
          => *note `unur_distr_cont_set_mode':
          funct:unur_distr_cont_set_mode.

    `pdf = "<string>"'
          => *note `unur_distr_cont_set_pdfstr':
          funct:unur_distr_cont_set_pdfstr.

    `pdfarea = <double>'
          => *note `unur_distr_cont_set_pdfarea':
          funct:unur_distr_cont_set_pdfarea.

    `pdfparams = (<list>) [, <int>]'
          => *note `unur_distr_cont_set_pdfparams':
          funct:unur_distr_cont_set_pdfparams.

    `orderstatistics = <int>, <int> | (<list>)'
          Make order statistics for given distribution. The first
          parameter gives the sample size, the second parameter its
          rank.  (see *note `unur_distr_corder_new':
          funct:unur_distr_corder_new.)


   * `discr'  (Distribution Type)    (*note DISCR::)
    `cdf = "<string>"'
          => *note `unur_distr_discr_set_cdfstr':
          funct:unur_distr_discr_set_cdfstr.

    `domain = <int>, <int> | (<list>)'
          => *note `unur_distr_discr_set_domain':
          funct:unur_distr_discr_set_domain.

    `mode [= <int>]'
          => *note `unur_distr_discr_set_mode':
          funct:unur_distr_discr_set_mode.

    `pmf = "<string>"'
          => *note `unur_distr_discr_set_pmfstr':
          funct:unur_distr_discr_set_pmfstr.

    `pmfparams = (<list>) [, <int>]'
          => *note `unur_distr_discr_set_pmfparams':
          funct:unur_distr_discr_set_pmfparams.

    `pmfsum = <double>'
          => *note `unur_distr_discr_set_pmfsum':
          funct:unur_distr_discr_set_pmfsum.

    `pv = (<list>) [, <int>]'
          => *note `unur_distr_discr_set_pv':
          funct:unur_distr_discr_set_pv.



File: unuran.info,  Node: StringFunct,  Next: StringMethod,  Prev: StringDistr,  Up: StringAPI

3.3 Function String
===================

In unuran it is also possible to define functions (e.g. CDF or PDF) as
strings. As you can see in Example 2 (*note Example_2_str::) it is very
easy to define the PDF of a distribution object by means of a string.
The possibilities using this string interface are more restricted than
using a pointer to a routine coded in C (*note Example_2::).  But the
differences in evaluation time is small.  When a distribution object is
defined using this string interface then of course the same conditions
on the given density or CDF must be satisfied for a chosen method as
for the standard API.  This string interface can be used for both
within the UNU.RAN string API using the `unur_str2gen' call, and for
calls that define the density or CDF for a particular distribution
object as done with (e.g.) the call `unur_distr_cont_set_pdfstr'.  Here
is an example for the latter case:

     unur_distr_cont_set_pdfstr(distr,"1-x*x");

Syntax
------

The syntax for the function string is case insensitive, white spaces
are ingnored. The expressions are similar to most programming languages
and mathematical programs (see also the examples below). It is
especially influenced by C. The usual preceedence rules are used (from
highest to lowest preceedence: functions, power, multiplication,
addition, relation operators). Use parentheses in case of doubt or when
these preceedences should be changed.

   Relation operators can be used as indicator functions, i.e. the term
`(x>1)' is evaluted as `1' if this relation is satisfied, and as `0'
otherwise.

   The first unknown symbol (letter or word) is interpreted as the
variable of the function. It is recommended to use `x'.  Only one
variable can be used.


_Important_: The symbol `e' is used twice, for Euler's constant (=
2.7182...) and as exponent.  The multiplication operator `*' must not
be omitted, i.e.  `2 x' is interpreted as the string `2x' (which will
result in a syntax error).

List of symbols
---------------

Numbers

Numbers are composed using digits and, optionally, a sign, a decimal
point, and an exponent indicated by `e'.

Symbol    Explanation                 Examples
`0...9'   digits                      `2343'
`.'       decimal point               `165.567'
`-'       negative sign               `-465.223'
`e'       exponet                     `13.2e-4' (=0.00132)


Constants

`pi'      pi = 3.1415...              `3*pi+2'
`e'       Euler's constant            `3*e+2' (= 10.15...; do not
                                      cofuse with `3e2' = 300)
`inf'     infinity                    (used for domains)


Special symbols

`('       opening parenthesis         `2*(3+x)'
`)'       closing parenthesis         `2*(3+x)'
`,'       (argument) list separator   `mod(13,2)'


Relation operators (Indicator functions)

`<'       less than                   `(x<1)'
`='       equal                       `(2=x)'
`=='      same as `='                 `(x==3)'
`>'       greater than                `(x>0)'
`<='      less than or equal          `(x<=1)'
`!='      not equal                   `(x!0)'
`<>'      same as `!='                `(x<>pi)'
`>='      greater or equal            `(x>=1)'


Arithmetic operators

`+'       addition                    `2+x'
`-'       subtraction                 `2-x'
`*'       multiplication              `2*x'
`/'       division                    `x/2'
`^'       power                       `x^2'


Functions

`mod'     `mod(m,n)' remainder of     mod(x,2)
          devision m over n           
`exp'     exponential function (same  `exp(-x^2)' (same as `e^(-x^2)')
          as `e^x')                   
`log'     natural logarithm           `log(x)'
`sin'     sine                        `sin(x)'
`cos'     cosine                      `cos(x)'
`tan'     tangent                     `tan(x)'
`sec'     secant                      `sec(x*2)'
`sqrt'    square root                 `sqrt(2*x)'
`abs'     absolute value              `abs(x)'
`sgn'     sign function               `sign(x)*3'


Variable

`x'       variable                    `3*x^2'

Examples
--------


     1.231+7.9876*x-1.234e-3*x^2+3.335e-5*x^3

     sin(2*pi*x)+x^2

     exp(-((x-3)/2.1)^2)

It is also possible to define functions using different terms on
separate domains. However, instead of constructs using `if ... then ...
else ...' indicator functions are available.

For example to define the density of triangular distribution with
domain (-1,1) and mode 0 use

     (x>-1)*(x<0)*(1+x) + (x>=0)*(x<1)*(1-x)


File: unuran.info,  Node: StringMethod,  Next: StringURNG,  Prev: StringFunct,  Up: StringAPI

3.4 Method String
=================

* Menu:

* KeysMethod:: Keys for Method String

   The key `method' is obligatory, it must be the first key and its
value is the name of a method suitable for the choosen standard
distribution. E.g., if method AROU is chosen, use
     method = arou

   Of course the all following keys dependend on the method choosen at
first. All corresponding `set' calls of UNU.RAN are available and the
key is the string after the `unur_<methodname>_set_' part of the
command. E.g., UNU.RAN provides the command
`unur_arou_set_max_sqhratio' to set a parameter of method AROU.  To
call this function via the string-interface, the key `max_sqhratio' can
be used:
     max_sqhratio = 0.9
   Additionally the keyword `debug' can be used to set debugging flags
(see *note Debugging: Debug, for details).

   If this block is omitted, a suitable default method is used. Notice
however that the default method may change in future versions of
UNU.RAN.


File: unuran.info,  Node: KeysMethod,  Up: StringMethod

3.4.1 Keys for Method String
----------------------------

List of methods and keys that are available via the String API.  For
description see the corresponding UNU.RAN set calls.

   * `method = arou'      => `unur_arou_new' (*note AROU::)
    `cpoints = <int> [, (<list>)] | (<list>)'
          => *note `unur_arou_set_cpoints': funct:unur_arou_set_cpoints.

    `darsfactor = <double>'
          => *note `unur_arou_set_darsfactor':
          funct:unur_arou_set_darsfactor.

    `guidefactor = <double>'
          => *note `unur_arou_set_guidefactor':
          funct:unur_arou_set_guidefactor.

    `max_segments [= <int>]'
          => *note `unur_arou_set_max_segments':
          funct:unur_arou_set_max_segments.

    `max_sqhratio = <double>'
          => *note `unur_arou_set_max_sqhratio':
          funct:unur_arou_set_max_sqhratio.

    `pedantic [= <int>]'
          => *note `unur_arou_set_pedantic':
          funct:unur_arou_set_pedantic.

    `usecenter [= <int>]'
          => *note `unur_arou_set_usecenter':
          funct:unur_arou_set_usecenter.

    `usedars [= <int>]'
          => *note `unur_arou_set_usedars': funct:unur_arou_set_usedars.

    `verify [= <int>]'
          => *note `unur_arou_set_verify': funct:unur_arou_set_verify.


   * `method = ars'      => `unur_ars_new' (*note ARS::)
    `cpoints = <int> [, (<list>)] | (<list>)'
          => *note `unur_ars_set_cpoints': funct:unur_ars_set_cpoints.

    `max_intervals [= <int>]'
          => *note `unur_ars_set_max_intervals':
          funct:unur_ars_set_max_intervals.

    `max_iter [= <int>]'
          => *note `unur_ars_set_max_iter': funct:unur_ars_set_max_iter.

    `pedantic [= <int>]'
          => *note `unur_ars_set_pedantic': funct:unur_ars_set_pedantic.

    `reinit_ncpoints [= <int>]'
          => *note `unur_ars_set_reinit_ncpoints':
          funct:unur_ars_set_reinit_ncpoints.

    `reinit_percentiles = <int> [, (<list>)] | (<list>)'
          => *note `unur_ars_set_reinit_percentiles':
          funct:unur_ars_set_reinit_percentiles.

    `verify [= <int>]'
          => *note `unur_ars_set_verify': funct:unur_ars_set_verify.


   * `method = auto'      => `unur_auto_new' (*note AUTO::)
    `logss [= <int>]'
          => *note `unur_auto_set_logss': funct:unur_auto_set_logss.


   * `method = cstd'      => `unur_cstd_new' (*note CSTD::)
    `variant = <unsigned>'
          => *note `unur_cstd_set_variant': funct:unur_cstd_set_variant.


   * `method = dari'      => `unur_dari_new' (*note DARI::)
    `cpfactor = <double>'
          => *note `unur_dari_set_cpfactor':
          funct:unur_dari_set_cpfactor.

    `squeeze [= <int>]'
          => *note `unur_dari_set_squeeze': funct:unur_dari_set_squeeze.

    `tablesize [= <int>]'
          => *note `unur_dari_set_tablesize':
          funct:unur_dari_set_tablesize.

    `verify [= <int>]'
          => *note `unur_dari_set_verify': funct:unur_dari_set_verify.


   * `method = dau'      => `unur_dau_new' (*note DAU::)
    `urnfactor = <double>'
          => *note `unur_dau_set_urnfactor':
          funct:unur_dau_set_urnfactor.


   * `method = dgt'      => `unur_dgt_new' (*note DGT::)
    `guidefactor = <double>'
          => *note `unur_dgt_set_guidefactor':
          funct:unur_dgt_set_guidefactor.

    `variant = <unsigned>'
          => *note `unur_dgt_set_variant': funct:unur_dgt_set_variant.


   * `method = dsrou'      => `unur_dsrou_new' (*note DSROU::)
    `cdfatmode = <double>'
          => *note `unur_dsrou_set_cdfatmode':
          funct:unur_dsrou_set_cdfatmode.

    `verify [= <int>]'
          => *note `unur_dsrou_set_verify': funct:unur_dsrou_set_verify.


   * `method = dstd'      => `unur_dstd_new' (*note DSTD::)
    `variant = <unsigned>'
          => *note `unur_dstd_set_variant': funct:unur_dstd_set_variant.


   * `method = empk'      => `unur_empk_new' (*note EMPK::)
    `beta = <double>'
          => *note `unur_empk_set_beta': funct:unur_empk_set_beta.

    `kernel = <unsigned>'
          => *note `unur_empk_set_kernel': funct:unur_empk_set_kernel.

    `positive [= <int>]'
          => *note `unur_empk_set_positive':
          funct:unur_empk_set_positive.

    `smoothing = <double>'
          => *note `unur_empk_set_smoothing':
          funct:unur_empk_set_smoothing.

    `varcor [= <int>]'
          => *note `unur_empk_set_varcor': funct:unur_empk_set_varcor.


   * `method = gibbs'      => `unur_gibbs_new' (*note GIBBS::)
    `burnin [= <int>]'
          => *note `unur_gibbs_set_burnin': funct:unur_gibbs_set_burnin.

    `c = <double>'
          => *note `unur_gibbs_set_c': funct:unur_gibbs_set_c.

    `thinning [= <int>]'
          => *note `unur_gibbs_set_thinning':
          funct:unur_gibbs_set_thinning.

    `variant_coordinate'
          => *note `unur_gibbs_set_variant_coordinate':
          funct:unur_gibbs_set_variant_coordinate.

    `variant_random_direction'
          => *note `unur_gibbs_set_variant_random_direction':
          funct:unur_gibbs_set_variant_random_direction.


   * `method = hinv'      => `unur_hinv_new' (*note HINV::)
    `boundary = <double>, <double> | (<list>)'
          => *note `unur_hinv_set_boundary':
          funct:unur_hinv_set_boundary.

    `cpoints = (<list>), <int>'
          => *note `unur_hinv_set_cpoints': funct:unur_hinv_set_cpoints.

    `guidefactor = <double>'
          => *note `unur_hinv_set_guidefactor':
          funct:unur_hinv_set_guidefactor.

    `max_intervals [= <int>]'
          => *note `unur_hinv_set_max_intervals':
          funct:unur_hinv_set_max_intervals.

    `order [= <int>]'
          => *note `unur_hinv_set_order': funct:unur_hinv_set_order.

    `u_resolution = <double>'
          => *note `unur_hinv_set_u_resolution':
          funct:unur_hinv_set_u_resolution.


   * `method = hitro'      => `unur_hitro_new' (*note HITRO::)
    `adaptive_multiplier = <double>'
          => *note `unur_hitro_set_adaptive_multiplier':
          funct:unur_hitro_set_adaptive_multiplier.

    `burnin [= <int>]'
          => *note `unur_hitro_set_burnin': funct:unur_hitro_set_burnin.

    `r = <double>'
          => *note `unur_hitro_set_r': funct:unur_hitro_set_r.

    `thinning [= <int>]'
          => *note `unur_hitro_set_thinning':
          funct:unur_hitro_set_thinning.

    `use_adaptiveline [= <int>]'
          => *note `unur_hitro_set_use_adaptiveline':
          funct:unur_hitro_set_use_adaptiveline.

    `use_adaptiverectangle [= <int>]'
          => *note `unur_hitro_set_use_adaptiverectangle':
          funct:unur_hitro_set_use_adaptiverectangle.

    `use_boundingrectangle [= <int>]'
          => *note `unur_hitro_set_use_boundingrectangle':
          funct:unur_hitro_set_use_boundingrectangle.

    `v = <double>'
          => *note `unur_hitro_set_v': funct:unur_hitro_set_v.

    `variant_coordinate'
          => *note `unur_hitro_set_variant_coordinate':
          funct:unur_hitro_set_variant_coordinate.

    `variant_random_direction'
          => *note `unur_hitro_set_variant_random_direction':
          funct:unur_hitro_set_variant_random_direction.


   * `method = hrb'      => `unur_hrb_new' (*note HRB::)
    `upperbound = <double>'
          => *note `unur_hrb_set_upperbound':
          funct:unur_hrb_set_upperbound.

    `verify [= <int>]'
          => *note `unur_hrb_set_verify': funct:unur_hrb_set_verify.


   * `method = hrd'      => `unur_hrd_new' (*note HRD::)
    `verify [= <int>]'
          => *note `unur_hrd_set_verify': funct:unur_hrd_set_verify.


   * `method = hri'      => `unur_hri_new' (*note HRI::)
    `p0 = <double>'
          => *note `unur_hri_set_p0': funct:unur_hri_set_p0.

    `verify [= <int>]'
          => *note `unur_hri_set_verify': funct:unur_hri_set_verify.


   * `method = itdr'      => `unur_itdr_new' (*note ITDR::)
    `cp = <double>'
          => *note `unur_itdr_set_cp': funct:unur_itdr_set_cp.

    `ct = <double>'
          => *note `unur_itdr_set_ct': funct:unur_itdr_set_ct.

    `verify [= <int>]'
          => *note `unur_itdr_set_verify': funct:unur_itdr_set_verify.

    `xi = <double>'
          => *note `unur_itdr_set_xi': funct:unur_itdr_set_xi.


   * `method = mvtdr'      => `unur_mvtdr_new' (*note MVTDR::)
    `boundsplitting = <double>'
          => *note `unur_mvtdr_set_boundsplitting':
          funct:unur_mvtdr_set_boundsplitting.

    `maxcones [= <int>]'
          => *note `unur_mvtdr_set_maxcones':
          funct:unur_mvtdr_set_maxcones.

    `stepsmin [= <int>]'
          => *note `unur_mvtdr_set_stepsmin':
          funct:unur_mvtdr_set_stepsmin.

    `verify [= <int>]'
          => *note `unur_mvtdr_set_verify': funct:unur_mvtdr_set_verify.


   * `method = ninv'      => `unur_ninv_new' (*note NINV::)
    `max_iter [= <int>]'
          => *note `unur_ninv_set_max_iter':
          funct:unur_ninv_set_max_iter.

    `start = <double>, <double> | (<list>)'
          => *note `unur_ninv_set_start': funct:unur_ninv_set_start.

    `table [= <int>]'
          => *note `unur_ninv_set_table': funct:unur_ninv_set_table.

    `u_resolution = <double>'
          => *note `unur_ninv_set_u_resolution':
          funct:unur_ninv_set_u_resolution.

    `usebisect'
          => *note `unur_ninv_set_usebisect':
          funct:unur_ninv_set_usebisect.

    `usenewton'
          => *note `unur_ninv_set_usenewton':
          funct:unur_ninv_set_usenewton.

    `useregula'
          => *note `unur_ninv_set_useregula':
          funct:unur_ninv_set_useregula.

    `x_resolution = <double>'
          => *note `unur_ninv_set_x_resolution':
          funct:unur_ninv_set_x_resolution.


   * `method = nrou'      => `unur_nrou_new' (*note NROU::)
    `center = <double>'
          => *note `unur_nrou_set_center': funct:unur_nrou_set_center.

    `r = <double>'
          => *note `unur_nrou_set_r': funct:unur_nrou_set_r.

    `u = <double>, <double> | (<list>)'
          => *note `unur_nrou_set_u': funct:unur_nrou_set_u.

    `v = <double>'
          => *note `unur_nrou_set_v': funct:unur_nrou_set_v.

    `verify [= <int>]'
          => *note `unur_nrou_set_verify': funct:unur_nrou_set_verify.


   * `method = pinv'      => `unur_pinv_new' (*note PINV::)
    `boundary = <double>, <double> | (<list>)'
          => *note `unur_pinv_set_boundary':
          funct:unur_pinv_set_boundary.

    `keepcdf [= <int>]'
          => *note `unur_pinv_set_keepcdf': funct:unur_pinv_set_keepcdf.

    `max_intervals [= <int>]'
          => *note `unur_pinv_set_max_intervals':
          funct:unur_pinv_set_max_intervals.

    `order [= <int>]'
          => *note `unur_pinv_set_order': funct:unur_pinv_set_order.

    `searchboundary = <int>, <int> | (<list>)'
          => *note `unur_pinv_set_searchboundary':
          funct:unur_pinv_set_searchboundary.

    `smoothness [= <int>]'
          => *note `unur_pinv_set_smoothness':
          funct:unur_pinv_set_smoothness.

    `u_resolution = <double>'
          => *note `unur_pinv_set_u_resolution':
          funct:unur_pinv_set_u_resolution.

    `use_upoints [= <int>]'
          => *note `unur_pinv_set_use_upoints':
          funct:unur_pinv_set_use_upoints.

    `usecdf'
          => *note `unur_pinv_set_usecdf': funct:unur_pinv_set_usecdf.

    `usepdf'
          => *note `unur_pinv_set_usepdf': funct:unur_pinv_set_usepdf.


   * `method = srou'      => `unur_srou_new' (*note SROU::)
    `cdfatmode = <double>'
          => *note `unur_srou_set_cdfatmode':
          funct:unur_srou_set_cdfatmode.

    `pdfatmode = <double>'
          => *note `unur_srou_set_pdfatmode':
          funct:unur_srou_set_pdfatmode.

    `r = <double>'
          => *note `unur_srou_set_r': funct:unur_srou_set_r.

    `usemirror [= <int>]'
          => *note `unur_srou_set_usemirror':
          funct:unur_srou_set_usemirror.

    `usesqueeze [= <int>]'
          => *note `unur_srou_set_usesqueeze':
          funct:unur_srou_set_usesqueeze.

    `verify [= <int>]'
          => *note `unur_srou_set_verify': funct:unur_srou_set_verify.


   * `method = ssr'      => `unur_ssr_new' (*note SSR::)
    `cdfatmode = <double>'
          => *note `unur_ssr_set_cdfatmode':
          funct:unur_ssr_set_cdfatmode.

    `pdfatmode = <double>'
          => *note `unur_ssr_set_pdfatmode':
          funct:unur_ssr_set_pdfatmode.

    `usesqueeze [= <int>]'
          => *note `unur_ssr_set_usesqueeze':
          funct:unur_ssr_set_usesqueeze.

    `verify [= <int>]'
          => *note `unur_ssr_set_verify': funct:unur_ssr_set_verify.


   * `method = tabl'      => `unur_tabl_new' (*note TABL::)
    `areafraction = <double>'
          => *note `unur_tabl_set_areafraction':
          funct:unur_tabl_set_areafraction.

    `boundary = <double>, <double> | (<list>)'
          => *note `unur_tabl_set_boundary':
          funct:unur_tabl_set_boundary.

    `cpoints = <int> [, (<list>)] | (<list>)'
          => *note `unur_tabl_set_cpoints': funct:unur_tabl_set_cpoints.

    `darsfactor = <double>'
          => *note `unur_tabl_set_darsfactor':
          funct:unur_tabl_set_darsfactor.

    `guidefactor = <double>'
          => *note `unur_tabl_set_guidefactor':
          funct:unur_tabl_set_guidefactor.

    `max_intervals [= <int>]'
          => *note `unur_tabl_set_max_intervals':
          funct:unur_tabl_set_max_intervals.

    `max_sqhratio = <double>'
          => *note `unur_tabl_set_max_sqhratio':
          funct:unur_tabl_set_max_sqhratio.

    `nstp [= <int>]'
          => *note `unur_tabl_set_nstp': funct:unur_tabl_set_nstp.

    `pedantic [= <int>]'
          => *note `unur_tabl_set_pedantic':
          funct:unur_tabl_set_pedantic.

    `slopes = (<list>), <int>'
          => *note `unur_tabl_set_slopes': funct:unur_tabl_set_slopes.

    `usedars [= <int>]'
          => *note `unur_tabl_set_usedars': funct:unur_tabl_set_usedars.

    `useear [= <int>]'
          => *note `unur_tabl_set_useear': funct:unur_tabl_set_useear.

    `variant_ia [= <int>]'
          => *note `unur_tabl_set_variant_ia':
          funct:unur_tabl_set_variant_ia.

    `variant_splitmode = <unsigned>'
          => *note `unur_tabl_set_variant_splitmode':
          funct:unur_tabl_set_variant_splitmode.

    `verify [= <int>]'
          => *note `unur_tabl_set_verify': funct:unur_tabl_set_verify.


   * `method = tdr'      => `unur_tdr_new' (*note TDR::)
    `c = <double>'
          => *note `unur_tdr_set_c': funct:unur_tdr_set_c.

    `cpoints = <int> [, (<list>)] | (<list>)'
          => *note `unur_tdr_set_cpoints': funct:unur_tdr_set_cpoints.

    `darsfactor = <double>'
          => *note `unur_tdr_set_darsfactor':
          funct:unur_tdr_set_darsfactor.

    `guidefactor = <double>'
          => *note `unur_tdr_set_guidefactor':
          funct:unur_tdr_set_guidefactor.

    `max_intervals [= <int>]'
          => *note `unur_tdr_set_max_intervals':
          funct:unur_tdr_set_max_intervals.

    `max_sqhratio = <double>'
          => *note `unur_tdr_set_max_sqhratio':
          funct:unur_tdr_set_max_sqhratio.

    `pedantic [= <int>]'
          => *note `unur_tdr_set_pedantic': funct:unur_tdr_set_pedantic.

    `reinit_ncpoints [= <int>]'
          => *note `unur_tdr_set_reinit_ncpoints':
          funct:unur_tdr_set_reinit_ncpoints.

    `reinit_percentiles = <int> [, (<list>)] | (<list>)'
          => *note `unur_tdr_set_reinit_percentiles':
          funct:unur_tdr_set_reinit_percentiles.

    `usecenter [= <int>]'
          => *note `unur_tdr_set_usecenter':
          funct:unur_tdr_set_usecenter.

    `usedars [= <int>]'
          => *note `unur_tdr_set_usedars': funct:unur_tdr_set_usedars.

    `usemode [= <int>]'
          => *note `unur_tdr_set_usemode': funct:unur_tdr_set_usemode.

    `variant_gw'
          => *note `unur_tdr_set_variant_gw':
          funct:unur_tdr_set_variant_gw.

    `variant_ia'
          => *note `unur_tdr_set_variant_ia':
          funct:unur_tdr_set_variant_ia.

    `variant_ps'
          => *note `unur_tdr_set_variant_ps':
          funct:unur_tdr_set_variant_ps.

    `verify [= <int>]'
          => *note `unur_tdr_set_verify': funct:unur_tdr_set_verify.


   * `method = utdr'      => `unur_utdr_new' (*note UTDR::)
    `cpfactor = <double>'
          => *note `unur_utdr_set_cpfactor':
          funct:unur_utdr_set_cpfactor.

    `deltafactor = <double>'
          => *note `unur_utdr_set_deltafactor':
          funct:unur_utdr_set_deltafactor.

    `pdfatmode = <double>'
          => *note `unur_utdr_set_pdfatmode':
          funct:unur_utdr_set_pdfatmode.

    `verify [= <int>]'
          => *note `unur_utdr_set_verify': funct:unur_utdr_set_verify.


   * `method = vempk'      => `unur_vempk_new' (*note VEMPK::)
    `smoothing = <double>'
          => *note `unur_vempk_set_smoothing':
          funct:unur_vempk_set_smoothing.

    `varcor [= <int>]'
          => *note `unur_vempk_set_varcor': funct:unur_vempk_set_varcor.


   * `method = vnrou'      => `unur_vnrou_new' (*note VNROU::)
    `r = <double>'
          => *note `unur_vnrou_set_r': funct:unur_vnrou_set_r.

    `v = <double>'
          => *note `unur_vnrou_set_v': funct:unur_vnrou_set_v.

    `verify [= <int>]'
          => *note `unur_vnrou_set_verify': funct:unur_vnrou_set_verify.



File: unuran.info,  Node: StringURNG,  Prev: StringMethod,  Up: StringAPI

3.5 Uniform RNG String
======================

The value of the `urng' key is passed to the PRNG interface (see *Note
Overview: (prng)Top.  for details).  However it only works when using
the PRNG library is enabled, see *note Installation:: for details.
There are no other keys.

   IMPORTANT: UNU.RAN creates a new uniform random number generator for
the generator object. The pointer to this uniform generator has to be
read and saved via a `unur_get_urng' call in order to clear the memory
_before_ the UNU.RAN generator object is destroyed.

   If this block is omitted the UNU.RAN default generator is used
(which _must not_ be destroyed).


File: unuran.info,  Node: Distribution_objects,  Next: Methods,  Prev: StringAPI,  Up: Top

4 Handling distribution objects
*******************************

* Menu:

* AllDistr:: Functions for all kinds of distribution objects
* CONT:: Continuous univariate distributions
* CORDER:: Continuous univariate order statistics
* CEMP:: Continuous empirical univariate distributions
* CVEC:: Continuous multivariate distributions
* CONDI:: Continuous univariate full conditional distribution
* CVEMP:: Continuous empirical multivariate distributions
* MATR:: MATRix distributions
* DISCR:: Discrete univariate distributions

   Objects of type `UNUR_DISTR' are used for handling distributions.
All data about a distribution are stored in this object. UNU.RAN
provides functions that return instances of such objects for standard
distributions (*note Standard distributions: Stddist.).  It is then
possible to change these distribution objects by various set calls.
Moreover, it is possible to build a distribution object entirely from
scratch. For this purpose there exists `unur_distr_<type>_new' calls
that return an empty object of this type for each object type (eg.
univariate contiuous) which can be filled with the appropriate set
calls.

   UNU.RAN distinguishes between several types of distributions, each
of which has its own sets of possible parameters (for details see the
corresponding sections):
   - continuous univariate distributions

   - continuous univariate order statistics

   - continuous empirical univariate distributions

   - continuous multivariate distributions

   - continuous empirical multivariate distributions

   - matrix distributions

   - discrete univariate distributions

   Notice that there are essential data about a distribution, eg. the
PDF, a list of (shape, scale, location) parameters for the
distribution, and the domain of (the possibly truncated) distribution.
And there exist parameters that are/can be derived from these, eg. the
mode of the distribution or the area below the given PDF (which need
not be normalized for many methods). UNU.RAN keeps track of parameters
which are known. Thus if one of the essential parameters is changed all
derived parameters are marked as unknown and must be set again if these
are required for the chosen generation method.  Additionally to set
calls there are calls for updating derived parameters for objects
provided by the UNU.RAN library of standard distributions (one for each
parameter to avoid computational overhead since not all parameters are
required for all generator methods).

   All parameters of distribution objects can be read by corresponding
get calls.

   Every generator object has its own copy of a distribution object
which is accessible by a `unur_get_distr' call. Thus the parameter for
this distribution can be read. However, *never* extract the
distribution object out of a generator object and run one of the set
calls on it to modify the distribution.  (How should the poor generator
object know what has happend?) Instead there exist calls for each of the
generator methods that change particular parameters of the internal
copy of the distribution object.

How To Use
..........

UNU.RAN collects all data required for a particular generation method
in a _distribution object_. There are two ways to get an instance of a
distributions object:
  1. Build a distribtion from scratch, by means of the corresponding
     `unur_distr_<type>_new' call, where `<type>' is the type of the
     distribution as listed in the below subsections.

  2. Use the corresponding `unur_distr_<name>_new' call to get prebuild
     distribution from the UNU.RAN library of standard distributions.
     Here `<name>' is the name of the standard distribution in *note
     Standard distributions: Stddist.

   In either cases the corresponding `unur_distr_<type>_set_<param>'
calls to set the necessary parameters `<param>' (case 1), or change the
values of the standard distribution in case 2 (if this makes sense for
you). In the latter case `<type>' is the type to which the standard
distribution belongs to.  These `set' calls return `UNUR_SUCCESS' when
the correspondig parameter has been set successfully. Otherwise an
error code is returned.

   The parameters of a distribution are divided into _essential_ and
_derived_ parameters.

   Notice, that there are some restrictions in setting parameters to
avoid possible confusions.  Changing essential parameters marks derived
parameters as `unknown'. Some of the parameters cannot be changed any
more when already set; some parameters block each others.  In such a
case a new instance of a distribution object has to be build.

   Additionally `unur_distr_<type>_upd_<param>' calls can be used for
updating derived parameters for objects provided by the UNU.RAN library
of standard distributions.

   All parameters of a distribution object get be read by means of
`unur_distr_<type>_get_<param>' calls.

   Every distribution object be identified by its `name' which is a
string of arbitrary characters provided by the user. For standard
distribution it is automatically set to `<name>' in the corresponding
`new' call. It can be changed to any other string.


File: unuran.info,  Node: AllDistr,  Next: CONT,  Up: Distribution_objects

4.1 Functions for all kinds of distribution objects
===================================================

The calls in this section can be applied to all distribution objects.

   - Destroy `free' an instance of a generator object.

   - Ask for the `type' of a generator object.

   - Ask for the `dimension' of a generator object.

   - Deal with the `name' (identifier string) of a generator object.

Function reference
------------------

 -- Function: void unur_distr_free (UNUR_DISTR* DISTRIBUTION)
     Destroy the DISTRIBUTION object.

 -- Function: int unur_distr_set_name (UNUR_DISTR* DISTRIBUTION, const
          CHAR* NAME)
 -- Function: const char* unur_distr_get_name (const UNUR_DISTR*
          DISTRIBUTION)
     Set and get NAME of DISTRIBUTION. The NAME can be an arbitrary
     character string. It can be used to identify generator objects for
     the user. It is used by UNU.RAN when printing information of the
     distribution object into a log files.

 -- Function: int unur_distr_get_dim (const UNUR_DISTR* DISTRIBUTION)
     Get number of components of a random vector (its dimension) the
     DISTRIBUTION.

     For univariate distributions it returns dimension `1'.

     For matrix distributions it returns the number of components
     (i.e., number of rows times number of columns).  When the
     respective numbers of rows and columns are needed use
     `unur_distr_matr_get_dim' instead.

 -- Function: unsigned int unur_distr_get_type (const UNUR_DISTR*
          DISTRIBUTION)
     Get type of DISTRIBUTION.  Possible types are
    `UNUR_DISTR_CONT'
          univariate continuous distribution

    `UNUR_DISTR_CEMP'
          empirical continuous univariate distribution (i.e. a sample)

    `UNUR_DISTR_CVEC'
          continuous mulitvariate distribution

    `UNUR_DISTR_CVEMP'
          empirical continuous multivariate distribution (i.e. a vector
          sample)

    `UNUR_DISTR_DISCR'
          discrete univariate distribution

    `UNUR_DISTR_MATR'
          matrix distribution

     Alternatively the `unur_distr_is_<TYPE>' calls can be used.

 -- Function: int unur_distr_is_cont (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is a continuous univariate distribution.

 -- Function: int unur_distr_is_cvec (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is a continuous multivariate distribution.

 -- Function: int unur_distr_is_cemp (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is an empirical continuous univariate
     distribution, i.e. a sample.

 -- Function: int unur_distr_is_cvemp (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is an empirical continuous multivariate
     distribution.

 -- Function: int unur_distr_is_discr (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is a discrete univariate distribution.

 -- Function: int unur_distr_is_matr (const UNUR_DISTR* DISTRIBUTION)
     `TRUE' if DISTRIBUTION is a matrix distribution.

 -- Function: int unur_distr_set_extobj (UNUR_DISTR* DISTRIBUTION,
          const VOID* EXTOBJ)
     Store a pointer to an external object. This might be usefull if
     the PDF, PMF, CDF or other functions used to implement a particular
     distribution a parameter set that cannot be stored as doubles
     (e.g. pointers to some structure that holds information of the
     distribution).

     *Important:* When UNU.RAN copies this distribution object into the
     generator object, then the address EXTOBJ that this pointer
     contains is simply copied.  Thus the generator holds an address of
     a non-private object!  Once the generator object has been created
     any change in the external object might effect the generator
     object.

     *Warning:* External objects must be used with care. Once the
     generator object has been created or the distribution object has
     been copied you _must not_ destroy this external object.

 -- Function: const void* unur_distr_get_extobj (const UNUR_DISTR*
          DISTRIBUTION)
     Get the pointer to the external object.

     _Important:_ Changing this object must be done with with extreme
     care.


File: unuran.info,  Node: CONT,  Next: CORDER,  Prev: AllDistr,  Up: Distribution_objects

4.2 Continuous univariate distributions
=======================================

The calls in this section can be applied to continuous univariate
distributions.

   - Create a `new' instance of a continuous univariate distribution.

   - Handle and evaluate distribution function (CDF, `cdf'),
     probability density function (PDF, `pdf') and the derivative of
     the density function (`dpdf').  The following is important:
        . `pdf' need not be normalized, i.e., any integrable
          nonnegative function can be used.

        . `dpdf' must the derivate of the function provided as `pdf'.

        . `cdf' must be a distribution function, i.e. it must be
          monotonically increasing with range [0,1].

        . If `cdf' and `pdf' are used together for a pariticular
          generation method, then `pdf' must be the derivate of the
          `cdf', i.e., it must be normalized.

   - Handle and evaluate the logarithm of the probability density
     function (logPDF, `logpdf') and the derivative of the logarithm of
     the density function (`dlogpdf').

     Some methods use the logarithm of the density if available.

   - Set (and change) parameters (`pdfparams') and the area below the
     graph (`pdfarea') of the given density.

   - Set the `mode' (or pole) of the distribution.

   - Set the `center' of the distribution.  It is used by some
     generation methods to adjust the parameters of the generation
     algorithms to gain better performance. It can be seens as the
     location of the "central part" of the distribution.

   - Some generation methods require the hazard rate (`hr') of the
     distribution instead of its `pdf'.

   - Alternatively, `cdf', `pdf', `dpdf', and `hr' can be provided as
     `str'ings instead of function pointers.

   - Set the `domain' of the distribution.  Notice that the library
     also can handle truncated distributions, i.e., distributions that
     are derived from (standard) distributions by simply restricting
     its domain to a subset. However, there is a subtle difference
     between changing the domain of a distribution object by a
     `unur_distr_cont_set_domain' call and changing the (truncated)
     domain for an existing generator object. The domain of the
     distribution object is used to create the generator object with
     hats, squeezes, tables, etc.  Whereas truncating the domain of an
     existing generator object need not necessarily require a
     recomputation of these data.  Thus by a
     `unur_<method>_chg_truncated' call (if available) the sampling
     region is restricted to the subset of the domain of the given
     distribution object. However, generation methods that require a
     recreation of the generator object when the domain is changed have
     a `unur_<method>_chg_domain' call instead.  For these calls there
     are of course no restrictions on the given domain (i.e., it is
     possible to increase the domain of the distribution) (*note
     Methods::, for details).


Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_cont_new (void)
     Create a new (empty) object for univariate continuous distribution.

Essential parameters
....................

 -- Function: int unur_distr_cont_set_pdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* PDF)
 -- Function: int unur_distr_cont_set_dpdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* DPDF)
 -- Function: int unur_distr_cont_set_cdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* CDF)
 -- Function: int unur_distr_cont_set_invcdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* INVCDF)
     Set respective pointer to the probability density function (PDF),
     the derivative of the probability density function (dPDF), the
     cumulative distribution function (CDF), and the inverse CDF of the
     DISTRIBUTION.  Each of these function pointers must be of type
     `double funct(double x, const UNUR_DISTR *distr)'.

     Due to the fact that some of the methods do not require a
     normalized PDF the following is important:

        - The given CDF must be the cumulative distribution function of
          the (non-truncated) distribution. If a distribution from the
          UNU.RAN library of standard distributions (*note Standard
          distributions: Stddist.)  is truncated, there is no need to
          change the CDF.

        - If both the CDF and the PDF are used (for a method or for
          order statistics), the PDF must be the derivative of the CDF.
          If a truncated distribution for one of the standard
          distributions from the UNU.RAN library of standard
          distributions is used, there is no need to change the PDF.

        - If the area below the PDF is required for a given distribution
          it must be given by the `unur_distr_cont_set_pdfarea' call.
          For a truncated distribution this must be of course the
          integral of the PDF in the given truncated domain.  For
          distributions from the UNU.RAN library of standard
          distributions this is done automatically by the
          `unur_distr_cont_upd_pdfarea' call.


     It is important to note that all these functions must return a
     result for all values of X. Eg., if the domain of a given PDF is
     the interval [-1,1], then the given function must return `0.0' for
     all points outside this interval.  In case of an overflow the PDF
     should return `UNUR_INFINITY'.

     It is not possible to change such a function. Once the PDF or CDF
     is set it cannot be overwritten. This also holds when the logPDF
     is given or when the PDF is given by the
     `unur_distr_cont_set_pdfstr' or `unur_distr_cont_set_logpdfstr'
     call.  A new distribution object has to be used instead.

 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_pdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_dpdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_cdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_invcdf (const
          UNUR_DISTR* DISTRIBUTION)
     Get the respective pointer to the PDF, the derivative of the PDF,
     the CDF, and the inverse CDF of the DISTRIBUTION. The pointer is
     of type `double funct(double x, const UNUR_DISTR *distr)'.  If the
     corresponding function is not available for the distribution, the
     `NULL' pointer is returned.

 -- Function: double unur_distr_cont_eval_pdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_dpdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_cdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_invcdf (double U, const
          UNUR_DISTR* DISTRIBUTION)
     Evaluate the PDF, derivative of the PDF, the CDF, and the inverse
     CDF at X and U,respectively.  Notice that DISTRIBUTION must not be
     the `NULL' pointer.  If the corresponding function is not
     available for the distribution, `UNUR_INFINITY' is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     _IMPORTANT:_ In the case of a truncated standard distribution
     these calls always return the respective values of the
     _untruncated_ distribution!

 -- Function: int unur_distr_cont_set_logpdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* LOGPDF)
 -- Function: int unur_distr_cont_set_dlogpdf (UNUR_DISTR*
          DISTRIBUTION, UNUR_FUNCT_CONT* DLOGPDF)
 -- Function: int unur_distr_cont_set_logcdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* LOGCDF)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_logpdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_dlogpdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_logcdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_logpdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_dlogpdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cont_eval_logcdf (double X, const
          UNUR_DISTR* DISTRIBUTION)
     Analogous calls for the logarithm of the density distribution
     functions.

 -- Function: int unur_distr_cont_set_pdfstr (UNUR_DISTR* DISTRIBUTION,
          const CHAR* PDFSTR)
     This function provides an alternative way to set a PDF and its
     derivative of the DISTRIBUTION.  PDFSTR is a character string that
     contains the formula for the PDF, see *note Function String:
     StringFunct, for details.  The derivative of the given PDF is
     computed automatically.  See also the remarks for the
     `unur_distr_cont_set_pdf' call.

     It is not possible to call this funtion twice or to call this
     function after a `unur_distr_cont_set_pdf' call.

 -- Function: int unur_distr_cont_set_cdfstr (UNUR_DISTR* DISTRIBUTION,
          const CHAR* CDFSTR)
     This function provides an alternative way to set a CDF; analogously
     to the `unur_distr_cont_set_pdfstr' call.  The PDF and its
     derivative of the given CDF are computed automatically.

 -- Function: char* unur_distr_cont_get_pdfstr (const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: char* unur_distr_cont_get_dpdfstr (const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: char* unur_distr_cont_get_cdfstr (const UNUR_DISTR*
          DISTRIBUTION)
     Get pointer to respective string for PDF, derivate of PDF, and CDF
     of DISTRIBUTION that is given as string (instead of a function
     pointer).  This call allocates memory to produce this string. It
     should be freed when it is not used any more.

 -- Function: int unur_distr_cont_set_pdfparams (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* PARAMS, int N_PARAMS)
     Sets array of parameters for DISTRIBUTION. There is an upper limit
     for the number of parameters `n_params'. It is given by the macro
     `UNUR_DISTR_MAXPARAMS' in `unuran_config.h'. (It is set to 5 by
     default but can be changed to any appropriate nonnegative number.)
     If N_PARAMS is negative or exceeds this limit no parameters are
     copied into the distribution object and `unur_errno' is set to
     `UNUR_ERR_DISTR_NPARAMS'.

     For standard distributions from the UNU.RAN library the parameters
     are checked. Moreover, the domain is updated automatically unless
     it has been changed before by a `unur_distr_cont_set_domain' call.
     If the given parameters are invalid for the standard distribution,
     then no parameters are set and an error code is returned.  Notice,
     that the given parameter list for such a distribution is handled
     in the same way as in the corresponding `new' calls, i.e. optional
     parameters for the PDF that are not present in the given list are
     (re-)set to their default values.

     *Important:* If the parameters of a distribution from the UNU.RAN
     library of standard distributions (*note Standard distributions:
     Stddist.)  are changed, then neither its mode nor the normalization
     constant are updated. Please use the respective calls
     `unur_distr_cont_upd_mode' and `unur_distr_cont_upd_pdfarea'.
     Moreover, if the domain has been changed by a
     `unur_distr_cont_set_domain' it is not automatically updated,
     either.  Updating the normalization constant is in particular very
     important, when the CDF of the distribution is used.

 -- Function: int unur_distr_cont_get_pdfparams (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** PARAMS)
     Get number of parameters of the PDF and set pointer PARAMS to
     array of parameters. If no parameters are stored in the object, an
     error code is returned and `params' is set to `NULL'.

     _Important:_ Do *not* change the entries in PARAMS!

 -- Function: int unur_distr_cont_set_pdfparams_vec (UNUR_DISTR*
          DISTRIBUTION, int PAR, const DOUBLE* PARAM_VEC, int
          N_PARAM_VEC)
     This function provides an interface for additional vector
     parameters for a continuous DISTRIBUTION.

     It sets the parameter with number PAR.  PAR indicates directly
     which of the parameters is set and must be a number between `0'
     and `UNUR_DISTR_MAXPARAMS'-1 (the upper limit of possible
     parameters defined in `unuran_config.h'; it is set to 5 but can be
     changed to any appropriate nonnegative number.)

     The entries of a this parameter are given by the array PARAM_VEC
     of size N_PARAM_VEC.

     If PARAM_VEC is `NULL' then the corresponding entry is cleared.

     If an error occurs no parameters are copied into the parameter
     object `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_cont_get_pdfparams_vec (const UNUR_DISTR*
          DISTRIBUTION, int PAR, const DOUBLE** PARAM_VECS)
     Get parameter of the PDF with number PAR.  The pointer to the
     parameter array is stored in PARAM_VECS, its size is returned by
     the function.  If the requested parameter is not set, then an
     error code is returned and `params' is set to `NULL'.

     _Important:_ Do *not* change the entries in PARAM_VECS!

 -- Function: int unur_distr_cont_set_logpdfstr (UNUR_DISTR*
          DISTRIBUTION, const CHAR* LOGPDFSTR)
 -- Function: char* unur_distr_cont_get_logpdfstr (const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: char* unur_distr_cont_get_dlogpdfstr (const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: int unur_distr_cont_set_logcdfstr (UNUR_DISTR*
          DISTRIBUTION, const CHAR* LOGCDFSTR)
 -- Function: char* unur_distr_cont_get_logcdfstr (const UNUR_DISTR*
          DISTRIBUTION)
     Analogous calls for the logarithm of the density and distribution
     functions.

 -- Function: int unur_distr_cont_set_domain (UNUR_DISTR* DISTRIBUTION,
          double LEFT, double RIGHT)
     Set the left and right borders of the domain of the distribution.
     This can also be used to truncate an existing distribution. For
     setting the boundary to +/- infinity use `+/- UNUR_INFINITY'.  If
     RIGHT is not strictly greater than LEFT no domain is set and
     `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

     _Important:_ For some technical reasons it is assumed that the
     density is unimodal and thus monotone on either side of the mode!
     This is used in the case when the given mode is outside of the
     original domain. Then the mode is set to the corresponding
     boundary of the new domain.  If this result is not the desired it
     must be changed by using a `unur_distr_cont_set_mode' call (or a
     `unur_distr_cont_upd_mode' call). The same holds for the center of
     the distribution.

 -- Function: int unur_distr_cont_get_domain (const UNUR_DISTR*
          DISTRIBUTION, double* LEFT, double* RIGHT)
     Get the left and right borders of the domain of the distribution.
     If the domain is not set `+/- UNUR_INFINITY' is assumed and
     returned. No error is reported in this case.

 -- Function: int unur_distr_cont_get_truncated (const UNUR_DISTR*
          DISTRIBUTION, double* LEFT, double* RIGHT)
     Get the left and right borders of the (truncated) domain of the
     distribution. For non-truncated distribution this call is
     equivalent to the `unur_distr_cont_get_domain' call.

     This call is only useful in connection with a `unur_get_distr' call
     to get the boundaries of the sampling region of a generator object.

 -- Function: int unur_distr_cont_set_hr (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CONT* HAZARD)
     Set pointer to the hazard rate (HR) of the DISTRIBUTION.

     The _hazard rate_ (or failure rate) is a mathematical way of
     describing aging. If the lifetime X is a random variable with
     density f(x) and CDF F(x) the hazard rate h(x) is defined as h(x)
     = f(x) / (1-F(x)).  In other words, h(x) represents the
     (conditional) rate of failure of a unit that has survived up to
     time x with probability 1-F(x).  The key distribution is the
     exponential distribution as it has constant hazard rate of value
     1. Hazard rates tending to infinity describe distributions with
     sub-exponential tails whereas distributions with hazard rates
     tending to zero have heavier tails than the exponential
     distribution.

     It is important to note that all these functions must return a
     result for all floats x. In case of an overflow the PDF should
     return `UNUR_INFINITY'.

     *Important*: Do not simply use f(x) / (1-F(x)), since this is
     numerically very unstable and results in numerical noise if F(x)
     is (very) close to 1. Moreover, if the density f(x) is known a
     generation method that uses the density is more appropriate.

     It is not possible to change such a function. Once the HR is set it
     cannot be overwritten. This also holds when the HR is given by the
     `unur_distr_cont_set_hrstr' call. A new distribution object has to
     be used instead.

 -- Function: UNUR_FUNCT_CONT* unur_distr_cont_get_hr (const
          UNUR_DISTR* DISTRIBUTION)
     Get the pointer to the hazard rate of the DISTRIBUTION. The
     pointer is of type `double funct(double x, const UNUR_DISTR
     *distr)'.  If the corresponding function is not available for the
     distribution, the `NULL' pointer is returned.

 -- Function: double unur_distr_cont_eval_hr (double X, const
          UNUR_DISTR* DISTRIBUTION)
     Evaluate the hazard rate at X.  Notice that DISTRIBUTION must not
     be the `NULL' pointer.  If the corresponding function is not
     available for the distribution, `UNUR_INFINITY' is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_cont_set_hrstr (UNUR_DISTR* DISTRIBUTION,
          const CHAR* HRSTR)
     This function provides an alternative way to set a hazard rate and
     its derivative of the DISTRIBUTION.  HRSTR is a character string
     that contains the formula for the HR, see *note Function String:
     StringFunct, for details.  See also the remarks for the
     `unur_distr_cont_set_hr' call.

     It is not possible to call this funtion twice or to call this
     function after a `unur_distr_cont_set_hr' call.

 -- Function: char* unur_distr_cont_get_hrstr (const UNUR_DISTR*
          DISTRIBUTION)
     Get pointer to string for HR of DISTRIBUTION that is given via the
     string interface. This call allocates memory to produce this
     string. It should be freed when it is not used any more.

Derived parameters
..................

The following paramters *must* be set whenever one of the essential
parameters has been set or changed (and the parameter is required for
the chosen method).

 -- Function: int unur_distr_cont_set_mode (UNUR_DISTR* DISTRIBUTION,
          double MODE)
     Set mode of DISTRIBUTION. The MODE must be contained in the domain
     of DISTRIBUTION. Otherwise the mode is not set and `unur_errno' is
     set to `UNUR_ERR_DISTR_SET'.  For distributions with unbounded
     density, this call is used to set the pole of the PDF. Notice that
     the PDF should then return UNUR_INFINITY at the pole.  Notice that
     the mode is adjusted when the domain is set, see the remark for the
     `unur_distr_cont_set_domain' call.

 -- Function: int unur_distr_cont_upd_mode (UNUR_DISTR* DISTRIBUTION)
     Recompute the mode of the DISTRIBUTION. This call works properly
     for distribution objects from the UNU.RAN library of standard
     distributions when the corresponding function is available.
     Otherwise a (slow) numerical mode finder based on Brent's
     algorithm is used. If it failes `unur_errno' is set to
     `UNUR_ERR_DISTR_DATA'.

 -- Function: double unur_distr_cont_get_mode (UNUR_DISTR* DISTRIBUTION)
     Get mode of DISTRIBUTION. If the mode is not marked as known,
     `unur_distr_cont_upd_mode' is called to compute the mode. If this
     is not successful `UNUR_INFINITY' is returned and `unur_errno' is
     set to `UNUR_ERR_DISTR_GET'.  (There is no difference between the
     case where no routine for computing the mode is available and the
     case where no mode exists for the distribution at all.)

 -- Function: int unur_distr_cont_set_center (UNUR_DISTR* DISTRIBUTION,
          double CENTER)
     Set center of the DISTRIBUTION. The center is used by some methods
     to shift the distribution in order to decrease numerical round-off
     error. If not given explicitly a default is used.

     _Important:_ This call does not check whether the center is
     contained in the given domain.

     Default: The mode, if set by a `unur_distr_cont_set_mode' or
     `unur_distr_cont_upd_mode' call; otherwise `0'.

 -- Function: double unur_distr_cont_get_center (const UNUR_DISTR*
          DISTRIBUTION)
     Get center of the DISTRIBUTION. It always returns some point as
     there always exists a default for the center, see
     `unur_distr_cont_set_center'.

 -- Function: int unur_distr_cont_set_pdfarea (UNUR_DISTR*
          DISTRIBUTION, double AREA)
     Set the area below the PDF. If `area' is non-positive, no area is
     set and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

     For a distribution object created by the UNU.RAN library of
     standard distributions you always should use the
     `unur_distr_cont_upd_pdfarea'.  Otherwise there might be ambiguous
     side-effects.

 -- Function: int unur_distr_cont_upd_pdfarea (UNUR_DISTR* DISTRIBUTION)
     Recompute the area below the PDF of the distribution.  It only
     works for distribution objects from the UNU.RAN library of
     standard distributions when the corresponding function is
     available. Otherwise `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     This call also sets the normalization constant such that the given
     PDF is the derivative of a given CDF, i.e. the area is 1.
     However, for truncated distributions the area is smaller than 1.

     The call does not work for distributions from the UNU.RAN library
     of standard distributions with truncated domain when the CDF is
     not available.

 -- Function: double unur_distr_cont_get_pdfarea (UNUR_DISTR*
          DISTRIBUTION)
     Get the area below the PDF of the distribution. If this area is
     not known,
     `unur_distr_cont_upd_pdfarea' is called to compute it. If this is
     not successful `UNUR_INFINITY' is returned and `unur_errno' is set
     to `UNUR_ERR_DISTR_GET'.


File: unuran.info,  Node: CORDER,  Next: CEMP,  Prev: CONT,  Up: Distribution_objects

4.3 Continuous univariate order statistics
==========================================

These are special cases of a continuous univariate distributions and
thus they have most of these parameters (with the exception that
functions cannot be changed). Additionally,

   - there is a call to extract the underlying distribution,

   - and a call to handle the `rank' of the order statistics.


Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_corder_new (const UNUR_DISTR*
          DISTRIBUTION, int N, int K)
     Create an object for order statistics of sample size N and rank K.
     DISTRIBUTION must be a pointer to a univariate continuous
     distribution.  The resulting generator object is of the same type
     as of a `unur_distr_cont_new' call.  (However, it cannot be used
     to make an order statistics out of an order statistics.)

     To have a PDF for the order statistics, the given distribution
     object must contain a CDF and a PDF. Moreover, it is assumed that
     the given PDF is the derivative of the given CDF. Otherwise the
     area below the PDF of the order statistics is not computed
     correctly.

     _Important:_ There is no warning when the computed area below the
     PDF of the order statistics is wrong.

 -- Function: const UNUR_DISTR* unur_distr_corder_get_distribution
          (const UNUR_DISTR* DISTRIBUTION)
     Get pointer to distribution object for underlying distribution.

Essential parameters
....................

 -- Function: int unur_distr_corder_set_rank (UNUR_DISTR* DISTRIBUTION,
          int N, int K)
     Change sample size N and rank K of order statistics.  In case of
     invalid data, no parameters are changed.  The area below the PDF
     can be set to that of the underlying distribution by a
     `unur_distr_corder_upd_pdfarea' call.

 -- Function: int unur_distr_corder_get_rank (const UNUR_DISTR*
          DISTRIBUTION, int* N, int* K)
     Get sample size N and rank K of order statistics.  In case of
     error an error code is returned.

Additionally most of the set and get calls for continuous univariate
distributions work. The most important exceptions are that the PDF and
CDF cannot be changed and `unur_distr_cont_upd_mode' uses in any way a
(slow) numerical method that might fail.

 -- Function: UNUR_FUNCT_CONT* unur_distr_corder_get_pdf (UNUR_DISTR*
          DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_corder_get_dpdf (UNUR_DISTR*
          DISTRIBUTION)
 -- Function: UNUR_FUNCT_CONT* unur_distr_corder_get_cdf (UNUR_DISTR*
          DISTRIBUTION)
     Get the respective pointer to the PDF, the derivative of the PDF
     and the CDF of the distribution, respectively. The pointer is of
     type `double funct(double x, UNUR_DISTR *distr)'.  If the
     corresponding function is not available for the distribution, the
     `NULL' pointer is returned.  See also `unur_distr_cont_get_pdf'.
     (Macro)

 -- Function: double unur_distr_corder_eval_pdf (double X, UNUR_DISTR*
          DISTRIBUTION)
 -- Function: double unur_distr_corder_eval_dpdf (double X, UNUR_DISTR*
          DISTRIBUTION)
 -- Function: double unur_distr_corder_eval_cdf (double X, UNUR_DISTR*
          DISTRIBUTION)
     Evaluate the PDF, derivative of the PDF. and the CDF,
     respectively, at X.  Notice that DISTRIBUTION must not be the
     `NULL' pointer.  If the corresponding function is not available
     for the distribution, `UNUR_INFINITY' is returned and `unur_errno'
     is set to `UNUR_ERR_DISTR_DATA'.  See also
     `unur_distr_cont_eval_pdf'.  (Macro)

     _IMPORTANT:_ In the case of a truncated standard distribution
     these calls always return the respective values of the
     _untruncated_ distribution!

 -- Function: int unur_distr_corder_set_pdfparams (UNUR_DISTR*
          DISTRIBUTION, double* PARAMS, int N_PARAMS)
     Set array of parameters for underlying distribution.  See
     `unur_distr_cont_set_pdfparams' for details.  (Macro)

 -- Function: int unur_distr_corder_get_pdfparams (UNUR_DISTR*
          DISTRIBUTION, double** PARAMS)
     Get number of parameters of the PDF of the underlying distribution
     and set pointer PARAMS to array of parameters.  See
     `unur_distr_cont_get_pdfparams' for details.  (Macro)

 -- Function: int unur_distr_corder_set_domain (UNUR_DISTR*
          DISTRIBUTION, double LEFT, double RIGHT)
     Set the left and right borders of the domain of the distribution.
     See `unur_distr_cont_set_domain' for details.  (Macro)

 -- Function: int unur_distr_corder_get_domain (UNUR_DISTR*
          DISTRIBUTION, double* LEFT, double* RIGHT)
     Get the left and right borders of the domain of the distribution.
     See `unur_distr_cont_get_domain' for details.  (Macro)

 -- Function: int unur_distr_corder_get_truncated (UNUR_DISTR*
          DISTRIBUTION, double* LEFT, double* RIGHT)
     Get the left and right borders of the (truncated) domain of the
     distribution.  See `unur_distr_cont_get_truncated' for details.
     (Macro)

Derived parameters
..................

The following paramters *must* be set whenever one of the essential
parameters has been set or changed (and the parameter is required for
the chosen method).

 -- Function: int unur_distr_corder_set_mode (UNUR_DISTR* DISTRIBUTION,
          double MODE)
     Set mode of distribution.  See also `unur_distr_corder_set_mode'.
     (Macro)

 -- Function: double unur_distr_corder_upd_mode (UNUR_DISTR*
          DISTRIBUTION)
     Recompute the mode of the distribution numerically. Notice that
     this routine is slow and might not work properly in every case.
     See also `unur_distr_cont_upd_mode' for further details.  (Macro)

 -- Function: double unur_distr_corder_get_mode (UNUR_DISTR*
          DISTRIBUTION)
     Get mode of distribution.  See `unur_distr_cont_get_mode' for
     details.  (Macro)

 -- Function: int unur_distr_corder_set_pdfarea (UNUR_DISTR*
          DISTRIBUTION, double AREA)
     Set the area below the PDF.  See `unur_distr_cont_set_pdfarea' for
     details.  (Macro)

 -- Function: double unur_distr_corder_upd_pdfarea (UNUR_DISTR*
          DISTRIBUTION)
     Recompute the area below the PDF of the distribution.  It only
     works for order statistics for distribution objects from the
     UNU.RAN library of standard distributions when the corresponding
     function is available.  `unur_distr_cont_upd_pdfarea' assumes that
     the PDF of the underlying distribution is normalized, i.e. it is
     the derivative of its CDF.  Otherwise the computed area is wrong
     and there is *no* warning about this failure.  See
     `unur_distr_cont_upd_pdfarea' for further details.  (Macro)

 -- Function: double unur_distr_corder_get_pdfarea (UNUR_DISTR*
          DISTRIBUTION)
     Get the area below the PDF of the distribution.  See
     `unur_distr_cont_get_pdfarea' for details.  (Macro)


File: unuran.info,  Node: CEMP,  Next: CVEC,  Prev: CORDER,  Up: Distribution_objects

4.4 Continuous empirical univariate distributions
=================================================

Empirical univariate distributions are derived from observed data.
There are two ways to create such a generator object:
  1. By a list of _raw data_ by means of a `unur_distr_cemp_set_data'
     call.

  2. By a _histogram_ (i.e. preprocessed data) by means of a
     `unur_distr_cemp_set_hist' call.
        How these data are used to sample from the empirical
distribution depends from the chosen generation method.

Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_cemp_new (void)
     Create a new (empty) object for empirical univariate continuous
     distribution.

Essential parameters
....................

 -- Function: int unur_distr_cemp_set_data (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* SAMPLE, int N_SAMPLE)
     Set observed sample for empirical distribution.

 -- Function: int unur_distr_cemp_read_data (UNUR_DISTR* DISTRIBUTION,
          const CHAR* FILENAME)
     Read data from file `filename'.  It reads the first number from
     each line.  Numbers are parsed by means of the C standard routine
     `strtod'.  Lines that do not start with `+', `-', `.', or a digit
     are ignored. (Beware of lines starting with a blank!)

     In case of an error (file cannot be opened, invalid string for
     double in line) no data are copied into the distribution object
     and an error code is returned.

 -- Function: int unur_distr_cemp_get_data (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** SAMPLE)
     Get number of samples and set pointer SAMPLE to array of
     observations. If no sample has been given, an error code is
     returned and `sample' is set to `NULL'.

     _Important:_ Do *not* change the entries in SAMPLE!

 -- Function: int unur_distr_cemp_set_hist (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* PROB, int N_PROB, double XMIN, double XMAX)
     Set a histogram with bins of equal width. PROB is an array of
     length N_PROB that contains the probabilities for the bins (in
     ascending order). XMIN and XMAX give the lower and upper bound of
     the histogram, respectively. The bins are assumed to have equal
     width.

     _Remark:_ This is shortcut for calling
     `unur_distr_cemp_set_hist_prob' and
     `unur_distr_cemp_set_hist_domain'.  _Notice:_ All sampling methods
     either use raw data or histogram.  It is possible to set both
     types of data; however, it is not checked whether the given
     histogran corresponds to possibly given raw data.

 -- Function: int unur_distr_cemp_set_hist_prob (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* PROB, int N_PROB)
     Set probabilities of a histogram with N_PROB bins.  Hence PROB
     must be an array of length N_PROB that contains the probabilities
     for the bins in ascending order.  It is important also to set the
     location of the bins either with a
     `unur_distr_cemp_set_hist_domain' for bins of equal width or
     `unur_distr_cemp_set_hist_bins' when the bins have different width.

     _Notice:_ All sampling methods either use raw data or histogram.
     It is possible to set both types of data; however, it is not
     checked whether the given histogram corresponds to possibly given
     raw data.

 -- Function: int unur_distr_cemp_set_hist_domain (UNUR_DISTR*
          DISTRIBUTION, double XMIN, double XMAX)
     Set a domain of a histogram with bins of equal width.  XMIN and
     XMAX give the lower and upper bound of the histogram, respectively.

 -- Function: int unur_distr_cemp_set_hist_bins (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* BINS, int N_BINS)
     Set location of bins of a histogram with N_BINS bins.  Hence BINS
     must be an array of length N_BINS.  The domain of the DISTRIBUTION
     is automatically set by this call and overrides any calls to
     `unur_distr_cemp_set_hist_domain'.  _Important:_ The probabilities
     of the bins of the DISTRIBUTION must be already be set by a
     `unur_distr_cemp_set_hist_prob' (or a `unur_distr_cemp_set_hist'
     call) and the value of N_BINS must equal N_PROB`+1' from the
     corresponding value of the respective call.


File: unuran.info,  Node: CVEC,  Next: CONDI,  Prev: CEMP,  Up: Distribution_objects

4.5 Continuous multivariate distributions
=========================================

The following calls handle multivariate distributions.  However, the
requirements of particular generation methods is not as unique as for
univariate distributions. Moreover, random vector generation methods
are still under development.  The below functions are a first attempt
to handle this situation.

   Notice that some of the parameters - when given carelessly - might
contradict to others. For example: Some methods require the marginal
distribution and some methods need a standardized form of the marginal
distributions, where the actual mean and variance is stored in the mean
vector and the covariance matrix, respectively.

   We also have to mention that some methods might abuse some of the
parameters. Please read the discription of the chosen sampling method
carfully.

   The following kind of calls exists:

   - Create a `new' instance of a continuous multivariate distribution;

   - Handle and evaluate probability density function (PDF, `pdf') and
     the gradient of the density function (`dpdf').  The following is
     important:
        . `pdf' need not be normalized, i.e., any integrable
          nonnegative function can be used.

        . `dpdf' must the derivate of the function provided as `pdf'.

   - Handle and evaluate the logarithm of the probability density
     function (logPDF, `logpdf') and the gradient of the logarithm of
     the density function (`dlogpdf').

     Some methods use the logarithm of the density if available.

   - Set (and change) parameters (`pdfparams') and the volume below the
     graph (`pdfvol') of the given density.

   - Set `mode' and `mean' of the distribution.

   - Set the `center' of the distribution.  It is used by some
     generation methods to adjust the parameters of the generation
     algorithms to gain better performance. It can be seens as the
     location of the "central part" of the distribution.

   - Handle the `covar'iance matrix of the distribution and its
     `cholesky' and `inv'verse matrices.

   - Set the `rankcorr'elation matrix of the distribution.

   - Deal with `marginal' distributions.

   - Set domain of the distribution.


Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_cvec_new (int DIM)
     Create a new (empty) object for multivariate continuous
     distribution. DIM is the number of components of the random vector
     (i.e. its dimension). It is also possible to use dimension 1.
     Notice, however, that this is treated as a distribution of random
     vectors with only one component and not as a distribution of real
     numbers. For the latter `unur_distr_cont_new' should be used to
     create an object for a univariate distribution.

Essential parameters
....................

 -- Function: int unur_distr_cvec_set_pdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CVEC* PDF)
     Set respective pointer to the PDF of the DISTRIBUTION.  This
     function must be of type `double funct(const double *x, UNUR_DISTR
     *distr)', where X must be a pointer to a double array of
     appropriate size (i.e. of the same size as given to the
     `unur_distr_cvec_new' call).

     It is not necessary that the given PDF is normalized, i.e. the
     integral need not be 1.  Nevertheless the volume below the PDF can
     be provided by a `unur_distr_cvec_set_pdfvol' call.

     It is not possible to change the PDF. Once the PDF is set it cannot
     be overwritten. This also holds when the logPDF is given.  A new
     distribution object has to be used instead.

 -- Function: int unur_distr_cvec_set_dpdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_VFUNCT_CVEC* DPDF)
     Set pointer to the gradient of the PDF. The type of this function
     must be `int funct(double *result, const double *x, UNUR_DISTR
     *distr)', where RESULT and X must be pointers to double arrays of
     appropriate size (i.e. of the same size as given to the
     `unur_distr_cvec_new' call).  The gradient of the PDF is stored in
     the array RESULT.  The function should return an error code in
     case of an error and must return `UNUR_SUCCESS' otherwise.

     The given function must be the gradient of the function given by a
     `unur_distr_cvec_set_pdf' call.

     It is not possible to change the gradient of the PDF. Once the dPDF
     is set it cannot be overwritten. This also holds when the gradient
     of the logPDF is given.  A new distribution object has to be used
     instead.

 -- Function: int unur_distr_cvec_set_pdpdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCTD_CVEC* PDPDF)
     Set pointer to partial derivatives of the PDF. The type of this
     function must be `double funct(const double *x, int coord,
     UNUR_DISTR *distr)', where X must be a pointer to a double array
     of appropriate size (i.e. of the same size as given to the
     `unur_distr_cvec_new' call). COORD is the coordinate for which the
     partial dervative should be computed.

     Notice that COORD must be an integer from {0,...,dim-1}.

     It is not possible to change the partial derivative of the PDF.
     Once the pdPDF is set it cannot be overwritten. This also holds
     when the partial derivative of the logPDF is given.  A new
     distribution object has to be used instead.

 -- Function: UNUR_FUNCT_CVEC* unur_distr_cvec_get_pdf (const
          UNUR_DISTR* DISTRIBUTION)
     Get the pointer to the PDF of the DISTRIBUTION. The pointer is of
     type `double funct(const double *x, UNUR_DISTR *distr)'.  If the
     corresponding function is not available for the DISTRIBUTION, the
     `NULL' pointer is returned.

 -- Function: UNUR_VFUNCT_CVEC* unur_distr_cvec_get_dpdf (const
          UNUR_DISTR* DISTRIBUTION)
     Get the pointer to the gradient of the PDF of the DISTRIBUTION.
     The pointer is of type `int double funct(double *result, const
     double *x, UNUR_DISTR *distr)'.  If the corresponding function is
     not available for the DISTRIBUTION, the `NULL' pointer is returned.

 -- Function: double unur_distr_cvec_eval_pdf (const DOUBLE* X,
          UNUR_DISTR* DISTRIBUTION)
     Evaluate the PDF of the DISTRIBUTION at X.  X must be a pointer to
     a double array of appropriate size (i.e. of the same size as given
     to the `unur_distr_cvec_new' call) that contains the vector for
     which the function has to be evaluated.

     Notice that DISTRIBUTION must not be the `NULL' pointer.  If the
     corresponding function is not available for the DISTRIBUTION,
     `UNUR_INFINITY' is returned and `unur_errno' is set to
     `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_cvec_eval_dpdf (double* RESULT, const
          DOUBLE* X, UNUR_DISTR* DISTRIBUTION)
     Evaluate the gradient of the PDF of the DISTRIBUTION at X.  The
     result is stored in the double array RESULT.  Both RESULT and X
     must be pointer to double arrays of appropriate size (i.e. of the
     same size as given to the `unur_distr_cvec_new' call).

     Notice that DISTRIBUTION must not be the `NULL' pointer.  If the
     corresponding function is not available for the DISTRIBUTION, an
     error code is returned and `unur_errno' is set to
     `UNUR_ERR_DISTR_DATA' (RESULT is left unmodified).

 -- Function: double unur_distr_cvec_eval_pdpdf (const DOUBLE* X, int
          COORD, UNUR_DISTR* DISTRIBUTION)
     Evaluate the partial derivative of the PDF of the DISTRIBUTION at
     X for the coordinate COORD.  X must be a pointer to a double array
     of appropriate size (i.e. of the same size as given to the
     `unur_distr_cvec_new' call) that contains the vector for which the
     function has to be evaluated.

     Notice that COORD must be an integer from {0,...,dim-1}.

     Notice that DISTRIBUTION must not be the `NULL' pointer.  If the
     corresponding function is not available for the DISTRIBUTION,
     `UNUR_INFINITY' is returned and `unur_errno' is set to
     `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_cvec_set_logpdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_CVEC* LOGPDF)
 -- Function: int unur_distr_cvec_set_dlogpdf (UNUR_DISTR*
          DISTRIBUTION, UNUR_VFUNCT_CVEC* DLOGPDF)
 -- Function: int unur_distr_cvec_set_pdlogpdf (UNUR_DISTR*
          DISTRIBUTION, UNUR_FUNCTD_CVEC* PDLOGPDF)
 -- Function: UNUR_FUNCT_CVEC* unur_distr_cvec_get_logpdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: UNUR_VFUNCT_CVEC* unur_distr_cvec_get_dlogpdf (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cvec_eval_logpdf (const DOUBLE* X,
          UNUR_DISTR* DISTRIBUTION)
 -- Function: int unur_distr_cvec_eval_dlogpdf (double* RESULT, const
          DOUBLE* X, UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_cvec_eval_pdlogpdf (const DOUBLE* X,
          int COORD, UNUR_DISTR* DISTRIBUTION)
     Analogous calls for the logarithm of the density function.

 -- Function: int unur_distr_cvec_set_mean (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* MEAN)
     Set mean vector for multivariate DISTRIBUTION.  MEAN must be a
     pointer to an array of size `dim', where `dim' is the dimension
     returned by `unur_distr_get_dim'.  A `NULL' pointer for MEAN is
     interpreted as the zero vector (0,...,0).

     *Important:* If the parameters of a distribution from the UNU.RAN
     library of standard distributions (*note Standard distributions:
     Stddist.)  are changed, then neither its mode nor the normalization
     constant are updated. Please use the respective calls
     `unur_distr_cvec_upd_mode' and `unur_distr_cvec_upd_pdfvol'.

 -- Function: const double* unur_distr_cvec_get_mean (const UNUR_DISTR*
          DISTRIBUTION)
     Get the mean vector of the DISTRIBUTION. The function returns a
     pointer to an array of size `dim'.  If the mean vector is not
     marked as known the `NULL' pointer is returned and `unur_errno' is
     set to `UNUR_ERR_DISTR_GET'.

     _Important:_ Do *not* modify the array that holds the mean vector!

 -- Function: int unur_distr_cvec_set_covar (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* COVAR)
     Set covariance matrix for multivariate DISTRIBUTION.  COVAR must
     be a pointer to an array of size `dim' x `dim', where `dim' is the
     dimension returned by `unur_distr_get_dim'.  The rows of the
     matrix have to be stored consecutively in this array.

     COVAR must be a variance-covariance matrix of the DISTRIBUTION,
     i.e. it must be symmetric and positive definit and its diagonal
     entries (i.e. the variance of the components of the random vector)
     must be strictly positive.  The Cholesky factor is computed (and
     stored) to verify the positive definiteness condition.  Notice
     that the inverse of the given covariance matrix is automatically
     computed when it is requested by some routine.  Notice that the
     computation of this inverse matrix is unstable in case of high
     correlations and/or high dimensions. Thus it might fail and
     methods that require this inverse cannot be used.  As an
     alternative the inverse of the covariance matrix can be directly
     set by a `unur_distr_cvec_set_covar_inv' call.

     A `NULL' pointer for COVAR is interpreted as the identity matrix.

     _Important:_ This entry is abused in some methods which do not
     require the covariance matrix. It is then used to perform some
     transformation to obtain better performance.

     _Important:_ In case of an error (e.g. because COVAR is not a
     valid covariance matrix) an error code is returned.  Moreover, the
     covariance matrix is not set and is marked as unknown. A
     previously set covariance matrix is then no longer available.

     *Important:* If the parameters of a distribution from the UNU.RAN
     library of standard distributions (*note Standard distributions:
     Stddist.)  are changed, then neither its mode nor the normalization
     constant are updated. Please use the respective calls
     `unur_distr_cvec_upd_mode' and `unur_distr_cvec_upd_pdfvol'.
     _Remark:_ UNU.RAN does not check whether the an eventually set
     covariance matrix and a rank-correlation matrix do not contradict
     each other.

 -- Function: int unur_distr_cvec_set_covar_inv (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* COVAR_INV)
     Set inverse of the covariance matrix for multivariate DISTRIBUTION.
     COVAR_INV must be a pointer to an array of size `dim' x `dim',
     where `dim' is the dimension returned by `unur_distr_get_dim'.
     The rows of the matrix have to be stored consecutively in this
     array.

     COVAR_INV must be symmetric and positive definit. Only the
     symmetry of the matrix is checked.

     A `NULL' pointer for COVAR_INV is interpreted as the identity
     matrix.

     _Important:_ In case of an error (because COVAR_INV is not
     symetric) an error code is returned.  Moreover, the inverse of the
     covariance matrix is not set and is marked as unknown. A
     previously set inverse matrix is then no longer available.

     _Remark:_ UNU.RAN does not check whether the given matrix is
     positive definit.

     _Remark:_ UNU.RAN does not check whether the matrix COVAR_INV is
     the inverse of the eventually set covariance matrix.

 -- Function: const double* unur_distr_cvec_get_covar (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: const double* unur_distr_cvec_get_cholesky (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: const double* unur_distr_cvec_get_covar_inv (UNUR_DISTR*
          DISTRIBUTION)
     Get covariance matrix of DISTRIBUTION, its Cholesky factor, and
     its inverse, respectively. The function returns a pointer to an
     array of size `dim' x `dim'.  The rows of the matrix are stored
     consecutively in this array.  If the requested matrix is not
     marked as known the `NULL' pointer is returned and `unur_errno' is
     set to `UNUR_ERR_DISTR_GET'.

     _Important:_ Do *not* modify the array that holds the covariance
     matrix!

     _Remark:_ The inverse of the covariance matrix is computed if it
     is not already stored.

 -- Function: int unur_distr_cvec_set_rankcorr (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* RANKCORR)
     Set rank-correlation matrix (Spearman's correlation) for
     multivariate DISTRIBUTION.  RANKCORR must be a pointer to an array
     of size `dim' x `dim', where `dim' is the dimension returned by
     `unur_distr_get_dim'.  The rows of the matrix have to be stored
     consecutively in this array.

     RANKCORR must be a rank-correlation matrix of the DISTRIBUTION,
     i.e. it must be symmetric and positive definite and its diagonal
     entries must be equal to `1'.

     The Cholesky factor is computed (and stored) to verify the
     positive definiteness condition.

     A `NULL' pointer for RANKCORR is interpreted as the identity
     matrix.

     _Important:_ In case of an error (e.g. because RANKCORR is not a
     valid rank-correlation matrix) an error code is returned.
     Moreover, the rank-correlation matrix is not set and is marked as
     unknown. A previously set rank-correlation matrix is then no longer
     available.

     _Remark:_ UNU.RAN does not check whether the an eventually set
     covariance matrix and a rank-correlation matrix do not contradict
     each other.

 -- Function: const double* unur_distr_cvec_get_rankcorr (const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: const double* unur_distr_cvec_get_rk_cholesky (const
          UNUR_DISTR* DISTRIBUTION)
     Get rank-correlation matrix and its cholesky factor, respectively,
     of DISTRIBUTION. The function returns a pointer to an array of
     size `dim' x `dim'.  The rows of the matrix are stored
     consecutively in this array.  If the requested matrix is not
     marked as known the `NULL' pointer is returned and `unur_errno' is
     set to `UNUR_ERR_DISTR_GET'.

     _Important:_ Do *not* modify the array that holds the
     rank-correlation matrix!

 -- Function: int unur_distr_cvec_set_marginals (UNUR_DISTR*
          DISTRIBUTION, UNUR_DISTR* MARGINAL)
     Sets marginal distributions of the given DISTRIBUTION to the same
     MARGINAL distribution object. The MARGINAL distribution must be an
     instance of a continuous univariate distribution object. Notice
     that the marginal distribution is copied into the DISTRIBUTION
     object.

 -- Function: int unur_distr_cvec_set_marginal_array (UNUR_DISTR*
          DISTRIBUTION, UNUR_DISTR** MARGINALS)
     Analogously to the above `unur_distr_cvec_set_marginals' call.
     However, now an array MARGINALS of the pointers to each of the
     marginal distributions must be given. It *must* be an array of
     size `dim', where `dim' is the dimension returned by
     `unur_distr_get_dim'.  _Notice_: Local copies for each of the
     entries are stored in the DISTRIBUTION object. If some of these
     entries are identical (i.e. contain the same pointer), then for
     each of these a new copy is made.

 -- Function: int unur_distr_cvec_set_marginal_list (UNUR_DISTR*
          DISTRIBUTION, ...)
     Similar to the above `unur_distr_cvec_set_marginal_array' call.
     However, now the pointers to the particular marginal distributions
     can be given as parameter and does not require an array of
     pointers. Additionally the given distribution objects are
     immediately destroyed. Thus calls like `unur_distr_normal' can be
     used as arguments.  (With `unur_distr_cvec_set_marginal_array' the
     result of such call has to be stored in a pointer since it has to
     be freed afterwarts to avoid memory leaks!)

     The number of pointers to in the list of function arguments *must*
     be equal to the dimension of the DISTRIBUTION, i.e. the dimension
     returned by `unur_distr_get_dim'.  If one of the given pointer to
     marginal distributions is the `NULL' pointer then the marginal
     distributions of DISTRIBUTION are not set (or previous settings
     are not changed) and an error code is returned.

     *Important:* All distribution objects given in the argument list
     are destroyed!

 -- Function: const UNUR_DISTR* unur_distr_cvec_get_marginal (const
          UNUR_DISTR* DISTRIBUTION, int N)
     Get pointer to the N-th marginal distribution object from the
     given multivariate DISTRIBUTION.  If this does not exist, `NULL'
     is returned.  The marginal distributions are enumerated from `1'
     to `dim', where `dim' is the dimension returned by
     `unur_distr_get_dim'.

 -- Function: int unur_distr_cvec_set_pdfparams (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* PARAMS, int N_PARAMS)
     Sets array of parameters for DISTRIBUTION. There is an upper limit
     for the number of parameters `n_params'. It is given by the macro
     `UNUR_DISTR_MAXPARAMS' in `unuran_config.h'. (It is set to 5 by
     default but can be changed to any appropriate nonnegative number.)
     If N_PARAMS is negative or exceeds this limit no parameters are
     copied into the distribution object and `unur_errno' is set to
     `UNUR_ERR_DISTR_NPARAMS'.

     For standard distributions from the UNU.RAN library the parameters
     are checked. Moreover, the domain is updated automatically.  If
     the given parameters are invalid for the standard distribution,
     then no parameters are set and an error code is returned.  Notice
     that the given parameter list for such a distribution is handled
     in the same way as in the corresponding `new' calls, i.e. optional
     parameters for the PDF that are not present in the given list are
     (re-)set to their default values.

     *Important:* If the parameters of a distribution from the UNU.RAN
     library of standard distributions (*note Standard distributions:
     Stddist.)  are changed, then neither its mode nor the normalization
     constant are updated. Please use the respective calls
     `unur_distr_cvec_upd_mode' and `unur_distr_cvec_upd_pdfvol'.

 -- Function: int unur_distr_cvec_get_pdfparams (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** PARAMS)
     Get number of parameters of the PDF and set pointer PARAMS to
     array of parameters. If no parameters are stored in the object, an
     error code is returned and `params' is set to `NULL'.

     _Important:_ Do *not* change the entries in PARAMS!

 -- Function: int unur_distr_cvec_set_pdfparams_vec (UNUR_DISTR*
          DISTRIBUTION, int PAR, const DOUBLE* PARAM_VEC, int N_PARAMS)
     This function provides an interface for additional vector
     parameters for a multivariate DISTRIBUTION besides mean vector and
     covariance matrix which have their own calls.

     It sets the parameter with number PAR.  PAR indicates directly
     which of the parameters is set and must be a number between `0'
     and `UNUR_DISTR_MAXPARAMS'-1 (the upper limit of possible
     parameters defined in `unuran_config.h'; it is set to 5 but can be
     changed to any appropriate nonnegative number.)

     The entries of a this parameter are given by the array PARAM_VEC
     of size N_PARAMS. Notice that using this interface an An (n x
     m)-matrix has to be stored in an array of length N_PARAMS = n
     times m; where the rows of the matrix are stored consecutively in
     this array.

     Due to great variety of possible parameters for a multivariate
     DISTRIBUTION there is no simpler interface.

     If PARAM_VEC is `NULL' then the corresponding entry is cleared.

     *Important:* If the parameters of a distribution from the UNU.RAN
     library of standard distributions (*note Standard distributions:
     Stddist.)  are changed, then neither its mode nor the normalization
     constant are updated. Please use the respective calls
     `unur_distr_cvec_upd_mode' and `unur_distr_cvec_upd_pdfvol'.  If
     an error occurs no parameters are copied into the parameter object
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_cvec_get_pdfparams_vec (const UNUR_DISTR*
          DISTRIBUTION, int PAR, const DOUBLE** PARAM_VECS)
     Get parameter of the PDF with number PAR.  The pointer to the
     parameter array is stored in PARAM_VECS, its size is returned by
     the function.  If the requested parameter is not set, then an
     error code is returned and `params' is set to `NULL'.

     _Important:_ Do *not* change the entries in PARAM_VECS!

 -- Function: int unur_distr_cvec_set_domain_rect (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* LOWERLEFT, const DOUBLE*
          UPPERRIGHT)
     Set rectangular domain for DISTRIBUTION with LOWERLEFT and
     UPPERRIGHT vertices. Both must be pointer to an array of the size
     returned by `unur_distr_get_dim'.  A `NULL' pointer is interpreted
     as the zero vector (0,...,0).  For setting a coordinate of the
     boundary to +/- infinity use `+/- UNUR_INFINITY'.  The LOWERLEFT
     vertex must be strictly smaller than UPPERRIGHT in each component.
     Otherwise no domain is set and `unur_errno' is set to
     `UNUR_ERR_DISTR_SET'.

     By default the domain of a distribution is unbounded. Thus one can
     use this call to truncate an existing distribution.

     _Important:_ Changing the domain of DISTRIBUTION marks derived
     parameters like the mode or the center as unknown and must be set
     _after_ changing the domain. This is important for the already set
     (or default) value for the center does not fall into the given
     domain.  Notice that calls of the PDF and derived functions return
     `0.' when the parameter is not contained in the domain.

 -- Function: int unur_distr_cvec_is_indomain (const DOUBLE* X, const
          UNUR_DISTR* DISTRIBUTION)
     Check whether X falls into the domain of DISTRIBUTION.

Derived parameters
..................

The following paramters *must* be set whenever one of the essential
parameters has been set or changed (and the parameter is required for
the chosen method).

 -- Function: int unur_distr_cvec_set_mode (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* MODE)
     Set mode of the DISTRIBUTION. MODE must be a pointer to an array
     of the size returned by `unur_distr_get_dim'.  A `NULL' pointer
     for MODE is interpreted as the zero vector (0,...,0).

 -- Function: int unur_distr_cvec_upd_mode (UNUR_DISTR* DISTRIBUTION)
     Recompute the mode of the DISTRIBUTION. This call works properly
     for distribution objects from the UNU.RAN library of standard
     distributions when the corresponding function is available. If it
     failes `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

 -- Function: const double* unur_distr_cvec_get_mode (UNUR_DISTR*
          DISTRIBUTION)
     Get mode of the DISTRIBUTION. The function returns a pointer to an
     array of the size returned by `unur_distr_get_dim'.  If the mode
     is not marked as known the `NULL' pointer is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_GET'.  (There is no
     difference between the case where no routine for computing the
     mode is available and the case where no mode exists for the
     DISTRIBUTION at all.)

     _Important:_ Do *not* modify the array that holds the mode!

 -- Function: int unur_distr_cvec_set_center (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* CENTER)
     Set center of the DISTRIBUTION. CENTER must be a pointer to an
     array of the size returned by `unur_distr_get_dim'.  A `NULL'
     pointer for CENTER is interpreted as the zero vector (0,...,0).

     The center is used by some methods to shift the distribution in
     order to decrease numerical round-off error.  If not given
     explicitly a default is used.  Moreover, it is used as starting
     point for several numerical search algorithm (e.g. for the mode).
     Then CENTER must be a pointer where the call to the PDF returns a
     non-zero value.  In particular CENTER must contained in the domain
     of the distribution.

     Default: The mode, if given by a `unur_distr_cvec_set_mode' call;
     else the mean, if given by a `unur_distr_cvec_set_mean' call;
     otherwise the null vector (0,...,0).

 -- Function: const double* unur_distr_cvec_get_center (UNUR_DISTR*
          DISTRIBUTION)
     Get center of the DISTRIBUTION. The function returns a pointer to
     an array of the size returned by `unur_distr_get_dim'.  It always
     returns some point as there always exists a default for the
     center, see `unur_distr_cvec_set_center'.  _Important:_ Do *not*
     modify the array that holds the center!

 -- Function: int unur_distr_cvec_set_pdfvol (UNUR_DISTR* DISTRIBUTION,
          double VOLUME)
     Set the volume below the PDF. If VOL is non-positive, no volume is
     set and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

 -- Function: int unur_distr_cvec_upd_pdfvol (UNUR_DISTR* DISTRIBUTION)
     Recompute the volume below the PDF of the distribution.  It only
     works for distribution objects from the UNU.RAN library of
     standard distributions when the corresponding function is
     available. Otherwise `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     This call also sets the normalization constant such that the given
     PDF is the derivative of a given CDF, i.e. the volume is 1.

 -- Function: double unur_distr_cvec_get_pdfvol (UNUR_DISTR*
          DISTRIBUTION)
     Get the volume below the PDF of the DISTRIBUTION. If this volume is
     not known,
     `unur_distr_cont_upd_pdfarea' is called to compute it. If this is
     not successful `UNUR_INFINITY' is returned and `unur_errno' is set
     to `UNUR_ERR_DISTR_GET'.


File: unuran.info,  Node: CONDI,  Next: CVEMP,  Prev: CVEC,  Up: Distribution_objects

4.6 Continuous univariate full conditional distribution
=======================================================

Full conditional distribution for a given continuous multivariate
distributiion. The condition is a position vector and either a variable
that is variated or a vector that indicates the direction on which the
random vector can variate.

   There is a subtle difference between using direction vector and
using the K-th variable.  When a direction vector is given the PDF of
the conditional distribution is defined by f(t) = PDF(pos + t * dir).
When a variable is selected the full conditional distribution with all
other variables fixed is used.

   This is a special case of a continuous univariate distribution and
thus they have most of these parameters (with the exception that
functions cannot be changed). Additionally,

   - there is a call to extract the underlying multivariate
     distribution,

   - and a call to handle the variables that are fixed and the
     direction for changing the random vector.


   This distibution type is primarily used for evaluation the
conditional distribution and its derivative (as required for, e.g., the
Gibbs sampler). The density is not normalized (i.e. does not integrate
to one). Mode and area are not available and it does not make sense to
use any call to set or change parameters except the ones given below.

Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_condi_new (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* POS, const DOUBLE* DIR, int K)
     Create an object for full conditional distribution for the given
     DISTRIBUTION. The condition is given by a position vector POS and
     either the K-th variable that is variated or the vector DIR that
     contains the direction on which the random vector can variate.

     DISTRIBUTION must be a pointer to a multivariate continuous
     distribution.  POS must be a pointer to an array of size `dim',
     where `dim' is the dimension of the underlying distribution object.
     DIR must be a pointer to an array if size `dim' or `NULL'.  K must
     be in the range `0, ..., dim-1'.  If the K-th variable is used,
     DIR must be set to `NULL'.

     _Notice:_ There is a subtle difference between using direction
     vector DIR and using the K-th variable.  When DIR is given, the
     current position POS is mapped into 0 of the conditional
     distribution and the derivative is taken from the function
     PDF(POS+t*DIR) w.r.t. t.  On the other hand, when the coordinate K
     is used (i.e., when DIR is set to `NULL'), the full conditional
     distribution of the distribution is considered (as used for the
     Gibbs sampler).  In particular, the current point is just
     projected into the one-dimensional subspace without mapping it
     into the point 0.

     _Notice:_ If a coordinate K is used, then the K-th partial
     derivative is used if it as available. Otherwise the gradient is
     computed and the K-th component is returned.

     The resulting generator object is of the same type as of a
     `unur_distr_cont_new' call.

 -- Function: int unur_distr_condi_set_condition (struct UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* POS, const DOUBLE* DIR, int K)
     Set/change condition for conditional DISTRIBUTION.  Change values
     of fixed variables to POS and use direction DIR or K-th variable
     of conditional DISTRIBUTION.

     POS must be a pointer to an array of size `dim', where `dim' is
     the dimension of the underlying distribution object.  DIR must be
     a pointer to an array if size `dim' or `NULL'.  K must be in the
     range `0, ..., dim-1'.  If the K-th variable is used, DIR must be
     set to `NULL'.

     _Notice:_ There is a subtle difference between using direction
     vector DIR and using the K-th variable.  When DIR is given, the
     current position POS is mapped into 0 of the conditional
     distribution and the derivative is taken from the function
     PDF(POS+t*DIR) w.r.t. t.  On the other hand, when the coordinate K
     is used (i.e., when DIR is set to `NULL'), the full conditional
     distribution of the distribution is considered (as used for the
     Gibbs sampler).  In particular, the current point is just
     projected into the one-dimensional subspace without mapping it
     into the point 0.

 -- Function: int unur_distr_condi_get_condition (struct UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** POS, const DOUBLE** DIR, int* K)
     Get condition for conditional DISTRIBUTION.  The values for the
     fixed variables are stored in POS, which must be a pointer to an
     array of size `dim'.  The condition is stored in DIR and K,
     respectively.

     _Important:_ Do *not* change the entries in POS and DIR!

 -- Function: const UNUR_DISTR* unur_distr_condi_get_distribution
          (const UNUR_DISTR* DISTRIBUTION)
     Get pointer to distribution object for underlying distribution.


File: unuran.info,  Node: CVEMP,  Next: MATR,  Prev: CONDI,  Up: Distribution_objects

4.7 Continuous empirical multivariate distributions
===================================================

Empirical multivariate distributions are just lists of vectors (with
the same dimension).  Thus there are only calls to insert these data.
How these data are used to sample from the empirical distribution
depends from the chosen generation method.

Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_cvemp_new (int DIM)
     Create a new (empty) object for an empirical multivariate
     continuous distribution. DIM is the number of components of the
     random vector (i.e. its dimension). It must be at least 2;
     otherwise `unur_distr_cemp_new' should be used to create an object
     for an empirical univariate distribution.

Essential parameters
....................

 -- Function: int unur_distr_cvemp_set_data (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* SAMPLE, int N_SAMPLE)
     Set observed sample for empirical DISTRIBUTION.  SAMPLE is an
     array of doubles of size `dim' x N_SAMPLE, where `dim' is the
     dimension of the DISTRIBUTION returned by `unur_distr_get_dim'.
     The data points must be stored consecutively in SAMPLE, i.e., data
     points (x1, y1), (x2, y2), ... are given as an array {x1, y1, x2,
     y2, ...}.

 -- Function: int unur_distr_cvemp_read_data (UNUR_DISTR* DISTRIBUTION,
          const CHAR* FILENAME)
     Read data from file `filename'.  It reads the first `dim' numbers
     from each line, where `dim' is the dimension of the DISTRIBUTION
     returned by `unur_distr_get_dim'.  Numbers are parsed by means of
     the C standard routine `strtod'.  Lines that do not start with
     `+', `-', `.', or a digit are ignored. (Beware of lines starting
     with a blank!)

     In case of an error (file cannot be opened, too few entries in a
     line, invalid string for double in line) no data are copied into
     the distribution object and an error code is returned.

 -- Function: int unur_distr_cvemp_get_data (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** SAMPLE)
     Get number of samples and set pointer SAMPLE to array of
     observations. If no sample has been given, an error code is
     returned and SAMPLE is set to `NULL'.  If successful SAMPLE points
     to an array of length `dim' x `n_sample', where `dim' is the
     dimension of the distribution returned by `unur_distr_get_dim' and
     `n_sample' the return value of the function.

     _Important:_ Do *not* modify the array SAMPLE.


File: unuran.info,  Node: MATR,  Next: DISCR,  Prev: CVEMP,  Up: Distribution_objects

4.8 MATRix distributions
========================

Distributions for random matrices. Notice that UNU.RAN uses arrays of
`double's to handle matrices. The rows of the matrix are stored
consecutively.

Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_matr_new (int N_ROWS, int N_COLS)
     Create a new (empty) object for a matrix distribution. N_ROWS and
     N_COLS are the respective numbers of rows and columns of the
     random matrix (i.e. its dimensions). It is also possible to have
     only one number or rows and/or columns.  Notice, however, that
     this is treated as a distribution of random matrices with only one
     row or column or component and not as a distribution of vectors or
     real numbers. For the latter `unur_distr_cont_new' or
     `unur_distr_cvec_new' should be used to create an object for a
     univariate distribution and a multivariate (vector) distribution,
     respectively.

Essential parameters
....................

 -- Function: int unur_distr_matr_get_dim (const UNUR_DISTR*
          DISTRIBUTION, int* N_ROWS, int* N_COLS)
     Get number of rows and columns of random matrix (its dimension).
     It returns the total number of components. If successfull
     `UNUR_SUCCESS' is returned.


File: unuran.info,  Node: DISCR,  Prev: MATR,  Up: Distribution_objects

4.9 Discrete univariate distributions
=====================================

The calls in this section can be applied to discrete univariate
distributions.

   - Create a `new' instance of a discrete univariate distribution.

   - Handle and evaluate distribution function (CDF, `cdf') and
     probability mass function (PMF, `pmf').  The following is
     important:
        . `pmf' need not be normalized, i.e., any summable nonnegative
          function on the set of intergers can be used.

        . `cdf' must be a distribution function, i.e. it must be
          monotonically increasing with range [0,1].

        . If `cdf' and `pdf' are used together for a pariticular
          generation method, then `pmf' must be normalized, i.e. it
          must sum to 1.

   - Alternatively, `cdf' and `pdf' can be provided as `str'ings
     instead of function pointers.

   - Some generation methods require a (finite) probability vector (PV,
     `pv'), i.e. an array of `double's.  It can be automatically
     computed if the `pmf' is given but `pv' is not.

   - Set (and change) parameters (`pmfparams') and the total sum
     (`pmfsum') of the given PMF or PV.

   - Set the `mode' of the distribution.

   - Set the `domain' of the distribution.


Function reference
------------------

 -- Function: UNUR_DISTR* unur_distr_discr_new (void)
     Create a new (empty) object for a univariate discrete distribution.

Essential parameters
....................

There are two interfaces for discrete univariate distributions: Either
provide a (finite) probability vector (PV).  Or provide a probability
mass function (PMF). For the latter case there are also a couple of
derived parameters that are not required when a PV is given.

   It is not possible to set both a PMF and a PV directly. However, the
PV can be computed from the PMF (or the CDF if no PMF is available) by
means of a `unur_distr_discr_make_pv' call.  If both the PV and the PMF
are given in the distribution object it depends on the generation
method which of these is used.

 -- Function: int unur_distr_discr_set_pv (UNUR_DISTR* DISTRIBUTION,
          const DOUBLE* PV, int N_PV)
     Set finite probability vector (PV) for the DISTRIBUTION. It is not
     necessary that the entries in the given PV sum to 1.  N_PV must be
     positive. However, there is no testing whether all entries in PV
     are non-negative.

     If no domain has been set, then the left boundary is set to `0',
     by default. If N_PV is too large, e.g. because left boundary +
     N_PV exceeds the range of integers, then the call fails.

     Notice that it is not possible to set both a PV and a PMF or CDF.
     If the PMF or CDF is set first one cannot set the PV.  If the PMF
     or CDF is set first after a PV is set, the latter is removed (and
     recomputed using `unur_distr_discr_make_pv' when required).

 -- Function: int unur_distr_discr_make_pv (UNUR_DISTR* DISTRIBUTION)
     Compute a PV when a PMF or CDF is given. However, when the domain
     is not given or is too large and the sum over the PMF is given
     then the (right) tail of the DISTRIBUTION is chopped off such that
     the probability for the tail region is less than 1.e-8.  If the
     sum over the PMF is not given a PV of maximal length is computed.

     The maximal size of the created PV is bounded by the macro
     `UNUR_MAX_AUTO_PV' that is defined in `unuran_config.h'.

     If successful, the length of the generated PV is returned.  If the
     sum over the PMF on the chopped tail is not neglible small (i.e.
     greater than 1.e-8 or unknown) than the negative of the length of
     the PV is returned and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

     Notice that the left boundary of the PV is set to `0' by default
     when a discrete distribution object is created from scratch.

     If computing a PV fails for some reasons, an error code is
     returned and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

 -- Function: int unur_distr_discr_get_pv (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** PV)
     Get length of PV of the DISTRIBUTION and set pointer PV to array
     of probabilities. If no PV is given, an error code is returned and
     PV is set to `NULL'.
     (It does not call `unur_distr_discr_make_pv' !)

 -- Function: int unur_distr_discr_set_pmf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_DISCR* PMF)
 -- Function: int unur_distr_discr_set_cdf (UNUR_DISTR* DISTRIBUTION,
          UNUR_FUNCT_DISCR* CDF)
     Set respective pointer to the PMF and the CDF of the DISTRIBUTION.
     These functions must be of type `double funct(int k, const
     UNUR_DISTR *distr)'.

     It is important to note that all these functions must return a
     result for all integers K. E.g., if the domain of a given PMF is
     the interval {1,2,3,...,100}, than the given function must return
     `0.0' for all points outside this interval.

     The default domain for the PMF or CDF is [`0', `INT_MAX'].  The
     domain can be changed using a `unur_distr_discr_set_domain' call.

     It is not possible to change such a function. Once the PMF or CDF
     is set it cannot be overwritten. A new distribution object has to
     be used instead.

     Notice that it is not possible to set both a PV and a PMF or CDF.
     If the PMF or CDF is set first one cannot set the PV.  If the PMF
     or CDF is set first after a PV is set, the latter is removed (and
     recomputed using `unur_distr_discr_make_pv' when required).

 -- Function: int unur_distr_discr_set_invcdf (UNUR_DISTR*
          DISTRIBUTION, UNUR_IFUNCT_DISCR* INVCDF)
     Set inverse CDF of the DISTRIBUTION.  INVCDF must be a pointer
     must be of type `int funct(double x, const UNUR_DISTR *distr)',
     i.e., it should return a `double'.

 -- Function: double unur_distr_discr_eval_pv (int K, const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: double unur_distr_discr_eval_pmf (int K, const
          UNUR_DISTR* DISTRIBUTION)
 -- Function: double unur_distr_discr_eval_cdf (int K, const
          UNUR_DISTR* DISTRIBUTION)
     Evaluate the PV, PMF, and the CDF, respectively, at k.  Notice
     that DISTRIBUTION must not be the `NULL' pointer.  If no PV is set
     for the DISTRIBUTION, then `unur_distr_discr_eval_pv' behaves like
     `unur_distr_discr_eval_pmf'.  If the corresponding function is not
     available for the DISTRIBUTION, `UNUR_INFINITY' is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     _IMPORTANT:_ In the case of a truncated standard distribution
     these calls always return the respective values of the
     _untruncated_ distribution!

 -- Function: int unur_distr_discr_eval_invcdf (double U, const
          UNUR_DISTR* DISTRIBUTION)
     Evaluate the inverse CDF at U.  Notice that DISTRIBUTION must not
     be the `NULL' pointer.  If the corresponding function is not
     available for the distribution, `INT_MAX' is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     _IMPORTANT:_ In the case of a truncated standard distribution
     these calls always return the respective values of the
     _untruncated_ distribution!

 -- Function: int unur_distr_discr_set_pmfstr (UNUR_DISTR*
          DISTRIBUTION, const CHAR* PMFSTR)
     This function provides an alternative way to set a PMF of the
     DISTRIBUTION.  PMFSTR is a character string that contains the
     formula for the PMF, see *note Function String: StringFunct, for
     details.  See also the remarks for the `unur_distr_discr_set_pmf'
     call.

     It is not possible to call this funtion twice or to call this
     function after a `unur_distr_discr_set_pmf' call.

 -- Function: int unur_distr_discr_set_cdfstr (UNUR_DISTR*
          DISTRIBUTION, const CHAR* CDFSTR)
     This function provides an alternative way to set a CDF; analogously
     to the `unur_distr_discr_set_pmfstr' call.

 -- Function: char* unur_distr_discr_get_pmfstr (const UNUR_DISTR*
          DISTRIBUTION)
 -- Function: char* unur_distr_discr_get_cdfstr (const UNUR_DISTR*
          DISTRIBUTION)
     Get pointer to respective string for PMF and CDF of DISTRIBUTION
     that is given via the string interface.  This call allocates
     memory to produce this string. It should be freed when it is not
     used any more.

 -- Function: int unur_distr_discr_set_pmfparams (UNUR_DISTR*
          DISTRIBUTION, const DOUBLE* PARAMS, int N_PARAMS)
     Set array of parameters for DISTRIBUTION. There is an upper limit
     for the number of parameters N_PARAMS. It is given by the macro
     `UNUR_DISTR_MAXPARAMS' in `unuran_config.h'. (It is set to 5 but
     can be changed to any appropriate nonnegative number.)  If
     N_PARAMS is negative or exceeds this limit no parameters are
     copied into the DISTRIBUTION object and `unur_errno' is set to
     `UNUR_ERR_DISTR_NPARAMS'.

     For standard distributions from the UNU.RAN library the parameters
     are checked. Moreover, the domain is updated automatically unless
     it has been changed before by a `unur_distr_discr_set_domain' call.
     If the given parameters are invalid for the standard distribution,
     then no parameters are set and an error code is returned.  Notice
     that the given parameter list for such a distribution is handled
     in the same way as in the corresponding `new' calls, i.e. optional
     parameters for the PDF that are not present in the given list are
     (re-)set to their default values.

     _Important:_ Integer parameter must be given as `double's.

 -- Function: int unur_distr_discr_get_pmfparams (const UNUR_DISTR*
          DISTRIBUTION, const DOUBLE** PARAMS)
     Get number of parameters of the PMF and set pointer PARAMS to
     array of parameters. If no parameters are stored in the object, an
     error code is returned and `params' is set to `NULL'.

 -- Function: int unur_distr_discr_set_domain (UNUR_DISTR*
          DISTRIBUTION, int LEFT, int RIGHT)
     Set the left and right borders of the domain of the DISTRIBUTION.
     This can also be used to truncate an existing distribution. For
     setting the boundary to +/- infinity use `INT_MIN' and `INT_MAX',
     respectively.  If RIGHT is not strictly greater than LEFT no domain
     is set and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.  It is
     allowed to use this call to increase the domain.  If the PV of the
     discrete distribution is used, than the right boudary is ignored
     (and internally set to LEFT + size of PV - 1).  Notice that
     `INT_MIN' and `INT_MAX' are interpreted as (minus/plus) infinity.

     Default: [`0', `INT_MAX'].

 -- Function: int unur_distr_discr_get_domain (const UNUR_DISTR*
          DISTRIBUTION, int* LEFT, int* RIGHT)
     Get the left and right borders of the domain of the DISTRIBUTION.
     If the domain is not set explicitly the interval [`INT_MIN',
     `INT_MAX'] is assumed and returned.  When a PV is given then the
     domain is set automatically to [`0',size of PV - 1].

Derived parameters
..................

The following paramters *must* be set whenever one of the essential
parameters has been set or changed (and the parameter is required for
the chosen method).

 -- Function: int unur_distr_discr_set_mode (UNUR_DISTR* DISTRIBUTION,
          int MODE)
     Set mode of DISTRIBUTION.

 -- Function: int unur_distr_discr_upd_mode (UNUR_DISTR* DISTRIBUTION)
     Recompute the mode of the DISTRIBUTION. This call works properly
     for distribution objects from the UNU.RAN library of standard
     distributions when the corresponding function is available.
     Otherwise a (slow) numerical mode finder is used. It only works
     properly for unimodal probability mass functions. If it failes
     `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

 -- Function: int unur_distr_discr_get_mode (UNUR_DISTR* DISTRIBUTION)
     Get mode of DISTRIBUTION. If the mode is not marked as known,
     `unur_distr_discr_upd_mode' is called to compute the mode. If this
     is not successful `INT_MAX' is returned and `unur_errno' is set to
     `UNUR_ERR_DISTR_GET'.  (There is no difference between the case
     where no routine for computing the mode is available and the case
     where no mode exists for the distribution at all.)

 -- Function: int unur_distr_discr_set_pmfsum (UNUR_DISTR*
          DISTRIBUTION, double SUM)
     Set the sum over the PMF. If `sum' is non-positive, no sum is set
     and `unur_errno' is set to `UNUR_ERR_DISTR_SET'.

     For a distribution object created by the UNU.RAN library of
     standard distributions you always should use the
     `unur_distr_discr_upd_pmfsum'.  Otherwise there might be ambiguous
     side-effects.

 -- Function: int unur_distr_discr_upd_pmfsum (UNUR_DISTR* DISTRIBUTION)
     Recompute the sum over the PMF of the DISTRIBUTION.  In most cases
     the normalization constant is recomputed and thus the sum is 1.
     This call works for distribution objects from the UNU.RAN library
     of standard distributions when the corresponding function is
     available. When a PV, a PMF with finite domain, or a CDF is given,
     a simple generic function which uses a naive summation loop is
     used. If this computation is not possible, an error code is
     returned and `unur_errno' is set to `UNUR_ERR_DISTR_DATA'.

     The call does not work for distributions from the UNU.RAN library
     of standard distributions with truncated domain when the CDF is
     not available.

 -- Function: double unur_distr_discr_get_pmfsum (UNUR_DISTR*
          DISTRIBUTION)
     Get the sum over the PMF of the DISTRIBUTION. If this sum is not
     known, `unur_distr_discr_upd_pmfsum' is called to compute it. If
     this is not successful `UNUR_INFINITY' is returned and
     `unur_errno' is set to `UNUR_ERR_DISTR_GET'.


File: unuran.info,  Node: Methods,  Next: URNG,  Prev: Distribution_objects,  Up: Top

5 Methods for generating non-uniform random variates
****************************************************

* Menu:

* Methods_all:: Routines for all generator objects
* AUTO:: Select method automatically
* Methods_for_CONT:: Methods for continuous univariate distributions
* Methods_for_CEMP:: Methods for continuous empirical univariate distributions
* Methods_for_CVEC:: Methods for continuous multivariate distributions
* MCMC_Methods_for_CVEC:: Markov chain samplers for continuous multivariate distributions
* Methods_for_CVEMP:: Methods for continuous empirical multivariate distributions
* Methods_for_DISCR:: Methods for discrete univariate distributions
* Methods_for_MATR:: Methods for random matrices
* Methods_for_UNID:: Methods for uniform univariate distributions
* Meta_Methods:: Meta Methods for univariate distributions

   Sampling from a particular distribution with UNU.RAN requires the
following steps:

  1. Create a distribution object (*note Handling distribution objects:
     Distribution_objects.).

  2. Select a method and create a parameter object.

  3. Initizialize the generator object using `unur_init'.

     _Important_: Initialization of the generator object might fail.
     `unur_init' returns a `NULL' pointer then, which *must* not be
     used for sampling.

  4. Draw a sample from the generator object using the corresponding
     sampling function (depending on the type of distribution:
     univariate continuous, univariate discrete, multivariate
     continuous, and random matrix).

  5. It is possible for a generator object to change the parameters and
     the domain of the underlying distribution. This must be done by
     extracting this object by means of a `unur_get_distr' call and
     changing the distribution using the correspondig set calls, see
     *note Handling distribution objects: Distribution_objects.  The
     generator object *must* then be reinitialized by means of the
     `unur_reinit' call.

     _Important_: Currently not all methods allow reinitialization, see
     the description of the particular method (keyword Reinit).

     _Important_: Reinitialization of the generator object might fail.
     Thus one *must* check the return code of the `unur_reinit' call.

     _Important_: When reinitialization fails then sampling routines
     always return INFINITY (for continuous distributions) or `0' (for
     discrete distributions), respectively.  However, it is still
     possible to change the underlying distribution and try to
     reinitialize again.



File: unuran.info,  Node: Methods_all,  Next: AUTO,  Up: Methods

5.1 Routines for all generator objects
======================================

Routines for all generator objects.

Function reference
------------------

 -- Function: UNUR_GEN* unur_init (UNUR_PAR* PARAMETERS)
     Initialize a generator object. All necessary information must be
     stored in the parameter object.

     *Important:* If an error has occurred a `NULL' pointer is return.
     This must not be used for the sampling routines (this causes a
     segmentation fault).

     *Always* check whether the call was successful or not!

     _Important:_ This call destroys the PARAMETER object
     automatically. Thus it is not necessary/allowed to free it.

 -- Function: int unur_reinit (UNUR_GEN* GENERATOR)
     Update an existing generator object after the underlying
     distribution has been modified (using `unur_get_distr' together
     with corresponding set calls.  It *must* be executed before
     sampling using this generator object is continued as otherwise it
     produces an invalid sample or might even cause a segmentation
     fault.

     _Important_: Currently not all methods allow reinitialization, see
     the description of the particular method (keyword Reinit).

     _Important_: Reinitialization of the generator object might fail.
     Thus one *must* check the return code:

    `UNUR_SUCCESS (0x0u)'
          success (no error)

    `UNUR_ERR_NO_REINIT'
          reinit routine not implemented.

    other values
          some error has occured while trying to reinitialize the
          generator object.

     _Important_: When reinitialization fails then sampling routines
     always return INFINITY (for continuous distributions) or `0' (for
     discrete distributions), respectively.  However, it is still
     possible to change the underlying distribution and try to
     reinitialize again.

     _Important_: When one tries to run `unur_reinit', but
     reinitialization is not implemented, then the generator object
     cannot be used any more and must be destroyed and a new one has to
     be built from scratch.

 -- Function: int    unur_sample_discr (UNUR_GEN* GENERATOR)
 -- Function: double unur_sample_cont (UNUR_GEN* GENERATOR)
 -- Function: int    unur_sample_vec (UNUR_GEN* GENERATOR, double*
          VECTOR)
 -- Function: int    unur_sample_matr (UNUR_GEN* GENERATOR, double*
          MATRIX)
     Sample from generator object. The three routines depend on the type
     of the generator object (discrete or continuous univariate
     distribution, multivariate distribution, or random matrix).

     _Notice:_ UNU.RAN uses arrays of `double's to handle matrices.
     There the rows of the matrix are stored consecutively.

     _Notice:_ The routines `unur_sample_vec' and `unur_sample_matr'
     return `UNUR_SUCCESS' if generation was successful and some error
     code otherwise.

     *Important:* These routines do *not* check whether GENERATOR is an
     invalid `NULL' pointer.

 -- Function: double unur_quantile (UNUR_GEN* GENERATOR, double U)
     Compute the U quantile of a continuous distribution using a
     GENERATOR object that implements an (approximate) inversion
     methods.

     The following methods are currently available:
        * HINV, *note HINV::.

        * NINV, *note NINV::.

        * PINV, *note PINV::.

        * CSTD, *note CSTD::.
          This requires that GENERATOR implements an inversion method.

        * DGT, *note DGT::.
          The return value is (of course) type casted to `double'.

     *Important:* This routine does *not* check whether GENERATOR is an
     invalid `NULL' pointer.

     In case of an error UNUR_INFINITY or INT_MAX (depending on the
     type of GENERATOR) is returned.

 -- Function: void  unur_free (UNUR_GEN* GENERATOR)
     Destroy (free) the given generator object.

 -- Function: const char* unur_gen_info (UNUR_GEN* GENERATOR, int HELP)
     Get a string with informations about the given GENERATOR.  These
     informations allow some fine tuning of the generation method.  If
     HELP is `TRUE', some hints on setting parameters are given.

     This function is intented for using in interactive environments
     (like R).

     If an error occurs, then `NULL' is returned.

 -- Function: int unur_get_dimension (const UNUR_GEN* GENERATOR)
     Get the number of dimension of a (multivariate) distribution.  For
     a univariate distribution `1' is return.

 -- Function: const char* unur_get_genid (const UNUR_GEN* GENERATOR)
     Get identifier string for generator.

 -- Function: UNUR_DISTR* unur_get_distr (const UNUR_GEN* GENERATOR)
     Get pointer to distribution object from generator object.  This
     function can be used to change the parameters of the distribution
     and reinitialize the generator object.  Notice that currently *not
     all* generating methods have a reinitialize routine.  This
     function should be used with extreme care. Changing the
     distribution is changed and using the generator object without
     reinitializing might cause wrong samples or segmentation faults.
     Moreover, if the corresponding generator object is freed, the
     pointer must not be used.

     *Important:* The returned distribution object must not be freed.
     If the distribution object is changed then one *must* run
     `unur_reinit' !

 -- Function: int unur_set_use_distr_privatecopy (UNUR_PAR* PARAMETERS,
          int USE_PRIVATECOPY)
     Set flag whether the generator object should make a private copy of
     the given distribution object or just stores the pointer to this
     distribution object. Values for USE_PRIVATECOPY:
    ``TRUE''
          make a private copy (default)

    ``FALSE''
          do not make a private copy and store pointer to given
          (external) distribution object.

     By default, generator objects keep their own private copy of the
     given distribution object. Thus the generator object can be handled
     independently from other UNU.RAN objects (with uniform random
     number generators as the only exception). When the generator
     object is initialized the given distribution object is cloned and
     stored.

     However, in some rare situations it can be useful when only the
     pointer to the given distribution object is stored without making a
     private copy. A possible example is when only one random variate
     has to be drawn from the distribution.  This behavior can be
     achieved when USE_LOCALCOPY is set to `FALSE'.

     *Warning!* Using a pointer to the external distribution object
     instead of a private copy must be done with *extreme care*!  When
     the distrubtion object is changed or freed then the generator
     object does not work any more, might case a segmentation fault, or
     (even worse) produces garbage.  On the other hand, when the
     generator object is initialized or used to draw a random sampling
     the distribution object may be changed.

     _Notice:_ The prototypes of all `unur_<method>_new' calls use a
     `const' qualifier for the distribution argument.  However, if
     USE_PRIVATECOPY is set to `FALSE' this qualifier is discarded and
     the distribution might be changed.

     *Important!* If USE_LOCALCOPY is set to `FALSE' and the
     corresponding distribution object is changed then one must run
     `unur_reinit' on the generator object.  (Notice that currently not
     all generation methods support reinitialization.)

     Default: USE_PRIVATECOPY is `TRUE'.


File: unuran.info,  Node: AUTO,  Next: Methods_for_CONT,  Prev: Methods_all,  Up: Methods

5.2 AUTO  -  Select method automatically
========================================

AUTO selects a an appropriate method for the given distribution object
automatically. There are no parameters for this method, yet. But it is
planned to give some parameter to describe the task for which the
random variate generator is used for and thus make the choice of the
generating method more appropriate.  Notice that the required sampling
routine for the generator object depends on the type of the given
distribution object.

   The chosen method also depends on the sample size for which the
generator object will be used. If only a few random variates the order
of magnitude of the sample size should be set via a
`unur_auto_set_logss' call.

   IMPORTANT: This is an experimental version and the method chosen may
change in future releases of UNU.RAN.

   For an example see *note As short as possible: Example_0.

How To Use
..........

Create a generator object for the given distribution object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_auto_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_auto_set_logss (UNUR_PAR* PARAMETERS, int LOGSS)
     Set the order of magnitude for the size of the sample that will be
     generated by the generator, i.e., the the common logarithm of the
     sample size.

     Default is 10.

     Notice: This feature will be used in future releases of UNU.RAN
     only.


File: unuran.info,  Node: Methods_for_CONT,  Next: Methods_for_CEMP,  Prev: AUTO,  Up: Methods

5.3 Methods for continuous univariate distributions
===================================================

* Menu:

* AROU:: Automatic Ratio-Of-Uniforms method
* ARS:: Adaptive Rejection Sampling
* CEXT:: wrapper for Continuous EXTernal generators
* CSTD:: Continuous STandarD distributions
* HINV:: Hermite interpolation based INVersion of CDF
* HRB:: Hazard Rate Bounded
* HRD:: Hazard Rate Decreasing
* HRI:: Hazard Rate Increasing
* ITDR:: Inverse Transformed Density Rejection
* NINV:: Numerical INVersion
* NROU:: Naive Ratio-Of-Uniforms method
* PINV:: Polynomial interpolation based INVersion of CDF
* SROU:: Simple Ratio-Of-Uniforms method
* SSR:: Simple Setup Rejection
* TABL:: a TABLe method with piecewise constant hats
* TDR:: Transformed Density Rejection
* UTDR:: Universal Transformed Density Rejection

Overview of methods
-------------------

Methods for continuous univariate distributions
sample with `unur_sample_cont'

method   PDF   dPDF   CDF   mode   area   other
AROU     x     x            [x]           T-concave
HINV     [x]   [x]    x                   
HRB                                       bounded hazard rate
HRD                                       decreasing hazard rate
HRI                                       increasing hazard rate
ITDR     x     x            x             monotone with pole
NINV     [x]          x                   
NROU     x                  [x]           
SROU     x                  x      x      T-concave
SSR      x                  x      x      T-concave
TABL     x                  x      [~]    all local extrema
TDR      x     x                          T-concave
TDRGW    x     x                          T-concave
UTDR     x                  x      ~      T-concave
CSTD                                      build-in standard distribution
CEXT                                      wrapper for external generator

Example
-------

     /* ------------------------------------------------------------- */
     /* File: example_cont.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from a continuous univariate            */
     /* distribution.                                                 */
     /*                                                               */
     /* We build a distribution object from scratch and sample.       */

     /* ------------------------------------------------------------- */

     /* Define the PDF and dPDF of our distribution.                  */
     /*                                                               */
     /* Our distribution has the PDF                                  */
     /*                                                               */
     /*          /  1 - x*x  if |x| <= 1                              */
     /*  f(x) = <                                                     */
     /*          \  0        otherwise                                */
     /*                                                               */

     /* The PDF of our distribution:                                  */
     double mypdf( double x, const UNUR_DISTR *distr )
          /* The second argument (`distr') can be used for parameters */
          /* for the PDF. (We do not use parameters in our example.)  */
     {
       if (fabs(x) >= 1.)
         return 0.;
       else
         return (1.-x*x);
     } /* end of mypdf() */

     /* The derivative of the PDF of our distribution:                */
     double mydpdf( double x, const UNUR_DISTR *distr )
     {
       if (fabs(x) >= 1.)
         return 0.;
       else
         return (-2.*x);
     } /* end of mydpdf() */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create a new distribution object from scratch.              */

       /* Get empty distribution object for a continuous distribution */
       distr = unur_distr_cont_new();

       /* Fill the distribution object -- the provided information    */
       /* must fulfill the requirements of the method choosen below.  */
       unur_distr_cont_set_pdf(distr,  mypdf);     /* PDF             */
       unur_distr_cont_set_dpdf(distr, mydpdf);    /* its derivative  */
       unur_distr_cont_set_mode(distr, 0.);        /* mode            */
       unur_distr_cont_set_domain(distr, -1., 1.); /* domain          */

       /* Choose a method: TDR.                                       */
       par = unur_tdr_new(distr);

       /* Set some parameters of the method TDR.                      */
       unur_tdr_set_variant_gw(par);
       unur_tdr_set_max_sqhratio(par, 0.90);
       unur_tdr_set_c(par, -0.5);
       unur_tdr_set_max_intervals(par, 100);
       unur_tdr_set_cpoints(par, 10, NULL);

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* Notice that this call has also destroyed the parameter      */
       /* object `par' as a side effect.                              */

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Example (String API)
--------------------

     /* ------------------------------------------------------------- */
     /* File: example_cont_str.c                                      */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from a continuous univariate            */
     /* distribution.                                                 */

     /* We use a generic distribution object and sample.              */
     /*                                                               */
     /* The PDF of our distribution is given by                       */
     /*                                                               */
     /*          /  1 - x*x  if |x| <= 1                              */
     /*  f(x) = <                                                     */
     /*          \  0        otherwise                                */
     /*                                                               */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       /* Use a generic continuous distribution.                      */
       /* Choose a method: TDR.                                       */
       gen = unur_str2gen(
                "distr = cont; pdf=\"1-x*x\"; domain=(-1,1); mode=0. & \
                 method=tdr; variant_gw; max_sqhratio=0.90; c=-0.5; \
                 max_intervals=100; cpoints=10");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: AROU,  Next: ARS,  Up: Methods_for_CONT

5.3.1 AROU  -  Automatic Ratio-Of-Uniforms method
-------------------------------------------------

Required:
     T-concave PDF, dPDF

Optional:
     mode

Speed:
     Set-up: slow, Sampling: fast

Reinit:
     not implemented

Reference:
     [LJa00]



   AROU is a variant of the ratio-of-uniforms method that uses the fact
that the transformed region is convex for many distributions.  It works
for all T-concave distributions with T(x) = -1/sqrt(x).

   It is possible to use this method for correlation induction by
setting an auxiliary uniform random number generator via the
`unur_set_urng_aux' call. (Notice that this must be done after a
possible `unur_set_urng' call.)  When an auxiliary generator is used
then the number of used uniform random numbers that is used up for one
generated random variate is constant and equal to 1.

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not while sampling. It can be switched on
by calling `unur_arou_set_verify' and `unur_arou_chg_verify',
respectively.  Notice however that sampling is (much) slower then.

   For densities with modes not close to 0 it is suggested to set
either the mode or the center of the distribution by the
`unur_distr_cont_set_mode' or `unur_distr_cont_set_center' call.  The
latter is the approximate location of the mode or the mean of the
distribution. This location provides some information about the main
part of the PDF and is used to avoid numerical problems.

Function reference
------------------

 -- Function: UNUR_PAR* unur_arou_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_arou_set_usedars (UNUR_PAR* PARAMETERS, int
          USEDARS)
     If USEDARS is set to `TRUE', "derandomized adaptive rejection
     sampling" (DARS) is used in setup.  Segments where the area
     between hat and squeeze is too large compared to the average area
     between hat and squeeze over all intervals are split.  This
     procedure is repeated until the ratio between area below squeeze
     and area below hat exceeds the bound given by
     `unur_arou_set_max_sqhratio' call or the maximum number of
     segments is reached. Moreover, it also aborts when no more
     segments can be found for splitting.

     Segments are split such that the angle of the segments are halved
     (corresponds to arc-mean rule of method TDR (*note TDR::)).

     Default is `TRUE'.

 -- Function: int unur_arou_set_darsfactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for "derandomized adaptive rejection sampling".  This
     factor is used to determine the segments that are "too large",
     that is, all segments where the area between squeeze and hat is
     larger than FACTOR times the average area over all intervals
     between squeeze and hat.  Notice that all segments are split when
     FACTOR is set to `0.', and that there is no splitting at all when
     FACTOR is set to `UNUR_INFINITY'.

     Default is `0.99'. There is no need to change this parameter.

 -- Function: int unur_arou_set_max_sqhratio (UNUR_PAR* PARAMETERS,
          double MAX_RATIO)
     Set upper bound for the ratio (area inside squeeze) / (area inside
     envelope).  It must be a number between 0 and 1.  When the ratio
     exceeds the given number no further construction points are
     inserted via adaptive rejection sampling.  Use `0' if no
     construction points should be added after the setup.  Use `1' if
     adding new construction points should not be stopped until the
     maximum number of construction points is reached.

     Default is `0.99'.

 -- Function: double unur_arou_get_sqhratio (const UNUR_GEN* GENERATOR)
     Get the current ratio (area inside squeeze) / (area inside
     envelope) for the generator.  (In case of an error `UNUR_INFINITY'
     is returned.)

 -- Function: double unur_arou_get_hatarea (const UNUR_GEN* GENERATOR)
     Get the area below the hat for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: double unur_arou_get_squeezearea (const UNUR_GEN*
          GENERATOR)
     Get the area below the squeeze for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: int unur_arou_set_max_segments (UNUR_PAR* PARAMETERS, int
          MAX_SEGS)
     Set maximum number of segements.  No construction points are added
     _after_ the setup when the number of segments succeeds MAX_SEGS.

     Default is `100'.

 -- Function: int unur_arou_set_cpoints (UNUR_PAR* PARAMETERS, int
          N_STP, const DOUBLE* STP)
     Set construction points for enveloping polygon.  If STP is `NULL',
     then a heuristical rule of thumb is used to get N_STP construction
     points.  This is the default behavior when this routine is not
     called.  The (default) number of construction points is `30', then.

 -- Function: int unur_arou_set_usecenter (UNUR_PAR* PARAMETERS, int
          USECENTER)
     Use the center as construction point.  Default is `TRUE'.

 -- Function: int unur_arou_set_guidefactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for relative size of the guide table for indexed search
     (see also method DGT *note DGT::). It must be greater than or equal
     to `0'.  When set to `0', then sequential search is used.

     Default is `2'.

 -- Function: int unur_arou_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_arou_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_arou_set_pedantic (UNUR_PAR* PARAMETERS, int
          PEDANTIC)
     Sometimes it might happen that `unur_init' has been executed
     successfully. But when additional construction points are added by
     adaptive rejection sampling, the algorithm detects that the PDF is
     not T-concave.

     With PEDANTIC being `TRUE', the sampling routine is then exchanged
     by a routine that simply returns `UNUR_INFINITY'. Otherwise the
     new point is not added to the list of construction points. At
     least the hat function remains T-concave.

     Setting PEDANTIC to `FALSE' allows sampling from a distribution
     which is "almost" T-concave and small errors are tolerated.
     However it might happen that the hat function cannot be improved
     significantly. When the hat function that has been constructed by
     the `unur_init' call is extremely large then it might happen that
     the generation times are extremely high (even hours are possible
     in extremely rare cases).

     Default is `FALSE'.


File: unuran.info,  Node: ARS,  Next: CEXT,  Prev: AROU,  Up: Methods_for_CONT

5.3.2 ARS  -  Adaptive Rejection Sampling
-----------------------------------------

Required:
     concave logPDF, derivative of logPDF

Optional:
     mode

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [GWa92] [HLD04: Cha.4]



   ARS is an acceptance/rejection method that uses the concavity of the
log-density function to construct hat function and squeezes
automatically.  It is very similar to method TDR (*note TDR::) with
variant GW, parameter `c = 0', and DARS switched off.  Moreover, method
ARS requires the logPDF and its derivative dlogPDF to run. On the other
hand, it is designed to draw only a (very) small samples and it is much
more robust against densities with very large or small areas below the
PDF as it occurs, for example, in conditional distributions of (high
dimensional) multivariate distributions.  Additionally, it can be
re-initialized when the underlying distribution has been modified.
Thus it is well suited for Gibbs sampling.

   Notice, that method ARS is a restricted version of TDR. If the full
functionally of Transformed Density Rejection is needed use method
*note TDR::.

How To Use
..........

Method ARS is designed for distributions with log-concave densities. To
use this method you need a distribution object with the logarithm of
the PDF and its derivative given.

   The number of construction points as well as a set of such points
can be provided using `unur_ars_set_cpoints'.  Notice that addition
construction points are added by means of adaptive rejection sampling
until the maximal number of intervals given by
`unur_ars_set_max_intervals' is reached.

   A generated distribution object can be reinitialized using the
`unur_reinit' call. When `unur_reinit' is called construction points
for the new generator are necessary. There are two options: Either the
same construction points as for the initial generator (given by a
`unur_ars_set_cpoints' call) are used (this is the default), or
percentiles of the old hat function can be used.  This can be set or
changed using `unur_ars_set_reinit_percentiles' and
`unur_ars_chg_reinit_percentiles'.  This feature is usefull when the
underlying distribution object is only moderately changed. (An example
is Gibbs sampling with small correlations.)

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not. It can be switched on by calling
`unur_ars_set_verify' and `unur_ars_chg_verify', respectively.  Notice
however that sampling is (much) slower then.

   Method ARS aborts after a given number of iterations and return
UNUR_INFINITY to prevent (almost) infinite loops. This might happen
when the starting hat is much too large and it is not possible to
insert new construction points due to severe numerical errors or (more
likely) the given PDF is not log-concave. This maximum number of
iterations can be set by means of a `unur_ars_set_max_iter' call.

Function reference
------------------

 -- Function: UNUR_PAR* unur_ars_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_ars_set_max_intervals (UNUR_PAR* PARAMETERS, int
          MAX_IVS)
     Set maximum number of intervals.  No construction points are added
     after the setup when the number of intervals suceeds MAX_IVS.  It
     is increased automatically to twice the number of construction
     points if this is larger.

     Default is `200'.

 -- Function: int unur_ars_set_cpoints (UNUR_PAR* PARAMETERS, int
          N_CPOINTS, const DOUBLE* CPOINTS)
     Set construction points for the hat function. If CPOINTS is `NULL'
     then a heuristic rule of thumb is used to get N_CPOINTS
     construction points. This is the default behavior.  N_CPOINTS
     should be at least `2', otherwise defaults are used.

     The default number of construction points is 2.

 -- Function: int unur_ars_set_reinit_percentiles (UNUR_PAR*
          PARAMETERS, int N_PERCENTILES, const DOUBLE* PERCENTILES)
 -- Function: int unur_ars_chg_reinit_percentiles (UNUR_GEN* GENERATOR,
          int N_PERCENTILES, const DOUBLE* PERCENTILES)
     By default, when the GENERATOR object is reinitialized, it used
     the same construction points as for the initialization procedure.
     Often the underlying distribution object has been changed only
     moderately. For example, the full conditional distribution of a
     multivariate distribution.  In this case it might be more
     appropriate to use percentilesm of the hat function for the last
     (unchanged) distribution. PERCENTILES must then be a pointer to an
     ordered array of numbers between `0.01' and `0.99'.  If
     PERCENTILES is `NULL', then a heuristic rule of thumb is used to
     get N_PERCENTILES values for these percentiles.  Notice that
     N_PERCENTILES must be at least `2', otherwise defaults are used.
     (Then the first and third quartiles are used by default.)

 -- Function: int unur_ars_set_reinit_ncpoints (UNUR_PAR* PARAMETERS,
          int NCPOINTS)
 -- Function: int unur_ars_chg_reinit_ncpoints (UNUR_GEN* GENERATOR,
          int NCPOINTS)
     When reinit fails with the given construction points or the
     percentiles of the old hat function, another trial is undertaken
     with NCPOINTS construction points. NCPOINTS must be at least `10'.

     Default: `30'

 -- Function: int unur_ars_set_max_iter (UNUR_PAR* PARAMETERS, int
          MAX_ITER)
     The rejection loop stops after MAX_ITER iterations and return
     UNUR_INFINITY.

     Default: `10000'

 -- Function: int unur_ars_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_ars_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_ars_set_pedantic (UNUR_PAR* PARAMETERS, int
          PEDANTIC)
     Sometimes it might happen that `unur_init' has been executed
     successfully. But when additional construction points are added by
     adaptive rejection sampling, the algorithm detects that the PDF is
     not log-concave.

     With PEDANTIC being `TRUE', the sampling routine is exchanged by a
     routine that simply returns `UNUR_INFINITY'. Otherwise the new
     point is not added to the list of construction points. At least
     the hat function remains log-concave.

     Setting PEDANTIC to `FALSE' allows sampling from a distribution
     which is "almost" log-concave and small errors are tolerated.
     However it might happen that the hat function cannot be improved
     significantly. When the hat functions that has been constructed by
     the `unur_init' call is extremely large then it might happen that
     the generation times are extremely high (even hours are possible
     in extremely rare cases).

     Default is `FALSE'.

 -- Function: double unur_ars_get_loghatarea (const UNUR_GEN* GENERATOR)
     Get the logarithm of area below the hat for the generator.  (In
     case of an error `UNUR_INFINITY' is returned.)

 -- Function: double unur_ars_eval_invcdfhat (const UNUR_GEN*
          GENERATOR, double U)
     Evaluate the inverse of the CDF of the hat distribution at U.

     If U is out of the domain [0,1] then `unur_errno' is set to
     `UNUR_ERR_DOMAIN' and the respective bound of the domain of the
     distribution are returned (which is `-UNUR_INFINITY' or
     `UNUR_INFINITY' in the case of unbounded domains).


File: unuran.info,  Node: CEXT,  Next: CSTD,  Prev: ARS,  Up: Methods_for_CONT

5.3.3 CEXT  -  wrapper for Continuous EXTernal generators
---------------------------------------------------------

Required:
     routine for sampling continuous random variates

Speed:
     depends on external generator

Reinit:
     supported


   Method CEXT is a wrapper for external generators for continuous
univariate distributions. It allows the usage of external random
variate generators within the UNU.RAN framework.

How To Use
..........

The following steps are required to use some external generator within
the UNU.RAN framework (some of these are optional):

  1. Make an empty generator object using a `unur_cext_new' call.  The
     argument DISTRIBUTION is optional and can be replaced by `NULL'.
     However, it is required if you want to pass parameters of the
     generated distribution to the external generator or for running
     some validation tests provided by UNU.RAN.

  2. Create an initialization routine of type `int (*init)(UNUR_GEN
     *gen)' and plug it into the generator object using the
     `unur_cext_set_init' call. Notice that the INIT routine must
     return `UNUR_SUCCESS' when it has been executed successfully and
     `UNUR_FAILURE' otherwise.  It is possible to get the size of and
     the pointer to the array of parameters of the underlying
     distribution object by the respective calls
     `unur_cext_get_ndistrparams' and `unur_cext_get_distrparams'.
     Parameters for the external generator that are computed in the
     INIT routine can be stored in a single array or structure which is
     available by the `unur_cext_get_params' call.

     Using an INIT routine is optional and can be omitted.

  3. Create a sampling routine of type `double (*sample)(UNUR_GEN
     *gen)' and plug it into the generator object using the
     `unur_cext_set_sample' call.

     Uniform random numbers are provided by the `unur_sample_urng'
     call. Do not use your own implementation of a uniform random
     number generator directly. If you want to use your own random
     number generator we recommend to use the UNU.RAN interface (see
     *note Using uniform random number generators: URNG.).

     The array or structure that contains parameters for the external
     generator that are computed in the INIT routine are available
     using the `unur_cext_get_params' call.

     Using a SAMPLE routine is of course obligatory.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator
object. The INIT routine is then called again.

   Here is a short example that demonstrates the application of this
method by means of the exponential distribution:

     /* ------------------------------------------------------------- */
     /* File: example_cext.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* This example shows how an external generator for the          */
     /* exponential distribution with one scale parameter can be      */
     /* used within the UNURAN framework.                             */
     /*                                                               */
     /* Notice, that this example does not provide the simplest       */
     /* solution.                                                     */

     /* ------------------------------------------------------------- */
     /* Initialization routine.                                       */
     /*                                                               */
     /*   Here we simply read the scale parameter of the exponential  */
     /*   distribution and store it in an array for parameters of     */
     /*   the external generator.                                     */
     /*   [ Of course we could do this in the sampling routine as     */
     /*   and avoid the necessity of this initialization routine. ]   */

     int exponential_init (UNUR_GEN *gen)
     {
       /* Get pointer to parameters of exponential distribution       */
       double *params = unur_cext_get_distrparams(gen);

       /* The scale parameter is the first entry (see manual)         */
       double lambda = (params) ? params[0] : 1.;

       /* Get array to store this parameter for external generator    */
       double *genpar = unur_cext_get_params(gen, sizeof(double));
       genpar[0] = lambda;

       /* Executed successfully                                       */
       return UNUR_SUCCESS;
     }

     /* ------------------------------------------------------------- */
     /* Sampling routine.                                             */
     /*                                                               */
     /*   Contains the code for the external generator.               */

     double exponential_sample (UNUR_GEN *gen)
     {
       /* Get scale parameter                                         */
       double *genpar = unur_cext_get_params(gen,0);
       double lambda = genpar[0];

       /* Sample a uniformly distributed random number                */
       double U = unur_sample_urng(gen);

       /* Transform into exponentially distributed random variate     */
       return ( -log(1. - U) * lambda );
     }

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */
       double x;     /* will hold the random number                   */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Use predefined exponential distribution with scale param. 2 */
       double fpar[1] = { 2. };
       distr = unur_distr_exponential(fpar, 1);

       /* Use method CEXT                                             */
       par = unur_cext_new(distr);

       /* Set initialization and sampling routines.                   */
       unur_cext_set_init(par, exponential_init);
       unur_cext_set_sample(par, exponential_sample);

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Function reference
------------------

 -- Function: UNUR_PAR* unur_cext_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for new generator.

 -- Function: int unur_cext_set_init (UNUR_PAR* PARAMETERS, int (*
          INIT)(UNUR_GEN* gen ))
     Set initialization routine for external generator. Inside the

     _Important:_ The routine INIT must return `UNUR_SUCCESS' when the
     generator was initialized successfully and `UNUR_FAILURE'
     otherwise.

     Parameters that are computed in the INIT routine can be stored in
     an array or structure that is avaiable by means of the
     `unur_cext_get_params' call. Parameters of the underlying
     distribution object can be obtained by the
     `unur_cext_get_distrparams' call.

 -- Function: int unur_cext_set_sample (UNUR_PAR* PARAMETERS, double (*
          SAMPLE)(UNUR_GEN* gen ))
     Set sampling routine for external generator.

     _Important:_ Use `unur_sample_urng(gen)' to get a uniform random
     number.  The pointer to the array or structure that contains the
     parameters that are precomputed in the INIT routine are available
     by `unur_cext_get_params(gen,0)'.  Additionally one can use the
     `unur_cext_get_distrparams' call.

 -- Function: void* unur_cext_get_params (UNUR_GEN* GENERATOR, size_t
          SIZE)
     Get pointer to memory block for storing parameters of external
     generator. A memory block of size SIZE is automatically (re-)
     allocated if necessary and the pointer to this block is stored in
     the GENERATOR object. If one only needs the pointer to this memory
     block set SIZE to `0'.

     Notice, that SIZE is the size of the memory block and not the
     length of an array.

     _Important:_ This rountine should only be used in the
     initialization and sampling routine of the external generator.

 -- Function: double* unur_cext_get_distrparams (UNUR_GEN* GENERATOR)
 -- Function: int unur_cext_get_ndistrparams (UNUR_GEN* GENERATOR)
     Get size of and pointer to array of parameters of underlying
     distribution in GENERATOR object.

     _Important:_ These rountines should only be used in the
     initialization and sampling routine of the external generator.


File: unuran.info,  Node: CSTD,  Next: HINV,  Prev: CEXT,  Up: Methods_for_CONT

5.3.4 CSTD  -  Continuous STandarD distributions
------------------------------------------------

Required:
     standard distribution from UNU.RAN library (*note Standard
     distributions: Stddist.) or continuous distribution with inverse
     CDF.

Speed:
     Set-up: fast, Sampling: depends on distribution and generator

Reinit:
     supported


   CSTD is a wrapper for special generators for continuous univariate
standard distributions. It only works for distributions in the UNU.RAN
library of standard distributions (*note Standard distributions:
Stddist.)  or for continuous distributions where the inverse CDF is
given.  If a distribution object is provided that is build from scratch,
it must provide the inverse CDF. Then CSTD implements the inversion
method. Otherwise, the `NULL' pointer is returned.

   For some distributions more than one special generator is possible.

How To Use
..........

Create a distribution object for a standard distribution from the
UNU.RAN library (*note Standard distributions: Stddist.), or create a
continuous distribution object and set the function for the inverse CDF
using `unur_distr_cont_set_invcdf'.  For some distributions more than
one special generator (_variants_) is possible. These can be choosen by
a `unur_cstd_set_variant' call. For possible variants *note Standard
distributions: Stddist.  However the following are common to all
distributions:

`UNUR_STDGEN_DEFAULT'
     the default generator.

`UNUR_STDGEN_FAST'
     the fastest available special generator.

`UNUR_STDGEN_INVERSION'
     the inversion method (if available).

   Notice that the variant `UNUR_STDGEN_FAST' for a special generator
may be slower than one of the universal algorithms!  Additional
variants may exist for particular distributions.

   Sampling from truncated distributions (which can be constructed by
changing the default domain of a distribution by means of
`unur_distr_cont_set_domain' or `unur_cstd_chg_truncated' calls) is
possible but requires the inversion method. Moreover the CDF of the
distribution must be implemented.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_cstd_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for new generator. It requires a
     distribution object for a continuous univariant distribution from
     the UNU.RAN library of standard distributions (*note Standard
     distributions: Stddist.).

     Using a truncated distribution is allowed only if the inversion
     method is available and selected by the `unur_cstd_set_variant'
     call immediately after creating the parameter object.  Use a
     `unur_distr_cont_set_domain' call to get a truncated distribution.
     To change the domain of a (truncated) distribution of a generator
     use the `unur_cstd_chg_truncated' call.

 -- Function: int unur_cstd_set_variant (UNUR_PAR* PARAMETERS, unsigned
          VARIANT)
     Set variant (special generator) for sampling from a given
     distribution.  For possible variants *note Standard distributions:
     Stddist.

     Common variants are `UNUR_STDGEN_DEFAULT' for the default
     generator, `UNUR_STDGEN_FAST' for (one of the) fastest implemented
     special generators, and `UNUR_STDGEN_INVERSION' for the inversion
     method (if available).  If the selected variant number is not
     implemented, then an error code is returned and the variant is not
     changed.

 -- Function: int unur_cstd_chg_truncated (UNUR_GEN* GENERATOR, double
          LEFT, double RIGHT)
     Change left and right border of the domain of the (truncated)
     distribution.  This is only possible if the inversion method is
     used.  Otherwise this call has no effect and an error code is
     returned.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call.

     It is not required to run `unur_reinit' after this call has been
     used.

     _Important:_ If the CDF is (almost) the same for LEFT and RIGHT
     and (almost) equal to `0' or `1', then the truncated domain is not
     chanced and the call returns an error code.

     _Notice:_ If the parameters of the distribution has been changed
     it is recommended to set the truncated domain again, since the
     former call might change the domain of the distribution but not
     update the values for the boundaries of the truncated distribution.


File: unuran.info,  Node: HINV,  Next: HRB,  Prev: CSTD,  Up: Methods_for_CONT

5.3.5 HINV  -  Hermite interpolation based INVersion of CDF
-----------------------------------------------------------

Required:
     CDF

Optional:
     PDF, dPDF

Speed:
     Set-up: (very) slow, Sampling: (very) fast

Reinit:
     supported

Reference:
     [HLa03] [HLD04: Sect.7.2; Alg.7.1]



   HINV is a variant of numerical inversion, where the inverse CDF is
approximated using Hermite interpolation, i.e., the interval [0,1] is
split into several intervals and in each interval the inverse CDF is
approximated by polynomials constructed by means of values of the CDF
and PDF at interval boundaries. This makes it possible to improve the
accuracy by splitting a particular interval without recomputations in
unaffected intervals. Three types of splines are implemented: linear,
cubic, and quintic interpolation. For linear interpolation only the CDF
is required. Cubic interpolation also requires PDF and quintic
interpolation PDF and its derivative.

   These splines have to be computed in a setup step. However, it only
works for distributions with bounded domain; for distributions with
unbounded domain the tails are chopped off such that the probability
for the tail regions is small compared to the given u-resolution.

   The method is not exact, as it only produces random variates of the
approximated distribution. Nevertheless, the maximal numerical error in
"u-direction" (i.e. |U-CDF(X)|, for X = "approximate inverse CDF"(U)
|U-CDF(X)|) can be set to the required resolution (within machine
precision).  Notice that very small values of the u-resolution are
possible but may increase the cost for the setup step.

   As the possible maximal error is only estimated in the setup it may
be necessary to set some special design points for computing the
Hermite interpolation to guarantee that the maximal u-error can not be
bigger than desired. Such points are points where the density is not
differentiable or has a local extremum. Notice that there is no
necessity to do so. However, if you do not provide these points to the
algorithm there might be a small chance that the approximation error is
larger than the given u-resolution, or that the required number of
intervals is larger than necessary.

How To Use
..........

HINV works for continuous univariate distribution objects with given
CDF and (optional) PDF. It uses Hermite interpolation of order 1, 3
[default] or 5. The order can be set by means of `unur_hinv_set_order'.
For distributions with unbounded domains the tails are chopped off such
that the probability for the tail regions is small compared to the
given u-resulution. For finding these cut points the algorithm starts
with the region `[-1.e20,1.e20]'. For the exceptional case where this
might be too small (or one knows this region and wants to avoid this
search heuristics) it can be directly set via a `unur_hinv_set_boundary'
call.

   It is possible to use this method for generating from truncated
distributions. It even can be changed for an existing generator object
by an `unur_hinv_chg_truncated' call.

   This method is not exact, as it only produces random variates of the
approximated distribution. Nevertheless, the numerical error in
"u-direction" (i.e. |U-CDF(X)|, for X = "approximate inverse CDF"(U)
|U-CDF(X)|) can be controlled by means of `unur_hinv_set_u_resolution'.
The possible maximal error is only estimated in the setup. Thus it
might be necessary to set some special design points for computing the
Hermite interpolation to guarantee that the maximal u-error can not be
bigger than desired. Such points (e.g. extremal points of the PDF,
points with infinite derivative) can be set using using the
`unur_hinv_set_cpoints' call.  If the mode for a unimodal distribution
is set in the distribution object this mode is automatically used as
design-point if the `unur_hinv_set_cpoints' call is not used.

   As already mentioned the maximal error of this approximation is only
estimated. If this error is crucial for an application we recommend to
compute this error using `unur_hinv_estimate_error' which runs a small
Monte Carlo simulation.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
The values given by the last `unur_hinv_chg_truncated' call will be
then changed to the values of the domain of the underlying distribution
object. Moreover, starting construction points (nodes) that are given by
a `unur_hinv_set_cpoints' call are ignored when `unur_reinit' is called.
It is important to note that for a distribution from the UNU.RAN
library of standard distributions (*note Standard distributions:
Stddist.)  the normalization constant has to be updated using the
`unur_distr_cont_upd_pdfarea' call whenever its parameters have been
changed by means of a `unur_distr_cont_set_pdfparams' call.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hinv_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_hinv_set_order (UNUR_PAR* PARAMETERS, int ORDER)
     Set order of Hermite interpolation. Valid orders are `1', `3', and
     `5'.  Notice that ORDER greater than `1' requires the density of
     the distribution, and ORDER greater than `3' even requires the
     derivative of the density. Using ORDER `1' results for most
     distributions in a huge number of intervals and is therefore not
     recommended. If the maximal error in u-direction is very small
     (say smaller than `1.e-10'), ORDER `5' is recommended as it leads
     to considerably fewer design points, as long there are no poles or
     heavy tails.

     _Remark:_ When the target distribution has poles or (very) heavy
     tails ORDER `5' (i.e., quintic interpolation) is numerically less
     stable and more sensitive to round-off errors than ORDER `3'
     (i.e., cubic interpolation).

     Default is `3' if the density is given and `1' otherwise.

 -- Function: int unur_hinv_set_u_resolution (UNUR_PAR* PARAMETERS,
          double U_RESOLUTION)
     Set maximal error in u-direction. However, the given u-error must
     not be smaller than machine epsilon (`DBL_EPSILON') and should not
     be too close to this value. As the resolution of most uniform
     random number sources is 2^(-32) = `2.3e-10', a value of `1.e-10'
     leads to an inversion algorithm that could be called exact. For
     most simulations slightly bigger values for the maximal error are
     enough as well.

     Remark: The u-error might become larger than U_RESOLUTION due to
     rescaling of floating point numbers when the domain of the
     distribution is truncated by a `unur_hinv_chg_truncated' call.

     Default is `1.e-10'.

 -- Function: int unur_hinv_set_cpoints (UNUR_PAR* PARAMETERS, const
          DOUBLE* STP, int N_STP)
     Set starting construction points (nodes) for Hermite interpolation.

     As the possible maximal error is only estimated in the setup it
     may be necessary to set some special design points for computing
     the Hermite interpolation to guarantee that the maximal u-error
     can not be bigger than desired. We suggest to include as special
     design points all local extrema of the density, all points where
     the density is not differentiable, and isolated points inside of
     the domain with density 0.  If there is an interval with density
     constant equal to 0 inside of the given domain of the density,
     both endpoints of this interval should be included as special
     design points. Notice that there is no necessity to do so.
     However, if these points are not provided to the algorithm the
     approximation error might be larger than the given u-resolution,
     or the required number of intervals could be larger than necessary.

     _Important_: Notice that the given points must be in increasing
     order and they must be disjoint.

     _Important_: The boundary point of the computational region must
     not be given in this list!  Points outside the boundary of the
     computational region are ignored.

     Default is for unimodal densities - if known - the mode of the
     density, if it is not equal to the border of the domain.

 -- Function: int unur_hinv_set_boundary (UNUR_PAR* PARAMETERS, double
          LEFT, double RIGHT)
     Set the left and right boundary of the computational interval.  Of
     course `+/- UNUR_INFINITY' is not allowed.  If the CDF at LEFT and
     RIGHT is not close to the respective values `0.' and `1.' then
     this interval is increased by a (rather slow) search algorithm.

     _Important_: This call does not change the domain of the given
     distribution itself. But it restricts the domain for the resulting
     random variates.

     Default is `1.e20'.

 -- Function: int unur_hinv_set_guidefactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for relative size of the guide table for indexed search
     (see also method DGT *note DGT::). It must be greater than or equal
     to `0'.  When set to `0', then sequential search is used.

     Default is `1'.

 -- Function: int unur_hinv_set_max_intervals (UNUR_PAR* PARAMETERS,
          int MAX_IVS)
     Set maximum number of intervals. No generator object is created if
     the necessary number of intervals for the Hermite interpolation
     exceeds MAX_IVS. It is used to prevent the algorithm to eat up all
     memory for very badly shaped CDFs.

     Default is `1000000' (1.e6).

 -- Function: int unur_hinv_get_n_intervals (const UNUR_GEN* GENERATOR)
     Get number of nodes (design points) used for Hermite interpolation
     in the generator object. The number of intervals is the number of
     nodes minus 1.  It returns an error code in case of an error.

 -- Function: double unur_hinv_eval_approxinvcdf (const UNUR_GEN*
          GENERATOR, double U)
     Evaluate Hermite interpolation of inverse CDF at U.  If U is out
     of the domain [0,1] then `unur_errno' is set to `UNUR_ERR_DOMAIN'
     and the respective bound of the domain of the distribution are
     returned (which is `-UNUR_INFINITY' or `UNUR_INFINITY' in the case
     of unbounded domains).

     _Notice_: When the domain has been truncated by a
     `unur_hinv_chg_truncated' call then the inverse CDF of the
     truncated distribution is returned.

 -- Function: int unur_hinv_chg_truncated (UNUR_GEN* GENERATOR, double
          LEFT, double RIGHT)
     Changes the borders of the domain of the (truncated) distribution.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call. The tables of splines are not
     recomputed.  Thus it might happen that the relative error for the
     generated variates from the truncated distribution is greater than
     the bound for the non-truncated distribution. This call also fails
     when the CDF values of the boundary points are too close, i.e.
     when only a few different floating point numbers would be computed
     due to round-off errors with floating point arithmetic.

     Remark: The u-error might become larger than the U_RESOLUTION
     given by a `unur_hinv_set_u_resolution' call due to rescaling of
     floating point numbers when the domain of the distribution is
     truncated.

     When failed an error code is returned.

     _Important_: Always check the return code since the domain is not
     changed in case of an error.

 -- Function: int unur_hinv_estimate_error (const UNUR_GEN* GENERATOR,
          int SAMPLESIZE, double* MAX_ERROR, double* MAE)
     Estimate maximal u-error and mean absolute error (MAE) for
     GENERATOR by means of a (quasi-) Monte-Carlo simulation with
     sample size SAMPLESIZE.  The results are stored in MAX_ERROR and
     MAE, respectively.

     It returns `UNUR_SUCCESS' if successful.


File: unuran.info,  Node: HRB,  Next: HRD,  Prev: HINV,  Up: Methods_for_CONT

5.3.6 HRB  -  Hazard Rate Bounded
---------------------------------

Required:
     bounded hazard rate

Optional:
     upper bound for hazard rate

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [HLD04: Sect.9.1.4; Alg.9.4]



   Generates random variate with given hazard rate which must be
bounded from above. It uses the thinning method with a constant
dominating hazard function.

How To Use
..........

HRB requires a hazard function for a continuous distribution together
with an upper bound. The latter has to be set using the
`unur_hrb_set_upperbound' call. If no such upper bound is given it is
assumed that the upper bound can be achieved by evaluating the hazard
rate at the left hand boundary of the domain of the distribution.
Notice, however, that for decreasing hazard rate the method HRD (*note
Hazard Rate Decreasing: HRD.) is much faster and thus the prefered
method.

   It is important to note that the domain of the distribution can be
set via a `unur_distr_cont_set_domain' call.  However, the left border
must not be negative. Otherwise it is set to `0'. This is also the
default if no domain is given at all. For computational reasons the
right border is always set to `UNUR_INFINITY' independently of the given
domain. Thus for domains bounded from right the function for computing
the hazard rate should return `UNUR_INFINITY' right of this domain.

   For distributions with increasing hazard rate method HRI (*note
Hazard Rate Increasing: HRI.) is required.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that the upper bound given by the `unur_hrb_set_upperbound' call
cannot be changed and must be valid for the changed distribution.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hrb_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_hrb_set_upperbound (UNUR_PAR* PARAMETERS, double
          UPPERBOUND)
     Set upper bound for hazard rate. If this call is not used it is
     assumed that the the maximum of the hazard rate is achieved at the
     left hand boundary of the domain of the distribution.

 -- Function: int unur_hrb_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_hrb_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the hazard
     rate is not bounded by the given bound, then `unur_errno' is set
     to `UNUR_ERR_GEN_CONDITION'.

     Default is `FALSE'.


File: unuran.info,  Node: HRD,  Next: HRI,  Prev: HRB,  Up: Methods_for_CONT

5.3.7 HRD  -  Hazard Rate Decreasing
------------------------------------

Required:
     decreasing (non-increasing) hazard rate

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [HLD04: Sect.9.1.5; Alg.9.5]



   Generates random variate with given non-increasing hazard rate.  It
is necessary that the distribution object contains this hazard rate.
Decreasing hazard rate implies that the corresponding PDF of the
distribution has heavier tails than the exponential distribution (which
has constant hazard rate).

How To Use
..........

HRD requires a hazard function for a continuous distribution with
non-increasing hazard rate. There are no parameters for this method.

   It is important to note that the domain of the distribution can be
set via a `unur_distr_cont_set_domain' call. However, only the left
hand boundary is used. For computational reasons the right hand
boundary is always reset to `UNUR_INFINITY'.  If no domain is given by
the user then the left hand boundary is set to `0'.

   For distributions which do not have decreasing hazard rates but are
bounded from above use method HRB (*note Hazard Rate Bounded: HRB.).
For distributions with increasing hazard rate method HRI (*note Hazard
Rate Increasing: HRI.) is required.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hrd_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_hrd_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_hrd_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the hazard
     rate is not bounded by the given bound, then `unur_errno' is set
     to `UNUR_ERR_GEN_CONDITION'.

     Default is `FALSE'.


File: unuran.info,  Node: HRI,  Next: ITDR,  Prev: HRD,  Up: Methods_for_CONT

5.3.8 HRI  -  Hazard Rate Increasing
------------------------------------

Required:
     increasing (non-decreasing) hazard rate

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [HLD04: Sect.9.1.6; Alg.9.6]



   Generates random variate with given non-increasing hazard rate.  It
is necessary that the distribution object contains this hazard rate.
Increasing hazard rate implies that the corresponding PDF of the
distribution has heavier tails than the exponential distribution (which
has constant hazard rate).

   The method uses a decomposition of the hazard rate into a main part
which is constant for all x beyond some point p0 and a remaining part.
From both of these parts points are sampled using the thinning method
and the minimum of both is returned. Sampling from the first part is
easier as we have a constant dominating hazard rate. Thus p0 should be
large. On the other hand, if p0 is large than the thinning algorithm
needs many iteration. Thus the performance of the the algorithm deponds
on the choice of p0. We found that values close to the expectation of
the generated distribution result in good performance.

How To Use
..........

HRI requires a hazard function for a continuous distribution with
non-decreasing hazard rate.  The parameter p0 should be set to a value
close to the expectation of the required distribution using
`unur_hri_set_p0'.  If performance is crucial one may try other values
as well.

   It is important to note that the domain of the distribution can be
set via a `unur_distr_cont_set_domain' call. However, only the left
hand boundary is used. For computational reasons the right hand
boundary is always reset to `UNUR_INFINITY'.  If no domain is given by
the user then the left hand boundary is set to `0'.

   For distributions with decreasing hazard rate method HRD (*note
Hazard Rate Decreasing: HRI.) is required.  For distributions which do
not have increasing or decreasing hazard rates but are bounded from
above use method HRB (*note Hazard Rate Bounded: HRB.).

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

   Notice, that the upper bound given by the `unur_hrb_set_upperbound'
call cannot be changed and must be valid for the changed distribution.
Notice that the parameter p0 which has been set by a `unur_hri_set_p0'
call cannot be changed and must be valid for the changed distribution.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hri_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_hri_set_p0 (UNUR_PAR* PARAMETERS, double P0)
     Set design point for algorithm. It is used to split the domain of
     the distribution. Values for P0 close to the expectation of the
     distribution results in a relatively good performance of the
     algorithm.  It is important that the hazard rate at this point
     must be greater than `0' and less than `UNUR_INFINITY'.

     Default: left boundary of domain + `1.'

 -- Function: int unur_hri_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_hri_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the hazard
     rate is not bounded by the given bound, then `unur_errno' is set
     to `UNUR_ERR_GEN_CONDITION'.

     Default is `FALSE'.


File: unuran.info,  Node: ITDR,  Next: NINV,  Prev: HRI,  Up: Methods_for_CONT

5.3.9 ITDR  -  Inverse Transformed Density Rejection
----------------------------------------------------

Required:
     monotone PDF, dPDF, pole

Optional:
     splitting point between pole and tail region, c-values

Speed:
     Set-up: moderate, Sampling: moderate

Reinit:
     supported

Reference:
     [HLDa07]



   ITDR is an acceptance/rejection method that works for monotone
densities. It is especially designed for PDFs with a single pole. It
uses different hat functions for the pole region and for the tail
region. For the tail region _Transformed Density Rejection_ with a
single construction point is used.  For the pole region a variant
called _Inverse Transformed Density Rejection_ is used. The optimal
splitting point between the two regions and the respective maximum
local concavity and inverse local concavity (*note Glossary::) that
guarantee valid hat functions for each regions are estimated.  This
splitting point is set to the intersection point of local concavity and
inverse local concavity.  However, it is assumed that both, the local
concavity and the inverse local concavity do not have a local minimum
in the interior of the domain (which is the case for all standard
distributions with a single pole).  In other cases (or when the
built-in search routines do not compute non-optimal values) one can
provide the splitting point, and the c-values.

How To Use
..........

Method ITDR requires a distribution object with given PDF and its
derivative and the location of the pole (or mode).  The PDF must be
monotone and may contain a pole.  It must be set via the
`unur_distr_cont_set_pdf' and `unur_distr_cont_set_dpdf' calls. The PDF
should return UNUR_INFINITY for the pole. Alternatively, one can also
set the logarithm of the PDF and its derivative via the
`unur_distr_cont_set_logpdf' and `unur_distr_cont_set_dlogpdf' calls.
This is in especially useful since then the setup and search routines
are numerically more stable. Moreover, for many distributions computing
the logarithm of the PDF is less expensive then computing the PDF
directly.

   The pole of the distribution is given by a `unur_distr_cont_set_mode'
call. Notice that distributions with "heavy" poles may have numerical
problems caused by the resultion of the floating point numbers used by
computers.  While the minimal distance between two different floating
point numbers is about `1.e-320' near `0.' it increases to `1.e-16'
near `1.' Thus any random variate generator implemented on a digital
computer in fact draws samples from a discrete distribution that
approximates the desired continuous distribution. For distributions
with "heavy" poles not at 0 this approximation may be too crude and
thus every goodness-of-fit test will fail.  Besides this theoretic
problem that cannot be resolved we have to take into consideration that
round-off errors occur more frequently when we have PDFs with poles far
away from `0.' Method ITDR tries to handles this situation as good as
possible by moving the pole into `0.' Thus do not use a wrapper for
your PDF that hides this shift since the information about the
resolution of the floating point numbers near the pole gets lost.

   Method ITDR uses different hats for the pole region and for the tail
region. The splitting point between these two regions, the optimal
c-value and design points for constructing the hats using Transformed
Density Rejection are computed automatically.  (The results of these
computations can be read using the respective calls `unur_itdr_get_xi',
`unur_itdr_get_cp' , and `unur_itdr_get_ct' for the intersection point
between local concavity and inverse local concavity, the c-value for the
pole and the tail region.)  However, one can also analyze the local
concavity and inverse local concavity set the corresponding values using
`unur_itdr_set_xi', `unur_itdr_set_cp' , and `unur_itdr_set_ct' calls.
Notice, that c-values greater than -1/2 can be set to `-0.5'. Although
this results in smaller acceptance probabities sampling from the hat
distribution is much faster than for other values of c. Depending on
the expenses of evaluating the PDF the resulting algorithm is usually
faster.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
However, the values given by `unur_itdr_set_xi', `unur_itdr_set_cp' , or
`unur_itdr_set_ct' calls are then ignored when `unur_reinit' is called.

Function reference
------------------

 -- Function: UNUR_PAR* unur_itdr_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_itdr_set_xi (UNUR_PAR* PARAMETERS, double XI)
     Sets points where local concavity and inverse local concavity are
     (almost) equal. It is used to estimate the respective c-values for
     pole region and hat regions and to determine the splitting point bx
     between pole and tail region.  If no such point is provided it
     will be computed automatically.

     Default: not set.

 -- Function: int unur_itdr_set_cp (UNUR_PAR* PARAMETERS, double CP)
     Sets parameter CP for transformation T for inverse density in pole
     region.  It must be at most 0 and greater than -1.  A value of
     `-0.5' is treated separately and usually results in faster
     marginal generation time (at the expense of smaller acceptance
     probabilities.  If no CP-value is given it is estimated
     automatically.

     Default: not set.

 -- Function: int unur_itdr_set_ct (UNUR_PAR* PARAMETERS, double CT)
     Sets parameter CT for transformation T for density in tail region.
     It must be at most 0. For densities with unbounded domain it must
     be greater than -1.  A value of `-0.5' is treated separately and
     usually results in faster marginal generation time (at the expense
     of smaller acceptance probabilities.  If no CT-value is given it
     is estimated automatically.

     Default: not set.

 -- Function: double unur_itdr_get_xi (UNUR_GEN* GENERATOR)
 -- Function: double unur_itdr_get_cp (UNUR_GEN* GENERATOR)
 -- Function: double unur_itdr_get_ct (UNUR_GEN* GENERATOR)
     Get intersection point XI, and c-values CP and CT, respectively.
     (In case of an error `UNUR_INFINITY' is returned.)

 -- Function: double unur_itdr_get_area (UNUR_GEN* GENERATOR)
     Get area below hat.  (In case of an error `UNUR_INFINITY' is
     returned.)

 -- Function: int unur_itdr_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
     Turn verifying of algorithm while sampling on/off.

     If the condition PDF(x) <= hat(x) is violated for some x then
     `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However, notice
     that this might happen due to round-off errors for a few values of
     x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_itdr_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Change the verifying of algorithm while sampling on/off.


File: unuran.info,  Node: NINV,  Next: NROU,  Prev: ITDR,  Up: Methods_for_CONT

5.3.10 NINV  -  Numerical INVersion
-----------------------------------

Required:
     CDF

Optional:
     PDF

Speed:
     Set-up: optional, Sampling: (very) slow

Reinit:
     supported


   NINV implementations of some methods for numerical inversion:
Newton's method, regula falsi (combined with interval bisectioning),
and bisection method.  Regula falsi and bisection method require only
the CDF while Newton's method also requires the PDF.  To speed up
marginal generation times a table with suitable starting points can be
created during the setup.  The performance of the algorithm can
adjusted by the desired accuracy of the method.  It is possible to use
this method for generating from truncated distributions. The truncated
domain can be changed for an existing generator object.

How To Use
..........

Method NINV generates random variates by numerical inversion and
requires a continuous univariate distribution objects with given CDF.
Three variants are available:

   - Regula falsi  [default]

   - Newton's method

   - Interval bisectioning

   Newton's method additionally requires the PDF of the distribution
and cannot be used otherwise (NINV automatically switches to regula
falsi then).  Default algorithm is regula falsi. It is slightly slower
but numerically much more stable than Newton's algorithm.  Interval
bisectioning is the slowest method and should only be considered as a
last resort when the other methods fails.

   It is possible to draw samples from truncated distributions.  The
truncated domain can even be changed for an existing generator object
by an `unur_ninv_chg_truncated' call.

   Marginal generation times can be sped up by means of a table with
suitable starting points which can be created during the setup. Using
such a table can be switched on by means of a `unur_ninv_set_table'
call where the table size is given as a parameter. The table is still
useful when the (truncated) domain is changed often, since it is
computed for the domain of the given distribution. (It is not possible
to enlarge this domain.) If it is necessary to recalculate the table
during sampling, the command `unur_ninv_chg_table' can be used.  As a
rule of thumb using such a table is appropriate when the number of
generated points exceeds the table size by a factor of 100.

   The default number of iterations of NINV should be enough for all
reasonable cases. Nevertheless, it is possible to adjust the maximal
number of iterations with the commands `unur_ninv_set_max_iter' and
`unur_ninv_chg_max_iter'.  In particular this might be necessary when
the PDF has a pole or the distribution has extremely heavy tails.

   It is also possible to set/change the accuracy of the method (which
also heavily influencies the generation time).  We use two measures for
the approximation error which can be used independently: x-error and
u-error (*note Inversion:: for more details).  It is possible to set
the maximal tolerated error using with `unur_ninv_set_x_resolution' and
with `unur_ninv_set_u_resolution', resp., and change it with the
respective calls `unur_ninv_chg_x_resolution' and
`unur_ninv_chg_x_resolution'.  The algorithm tries to satisfy _both_
accuracy goals (and raises an error flag it this fails).  One of these
accuracy checks can be disabled by setting the accuracy goal to a
negative value.

   NINV tries to use proper starting values for both the regula falsi
and bisection method, and for Newton's method. Of course the user might
have more knowledge about the properties of the target distribution and
is able to share his wisdom with NINV using the respective commands
`unur_ninv_set_start' and `unur_ninv_chg_start'.  It is possible to
change the parameters and the domain of the chosen distribution and run
`unur_reinit' to reinitialize the generator object.  The values given
by the last `unur_ninv_chg_truncated' call will be then changed to the
values of the domain of the underlying distribution object. It is
important to note that for a distribution from the UNU.RAN library of
standard distributions (*note Standard distributions: Stddist.)  the
normalization constant has to be updated using the
`unur_distr_cont_upd_pdfarea' call whenever its parameters have been
changed by means of a `unur_distr_cont_set_pdfparams' call.

   It might happen that NINV aborts `unur_sample_cont' without
computing the correct value (because the maximal number iterations has
been exceeded). Then the last approximate value for x is returned (with
might be fairly false) and `unur_error' is set to
`UNUR_ERR_GEN_SAMPLING'.

Function reference
------------------

 -- Function: UNUR_PAR* unur_ninv_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_ninv_set_useregula (UNUR_PAR* PARAMETERS)
     Switch to regula falsi combined with interval bisectioning.  (This
     the default.)

 -- Function: int unur_ninv_set_usenewton (UNUR_PAR* PARAMETERS)
     Switch to Newton's method.  Notice that it is numerically less
     stable than regula falsi.  It it is not possible to invert the CDF
     for a particular uniform random number U when calling
     `unur_sample_cont', `unur_error' is set to `UNUR_ERR_GEN_SAMPLING'.
     Thus it is recommended to check `unur_error' before using the
     result of the sampling routine.

 -- Function: int unur_ninv_set_usebisect (UNUR_PAR* PARAMETERS)
     Switch to bisection method. This is a slow algorithm and should
     only be used as a last resort.

 -- Function: int unur_ninv_set_max_iter (UNUR_PAR* PARAMETERS, int
          MAX_ITER)
 -- Function: int unur_ninv_chg_max_iter (UNUR_GEN* GENERATOR, int
          MAX_ITER)
     Set and change number of maximal iterations.  Default is `100'.

 -- Function: int unur_ninv_set_x_resolution (UNUR_PAR* PARAMETERS,
          double X_RESOLUTION)
 -- Function: int unur_ninv_chg_x_resolution (UNUR_GEN* GENERATOR,
          double X_RESOLUTION)
     Set and change the maximal tolerated relative x-error.  If
     X_RESOLUTION is negative then checking of the x-error is disabled.

     Default is `1.e-8'.

 -- Function: int unur_ninv_set_u_resolution (UNUR_PAR* PARAMETERS,
          double U_RESOLUTION)
 -- Function: int unur_ninv_chg_u_resolution (UNUR_GEN* GENERATOR,
          double U_RESOLUTION)
     Set and change the maximal tolerated (abolute) u-error.  If
     U_RESOLUTION is negative then checking of the u-error is disabled.

     Default is `-1' (disabled).

 -- Function: int unur_ninv_set_start (UNUR_PAR* PARAMETERS, double
          LEFT, double RIGHT)
     Set starting points.  If not set, suitable values are chosen
     automatically.

     Newton:       LEFT:         starting point
     Regula        LEFT, RIGHT:  boundary of starting interval
     falsi:                      

     If the starting points are not set then the follwing points are
     used by default:
     Newton:       LEFT:         CDF(LEFT) = 0.5
     Regula        LEFT:         CDF(LEFT) = 0.1
     falsi:                      
                   RIGHT:        CDF(RIGHT) = 0.9

     If LEFT == RIGHT, then  UNU.RAN always uses the default starting
     points!

 -- Function: int unur_ninv_chg_start (UNUR_GEN* GEN, double LEFT,
          double RIGHT)
     Change the starting points for numerical inversion.  If
     left==right, then UNU.RAN uses the default starting points (see
     `unur_ninv_set_start' ).

 -- Function: int unur_ninv_set_table (UNUR_PAR* PARAMETERS, int
          NO_OF_POINTS)
     Generates a table with NO_OF_POINTS points containing suitable
     starting values for the iteration. The value of NO_OF_POINTS must
     be at least 10 (otherwise it will be set to 10 automatically).

     The table points are chosen such that the CDF at these points form
     an equidistance sequence in the interval (0,1).

     If a table is used, then the starting points given by
     `unur_ninv_set_start' are ignored.

     No table is used by default.

 -- Function: int unur_ninv_chg_table (UNUR_GEN* GEN, int NO_OF_POINTS)
     Recomputes a table as described in `unur_ninv_set_table'.

 -- Function: int unur_ninv_chg_truncated (UNUR_GEN* GEN, double LEFT,
          double RIGHT)
     Changes the borders of the domain of the (truncated) distribution.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call.  Moreover the starting point(s) will
     not be changed.

     _Important:_ If the CDF is (almost) the same for LEFT and RIGHT
     and (almost) equal to `0' or `1', then the truncated domain is
     _not_ chanced and the call returns an error code.

     _Notice:_ If the parameters of the distribution has been changed
     by a `unur_distr_cont_set_pdfparams' call it is recommended to set
     the truncated domain again, since the former call might change the
     domain of the distribution but not update the values for the
     boundaries of the truncated distribution.

 -- Function: double unur_ninv_eval_approxinvcdf (const UNUR_GEN*
          GENERATOR, double U)
     Get approximate approximate value of inverse CDF at U.  If U is
     out of the domain [0,1] then `unur_errno' is set to
     `UNUR_ERR_DOMAIN' and the respective bound of the domain of the
     distribution are returned (which is `-UNUR_INFINITY' or
     `UNUR_INFINITY' in the case of unbounded domains).

     _Notice_: This function always evaluates the inverse CDF of the
     given distribution. A call to `unur_ninv_chg_truncated' call has
     no effect.


File: unuran.info,  Node: NROU,  Next: PINV,  Prev: NINV,  Up: Methods_for_CONT

5.3.11 NROU  -  Naive Ratio-Of-Uniforms method
----------------------------------------------

Required:
     PDF

Optional:
     mode, center, bounding rectangle for acceptance region

Speed:
     Set-up: slow or fast, Sampling: moderate

Reinit:
     supported

Reference:
     [HLD04: Sect.2.4 and Sect.6.4]



   NROU is an implementation of the (generalized) ratio-of-uniforms
method which uses (minimal) bounding rectangles, see *note
Ratio-of-Uniforms::. It uses a positive control parameter r for
adjusting the algorithm to the given distribution to improve
performance and/or to make this method applicable.  Larger values of r
increase the class of distributions for which the method works at the
expense of a higher rejection constant. For computational reasons r=1
should be used if possible (this is the default).  Moreover, this
implementation uses the center mu of the distribution (see
`unur_distr_cont_get_center' for details of its default values).

   For the special case with r=1 the coordinates of the minimal
bounding rectangles are given by

     v^+ = sup_(x) sqrt(PDF(x)),
     u^- = inf_(x) (x- mu) sqrt(PDF(x)),
     u^+ = sup_(x) (x- mu) sqrt(PDF(x)),

where mu is the center of the distribution.  For other values of r we
have

     v^+ = sup_(x) (PDF(x))^(1/(r+1)),
     u^- = inf_(x) (x- mu) (PDF(x))^(r/(r+1)),
     u^+ = sup_(x) (x- mu) (PDF(x))^(r/(r+1)).

These bounds can be given directly. Otherwise they are computed
automatically by means of a (slow) numerical routine.  Of course this
routine can fail, especially when this rectangle is not bounded.

   It is important to note that the algorithm works with PDF(x- mu)
instead of PDF(x).  This is important as otherwise the acceptance
region can become a very long and skinny ellipsoid along a diagonal of
the (huge) bounding rectangle.

How To Use
..........

For using the NROU method UNU.RAN needs the PDF of the distribution.
Additionally, the parameter r can be set via a `unur_vnrou_set_r' call.
Notice that the acceptance probability decreases when r is increased.
On the other hand is is more unlikely that the bounding rectangle does
not exist if r is small.

   A bounding rectangle can be given by the `unur_vnrou_set_u' and
`unur_vnrou_set_v' calls.

   _Important:_ The bounding rectangle has to be provided for the
function PDF(x-center)!  Notice that `center' is the center of the given
distribution, see `unur_distr_cont_set_center'.  If in doubt or if this
value is not optimal, it can be changed (overridden) by a
`unur_nrou_set_center' call.

   If the coordinates of the bounding rectangle are not provided by the
user then the minimal bounding rectangle is computed automatically.

   By means of `unur_vnrou_set_verify' and `unur_vnrou_chg_verify' one
can run the sampling algorithm in a checking mode, i.e., in every cycle
of the rejection loop it is checked whether the used rectangle indeed
enclosed the acceptance region of the distribution. When in doubt
(e.g., when it is not clear whether the numerical routine has worked
correctly) this can be used to run a small Monte Carlo study.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that derived parameters like the mode must also be (re-) set if
the parameters or the domain has be changed.  Notice, however, that
then the values that has been set by `unur_vnrou_set_u' and
`unur_vnrou_set_v' calls are removed and the coordinates of the
bounding box are computed numerically.

Function reference
------------------

 -- Function: UNUR_PAR* unur_nrou_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_nrou_set_u (UNUR_PAR* PARAMETERS, double UMIN,
          double UMAX)
     Sets left and right boundary of bounding rectangle.  If no values
     are given, the boundary of the minimal bounding rectangle is
     computed numerically.

     _Notice_: Computing the minimal bounding rectangle may fail under
     some circumstances. Moreover, for multimodal distributions the
     bounds might be too small as only local extrema are computed.
     Nevertheless, for T_c -concave distributions with c=-1/2 it should
     work.

     _Important:_ The bounding rectangle that has to be provided is for
     the function PDF(x-center)!

     Default: not set.

 -- Function: int unur_nrou_set_v (UNUR_PAR* PARAMETERS, double VMAX)
     Set upper boundary for bounding rectangle. If this value is not
     given then sqrt(PDF(mode)) is used instead.

     _Notice_: When the mode is not given for the distribution object,
     then it will be computed numerically.

     Default: not set.

 -- Function: int unur_nrou_set_r (UNUR_PAR* PARAMETERS, double R)
     Sets the parameter R of the generalized ratio-of-uniforms method.

     _Notice_: This parameter must satisfy R>0.

     Default: `1'.

 -- Function: int unur_nrou_set_center (UNUR_PAR* PARAMETERS, double
          CENTER)
     Set the center (mu ) of the PDF.  If not set the center of the
     given distribution object is used.

     Default: see `unur_distr_cont_set_center'.

 -- Function: int unur_nrou_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
     Turn verifying of algorithm while sampling on/off.

     If the condition PDF(x) <= hat(x) is violated for some x then
     `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However, notice
     that this might happen due to round-off errors for a few values of
     x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_nrou_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Change the verifying of algorithm while sampling on/off.


File: unuran.info,  Node: PINV,  Next: SROU,  Prev: NROU,  Up: Methods_for_CONT

5.3.12 PINV  -  Polynomial interpolation based INVersion of CDF
---------------------------------------------------------------

Required:
     PDF

Optional:
     domain, center, CDF, derivative of PDF

Speed:
     Set-up: (very) slow, Sampling: (very) fast

Reinit:
     not implemented

Reference:
     [DHLa08]



   PINV is a variant of numerical inversion, where the inverse CDF is
approximated using Newton's interpolating formula.  The interval [0,1]
is split into several subintervals. In each of these the inverse CDF is
constructed at nodes (CDF(x),x) for some points x in this subinterval.
If the PDF is given, then the CDF is computed numerically from the
given PDF using adaptive Gauss-Lobatto integration with 5 points.
Subintervals are split until the requested accuracy goal is reached.

   The method is not exact, as it only produces random variates of the
approximated distribution. Nevertheless, the maximal tolerated
approximation error can be set to be the resolution (but of course is
bounded by the machine precision).  We use the u-error |U-CDF(X)| to
measure the error for X = "approximate inverse CDF"(U).  Notice that
very small values of the u-resolution are possible but increase the
cost for the setup step.  We call the maximal tolerated u-error the
_u-resolution_ of the algorithm in the sequel.

   Both the order of the interpolating polynomial and the u-resolution
can be selected.

   The interpolating polynomials have to be computed in a setup step.
However, it only works for distributions with bounded domain; for
distributions with unbounded domain the tails are cut off such that the
probability for the tail regions is small compared to the given
u-resolution.

   The construction of the interpolation polynomial only works when the
PDF is unimodal or when the PDF does not vanish between two modes.

   There are some restrictions for the given distribution:
   * The support of the distribution (i.e., the region where the PDF is
     strictly positive) must be connected. In practice this means, that
     the region where PDF is "not too small" must be connected.
     Unimodal densities satisfy this condition.  If this condition is
     violated then the domain of the distribution might be truncated.

   * When the PDF is integrated numerically, then the given PDF must be
     continuous and should be smooth.

   * The PDF must be bounded.

   * The algorithm has problems when the distribution has heavy tails
     (as then the inverse CDF becomes very steep at 0 or 1) and the
     requested u-resolution is very small.  E.g., the Cauchy
     distribution is likely to show this problem when the requested
     u-resolution is less then `1.e-12'.
   Regions with very small PDF values or heavy tails might lead to an
abortion of the set-up or (even worse) the approximation error might
become larger than requested, since the (computation of the)
interpolating polynomial becomes numerically unstable.

   _Remark:_ We also have implemented experimental variants.  However,
we observed that these variants are more sensitive to round-off errors,
especially in the right hand tail and we _do not recommend_ their usage
unless there are severe reasons.

   - Use a function that implements the CDF instead of numerical
     integration of the PDF.

   - Use Hermite interpolation instead of Newton interpolation.  Thus
     the first (and second) derivative of the interpolating polynomial
     coincides with that of the inverse CDF.  Consequently the
     interpolant is also (twice) differentiable even at the interval
     boundaries.  This variant can be seen as limiting case of Newton
     interpolation with double (or triple) points as nodes.

     We have used a _smoothness_ parameter to control this feature.
     However, besides numerical problems we observed that this variant
     requires more intervals and thus larger setup times and higher
     memory consumptions.

How To Use
..........

PINV works for continuous univariate distribution objects with given
PDF. The corresponding distribution object should contain a typical
point of the distribution, i.e., a point where the PDF is not too
small, e.g., (a point near) the mode.  However, it is important that
the center is *not* the pole of the distribution (or a point too close
to the pole).  It can be set using a `unur_distr_cont_set_center' or a
`unur_distr_cont_set_mode' call. If neither is set, or if the given
center cannot be used, then a simple search routine tries to find an
appropriate point for the center.

   It is recommended that the domain of the distribution with bounded
domain is specified using a `unur_distr_cont_set_domain' call.
Otherwise, the boundary is searched numerically which might be rather
expensive, especially when this boundary point is `0'.

   When sampling from truncated distributions with extreme truncation
points, it is recommended to provide the log-density using
`unur_distr_cont_set_logpdf' and the mode.  Then the PDF is rescaled
such that the PDF at the mode is 1.  Thus the algorithm is numerically
more stable.

   The inverse CDF is interpolated using Newton polynomials.  The order
of this polynomial can be set by means of a `unur_pinv_set_order' call.

   The smoothness of the interpolant at interval boundaries can be
controlled using a `unur_pinv_set_smoothness' call.  Then Hermite
interpolation instead of Newton interpolation is used. (The former can
be seen as a limiting case of Newton interpolation with double (or
triple) points.)  However, using higher smoothness is _not recommended_
unless differentiability at the interval boundaries is important.

   For distributions with unbounded domains the tails are cut off such
that the probability for the tail regions is small compared to the
given u-resolution. For finding these cut points the algorithm starts
with the region `[-1.e100,1.e100]'. For the exceptional case where this
does not work these starting points can be changed via a
`unur_pinv_set_boundary' call.

   This method is not exact, as it only produces random variates of the
approximated distribution. Nevertheless, the numerical error in
"u-direction" (i.e., |U-CDF(X)|, for X = "approximate inverse CDF"(U)
|U-CDF(X)|) can be controlled by means of `unur_pinv_set_u_resolution'.
However, the maximal error of this approximation is only estimated. For
very small u-resolutions the actual approximation error might be
(slightly) larger than the requested u-resolution.  (Of course the size
of this value depends on the given PDF.)  If this error is crucial for
an application we recommend to compute this error using
`unur_pinv_estimate_error' which runs a small Monte Carlo simulation.
See also the documentation for function `unur_pinv_set_u_resolution'
and the remark given there.

   The number of required subintervals heavily depends on the order of
the interpolating polynomial and the requested u-resolution: it
increases when order or u-resolution are decreased.  It can be checked
using a `unur_pinv_get_n_intervals' call.  The maximum number of such
subintervals is fixed but can be increased using a
`unur_pinv_set_max_intervals' call.  If this maximum number is too
small then the set-up aborts with a corresponding error message.

   It is also possible to use the CDF of the distribution instead of
the PDF. Then the distribution object must contain a pointer to the
CDF. Moreover, this variant of the algorithm has to be switched on
using an `unur_pinv_set_usecdf' call.  Notice, however, that the setup
for this variant is numerically less stable than using integration of
the PDF (the default variant). Thus using the CDF is _not recommended_.

Function reference
------------------

 -- Function: UNUR_PAR* unur_pinv_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_pinv_set_order (UNUR_PAR* PARAMETERS, int ORDER)
     Set order of interpolation. Valid orders are between `3' and `17'.
     Higher orders result in fewer intervals for the approximations.

     Default: `5'.

 -- Function: int unur_pinv_set_smoothness (UNUR_PAR* PARAMETERS, int
          SMOOTHNESS)
     Set smoothness of interpolant. By construction the interpolant is
     piecewise polynomial and thus smooth on each of the intervals
     where these polynomials are constructed. At the interval
     boundaries, however, it usually not be differentiable.  Method
     PINV also implements variants of Newton interpolation where the
     first (or second) derivative of the interpolating polynomial
     coincides with the respective derivative of the inverse CDF at the
     nodes. The the interpolant is (twice) differentiable even at the
     interval boundaries.  These variants can be seen as limiting case
     of Newton interpolation with double (or triple) points as nodes
     and are known as Hermite interpolation.

     Possible values for SMOOTHNESS:

     Value   Effect            Requirements
     ------------------------------------------------------------------- 
     `0'     continuous        requires PDF (or CDF)
     `1'     differentiable    requires PDF (optional: CDF),
                               order of polynomial must be odd
     `2'     twice             requires PDF and its derivative
             differentiable    (optional: CDF),
                               order must be 5, 8, 11, 14 or 17

     If the order of the polynomial does not satisfy the given
     condition, then it is increased to the next larger possible value.

     _Remark:_ A higher smoothness parameter usually results in a
     higher number of intervals and thus a higher setup time and memory
     consumption.  We also observed that higher smoothness parameters
     make the algorithm more sensible for round-off error. Then the
     setup fails.

     _Remark:_ If the interpolating polynomial cannot be constructed
     for the requested smoothness on a particular interval, then the
     smoothness parameter is reduced for that interval.

     _Remark:_ For order `3' and smoothness `1' (cubic Hermite
     interpolation) monotonicity is guaranteed by checking a simple
     monotonicity condition for the coefficients of the polynomials.

     _Remark:_ Using SMOOTHNESS larger than `0' is _not recommended_
     unless differentiability at the interval boundaries is important
     for ones application.

     Default: `0'.

 -- Function: int unur_pinv_set_u_resolution (UNUR_PAR* PARAMETERS,
          double U_RESOLUTION)
     Set maximal tolerated u-error. Values of U_RESOLUTION must at
     least `1.e-15' and `1.e-5' at most.  Notice that the resolution of
     most uniform random number sources is 2^(-32) = `2.3e-10'. Thus a
     value of `1.e-10' leads to an inversion algorithm that could be
     called exact. For most simulations slightly bigger values for the
     maximal error are enough as well.

     Smaller values for U_RESOLUTION increase the number of subinterval
     that are necessary for the approximation of the inverse CDF. For
     very small values (less then `1.e-12') this number might exceed
     the maximum number of such intervals. However, this number can be
     increased using a `unur_pinv_set_max_intervals' call.

     _Remark:_ We ran many experiments and found that the observed
     u-error was always smaller than the given U_RESOLUTION whenever
     this value was `1.e-12'. For values smaller than `1e-13' the
     maximal observed u-error was slightly larger. One use `1.e-15' if
     best approximation is required. However, then the actual u-error
     can be as large as `1.e-14'.

     *Warning!* These figures are based on our experiments (with some
     tolerance added to be on the safe side). There is no guarantee for
     these error estimates for a particular distribution.

     Default is `1.e-10'.

 -- Function: int unur_pinv_set_use_upoints (UNUR_PAR* PARAMETERS, int
          USE_UPOINTS)
     If USE_UPOINTS is `TRUE', then the nodes of the interpolating
     polynomial are constructed by means of Chebyshev points in u-scale
     not in x-scale. This results is a better approximation but almost
     doubles the number of PDF or CDF evaluations during the setup.
     (This is an experimental feature.)

     Default: `FALSE'

 -- Function: int unur_pinv_set_usepdf (UNUR_PAR* PARAMETERS)
     Use PDF (if available) to compute approximate inverse CDF.

     This is the default.

 -- Function: int unur_pinv_set_usecdf (UNUR_PAR* PARAMETERS)
     Use CDF (if available) to compute approximate inverse CDF.  This
     variant is intend for running experiments with method PINV.

     _Remark:_ We ran many experiments and found that for small values
     of the given U_RESOLUTION (less than `1.e-12') the setup fails for
     distributions with heavy tails. We found that using the PDF
     (instead of the CDF) is numerically more stable.  This is
     especially the case when the smoothness parameter is set to `1' or
     `2'.

     Using the CDF is *not recommended*.

 -- Function: int unur_pinv_set_boundary (UNUR_PAR* PARAMETERS, double
          LEFT, double RIGHT)
     Set LEFT and RIGHT point for finding the cut-off points for the
     "computational domain", i.e., the domain that covers the essential
     part of the distribution.  The cut-off points are computed such
     that the tail probabilities are smaller than given by
     `unur_pinv_set_u_resolution'.  It is usually safe to use a large
     interval.  However, `+/- UNUR_INFINITY' is not allowed.

     _Important_: This call does not change the domain of the given
     distribution itself. But it restricts the domain for the resulting
     random variates.

     Default: intersection of `[-1.e100,+1.e100]' and the given domain
     of the distribution.

 -- Function: int unur_pinv_set_searchboundary (UNUR_PAR* PARAMETERS,
          int LEFT, int RIGHT)
     If LEFT or RIGHT is set to `FALSE' then the respective boundary as
     given by a `unur_pinv_set_boundary' call is used without any
     further computations.  However, these boundary points might cause
     numerical problems during the setup when PDF returns `0' "almost
     everywhere".  If set to `TRUE' (the default) then the
     computational interval is shortened to a more sensible region by
     means of a search algorithm.  Switching off this search is useful,
     e.g., for the Gamma(2) distribution where the left border `0' is
     fixed and finite.

     _Remark:_ The searching algorithm assumes that the support of the
     distribution is connected.

     _Remark:_ Do not set this parameter to `FALSE' except when
     searching for cut-off points fails and one wants to try with
     precomputed values.

     Default: `TRUE'.

 -- Function: int unur_pinv_set_max_intervals (UNUR_PAR* PARAMETERS,
          int MAX_IVS)
     Set maximum number of intervals. MAX_IVS must be at least `100'
     and at most `1000000'.

     Default is `10000'.

 -- Function: int unur_pinv_get_n_intervals (const UNUR_GEN* GENERATOR)
     Get number of intervals used for interpolation in the generator
     object.  It returns `0' in case of an error.

 -- Function: int unur_pinv_set_keepcdf (UNUR_PAR* PARAMETERS, int
          KEEPCDF)
     If the PDF is given, then the CDF is computed numerically from the
     given PDF using adaptive Gauss-Lobatto integration.  Thus a table
     of CDF points is stored to keep the number of evaluations of the
     PDF minimal. Usually this table is discarded when the setup is
     completed.  If KEEPCDF is `TRUE', then this table is kept and can
     be used to compute the CDF of the underlying distribution by means
     of function `unur_pinv_eval_approxcdf'.  This option is ignored
     when `unur_pinv_set_usecdf' is called.

     Default: `FALSE'

 -- Function: double unur_pinv_eval_approxinvcdf (const UNUR_GEN*
          GENERATOR, double U)
     Evaluate interpolation of inverse CDF at U.  If U is out of the
     domain (0,1) then `unur_errno' is set to `UNUR_ERR_DOMAIN' and the
     respective bound of the domain of the distribution are returned
     (which is `-UNUR_INFINITY' or `UNUR_INFINITY' in the case of
     unbounded domains).

 -- Function: double unur_pinv_eval_approxcdf (const UNUR_GEN*
          GENERATOR, double X)
     Evaluate (approximate) CDF at X. If the PDF of the distribution is
     given, then adaptive Gauss-Lobatto integration is used to compute
     the CDF.  If the PDF is used to create the generator object, then
     the table of integral values must not removed at the end of setup
     and thus `unur_pinv_set_keepcdf' must be called.

 -- Function: int unur_pinv_estimate_error (const UNUR_GEN* GENERATOR,
          int SAMPLESIZE, double* MAX_ERROR, double* MAE)
     Estimate maximal u-error and mean absolute error (MAE) for
     GENERATOR by means of Monte-Carlo simulation with sample size
     SAMPLESIZE.  The results are stored in MAX_ERROR and MAE,
     respectively.

     It returns `UNUR_SUCCESS' if successful.


File: unuran.info,  Node: SROU,  Next: SSR,  Prev: PINV,  Up: Methods_for_CONT

5.3.13 SROU  -  Simple Ratio-Of-Uniforms method
-----------------------------------------------

Required:
     T-concave PDF, mode, area

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [LJa01] [LJa02] [HLD04: Sect.6.3.1; Sect.6.3.2; Sect.6.4.1;
     Alg.6.4; Alg.6.5; Alg.6.7]



   SROU is based on the ratio-of-uniforms method (*note
Ratio-of-Uniforms::) that uses universal inequalities for constructing
a (universal) bounding rectangle.  It works for all T-concave
distributions, including log-concave and T-concave distributions with
T(x) = -1/sqrt(x).

   Moreover an (optional) parameter `r' can be given, to adjust the
generator to the given distribution. This parameter is strongly related
to the parameter `c' for transformed density rejection (*note TDR::)
via the formula c = -r/(r+1). The rejection constant increases with
higher values for `r'. On the other hand, the given density must be T_c
-concave for the corresponding c.  The default setting for `r' is 1
which results in a very simple code. (For other settings, sampling
uniformly from the acceptance region is more complicated.)

   Optionally the CDF at the mode can be given to increase the
performance of the algorithm. Then the rejection constant is reduced by
1/2 and (if `r=1') even a universal squeeze can (but need not be) used.
A way to increase the performance of the algorithm when the CDF at the
mode is not provided is the usage of the mirror principle (only if
`r=1'). However, using squeezes and using the mirror principle is only
recommended when the PDF is expensive to compute.

   The exact location of the mode and/or the area below the PDF can be
replace by appropriate bounds. Then the algorithm still works but has
larger rejection constants.

How To Use
..........

SROU works for any continuous univariate distribution object with given
T_c -concave PDF with c<1, ) mode and area below PDF. Optional the CDF
at the mode can be given to increase the performance of the algorithm by
means of the `unur_srou_set_cdfatmode' call. Additionally squeezes can
be used and switched on via `unur_srou_set_usesqueeze' (only if `r=1').
A way to increase the performance of the algorithm when the CDF at the
mode is not provided is the usage of the mirror principle which can be
swithced on by means of a `unur_srou_set_usemirror' call (only if
`r=1') .  However using squeezes and using the mirror principle is only
recommended when the PDF is expensive to compute.

   The parameter `r' can be given, to adjust the generator to the given
distribution. This parameter is strongly related parameter `c' for
transformed density rejection via the formula c = -r/(r+1).  The
parameter `r' can be any value larger than or equal to 1. Values less
then 1 are automatically set to 1.  The rejection constant depends on
the chosen parameter `r' but not on the particular distribution. It is
4 for `r' equal to 1 and higher for higher values of `r'.  It is
important to note that different algorithms for different values of
`r': If `r' equal to 1 this is much faster than the algorithm for `r'
greater than 1.  The default setting for `r' is 1.

   If the (exact) area below the PDF is not known, then an upper bound
can be used instead (which of course increases the rejection constant).
But then the squeeze flag must not be set and `unur_srou_set_cdfatmode'
must not be used.

   If the exact location of the mode is not known, then use the
approximate location and provide the (exact) value of the PDF at the
mode by means of the `unur_srou_set_pdfatmode' call. But then
`unur_srou_set_cdfatmode' must not be used. Notice, that a (slow)
numerical mode finder will be used if no mode is given at all.  It is
even possible to give an upper bound for the PDF only.  However, then
the (upper bound for the) area below the PDF has to be multiplied by
the ratio between the upper bound and the lower bound of the PDF at the
mode.  Again setting the squeeze flag and using
`unur_srou_set_cdfatmode' is not allowed.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that derived parameters like the mode must also be (re-) set if
the parameters or the domain has be changed.  Moreover, if the PDF at
the mode has been provided by a `unur_srou_set_pdfatmode' call,
additionally `unur_srou_chg_pdfatmode' must be used (otherwise this
call is not necessary since then this figure is computed directly from
the PDF).

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not while sampling. It can be switched on
by calling `unur_srou_set_verify' and `unur_srou_chg_verify',
respectively. Notice however that sampling is (a little bit) slower
then.

Function reference
------------------

 -- Function: UNUR_PAR* unur_srou_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_srou_set_r (UNUR_PAR* PARAMETERS, double R)
     Set parameter R for transformation.  Only values greater than or
     equal to 1 are allowed.  The performance of the generator
     decreases when R is increased. On the other hand R must not be set
     to small, since the given density must be T_c-concave for c =
     -r/(r+1).

     _Notice:_ If R is set to `1' a simpler and much faster algorithm
     is used then for R greater than one.

     For computational reasons values of R that are greater than `1'
     but less than `1.01' are always set to `1.01'.

     Default is `1'.

 -- Function: int unur_srou_set_cdfatmode (UNUR_PAR* PARAMETERS, double
          FMODE)
     Set CDF at mode.  When set, the performance of the algorithm is
     increased by factor 2.  However, when the parameters of the
     distribution are changed `unur_srou_chg_cdfatmode' has to be used
     to update this value.

     Default: not set.

 -- Function: int unur_srou_set_pdfatmode (UNUR_PAR* PARAMETERS, double
          FMODE)
     Set pdf at mode.  When set, the PDF at the mode is never changed.
     This is to avoid additional computations, when the PDF does not
     change when parameters of the distributions vary.  It is only
     useful when the PDF at the mode does not change with changing
     parameters of the distribution.

     _IMPORTANT:_ This call has to be executed after a possible call of
     `unur_srou_set_r'.  Default: not set.

 -- Function: int unur_srou_set_usesqueeze (UNUR_PAR* PARAMETERS, int
          USESQUEEZE)
     Set flag for using universal squeeze (default: off).  Using
     squeezes is only useful when the evaluation of the PDF is
     (extremely) expensive.  Using squeezes is automatically disabled
     when the CDF at the mode is not given (then no universal squeezes
     exist).

     Squeezes can only be used if `r=1'.

     Default is `FALSE'.

 -- Function: int unur_srou_set_usemirror (UNUR_PAR* PARAMETERS, int
          USEMIRROR)
     Set flag for using mirror principle (default: off).  Using the
     mirror principle is only useful when the CDF at the mode is not
     known and the evaluation of the PDF is rather cheap compared to
     the marginal generation time of the underlying uniform random
     number generator.  It is automatically disabled when the CDF at
     the mode is given.  (Then there is no necessity to use the mirror
     principle. However disabling is only done during the
     initialization step but not at a re-initialization step.)

     The mirror principle can only be used if `r=1'.

     Default is `FALSE'.

 -- Function: int unur_srou_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_srou_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_srou_chg_cdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change CDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.

 -- Function: int unur_srou_chg_pdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change PDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.


File: unuran.info,  Node: SSR,  Next: TABL,  Prev: SROU,  Up: Methods_for_CONT

5.3.14 SSR  -  Simple Setup Rejection
-------------------------------------

Required:
     T-concave PDF, mode, area

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [LJa01] [HLD04: Sect.6.3.3; Alg.6.6]



   SSR is an acceptance/rejection method that uses universal
inequalities for constructing (universal) hats and squeezes (*note
Rejection::).  It works for all T-concave distributions with T(x) =
-1/sqrt(x).

   It requires the PDF, the (exact) location of the mode and the area
below the given PDF. The rejection constant is 4 for all T-concave
distributions with unbounded domain and is less than 4 when the domain
is bounded. Optionally the CDF at the mode can be given to increase the
performance of the algorithm.  Then the rejection constant is at most 2
and a universal squeeze can (but need not be) used. However, using
squeezes is not recommended unless the evaluation of the PDF is
expensive.

   The exact location of the mode and/or the area below the PDF can be
replace by appropriate bounds. Then the algorithm still works but has
larger rejection constants.

How To Use
..........

SSR works for any continuous univariate distribution object with given
T-concave PDF (with T(x) = -1/sqrt(x),) mode and area below PDF.
Optional the CDF at the mode can be given to increase the performance
of the algorithm by means of the `unur_ssr_set_cdfatmode' call.
Additionally squeezes can be used and switched on via
`unur_ssr_set_usesqueeze'.  If the (exact) area below the PDF is not
known, then an upper bound can be used instead (which of course
increases the rejection constant).  But then the squeeze flag must not
be set and `unur_ssr_set_cdfatmode' must not be used.

   If the exact location of the mode is not known, then use the
approximate location and provide the (exact) value of the PDF at the
mode by means of the `unur_ssr_set_pdfatmode' call. But then
`unur_ssr_set_cdfatmode' must not be used. Notice, that a (slow)
numerical mode finder will be used if no mode is given at all.  It is
even possible to give an upper bound for the PDF only.  However, then
the (upper bound for the) area below the PDF has to be multiplied by
the ratio between the upper bound and the lower bound of the PDF at the
mode.  Again setting the squeeze flag and using `unur_ssr_set_cdfatmode'
is not allowed.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that derived parameters like the mode must also be (re-) set if
the parameters or the domain has be changed.  Moreover, if the PDF at
the mode has been provided by a `unur_ssr_set_pdfatmode' call,
additionally `unur_ssr_chg_pdfatmode' must be used (otherwise this call
is not necessary since then this figure is computed directly from the
PDF).

   _Important:_ If any of mode, PDF or CDF at the mode, or the area
below the mode has been changed, then `unur_reinit' must be executed.
(Otherwise the generator produces garbage).

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not while sampling. It can be switched
on/off by calling `unur_ssr_set_verify' and `unur_ssr_chg_verify',
respectively.  Notice, however, that sampling is (a little bit) slower
then.

Function reference
------------------

 -- Function: UNUR_PAR* unur_ssr_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_ssr_set_cdfatmode (UNUR_PAR* PARAMETERS, double
          FMODE)
     Set CDF at mode.  When set, the performance of the algorithm is
     increased by factor 2.  However, when the parameters of the
     distribution are changed `unur_ssr_chg_cdfatmode' has to be used
     to update this value.

     Default: not set.

 -- Function: int unur_ssr_set_pdfatmode (UNUR_PAR* PARAMETERS, double
          FMODE)
     Set pdf at mode.  When set, the PDF at the mode is never changed.
     This is to avoid additional computations, when the PDF does not
     change when parameters of the distributions vary.  It is only
     useful when the PDF at the mode does not change with changing
     parameters for the distribution.

     Default: not set.

 -- Function: int unur_ssr_set_usesqueeze (UNUR_PAR* PARAMETERS, int
          USESQUEEZE)
     Set flag for using universal squeeze (default: off).  Using
     squeezes is only useful when the evaluation of the PDF is
     (extremely) expensive.  Using squeezes is automatically disabled
     when the CDF at the mode is not given (then no universal squeezes
     exist).

     Default is `FALSE'.

 -- Function: int unur_ssr_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_ssr_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_ssr_chg_cdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change CDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.

 -- Function: int unur_ssr_chg_pdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change PDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.


File: unuran.info,  Node: TABL,  Next: TDR,  Prev: SSR,  Up: Methods_for_CONT

5.3.15 TABL  -  a TABLe method with piecewise constant hats
-----------------------------------------------------------

Required:
     PDF, all local extrema, cut-off values for the tails

Optional:
     approximate area

Speed:
     Set-up: (very) slow, Sampling: fast

Reinit:
     not implemented

Reference:
     [AJa93] [AJa95] [HLD04: Cha.5.1]



   TABL (called Ahrens method in [HLD04] ) is an acceptance/rejection
method (*note Rejection::) that uses a decomposition of the domain of
the distribution into many short subintervals. Inside of these
subintervals constant hat and squeeze functions are utilized. Thus it
is easy to use the idea of immediate acceptance for points below the
squeeze. This reduces the expected number of uniform random numbers per
generated random variate to less than two. Using a large number of
subintervals only little more than one random number is necessary on
average. Thus this method becomes very fast.

   Due to the constant hat function this method only works for
distributions with bounded domains. Thus for unbounded domains the left
and right tails have to be cut off.  This is no problem when the
probability of falling into these tail regions is beyond computational
relevance (e.g. smaller than `1.e-12').

   For easy construction of hat and squeeze functions it is necessary
to know the regions of monotonicity (called _slopes_) or equivalently
all local maxima and minima of the density.  The main problem for this
method in the setup is the choice of the subintervals. A simple and
close to optimal approach is the "equal area rule" [HLD04: Cha.5.1] .
There the subintervals are selected such that the area below the hat is
the same for each subinterval which can be realized with a simple
recursion.  If more subintervals are necessary it is possible to split
either randomly chosen intervals (adaptive rejection sampling, ARS) or
those intervals, where the ratio between squeeze and hat is smallest.
This version of the setup is called derandomized ARS (DARS). With the
default settings TABL is first calculating approximately 30
subintervals with the equal area rule. Then DARS is used till the
desired fit of the hat is reached.

   A convenient measure to control the quality of the fit of hat and
squeeze is the ratio (area below squeeze)/(area below hat) called
`sqhratio' which must be smaller or equal to one.  The expected number
of iterations in the rejection algorithm is known to be smaller than
1/sqhratio and the expected number of evaluations of the density is
bounded by `1/sqhratio - 1'.  So values of the sqhratio close to one
(e.g. `0.95' or `0.99') lead to many subintervals. Thus a better fitting
hat is constructed and the sampling algorithm becomes fast; on the
other hand large tables are needed and the setup is very slow. For
moderate values of sqhratio (e.g. `0.9' or `0.8') the sampling is
slower but the required tables are smaller and the setup is not so slow.

   It follows from the above explanations that TABL is always requiring
a slow setup and that it is not very well suited for heavy-tailed
distributions.

How To Use
..........

For using the TABL method UNU.RAN needs a bounded interval to which the
generated variates can be restricted and information about all local
extrema of the distribution. For unimodal densities it is sufficient to
provide the mode of the distribution. For the case of a built-in
unimodal distribution with bounded domain all these information is
present in the distribution object and thus no extra input is necessary
(see example_TABL1 below).

   For a built-in unimodal distribution with unbounded domain we should
specify the cut-off values for the tails. This can be done with the
`unur_tabl_set_boundary' call (see example_TABL2 below). For the case
that we do not set these boundaries the default values of `+/- 1.e20'
are used. We can see in example_TABL1 that this still works fine for
many standard distributions.

   For the case of a multimodal distribution we have to set the regions
of monotonicity (called slopes) explicitly using the
`unur_tabl_set_slopes' command (see example_TABL3 below).

   To controll the fit of the hat and the size of the tables and thus
the speed of the setup and the sampling it is most convenient to use the
`unur_tabl_set_max_sqhratio' call. The default is `0.9' which is a
sensible value for most distributions and applications. If very large
samples of a distribution are required or the evaluation of a density
is very slow it may be useful to increase the sqhratio to eg. `0.95' or
even `0.99'. With the `unur_tabl_get_sqhratio' call we can check which
sqhratio was really reached. If that value is below the desired value
it is necessary to increase the maximal number of subintervals, which
defaults to `1000', using the `unur_tabl_set_max_intervals' call.  The
`unur_tabl_get_n_intervals' call can be used to find out the number of
subintervals the setup calculated.

   It is also possible to set the number of intervals and their
respective boundaries by means of the `unur_tabl_set_cpoints' call.

   It is also possible to use method TABL for correlation induction
(variance reduction) by setting of an auxiliary uniform random number
generator via the `unur_set_urng_aux' call. (Notice that this must be
done after a possible `unur_set_urng' call.)  However, this only works
when immediate acceptance is switched of by a `unur_tabl_set_variant_ia'
call.

Function reference
------------------

 -- Function: UNUR_PAR* unur_tabl_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_tabl_set_variant_ia (UNUR_PAR* PARAMETERS, int
          USE_IA)
     Use immediate acceptance when USE_IA is set to `TRUE'.  This
     technique requires less uniform. If it is set to `FALSE',
     "classical" acceptance/rejection from hat distribution is used.

     _Notice:_ Auxiliary uniform random number generators for
     correlation induction (variance reduction) can only be used when
     "classical" acceptance/rejection is used.

     Default: `TRUE'.

 -- Function: int unur_tabl_set_cpoints (UNUR_PAR* PARAMETERS, int
          N_CPOINTS, const DOUBLE* CPOINTS)
     Set construction points for the hat function. If STP is `NULL'
     than a heuristic rule of thumb is used to get N_STP construction
     points. This is the default behavior.

     The default number of construction points is `30'.

 -- Function: int unur_tabl_set_nstp (UNUR_PAR* PARAMETERS, int N_STP)
     Set number of construction points for the hat function. N_STP must
     be greater than zero. After the setup there are about N_STP
     construction points. However it might be larger when a small
     fraction is given by the `unur_tabl_set_areafraction' call.  It
     also might be smaller for some variants.

     Default is `30'.

 -- Function: int unur_tabl_set_useear (UNUR_PAR* PARAMETERS, int
          USEEAR)
     If USEEAR is set to `TRUE', the "equal area rule" is used, the
     given slopes are partitioned in such a way that the area below the
     hat function in each subinterval ("stripe") has the same area
     (except the last the last interval which can be smaller).  The
     area can be set by means of the `unur_tabl_set_areafraction' call.

     Default is `TRUE'.

 -- Function: int unur_tabl_set_areafraction (UNUR_PAR* PARAMETERS,
          double FRACTION)
     Set parameter for the equal area rule. During the setup a piecewise
     constant hat is constructed, such that the area below each of these
     pieces (strips) is the same and equal to the (given) area below the
     PDF times FRACTION (which must be greater than zero).

     _Important:_ If the area below the PDF is not set in the
     distribution object, then 1 is assumed.

     Default is `0.1'.

 -- Function: int unur_tabl_set_usedars (UNUR_PAR* PARAMETERS, int
          USEDARS)
     If USEDARS is set to `TRUE', "derandomized adaptive rejection
     sampling" (DARS) is used in the setup.  Intervals, where the area
     between hat and squeeze is too large compared to the average area
     between hat and squeeze over all intervals, are split.  This
     procedure is repeated until the ratio between squeeze and hat
     exceeds the bound given by `unur_tabl_set_max_sqhratio' call or the
     maximum number of intervals is reached. Moreover, it also aborts
     when no more intervals can be found for splitting.

     For finding splitting points the arc-mean rule (a mixture of
     arithmetic mean and harmonic mean) is used.

     Default is `TRUE'.

 -- Function: int unur_tabl_set_darsfactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for "derandomized adaptive rejection sampling".  This
     factor is used to determine the segments that are "too large",
     that is, all segments where the area between squeeze and hat is
     larger than FACTOR times the average area over all intervals
     between squeeze and hat.  Notice that all segments are split when
     FACTOR is set to `0.', and that there is no splitting at all when
     FACTOR is set to `UNUR_INFINITY'.

     Default is `0.99'. There is no need to change this parameter.

 -- Function: int unur_tabl_set_variant_splitmode (UNUR_PAR*
          PARAMETERS, unsigned SPLITMODE)
     There are three variants for adaptive rejection sampling. These
     differ in the way how an interval is split:
    splitmode `1'
          use the generated point to split the interval.

    splitmode `2'
          use the mean point of the interval.

    splitmode `3'
          use the arcmean point; suggested for distributions with heavy
          tails.

     Default is splitmode `2'.

 -- Function: int unur_tabl_set_max_sqhratio (UNUR_PAR* PARAMETERS,
          double MAX_RATIO)
     Set upper bound for the ratio (area below squeeze) / (area below
     hat).  It must be a number between 0 and 1.  When the ratio
     exceeds the given number no further construction points are
     inserted via DARS in the setup.

     For the case of ARS (unur_tabl_set_usedars() must be set to
     `FALSE'): Use `0' if no construction points should be added after
     the setup.  Use `1' if added new construction points should not be
     stopped until the maximum number of construction points is reached.
     If MAX_RATIO is close to one, many construction points are used.

     Default is `0.9'.

 -- Function: double unur_tabl_get_sqhratio (const UNUR_GEN* GENERATOR)
     Get the current ratio (area below squeeze) / (area below hat) for
     the generator.  (In case of an error `UNUR_INFINITY' is returned.)

 -- Function: double unur_tabl_get_hatarea (const UNUR_GEN* GENERATOR)
     Get the area below the hat for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: double unur_tabl_get_squeezearea (const UNUR_GEN*
          GENERATOR)
     Get the area below the squeeze for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: int unur_tabl_set_max_intervals (UNUR_PAR* PARAMETERS,
          int MAX_IVS)
     Set maximum number of intervals.  No construction points are added
     in or after the setup when the number of intervals suceeds MAX_IVS.

     Default is `1000'.

 -- Function: int unur_tabl_get_n_intervals (const UNUR_GEN* GENERATOR)
     Get the current number of intervals.  (In case of an error 0 is
     returned.)

 -- Function: int unur_tabl_set_slopes (UNUR_PAR* PARAMETERS, const
          DOUBLE* SLOPES, int N_SLOPES)
     Set slopes for the PDF.  A slope <a,b> is an interval [a,b] or
     [b,a] where the PDF is monotone and PDF(a) >= PDF(b).  The list of
     slopes is given by an array SLOPES where each consecutive tuple
     (i.e. `(slopes[0], slopes[1])', `(slopes[2], slopes[3])', etc.)
     defines one slope.  Slopes must be sorted (i.e. both `slopes[0]'
     and `slopes[1]' must not be greater than any entry of the slope
     `(slopes[2], slopes[3])', etc.)  and must not be overlapping.
     Otherwise no slopes are set and UNUR_ERRNO is set to
     `UNUR_ERR_PAR_SET'.

     _Notice:_ N_SLOPES is the number of slopes (and not the length of
     the array SLOPES).

     _Notice_ that setting slopes resets the given domain for the
     distribution. However, in case of a standard distribution the area
     below the PDF is not updated.

 -- Function: int unur_tabl_set_guidefactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for relative size of the guide table for indexed search
     (see also method DGT *note DGT::). It must be greater than or equal
     to `0'.  When set to `0', then sequential search is used.

     Default is `1'.

 -- Function: int unur_tabl_set_boundary (UNUR_PAR* PARAMETERS, double
          LEFT, double RIGHT)
     Set the left and right boundary of the computation interval.  The
     piecewise hat is only constructed inside this interval. The
     probability outside of this region must not be of computational
     relevance.  Of course `+/- UNUR_INFINITY' is not allowed.

     Default is `-1.e20,1.e20'.

 -- Function: int unur_tabl_chg_truncated (UNUR_GEN* GEN, double LEFT,
          double RIGHT)
     Change the borders of the domain of the (truncated) distribution.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call. The hat function will not be changed.

     _Important:_ The ratio between the area below the hat and the area
     below the squeeze changes when the sampling region is restricted.
     In particalur it becomes (very) large when sampling from the (far)
     tail of the distribution. Then it is better to create a generator
     object for the tail of distribution only.

     _Important:_ This call does not work for variant `IA' (immediate
     acceptance). In this case UNU.RAN switches _automatically_ to
     variant `RH' (use "classical" acceptance/rejection from hat
     distribution) and does revert to the variant originally set by the
     user.

     _Important:_ It is not a good idea to use adaptave rejection
     sampling while sampling from a domain that is a strict subset of
     the domain that has been used to construct the hat.  For that
     reason adaptive adding of construction points is _automatically
     disabled_ by this call.

     _Important:_ If the CDF of the hat is (almost) the same for LEFT
     and RIGHT and (almost) equal to `0' or `1', then the truncated
     domain is not changed and the call returns an error code.

 -- Function: int unur_tabl_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_tabl_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_tabl_set_pedantic (UNUR_PAR* PARAMETERS, int
          PEDANTIC)
     Sometimes it might happen that `unur_init' has been executed
     successfully. But when additional construction points are added by
     adaptive rejection sampling, the algorithm detects that the PDF is
     not monotone in the given slopes.

     With PEDANTIC being `TRUE', the sampling routine is exchanged by a
     routine that simply returns `UNUR_INFINITY' indicating an error.

     Default is `FALSE'.


File: unuran.info,  Node: TDR,  Next: UTDR,  Prev: TABL,  Up: Methods_for_CONT

5.3.16 TDR  -  Transformed Density Rejection
--------------------------------------------

Required:
     T-concave PDF, dPDF

Optional:
     mode

Speed:
     Set-up: slow, Sampling: fast

Reinit:
     supported

Reference:
     [GWa92] [HWa95] [HLD04: Cha.4]



   TDR is an acceptance/rejection method that uses the concavity of a
transformed density to construct hat function and squeezes
automatically. Such PDFs are called T-concave. Currently the following
transformations are implemented and can be selected by setting their
`c'-values by a `unur_tdr_set_c' call:

`c = 0'
     T(x) = log(x)

`c = -0.5'
     T(x) = -1/sqrt(x)      (Default)

   In future releases the transformations T(x) = -(x)^c will be
available for any c with 0 > c > -1.  Notice that if a PDF is T-concave
for a c then it also T-concave for every c'<c. However the performance
decreases when c' is smaller than c. For computational reasons we
suggest the usage of c = -0.5 (this is the default).  For c <= -1 the
hat is not bounded any more if the domain of the PDF is unbounded. But
in the case of a bounded domain using method TABL is preferred to a TDR
with c < -1 (except in a few special cases).

   We offer three variants of the algorithm.

`GW'
     squeezes between construction points

`PS'
     squeezes proportional to hat function       (Default)

`IA'
     same as variant PS but uses a compositon method with "immediate
     acceptance" in the region below the squeeze.

   `GW' has a slightly faster setup but higher marginal generation
times.  `PS' is faster than `GW'. `IA' uses less uniform random numbers
and is therefore faster than `PS'.

   It is also possible to evaluate the inverse of the CDF of the hat
distribution directly using the `unur_tdr_eval_invcdfhat' call.

   There are lots of parameters for these methods, see below.

   It is possible to use this method for correlation induction by
setting an auxiliary uniform random number generator via the
`unur_set_urng_aux' call. (Notice that this must be done after a
possible `unur_set_urng' call.)  When an auxiliary generator is used
then the number of uniform random numbers from the first URNG that are
used for one generated random variate is constant and given in the
following table:

`GW ... 2'

`PS ... 2'

`IA ... 1'

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not. It can be switched on by calling
`unur_tdr_set_verify' and `unur_tdr_chg_verify', respectively.  Notice
however that sampling is (much) slower then.

   For densities with modes not close to 0 it is suggested to set
either the mode or the center of the distribution by the
`unur_distr_cont_set_mode' or `unur_distr_cont_set_center' call.  The
latter is the approximate location of the mode or the mean of the
distribution. This location provides some information about the main
part of the PDF and is used to avoid numerical problems.

   It is possible to use this method for generating from truncated
distributions. It even can be changed for an existing generator object
by an `unur_tdr_chg_truncated' call.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

   _Important:_ The ratio between the area below the hat and the area
below the squeeze changes when the sampling region is restricted.
Especially it becomes (very) small when sampling from the (far) tail of
the distribution. Then it is better to create a new generator object
for the tail of the distribution only.

Function reference
------------------

 -- Function: UNUR_PAR* unur_tdr_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_tdr_set_c (UNUR_PAR* PARAMETERS, double C)
     Set parameter C for transformation T.  Currently only values
     between 0 and -0.5 are allowed.  If `c' is between 0 and -0.5 it
     is set to -0.5.

     Default is `-0.5'.

 -- Function: int unur_tdr_set_variant_gw (UNUR_PAR* PARAMETERS)
     Use original version with squeezes between construction points as
     proposed by Gilks & Wild  (1992).

 -- Function: int unur_tdr_set_variant_ps (UNUR_PAR* PARAMETERS)
     Use squeezes proportional to the hat function. This is faster than
     the original version.  This is the default.

 -- Function: int unur_tdr_set_variant_ia (UNUR_PAR* PARAMETERS)
     Use squeezes proportional to the hat function together with a
     composition method that required less uniform random numbers.

 -- Function: int unur_tdr_set_usedars (UNUR_PAR* PARAMETERS, int
          USEDARS)
     If USEDARS is set to `TRUE', "derandomized adaptive rejection
     sampling" (DARS) is used in setup.  Intervals where the area
     between hat and squeeze is too large compared to the average area
     between hat and squeeze over all intervals are split.  This
     procedure is repeated until the ratio between area below squeeze
     and area below hat exceeds the bound given by
     `unur_tdr_set_max_sqhratio' call or the maximum number of
     intervals is reached. Moreover, it also aborts when no more
     intervals can be found for splitting.

     For finding splitting points the following rules are used (in this
     order, i.e., is if the first rule cannot be applied, the next one
     is used):
       1. Use the expected value of adaptive rejection sampling.

       2. Use the arc-mean rule (a mixture of arithmetic mean and
          harmonic mean).

       3. Use the arithmetic mean of the interval boundaries.
          Notice, however, that for unbounded intervals neither rule 1
     nor rule 3 can be used.

     As an additional feature, it is possible to choose amoung these
     rules.  If USEDARS is set to `1' or `TRUE' the expected point
     (rule 1) is used (it switches to rule 2 for a particular interval
     if rule 1 cannot be applied).  If it is set to `2' the arc-mean
     rule is used.  If it is set to `3' the mean is used.  Notice that
     rule 3 can only be used if the domain of the distribution is
     bounded. It is faster than the other two methods but for
     heavy-tailed distribution and large domain the hat converges
     extremely slowly.

     The default depends on the given construction points.  If the user
     has provided such points via a `unur_tdr_set_cpoints' call, then
     USEDARS is set to `FALSE' by default, i.e., there is no further
     splitting.  If the user has only given the number of construction
     points (or only uses the default number), then USEDARS is set to
     `TRUE' (i.e., use rule 1).

 -- Function: int unur_tdr_set_darsfactor (UNUR_PAR* PARAMETERS, double
          FACTOR)
     Set factor for "derandomized adaptive rejection sampling".  This
     factor is used to determine the intervals that are "too large",
     that is, all intervals where the area between squeeze and hat is
     larger than FACTOR times the average area over all intervals
     between squeeze and hat.  Notice that all intervals are split when
     FACTOR is set to `0.', and that there is no splitting at all when
     FACTOR is set to `UNUR_INFINITY'.

     Default is `0.99'. There is no need to change this parameter.

 -- Function: int unur_tdr_set_cpoints (UNUR_PAR* PARAMETERS, int
          N_STP, const DOUBLE* STP)
     Set construction points for the hat function. If STP is `NULL'
     than a heuristic rule of thumb is used to get N_STP construction
     points. This is the default behavior.

     The default number of construction points is 30.

 -- Function: int unur_tdr_set_reinit_percentiles (UNUR_PAR*
          PARAMETERS, int N_PERCENTILES, const DOUBLE* PERCENTILES)
 -- Function: int unur_tdr_chg_reinit_percentiles (UNUR_GEN* GENERATOR,
          int N_PERCENTILES, const DOUBLE* PERCENTILES)
     By default, when the GENERATOR object is reinitialized, it used
     the same construction points as for the initialization procedure.
     Often the underlying distribution object has been changed only
     moderately. For example, the full conditional distribution of a
     multivariate distribution.  In this case it might be more
     appropriate to use percentilesm of the hat function for the last
     (unchanged) distribution. PERCENTILES must then be a pointer to an
     ordered array of numbers between `0.01' and `0.99'.  If
     PERCENTILES is `NULL', then a heuristic rule of thumb is used to
     get N_PERCENTILES values for these percentiles.  Notice that
     N_PERCENTILES must be at least `2', otherwise defaults are used.
     (Then the first and third quartiles are used by default.)

 -- Function: int unur_tdr_set_reinit_ncpoints (UNUR_PAR* PARAMETERS,
          int NCPOINTS)
 -- Function: int unur_tdr_chg_reinit_ncpoints (UNUR_GEN* GENERATOR,
          int NCPOINTS)
     When reinit fails with the given construction points or the
     percentiles of the old hat function, another trial is undertaken
     with NCPOINTS construction points. NCPOINTS must be at least `10'.

     Default: `50'

 -- Function: int unur_tdr_chg_truncated (UNUR_GEN* GEN, double LEFT,
          double RIGHT)
     Change the borders of the domain of the (truncated) distribution.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call. The hat function will not be changed and
     there is no need to run `unur_reinit'.  _Important:_ The ratio
     between the area below the hat and the area below the squeeze
     changes when the sampling region is restricted. In particular it
     becomes (very) large when sampling from the (far) tail of the
     distribution. Then it is better to create a generator object for
     the tail of distribution only.

     _Important:_ This call does not work for variant `IA' (immediate
     acceptance). In this case UNU.RAN switches _automatically_ to
     variant `PS'.

     _Important:_ It is not a good idea to use adaptave rejection
     sampling while sampling from a domain that is a strict subset of
     the domain that has been used to construct the hat.  For that
     reason adaptive adding of construction points is _automatically
     disabled_ by this call.

     _Important:_ If the CDF of the hat is (almost) the same for LEFT
     and RIGHT and (almost) equal to `0' or `1', then the truncated
     domain is not changed and the call returns an error code.

 -- Function: int unur_tdr_set_max_sqhratio (UNUR_PAR* PARAMETERS,
          double MAX_RATIO)
     Set upper bound for the ratio (area below squeeze) / (area below
     hat).  It must be a number between 0 and 1.  When the ratio
     exceeds the given number no further construction points are
     inserted via adaptive rejection sampling.  Use 0 if no
     construction points should be added after the setup.  Use 1 if
     added new construction points should not be stopped until the
     maximum number of construction points is reached.

     Default is `0.99'.

 -- Function: double unur_tdr_get_sqhratio (const UNUR_GEN* GENERATOR)
     Get the current ratio (area below squeeze) / (area below hat) for
     the generator.  (In case of an error `UNUR_INFINITY' is returned.)

 -- Function: double unur_tdr_get_hatarea (const UNUR_GEN* GENERATOR)
     Get the area below the hat for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: double unur_tdr_get_squeezearea (const UNUR_GEN*
          GENERATOR)
     Get the area below the squeeze for the generator.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: int unur_tdr_set_max_intervals (UNUR_PAR* PARAMETERS, int
          MAX_IVS)
     Set maximum number of intervals.  No construction points are added
     after the setup when the number of intervals suceeds MAX_IVS.  It
     is increased automatically to twice the number of construction
     points if this is larger.

     Default is `100'.

 -- Function: int unur_tdr_set_usecenter (UNUR_PAR* PARAMETERS, int
          USECENTER)
     Use the center as construction point. Default is `TRUE'.

 -- Function: int unur_tdr_set_usemode (UNUR_PAR* PARAMETERS, int
          USEMODE)
     Use the (exact!) mode as construction point.  Notice that the
     behavior of the algorithm is different to simply adding the mode
     in the list of construction points via a `unur_tdr_set_cpoints'
     call. In the latter case the mode is treated just like any other
     point. However, when `usemode' is `TRUE', the tangent in the mode
     is always set to 0. Then the hat of the transformed density can
     never cut the x-axis which must never happen if c < 0, since
     otherwise the hat would not be bounded.

     Default is `TRUE'.

 -- Function: int unur_tdr_set_guidefactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set factor for relative size of the guide table for indexed search
     (see also method DGT *note DGT::). It must be greater than or equal
     to `0'.  When set to `0', then sequential search is used.

     Default is 2.

 -- Function: int unur_tdr_set_verify (UNUR_PAR* PARAMETERS, int VERIFY)
 -- Function: int unur_tdr_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_tdr_set_pedantic (UNUR_PAR* PARAMETERS, int
          PEDANTIC)
     Sometimes it might happen that `unur_init' has been executed
     successfully. But when additional construction points are added by
     adaptive rejection sampling, the algorithm detects that the PDF is
     not T-concave.

     With PEDANTIC being `TRUE', the sampling routine is exchanged by a
     routine that simply returns `UNUR_INFINITY'. Otherwise the new
     point is not added to the list of construction points. At least
     the hat function remains T-concave.

     Setting PEDANTIC to `FALSE' allows sampling from a distribution
     which is "almost" T-concave and small errors are tolerated.
     However it might happen that the hat function cannot be improved
     significantly. When the hat functions that has been constructed by
     the `unur_init' call is extremely large then it might happen that
     the generation times are extremely high (even hours are possible
     in extremely rare cases).

     Default is `FALSE'.

 -- Function: double unur_tdr_eval_invcdfhat (const UNUR_GEN*
          GENERATOR, double U, double* HX, double* FX, double* SQX)
     Evaluate the inverse of the CDF of the hat distribution at U.  As
     a side effect the values of the hat, the density, and the squeeze
     at the computed point x are stored in HX, FX, and SQX,
     respectively. However, these computations are suppressed if the
     corresponding variable is set to `NULL'.

     If U is out of the domain [0,1] then `unur_errno' is set to
     `UNUR_ERR_DOMAIN' and the respective bound of the domain of the
     distribution are returned (which is `-UNUR_INFINITY' or
     `UNUR_INFINITY' in the case of unbounded domains).

     _Important:_ This call does not work for variant `IA' (immediate
     acceptance). In this case the hat CDF is evaluated as if variant
     `PS' is used.

     _Notice_: This function always evaluates the inverse CDF of the
     hat distribution. A call to `unur_tdr_chg_truncated' call has no
     effect.


File: unuran.info,  Node: UTDR,  Prev: TDR,  Up: Methods_for_CONT

5.3.17 UTDR  -  Universal Transformed Density Rejection
-------------------------------------------------------

Required:
     T-concave PDF, mode, approximate area

Speed:
     Set-up: moderate, Sampling: Moderate

Reinit:
     supported

Reference:
     [HWa95] [HLD04: Sect.4.5.4; Alg.4.4]



   UTDR is based on the transformed density rejection and uses three
almost optimal points for constructing hat and squeezes.  It works for
all T-concave distributions with T(x) = -1/sqrt(x).

   It requires the PDF and the (exact) location of the mode.  Notice
that if no mode is given at all, a (slow) numerical mode finder will be
used.  Moreover the approximate area below the given PDF is used.  (If
no area is given for the distribution the algorithm assumes that it is
approximately 1.)  The rejection constant is bounded from above by 4
for all T-concave distributions.

How To Use
..........

UTDR works for any continuous univariate distribution object with given
T-concave PDF (with T(x) = -1/sqrt(x),) mode and approximate area below
PDF.

   When the PDF does not change at the mode for varying parameters, then
this value can be set with `unur_utdr_set_pdfatmode' to avoid some
computations. Since this value will not be updated any more when the
parameters of the distribution are changed, the
`unur_utdr_chg_pdfatmode' call is necessary to do this manually.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that derived parameters like the mode must also be (re-) set if
the parameters or the domain has be changed.  Moreover, if the PDF at
the mode has been provided by a `unur_utdr_set_pdfatmode' call,
additionally `unur_utdr_chg_pdfatmode' must be used (otherwise this
call is not necessary since then this figure is computed directly from
the PDF).

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not. It can be switched on by calling
`unur_utdr_set_verify' and `unur_utdr_chg_verify', respectively.
Notice however that sampling is slower then.

Function reference
------------------

 -- Function: UNUR_PAR* unur_utdr_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_utdr_set_pdfatmode (UNUR_PAR* PARAMETERS, double
          FMODE)
     Set pdf at mode.  When set, the PDF at the mode is never changed.
     This is to avoid additional computations, when the PDF does not
     change when parameters of the distributions vary.  It is only
     useful when the PDF at the mode does not change with changing
     parameters for the distribution.

     Default: not set.

 -- Function: int unur_utdr_set_cpfactor (UNUR_PAR* PARAMETERS, double
          CP_FACTOR)
     Set factor for position of left and right construction point.  The
     CP_FACTOR is used to find almost optimal construction points for
     the hat function.  There is no need to change this factor in
     almost all situations.

     Default is `0.664'.

 -- Function: int unur_utdr_set_deltafactor (UNUR_PAR* PARAMETERS,
          double DELTA)
     Set factor for replacing tangents by secants.  higher factors
     increase the rejection constant but reduces the risk of serious
     round-off errors.  There is no need to change this factor it
     almost all situations.

     Default is `1.e-5'.

 -- Function: int unur_utdr_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_utdr_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_utdr_chg_pdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change PDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.


File: unuran.info,  Node: Methods_for_CEMP,  Next: Methods_for_CVEC,  Prev: Methods_for_CONT,  Up: Methods

5.4 Methods for continuous empirical univariate distributions
=============================================================

* Menu:

* EMPK:: EMPirical distribution with Kernel smoothing
* EMPL:: EMPirical distribution with Linear interpolation
* HIST:: HISTogramm of empirical distribution

Overview of methods
-------------------

Methods for continuous empirical univariate distributions
sample with `unur_sample_cont'

EMPK:  Requires an observed sample.
EMPL:  Requires an observed sample.

Example
-------

     /* ------------------------------------------------------------- */
     /* File: example_emp.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from an empirial continuous univariate  */
     /* distribution.                                                 */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;
       double x;

       /* data points                                                 */
       double data[15] = { -0.1,  0.05, -0.5,   0.08,  0.13,\
     		      -0.21,-0.44, -0.43, -0.33, -0.3, \
     		       0.18, 0.2,  -0.37, -0.29, -0.9 };

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create a distribution object and set empirical sample.      */
       distr = unur_distr_cemp_new();
       unur_distr_cemp_set_data(distr, data, 15);

       /* Choose a method: EMPK.                                      */
       par = unur_empk_new(distr);

       /* Set smooting factor.                                        */
       unur_empk_set_smoothing(par, 0.8);

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Example (String API)
--------------------

     /* ------------------------------------------------------------- */
     /* File: example_emp_str.c                                       */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from an empirial continuous univariate  */
     /* distribution.                                                 */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;
       double x;

       /* Declare UNURAN generator object.                            */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create the generator object.                                */
       gen = unur_str2gen("distr = cemp; \
                              data=(-0.10, 0.05,-0.50, 0.08, 0.13,   \
                                    -0.21,-0.44,-0.43,-0.33,-0.30,   \
                                     0.18, 0.20,-0.37,-0.29,-0.90) & \
                           method=empk; smoothing=0.8");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: EMPK,  Next: EMPL,  Up: Methods_for_CEMP

5.4.1 EMPK  -  EMPirical distribution with Kernel smoothing
-----------------------------------------------------------

Required:
     observed sample

Speed:
     Set-up: slow (as sample is sorted), Sampling: fast (depends on
     kernel)

Reinit:
     not implemented

Reference:
     [HLa00] [HLD04: Sect.12.1.2]



   EMPK generates random variates from an empirical distribution that is
given by an observed sample. The idea is that simply choosing a random
point from the sample and to return it with some added noise results in
a method that has very nice properties, as it can be seen as sampling
from a kernel density estimate. If the underlying distribution is
continuous, especially the fine structur of the resulting empirical
distribution is much better than using only resampling without noise.

   Clearly we have to decide about the density of the noise (called
kernel) and about the standard deviation of the noise.  The
mathematical theory of kernel density estimation shows us that we are
comparatively free in choosing the kernel. It also supplies us with a
simple formula to compute the optimal standarddeviation of the noise,
called bandwidth (or window width) of the kernel.

   The variance of the estimated density is slightly larger than that
of the observed sample. However, this can be easily corrected if
required.

   There is also a correction (mirroring technique) for distributions
with non-negative support.

   A simple robust reference method is implemented to find a good
standard deviation of the noise (i.e. the bandwidth of kernel density
estimation). For some cases (e.g. densities with two or more sharp
distinct peaks) there kernel density estimation can be adjusted by
changing the smoothness factor and the so called beta factor.

How To Use
..........

EMPK uses empirical distributions. The main parameter is the choice if
of kernel density. The most important kernels can be set by
`unur_empk_set_kernel'.  Additionally generators for other kernels can
be used by using `unur_empk_set_kernelgen' instead.  Additionally
variance correction and a correction for non-negative variates can be
switched on.

   The two other parameters (smoothing factor and beta factor) are only
useful for people knowing the theory of kernel density estimation. It
is not necessary to change them if the true underlying distribution is
somehow comparable with a bell-shaped curve, even skewed or with some
not too sharp extra peaks.  In all these cases the simple robust
reference method implemented to find a good standard deviation of the
noise (i.e. the bandwidth of kernel density estimation) should give
sensible results.  However, it might be necessary to overwrite this
automatic method to find the bandwidth eg. when resampling from data
with two or more sharp distinct peaks. Then the distribution has nearly
discrete components as well and our automatic method may easily choose
too large a bandwidth which results in an empirical distribution which
is oversmoothed (i.e. it has lower peaks than the original
distribution). Then it is recommended to decrease the bandwidth using
the `unur_empk_set_smoothing' call. A smoothing factor of `1' is the
default. A smoothing factor of `0' leads to naive resampling of the
data. Thus an appropriate value between these extremes should be
choosen. We recommend to consult a reference on kernel smoothing when
doing so; but it is not a simple problem to determine an optimal
bandwidth for distributions with sharp peaks.

   In general, for most applications it is perfectly ok to use the
default values offered. Unless you have some knowledge on density
estimation we do not recommend to change anything.  There are two
exceptions:

  A. In the case that the unknown underlying distribution is not
     continuous but discrete you should "turn off" the adding of the
     noise by setting:
          unur_empk_set_smoothing(par, 0.)

  B. In the case that you are especially interested in a fast sampling
     algorithm use the call
          unur_empk_set_kernel(par, UNUR_DISTR_BOXCAR);
     to change the used noise distribution from the default Gaussian
     distribution to the uniform distribution.

Function reference
------------------

 -- Function: UNUR_PAR* unur_empk_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_empk_set_kernel (UNUR_PAR* PARAMETERS, unsigned
          KERNEL)
     Select one of the supported kernel distributions. Currently the
     following kernels are supported:

    `UNUR_DISTR_GAUSSIAN'
          Gaussian (normal) kernel

    `UNUR_DISTR_EPANECHNIKOV'
          Epanechnikov kernel

    `UNUR_DISTR_BOXCAR'
          Boxcar (uniform, rectangular) kernel

    `UNUR_DISTR_STUDENT'
          t3 kernel (Student's distribution with 3 degrees of freedom)

    `UNUR_DISTR_LOGISTIC'
          logistic kernel

     For other kernels (including kernels with Student's distribution
     with other than 3 degrees of freedom) use the
     `unur_empk_set_kernelgen' call.

     It is not possible to call `unur_empk_set_kernel' twice.

     Default is the Gaussian kernel.

 -- Function: int unur_empk_set_kernelgen (UNUR_PAR* PARAMETERS, const
          UNUR_GEN* KERNELGEN, double ALPHA, double KERNELVAR)
     Set generator for the kernel used for density estimation.

     ALPHA is used to compute the optimal bandwidth from the point of
     view of minimizing the mean integrated square error (MISE).  It
     depends on the kernel K and is given by
          alpha(K) = Var(K)^(-2/5){ \int K(t)^2 dt}^(1/5)
     For standard kernels (see above) alpha is computed by the
     algorithm.

     KERNVAR is the variance of the used kernel. It is only required
     for the variance corrected version of density estimation (which is
     used by default); otherwise it is ignored.  If KERNELVAR is
     nonpositive, variance correction is disabled.  For standard
     kernels (see above) KERNVAR is computed by the algorithm.

     It is not possible to call `unur_empk_set_kernelgen' after a
     standard kernel has been selected by a `unur_empk_set_kernel' call.

     Notice that the uniform random number generator of the kernel
     generator is overwritten during the `unur_init' call and at each
     `unur_chg_urng' call with the uniform generator used for the
     empirical distribution.

     Default is the Gaussian kernel.

 -- Function: int unur_empk_set_beta (UNUR_PAR* PARAMETERS, double BETA)
     BETA is used to compute the optimal bandwidth from the point of
     view of minimizing the mean integrated square error (MISE).  BETA
     depends on the (unknown) distribution of the sampled data points.
     By default Gaussian distribution is assumed for the sample (BETA =
     1.3637439). There is no requirement to change BETA.

     Default: `1.3637439'

 -- Function: int unur_empk_set_smoothing (UNUR_PAR* PARAMETERS, double
          SMOOTHING)
 -- Function: int unur_empk_chg_smoothing (UNUR_GEN* GENERATOR, double
          SMOOTHING)
     Set and change the smoothing factor.  The smoothing factor
     controlles how "smooth" the resulting density estimation will be.
     A smoothing factor equal to `0' results in naive resampling. A
     very large smoothing factor (together with the variance
     correction) results in a density which is approximately equal to
     the kernel.  Default is 1 which results in a smoothing parameter
     minimising the MISE (mean integrated squared error) if the data
     are not too far away from normal. If a large smoothing factor is
     used, then variance correction must be switched on.

     Default: `1'

 -- Function: int unur_empk_set_varcor (UNUR_PAR* PARAMETERS, int
          VARCOR)
 -- Function: int unur_empk_chg_varcor (UNUR_GEN* GENERATOR, int VARCOR)
     Switch variance correction in generator on/off.  If VARCOR is
     `TRUE' then the variance of the used density estimation is the
     same as the sample variance. However this increases the MISE of
     the estimation a little bit.

     Default is `FALSE'.

 -- Function: int unur_empk_set_positive (UNUR_PAR* PARAMETERS, int
          POSITIVE)
     If POSITIVE is `TRUE' then only nonnegative random variates are
     generated. This is done by means of a mirroring technique.

     Default is `FALSE'.


File: unuran.info,  Node: EMPL,  Next: HIST,  Prev: EMPK,  Up: Methods_for_CEMP

5.4.2 EMPL  -  EMPirical distribution with Linear interpolation
---------------------------------------------------------------

Required:
     observed sample

Speed:
     Set-up: slow (as sample is sorted), Sampling: very fast (inversion)

Reinit:
     not implemented

Reference:
     [HLa00] [HLD04: Sect.12.1.3]



   EMPL generates random variates from an empirical distribution that
is given by an observed sample. This is done by linear interpolation of
the empirical CDF. Although this method is suggested in the books of
Law and Kelton (2000) and Bratly, Fox, and Schrage (1987) we do not
recommend this method at all since it has many theoretical drawbacks:
The variance of empirical distribution function does not coincide with
the variance of the given sample. Moreover, when the sample increases
the empirical density function does not converge to the density of the
underlying random variate. Notice that the range of the generated point
set is always given by the range of the given sample.

   This method is provided in UNU.RAN for the sake of completeness. We
always recommend to use method EMPK (*note EMPirical distribution with
Kernel smoothing: EMPK.).

   If the data seem to be far away from having a bell shaped histogram,
then we think that naive resampling is still better than linear
interpolation.

How To Use
..........

EMPL creates and samples from an empiral distribution by linear
interpolation of the empirical CDF. There are no parameters to set.

_Important_: We do not recommend to use this method! Use method EMPK
(*note EMPirical distribution with Kernel smoothing: EMPK.)  instead.

Function reference
------------------

 -- Function: UNUR_PAR* unur_empl_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.


File: unuran.info,  Node: HIST,  Prev: EMPL,  Up: Methods_for_CEMP

5.4.3 HIST  -  HISTogramm of empirical distribution
---------------------------------------------------

Required:
     histogram

Speed:
     Set-up: moderate, Sampling: fast

Reinit:
     not implemented


   Method HIST generates random variates from an empirical distribution
that is given as histogram. Sampling is done using the inversion method.

   If observed (raw) data are provided we recommend method EMPK (*note
EMPirical distribution with Kernel smoothing: EMPK.)  instead of
compting a histogram as this reduces information.

How To Use
..........

Method HIST uses empirical distributions that are given as a histgram.
There are no optional parameters.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hist_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.


File: unuran.info,  Node: Methods_for_CVEC,  Next: MCMC_Methods_for_CVEC,  Prev: Methods_for_CEMP,  Up: Methods

5.5 Methods for continuous multivariate distributions
=====================================================

* Menu:

* MVSTD:: MultiVariate continuous STandarD distributions
* MVTDR:: Multi-Variate Transformed Density Rejection
* NORTA:: NORmal To Anything
* VNROU:: Multivariate Naive Ratio-Of-Uniforms method

Overview of methods
-------------------

Methods for continuous multivariate distributions
sample with `unur_sample_vec'

NORTA: Requires rank correlation matrix and marginal distributions.
VNROU: Requires the PDF.
MVSTD: Generator for built-in standard distributions.
MVTDR: Requires PDF and gradiant of PDF.


File: unuran.info,  Node: MVSTD,  Next: MVTDR,  Up: Methods_for_CVEC

5.5.1 MVSTD  -  MultiVariate continuous STandarD distributions
--------------------------------------------------------------

Required:
     standard distribution from UNU.RAN library (*note Standard
     distributions: Stddist.).

Speed:
     depends on distribution and generator

Reinit:
     supported


   MVSTD is a wrapper for special generators for multivariate
continuous standard distributions. It only works for distributions in
the UNU.RAN library of standard distributions (*note Standard
distributions: Stddist.).  If a distribution object is provided that is
build from scratch, or if no special generator for the given standard
distribution is provided, the `NULL' pointer is returned.

How To Use
..........

Create a distribution object for a standard distribution from the
UNU.RAN library (*note Standard distributions: Stddist.).

   Sampling from truncated distributions (which can be constructed by
changing the default domain of a distribution by means of
`unur_distr_cvec_set_domain_rect' call) is not possible.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_mvstd_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for new generator. It requires a
     distribution object for a multivariate continuous distribution
     from the UNU.RAN library of standard distributions (*note Standard
     distributions: Stddist.).  Using a truncated distribution is not
     possible.


File: unuran.info,  Node: MVTDR,  Next: NORTA,  Prev: MVSTD,  Up: Methods_for_CVEC

5.5.2 MVTDR  -  Multi-Variate Transformed Density Rejection
-----------------------------------------------------------

Required:
     log-concave (log)PDF, gradient of (log)PDF

Optional:
     mode

Speed:
     Set-up: slow, Sampling: depends on dimension

Reinit:
     not implemented

Reference:
     [HLD04: Sect.11.3.4; Alg.11.15.]  [LJa98]



   MVTDR a multivariate version of the Transformed Density Rection
(*note TDR::) that works for log-concave densities.  For this method
the domain of the distribution is partitioned into cones with the mode
(or the center) of the distribution as their (common) vertex. The hat
function is then constructed as tangent planes of the transformed
density in each of these cones. The respective construction points lie
on the central lines in the cones through the vertex. The point is
chosen such that the hat is minimal among all such points (see the given
references for more details).

   The cones are created by starting with the orthants of the reals
space. These are then iteratively split when the volume below the hat
in such cones is too large. Thus an increasing number of cones results
in a better fitting hat function.  Notice however, that the required
number of cones increases exponentially with the number of dimension.
Moreover, due to the construction the rejection does not converge to 1
and remains strictly larger than 1.

   For distributions with bounded domains the cones are cut to pyramids
that cover the domain.

How To Use
..........

Create a multivariate generator object that contains the PDF and its
gradient. This object also should contain the mode of the distribution
(or a point nearby should be provided as center of the distribution).

   The method has three parameter to adjust the method for the given
distribution:

`stepsmin'
     Minimal number of iterations for splitting cones.  Notice that we
     start with 2^dim initial cones and that we arrive at
     2^(dim+stepsmin) cones after these splits. So this number must be
     set with care. It can be set by a `unur_mvtdr_set_stepsmin' call.

`boundsplitting'
     Cones where the volume below the hat is relatively large (i.e.
     larger than the average volume over all cones times
     `boundsplitting' are further split.  This parameter can set via a
     `unur_mvtdr_set_boundsplitting' call.

`maxcones'
     The maximum number of generated cones. When this number is
     reached, the initialization routine is stopped. Notice that the
     rejection constant can be still prohibitive large.  This parameter
     can set via a `unur_mvtdr_set_maxcones' call.


   Setting of these parameter can be quite tricky. The default settings
lead to hat functions where the volume below the hat is similar in each
cone. However, there might be some problems with distributions with
higher correlations, since then too few cones are created. Then it
might be necessary to increase the values for `stepsmin' and `maxcones'
and to set `boundsplitting' to `0'.

   The number of cones and the total volume below the hat can be
controlled using the respective calls `unur_mvtdr_get_ncones' and
`unur_mvtdr_get_hatvol'.  Notice, that the rejection constant is
bounded from below by some figure (larger than 1) that depends on the
dimension.

   Unfortunately, the algorithm cannot detect the quality of the
constructed hat.

Function reference
------------------

 -- Function: UNUR_PAR* unur_mvtdr_new (const UNUR_DISTR* DISTRIBUTION)
     Get parameters for generator.

 -- Function: int unur_mvtdr_set_stepsmin (UNUR_PAR* PARAMETERS, int
          STEPSMIN)
     Set minimum number of triangulation step for each starting cone.
     STEPSMIN must be nonnegative.

     Default: `5'.

 -- Function: int unur_mvtdr_set_boundsplitting (UNUR_PAR* PARAMETERS,
          double BOUNDSPLITTING)
     Set bound for splitting cones. All cones are split which have a
     volume below the hat that is greater than BOUND_SPLITTING times
     the average over all volumes. However, the number given by the
     `unur_mvtdr_set_maxcones' is not exceeded.  Notice that the later
     number is always reached if BOUND_SPLITTING is less than 1.

     Default: `1.5'

 -- Function: int unur_mvtdr_set_maxcones (UNUR_PAR* PARAMETERS, int
          MAXCONES)
     Set maximum number of cones.

     Notice that this number is always increased to 2^(dim+stepsmin)
     where dim is the dimension of the distribution object and stepsmin
     the given mimimum number of triangulation steps.

     Notice: For higher dimensions and/or higher correlations between
     the coordinates of the random vector the required number of cones
     can be very high. A too small maximum number of cones can lead to
     a very high rejection constant.

     Default: `10000'.

 -- Function: int unur_mvtdr_get_ncones (const UNUR_GEN* GENERATOR)
     Get the number of cones used for the hat function of the GENERATOR.
     (In case of an error `0' is returned.)

 -- Function: double unur_mvtdr_get_hatvol (const UNUR_GEN* GENERATOR)
     Get the volume below the hat for the GENERATOR.  (In case of an
     error `UNUR_INFINITY' is returned.)

 -- Function: int unur_mvtdr_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_mvtdr_chg_verify (UNUR_GEN* GENERATOR, int
          VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PDF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.


File: unuran.info,  Node: NORTA,  Next: VNROU,  Prev: MVTDR,  Up: Methods_for_CVEC

5.5.3 NORTA  -  NORmal To Anything
----------------------------------

Required:
     rank correlation matrix, marginal distributions

Speed:
     Set-up: slow, Sampling: depends on dimension

Reinit:
     not implemented

Reference:
     [HLD04: Sect.12.5.2; Alg.12.11.]



   NORTA (NORmal to anything) is a model to get random vectors with
given marginal distributions and rank correlation.

   *Important:* Notice that marginal distribution and (rank)
correlation structure do not uniquely define a multivariate
distribution. Thus there are many other (more or less sensible) models.

   In the NORTA model multinormal random variates with the given
(Spearman's) rank correlations are generated.  In a second step the
(standard normal distributed) marginal variates are transformed by
means of the CDF of the normal distribution to get uniform marginals.
The resulting random vectors have uniform marginals and the desired
rank correlation between its components.  Such a random vector is
called 'copula'.

   By means of the inverse CDF the uniform marginals are then
transformed into the target marginal distributions. This transformation
does not change the rank correlation.

   For the generation of the multinormal distribution the (Spearman's)
rank correlation matrix is transformed into the corresponding (Pearson)
correlation matrix. Samples from the resulting multinormal distribution
are generated by means of the Cholesky decomposition of the covariance
matrix.

   It can happen that the desired rank correlation matrix is not
feasible, i.e., it cannot occur as rank correlation matrix of a
multinormal distribution. The resulting "covariance" matrix is not
positive definite. In this case an eigenvector correction method is
used. Then all non-positive eigenvalues are set to a small positive
value and hence the rank correlation matrix of the generated random
vectors is "close" to the desired matrix.

How To Use
..........

Create a multivariate generator object and set marginal distributions
using `unur_distr_cvec_set_marginals',
`unur_distr_cvec_set_marginal_array' , or
`unur_distr_cvec_set_marginal_list'.  (Do not use the corresponding
calls for the standard marginal distributions).

   When the domain of the multivariate distribution is set by of a
`unur_distr_cvec_set_domain_rect' call then the domain of each of the
marginal distributions is truncated by the respective coordinates of
the given rectangle.

   If copulae are required (i.e. multivariate distributions with
uniform marginals) such a generator object can be created by means of
`unur_distr_copula' .

   There are no optional parameters for this method.

Function reference
------------------

 -- Function: UNUR_PAR* unur_norta_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.


File: unuran.info,  Node: VNROU,  Prev: NORTA,  Up: Methods_for_CVEC

5.5.4 VNROU  -  Multivariate Naive Ratio-Of-Uniforms method
-----------------------------------------------------------

Required:
     PDF

Optional:
     mode, center, bounding rectangle for acceptance region

Speed:
     Set-up: fast or slow, Sampling: slow

Reinit:
     supported

Reference:
     [WGS91]



   VNROU is an implementation of the multivariate ratio-of-uniforms
method which uses a (minimal) bounding hyper-rectangle, see also *note
Ratio-of-Uniforms::.  It uses an additional parameter r that can be
used for adjusting the algorithm to the given distribution to improve
performance and/or to make this method applicable.  Larger values of r
increase the class of distributions for which the method works at the
expense of higher rejection constants. Moreover, this implementation
uses the center mu of the distribution (which is set to the mode or
mean by default, see `unur_distr_cvec_get_center' for details of its
default values).

   The minimal bounding has then the coordinates

     v^+ = sup_(x) (f(x))^(1/r d+1),
     u^-_i = inf_(x_i) (x_i- mu_i) (f(x))^(r/r d+1),
     u^+_i = sup_(x_i) (x_i- mu_i) (f(x))^(r/r d+1),

where x_i is the i-th coordinate of point x; mu_i is the i-th
coordinate of the center mu.  d denotes the dimension of the
distribution.  These bounds can either be given directly, or are
computed automatically by means of an numerical routine by Hooke and
Jeeves [HJa61] called direct search (see `src/utils/hooke.c' for
further references and details). Of course this algorithm can fail,
especially when this rectangle is not bounded.

   It is important to note that the algorithm works with PDF(x-center)
instead of PDF(x), i.e. the bounding rectangle has to be provided for
PDF(x-center).  This is important as otherwise the acceptance region
can become a very long and skinny ellipsoid along a diagonal of the
(huge) bounding rectangle.

   VNROU is based on the rejection method (*note Rejection::), and it
is important to note that the acceptance probability decreases
exponentially with dimension. Thus even for moderately many dimensions
(e.g. 5) the number of repetitions to get one random vector can be
prohibitively large and the algorithm seems to stay in an infinite loop.

How To Use
..........

For using the VNROU method UNU.RAN needs the PDF of the distribution.
Additionally, the parameter r can be set via a `unur_vnrou_set_r' call.
Notice that the acceptance probability decreases when r is increased.
On the other hand is is more unlikely that the bounding rectangle does
not exist if r is small.

   A bounding rectangle can be given by the `unur_vnrou_set_u' and
`unur_vnrou_set_v' calls.

   _Important:_ The bounding rectangle has to be provided for the
function PDF(x-center)!  Notice that `center' is the center of the given
distribution, see `unur_distr_cvec_set_center'.  If in doubt or if this
value is not optimal, it can be changed (overridden) by a
`unur_distr_cvec_set_center' call.

   If the coordinates of the bounding rectangle are not provided by the
user then the minimal bounding rectangle is computed automatically.

   By means of `unur_vnrou_set_verify' and `unur_vnrou_chg_verify' one
can run the sampling algorithm in a checking mode, i.e., in every cycle
of the rejection loop it is checked whether the used rectangle indeed
enclosed the acceptance region of the distribution. When in doubt
(e.g., when it is not clear whether the numerical routine has worked
correctly) this can be used to run a small Monte Carlo study.

   *Important:* The rejection constant (i.e. the expected number of
iterations for generationg one random vector) can be extremely high, in
particular when the dimension is 4 or higher.  Then the algorithm will
perform almost infinite loops.  Thus it is recommended to read the
volume below the hat function by means of the `unur_vnrou_get_volumehat'
call. The returned number divided by the volume below the PDF (which is
1 in case of a normalized PDF) gives the rejection constant.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.
Notice, that the coordinates of a bounding rectangle given by
`unur_vnrou_set_u' and `unur_vnrou_set_v' calls are used also when the
generator is reused. These can be changed by means of `unur_vnrou_chg_u'
and `unur_vnrou_chg_v' calls.  (If no such coordinates have been given,
then they are computed numerically during the reinitialization
proceedure.)

Function reference
------------------

 -- Function: UNUR_PAR* unur_vnrou_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_vnrou_set_u (UNUR_PAR* PARAMETERS, double* UMIN,
          double* UMAX)
     Sets left and right boundaries of bounding hyper-rectangle.  If no
     values are given, the boundary of the minimal bounding
     hyper-rectangle is computed numerically.

     *Important*: The boundaries are those of the density shifted by
     the center of the distribution, i.e., for the function
     PDF(x-center)!

     _Notice_: Computing the minimal bounding rectangle may fail under
     some circumstances. Moreover, for multimodal distributions the
     bounds might be too small as only local extrema are computed.
     Nevertheless, for log-concave distributions it should work.

     Default: not set (i.e. computed automatically)

 -- Function: int unur_vnrou_chg_u (UNUR_GEN* GENERATOR, double* UMIN,
          double* UMAX)
     Change left and right boundaries of bounding hyper-rectangle.

 -- Function: int unur_vnrou_set_v (UNUR_PAR* PARAMETERS, double VMAX)
     Set upper boundary for bounding hyper-rectangle.  If no values are
     given, the density at the mode is evaluated.  If no mode is given
     for the distribution it is computed numerically (and might fail).

     Default: not set (i.e. computed automatically)

 -- Function: int unur_vnrou_chg_v (UNUR_GEN* GENERATOR, double VMAX)
     Change upper boundary for bounding hyper-rectangle.

 -- Function: int unur_vnrou_set_r (UNUR_PAR* PARAMETERS, double R)
     Sets the parameter R of the generalized multivariate
     ratio-of-uniforms method.

     _Notice_: This parameter must satisfy R>0.

     Default: `1'.

 -- Function: int unur_vnrou_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
     Turn verifying of algorithm while sampling on/off.

     If the condition PDF(x) <= hat(x) is violated for some x then
     `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However notice
     that this might happen due to round-off errors for a few values of
     x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_vnrou_chg_verify (UNUR_GEN* GENERATOR, int
          VERIFY)
     Change the verifying of algorithm while sampling on/off.

 -- Function: double unur_vnrou_get_volumehat (const UNUR_GEN*
          GENERATOR)
     Get the volume of below the hat.  For normalized densities, i.e.
     when the volume below PDF is 1, this value equals the rejection
     constant for the vnrou method.

     In case of an error UNUR_INFINITY is returned.


File: unuran.info,  Node: MCMC_Methods_for_CVEC,  Next: Methods_for_CVEMP,  Prev: Methods_for_CVEC,  Up: Methods

5.6 Markov chain samplers for continuous multivariate distributions
===================================================================

* Menu:

* GIBBS:: Markov Chain - GIBBS sampler
* HITRO:: Markov Chain - HIT-and-run sampler with Ratio-Of-uniforms

   Markov chain samplers generate sequences of random vectors which have
the target distribution as stationary distribution.  There generated
vectors are (more or less) correlated and it might take a long time
until the sequence has converged to the given target distribution.

   *Beware: MCMC sampling can be dangerous!*

Overview of methods
-------------------

Markov Chain Methods for continuous multivariate distributions
sample with `unur_sample_vec'

GIBBS: T-concave logPDF and derivatives of logPDF.
HITRO: Requires PDF.


File: unuran.info,  Node: GIBBS,  Next: HITRO,  Up: MCMC_Methods_for_CVEC

5.6.1 GIBBS  -  Markov Chain - GIBBS sampler
--------------------------------------------

Required:
     T-concave logPDF, derivatives of logPDF

Speed:
     Set-up: fast, Sampling: moderate

Reinit:
     not implemented

Reference:
     [HLD04: Sect.14.1.2]



   Method GIBBS implements a Gibbs sampler for a multivariate
distribution with given joint density and its gradient.  When running
such a Markov chain all coordinates are updated cyclically using full
conditional distributions. After each step the state of the chain is
returned (i.e., a random point is returned whenever a single coordinate
has been updated).  It is also possible to return only points after all
coordinates have been updated by "thinning" the chain.  Moreover, to
reduce autocorrelation this thinning factor can be any integer. Notice,
however, that the sampling time for a chain of given length is
increased by the same factor, too.

   GIBBS also provides a variant of the Gibbs sampler where in each
step a point from the full conditional distribution along some random
direction is sampled. This direction is chosen uniformly from the
sphere in each step.  This method is also known as Hit-and-Run
algorithm for non-uniform distributions.

   Our experiences shows that the original Gibbs sampler with sampling
along coordinate axes is superior to random direction sampling as long
as the correlations between the components of the random vector are not
too high.

   For both variants transformed density rejection (see methods *note
TDR:: and *note ARS::) is used to sample from the full conditional
distributions. In opposition to the univariate case, it is important
that the factor `c' is as large as possible. I.e., for a log-concave
density `c' must be set to `0.', since otherwise numerical underflow
might stop the algorithm.

   _Important:_ GIBBS does not generate independent random points. The
starting point of the Gibbs chain must be in a "typical" region of the
target distribution. If such a point is not known or would be too
expensive, then the first part of the chain should be discarded
(burn-in of the chain).

How To Use
..........

For using the GIBBS method UNU.RAN needs the logarithm of the PDF of
the multivariate joint distribution and its gradient or partial
derivatives.

   It provides two variants:
_coordinate direction sampling (Gibbs sampling) [default]_
     The coordinates are updated cyclically.  It requires the partial
     derivatives of the (logarithm of the) PDF of the target
     distribution, see `unur_distr_cvec_set_pdlogpdf'.  Otherwise, the
     gradient of the logPDF (see `unur_distr_cvec_set_dlogpdf' ) is
     used, which is more expensive.

     This variant can be selected using
     `unur_gibbs_set_variant_coordinate'.

_random direction sampling (nonuniform Hit-and-Run algorithm)_
     In each step is a direction is sampled uniformly from the sphere
     and the next point in the chain is sampled from the full
     conditional distribution along this direction.

     It requires the gradient of the logPDF and thus each step is more
     expensive than each step for coordinate direction sampling.

     This variant can be selected using
     `unur_gibbs_set_variant_random_direction'.

   It is important that the `c' parameter for the TDR method is as
large as possible. For logconcave distribution it must be set to `0',
since otherwise numerical underflow can cause the algorithm to stop.

   The starting point of the Gibbs chain must be "typical" for the
target distribution. If such a point is not known or would be too
expensive, then the first part of the chain should be discarded
(burn-in of the chain). When using the `unur_gibbs_set_burnin' call
this is done during the setup of the Gibbs sampler object.

   In case of a fatal error in the generator for conditional
distributions the methods generates points that contain UNUR_INFINITY.

   *Warning:* The algorithm requires that all full conditionals for the
given distribution object are T-concave. However, this property is not
checked.  If this property is not satisfied, then generation from the
conditional distributions becomes (very) slow and might fail or (even
worse) produces random vectors from an incorrect distribution.  When
using `unur_gibbs_set_burnin' then the setup already might fail. Thus
when in doubt whether GIBBS can be used for the targent distribution it
is a good idea to use a burn-in for checking.

   _Remark:_ It might happen (very rarely) that the chain becomes stuck
due to numerical errors. (This is in particular the case when the given
PDF does not fulfill the condition of this method.)  When this happens
during burn-in then the setup is aborted (i.e. it fails). Otherwise the
chain restarts again from its starting point.

   *Warning:* Be carefull with debugging flags. If it contains flag
`0x01000000u' it produces a lot of output for each step in the
algorithm.  (This flag is switched of in the default debugging flags).

Function reference
------------------

 -- Function: UNUR_PAR* unur_gibbs_new (const UNUR_DISTR* DISTRIBUTION)
     ...........................................................................

 -- Function: int unur_gibbs_set_variant_coordinate (UNUR_PAR*
          PARAMETERS)
     Coordinate Direction Sampling: Sampling along the coordinate
     directions (cyclic).

     This is the default.

 -- Function: int unur_gibbs_set_variant_random_direction (UNUR_PAR*
          PARAMETERS)
     Random Direction Sampling: Sampling along the random directions.

 -- Function: int unur_gibbs_set_c (UNUR_PAR* PARAMETERS, double C)
     Set parameter C for transformation T of the transformed density
     rejection method.  Currently only values between `0' and `-0.5' are
     allowed. If `c' is between `0' and `-0.5' it is set to `-0.5'.

     For C `=0' (for logconcave densities) method ARS (*note ARS::) is
     used which is very robust against badly normalized PDFs. For other
     values method TDR (*note TDR::) is used.

     The value for C should be as large as possible to avoid fatal
     numerical underflows. Thus for log-concave distributions C must be
     set to `0.'

     Default is `0'.

 -- Function: int unur_gibbs_set_startingpoint (UNUR_PAR* PARAMETERS,
          const DOUBLE* X0)
     Sets the starting point of the Gibbs sampler. X0 must be a
     "typical" point of the given distribution.  If such a "typical"
     point is not known and a starting point is merely guessed, the
     first part of the Gibbs chain should be discarded (_burn-in_),
     e.g.\ by mean of the `unur_gibbs_set_burnin' call.

     Default is the result of `unur_distr_cvec_get_center' for the
     given distribution object.

 -- Function: int unur_gibbs_set_thinning (UNUR_PAR* PARAMETERS, int
          THINNING)
     Sets the THINNING parameter. When THINNING is set to k then every
     k-th point from the iteration is returned by the sampling
     algorithm.

     _Notice_: This parameter must satisfy THINNING>=1.

     Default: `1'.

 -- Function: int unur_gibbs_set_burnin (UNUR_PAR* PARAMETERS, int
          BURNIN)
     If a "typical" point for the target distribution is not known but
     merely guessed, the first part of the Gibbs chain should be
     discarded (_burn-in_). This can be done during the initialization
     of the generator object.  The length of the burn-in can is then
     BURNIN.

     When method GIBBS is not applicable for the target distribution
     then the initialization already might fail during the burn-in.
     Thus this reduces the risk of running a generator that returns
     UNUR_INFINITY cased by some fatal error during sampling.

     The thinning factor set by a `unur_gibbs_set_thinning' call has no
     effect on the length of the burn-in, i.e., for the burn-in always
     a thinning factor `1' is used.

     _Notice_: This parameter must satisfy THINNING>=0.

     Default: `0'.

 -- Function: const double* unur_gibbs_get_state (UNUR_GEN* GENERATOR)
 -- Function: int unur_gibbs_chg_state (UNUR_GEN* GENERATOR, const
          DOUBLE* STATE)
     Get and change the current state of the Gibbs chain.

 -- Function: int unur_gibbs_reset_state (UNUR_GEN* GENERATOR)
     Reset state of chain to starting point.

     _Notice:_ Currently this function does not reset the generators
     for conditional distributions. Thus it is not possible to get the
     same Gibbs chain even when the underlying uniform random number
     generator is reset.


File: unuran.info,  Node: HITRO,  Prev: GIBBS,  Up: MCMC_Methods_for_CVEC

5.6.2 HITRO  -  Markov Chain - HIT-and-run sampler with Ratio-Of-uniforms
-------------------------------------------------------------------------

Required:
     PDF

Optional:
     mode, center, bounding rectangle for acceptance region

Speed:
     Set-up: fast, Sampling: fast

Reinit:
     not implemented

Reference:
     [KLPa05]



   HITRO is an implementation of a hit-and-run sampler that runs on the
acceptance region of the multivariate ratio-of-uniforms method, see
*note Ratio-of-Uniforms::.

   The Ratio-of-Uniforms transforms the region below the density into
some region that we call "region of acceptance" in the following. The
minimal bounding hyperrectangle of this region is given by

     v^+ = sup_(x) (f(x))^(1/r d+1),
     u^-_i = inf_(x_i) (x_i- mu_i) (f(x))^(r/r d+1),
     u^+_i = sup_(x_i) (x_i- mu_i) (f(x))^(r/r d+1),

where d denotes the dimension of the distribution; x_i is the i-th
coordinate of point x; mu_i is the i-th coordinate of the center mu of
the distribution, i.e., a point in the "main region" of the
distribution.  Using the center is important, since otherwise the
acceptance region can become a very long and skinny ellipsoid along a
diagonal of the (huge) bounding rectangle.

   For each step of the Hit-and-Run algorithm we have to choose some
direction. This direction together with the current point of the chain
determines a straight line. Then a point is sampled uniformly on
intersection of this line and the region of acceptance. This is done by
rejection from a uniform distribution on a line segment that covers it.
Depending of the chosen variant the endpoints of this covering line are
computed either by means of a (not necessary minimal) bounding
hyper-rectangle, or just the "covering plate" of the bounding
hyper-rectangle.

   The required bounds of the hyper-rectable can be given directly by
the user. Otherwise, these are computed automatically by means of a
numerical routine by Hooke and Jeeves [HJa61] called direct search (see
`src/utils/hooke.c' for further references and details).  However, this
expensive computation can be avoided by determine these bounds "on the
fly" by the following adaptive algorithm: Start with some (small)
hyper-rectangle and enlarge it whenever the endpoints of the covering
line segment are not contained in the acceptance region of the
Ratio-of-Unfiorms method.  This approach works reliable as long as the
region of acceptance is convex.

   The performance of the uniform sampling from the line segment is
much improved if the covering line is adjusted (shortened) whenever a
point is rejected (adaptive sampling). This technique reduces the
expected number of iterations enormously.

   Method HITRO requires that the region of acceptance of the
Ratio-of-Uniforms method is bounded. The shape of this region can be
controlled by a parameter r. Higher values of r result in larger
classes of distributions with bounded region of acceptance. (A
distribution that has such a bounded region for some r also has a
bounded region for every r' greater than r.) On the other hand the
acceptance probability decreases with increasing r. Moreover, round-off
errors are more likely and (for large values of r) might result in a
chain with a stationary distribution different from the target
distribution.

   Method HITRO works optimal for distributions whose region of
acceptance is convex. This is in particular the case for all
log-concave distributions when we set r = `1'.  For bounded but
non-convex regions of acceptance convergence is yet not guarenteed by
mathematical theory.

How To Use
..........

Method HITRO requires the PDF of the target distribution (derivatives
are not necessary).

   The acceptance region of the Ratio-of-Uniforms transformation must
be bounded. Its shape is controlled by parameter r.  By default this
parameter is set to `1' as this guarentees a convex region of
acceptance when the PDF of the given distribution is log-concave. It
should only be set to a different (higher!) value using
`unur_vnrou_set_r' if otherwise x_i (f(x))^(r/r d+1) were not bounded
for each coordinate.

   There are two variants of the HITRO sampler:
_coordinate direction sampling. [default]_
     The coordinates are updated cyclically.  This can be seen as a
     Gibbs sampler running on the acceptance region of the
     Ratio-of-Uniforms method.  This variant can be selected using
     `unur_hitro_set_variant_coordinate'.

_random direction sampling._
     In each step is a direction is sampled uniformly from the sphere.

     This variant can be selected using
     `unur_hitro_set_variant_random_direction'.

   Notice that each iteration of the coordinate direction sampler is
cheaper than an iteration of the random direction sampler.

   Sampling uniformly from the line segment can be adjusted in several
ways:

_Adaptive line sampling vs. simple rejection._
     When adaptive line sampling is switched on, the covering line is
     shortened whenever a point is rejected. However, when the region
     of acceptance is not convex the line segment from which we have to
     sample might not be connected. We found that the algorithm still
     works but at the time being there is no formal proof that the
     generated Markov chain has the required stationary distribution.

     Adaptive line sampling can switch on/off by means of the
     `unur_hitro_set_use_adaptiveline' call.

_Bounding hyper-rectangle vs. "covering plate"._
     For computing the covering line we can use the bounding
     hyper-rectangle or just its upper bound.  The latter saves
     computing time during the setup and when computing the covering
     during at each iteration step at the expense of a longer covering
     line. When adaptive line sampling is used the total generation
     time for the entire chain is shorter when only the "covering
     plate" is used.

     _Notice:_ When coordinate sampling is used the entire bounding
     rectangle is used.

     Using the entire bounding hyper-rectangle can be switched on/off
     by means of the `unur_hitro_set_use_boundingrectangle' call.

_Deterministic vs. adaptive bounding hyper-rectangle._
     A bounding rectangle can be given by the `unur_vnrou_set_u' and
     `unur_vnrou_set_v' calls.  Otherwise, the minimal bounding
     rectangle is computed automatically during the setup by means of a
     numerical algorithm. However, this is (very) slow especially in
     higher dimensions and it might happen that this algorithm (like
     any other numerical algorithm) does not return a correct result.

     Alternatively the bounding rectangle can be computed adaptively.
     In the latter case `unur_vnrou_set_u' and `unur_vnrou_set_v' can
     be used to provide a starting rectangle which must be sufficiently
     small.  Then both endpoints of the covering line segment are always
     check whether they are outside the acceptance region of the
     Ratio-of-Uniforms method. If they are not, then the line segment
     and the ("bounding") rectangle are enlarged using a factor that
     can be given using the `unur_hitro_set_adaptive_multiplier' call.

     Notice, that running this method in the adaptive rectangle mode
     requires that the region of acceptance is convex when random
     directions are used, or the given PDF is unimodal when coordinate
     direction sampling is used.  Moreover, it requires two additional
     calls to the PDF in each iteration step of the chain.

     Using addaptive bounding rectangles can be switched on/off by
     means of the `unur_hitro_set_use_adaptiverectangle' call.


   The algorithm takes of a bounded rectangular domain given by a
`unur_distr_cvec_set_domain_rect' call, i.e. the PDF is set to zero for
every x outside the given domain.  However, it is only the coordinate
direction sampler where the boundary values are directly used to get
the endpoins of the coverline line for the line sampling step.

   _Important:_ The bounding rectangle has to be provided for the
function PDF(x-center)!  Notice that `center' is the center of the given
distribution, see `unur_distr_cvec_set_center'.  If in doubt or if this
value is not optimal, it can be changed (overridden) by a
`unur_distr_cvec_set_center' call.

Function reference
------------------

 -- Function: UNUR_PAR* unur_hitro_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_hitro_set_variant_coordinate (UNUR_PAR*
          PARAMETERS)
     Coordinate Direction Sampling: Sampling along the coordinate
     directions (cyclic).

     _Notice:_ For this variant the entire bounding rectangle is always
     used independent of the `unur_hitro_set_use_boundingrectangle'
     call.

     This is the default.

 -- Function: int unur_hitro_set_variant_random_direction (UNUR_PAR*
          PARAMETERS)
     Random Direction Sampling: Sampling along the random directions.

 -- Function: int unur_hitro_set_use_adaptiveline (UNUR_PAR*
          PARAMETERS, int ADAPTIVE)
     When ADAPTIVE is set to `TRUE' adaptive line sampling is applied,
     otherwise simple rejection is used.

     _Notice:_ When adaptive line sampling is switched off, the entire
     bounding rectangle must be used since otherwise the sampling time
     can be arbitrarily slow.

     _Warning:_ When adaptive line sampling is switched off, sampling
     can be arbitrarily slow. In particular this happens when random
     direction sampling is used for distributions with rectangular
     domains. Then the algorithm can be trapped into a vertex (or even
     edge).

     Default is `TRUE'.

 -- Function: int unur_hitro_set_use_boundingrectangle (UNUR_PAR*
          PARAMETERS, int RECTANGLE)
     When RECTANGLE is set to `TRUE' the entire bounding rectangle is
     used for computing the covering line. Otherwise, only an upper
     bound for the acceptance region is used.

     _Notice:_ When coordinate sampling is used the entire bounding
     rectangle has is always used and this call has no effect.

     Default: `FALSE' for random direction samplig, `TRUE' for
     coordinate direction sampling.

 -- Function: int unur_hitro_set_use_adaptiverectangle (UNUR_PAR*
          PARAMETERS, int ADAPTIVE)
     When ADAPTIVE is set to `FALSE' the bounding rectangle is
     determined during the setup. Either, it is computed automatically
     by a (slow) numerical method, or it must be provided by
     `unur_vnrou_set_u' and `unur_vnrou_set_v' calls.

     If ADAPTIVE is set to `TRUE' the bounding rectangle is computed
     adaptively. In this case the `unur_vnrou_set_u' and
     `unur_vnrou_set_v' calls can be used to provide a starting
     rectangle. This should be sufficiently small.  If not given then
     we assume v_(max) = 1, u_(min)=(-0.001,-0.001,...,-0.001), and
     u_(max)=(0.001,0.001,...,0.001).  Adaptive enlargements of the
     bounding hyperrectangle can be controlled set setting an
     enlargement factor given by a `unur_hitro_set_adaptive_multiplier'
     call.

     Using adaptive computation of the bounding rectangle reduces the
     setup time significantly (when it is not given by the user) at the
     expense of two additional PDF evaluations during each iteration
     step.

     _Important:_ Using adaptive bounding rectangles requires that the
     region of acceptance is convex when random directions are used, or
     a unimodal PDF when coordinate direction sampling is used.

     Default: `FALSE' for random direction samplig, `TRUE' for
     coordinate direction sampling.

 -- Function: int unur_hitro_set_r (UNUR_PAR* PARAMETERS, double R)
     Sets the parameter R of the generalized multivariate
     ratio-of-uniforms method.

     _Notice_: This parameter must satisfy R>0.

     Default: `1'.

 -- Function: int unur_hitro_set_v (UNUR_PAR* PARAMETERS, double VMAX)
     Set upper boundary for bounding hyper-rectangle.  If not set not
     set the mode of the distribution is used.

     If adaptive bounding rectangles the value is used for the starting
     rectangle. If not given (and the mode of the distribution is not
     known) then VMAX=`1e-3' is used.

     If deterministic bounding rectangles these values are the given
     values are used for the rectangle. If no value is given (and the
     mode of the distribution is not known), the upper bound of the
     minimal bounding hyper-rectangle is computed numerically (slow).

     Default: not set.

 -- Function: int unur_hitro_set_u (UNUR_PAR* PARAMETERS, const DOUBLE*
          UMIN, const DOUBLE* UMAX)
     Sets left and right boundaries of bounding hyper-rectangle.

     If adaptive bounding rectangles these values are used for the
     starting rectangle. If not given then UMIN=`{-b,-b,...,-b}' and
     UMAX=`{b,b,...,b}' with `b=1.e-3' is used.

     If deterministic bounding rectangles these values are the given
     values are used for the rectangle. If no values are given, the
     boundary of the minimal bounding hyper-rectangle is computed
     numerically (slow).

     *Important*: The boundaries are those of the density shifted by
     the center of the distribution, i.e., for the function
     PDF(x-center)!

     _Notice_: Computing the minimal bounding rectangle may fail under
     some circumstances. Moreover, for multimodal distributions the
     bounds might be too small as only local extrema are computed.
     Nevertheless, for log-concave distributions it should work.

     Default: not set.

 -- Function: int unur_hitro_set_adaptive_multiplier (UNUR_PAR*
          PARAMETERS, double FACTOR)
     Adaptive enlargements of the bounding hyperrectangle can be
     controlled set setting the enlargement FACTOR.  This must be
     greater than 1. Values close to 1 result in small adaptive steps
     and thus reduce the risk of too large bounding rectangles. On the
     other hand many adaptive steps might be necessary.

     _Notice:_ For practical reasons this call does not accept values
     for FACTOR less than `1.0001'. If this value is UNUR_INFINITY this
     results in infinite loops.

     Default: `1.1'

 -- Function: int unur_hitro_set_startingpoint (UNUR_PAR* PARAMETERS,
          const DOUBLE* X0)
     Sets the starting point of the HITRO sampler in the original
     scale. X0 must be a "typical" point of the given distribution.  If
     such a "typical" point is not known and a starting point is merely
     guessed, the first part of the HITRO chain should be discarded
     (_burn-in_), e.g.\ by mean of the `unur_hitro_set_burnin' call.

     _Important:_ The PDF of the distribution must not vanish at the
     given point X0.

     Default is the result of `unur_distr_cvec_get_center' for the
     given distribution object.

 -- Function: int unur_hitro_set_thinning (UNUR_PAR* PARAMETERS, int
          THINNING)
     Sets the THINNING parameter. When THINNING is set to k then every
     k-th point from the iteration is returned by the sampling
     algorithm.  If thinning has to be set such that each coordinate is
     updated when using coordinate direction sampling, then THINNING
     should be `dim+1' (or any multiple of it) where `dim' is the
     dimension of the distribution object.

     _Notice_: This parameter must satisfy THINNING>=1.

     Default: `1'.

 -- Function: int unur_hitro_set_burnin (UNUR_PAR* PARAMETERS, int
          BURNIN)
     If a "typical" point for the target distribution is not known but
     merely guessed, the first part of the HITRO chain should be
     discarded (_burn-in_). This can be done during the initialization
     of the generator object.  The length of the burn-in can is then
     BURNIN.

     The thinning factor set by a `unur_hitro_set_thinning' call has no
     effect on the length of the burn-in, i.e., for the burn-in always
     a thinning factor `1' is used.

     _Notice_: This parameter must satisfy THINNING>=0.

     Default: `0'.

 -- Function: const double* unur_hitro_get_state (UNUR_GEN* GENERATOR)
 -- Function: int unur_hitro_chg_state (UNUR_GEN* GENERATOR, const
          DOUBLE* STATE)
     Get and change the current state of the HITRO chain.

     _Notice:_ The state variable contains the point in the `dim+1'
     dimensional point in the (tansformed) region of acceptance of the
     Ratio-of-Uniforms method. Its coordinate are stored in the
     following order: `state[] = {v, u1, u2, ..., udim}'.

     If the state can only be changed if the given STATE is inside this
     region.

 -- Function: int unur_hitro_reset_state (UNUR_GEN* GENERATOR)
     Reset state of chain to starting point.

     _Notice:_ Currently this function does not reset the generators
     for conditional distributions. Thus it is not possible to get the
     same HITRO chain even when the underlying uniform random number
     generator is reset.


File: unuran.info,  Node: Methods_for_CVEMP,  Next: Methods_for_DISCR,  Prev: MCMC_Methods_for_CVEC,  Up: Methods

5.7 Methods for continuous empirical multivariate distributions
===============================================================

* Menu:

* VEMPK:: (Vector) EMPirical distribution with Kernel smoothing

Overview of methods
-------------------

Methods for continuous empirical multivariate distributions
sample with `unur_sample_vec'

VEMPK: Requires an observed sample.

Example
-------

     /* ------------------------------------------------------------- */
     /* File: example_vemp.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from an empirial continuous             */
     /* multivariate distribution.                                    */

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;

       /* 4 data points of dimension 2                                */
       double data[] = { 1. ,1.,       /* 1st data point              */
     		    -1.,1.,       /* 2nd data point              */
     		    1.,-1.,       /* 3rd data point              */
     		    -1.,-1. };    /* 4th data point              */

       double result[2];

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Create a distribution object with dimension 2.              */
       distr = unur_distr_cvemp_new( 2 );

       /* Set empirical sample.                                       */
       unur_distr_cvemp_set_data(distr, data, 4);

       /* Choose a method: VEMPK.                                     */
       par = unur_vempk_new(distr);

       /* Use variance correction.                                    */
       unur_vempk_set_varcor( par, 1 );

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         unur_sample_vec(gen, result);
         printf("(%f,%f)\n", result[0], result[1]);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Example (String API)
--------------------

(not implemented)


File: unuran.info,  Node: VEMPK,  Up: Methods_for_CVEMP

5.7.1 VEMPK  -  (Vector) EMPirical distribution with Kernel smoothing
---------------------------------------------------------------------

Required:
     observed sample

Speed:
     Set-up: slow, Sampling: slow (depends on dimension)

Reinit:
     not implemented

Reference:
     [HLa00] [HLD04: Sect.12.2.1]



   VEMPK generates random variates from a multivariate empirical
distribution that is given by an observed sample. The idea is that
simply choosing a random point from the sample and to return it with
some added noise results in a method that has very nice properties, as
it can be seen as sampling from a kernel density estimate.  Clearly we
have to decide about the density of the noise (called kernel) and about
the covariance matrix of the noise.  The mathematical theory of kernel
density estimation shows us that we are comparatively free in choosing
the kernel.  It also supplies us with a simple formula to compute the
optimal standarddeviation of the noise, called bandwidth (or window
width) of the kernel.

   Currently only a Gaussian kernel with the same covariance matrix as
the given sample is implemented.  However it is possible to choose
between a variance corrected version or those with optimal MISE.
Additionally a smoothing factor can be set to adjust the estimated
density to non-bell-shaped data densities.

How To Use
..........

VEMPK uses empirical distributions. The main parameter would be the
choice if of kernel density. However, currently only Gaussian kernels
are supported. The parameters for the density are computed by a simple
but robust method. However, it is possible to control its behavior by
changing the smoothing factor.  Additionally, variance correction can
be swithed on (at the price of suboptimal MISE).

Function reference
------------------

 -- Function: UNUR_PAR* unur_vempk_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_vempk_set_smoothing (UNUR_PAR* PARAMETERS,
          double SMOOTHING)
 -- Function: int unur_vempk_chg_smoothing (UNUR_GEN* GENERATOR, double
          SMOOTHING)
     Set and change the smoothing factor.  The smoothing factor
     controlles how "smooth" the resulting density estimation will be.
     A smoothing factor equal to 0 results in naive resampling. A very
     large smoothing factor (together with the variance correction)
     results in a density which is approximately equal to the kernel.
     Default is 1 which results in a smoothing parameter minimising the
     MISE (mean integrated squared error) if the data are not too far
     away from normal. If a large smoothing factor is used, then
     variance correction must be switched on.

     Default: `1'

 -- Function: int unur_vempk_set_varcor (UNUR_PAR* PARAMETERS, int
          VARCOR)
 -- Function: int unur_vempk_chg_varcor (UNUR_GEN* GENERATOR, int
          VARCOR)
     Switch variance correction in generator on/off.  If VARCOR is
     `TRUE' then the variance of the used density estimation is the
     same as the sample variance. However this increases the MISE of
     the estimation a little bit.

     Default is `FALSE'.


File: unuran.info,  Node: Methods_for_DISCR,  Next: Methods_for_MATR,  Prev: Methods_for_CVEMP,  Up: Methods

5.8 Methods for discrete univariate distributions
=================================================

* Menu:

* DARI:: Discrete Automatic Rejection Inversion
* DAU:: (Discrete) Alias-Urn method
* DEXT:: wrapper for Discrete EXTernal generators
* DGT:: (Discrete) Guide Table method (indexed search)
* DSROU:: Discrete Simple Ratio-Of-Uniforms method
* DSS:: (Discrete) Sequential Search method
* DSTD:: Discrete STandarD distributions

Overview of methods
-------------------

Methods for discrete univariate distributions
sample with `unur_sample_discr'

method   PMF   PV   mode   sum    other
DARI     x          x      ~      T-concave
DAU      [x]   x                  
DGT      [x]   x                  
DSROU    x          x      x      T-concave
DSS      [x]   x           x      
DSTD                              build-in standard distribution
CEXT                              wrapper for external generator

Example
-------

     /* ------------------------------------------------------------- */
     /* File: example_discr.c                                         */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from a discrete univariate distribution.*/

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;
       double param = 0.3;

       double probvec[10] = {1.0, 2.0, 3.0, 4.0, 5.0,\
                             6.0, 7.0, 8.0, 4.0, 3.0};

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr1, *distr2;    /* distribution objects        */
       UNUR_PAR   *par1, *par2;        /* parameter objects           */
       UNUR_GEN   *gen1, *gen2;        /* generator objects           */

       /* First distribution: defined by PMF.                         */
       distr1 = unur_distr_geometric(&param, 1);
       unur_distr_discr_set_mode(distr1, 0);

       /* Choose a method: DARI.                                      */
       par1 = unur_dari_new(distr1);
       gen1 = unur_init(par1);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen1 == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Second distribution: defined by (finite) PV.                */
       distr2 = unur_distr_discr_new();
       unur_distr_discr_set_pv(distr2, probvec, 10);

       /* Choose a method: DGT.                                       */
       par2 = unur_dgt_new(distr2);
       gen2 = unur_init(par2);
       if (gen2 == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* print some random integers                                  */
       for (i=0; i<10; i++){
         printf("number %d: %d\n", i*2,   unur_sample_discr(gen1) );
         printf("number %d: %d\n", i*2+1, unur_sample_discr(gen2) );
       }

       /* Destroy all objects.                                        */
       unur_distr_free(distr1);
       unur_distr_free(distr2);
       unur_free(gen1);
       unur_free(gen2);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Example (String API)
--------------------

     /* ------------------------------------------------------------- */
     /* File: example_discr_str.c                                     */
     /* ------------------------------------------------------------- */
     /* String API.                                                   */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* Example how to sample from a discrete univariate distribution.*/

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;     /* loop variable                                 */

       /* Declare UNURAN generator objects.                           */
       UNUR_GEN   *gen1, *gen2;        /* generator objects           */


       /* First distribution: defined by PMF.                         */
       gen1 = unur_str2gen("geometric(0.3); mode=0 & method=dari");

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen1 == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Second distribution: defined by (finite) PV.                */
       gen2 = unur_str2gen(
                  "distr=discr; pv=(1,2,3,4,5,6,7,8,4,3) & method=dgt");
       if (gen2 == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* print some random integers                                  */
       for (i=0; i<10; i++){
         printf("number %d: %d\n", i*2,   unur_sample_discr(gen1) );
         printf("number %d: %d\n", i*2+1, unur_sample_discr(gen2) );
       }

       /* Destroy all objects.                                        */
       unur_free(gen1);
       unur_free(gen2);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: DARI,  Next: DAU,  Up: Methods_for_DISCR

5.8.1 DARI  -  Discrete Automatic Rejection Inversion
-----------------------------------------------------

Required:
     T-concave PMF, mode, approximate area

Speed:
     Set-up: moderate, Sampling: fast

Reinit:
     supported

Reference:
     [HDa96] [HLD04: Sect.10.2; Alg.10.4]



   DARI is based on rejection inversion, which can be seen as an
adaptation of transformed density rejection to discrete distributions.
The used transformation is -1/sqrt(x) .

   DARI uses three almost optimal points for constructing the
(continuous) hat. Rejection is then done in horizontal direction.
Rejection inversion uses only one uniform random variate per trial.

   DARI has moderate set-up times (the PMF is evaluated nine times),
and good marginal speed, especially if an auxiliary array is used to
store values during generation.

   DARI works for all T_(-1/2) -concave distributions. It requires the
PMF and the location of the mode. Moreover the approximate sum over the
PMF is used. (If no sum is given for the distribution the algorithm
assumes that it is approximately 1.)  The rejection constant is bounded
from above by 4 for all T-concave distributions.

How To Use
..........

DARI works for discrete distribution object with given PMF.  The sum
over probabilities should be approximately one. Otherwise it must be
set by a `unur_distr_discr_set_pmfsum' call to its (approximate) value.

   The size of an auxiliary table can be set by
`unur_dari_set_tablesize'.  The expected number of evaluations can be
reduced by switching the use of squeezes by means of
`unur_dari_set_squeeze'.  It is possible to change the parameters and
the domain of the chosen distribution and run `unur_reinit' to
reinitialize the generator object.  Notice, that derived parameters
like the mode must also be (re-) set if the parameters or the domain
has be changed.

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not. It can be switched on by calling
`unur_dari_set_verify' and `unur_dari_chg_verify', respectively.
Notice however that sampling is (much) slower then.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dari_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_dari_set_squeeze (UNUR_PAR* PARAMETERS, int
          SQUEEZE)
     Turn utilization of the squeeze of the algorithm on/off.  This
     squeeze does not resamble the squeeze of the continuous TDR
     method. It was especially designed for rejection inversion.

     The squeeze is not necessary if the size of the auxiliary table is
     big enough (for the given distribution).  Using a squeeze is
     suggested to speed up the algorithm if the domain of the
     distribution is very big or if only small samples are produced.

     Default: no squeeze.

 -- Function: int unur_dari_set_tablesize (UNUR_PAR* PARAMETERS, int
          SIZE)
     Set the size for the auxiliary table, that stores constants
     computed during generation.  If SIZE is set to `0' no table is
     used.  The speed-up can be impressive if the PMF is expensive to
     evaluate and the "main part of the distribution" is concentrated
     in an interval shorter than the size of the table.

     Default is `100'.

 -- Function: int unur_dari_set_cpfactor (UNUR_PAR* PARAMETERS, double
          CP_FACTOR)
     Set factor for position of the left and right construction point,
     resp.  The CP_FACTOR is used to find almost optimal construction
     points for the hat function.  The CP_FACTOR must be positive and
     should not exceed 2.  There is no need to change this factor in
     almost all situations.

     Default is `0.664'.

 -- Function: int unur_dari_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_dari_chg_verify (UNUR_GEN* GENERATOR, int VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition is violated for some x then `unur_errno' is set to
     `UNUR_ERR_GEN_CONDITION'. However notice that this might happen
     due to round-off errors for a few values of x (less than 1%).

     Default is `FALSE'.


File: unuran.info,  Node: DAU,  Next: DEXT,  Prev: DARI,  Up: Methods_for_DISCR

5.8.2 DAU  -  (Discrete) Alias-Urn method
-----------------------------------------

Required:
     probability vector (PV)

Speed:
     Set-up: slow (linear with the vector-length), Sampling: very fast

Reinit:
     supported

Reference:
     [WAa77] [HLD04: Sect.3.2]



   DAU samples from distributions with arbitrary but finite probability
vectors (PV) of length N.  The algorithmus is based on an ingeneous
method by A.J. Walker and requires a table of size (at least) N.  It
needs one random numbers and only one comparison for each generated
random variate. The setup time for constructing the tables is O(N).

   By default the probability vector is indexed starting at `0'.
However this can be changed in the distribution object by a
`unur_distr_discr_set_domain' call.

   The method also works when no probability vector but a PMF is given.
However then additionally a bounded (not too large) domain must be
given or the sum over the PMF (see `unur_distr_discr_make_pv' for
details).

How To Use
..........

Create an object for a discrete distribution either by setting a
probability vector or a PMF. The performance can be slightly influenced
by setting the size of the used table which can be changed by
`unur_dau_set_urnfactor'.  It is possible to change the parameters and
the domain of the chosen distribution and run `unur_reinit' to
reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dau_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_dau_set_urnfactor (UNUR_PAR* PARAMETERS, double
          FACTOR)
     Set size of urn table relative to length of the probability
     vector. It must not be less than 1. Larger tables result in
     (slightly) faster generation times but require a more expensive
     setup. However sizes larger than 2 are not recommended.

     Default is `1'.


File: unuran.info,  Node: DEXT,  Next: DGT,  Prev: DAU,  Up: Methods_for_DISCR

5.8.3 DEXT  -  wrapper for Discrete EXTernal generators
-------------------------------------------------------

Required:
     routine for sampling discrete random variates

Speed:
     depends on external generator

Reinit:
     supported


   Method DEXT is a wrapper for external generators for discrete
univariate distributions. It allows the usage of external random
variate generators within the UNU.RAN framework.

How To Use
..........

The following steps are required to use some external generator within
the UNU.RAN framework (some of these are optional):

  1. Make an empty generator object using a `unur_dext_new' call.  The
     argument DISTRIBUTION is optional and can be replaced by `NULL'.
     However, it is required if you want to pass parameters of the
     generated distribution to the external generator or for running
     some validation tests provided by UNU.RAN.

  2. Create an initialization routine of type `int (*init)(UNUR_GEN
     *gen)' and plug it into the generator object using the
     `unur_dext_set_init' call. Notice that the INIT routine must
     return `UNUR_SUCCESS' when it has been executed successfully and
     `UNUR_FAILURE' otherwise.  It is possible to get the size of and
     the pointer to the array of parameters of the underlying
     distribution object by the respective calls
     `unur_dext_get_ndistrparams' and `unur_dext_get_distrparams'.
     Parameters for the external generator that are computed in the
     INIT routine can be stored in a single array or structure which is
     available by the `unur_dext_get_params' call.

     Using an INIT routine is optional and can be omitted.

  3. Create a sampling routine of type `int (*sample)(UNUR_GEN *gen)'
     and plug it into the generator object using the
     `unur_dext_set_sample' call.

     Uniform random numbers are provided by the `unur_sample_urng'
     call. Do not use your own implementation of a uniform random
     number generator directly. If you want to use your own random
     number generator we recommend to use the UNU.RAN interface (see
     *note Using uniform random number generators: URNG.).

     The array or structure that contains parameters for the external
     generator that are computed in the INIT routine are available
     using the `unur_dext_get_params' call.

     Using a SAMPLE routine is of course obligatory.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator
object. The INIT routine is then called again.

   Here is a short example that demonstrates the application of this
method by means of the geometric distribution:

     /* ------------------------------------------------------------- */
     /* File: example_dext.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */

     /* This example shows how an external generator for the          */
     /* geometric distribution can be used within the UNURAN          */
     /* framework.                                                    */
     /*                                                               */
     /* Notice, that this example does not provide the simplest       */
     /* solution.                                                     */

     /* ------------------------------------------------------------- */
     /* Initialization routine.                                       */
     /*                                                               */
     /*   Here we simply read the parameter of the geometric          */
     /*   distribution and store it in an array for parameters of     */
     /*   the external generator.                                     */
     /*   [ Of course we could do this in the sampling routine as     */
     /*   and avoid the necessity of this initialization routine. ]   */

     int geometric_init (UNUR_GEN *gen)
     {
       /* Get pointer to parameters of geometric distribution         */
       double *params = unur_dext_get_distrparams(gen);

       /* The parameter is the first entry (see manual)               */
       double p = params[0];

       /* Get array to store this parameter for external generator    */
       double *genpar = unur_dext_get_params(gen, sizeof(double));
       genpar[0] = p;

       /* Executed successfully                                       */
       return UNUR_SUCCESS;
     }

     /* ------------------------------------------------------------- */
     /* Sampling routine.                                             */
     /*                                                               */
     /*   Contains the code for the external generator.               */

     int geometric_sample (UNUR_GEN *gen)
     {
       /* Get scale parameter                                         */
       double *genpar = unur_dext_get_params(gen,0);
       double p = genpar[0];

       /* Sample a uniformly distributed random number                */
       double U = unur_sample_urng(gen);

       /* Transform into geometrically distributed random variate     */
       return ( (int) (log(U) / log(1.-p)) );
     }

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int i;     /* loop variable                                    */
       int K;     /* will hold the random number                      */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Use predefined geometric distribution with parameter 1/10   */
       double fpar[1] = { 0.1 };
       distr = unur_distr_geometric(fpar, 1);

       /* Use method DEXT                                             */
       par = unur_dext_new(distr);

       /* Set initialization and sampling routines.                   */
       unur_dext_set_init(par, geometric_init);
       unur_dext_set_sample(par, geometric_sample);

       /* Create the generator object.                                */
       gen = unur_init(par);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* It is possible to reuse the distribution object to create   */
       /* another generator object. If you do not need it any more,   */
       /* it should be destroyed to free memory.                      */
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the standard Gaussian distribution.                         */
       /* Eg.:                                                        */
       for (i=0; i<10; i++) {
         K = unur_sample_discr(gen);
         printf("%d\n",K);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Function reference
------------------

 -- Function: UNUR_PAR* unur_dext_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for new generator.

 -- Function: int unur_dext_set_init (UNUR_PAR* PARAMETERS, int (*
          INIT)(UNUR_GEN* gen ))
     Set initialization routine for external generator. Inside the

     _Important:_ The routine INIT must return `UNUR_SUCCESS' when the
     generator was initialized successfully and `UNUR_FAILURE'
     otherwise.

     Parameters that are computed in the INIT routine can be stored in
     an array or structure that is avaiable by means of the
     `unur_dext_get_params' call. Parameters of the underlying
     distribution object can be obtained by the
     `unur_dext_get_distrparams' call.

 -- Function: int unur_dext_set_sample (UNUR_PAR* PARAMETERS, int (*
          SAMPLE)(UNUR_GEN* gen ))
     Set sampling routine for external generator.

     _Important:_ Use `unur_sample_urng(gen)' to get a uniform random
     number.  The pointer to the array or structure that contains the
     parameters that are precomputed in the INIT routine are available
     by `unur_dext_get_params(gen,0)'.  Additionally one can use the
     `unur_dext_get_distrparams' call.

 -- Function: void* unur_dext_get_params (UNUR_GEN* GENERATOR, size_t
          SIZE)
     Get pointer to memory block for storing parameters of external
     generator. A memory block of size SIZE is automatically (re-)
     allocated if necessary and the pointer to this block is stored in
     the GENERATOR object. If one only needs the pointer to this memory
     block set SIZE to `0'.

     Notice, that SIZE is the size of the memory block and not the
     length of an array.

     _Important:_ This rountine should only be used in the
     initialization and sampling routine of the external generator.

 -- Function: double* unur_dext_get_distrparams (UNUR_GEN* GENERATOR)
 -- Function: int unur_dext_get_ndistrparams (UNUR_GEN* GENERATOR)
     Get size of and pointer to array of parameters of underlying
     distribution in GENERATOR object.

     _Important:_ These rountines should only be used in the
     initialization and sampling routine of the external generator.


File: unuran.info,  Node: DGT,  Next: DSROU,  Prev: DEXT,  Up: Methods_for_DISCR

5.8.4 DGT  -  (Discrete) Guide Table method (indexed search)
------------------------------------------------------------

Required:
     probability vector (PV)

Speed:
     Set-up: slow (linear with the vector-length), Sampling: very fast

Reinit:
     supported

Reference:
     [CAa74] [HLD04: Sect.3.1.2]



   DGT samples from arbitrary but finite probability vectors. Random
numbers are generated by the inversion method, i.e.,

  1. Generate a random number U ~ U(0,1).

  2. Find smallest integer I such that F(I) = P(X<=I) >= U.

   Step (2) is the crucial step. Using sequential search requires
O(E(X)) comparisons, where E(X) is the expectation of the distribution.
Indexed search, however, uses a guide table to jump to some I' <= I
near I to find X in constant time. Indeed the expected number of
comparisons is reduced to 2, when the guide table has the same size as
the probability vector (this is the default). For larger guide tables
this number becomes smaller (but is always larger than 1), for smaller
tables it becomes larger. For the limit case of table size 1 the
algorithm simply does sequential search (but uses a more expensive
setup then method DSS (*note DSS::). On the other hand the setup time
for guide table is O(N), where N denotes the length of the probability
vector (for size 1 no preprocessing is required). Moreover, for very
large guide tables memory effects might even reduce the speed of the
algorithm. So we do not recommend to use guide tables that are more
than three times larger than the given probability vector. If only a
few random numbers have to be generated, (much) smaller table sizes are
better.  The size of the guide table relative to the length of the given
probability vector can be set by a `unur_dgt_set_guidefactor' call.

   There exist two variants for the setup step which can be set by a
`unur_dgt_set_variant' call: Variants 1 and 2.  Variant 2 is faster but
more sensitive to roundoff errors when the guide table is large. By
default variant 2 is used for short probability vectors (N<1000) and
variant 1 otherwise.

   By default the probability vector is indexed starting at `0'.
However this can be changed in the distribution object by a
`unur_distr_discr_set_domain' call.

   The method also works when no probability vector but a PMF is given.
However, then additionally a bounded (not too large) domain must be
given or the sum over the PMF. In the latter case the domain of the
distribution is trucated (see `unur_distr_discr_make_pv' for details).

How To Use
..........

Create an object for a discrete distribution either by setting a
probability vector or a PMF. The performance can be slightly influenced
by setting the size of the used table which can be changed by
`unur_dgt_set_guidefactor'.  It is possible to change the parameters
and the domain of the chosen distribution and run `unur_reinit' to
reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dgt_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_dgt_set_guidefactor (UNUR_PAR* PARAMETERS,
          double FACTOR)
     Set size of guide table relative to length of PV.  Larger guide
     tables result in faster generation time but require a more
     expensive setup. Sizes larger than 3 are not recommended.  If the
     relative size is set to 0, sequential search is used.  However,
     this is not recommended, except in exceptional cases, since method
     DSS (*note DSS::) is has almost no setup and is thus faster (but
     requires the sum over the PV as input parameter).

     Default is `1'.

 -- Function: int unur_dgt_set_variant (UNUR_PAR* PARAMETERS, unsigned
          VARIANT)
     Set variant for setup step. Possible values are `1' or `2'.
     Variant `2' is faster but more sensitive to roundoff errors when
     the guide table is large.  By default variant `2' is used for
     short probability vectors (N<1000) and variant `1' otherwise.


File: unuran.info,  Node: DSROU,  Next: DSS,  Prev: DGT,  Up: Methods_for_DISCR

5.8.5 DSROU  -  Discrete Simple Ratio-Of-Uniforms method
--------------------------------------------------------

Required:
     T-concave PMF, mode, sum over PMF

Speed:
     Set-up: fast, Sampling: slow

Reinit:
     supported

Reference:
     [LJa01] [HLD04: Sect.10.3.2; Alg.10.6]



   DSROU is based on the ratio-of-uniforms method (*note
Ratio-of-Uniforms::) but uses universal inequalities for constructing a
(universal) bounding rectangle.  It works for all T-concave
distributions with T(x) = -1/sqrt(x) .

   The method requires the PMF, the (exact) location of the mode and
the sum over the given PDF. The rejection constant is 4 for all
T-concave distributions. Optionally the CDF at the mode can be given to
increase the performance of the algorithm. Then the rejection constant
is reduced to 2.

How To Use
..........

The method works for T-concave discrete distributions with given PMF.
The sum over of the PMF or an upper bound of this sum must be known.

   Optionally the CDF at the mode can be given to increase the
performance using `unur_dsrou_set_cdfatmode'.  However, this *must not*
be called if the sum over the PMF is replaced by an upper bound.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

   If any of mode, CDF at mode, or the sum over the PMF has been
changed, then `unur_reinit' must be executed.  (Otherwise the generator
produces garbage).

   There exists a test mode that verifies whether the conditions for
the method are satisfied or not while sampling. It can be switched on
or off by calling `unur_dsrou_set_verify' and `unur_dsrou_chg_verify',
respectively.  Notice however that sampling is (a little bit) slower
then.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dsrou_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_dsrou_set_cdfatmode (UNUR_PAR* PARAMETERS,
          double FMODE)
     Set CDF at mode.  When set, the performance of the algorithm is
     increased by factor 2.  However, when the parameters of the
     distribution are changed `unur_dsrou_chg_cdfatmode' has to be used
     to update this value.  Notice that the algorithm detects a mode at
     the left boundary of the domain automatically and it is not
     necessary to use this call for a monotonically decreasing PMF.

     Default: not set.

 -- Function: int unur_dsrou_set_verify (UNUR_PAR* PARAMETERS, int
          VERIFY)
 -- Function: int unur_dsrou_chg_verify (UNUR_GEN* GENERATOR, int
          VERIFY)
     Turn verifying of algorithm while sampling on/off.  If the
     condition squeeze(x) <= PMF(x) <= hat(x) is violated for some x
     then `unur_errno' is set to `UNUR_ERR_GEN_CONDITION'. However
     notice that this might happen due to round-off errors for a few
     values of x (less than 1%).

     Default is `FALSE'.

 -- Function: int unur_dsrou_chg_cdfatmode (UNUR_GEN* GENERATOR, double
          FMODE)
     Change CDF at mode of distribution.  `unur_reinit' must be
     executed before sampling from the generator again.


File: unuran.info,  Node: DSS,  Next: DSTD,  Prev: DSROU,  Up: Methods_for_DISCR

5.8.6 DSS  -  (Discrete) Sequential Search method
-------------------------------------------------

Required:
     probability vector (PV) and sum over PV; or probability mass
     function(PMF), sum over PV and domain; or or cumulative
     distribution function (CDF)

Speed:
     Set-up: fast, Sampling: very slow (linear in expectation)

Reinit:
     supported

Reference:
     [HLD04: Sect.3.1.1; Alg.3.1]



   DSS samples from arbitrary discrete distributions.  Random numbers
are generated by the inversion method, i.e.,

  1. Generate a random number U ~ U(0,1).

  2. Find smallest integer I such that F(I) = P(X<=I) >= U.

   Step (2) is the crucial step. Using sequential search requires
O(E(X)) comparisons, where E(X) is the expectation of the distribution.
Thus this method is only recommended when only a few random variates
from the given distribution are required.  Otherwise, table methods
like DGT (*note DGT::) or DAU (*note DAU::) are much faster. These
methods also need not the sum over the PMF (or PV) as input. On the
other hand, however, these methods always compute a table.

   DSS runs with the PV, the PMF, or the CDF of the distribution.  It
uses actually uses the first one in this list (in this ordering) that
could be found.

How To Use
..........

It works with a discrete distribution object with contains at least the
PV, the PMF, or the CDF.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dss_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.


File: unuran.info,  Node: DSTD,  Prev: DSS,  Up: Methods_for_DISCR

5.8.7 DSTD  -  Discrete STandarD distributions
----------------------------------------------

Required:
     standard distribution from UNU.RAN library (*note Standard
     distributions: Stddist.) or discrete distribution with inverse CDF.

Speed:
     Set-up: fast, Sampling: depends on distribution and generator

Reinit:
     supported


   DSTD is a wrapper for special generators for discrete univariate
standard distributions. It only works for distributions in the UNU.RAN
library of standard distributions (*note Standard distributions:
Stddist.)  or for discrete distributions where the inverse CDF is given.
If a distribution object is provided that is build from scratch, it
must provide the inverse CDF. Then CSTD implements the inversion
method. Otherwise, the `NULL' pointer is returned.

   For some distributions more than one special generator is possible.

How To Use
..........

Create a distribution object for a standard distribution from the
UNU.RAN library (*note Standard distributions: Stddist.), or create a
discrete distribution object and set the function for the inverse CDF
using `unur_distr_discr_set_invcdf'.  For some distributions more than
one special generator (_variants_) is possible. These can be choosen by
a `unur_dstd_set_variant' call. For possible variants *Note Standard
distributions: Stddist.  However the following are common to all
distributions:

`UNUR_STDGEN_DEFAULT'
     the default generator.

`UNUR_STDGEN_FAST'
     the fastest available special generator.

`UNUR_STDGEN_INVERSION'
     the inversion method (if available).

   Notice that the variant `UNUR_STDGEN_FAST' for a special generator
might be slower than one of the universal algorithms!  Additional
variants may exist for particular distributions.

   Sampling from truncated distributions (which can be constructed by
changing the default domain of a distribution by means of
`unur_distr_discr_set_domain' or unur_dstd_chg_truncated calls) is
possible but requires the inversion method. Moreover the CDF of the
distribution must be implemented.

   It is possible to change the parameters and the domain of the chosen
distribution and run `unur_reinit' to reinitialize the generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_dstd_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for new generator. It requires a
     distribution object for a discrete univariant distribution from the
     UNU.RAN library of standard distributions (*note Standard
     distributions: Stddist.).

     Using a truncated distribution is allowed only if the inversion
     method is available and selected by the `unur_dstd_set_variant'
     call immediately after creating the parameter object.  Use a
     `unur_distr_discr_set_domain' call to get a truncated distribution.

 -- Function: int unur_dstd_set_variant (UNUR_PAR* PARAMETERS, unsigned
          VARIANT)
     Set variant (special generator) for sampling from a given
     distribution.  For possible variants *note Standard distributions:
     Stddist.

     Common variants are `UNUR_STDGEN_DEFAULT' for the default
     generator, `UNUR_STDGEN_FAST' for (one of the) fastest implemented
     special generators, and `UNUR_STDGEN_INVERSION' for the inversion
     method (if available).  If the selected variant number is not
     implemented, then an error code is returned and the variant is not
     changed.

 -- Function: int unur_dstd_chg_truncated (UNUR_GEN* GENERATOR, int
          LEFT, int RIGHT)
     Change left and right border of the domain of the (truncated)
     distribution.  This is only possible if the inversion method is
     used.  Otherwise this call has no effect and an error code is
     returned.

     Notice that the given truncated domain must be a subset of the
     domain of the given distribution. The generator always uses the
     intersection of the domain of the distribution and the truncated
     domain given by this call.

     It is not required to run `unur_reinit' after this call has been
     used.

     _Important:_ If the CDF is (almost) the same for LEFT and RIGHT
     and (almost) equal to `0' or `1', then the truncated domain is not
     chanced and the call returns an error code.

     _Notice:_ If the parameters of the distribution has been changed
     it is recommended to set the truncated domain again, since the
     former call might change the domain of the distribution but not
     update the values for the boundaries of the truncated distribution.


File: unuran.info,  Node: Methods_for_MATR,  Next: Methods_for_UNID,  Prev: Methods_for_DISCR,  Up: Methods

5.9 Methods for random matrices
===============================

* Menu:

* MCORR:: Random CORRelation matrix

Overview of methods
-------------------

Methods for matrix distributions
sample with `unur_sample_matr'

MCORR: Distribution object for random correlation matrix.


File: unuran.info,  Node: MCORR,  Up: Methods_for_MATR

5.9.1 MCORR  -  Random CORRelation matrix
-----------------------------------------

Required:
     Distribution object for random correlation matrix

Speed:
     Set-up: fast, Sampling: depends on dimension

Reinit:
     supported

Reference:
     [DLa86: Sect.6.1; p.605] [MOa84]



   MCORR generates a random correlation matrix (Pearson's correlation).
Two methods are used:

  1. When a random correlation matrix having given eigenvalues is
     sought, the method of Marsaglia and Olkin [MOa84] is used.  In
     this case, the correlation matrix R is given as R=PDP' where D is
     a diagonal matrix containing the eigenvalues and P is a random
     orthonormal matrix. In higher dimensions, the rounding-errors
     introduced in the previous matrix multiplications could lead to a
     non-symmetric correlation matrix. Therefore the symmetric
     correlation matrix is computed as R=(PDP'+P'DP)/2 .

  2. A matrix H is generated where all rows are independent random
     vectors of unit length uniformly on a sphere.  Then HH' is a
     correlation matrix (and vice versa if HH' is a correlation matrix
     then the rows of H are random vectors on a sphere).


   Notice that due to round-off errors the generated matrices might not
be positive definite in extremely rare cases (especially when the given
eigenvalues are amost 0).

   There are many other possibilites (distributions) of sampling the
random rows from a sphere. The chosen methods are simple but does not
result in a uniform distriubution of the random correlation matrices.

   It only works with distribution objects of random correlation
matrices (*note Random Correlation Matrix: correlation.).

How To Use
..........

Create a distibution object for random correlation matrices by a
`unur_distr_correlation' call (*note Random Correlation Matrix:
correlation.).

   When a correlation matrix with given eigenvalues should be
generated, these eigenvalues can be set by a
`unur_mcorr_set_eigenvalues' call.

   Otherwise, a faster algorithm is used that generates correlation
matrices with random eigenstructure.

   Notice that due to round-off errors, there is a (small) chance that
the resulting matrix is not positive definite for a Cholesky
decomposition algorithm, especially when the dimension of the
distribution is high.

   It is possible to change the given eigenvalues using
`unur_mcorr_chg_eigenvalues' and run `unur_reinit' to reinitialize the
generator object.

Function reference
------------------

 -- Function: UNUR_PAR* unur_mcorr_new (const UNUR_DISTR* DISTRIBUTION)
     Get default parameters for generator.

 -- Function: int unur_mcorr_set_eigenvalues (UNUR_PAR* PAR, const
          DOUBLE* EIGENVALUES)
     Sets the (optional) eigenvalues of the correlation matrix.  If
     set, then the Marsaglia and Olkin algorithm will be used to
     generate random correlation matrices with given eigenvalues.

     Important: the given eigenvalues of the correlation matrix must be
     strictly positive and sum to the dimension of the matrix.  If
     non-positive eigenvalues are attempted, no eigenvalues are set and
     an error code is returned.  In case, that their sum is different
     from the dimension, an implicit scaling to give the correct sum is
     performed.

 -- Function: int unur_mcorr_chg_eigenvalues (UNUR_GEN* GEN, const
          DOUBLE* EIGENVALUES)
     Change the eigenvalues of the correlation matrix.  One must run
     `unur_reinit' to reinitialize the generator object then.


File: unuran.info,  Node: Methods_for_UNID,  Next: Meta_Methods,  Prev: Methods_for_MATR,  Up: Methods

5.10 Methods for uniform univariate distributions
=================================================

* Menu:

* UNIF:: wrapper for UNIForm random number generator


File: unuran.info,  Node: UNIF,  Up: Methods_for_UNID

5.10.1 UNIF  -  wrapper for UNIForm random number generator
-----------------------------------------------------------

UNIF is a simple wrapper that makes it possible to use a uniform random
number generator as a UNU.RAN generator. There are no parameters for
this method.

How To Use
..........

Create a generator object with `NULL' as argument. The created generator
object returns raw random numbers from the underlying uniform random
number generator.

Function reference
------------------

 -- Function: UNUR_PAR* unur_unif_new (const UNUR_DISTR* DUMMY)
     Get default parameters for generator.  UNIF does not need a
     distribution object. DUMMY is not used and can (should) be set to
     `NULL'. It is used to keep the API consistent.


File: unuran.info,  Node: Meta_Methods,  Prev: Methods_for_UNID,  Up: Methods

5.11 Meta Methods for univariate distributions
==============================================

* Menu:

* MIXT:: MIXTure of distributions

Example
-------

     /* ------------------------------------------------------------- */
     /* File: example_mixt.c                                          */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */
     /* Mixture of a Gaussian and a Cauchy distribution.              */
     /* ------------------------------------------------------------- */

     int main(void)
     {
       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;   /* distribution object                    */
       UNUR_PAR   *par;     /* parameter object                       */
       UNUR_GEN   *comp[2]; /* array of generator objects (components)*/
       UNUR_GEN   *gen;     /* generator object for mixture           */

       double prob[2];      /* array of probabilities                 */

       int    i;            /* loop variable                          */
       double x;            /* will hold the random number            */

       /* Create generators for components                            */
       distr = unur_distr_normal(NULL,0);   /* Gaussian distribution  */
       par = unur_pinv_new(distr);          /* choose method PINV     */
       comp[0] = unur_init(par);            /* initialize             */
       unur_distr_free(distr);              /* free distribution obj. */

       distr = unur_distr_cauchy(NULL,0);   /* Cauchy distribution    */
       par = unur_tdr_new(distr);           /* choose method TDR      */
       comp[1] = unur_init(par);            /* initialize             */
       unur_distr_free(distr);              /* free distribution obj. */

       /* Probabilities for components (need not sum to 1)            */
       prob[0] = 0.4;
       prob[1] = 0.3;

       /* Create mixture */
       par = unur_mixt_new(2,prob,comp);

       /* Initialize generator object                                 */
       gen = unur_init(par);

       /* we do not need the components any more */
       for (i=0; i<2; i++)
         unur_free(comp[i]);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */

Example (Inversion)
-------------------

     /* ------------------------------------------------------------- */
     /* File: example_mixt_inv.c                                      */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header file.                                   */
     #include <unuran.h>

     /* ------------------------------------------------------------- */
     /* Mixture of truncated Gaussian on (-INFINITY,0] and            */
     /* Exponential distribution on [0,INFINITY)                      */
     /* ------------------------------------------------------------- */

     int main(void)
     {
       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;   /* distribution object                    */
       UNUR_PAR   *par;     /* parameter object                       */
       UNUR_GEN   *comp[2]; /* array of generator objects (components)*/
       UNUR_GEN   *gen;     /* generator object for mixture           */

       double prob[2];      /* array of probabilities                 */

       int    i;            /* loop variable                          */
       double x;            /* will hold the random number            */

       /* Create generators for components                            */
       distr = unur_distr_normal(NULL,0);   /* Gaussian distribution  */
       unur_distr_cont_set_domain(distr,-UNUR_INFINITY,0);
       par = unur_pinv_new(distr);          /* choose method PINV     */
       comp[0] = unur_init(par);            /* initialize             */
       unur_distr_free(distr);              /* free distribution obj. */

       distr = unur_distr_exponential(NULL,0); /* Exponential distr.  */
       par = unur_pinv_new(distr);          /* choose method PINV     */
       comp[1] = unur_init(par);            /* initialize             */
       unur_distr_free(distr);              /* free distribution obj. */

       /* Probabilities for components (need not sum to 1)            */
       prob[0] = 0.4;
       prob[1] = 0.3;

       /* Create mixture */
       par = unur_mixt_new(2,prob,comp);

       /* We want to use inversion for the mixture as well.           */
       /* (Thus the above order of the components is important!)      */
       unur_mixt_set_useinversion(par,TRUE);

       /* Initialize generator object                                 */
       gen = unur_init(par);

       /* we do not need the components any more */
       for (i=0; i<2; i++)
         unur_free(comp[i]);

       /* It is important to check if the creation of the generator   */
       /* object was successful. Otherwise `gen' is the NULL pointer  */
       /* and would cause a segmentation fault if used for sampling.  */
       if (gen == NULL) {
          fprintf(stderr, "ERROR: cannot create generator object\n");
          exit (EXIT_FAILURE);
       }

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* When you do not need the generator object any more, you     */
       /* can destroy it.                                             */
       unur_free(gen);

       exit (EXIT_SUCCESS);

     } /* end of main() */

     /* ------------------------------------------------------------- */


File: unuran.info,  Node: MIXT,  Up: Meta_Methods

5.11.1 MIXT  -  MIXTure of distributions
----------------------------------------

MIXT allows to sample from a mixture of univariate distributions.

   Let f_1,...,f_n be PDFs of various distributions called the
components and (p_1,...,p_n) be a probability vector. Then f(x) = p_1 *
f_1(x) + ...+ p_n * f_n(x) is the PDF of the so called mixture of these
distributions.

   Method MIXT takes generator objects for the components and a
probability vector and creates a generator object for this mixture.

   The sampling part works as follows:

  1. Generate an index J as the realisation of a discrete random
     variate with the given probability vector.  This is done by means
     of method DGT (*note Guide Table method: DGT.).

  2. Generate a random variate X with PDF f_J.

   When the (interior of the) domains of the the components are
disjoint then it is possible to sample from the mixture by inversion,
provided that the following conditions are met:

   - The generator objects must use an inversion method for each
     component.

   - The domains of the PDFs f_i must not overlap.

   - The components must be ordered with respect to their domains.

How To Use
..........

Create generator objects for the components of the mixture and store
the corresponding pointers in an array.  Store all probabilities an a
double array of the same size.  Create the parameter object for the
generator of the mixture distribution by means of `unur_mixt_new'.  The
components of the mixture can be any continuous or discrete univariate
distributions. This also includes generators for empirical
distributions and mixtures of distributions.  In particular, mixtures
can also be defined recursively.

   _Remark:_ The components of the mixture can be continuous or discrete
distributions. The resulting mixture, however, is always a continuous
distribution and thus `unur_sample_cont' must be used!

   The inversion method can be switched on by means of
`unur_mixt_set_useinversion' call.  However, the conditions for this
method must then be met.  Otherwise, initialization of the mixture
object fails.

Function reference
------------------

 -- Function: UNUR_PAR* unur_mixt_new (int N, const DOUBLE* PROB,
          UNUR_GEN** COMP)
     Get default parameters for the generator for a mixture of the
     distributions given in the array COMP (components) of length N.
     The probabilities are given by PROB.

     The generators in COMP must be objects for (continuous or
     discrete) univariate distributions

 -- Function: int unur_mixt_set_useinversion (UNUR_PAR* PARAMETERS, int
          USEINV)
     If USEINV is `TRUE', then the inversion method is used for
     sampling from the mixture distribution.

     However, the following conditions must be satisfied:

        - The generator objects must use an inversion method for each
          component.

        - The domains of the components must not overlap.

        - The components must be ordered with respect to their domains.

     If one of these conditions is violated, then initialization of the
     mixture object fails.

     Default is `FALSE'.


File: unuran.info,  Node: URNG,  Next: Stddist,  Prev: Methods,  Up: Top

6 Using uniform random number generators
****************************************

* Menu:

* URNG-FVOID:: Simple interface for uniform random number generators
* URNG-GSL:: Interface to GSL uniform random number generators
* URNG-GSLQRNG:: Interface to GSL generators for quasi-random points
* URNG-PRNG:: Interface to Otmar Lendl's pseudo-random number generators
* URNG-RNGSTREAM:: Interface to L'Ecuyer's RNGSTREAM random number generators
* URNG-RANDOMSHIFT:: Combine point set generator with random shifts

   UNU.RAN is designed to work with many sources of (pseudo-) random
numbers or low discrepancy numbers (so called quasi-random numbers) for
almost all tasks in discrete event simulation, (quasi-) Monte Carlo
integration or any other stochastic methods. Hence UNU.RAN uses
pointers to access uniform (pseudo-) random number generators (URNG).

   Each UNU.RAN (non-uniform random variate) generator object has a
pointer to a URNG object. Thus each UNU.RAN generator object may have
its own (independent) URNG or several generator objects can share the
same URNG.

   If no URNG is provided for a parameter or generator object a default
generator is used which is the same for all generators. This URNG is
defined in `unuran_config.h' at compile time and can be changed at
runtime.

   UNU.RAN uses a unified interface for all sources of random numbers.
Unfortunately, the API for random number generators, like the `GSL'
(GNU Scientific Library), Otmar Lendl's `prng' (Pseudo random number
generators), or a single function implemented by the user herself, are
quite different.  Hence an object of type `UNUR_URNG' is introduced to
store the URNG. Thus it is possible to handle different sources of such
URNGs with the unified API. It is inspired from similar to Pierre
L'Ecuyers `RngStreams' library:

   - seed the random number generator;

   - get a uniform random number;

   - reset the URNG;

   - skip to the begining next substream;

   - sample antithetic numbers;

   - delete the URNG object.

   The routine to create a URNG depends on the chosen random number
generator (i.e. library). Nevertheless, there exist wrapper functions
to simplify this task.

   Currently the following sources of uniform random numbers are
directly supported (i.e., there exist wrapper functions).  Of course
other random number generation libraries can be used.

  1. `FVOID'

     URNGs of type `double uniform(void *state)'.  The argument STATE
     can be simply ignored in the implementation of `uniform' when a
     global state variable is used.  UNU.RAN contains some build-in
     URNGs of this type in directory `src/uniform/'.

  2. `PRNG'

     URNGs from Otmar Lendl's `prng' library. It provides a very
     flexible way to sample form arbitrary URNGs by means of an object
     oriented programing paradigma. Similarly to the UNU.RAN library
     independent generator objects can be build and used.

     This library has been developed by the pLab group at the university
     of Salzburg (Austria, EU) and implemented by Otmar Lendl.  It is
     available from `http://statmath.wu.ac.at/prng/' or from the pLab
     site at `http://random.mat.sbg.ac.at/'.

     This interface must be compiled into UNU.RAN using the configure
     flag `--with-urng-prng'.

  3. `RNGSTREAM'

     Pierre L'Ecuyer's `RngStream' library for multiple independent
     streams of pseudo-random numbers.  A GNU-style package is
     available from `http://statmath.wu.ac.at/software/RngStreams/'.

     This interface must be compiled into UNU.RAN using the configure
     flag `--with-urng-rngstream'.

  4. `GSL'

     URNG from the GNU Scientific Library (GSL).  It is available from
     `http://www.gnu.org/software/gsl/'.

     This interface must be compiled into UNU.RAN using the configure
     flag `--with-urng-gsl'.


How To Use
..........

Each UNU.RAN generator object has a pointer to a uniform (pseudo-)
random number generator (URNG). It can be set via the `unur_set_urng'
call. It is also possible to read this pointer via `unur_get_urng' or
change the URNG for an existing generator object by means of
`unur_chg_urng'.  It is important to note that these calls only copy
the pointer to the URNG object into the generator object.

   If no URNG is provided for a parameter or generator object a default
URNG is used which is the same for all generators. This URNG is defined
in `unuran_config.h' at compile time. A pointer to this default URNG
can be obtained via `unur_get_default_urng'.  Nevertheless, it is also
possible to change this default URNG by another one at runtime by means
of the `unur_set_default_urng' call. However, this only takes effect
for new parameter objects.

   Some generating methods provide the possibility of correlation
induction. For this feature a second auxiliary URNG is required.  It
can be set and changed by `unur_set_urng_aux' and `unur_chg_urng_aux'
calls, respectively. Since the auxiliary URNG is by default the same as
the main URNG, the auxiliary URNG must be set after any `unur_set_urng'
or `unur_chg_urng' call! Since in special cases mixing of two URNG
might cause problems, we supply a default auxiliary generator that can
be used by a `unur_use_urng_aux_default' call (after the main URNG has
been set). This default auxiliary generator can be changed with
analogous calls as the (main) default uniform generator.

   Uniform random number generators form different sources have
different programming interfaces. Thus UNU.RAN stores all information
about a particular uniform random number generator in a structure of
type `UNUR_URNG'. Before a URNG can be used with UNU.RAN an appropriate
object has to be created ba a `unur_urng_new' call.  This call takes
two arguments: the pointer to the sampling routine of the generator and
a pointer to a possible argument that stores the state of the
generator. The function must be of type `double (*sampleunif)(void
*params)', but functions without any argument also work.  Additionally
one can set pointers to functions for reseting or jumping the streams
generated by the URNG by the corresponding `set' calls.

   UNU.RAN provides a unified API to all sources of random numbers.
Notice, however, that not all functions work for all random number
generators (as the respective library has not implemented the
corresponding feature).

   There are wrapper functions for some libraries of uniform random
number generators to simplify the task of creating a UNU.RAN object for
URNGs.  These functions must be compiled into UNU.RAN using the
corresponding configure flags (see description of the respective
interface below).

Function reference
------------------

Set and get default uniform RNGs
--------------------------------

 -- Function: UNUR_URNG* unur_get_default_urng (void)
     Get the pointer to the default URNG. The default URNG is used by
     all generators where no URNG was set explicitly by a
     `unur_set_urng' call.

 -- Function: UNUR_URNG* unur_set_default_urng (UNUR_URNG* URNG_NEW)
     Change the default URNG that is used for new parameter objects.
     It returns the pointer to the old default URNG that has been used.

 -- Function: UNUR_URNG* unur_set_default_urng_aux (UNUR_URNG* URNG_NEW)
 -- Function: UNUR_URNG* unur_get_default_urng_aux (void)
     Analogous calls for default auxiliary generator.

Set, change and get uniform RNGs in generator objects
-----------------------------------------------------

 -- Function: int unur_set_urng (UNUR_PAR* PARAMETERS, UNUR_URNG* URNG)
     Use the URNG `urng' for the new generator. This overrides the
     default URNG. It also sets the auxiliary URNG to `urng'.

     _Important_: For multivariate distributions that use marginal
     distributions this call does not work properly.  It is then better
     first to create the generator object (by a `unur_init' call) and
     then change the URNG by means of `unur_chg_urng'.

 -- Function: UNUR_URNG* unur_chg_urng (UNUR_GEN* GENERATOR, UNUR_URNG*
          URNG)
     Change the URNG for the given generator. It returns the pointer to
     the old URNG that has been used by the generator.  It also changes
     the auxiliary URNG to `urng' and thus it overrides the last
     `unur_chg_urng_aux' call.

 -- Function: UNUR_URNG* unur_get_urng (UNUR_GEN* GENERATOR)
     Get the pointer to the URNG that is used by the GENERATOR.  This
     is usefull if two generators should share the same URNG.

 -- Function: int unur_set_urng_aux (UNUR_PAR* PARAMETERS, UNUR_URNG*
          URNG_AUX)
     Use the auxiliary URNG `urng_aux' for the new generator.  (Default
     is the default URNG or the URNG from the last `unur_set_urng'
     call. Thus if the auxiliary generator should be different to the
     main URNG, `unur_set_urng_aux' must be called after
     `unur_set_urng'.  The auxiliary URNG is used as second stream of
     uniform random number for correlation induction.  It is not
     possible to set an auxiliary URNG for a method that does not need
     one. In this case an error code is returned.

 -- Function: int unur_use_urng_aux_default (UNUR_PAR* PARAMETERS)
     Use the default auxiliary URNG.  (It must be set after
     `unur_get_urng'.  ) It is not possible to set an auxiliary URNG
     for a method that does not use one (i.e. the call returns an error
     code).

 -- Function: int unur_chgto_urng_aux_default (UNUR_GEN* GENERATOR)
     Switch to default auxiliary URNG.  (It must be set after
     `unur_get_urng'.  ) It is not possible to set an auxiliary URNG
     for a method that does not use one (i.e. the call returns an error
     code).

 -- Function: UNUR_URNG* unur_chg_urng_aux (UNUR_GEN* GENERATOR,
          UNUR_URNG* URNG_AUX)
     Change the auxiliary URNG for the given GENERATOR. It returns the
     pointer to the old auxiliary URNG that has been used by the
     generator. It has to be called after each `unur_chg_urng' when the
     auxiliary URNG should be different from the main URNG.  It is not
     possible to change the auxiliary URNG for a method that does not
     use one (i.e. the call `NULL').

 -- Function: UNUR_URNG* unur_get_urng_aux (UNUR_GEN* GENERATOR)
     Get the pointer to the auxiliary URNG that is used by the
     GENERATOR. This is usefull if two generators should share the same
     URNG.

Handle uniform RNGs
-------------------

_Notice:_ Some of the below function calls do not work for every source
of random numbers since not every library has implemented these
features.

 -- Function: double unur_urng_sample (UNUR_URNG* URNG)
     Get a uniform random number from URNG.  If the `NULL' pointer is
     given, the default uniform generator is used.

 -- Function: double unur_sample_urng (UNUR_GEN* GEN)
     Get a uniform random number from the underlying uniform random
     number generator of generator GEN.  If the `NULL' pointer is
     given, the default uniform generator is used.

 -- Function: int unur_urng_sample_array (UNUR_URNG* URNG, double* X,
          int DIM)
     Set array X of length DIM with uniform random numbers sampled from
     generator URNG. If URNG is the `NULL' pointer, the default uniform
     generator is used.

     _Important:_ If URNG is based on a point set generator (this is
     the case for generators of low discrepance point sets as used in
     quasi-Monte Carlo methods) it has a "natural dimension" s.  In
     this case either only the first s entries of X are filled (if s <
     DIM), or the first DIM coordinates of the generated point are
     filled.

     The called returns the actual number of entries filled. In case of
     an error `0' is returned.

 -- Function: int unur_urng_reset (UNUR_URNG* URNG)
     Reset URNG object.  The routine tries two ways to reset the
     generator (in this order):

       1. It uses the reset function given by an `unur_urng_set_reset'
          call.

       2. It uses the seed given by the last `unur_urng_seed' call
          (which requires a seeding function given by a
          `unur_urng_set_seed' call).

     If neither of the two methods work resetting of the generator is
     not possible and an error code is returned.

     If the `NULL' pointer is given, the default uniform generator is
     reset.

 -- Function: int unur_urng_sync (UNUR_URNG* URNG)
     Jump into defined state ("sync") of the generator. This is useful
     when point generators are used where the coordinates are sampled
     via `unur_urng_sample'.  Then this call can be used to jump to the
     first coordinate of the next generated point.

 -- Function: int unur_urng_seed (UNUR_URNG* URNG, unsigned LONG SEED)
     Set SEED for generator URNG.  It returns an error code if this is
     not possible for the given URNG. If the `NULL' pointer is given,
     the default uniform generator is seeded (if possible).

     _Notice_: Seeding should be done only once for a particular
     generator (except for resetting it to the initial state).
     Expertise is required when multiple seeds are used to get
     independent streams. Thus we recommend appropriate libraries for
     this task, e.g. Pierre L'Ecuyer's `RngStreams' package. For this
     library only a package seed can be set and thus the
     `unur_urng_seed' call will not have any effect to generators of
     this type. Use `unur_urng_reset' or `unur_urng_rngstream_new'
     instead, depending whether one wants to reset the stream or get a
     new stream that is independent from the previous ones.

 -- Function: int unur_urng_anti (UNUR_URNG* URNG, int ANTI)
     Switch to antithetic random numbers in URNG.  It returns an error
     code if this is not possible for the given URNG.

     If the `NULL' pointer is given, the antithetic flag of the default
     uniform generator is switched (if possible).

 -- Function: int unur_urng_nextsub (UNUR_URNG* URNG)
     Jump to start of the next substream of URNG.  It returns an error
     code if this is not possible for the given URNG.

     If the `NULL' pointer is given, the default uniform generator is
     set to the start of the next substream (if possible).

 -- Function: int unur_urng_resetsub (UNUR_URNG* URNG)
     Jump to start of the current substream of URNG.  It returns an
     error code if this is not possible for the given URNG.

     If the `NULL' pointer is given, the default uniform generator is
     set to the start of the current substream (if possible).

 -- Function: int unur_gen_sync (UNUR_GEN* GENERATOR)
 -- Function: int unur_gen_seed (UNUR_GEN* GENERATOR, unsigned LONG
          SEED)
 -- Function: int unur_gen_anti (UNUR_GEN* GENERATOR, int ANTI)
 -- Function: int unur_gen_reset (UNUR_GEN* GENERATOR)
 -- Function: int unur_gen_nextsub (UNUR_GEN* GENERATOR)
 -- Function: int unur_gen_resetsub (UNUR_GEN* GENERATOR)
     Analogous to `unur_urng_sync', `unur_urng_seed' , `unur_urng_anti',
     `unur_urng_reset' , `unur_urng_nextsub', and `unur_urng_resetsub',
     but act on the URNG object used by the GENERATOR object.

     _Warning:_ These calls should be used with care as it influences
     all generator objects that share the same URNG object!

API to create a new URNG object
-------------------------------

_Notice:_ These functions are provided to built a UNUR_URNG object for
a particular external random number generator from scratch. For some
libraries that contain random number generators (like the GSL) there
are special calls, e.g.  `unur_urng_gsl_new', to get such an object.
Then there is no need to change the UNUR_URNG object as it already
contains all available features.

   If you have a particular library for random number generators you
can either write wrapper function like those in
`src/uniform/urng_gsl.c' or write an email to the authors of UNU.RAN to
write it for you.

 -- Function: UNUR_URNG* unur_urng_new (double (* SAMPLEUNIF)(void*
          state ), void* STATE)
     Get a new URNG object.  SAMPLEUNIF is a function to the uniform
     sampling routine, STATE a pointer to its arguments which usually
     contains the state variables of the generator.

     Functions SAMPLEUNIF with a different type for P or without an
     argument at all also work. A typecast might be necessary to avoid
     compiler warnings or error messages.

     For functions SAMPLEUNIF that does not have any argument should
     use `NULL' for STATE.

     _Important:_ SAMPLEUNIF must not be the `NULL' pointer.

     There are appropriate calls that simplifies the task of creating
     URNG objects for some libraries with uniform random number
     generators, see below.

 -- Function: void unur_urng_free (UNUR_URNG* URNG)
     Destroy URNG object.  It returns an error code if this is not
     possible.

     If the `NULL' is given, this function does nothing.

     _Warning:_ This call must be used with care. The URNG object must
     not be used by any existing generator object!  It is designed to
     work in conjunction with the wrapper functions to create URNG
     objects for generators of a particular library.  Thus an object
     created by an `unur_urng_prng_new' call can be simply destroyed by
     an `unur_urng_free' call.

 -- Function: int unur_urng_set_sample_array (UNUR_URNG* URNG, unsigned
          int(* SAMPLEARRAY)(void* state, double* X, int DIM ))
     Set function to fill array X of length DIM with random numbers
     generated by generator URNG (if available).

 -- Function: int unur_urng_set_sync (UNUR_URNG* URNG, void (*
          SYNC)(void* state ))
     Set function for jumping into a defined state ("sync").

 -- Function: int unur_urng_set_seed (UNUR_URNG* URNG, void (*
          SETSEED)(void* state, unsigned LONG SEED ))
     Set function to seed generator URNG (if available).

 -- Function: int unur_urng_set_anti (UNUR_URNG* URNG, void (*
          SETANTI)(void* state, int ANTI ))
     Set function to switch the antithetic flag of generator URNG (if
     available).

 -- Function: int unur_urng_set_reset (UNUR_URNG* URNG, void (*
          RESET)(void* state ))
     Set function for reseting the uniform random number generator URNG
     (if available).

 -- Function: int unur_urng_set_nextsub (UNUR_URNG* URNG, void (*
          NEXTSUB)(void* state ))
     Set function that allows jumping to start of the next substream of
     URNG (if available).

 -- Function: int unur_urng_set_resetsub (UNUR_URNG* URNG, void (*
          RESETSUB)(void* state ))
     Set function that allows jumping to start of the current substream
     of URNG (if available).

 -- Function: int unur_urng_set_delete (UNUR_URNG* URNG, void (*
          FPDELETE)(void* state ))
     Set function for destroying URNG (if available).


File: unuran.info,  Node: URNG-FVOID,  Next: URNG-GSL,  Up: URNG

6.1 Simple interface for uniform random number generators
=========================================================

Simple interface for URNGs of type `double uniform(void *state)'.

   UNU.RAN contains some build-in URNGs of this type:
`unur_urng_MRG31k3p'
     Combined multiple recursive generator by Pierre L'Ecuyer and Renee
     Touzin.

`unur_urng_fish'
     Linear congruential generator by Fishman and Moore.

`unur_urng_mstd'
     Linear congruential generator "Minimal Standard" by Park and
     Miller.

   Notice, however, that these generators are provided as a fallback
for the case that no state-of-the-art uniform random number generators
(e.g. *note Pierre L'Ecuyer's `Rngstream' library: URNG-RNGSTREAM.) are
used.

How To Use
..........

Create an URNG object using `unur_urng_fvoid_new'.  By this call a
pointer to the sampling routine and (optional) a pointer to a reset
routine are copied into the URNG object.  Other functions, like seeding
the URNG, switching to antithetic random number, or jumping to next
substream, can be added to the URNG object by the respective calls,
e.g. by `unur_urng_set_seed'.  The following routines are supported for
URNG objects of this type:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_seed' [optional]

   - `unur_urng_reset' [optional]

   - `unur_urng_free'

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_fvoid_new (double (* URAND)(void*
          state ), void (* RESET)(void* state ))
     Make a URNG object for a generator that consists of a single
     function call URAND.

     If there is no RESET function use `NULL' for the second argument.


File: unuran.info,  Node: URNG-GSL,  Next: URNG-GSLQRNG,  Prev: URNG-FVOID,  Up: URNG

6.2 Interface to GSL uniform random number generators
=====================================================

Interface to the uniform random number generators from the GNU
Scientific Library (GSL). Documentation and source code of this library
is available from `http://www.gnu.org/software/gsl/'.

   The interface to the GSL must be compiled into UNU.RAN using the
configure flag `--with-urng-gsl'.  Notice that the GSL has to be
installed before running `./configure'.

How To Use
..........

When using this interface `unuran_urng_gsl.h' must be included in the
corresponding C file, i.e., one must add the line
     #include <unuran_urng_gsl.h>

   Moreover, one must not forget to link the executable against
`libgsl'.

   The following routines are supported for URNG objects of type GSL:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_seed'

   - `unur_urng_reset'

   - `unur_urng_free'

     /* ------------------------------------------------------------- */
     /* File: example_gsl.c                                           */
     /* ------------------------------------------------------------- */
     #ifdef UNURAN_SUPPORTS_GSL
     /* ------------------------------------------------------------- */
     /* This example makes use of the GSL library for generating      */
     /* uniform random numbers.                                       */
     /* (see http://www.gnu.org/software/gsl/)                        */
     /* To compile this example you must have set                     */
     /*   ./configure --with-urng-gsl                                 */
     /* (Of course the executable has to be linked against the        */
     /* GSL library.)                                                 */
     /* ------------------------------------------------------------- */

     /* Include UNURAN header files.                                  */
     #include <unuran.h>
     #include <unuran_urng_gsl.h>

     /* ------------------------------------------------------------- */

     int main(void)
     {
       int    i;          /* loop variable                            */
       double x;          /* will hold the random number              */

       /* Declare the three UNURAN objects.                           */
       UNUR_DISTR *distr;    /* distribution object                   */
       UNUR_PAR   *par;      /* parameter object                      */
       UNUR_GEN   *gen;      /* generator object                      */

       /* Declare objects for uniform random number generators.       */
       UNUR_URNG  *urng;     /* uniform generator objects             */

       /* GNU Scientific Library only:                                */
       /* Make a object for uniform random number generator.          */
       urng = unur_urng_gsl_new(gsl_rng_mt19937);
       if (urng == NULL) exit (EXIT_FAILURE);

       /* Create a generator object using this URNG */
       distr = unur_distr_normal( NULL, 0 );
       par = unur_tdr_new(distr);
       unur_set_urng( par, urng );
       gen = unur_init(par);
       if (gen == NULL)  exit (EXIT_FAILURE);
       unur_distr_free(distr);

       /* Now you can use the generator object `gen' to sample from   */
       /* the distribution. Eg.:                                      */
       for (i=0; i<10; i++) {
         x = unur_sample_cont(gen);
         printf("%f\n",x);
       }

       /* Destroy objects */
       unur_free(gen);
       unur_urng_free(urng);

       exit (EXIT_SUCCESS);
     } /* end of main() */

     /* ------------------------------------------------------------- */
     #else
     #include <stdio.h>
     #include <stdlib.h>
     int main(void) {
       printf("You must enable the GSL to run this example!\n\n");
       exit (77);    /* exit code for automake check routines */
     }
     #endif
     /* ------------------------------------------------------------- */

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_gsl_new (const GSL_RNG_TYPE*
          URNGTYPE)
     Make object for URNGs from the `GSL' (GNU Scientific Library).
     URNGTYPE is the type of the chosen generator as described in the
     GSL manual (see Section Random Number Generation). This library is
     available from `http://www.gnu.org/software/gsl/'.

 -- Function: UNUR_URNG* unur_urng_gslptr_new (gsl_rng* URNG)
     Similar to `unur_urng_gsl_new' but it uses a pointer to a
     generator object as returned by `gsl_rng_alloc(rng_type)'; see
     `GSL' manual for details.

     _Notice_: There is a subtle but important difference between these
     two calls. When a generator object is created by a
     `unur_urng_gsl_new' call, then resetting of the generator works.
     When a generator object is created by a `unur_urng_gslptr_new'
     call, then resetting only works after a
     `unur_urng_seed(urng,myseed)' call.


File: unuran.info,  Node: URNG-GSLQRNG,  Next: URNG-PRNG,  Prev: URNG-GSL,  Up: URNG

6.3 Interface to GSL generators for quasi-random points
=======================================================

Interface to the generators for quasi-random points (also called low
discrepancy point sets) from the GNU Scientific Library (GSL).
Documentation and source code of this library is available from
`http://www.gnu.org/software/gsl/'.

   The interface to the GSL must be compiled into UNU.RAN using the
configure flag `--with-urng-gsl'.  Notice that the GSL has to be
installed before running `./configure'.

How To Use
..........

When using this interface `unuran_urng_gsl.h' must be included in the
corresponding C file, i.e., one must add the line
     #include <unuran_urng_gsl.h>

   Moreover, one must not forget to link the executable against
`libgsl'.

   The following routines are supported for URNG objects of this type:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_reset'

   - `unur_urng_sync'

   - `unur_urng_free'
   `unur_urng_sync' is used to jump to the first coordinate of the next
point generated by the generator.

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_gslqrng_new (const GSL_QRNG_TYPE*
          QRNGTYPE, unsigned INT DIM)
     Make object for quasi-random point generators for dimension DIM
     from the `GSL' (GNU Scientific Library).  QRNGTYPE is the type of
     the chosen generator as described in the GSL manual (see section
     Quasi-Random Sequences).  This library is available from
     `http://www.gnu.org/software/gsl/'.


File: unuran.info,  Node: URNG-PRNG,  Next: URNG-RNGSTREAM,  Prev: URNG-GSLQRNG,  Up: URNG

6.4 Interface to Otmar Lendl's pseudo-random number generators
==============================================================

URNGs from Otmar Lendl's `prng' library. It provides a very flexible
way to sample form arbitrary URNGs by means of an object oriented
programing paradigma. Similarly to the UNU.RAN library independent
generator objects can be build and used.

   This library has been developed by the pLab group at the university
of Salzburg (Austria, EU) and implemented by Otmar Lendl.  It is
available from `http://statmath.wu.ac.at/prng/' or from the pLab site at
`http://random.mat.sbg.ac.at/'.

   The interface to the PRNG library must be compiled into UNU.RAN
using the configure flag `--with-urng-prng'.  Notice that the PRNG
library has to be installed before running `./configure'.

How To Use
..........

When using this interface `unuran_urng_prng.h' must be included in the
corresponding C file, i.e., one must add the line
     #include <unuran_urng_prng.h>

   Moreover, one must not forget to link the executable against
`libprng'.

   The following routines are supported for URNG objects of type PRNG:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_seed' (availability depends on chosen PRNG generator!)

   - `unur_urng_reset'

   - `unur_urng_free'

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_prng_new (const CHAR* PRNGSTR)
     Make object for URNGs from Otmar Lendl's `prng' package.  PRNGSTR
     is a string that contains the necessary information to create a
     uniform random number generator. For the format of this string see
     the `prng' user manual.

     The `prng' library provides a very flexible way to sample form
     arbitrary URNGs by means of an object oriented programing
     paradigma. Similarly to the UNU.RAN library independent generator
     objects can be build and used. The library has been developed and
     implemented by Otmar Lendl as member of the pLab group at the
     university of Salzburg (Austria, EU).

     It is available via anonymous ftp from
     `http://statmath.wu.ac.at/prng/' or from the pLab site at
     `http://random.mat.sbg.ac.at/'.

 -- Function: UNUR_URNG* unur_urng_prngptr_new (struct PRNG* URNG)
     Similar to `unur_urng_prng_new' but it uses a pointer to a
     generator object as returned by `prng_new(prngstr)'; see `prng'
     manual for details.


File: unuran.info,  Node: URNG-RNGSTREAM,  Next: URNG-RANDOMSHIFT,  Prev: URNG-PRNG,  Up: URNG

6.5 Interface to L'Ecuyer's RNGSTREAM random number generators
==============================================================

URNGs from Pierre L'Ecuyer's `RngStream' library for multiple
independent streams of pseudo-random numbers.  This library provides
multiple independent streams of pseudo-random numbers which itselves
can be splitted into many substreams. It is available from
`http://www.iro.umontreal.ca/~lecuyer/myftp/streams00/c/'.  A GNU-style
package is available from
`http://statmath.wu.ac.at/software/RngStreams/'.

   The interface to the RngStream library must be compiled into UNU.RAN
using the configure flag `--with-urng-rngstream'.  Notice that the
RngStream library has to be installed before running `./configure'.

How To Use
..........

When using this interface `unuran_urng_rngstream.h' must be included in
the corresponding C file, i.e., one must add the line
     #include <unuran_urng_rngstream.h>

   Moreover, one must not forget to link the executable against the
`RngStream' library (i.e., when using the GNU-style package in UNIX
like environments one has to add `-lrngstreams' when linking an
executable).

   Notice that the `rngstream' library uses a package seed, that means
one should seed the uniform random number generator only once in an
application using the routine `RngStream_SetPackageSeed':

     unsigned long seed[] = {111u, 222u, 333u, 444u, 555u, 666u};
     RngStream_SetPackageSeed(seed);

   The following routines are supported for URNG objects of this type:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_reset'

   - `unur_urng_nextsub'

   - `unur_urng_resetsub'

   - `unur_urng_anti'

   - `unur_urng_free'

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_rngstream_new (const CHAR* URNGSTR)
     Make object for URNGs from Pierre L'Ecuyer's `RngStream' library.
     URNGSTR is an arbitrary string to label a stream. It need not be
     unique.

 -- Function: UNUR_URNG* unur_urng_rngstreamptr_new (RngStream
          RNGSTREAM)
     Similar to `unur_urng_rngstream_new' but it uses a pointer to a
     generator object as returned by `RngStream_CreateStream()'.


File: unuran.info,  Node: URNG-RANDOMSHIFT,  Prev: URNG-RNGSTREAM,  Up: URNG

6.6 Combine point set generator with random shifts
==================================================

Generators of type RANDOMSHIFT combine a point set generator with
generators to apply random shifts as proposed in [CPa76] :

  1. Sample and store a random vector S.

  2. Run a QMC simulation where S is added to each point of the
     generated quasi-random point (mod 1).

  3. Repeat steps 1 and 2.

How To Use
..........

Create a URNG object for a point set generator and a URNG object for a
generator to create shift vectors at random.  The meta URNG object can
then be created using `unur_urng_randomshift_new'.  Notice that only
pointers to the two underlying URNG generator objects are copied into
the newly created meta generator. Thus manipulating the meta URNG also
changes the underlying URNGs and vice versa.

   The following routines are supported for URNG objects of type
RANDOMSHIFT:

   - `unur_urng_sample'

   - `unur_urng_sample_array'

   - `unur_urng_reset'

   - `unur_urng_sync'

   - `unur_urng_randomshift_nextshift'

   - `unur_urng_free'
   `unur_urng_sync' is used to jump to the first coordinate of the next
point generated by the generator.  `unur_urng_randomshift_nextshift'
allows to replace the shift vector by another randomly chosen shift
vector.

   _Important:_ `unur_urng_sync' is only available if it is if it is
implemented for the underlying point set generator.

   _Important:_ `unur_urng_reset' is only available if it is available
for both underlying generators.

Function reference
------------------

 -- Function: UNUR_URNG* unur_urng_randomshift_new (UNUR_URNG* QRNG,
          UNUR_URNG* SRNG, int DIM)
     Make object for URNG with randomly shifted point sets.  QRNG is a
     generated that generates point sets of dimension DIM.  SRNG is a
     generated that generates random numbers or vectors.

     _Notice:_ Only pointers to the respective objects QRNG and SRNG
     are copied into the created meta generator. Thus manipulating the
     meta URNG also changes the underlying URNGs and vice versa.

 -- Function: int unur_urng_randomshift_nextshift (UNUR_URNG* URNG)
     Get the next (randomly chosen) vector for shifting the points set,
     and the underlying point generator QRNG is reset.


File: unuran.info,  Node: Stddist,  Next: Error_Debug,  Prev: URNG,  Up: Top

7 UNU.RAN Library of standard distributions
*******************************************

* Menu:

* Stddist_CONT:: UNU.RAN Library of continuous univariate distributions
* Stddist_CVEC:: UNU.RAN Library of continuous multivariate distributions
* Stddist_DISCR:: UNU.RAN Library of discrete univariate distributions
* Stddist_MATR:: UNU.RAN Library of random matrices

   Although it is not its primary target, many distributions are
already implemented in UNU.RAN.  This section presents these available
distributions and their parameters.

   The syntax to get a distribuion object for distributions `<dname>'
is:

 -- -: UNUR_DISTR* unur_distr_`<dname>' (double* PARAMS, int N_PARAMS)
     PARAMS is an array of doubles of size N_PARAMS holding the
     parameters.

E.g. to get an object for the gamma distribution (with shape parameter)
use
     unur_distr_gamma( params, 1 );

   Distributions may have default parameters with need not be given
explicitely.  E.g. The gamma distribution has three parameters: the
shape, scale and location parameter. Only the (first) shape parameter
is required. The others can be omitted and are then set by default
values.


     /* alpha = 5; default: beta = 1, gamma = 0 */
     double fpar[] = {5.};
     unur_distr_gamma( fpar, 1 );

     /* alpha = 5, beta = 3; default: gamma = 0 */
     double fpar[] = {5., 3.};
     unur_distr_gamma( fpar, 2 );

     /* alpha = 5, beta = 3, gamma = -2
     double fpar[] = {5., 3., -2.};
     unur_distr_gamma( fpar, 3 );


   *Important:* Naturally the computational accuracy limits the
possible parameters. There shouldn't be problems when the parameters of
a distribution are in a "reasonable" range but e.g. the normal
distribution N(10^15,1) won't yield the desired results.  (In this case
it would be better generating N(0,1) and _then_ transform the results.)
Of course computational inaccuracy is not specific to UNU.RAN and
should always be kept in mind when working with computers.

   _Important:_ The routines of the standard library are included for
non-uniform random variate generation and not to provide special
functions for statistical computations.

Remark
------

The following keywords are used in the tables:
PDF
     probability density function, with variable x.

PMF
     probability mass function, with variable k.

constant
     normalization constant for given PDF and PMF, resp.  They must be
     multiplied by constant to get the "real" PDF and PMF.

CDF
     gives information whether the CDF is implemented in UNU.RAN.

domain
     domain PDF and PMF, resp.

parameters  N_STD (N_TOTAL): list
     list of parameters for distribution, where N_STD is the number of
     parameters for the standard form of the distribution and N_TOTAL
     the total number for the (non-standard form of the) distribution.
     LIST is the list of parameters in the order as they are stored in
     the array of parameters. Optional parameter that can be omitted
     are enclosed in square brackets `[...]'.

     A detailed list of these parameters gives then the range of valid
     parameters and defaults for optional parameters that are used when
     these are omitted.

reference
     gives reference for distribution (*note Bibliography::).

special generators
     lists available special generators for the distribution.  The
     first number is the variant that to be set by
     `unur_cstd_set_variant' and `unur_dstd_set_variant' call,
     respectively.  If no variant is set the default variant `DEF' is
     used.  In the table the respective abbreviations `DEF' and `INV'
     are used for `UNUR_STDGEN_DEFAULT' and `UNUR_STDGEN_INVERSION'.
     Also the references for these methods are given (*note
     Bibliography::).

     Notice that these generators might be slower than universal
     methods.

     If `DEF' is ommited, the first entry is the default generator.



File: unuran.info,  Node: Stddist_CONT,  Next: Stddist_CVEC,  Up: Stddist

7.1 UNU.RAN Library of continuous univariate distributions
==========================================================

* Menu:

* F:: F-distribution
* beta:: Beta distribution
* cauchy:: Cauchy distribution
* chi:: Chi distribution
* chisquare:: Chisquare distribution
* exponential:: Exponential distribution
* extremeI:: Extreme value type I (Gumbel-type) distribution
* extremeII:: Extreme value type II (Frechet-type) distribution
* gamma:: Gamma distribution
* gig:: Generalized Inverse Gaussian distribution
* gig2:: Generalized Inverse Gaussian distribution
* hyperbolic:: Hyperbolic distribution
* ig:: Inverse Gaussian distribution
* laplace:: Laplace distribution
* logistic:: Logistic distribution
* lognormal:: Log-Normal distribution
* lomax:: Lomax distribution (Pareto distribution of second kind)
* normal:: Normal distribution
* pareto:: Pareto distribution (of first kind)
* powerexponential:: Powerexponential (Subbotin) distribution
* rayleigh:: Rayleigh distribution
* slash:: Slash distribution
* student:: Student's t distribution
* triangular:: Triangular distribution
* uniform:: Uniform distribution
* weibull:: Weibull distribution


File: unuran.info,  Node: F,  Next: beta,  Up: Stddist_CONT

7.1.1 `F'  -  F-distribution
----------------------------

PDF:
     (x^(nu_1/2-1)) / (1+nu_1/nu_2 x)^((nu_1+nu_2)/2)

constant:
     (nu_1/nu_2)^(nu_1/2) / B(nu_1/2,nu_2/2)

domain:
     0 < x < infinity

parameters 2 (2):  nu_1, nu_2
     No.     name                    default    
     `[0]'   nu_1      > 0                      (scale)
     `[1]'   nu_2      > 0                      (scale)

reference:
     [JKBc95: Ch.27; p.322]



File: unuran.info,  Node: beta,  Next: cauchy,  Prev: F,  Up: Stddist_CONT

7.1.2 `beta'  -  Beta distribution
----------------------------------

PDF:
     (x-a)^(p-1) * (b-x)^(q-1)

constant:
     1 / (B(p,q) * (b-a)^(p+q-1))

domain:
     a < x < b

parameters 2 (4):  p, q [, a, b ]
     No.     name                    default    
     `[0]'   p         > 0                      (scale)
     `[1]'   q         > 0                      (scale)
     `[2]'   a                       0          (location, scale)
     `[3]'   b         > a           1          (location, scale)

reference:
     [JKBc95: Ch.25; p.210]



File: unuran.info,  Node: cauchy,  Next: chi,  Prev: beta,  Up: Stddist_CONT

7.1.3 `cauchy'  -  Cauchy distribution
--------------------------------------

PDF:
     1/(1 + ((x-theta)/lambda)^2)

constant:
     1/(pi * lambda)

domain:
     -infinity < x < infinity

parameters 0 (2):  [ theta [, lambda ] ]
     No.     name                    default    
     `[0]'   theta                   0          (location)
     `[1]'   lambda    > 0           1          (scale)

reference:
     [JKBb94: Ch.16; p.299]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: chi,  Next: chisquare,  Prev: cauchy,  Up: Stddist_CONT

7.1.4 `chi'  -  Chi distribution
--------------------------------

PDF:
     x^(nu-1) * exp( -x^2/2 )

constant:
     1 / (2^((nu/2)-1) * Gamma(nu/2))

domain:
     0 <= x < infinity

parameters 1 (1):  nu
     No.     name                    default    
     `[0]'   nu        > 0                      (shape)

reference:
     [JKBb94: Ch.18; p.417]

special generators:

    `DEF'
          Ratio of Uniforms with shift (only for  nu >= 1)  [MJa87]



File: unuran.info,  Node: chisquare,  Next: exponential,  Prev: chi,  Up: Stddist_CONT

7.1.5 `chisquare'  -  Chisquare distribution
--------------------------------------------

PDF:
     x^((nu/2)-1) * exp( -x/2 )

constant:
     1 / (2^(nu/2) * Gamma(nu/2))

domain:
     0 <= x < infinity

parameters 1 (1):  nu
     No.     name                    default    
     `[0]'   nu        > 0                      (shape (degrees of
                                                freedom))

reference:
     [JKBb94: Ch.18; p.416]



File: unuran.info,  Node: exponential,  Next: extremeI,  Prev: chisquare,  Up: Stddist_CONT

7.1.6 `exponential'  -  Exponential distribution
------------------------------------------------

PDF:
     exp( -(x-theta)/sigma)

constant:
     1/sigma

domain:
     theta <= x < infinity

parameters 0 (2):  [ sigma [, theta ] ]
     No.     name                    default    
     `[0]'   sigma     > 0           1          (scale)
     `[1]'   theta                   0          (location)

reference:
     [JKBb94: Ch.19; p.494]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: extremeI,  Next: extremeII,  Prev: exponential,  Up: Stddist_CONT

7.1.7 `extremeI'  -  Extreme value type I (Gumbel-type) distribution
--------------------------------------------------------------------

PDF:
     exp( -exp( -(x-zeta)/theta ) - (x-zeta)/theta )

constant:
     1/theta

domain:
     -infinity < x <infinity

parameters 0 (2):  [ zeta [, theta ] ]
     No.     name                    default    
     `[0]'   zeta                    0          (location)
     `[1]'   theta     > 0           1          (scale)

reference:
     [JKBc95: Ch.22; p.2]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: extremeII,  Next: gamma,  Prev: extremeI,  Up: Stddist_CONT

7.1.8 `extremeII'  -  Extreme value type II (Frechet-type) distribution
-----------------------------------------------------------------------

PDF:
     exp( -((x-zeta)/theta)^(-k)) * ((x-zeta)/theta)^(-k-1)

constant:
     k/theta

domain:
     zeta < x <infinity

parameters 1 (3):  k [, zeta [, theta ] ]
     No.     name                    default    
     `[0]'   k         > 0                      (shape)
     `[1]'   zeta                    0          (location)
     `[2]'   theta     > 0           1          (scale)

reference:
     [JKBc95: Ch.22; p.2]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: gamma,  Next: gig,  Prev: extremeII,  Up: Stddist_CONT

7.1.9 `gamma'  -  Gamma distribution
------------------------------------

PDF:
     ((x-gamma)/beta)^(alpha-1) * exp( -(x-gamma)/beta )

constant:
     1 / (beta * Gamma(alpha))

domain:
     gamma < x < infinity

parameters 1 (3):  alpha [, beta [, gamma ] ]
     No.     name                    default    
     `[0]'   alpha     > 0                      (shape)
     `[1]'   beta      > 0           1          (scale)
     `[2]'   gamma                   0          (location)

reference:
     [JKBb94: Ch.17; p.337]

special generators:

    `DEF'
          Acceptance Rejection combined with Acceptance Complement
          [ADa74] [ADa82]

    `2'
          Rejection from log-logistic envelopes  [CHa77]



File: unuran.info,  Node: gig,  Next: gig2,  Prev: gamma,  Up: Stddist_CONT

7.1.10 `gig'  -  Generalized Inverse Gaussian distribution
----------------------------------------------------------

PDF:
     x^(theta-1) * exp( -1/2 * omega * (x/eta + eta/x))

constant:
     not implemented!

CDF:
     not implemented!

domain:
     0 < x <infinity

parameters 2 (3):  theta, omega [, eta ]
     No.     name                    default    
     `[0]'   theta                              (shape)
     `[1]'   omega     > 0                      (scale)
     `[2]'   eta       > 0           1          (shape)

reference:
     [JKBb94: Ch.15; p.84]

special generators:

    `DEF'
          Ratio-of-Uniforms method  [Dag89]



File: unuran.info,  Node: gig2,  Next: hyperbolic,  Prev: gig,  Up: Stddist_CONT

7.1.11 `gig2'  -  Generalized Inverse Gaussian distribution
-----------------------------------------------------------

PDF:
     x^(theta-1) * exp( -1/2 * (chi/x + psi*x))

constant:
     not implemented!

CDF:
     not implemented!

domain:
     0 < x <infinity

parameters 3 (3):  theta, psi, chi
     No.     name                    default    
     `[0]'   theta                              (shape)
     `[1]'   psi       > 0                      (shape)
     `[2]'   chi       > 0                      (shape)

reference:
     [JKBb94: Ch.15; p.84]



File: unuran.info,  Node: hyperbolic,  Next: ig,  Prev: gig2,  Up: Stddist_CONT

7.1.12 `hyperbolic'  -  Hyperbolic distribution
-----------------------------------------------

PDF:
     exp( -alpha * sqrt(delta^2 + (x - mu)^2) + beta*(x-mu) )

constant:
     not implemented!

CDF:
     not implemented!

domain:
     -infinity < x <infinity

parameters 4 (4):  alpha, beta, delta, mu
     No.     name                    default    
     `[0]'   alpha     >|beta|                  (shape (tail))
     `[1]'   beta                               (shape (asymmetry))
     `[2]'   delta     > 0                      (scale)
     `[3]'   mu                                 (location)


File: unuran.info,  Node: ig,  Next: laplace,  Prev: hyperbolic,  Up: Stddist_CONT

7.1.13 `ig'  -  Inverse Gaussian distribution
---------------------------------------------

PDF:
     sqrt( lambda/2*pi*x^3 ) * exp( -(lambda*(x-mu)^2)/2*mu^2*x )

constant:
     1

CDF:
     not implemented!

domain:
     0 < x <infinity

parameters 2 (2):  mu, lambda
     No.     name                    default    
     `[0]'   mu        > 0                      (mean)
     `[1]'   lambda    > 0                      (shape)

reference:
     [JKBb94: Ch.15; p.259]



File: unuran.info,  Node: laplace,  Next: logistic,  Prev: ig,  Up: Stddist_CONT

7.1.14 `laplace'  -  Laplace distribution
-----------------------------------------

PDF:
     exp( -|x-theta| / phi )

constant:
     1/(2 * phi)

domain:
     -infinity < x <infinity

parameters 0 (2):  [ theta [, phi ] ]
     No.     name                    default    
     `[0]'   theta                   0          (location)
     `[1]'   phi       > 0           1          (scale)

reference:
     [JKBc95: Ch.24; p.164]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: logistic,  Next: lognormal,  Prev: laplace,  Up: Stddist_CONT

7.1.15 `logistic'  -  Logistic distribution
-------------------------------------------

PDF:
     exp(-(x-alpha)/beta) * (1 + exp(-(x-alpha)/beta))^(-2)

constant:
     1/beta

domain:
     -infinity < x <infinity

parameters 0 (2):  [ alpha [, beta ] ]
     No.     name                    default    
     `[0]'   alpha                   0          (location)
     `[1]'   beta      > 0           1          (scale)

reference:
     [JKBc95: Ch.23; p.115]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: lognormal,  Next: lomax,  Prev: logistic,  Up: Stddist_CONT

7.1.16 `lognormal'  -  Log-Normal distribution
----------------------------------------------

PDF:
     1/(x-theta) * exp( -(log(x-theta)-zeta)^2/(2 sigma^2) )

constant:
     1/(sigma * sqrt(2 pi))

domain:
     theta <= x < infinity

parameters 2 (3):  zeta, sigma [, theta ]
     No.     name                    default    
     `[0]'   zeta                               (shape)
     `[1]'   sigma     > 0                      (shape)
     `[2]'   theta                   0          (location)

reference:
     [JKBb94: Ch.14; p. 208]



File: unuran.info,  Node: lomax,  Next: normal,  Prev: lognormal,  Up: Stddist_CONT

7.1.17 `lomax'  -  Lomax distribution (Pareto distribution of second kind)
--------------------------------------------------------------------------

PDF:
     (x+C)^(-(a+1))

constant:
     a * C^a

domain:
     0 <= x < infinity

parameters 1 (2):  a [, C ]
     No.     name                    default    
     `[0]'   a         > 0                      (shape)
     `[1]'   C         > 0           1          (scale)

reference:
     [JKBb94: Ch.20; p.575]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: normal,  Next: pareto,  Prev: lomax,  Up: Stddist_CONT

7.1.18 `normal'  -  Normal distribution
---------------------------------------

PDF:
     exp( -1/2 * ((x-mu)/sigma)^2 )

constant:
     1 / (sigma * sqrt(2 pi))

domain:
     -infinity < x < infinity

parameters 0 (2):  [ mu [, sigma ] ]
     No.     name                    default    
     `[0]'   mu                      0          (location)
     `[1]'   sigma     > 0           1          (scale)

reference:
     [JKBb94: Ch.13; p.80]

special generators:

    `DEF'
          ACR method (Acceptance-Complement Ratio)  [HDa90]

    `1'
          Box-Muller method  [BMa58]

    `2'
          Polar method with rejection  [MGa62]

    `3'
          Kindermann-Ramage method  [KRa76]

    `INV'
          Inversion method (slow)



File: unuran.info,  Node: pareto,  Next: powerexponential,  Prev: normal,  Up: Stddist_CONT

7.1.19 `pareto'  -  Pareto distribution (of first kind)
-------------------------------------------------------

PDF:
     x^(-(a+1))

constant:
     a * k^a

domain:
     k < x < infinity

parameters 2 (2):  k, a
     No.     name                    default    
     `[0]'   k         > 0                      (shape, location)
     `[1]'   a         > 0                      (shape)

reference:
     [JKBb94: Ch.20; p.574]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: powerexponential,  Next: rayleigh,  Prev: pareto,  Up: Stddist_CONT

7.1.20 `powerexponential'  -  Powerexponential (Subbotin) distribution
----------------------------------------------------------------------

PDF:
     exp( -|x|^tau )

constant:
     1 / (2 * Gamma(1+1/tau))

domain:
     -infinity < x < infinity

parameters 1 (1):  tau
     No.     name                    default    
     `[0]'   tau       > 0                      (shape)

reference:
     [JKBc95: Ch.24; p.195]

special generators:

    `DEF'
          Transformed density rejection (only for  tau >= 1)  [DLa86]



File: unuran.info,  Node: rayleigh,  Next: slash,  Prev: powerexponential,  Up: Stddist_CONT

7.1.21 `rayleigh'  -  Rayleigh distribution
-------------------------------------------

PDF:
     x * exp( -1/2 * (x/sigma)^2 )

constant:
     1 / sigma^2

domain:
     0 <= x < infinity

parameters 1 (1):  sigma
     No.     name                    default    
     `[0]'   sigma     > 0                      (scale)

reference:
     [JKBb94: Ch.18; p.456]



File: unuran.info,  Node: slash,  Next: student,  Prev: rayleigh,  Up: Stddist_CONT

7.1.22 `slash'  -  Slash distribution
-------------------------------------

PDF:
     (1 - exp(-x^2/2)) / x^2

constant:
     1 / sqrt(2 pi)

CDF:
     not implemented!

domain:
     -infinity < x < infinity

reference:
     [JKBb94: Ch.12; p.63]

special generators:

    `DEF'
          Ratio of normal and uniform random variates



File: unuran.info,  Node: student,  Next: triangular,  Prev: slash,  Up: Stddist_CONT

7.1.23 `student'  -  Student's t distribution
---------------------------------------------

PDF:
     (1+t^2/nu)^(-(nu+1)/2)

constant:
     1 / (sqrt(nu) * B(1/2,nu/2))

CDF:
     not implemented!

domain:
     -infinity < x < infinity

parameters 1 (1):  nu
     No.     name                    default    
     `[0]'   nu        > 0                      (shape)

reference:
     [JKBc95: Ch.28; p.362]



File: unuran.info,  Node: triangular,  Next: uniform,  Prev: student,  Up: Stddist_CONT

7.1.24 `triangular'  -  Triangular distribution
-----------------------------------------------

PDF:
     2*x / H,           for  0 <= x <= H

     2*(1-x) / (1-H),   for  H <= x <= 1

constant:
     1

domain:
     0 <= x <= 1

parameters 0 (1):  [ H ]
     No.     name                    default    
     `[0]'   H         0 <= H <= 1   1/2        (shape)

reference:
     [JKBc95: Ch.26; p.297]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: uniform,  Next: weibull,  Prev: triangular,  Up: Stddist_CONT

7.1.25 `uniform'  -  Uniform distribution
-----------------------------------------

PDF:
     1 / (b-a)

constant:
     1

domain:
     a < x < b

parameters 0 (2):  [ a, b ]
     No.     name                    default    
     `[0]'   a                       0          (location)
     `[1]'   b         > a           1          (location)

reference:
     [JKBc95: Ch.26; p.276]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: weibull,  Prev: uniform,  Up: Stddist_CONT

7.1.26 `weibull'  -  Weibull distribution
-----------------------------------------

PDF:
     ((x-zeta)/alpha)^(c-1) * exp( -((x-zeta)/alpha)^c )

constant:
     c / alpha

domain:
     zeta < x < infinity

parameters 1 (3):  c [, alpha [, zeta ] ]
     No.     name                    default    
     `[0]'   c         > 0                      (shape)
     `[1]'   alpha     > 0           1          (scale)
     `[2]'   zeta                    0          (location)

reference:
     [JKBb94: Ch.21; p.628]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: Stddist_CVEC,  Next: Stddist_DISCR,  Prev: Stddist_CONT,  Up: Stddist

7.2 UNU.RAN Library of continuous multivariate distributions
============================================================

* Menu:

* copula:: Copula (distribution with uniform marginals)
* multicauchy:: Multicauchy distribution
* multiexponential:: Multiexponential distribution
* multinormal:: Multinormal distribution
* multistudent:: Multistudent distribution


File: unuran.info,  Node: copula,  Next: multicauchy,  Up: Stddist_CVEC

7.2.1 `copula'  -  Copula (distribution with uniform marginals)
---------------------------------------------------------------


   `UNUR_DISTR *unur_distr_copula(int dim, const double *rankcorr)'
creates a distribution object for a copula with DIM components.
RANKCORR is an array of size DIMxDIM and holds the rank correlation
matrix (Spearman's correlation), where the rows of the matrix are
stored consecutively in this array. The `NULL' pointer can be used
instead the identity matrix.

   If COVAR is not a valid rank correlation matrix (i.e., not positive
definite) then no distribution object is created and `NULL' is returned.


File: unuran.info,  Node: multicauchy,  Next: multiexponential,  Prev: copula,  Up: Stddist_CVEC

7.2.2 `multicauchy'  -  Multicauchy distribution
------------------------------------------------

PDF:
     f(x) = 1 / ( 1 + (x-mu)^t . Sigma^(-1) . (x-mu) )^((dim+1)/2)

constant:
     Gamma((dim+1)/2) / ( pi^((dim+1)/2) * sqrt(det(Sigma)) )

domain:
     -infinity^(dim) < x < infinity^(dim)

parameters 0 (2):  [ mu, Sigma ]
     No.     name                    default    
     `[0]'   mu                      (0,...,0)  (location)
     `[1]'   Sigma     Symm, Pos.    I          (shape)
                       def.                     

special generators:

    `DEF'
          Cholesky factor



File: unuran.info,  Node: multiexponential,  Next: multinormal,  Prev: multicauchy,  Up: Stddist_CVEC

7.2.3 `multiexponential'  -  Multiexponential distribution
----------------------------------------------------------

PDF:
     f(x) = Prod_(i=0)^(i=dim-1) exp(-(dim-i) (x_(i)-x_(i-1) -
     (theta_i-theta_(i-1)) ) / sigma_i); with x_(-1)=0 and theta_(i-1)=0

constant:
     Prod_(i=0)^(i=dim-1) 1/sigma_i

domain:
     0^(dim) <= x < infinity^(dim)

parameters 0 (2):  [ sigma, theta ]
     No.     name                    default    
     `[0]'   sigma                   (1,...,1)  (shape)
     `[1]'   theta                   (0,...,0)  (location)


File: unuran.info,  Node: multinormal,  Next: multistudent,  Prev: multiexponential,  Up: Stddist_CVEC

7.2.4 `multinormal'  -  Multinormal distribution
------------------------------------------------

PDF:
     f(x) = exp( -1/2 * (x-mu)^t . Sigma^(-1) . (x-mu) )

constant:
     1 / ( (2 pi)^(dim/2) * sqrt(det(Sigma)) )

domain:
     -infinity^(dim) < x < infinity^(dim)

parameters 0 (2):  [ mu, Sigma ]
     No.     name                    default    
     `[0]'   mu                      (0,...,0)  (location)
     `[1]'   Sigma     Symm, Pos.    I          (shape)
                       def.                     

reference:
     [KBJe00: Ch.45; p.105]



File: unuran.info,  Node: multistudent,  Prev: multinormal,  Up: Stddist_CVEC

7.2.5 `multistudent'  -  Multistudent distribution
--------------------------------------------------

PDF:
     f(x) = 1 / ( 1 + (x-mu)^t . Sigma^(-1) . (x-mu) / m)^((dim+m)/2) )

constant:
     Gamma((dim+m)/2) / ( Gamma(m/2) (m*pi)^(dim/2) * sqrt(det(Sigma)) )

domain:
     -infinity^(dim) < x < infinity^(dim)

parameters 0 (3):  [ m, mu, Sigma ]
     No.     name                    default    
     `[0]'   m         m>0           1          (location)
     `[1]'   mu                      (0,...,0)  (location)
     `[2]'   Sigma     Symm, Pos.    I          (shape)
                       def.                     


File: unuran.info,  Node: Stddist_DISCR,  Next: Stddist_MATR,  Prev: Stddist_CVEC,  Up: Stddist

7.3 UNU.RAN Library of discrete univariate distributions
========================================================

* Menu:

* binomial:: Binomial distribution
* geometric:: Geometric distribution
* hypergeometric:: Hypergeometric distribution
* logarithmic:: Logarithmic distribution
* negativebinomial:: Negative Binomial distribution
* poisson:: Poisson distribution

   At the moment there are no CDFs implemented for discrete
distribution.  Thus `unur_distr_discr_upd_pmfsum' does not work
properly for truncated distribution.


File: unuran.info,  Node: binomial,  Next: geometric,  Up: Stddist_DISCR

7.3.1 `binomial'  -  Binomial distribution
------------------------------------------

PMF:
     (n \choose k) * p^k * (1-p)^(n-k)

constant:
     1

domain:
     0 <= k <= n

parameters 2 (2):  n, p
     No.     name                    default    
     `[0]'   n         >= 1                     (no. of elements)
     `[1]'   p         0 < p < 1                (shape)

reference:
     [JKKa92: Ch.3; p.105]

special generators:

    `DEF'
          Ratio of Uniforms/Inversion  [STa89]



File: unuran.info,  Node: geometric,  Next: hypergeometric,  Prev: binomial,  Up: Stddist_DISCR

7.3.2 `geometric'  -  Geometric distribution
--------------------------------------------

PMF:
     p * (1-p)^k

constant:
     1

domain:
     0 <= k < infinity

parameters 1 (1):  p
     No.     name                    default    
     `[0]'   p         0 < p < 1                (shape)

reference:
     [JKKa92: Ch.5.2; p.201]

special generators:

    `INV'
          Inversion method



File: unuran.info,  Node: hypergeometric,  Next: logarithmic,  Prev: geometric,  Up: Stddist_DISCR

7.3.3 `hypergeometric'  -  Hypergeometric distribution
------------------------------------------------------

PMF:
     (M \choose k) * (N-M \choose n-k) / (N \choose n)

constant:
     1

domain:
     max(0,n-N+M) <= k <= min(n,M)

parameters 3 (3):  N, M, n
     No.     name                    default    
     `[0]'   N         >= 1                     (no. of elements)
     `[1]'   M         1 <= M <= N              (shape)
     `[2]'   n         1 <= n <= N              (shape)

reference:
     [JKKa92: Ch.6; p.237]

special generators:

    `DEF'
          Ratio of Uniforms/Inversion  [STa89]



File: unuran.info,  Node: logarithmic,  Next: negativebinomial,  Prev: hypergeometric,  Up: Stddist_DISCR

7.3.4 `logarithmic'  -  Logarithmic distribution
------------------------------------------------

PMF:
     theta^k / k

constant:
     - log( 1.-theta);

domain:
     1 <= k < infinity

parameters 1 (1):  theta
     No.     name                    default    
     `[0]'   theta     0 < theta <              (shape)
                       1                        

reference:
     [JKKa92: Ch.7; p.285]

special generators:

    `DEF'
          Inversion/Transformation  [KAa81]



File: unuran.info,  Node: negativebinomial,  Next: poisson,  Prev: logarithmic,  Up: Stddist_DISCR

7.3.5 `negativebinomial'  -  Negative Binomial distribution
-----------------------------------------------------------

PMF:
     (k+r-1 \choose r-1) * p^r * (1-p)^k

constant:
     1

domain:
     0 <= k < infinity

parameters 2 (2):  p, r
     No.     name                    default    
     `[0]'   p         0 < p < 1                (shape)
     `[1]'   r         > 0                      (shape)

reference:
     [JKKa92: Ch.5.1; p.200]



File: unuran.info,  Node: poisson,  Prev: negativebinomial,  Up: Stddist_DISCR

7.3.6 `poisson'  -  Poisson distribution
----------------------------------------

PMF:
     theta^k / k!

constant:
     exp(theta)

domain:
     0 <= k < infinity

parameters 1 (1):  theta
     No.     name                    default    
     `[0]'   theta     > 0                      (shape)

reference:
     [JKKa92: Ch.4; p.151]

special generators:

    `DEF'
          Tabulated Inversion combined with Acceptance Complement
          [ADb82]

    `2'
          Tabulated Inversion combined with Patchwork Rejection  [ZHa94]



File: unuran.info,  Node: Stddist_MATR,  Prev: Stddist_DISCR,  Up: Stddist

7.4 UNU.RAN Library of random matrices
======================================

* Menu:

* correlation:: Random correlation matrix


File: unuran.info,  Node: correlation,  Up: Stddist_MATR

7.4.1 `correlation'  -  Random correlation matrix
-------------------------------------------------


   `UNUR_DISTR *unur_distr_correlation( int n )' creates a distribution
object for a random correlation matrix of N rows and columns. It can be
used with method MCORR (*note Random Correlation Matrix: MCORR.) to
generate random correlation matrices of the given size.


File: unuran.info,  Node: Error_Debug,  Next: Testing,  Prev: Stddist,  Up: Top

8 Error handling and Debugging
******************************

* Menu:

* Output_streams:: Output streams
* Debug:: Debugging
* Error_reporting:: Error reporting
* Errno:: Error codes
* Error_handlers:: Error handlers

   UNU.RAN routines report an error whenever they cannot perform the
requested task. Additionally it is possible to get information about
the generated distribution of generator objects for debugging purposes.
However, the latter must be enabled when compiling and installing the
library. (It is disabled by default.)  This chapter describes all
necessary details:

   * Choose an output stream to for writing the requested information.

   * Select a debugging level.

   * Select an error handler.

   * Write your own error handler.

   * Get more information for a particular error code.


File: unuran.info,  Node: Output_streams,  Next: Debug,  Up: Error_Debug

8.1 Output streams
==================

UNU.RAN uses a logfile for writing all error messages, warnings, and
debugging information onto an output stream. This stream can be set at
runtime by the `unur_set_stream' call.  If no such stream is given by
the user a default stream is used by the library: all messages are
written into the file `unuran.log' in the current working directory.
The name of this logfile is defined by the macro `UNUR_LOG_FILE' in
`unuran_config.h'.  (If UNU.RAN fails to open this file for writing,
`stderr' is used instead.)

   To destinguish between messages for different objects each of these
has its own identifier which is composed by the name of the
distribution obejct and generator type, resp., followed by a dot and
three digits.  (If there are more than 999 generators then the
identifiers are not unique.)

   _Remark:_ Writting debugging information must be switched on at
compile time using the configure flag `--enable-logging', see *note
Debugging: Debug.

Function reference
------------------

 -- Function: FILE* unur_set_stream (FILE* NEW_STREAM)
     This function sets a new file handler for the output stream,
     NEW_STREAM, for the UNU.RAN library routines. The previous handler
     is returned (so that you can restore it later).  Note that the
     pointer to a user defined file handler is stored in a static
     variable, so there can be only one output stream handler per
     program. This function should be not be used in multi-threaded
     programs except to set up a program-wide error handler from a
     master thread.

     The `NULL' pointer is not allowed.  (If you want to disable
     logging of debugging information use
     unur_set_default_debug(UNUR_DEBUG_OFF) instead.  If you want to
     disable error messages at all use `unur_set_error_handler_off'.  )

 -- Function: FILE* unur_get_stream (void)
     Get the file handle for the current output stream. It can be used
     to allow applications to write additional information into the
     logfile.


File: unuran.info,  Node: Debug,  Next: Error_reporting,  Prev: Output_streams,  Up: Error_Debug

8.2 Debugging
=============

The UNU.RAN library has several debugging levels which can be switched
on/off by debugging flags. This debugging feature must be enabled when
building the library using the `--enable-logging' configure flag.

   The debugging levels range from print a short description of the
created generator object to a detailed description of hat functions and
tracing the sampling routines. The output is printed onto the debugging
output stream (*note Output streams: Output_streams.).

   The debugging flags can be set or changed by the respective calls
`unur_set_debug' and `unur_chg_debug' independently for each generator.

   By default flag `UNUR_DEBUG_INIT' (see below) is used. This default
flags is set by the macro `UNUR_DEBUGFLAG_DEFAULT' in `unuran_config.h'
and can be changed at runtime by a `unur_set_default_debug' call.

   Off course these debugging flags depend on the chosen method. Since
most of these are merely for debugging the library itself, a
description of the flags are given in the corresponding source files of
the method.  Nevertheless, the following flags can be used with all
methods.

   Common debug flags:

`UNUR_DEBUG_OFF'
     switch off all debuging information

`UNUR_DEBUG_ALL'
     all avaivable information

`UNUR_DEBUG_INIT'
     parameters of generator object after initialization

`UNUR_DEBUG_SETUP'
     data created at setup

`UNUR_DEBUG_ADAPT'
     data created during adaptive steps

`UNUR_DEBUG_SAMPLE'
     trace sampling

   Notice that these are flags which could be combined using the `|'
operator.

   Almost all routines check a given pointer before they read from or
write to the given address. This does not hold for time-critical
routines like all sampling routines. Thus you are responsible for
checking a pointer that is returned from a `unur_init' call.  However,
it is possible to turn on checking for invalid `NULL' pointers even in
such time-critical routines by building the library using the
`--enable-check-struct' configure flag.

   Another debugging tool used in the library are magic cookies that
validate a given pointer. It produces an error whenever a given pointer
points to an object that is invalid in the context.  The usage of magic
cookies is also switched on by the `--enable-check-struct' configure
flag.

Function reference
------------------

 -- Function: int unur_set_debug (UNUR_PAR* PARAMETERS, unsigned DEBUG)
     Set debugging flags for generator.

 -- Function: int unur_chg_debug (UNUR_GEN* GENERATOR, unsigned DEBUG)
     Change debugging flags for generator.

 -- Function: int unur_set_default_debug (unsigned DEBUG)
     Change default debugging flag.


File: unuran.info,  Node: Error_reporting,  Next: Errno,  Prev: Debug,  Up: Error_Debug

8.3 Error reporting
===================

UNU.RAN routines report an error whenever they cannot perform the
requested task. For example, applying transformed density rejection to
a distribution that violates the T-concavity condition, or trying to
set a parameter that is out of range, result in an error message.  It
might also happen that the setup fails for transformed density
rejection for a T-concave distribution with some extreme density
function simply because of round-off errors that makes the generation
of a hat function numerically impossible.  Situations like this may
happen when using black box algorithms and you should check the return
values of all routines.

   All `..._set_...', and `..._chg_...' calls return `UNUR_SUCCESS' if
they could be executed successfully. Otherwise, some error codes are
returned if it was not possible to set or change the desired parameters,
e.g. because the given values are out of range, or simply because the
set call does not work for the chosen method.

   All routines that return a pointer to the requested object will
return a `NULL' pointer in case of error.  (Thus you should always
check the pointer to avoid possible segmentation faults. Sampling
routines usually do not check the given pointer to the generator
object.)

   The library distinguishes between two major classes of error:

_(fatal) errors:_
     The library was not able to construct the requested object.

_warnings:_
     Some problems encounters while constructing a generator object.
     The routine has tried to solve the problem but the resulting
     object might not be what you want. For example, chosing a special
     variant of a method does not work and the initialization routine
     might switch to another variant. Then the generator produces random
     variates of the requested distribution but correlation induction
     is not possible. However, it also might happen that changing the
     domain of a distribution has failed. Then the generator produced
     random variates with too large/too small range, i.e. their
     distribution is not correct.

   It is obvious from the example that this distinction between errors
and warning is rather crude and sometimes arbitrary.

   UNU.RAN routines use the global variable UNUR_ERRNO to report
errors, completely analogously to ERRNO in the ANSI C standard library.
(However this approach is not thread-safe. There can be only one
instance of a global variable per program. Different threads of
execution may overwrite UNUR_ERRNO simultaneously).  Thus when an error
occurs the caller of the routine can examine the error code in
UNUR_ERRNO to get more details about the reason why a routine failed.
You get a short description of the error by a `unur_get_strerror' call.
All the error code numbers have prefix `UNUR_ERR_' and expand to
non-zero constant unsigned integer values.  Error codes are divided
into six main groups, see *note Error codes: Errno.

   Alternatively, the variable UNUR_ERRNO can also read by a
`unur_get_errno' call and can be reset by the `unur_reset_errno' call
(this is in particular required for the Windows version of the library).

   Additionally, there exists a error handler (*note Error handlers:
Error_handlers.) that is invoked in case of an error.

   In addition to reporting errors by setting error codes in
UNUR_ERRNO, the library also has an error handler function. This
function is called by other library functions when they report an
error, just before they return to the caller (*note Error handlers:
Error_handlers.).  The default behavior of the error handler is to
print a short message:

     AROU.004: [error] arou.c:1500 - (generator) condition for method violated:
     AROU.004: ..>  PDF not unimodal

   The purpose of the error handler is to provide a function where a
breakpoint can be set that will catch library errors when running under
the debugger. It is not intended for use in production programs, which
should handle any errors using the return codes.

Function reference
------------------

 -- Variable: extern int unur_errno
     Global variable for reporting diagnostics of error.

 -- Function: int unur_get_errno (void)
     Get current value of global variable UNUR_ERRNO.

 -- Function: void unur_reset_errno (void)
     Reset global variable UNUR_ERRNO to `UNUR_SUCCESS' (i.e., no
     errors occured).

 -- Function: const char* unur_get_strerror (const INT ERRNOCODE)
     Get a short description for error code value.


File: unuran.info,  Node: Errno,  Next: Error_handlers,  Prev: Error_reporting,  Up: Error_Debug

8.4 Error codes
===============

List of error codes
...................

   * Procedure executed successfully (no error)
    `UNUR_SUCCESS (0x0u)'
          success (no error)

   * Errors that occurred while handling distribution objects.
    `UNUR_ERR_DISTR_SET'
          set failed (invalid parameter).

    `UNUR_ERR_DISTR_GET'
          get failed (parameter not set).

    `UNUR_ERR_DISTR_NPARAMS'
          invalid number of parameters.

    `UNUR_ERR_DISTR_DOMAIN'
          parameter(s) out of domain.

    `UNUR_ERR_DISTR_GEN'
          invalid variant for special generator.

    `UNUR_ERR_DISTR_REQUIRED'
          incomplete distribution object, entry missing.

    `UNUR_ERR_DISTR_UNKNOWN'
          unknown distribution, cannot handle.

    `UNUR_ERR_DISTR_INVALID'
          invalid distribution object.

    `UNUR_ERR_DISTR_DATA'
          data are missing.

    `UNUR_ERR_DISTR_PROP'
          desired property does not exist

   * Errors that occurred while handling parameter objects.
    `UNUR_ERR_PAR_SET'
          set failed (invalid parameter)

    `UNUR_ERR_PAR_VARIANT'
          invalid variant -> using default

    `UNUR_ERR_PAR_INVALID'
          invalid parameter object

   * Errors that occurred while handling generator objects.
    `UNUR_ERR_GEN'
          error with generator object.

    `UNUR_ERR_GEN_DATA'
          (possibly) invalid data.

    `UNUR_ERR_GEN_CONDITION'
          condition for method violated.

    `UNUR_ERR_GEN_INVALID'
          invalid generator object.

    `UNUR_ERR_GEN_SAMPLING'
          sampling error.

    `UNUR_ERR_NO_REINIT'
          reinit routine not implemented.

    `UNUR_ERR_NO_QUANTILE'
          quantile routine not implemented.

   * Errors that occurred while handling URNG objects.
    `UNUR_ERR_URNG'
          generic error with URNG object.

    `UNUR_ERR_URNG_MISS'
          missing functionality.

   * Errors that occurred while parsing strings.
    `UNUR_ERR_STR'
          error in string.

    `UNUR_ERR_STR_UNKNOWN'
          unknown keyword.

    `UNUR_ERR_STR_SYNTAX'
          syntax error.

    `UNUR_ERR_STR_INVALID'
          invalid parameter.

    `UNUR_ERR_FSTR_SYNTAX'
          syntax error in function string.

    `UNUR_ERR_FSTR_DERIV'
          cannot derivate function.

   * Other run time errors.
    `UNUR_ERR_DOMAIN'
          argument out of domain.

    `UNUR_ERR_ROUNDOFF'
          (serious) round-off error.

    `UNUR_ERR_MALLOC'
          virtual memory exhausted.

    `UNUR_ERR_NULL'
          invalid `NULL' pointer.

    `UNUR_ERR_COOKIE'
          invalid cookie.

    `UNUR_ERR_GENERIC'
          generic error.

    `UNUR_ERR_SILENT'
          silent error (no error message).

    `UNUR_ERR_INF'
          infinity occured.

    `UNUR_ERR_NAN'
          NaN occured.

    `UNUR_ERR_COMPILE'
          Requested routine requires different compilation switches.
          Recompilation of library necessary.

    `UNUR_ERR_SHOULD_NOT_HAPPEN'
          Internal error, that should not happen.  Please report this
          bug!



File: unuran.info,  Node: Error_handlers,  Prev: Errno,  Up: Error_Debug

8.5 Error handlers
==================

The default behavior of the UNU.RAN error handler is to print a short
message onto the output stream, usually a logfile (*note Output
streams: Output_streams.), e.g.,

     AROU.004: [error] arou.c:1500 - (generator) condition for method violated:
     AROU.004: ..>  PDF not unimodal

   This error handler can be switched off using the
`unur_set_error_handler_off' call, or replace it by a new one.  Thus it
allows to set a breakpoint that will catch library errors when running
under the debugger. It also can be used to redirect error messages when
UNU.RAN is included in general purpose libraries or in interactive
programming environments.

 -- Data Type: UNUR_ERROR_HANDLER
     This is the type of UNU.RAN error handler functions. An error
     handler will be passed six arguments which specify the identifier
     of the object where the error occured (a string), the name of the
     source file in which it occurred (also a string), the line number
     in that file (an integer), the type of error (a string: `"error"'
     or `"warning"'), the error number (an integert), and the reason
     for the error (a string).  The source file and line number are set
     at compile time using the `__FILE__' and `__LINE__' directives in
     the preprocessor.  The error number can be translated into a short
     description using a `unur_get_strerror' call.  An error handler
     function returns type `void'.

     Error handler functions should be defined like this,
          void my_handler(
                     const char *objid,
                     const char *file,
                     int line,
                     const char *errortype,
                     int unur_errno,
                     const char *reason )

   To request the use of your own error handler you need the call
`unur_set_error_handler'.

Function reference
------------------

 -- Function: UNUR_ERROR_HANDLER* unur_set_error_handler
          (UNUR_ERROR_HANDLER* NEW_HANDLER)
     This function sets a new error handler, NEW_HANDLER, for the
     UNU.RAN library routines. The previous handler is returned (so
     that you can restore it later). Note that the pointer to a user
     defined error handler function is stored in a static variable, so
     there can be only one error handler per program. This function
     should be not be used in multi-threaded programs except to set up a
     program-wide error handler from a master thread.

     To use the default behavior set the error handler to `NULL'.

 -- Function: UNUR_ERROR_HANDLER* unur_set_error_handler_off (void)
     This function turns off the error handler by defining an error
     handler which does nothing (except of setting UNUR_ERRNO.  The
     previous handler is returned (so that you can restore it later).


File: unuran.info,  Node: Testing,  Next: Misc,  Prev: Error_Debug,  Up: Top

9 Testing
*********

The following routines can be used to test the performance of the
implemented generators and can be used to verify the implementions.
They are declared in `unuran_tests.h' which has to be included.

Function reference
------------------

 -- Function: void unur_run_tests (UNUR_PAR* PARAMETERS, unsigned
          TESTS, FILE* OUT)
     Run a battery of tests.  The following tests are available (use
     `|' to combine these tests):
    `UNUR_TEST_ALL'
          run all possible tests.

    `UNUR_TEST_TIME'
          estimate generation times.

    `UNUR_TEST_N_URNG'
          count number of uniform random numbers

    `UNUR_TEST_N_PDF'
          count number of PDF calls

    `UNUR_TEST_CHI2'
          run chi^2 test for goodness of fit

    `UNUR_TEST_SAMPLE'
          print a small sample.
     All these tests can be started individually (see below).

 -- Function: void unur_test_printsample (UNUR_GEN* GENERATOR, int
          N_ROWS, int N_COLS, FILE* OUT)
     Print a small sample with N_ROWS rows and N_COLS columns.  OUT is
     the output stream to which all results are written.

 -- Function: UNUR_GEN* unur_test_timing (UNUR_PAR* PARAMETERS, int
          LOG10_SAMPLESIZE, double* TIME_SETUP, double* TIME_SAMPLE,
          int VERBOSITY, FILE* OUT)
     Timing. PARAMETERS is an parameter object for which setup time and
     marginal generation times have to be measured. The results are
     written into TIME_SETUP and TIME_SAMPLE, respectively.
     LOG10_SAMPLESIZE is the common logarithm of the sample size that
     is used for timing.

     If VERBOSITY is `TRUE' then a small table is printed to output
     stream OUT with setup time, marginal generation time and average
     generation times for generating 10, 100, ... random variates. All
     times are given in micro seconds and relative to the generation
     times for the underlying uniform random number (using the UNIF
     interface) and an exponential distributed random variate using the
     inversion method.

     The created generator object is returned.  If a generator object
     could not be created successfully, then `NULL' is returned.

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

     Notice: All timing results are subject to heavy changes. Reruning
     timings usually results in different results. Minor changes in the
     source code can cause changes in such timings up to 25 percent.

 -- Function: double unur_test_timing_R (UNUR_PAR* PARAMETERS, const
          CHAR* DISTRSTR, const CHAR* METHODSTR, double
          LOG10_SAMPLESIZE, double* TIME_SETUP, double* TIME_MARGINAL)
     Timing. PARAMETERS is an parameter object for which setup time and
     marginal generation times have to be measured. The results are
     written into TIME_SETUP and TIME_MARGINAL, respectively.
     LOG10_SAMPLESIZE is the common logarithm of the sample size that
     is used for timing.

     Alternatively, one could provide the "parameter object" using
     strings DISTRSTR and METHODSTR as used for `unur_makegen_ssu'.
     The results are more accurate than those of function
     `unur_test_timing' as the timings are computed using linear
     regression with several timings for sample size 1 and
     10^LOG10_SAMPLESIZE.  For each sample size total generation time
     (including setup) is measured 10 times. Since the these timings
     can be influenced by external effects (like disc sync or handling
     of interupts) the 2 fastest and the 3 slowest timings are
     discarded.  Intercept and slope for simple linear regression are
     than stored and R^2 is returned.

     In case of an error `-100.' is returned.

     Notice: All timing results are subject to heavy changes. Reruning
     timings usually results in different results. Minor changes in the
     source code can cause changes in such timings up to 25 percent.

 -- Function: double unur_test_timing_uniform (const UNUR_PAR*
          PARAMETERS, int LOG10_SAMPLESIZE)
 -- Function: double unur_test_timing_exponential (const UNUR_PAR*
          PARAMETERS, int LOG10_SAMPLESIZE)
     Marginal generation times for the underlying uniform random number
     (using the UNIF interface) and an exponential distributed random
     variate using the inversion method. These times are used in
     `unur_test_timing' to compute the relative timings results.

 -- Function: double unur_test_timing_total (const UNUR_PAR*
          PARAMETERS, int SAMPLESIZE, double AVG_DURATION)
     Timing. PARAMETERS is an parameter object for which average times
     a sample of size SAMPLESIZE (including setup) are estimated. Thus
     sampling is repeated and the median of these timings is returned
     (in micro seconds). The number of iterations is computed
     automatically such that the total amount of time necessary for the
     test ist approximately AVG_DURATION (given in seconds).  However,
     for very slow generator with expensive setup time the time
     necessary for this test may be (much) larger.

     If an error occurs then `-1' is returned.

     Notice: All timing results are subject to heavy changes. Reruning
     timings usually results in different results. Minor changes in the
     source code can cause changes in such timings up to 25 percent.

 -- Function: int unur_test_count_urn (UNUR_GEN* GENERATOR, int
          SAMPLESIZE, int VERBOSITY, FILE* OUT)
     Count used uniform random numbers. It returns the total number of
     uniform random numbers required for a sample of non-uniform random
     variates of size SAMPLESIZE. In case of an error `-1' is returned.

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

     _Notice:_ This test uses global variables to store counters. Thus
     it is not thread save.

 -- Function: int unur_test_count_pdf (UNUR_GEN* GENERATOR, int
          SAMPLESIZE, int VERBOSITY, FILE* OUT)
     Count evaluations of PDF and similar functions. It returns the
     total number of evaluations of all such functions required for a
     sample of non-uniform random variates of size SAMPLESIZE.  If
     VERBOSITY is `TRUE' then a more detailed report is printed to the
     output stream OUT.  In case of an error `-1' is returned.  This
     test is run on a copy of the given generator object.

     _Notice:_ The printed numbers of evaluation should be interpreted
     with care. For example, methods either use the PDF or the logPDF;
     if only the logPDF is given, but a method needs the PDF then both
     the logPDF and the PDF (a wrapper around the logPDF) are called and
     thus one call to the PDF is counted twice.

     _Notice:_ This test uses global variables to store function
     pointers and counters. Thus it is not thread save.

 -- Function: int unur_test_par_count_pdf (UNUR_PAR* PARAMETERS, int
          SAMPLESIZE, int VERBOSITY, FILE* OUT)
     Same as `unur_test_count_pdf' except that it is run on a parameter
     object. Thus it also prints the number of function evaluations for
     the setup. The temporary created generator object is destroyed
     before the results are returned.

 -- Function: double unur_test_chi2 (UNUR_GEN* GENERATOR, int
          INTERVALS, int SAMPLESIZE, int CLASSMIN, int VERBOSITY, FILE*
          OUT)
     Run a Chi^2 test with the GENERATOR.  The resulting p-value is
     returned.

     It works with discrete und continuous univariate distributions.
     For the latter the CDF of the distribution is required.

     INTERVALS is the number of intervals that is used for continuous
     univariate distributions. SAMPLESIZE is the size of the sample
     that is used for testing. If it is set to `0' then a sample of
     size INTERVALS^2 is used (bounded to some upper bound).

     CLASSMIN is the minimum number of expected entries per class. If a
     class has to few entries then some classes are joined.

     VERBOSITY controls the output of the routine. If it is set to `1'
     then the result is written to the output stream OUT. If it is set
     to `2' additionally the list of expected and observed data is
     printed.  If it is set to `3' then all generated numbers are
     printed.  There is no output when it is set to `0'.

     _Notice:_ For multivariate distributions the generated points are
     transformed by the inverse of the Cholesky factor of the
     covariance matrix and the mean vectors (if given for the underlying
     distribution). The marginal distributions of the transformed
     vectors are then tested against the marginal distribution given by
     a `unur_distr_cvec_set_marginals' or
     `unur_distr_cvec_set_marginal_array' call.  (Notice that these
     marginal distributions are never set by default for any of the
     distributions provided by UNU.RAN.)  Then the Bonferroni corrected
     p-value of all these tests is returned.  However, the test may not
     be performed correctly if the domain of the underlying
     distribution is truncated by a `unur_distr_cvec_set_domain_rect'
     call and the components of the distribution are correlated (i.e.
     `unur_distr_cvec_set_covar' is called with the non-NULL argument).
     Then it almost surely will fail.

 -- Function: int unur_test_moments (UNUR_GEN* GENERATOR, double*
          MOMENTS, int N_MOMENTS, int SAMPLESIZE, int VERBOSITY, FILE*
          OUT)
     Computes the first N_MOMENTS central moments for a sample of size
     SAMPLESIZE. The result is stored into the array MOMENTS.
     N_MOMENTS must be an integer between `1' and `4'.  For
     multivariate distributions the moments are stored consecutively
     for each dimension and the provided MOMENTS-array must have a
     length of at least (N_MOMENTS+1) * DIM, where DIM is the dimension
     of the multivariate distribution.  The M'th moment for the D'th
     dimension (0<=D<DIM) is thus stored in the array element
     MOMENTS[D*N_MOMENTS+M]

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

 -- Function: double unur_test_correlation (UNUR_GEN* GENERATOR1,
          UNUR_GEN* GENERATOR2, int SAMPLESIZE, int VERBOSITY, FILE*
          OUT)
     Compute the correlation coefficient between streams from
     GENERATOR1 and GENERATOR2 for two samples of size SAMPLESIZE.  The
     resultung correlation is returned.

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

 -- Function: int unur_test_quartiles (UNUR_GEN* GENERATOR, double* Q0,
          double* Q1, double* Q2, double* Q3, double* Q4, int
          SAMPLESIZE, int VERBOSITY, FILE* OUT)
     Estimate quartiles of sample of size SAMPLESIZE.  The resulting
     quantiles are stored in the variables Q:
    Q0
          minimum

    Q1
          25%

    Q2
          median (50%)

    Q3
          75%

    Q4
          maximum

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

 -- Function: double unur_test_u_error (const UNUR_GEN* GENERATOR,
          double* MAX_ERROR, double* MAE, double THRESHOLD, int
          SAMPLESIZE, int RANDOMIZED, int TESTTAILS, int VERBOSITY,
          FILE* OUT)
     Estimate U-error of an inversion method, i.e.  error = |
     CDF^(-1)(U) - U | , by means of a simple Monte Carlo method.
     Maximum and mean absolute errors are stored in MAX_ERROR and MAE,
     respectively.  The particular computed U-errors should not exceed
     the given THRESHOLD. However, approximization and round-off errors
     might occasionally trigger such an event.  Thus the function
     returns a penalty score. It is `0.' when the U-error never exceed
     the THRESHOLD value. It roughly gives the portion of particular
     test points where the U-error is too larger.  However, each such
     event is weighted with 1 + 10 x(uerror - threshold) / threshold .

     If RANDOMIZED is `TRUE' a pseudo-random sequence is used for the
     estimation.

     If RANDOMIZED is `FALSE' then the U-values are choosen
     equidistributed.  If in addition RANDOMIZED is set to `TRUE' then
     the tails of the distributions are tested with a more dense set of
     points.

     If VERBOSITY is `TRUE' the result is written to the output stream
     OUT.

     When the domain of the distribution is truncated then the u-error
     might be larger due to rescaling of floating point numbers. Thus
     the observed u-errors are corrected by the corresponding rescaling
     factor.

     The test also works for discrete distributions albeit with some
     restrictions: It does not work correctly with truncated
     distributions and the TESTTAILS flag is ignored.  Moreover, the
     value stored in MAE is rather useless.

     In case of an error a negative value is returned.


File: unuran.info,  Node: Misc,  Next: RVG,  Prev: Testing,  Up: Top

10 Miscelleanous
****************

* Menu:

* Math:: Mathematics


File: unuran.info,  Node: Math,  Up: Misc

10.1 Mathematics
================

The following macros have been defined

`UNUR_INFINITY'
     indicates infinity for floating point numbers (of type `double').
     Internally `HUGE_VAL' is used.

`INT_MAX'
`INT_MIN'
     indicate infinity and minus infinity, resp., for integers (defined
     by ISO C standard).

``TRUE''
``FALSE''
     bolean expression for return values of `set' functions.


File: unuran.info,  Node: RVG,  Next: Glossary,  Prev: Misc,  Up: Top

Appendix A A Short Introduction to Random Variate Generation
************************************************************

* Menu:

* Inversion:: The Inversion Method
* Rejection:: The Rejection Method
* Composition:: The Composition Method
* Ratio-of-Uniforms:: The Ratio-of-Uniforms Method
* DiscreteInversion:: Inversion for Discrete Distributions
* IndexedSearch:: Indexed Search (Guide Table Method)

   Random variate generation is the small field of research that deals
with algorithms to generate random variates from various distributions.
It is common to assume that a uniform random number generator is
available. This is a program that produces a sequence of independent
and identically  distributed continuous U(0,1) random variates (i.e.
uniform random variates on the interval (0,1) ). Of course real world
computers can never generate ideal random numbers and they cannot
produce numbers of arbitrary precision but state-of-the-art uniform
random number generators come close to this aim. Thus random variate
generation deals with the problem of transforming such a sequence of
U(0,1) random numbers into non-uniform random variates.

   Here we shortly explain the basic ideas of the _inversion_,
_rejection_, and the _ratio of uniforms_ method. How these ideas can be
used to design a particular automatic random variate generation
algorithms that can be applied to large classes of distributions is
shortly explained in the description of the different methods included
in this manual.

   For a deeper treatment of the ideas presented here, for other basic
methods and for automatic generators we refer the interested reader to
our book [HLD04].


File: unuran.info,  Node: Inversion,  Next: Rejection,  Up: RVG

A.1 The Inversion Method
========================

When the inverse F^(-1) of the cumulative distribution function is
known, then random variate generation is easy.  We just generate a
uniformly U(0,1) distributed random number U and return

     X=F^(-1)(U).

The following figure shows how the inversion method works for the
exponential distribution.



[image src="figures/inversion.png" text="
  ^
1 +
  |                                                     ***************
  +--------------------------------------***************
  |                               *******  |
  |                          *****         |
  |                       ***              |
  |                    ***                 |
  |                  **                    |
  |                **                      |
  |              **                        |
  |             *                          |
  |           **                           |
  |          *                             |
  |         *                              |
  |        *                               |
  |       *                                |
  +------*                                 |
  |     *|                                 |
  |    * |                                 |
  |   *  |                                 |
  |   *  |                                 |
  |  *   |                                 |
  |  *   |                                 |
  | *    |                                 |
  |*     |                                 |
  |      V                                 V
  +------+------+-------------+------------++-------------+-------------+--->
  0             1             2             3             4             5
"]


   This algorithm is so simple that inversion is certainly the method
of choice if the inverse CDF is available in closed form. This is the
case e.g. for the exponential and the Cauchy distribution.

   The inversion method also has other special advantages that make it
even more attractive for simulation purposes.  It preserves the
structural properties of the underlying uniform pseudo-random number
generator.  Consequently it can be used, e.g., for variance reduction
techniques, it is easy to sample from truncated distributions, from
marginal distributions, and from order statistics.  Moreover, the
quality of the generated random variables depends only on the
underlying uniform (pseudo-) random number generator.  Another
important advantage of the inversion method is that we can easily
characterize its performance. To generate one random variate we always
need exactly one uniform variate and one evaluation of the inverse CDF.
So its speed mainly depends on the costs for evaluating the inverse
CDF. Hence inversion is often considered as the method of choice in the
simulation literature.

   Unfortunately computing the inverse CDF is, for many important
standard distributions (e.g. for normal, student, gamma, and
beta-distributions), comparatively difficult and slow. Often no such
routines are available in standard programming libraries.  Then
numerical methods for inverting the CDF are necessary, e.g.  Newton's
method or (polynomial or rational) approximations of the inverse CDF.
Such procedures, however, have the disadvantage that they are not exact
and/or slow.  UNU.RAN implements several methods: NINV (*note NINV::),
HINV (*note HINV::) and PINV (*note PINV::).

   For such approximate inversion methods the approximation error is
important for the quality of the generated point set.  Let X=G^(-1)(U)
denote the approximate inverse CDF, and let F and F^(-1) be the exact
CDF and inverse CDF of the distribution, resp.  There are three
measures for the approximation error:

_u-error_
     is given by

          uerror = |U-F(G^(-1)(U))|

     Goodness-of-fit tests like the Kolmogorov-Smirnov test or the
     chi-squared test look at this type of error.  We are also
     convinced that it is the most suitable error measure for Monte
     Carlo simulations as pseudo-random numbers and points of low
     discrepancy sets are located on a grid of restricted resolution.

_x-error_
     is given by

          absolute xerror = |F^(-1)(U)-G^(-1)(U)|


          relative xerror = |F^(-1)(U)-G^(-1)(U)| * |F^(-1)(U)|

     The x-error measure the deviation of G^(-1)(U) from the exact
     result. This measure is suitable when the inverse CDF is used as a
     quantile function in some computations.  The main problem with the
     x-error is that we have to use the _absolute x-error_ for
     X=F^(-1)(U) close to zero and the _relative x-error_ in the tails.


   We use the terms _u-resolution_ and _x-resolution_ as the maximal
tolerated u-error and x-error, resp.

   UNU.RAN allows to set u-resolution and x-resolution independently.
Both requirements must be fulfilled.  We use the following strategy for
checking whether the precision goal is reached:

_checking u-error:_
     The u-error must be slightly smaller than the given u-resolution:

          |U-F(G^(-1)(U))| < 0.9 * uresolution.

     There is no necessity to consinder the relative u-error as we have
     0 < U < 1.

_checking x-error:_
     We combine absoute and relative x-error and use the criterion

          |F^(-1)(U)-G^(-1)(U)| < xresolution * (|G^(-1)(U)| +
          xresolution).



   *Remark:* It should be noted here that the criterion based on the
u-error is too stringent whereever the CDF is extremely steep (and thus
the PDF has a pole or a high and narrow peak). This is in particular a
problem for distributions with a pole (e.g., the gamma distribution
with shape parameter less than 0.5).  On the other hand using a
criterion based on the x-error causes problems whereever the CDF is
extremly flat. This is in particular the case in the (far) tails of
heavy-tailed distributions (e.g., for the Cauchy distribution).


File: unuran.info,  Node: Rejection,  Next: Composition,  Prev: Inversion,  Up: RVG

A.2 The Rejection Method
========================

The rejection method, often called _acceptance-rejection method_, has
been suggested by John von Neumann in 1951.  Since then it has proven
to be the most flexible and most efficient method to generate variates
from continuous distributions.

   We explain the rejection principle first for the density f(x) =
sin(x)/2 on the interval (0, pi).  To generate random variates from
this distribution we also can sample random points that are uniformly
distributed in the region between the graph of f(x) and the x-axis,
i.e., the shaded region in the below figure.


[image src="figures/rejection_from_constant_hat.png" text="
    ^
    |
    +------------------------------**+***------------------------------+
    |                         o****./.\\..****            o             |
    |                        **..../...\\.....**                        |
    |                      **...../.....\\......**                      |
    |                    **...../.........\\......**                    |
    |                   *....../...........\\.......*                o  |
    |       o          *....../..............\\......*                  |
    |                **...../......X..........\\......**                |
    |               *....../...................\\.......*    o          |
    |              *....../......................\\......*              |
    |             *...../.........................\\......*             |
    |            *..X../...........................\\......*            |
    |           *...../..................X...........\\.....*           |
    |          *..../.................................\\.....*          |
    |         *..../.................................X..\\....*    o    |
    |        *..../........X.............................\\....*        |
    |       *.../.................................X.......\\....*       |
    |      *.../............................................\\...*      |
    |     *.../....................................X.........\\...*     |
    |    *../...........................X.....................\\...*    |
    |    *./............X.......................................\\..*   |
    | o *./......................................................\\.*   |
    |  */.........................................................\\.*  |
    | */.....................................................X......\\* |
    |*/......................................X.......................\\*|
    *---------------+---+--+-------+----++---+----++-+-------+---------*---->

"]

   In general this is not a trivial task but in this example we can
easily use the rejection trick: Sample a random point (X,Y) uniformly
in the bounding rectangle (0, pi)x(0,0.5).  This is easy since each
coordinate can be sampled independently from the respective uniform
distributions U(0, pi) and U(0,0.5).  Whenever the point falls into the
shaded region below the graph (indicated by dots in the figure), i.e.,
when Y < sin(X)/2, we accept it and return X as a random variate from
the distribution with density f(x).  Otherwise we have to reject the
point (indicated by small circles in the figure), and try again.

   It is quite clear that this idea works for every distribution with a
bounded density on a bounded domain. Moreover, we can use this
procedure with any multiple of the density, i.e., with any positive
bounded function with bounded integral and it is not necessary to know
the integral of this function. So we use the term density in the sequel
for any positive function with bounded integral.

   From the figure we can conclude that the performance of a rejection
algorithm depends heavily on the area of the enveloping rectangle.
Moreover, the method does not work if the target distribution has
infinite tails (or is unbounded). Hence non-rectangular shaped regions
for the envelopes are important and we have to solve the problem of
sampling points uniformly from such domains. Looking again at the
example above we notice that the x-coordinate of the random point (X,Y)
was sampled by inversion from the uniform distribution on the domain of
the given density. This motivates us to replace the density of the
uniform distribution by the (multiple of a) density h(x) of some other
appropriate distribution. We only have to take care that it is chosen
such that it is always an upper bound, i.e., h(x) >= f(x) for all x in
the domain of the distribution. To generate the pair (X,Y) we generate X
from the distribution with density proportional to h(x) and Y uniformly
between 0 and h(X).  The first step (generate X ) is usually done by
inversion (*note Inversion::).

   Thus the general rejection algorithm for a hat h(x) with inverse CDF
H^(-1) consists of the following steps:
  1. Generate a U(0,1) random number U.

  2. Set X to H^(-1)(U).

  3. Generate a U(0,1) random number V.

  4. Set Y to V h(X).

  5. If Y <= f(X) accept X as the random variate.

  6. Else try again.

   If the evaluation of the density f(x) is expensive (i.e., time
consuming) it is possible to use a simple lower bound of the density as
so called _squeeze function_ s(x) (the triangular shaped function in
the above figure is an example for such a squeeze). We can then accept X
when Y <= s(X) and can thus often save the evaluation of the density.

   We have seen so far that the rejection principle leads to short and
simple generation algorithms. The main practical problem to apply the
rejection algorithm is the search for a good fitting hat function and
for squeezes. We do not discuss these topics here as they are the heart
of the different automatic algorithms implemented in UNU.RAN.
Information about the construction of hat and squeeze can therefore be
found in the descriptions of the methods.

   The performance characteristics of rejection algorithms mainly
depend on the fit of the hat and the squeeze. It is not difficult to
prove that:
   * The expected number of trials to generate one variate is the ratio
     between the area below the hat and the area below the density.

   * The expected number of evaluations of the density necessary to
     generate one variate is equal to the ratio between the area below
     the hat and the area below the density, when no squeeze is used.
     Otherwise, when a squeeze is given it is equal to the ratio
     between the area between hat and squeeze and the area below the
     hat.

   * The `sqhratio' (i.e., the ratio between the area below the squeeze
     and the area below the hat) used in some of the UNU.RAN methods is
     easy to compute. It is useful as its reciprocal is an upper bound
     for the expected number of trials of the rejection algoritm. The
     expected number of evaluations of the density is bounded by
     (1/sqhratio)-1.


File: unuran.info,  Node: Composition,  Next: Ratio-of-Uniforms,  Prev: Rejection,  Up: RVG

A.3 The Composition Method
==========================

The composition method is an important principle to facilitate and
speed up random variate generation. The basic idea is simple.  To
generate random variates with a given density we first split the domain
of the density into subintervals. Then we select one of these randomly
with probabilities given by the area below the density in the
respective subintervals. Finally we generate a random variate from the
density of the selected part by inversion and return it as random
variate of the full distribution.

   Composition can be combined with rejection. Thus it is possible to
decompose the domain of the distribution into subintervals and to
construct hat and squeeze functions seperatly in every subinterval. The
area below the hat must be determined in every subinterval. Then the
Composition rejection algorithm contains the following steps:

  1. Generate the index J of the subinterval as the realisation of a
     discrete random variate with probabilities proportional to the
     area below the hat.

  2. Generate a random variate X proportional to the hat in interval J.

  3. Generate the U(0,f(X)) random number Y.

  4. If Y <= f(X) accept X as random variate.

  5. Else start again with generating the index J.

   The first step can be done in constant time (i.e., independent of
the number of chosen subintervals) by means of the indexed search
method (*note IndexedSearch::).

   It is possible to reduce the number of uniform random numbers
required in the above algorithm by recycling the random numbers used in
Step 1 and additionally by applying the principle of _immediate
acceptance_.  For details see [HLD04: Sect. 3.1] .


File: unuran.info,  Node: Ratio-of-Uniforms,  Next: DiscreteInversion,  Prev: Composition,  Up: RVG

A.4 The Ratio-of-Uniforms Method
================================

The construction of an appropriate hat function for the given density
is the crucial step for constructing rejection algorithms.
Equivalently we can try to find an appropriate envelope for the region
between the graph of the density and the x-axis, such that we can
easily sample uniformly distributed random points.  This task could
become easier if we can find transformations that map the region
between the density and the axis into a region of more suitable shape
(for example into a bounded region).

   As a first example we consider the following simple algorithm for
the Cauchy distribution.
  1. Generate a U(-1,1) random number U and a U(0,1) random number V.

  2. If U^2 + V^2 <= 1 accept X=U/V as a Cauchy random variate.

  3. Else try again.

   It is possible to prove that the above algorithm indeed  generates
Cauchy random variates. The fundamental principle behind this algorithm
is the fact that the region below the density is mapped by the
transformation

     (X,Y) -> (U,V)=(2 Xsqrt(Y),2 sqrt(Y))

into a half-disc in such a way that the ratio between the area of the
image to the area of the preimage is constant. This is due to the fact
that that the Jacobian of this transformation is constant.


[image src="figures/rou-cauchy.png" text="
                                      ^ v
                                      |
                                      |
   +---------------------------*-***********-*---------------------------+
   |                      *****.......|.......*****                      |
   |                  ****............|............****                  |
   |                **................|................**                |
   |             **...................|...................**             |
   |            *.....................|.....................*            |
   |          *.......................|.......................*          |
   |         *........................|.........................*        |
   |       *..........................|..........................*       |
   |      *...........................|...........................*      |
   |     *............................|............................*     |
   |    *.............................|.............................*    |
   |   *..............................|..............................*   |
   |  *...............................|...............................*  |
   |  *...............................|................................* |
   | *................................|................................* |
   | *................................|................................* |
   |*.................................|.................................*|
   |*.................................|.................................*|
   *..................................|..................................*
   *..................................|..................................*
   *..................................|..................................*
---*----------------------------------+----------------------------------*--> u

"]

   The above example is a special case of a more general principle,
called the _Ratio-of-uniforms (RoU) method_. It is based on the fact
that for a random variable X with density f(x) and some constant mu we
can generate X from the desired density by calculating X=U/V+ mu for a
pair (U,V) uniformly distributed in the set

     A_f= { (u,v) : 0 < v <= sqrt(f(u/v+ mu)) } .

For most distributions it is best to set the constant mu equal to the
mode of the distribution. For sampling random points uniformly
distributed in A_f rejection from a convenient enveloping region is
used, usually the minimal bounding rectangle, i.e., the smallest
possible rectangle that contains A_f (see the above figure).  It is
given by (u^-,u^+)x(0,v^+) where

     v^+ = sup_(b_l<x<b_r) sqrt(f(x)),
     u^- = inf_(b_l<x<b_r) (x- mu) sqrt(f(x)),
     u^+ = sup_(b_l<x<b_r) (x- mu) sqrt(f(x)).

Then the ratio-of-uniforms method consists of the following simple
steps:
  1. Generate a U(u^-,u^+) random number U and a U(0,v^+) random number
     V.

  2. Set X to U/V+ mu.

  3. If V^2 <= f(X) accept X as the random variate.

  4. Else try again.

   To apply the ratio-of-uniforms algorithm to a certain density we
have to solve the simple optimization problems in the definitions above
to obtain the design constants u^-, u^+, and v^+.  This simple
algorithm works for all distributions with bounded densities that have
subquadratic tails (i.e., tails like 1/x^2 or lower). For most standard
distributions it has quite good rejection constants.  (E.g. 1.3688 for
the normal and 1.4715 for the exponential distribution.)

   Nevertheless, we use more sophisticated method that construct better
fitting envelopes, like method AROU (*note AROU::), or even avoid the
computation of these design constants and thus have almost no setup,
like method SROU (*note SROU::).

The Generalized Ratio-of-Uniforms Method
----------------------------------------

The Ratio-of-Uniforms method can be generalized: If a point (U,V) is
uniformly distributed in the set

     A_f= { (u,v) : 0 < v <= (f(u/v^r+ mu))^(1/(r+1)) }

then X=U/V^r+ mu has the denity f(x).  The minimal bounding rectangle
of this region is given by (u^-,u^+)x(0,v^+) where

     v^+ = sup_(b_l<x<b_r) (f(x))^(1/(r+1)),
     u^- = inf_(b_l<x<b_r) (x- mu) (f(x))^(r/(r+1)),
     u^+ = sup_(b_l<x<b_r) (x- mu) (f(x))^(r/(r+1)).

The above algorithm has then to be adjusted accordingly.  Notice that
the original Ratio-of-Uniforms method is the special case with r=1.


File: unuran.info,  Node: DiscreteInversion,  Next: IndexedSearch,  Prev: Ratio-of-Uniforms,  Up: RVG

A.5 Inversion for Discrete Distributions
========================================

We have already presented the idea of the inversion method to generate
from continuous random variables (*note Inversion::). For a discrete
random variable X we can write it mathematically in the same way:

     X=F^(-1)(U),

where F is the CDF of the desired distribution and U is a uniform U(0,1)
random number. The difference compared to the continuous case is that F
is now a step-function. The following figure illustrates the idea of
discrete inversion for a simple distribution.


[image src="figures/discrete_inversion.png" text="
  ^
  |
1 +                                =======================
  |                                .
  |                                .
  |                                .
  |                     ===========.
  |                     .
  |                     .
  +---------------------+
  |                     |
  |                     |
  |          ===========|
  |          .          |
  |          .          |
  |          .          |
  |          .          |
  +==========.          |
  |                     V
  +----------+----------+----------+----------+----------+---->
  0          1          2          3          4          5

"]

   To realize this idea on a computer we have to use a search
algorithm. For the simplest version called _Sequential Search_ the CDF
is computed on-the-fly as sum of the probabilities p(k), since this is
usually much cheaper than computing the CDF directly. It is obvious
that the basic form of the search algorithm only works for discrete
random variables with probability mass functions p(k) for nonnegative k.
The sequential search algorithm consists of the following basic steps:

  1. Generate a U(0,1) random number U.

  2. Set X to 0 and P to p(0).

  3. Do while U > P

  4.       Set X to X+1 and P to P+p(X).

  5. Return X.

   With the exception of some very simple discrete distributions,
sequential search algorithms become very slow as the while-loop has to
be repeated very often. The expected number of iterations, i.e., the
number of comparisons in the while condition, is equal to the
expectation of the distribution plus 1.  It can therefore become
arbitrary large or even infinity if the tail of the distribution is
very heavy. Another serious problem can be critical round-off errors
due to summing up many probabilities p(k).  To speed up the search
procedure it is best to use indexed search.


File: unuran.info,  Node: IndexedSearch,  Prev: DiscreteInversion,  Up: RVG

A.6 Indexed Search (Guide Table Method)
=======================================

The idea to speed up the sequential search algorithm is easy to
understand. Instead of starting always at 0 we store a table of size C
with starting points for our search. For this table we compute F^(-1)(U)
for C equidistributed values of U, i.e., for u_i = i/C, i=0,...,C-1.
Such a table is called _guide table_ or _hash table_.  Then it is easy
to prove that for every U in (0,1) the guide table entry for k=floor(UC)
is bounded by F^(-1)(U).  This shows that we can really start our
sequential search procedure from the table entry for k and the index k
of the correct table entry can be found rapidly by means of the
truncation operation.

   The two main differences between _indexed search_ and _sequential
search_ are that we start searching at the number determined by the
guide table, and that we have to compute and store the cumulative
probabilities in the setup as we have to know the cumulative
probability for the starting point of the search algorithm. The
rounding problems that can occur in the sequential search algorithm can
occur here as well.  Compared to sequential search we have now the
obvious drawback of a slow setup. The computation of the cumulative
probabilities grows linear with the size of the domain of the
distribution L.  What we gain is really high speed as the marginal
execution time of the sampling algorithm becomes very small. The
expected number of comparisons is bounded by 1+L/C.  This shows that
there is a trade-off between speed and the size of the guide table.
Cache-effects in modern computers will however slow down the speed-up
for really large table sizes.  Thus we recommend to use a guide table
that is about two times larger than the probability vector to obtain
optimal speed.


File: unuran.info,  Node: Glossary,  Next: Bibliography,  Prev: RVG,  Up: Top

Appendix B Glossary
*******************

*CDF*
     cumulative distribution function.

*HR*
     hazard rate (or failure rate).

*inverse local concavity*
     local concavity of inverse PDF f^(-1)(y) expressed in term of x =
     f^(-1)(y).  Is is given by ilc_f(x) = 1 + x f"(x) / f'(x)

*local concavity*
     maximum value of c such that PDF f(x) is T_c.  Is is given by
     lc_f(x) = 1 - f"(x) f(x) / f'(x)^2

*PDF*
     probability density function.

*dPDF*
     derivative (gradient) of probability density function.

*PMF*
     probability mass function.

*PV*
     (finite) probability vector.

*URNG*
     uniform random number generator.

*U(a,b)*
     continuous uniform distribution on the interval (a,b).

*T-concave*
     a function f(x) is called T-convace if the transformed function
     T(f(x)) is concave.  We only deal with transformations T_c, where
    `c = 0'
          T(x) = log(x)

    `c = -0.5'
          T(x) = -1/sqrt(x)

    `c != 0'
          T(x) = sign(x) * x^c

*u-error*
     for a given approximate inverse CDF X=G^(-1)(U) the u-error is
     given as

          uerror = |U-F(G^(-1)(U))|

     where F denotes the exact CDF.  Goodness-of-fit tests like the
     Kolmogorov-Smirnov test or the chi-squared test look at this type
     of error.  See *note Inversion:: for more details.

*u-resolution*
     the maximal tolerated u-error for an approximate inverse CDF.

*x-error*
     for a given approximate inverse CDF X=G^(-1)(U) the x-error is
     given as

          xerror = |F^(-1)(U)-G^(-1)(U)|

     where F^(-1) denotes the exact inverse CDF.  The x-error measure
     the deviation of G^(-1)(U) from the exact result.  Notice that we
     have to distinguish between _absolute_ and _relative_ x-error. In
     UNU.RAN we use the absolute x-error near 0 and the relative
     x-error otherwise.  See *note Inversion:: for more details.

*x-resolution*
     the maximal tolerated x-error for an approximate inverse CDF.



File: unuran.info,  Node: Bibliography,  Next: FIndex,  Prev: Glossary,  Up: Top

Appendix C Bibliography
***********************

Standard Distributions
----------------------

[JKKa92]
     N.L. JOHNSON, S. KOTZ, AND A.W. KEMP (1992).  Univariate Discrete
     Distributions, 2nd edition, John Wiley & Sons, Inc., New York.

[JKBb94]
     N.L. JOHNSON, S. KOTZ, AND N. BALAKRISHNAN (1994).  Continuous
     Univariate Distributions, Volume 1, 2nd edition, John Wiley &
     Sons, Inc., New York.

[JKBc95]
     N.L. JOHNSON, S. KOTZ, AND N. BALAKRISHNAN (1995).  Continuous
     Univariate Distributions, Volume 2, 2nd edition, John Wiley &
     Sons, Inc., New York.

[JKBd97]
     N.L. JOHNSON, S. KOTZ, AND N. BALAKRISHNAN (1997).  Discrete
     Multivariate Distributions, John Wiley & Sons, Inc., New York.

[KBJe00]
     S. KOTZ, N. BALAKRISHNAN, AND N.L. JOHNSON (2000).  Continuous
     Multivariate Distributions, Volume 1: Models and Applications,
     John Wiley & Sons, Inc., New York.


Universal Methods - Surveys
---------------------------

[HLD04]
     W. HO"RMANN, J. LEYDOLD, AND G. DERFLINGER (2004).  Automatic
     Nonuniform Random Variate Generation, Springer, Berlin.


Universal Methods
-----------------

[AJa93]
     J.H. AHRENS (1993).  Sampling from general distributions by
     suboptimal division of domains, Grazer Math. Berichte 319, 30pp.

[AJa95]
     J.H. AHRENS (1995).  An one-table method for sampling from
     continuous and discrete distributions, Computing 54(2), pp.
     127-146.

[CAa74]
     H.C. CHEN AND Y. ASAU (1974).  On generating random variates from
     an empirical distribution, AIIE Trans. 6, pp. 163-166.

[DHLa08]
     G. DERFLINGER, W. HO"RMANN, AND J. LEYDOLD (2008).  Numerical
     inversion when only the density function is known, Research Report
     Series of the Department of Statistics and Mathematics 78, WU
     Wien, Augasse 2-6, A-1090 Wien, Austria,
     `http://epub.wu.ac.at/english/'.

[DLa86]
     L. DEVROYE (1986).  Non-Uniform Random Variate Generation,
     Springer Verlag, New York.

[GWa92]
     W.R. GILKS AND P. WILD (1992).  Adaptive rejection sampling for
     Gibbs sampling, Applied Statistics 41, pp. 337-348.

[HWa95]
     W. HO"RMANN (1995).  A rejection technique for sampling from
     T-concave distributions, ACM Trans. Math. Software 21(2), pp.
     182-193.

[HDa96]
     W. HO"RMANN AND G. DERFLINGER (1996).  Rejection-inversion to
     generate variates from monotone discrete distributions, ACM TOMACS
     6(3), 169-184.

[HLa00]
     W. HO"RMANN AND J. LEYDOLD (2000).  Automatic random variate
     generation for simulation input.  In: J.A. Joines, R. Barton, P.
     Fishwick, K. Kang (eds.), Proceedings of the 2000 Winter
     Simulation Conference, pp. 675-682.

[HLa03]
     W. HO"RMANN AND J. LEYDOLD (2003).  Continuous Random Variate
     Generation by Fast Numerical Inversion, ACM TOMACS 13(4), 347-362.

[HLDa07]
     W. HO"RMANN, J. LEYDOLD, AND G. DERFLINGER (2007).  Automatic
     Random Variate Generation for Unbounded Densities, ACM Trans.
     Model. Comput. Simul. 17(4), pp.18.

[KLPa05]
     R. KARAWATZKI, J. LEYDOLD, AND K. PO"TZELBERGER (2005).  Automatic
     Markov chain Monte Carlo procedures for sampling from multivariate
     distributions, Research Report Series of the Department of
     Statistics and Mathematics 27, WU Wien, Augasse 2-6, A-1090 Wien,
     Austria, `http://epub.wu.ac.at/english/'.

[LJa98]
     J. LEYDOLD (1998).  A Rejection Technique for Sampling from
     Log-Concave Multivariate Distributions, ACM TOMACS 8(3), pp.
     254-280.

[LJa00]
     J. LEYDOLD (2000).  Automatic Sampling with the Ratio-of-Uniforms
     Method, ACM Trans. Math. Software 26(1), pp. 78-98.

[LJa01]
     J. LEYDOLD (2001).  A simple universal generator for continuous
     and discrete univariate T-concave distributions, ACM Trans. Math.
     Software 27(1), pp. 66-82.

[LJa02]
     J. LEYDOLD (2003).  Short universal generators via generalized
     ratio-of-uniforms method, Math. Comp. 72(243), pp. 1453-1471.

[WGS91]
     J.C. WAKEFIELD, A.E. GELFAND, AND A.F.M. SMITH (1992).  Efficient
     generation of random variates via the ratio-of-uniforms method,
     Statist. Comput. 1(2), pp. 129-133.

[WAa77]
     A.J. WALKER (1977).  An efficient method for generating discrete
     random variables with general distributions, ACM Trans. Math.
     Software 3, pp. 253-256.


Special Generators
------------------

[ADa74]
     J.H. AHRENS, U. DIETER (1974).  Computer methods for sampling from
     gamma, beta, Poisson and binomial distributions, Computing 12,
     223-246.

[ADa82]
     J.H. AHRENS, U. DIETER (1982).  Generating gamma variates by a
     modified rejection technique, Communications of the ACM 25, 47-54.

[ADb82]
     J.H. AHRENS, U. DIETER (1982).  Computer generation of Poisson
     deviates from modified normal distributions, ACM Trans. Math.
     Software 8, 163-179.

[BMa58]
     G.E.P. BOX AND M.E. MULLER (1958).  A note on the generation of
     random normal deviates, Annals Math. Statist. 29, 610-611.

[CHa77]
     R.C.H. CHENG (1977).  The Generation of Gamma Variables with
     Non-Integral Shape Parameter, Appl. Statist. 26(1), 71-75.

[Dag89]
     J.S. DAGPUNAR (1989).  An Easily Implemented Generalised Inverse
     Gaussian Generator, Commun. Statist. Simul. 18(2), 703-710.

[HDa90]
     W. HO"RMANN AND G. DERFLINGER (1990).  The ACR Method for
     generating normal random variables, OR Spektrum 12, 181-185.

[KAa81]
     A.W. KEMP (1981).  Efficient generation of logarithmically
     distributed pseudo-random variables, Appl. Statist. 30, 249-253.

[KRa76]
     A.J. KINDERMAN AND J.G. RAMAGE (1976).  Computer Generation of
     Normal Random Variables, J. Am. Stat. Assoc. 71(356), 893 - 898.

[MJa87]
     J.F. MONAHAN (1987).  An algorithm for generating chi random
     variables, ACM Trans. Math. Software 13, 168-172.

[MGa62]
     G. MARSAGLIA (1962).  Improving the Polar Method for Generating a
     Pair of Random Variables, Boeing Sci. Res. Lab., Seattle,
     Washington.

[MOa84]
     G. MARSAGLIA AND I. OLKIN (1984).  Generating Correlation Matrices,
     SIAM J. Sci. Stat. Comput 5, 470-475.

[STa89]
     E. STADLOBER (1989).  Sampling from Poisson, binomial and
     hypergeometric distributions: ratio of uniforms as a simple and
     fast alternative, Bericht 303, Math. Stat. Sektion,
     Forschungsgesellschaft Joanneum, Graz.

[ZHa94]
     H. ZECHNER (1994).  Efficient sampling from continuous and
     discrete unimodal distributions, Pd.D. Thesis, 156 pp., Technical
     University Graz, Austria.


Other references
----------------

[CPa76]
     R. CRANLEY AND T.N.L. PATTERSON (1976).  Randomization of number
     theoretic methods for multiple integration, SIAM J. Num. Anal.,
     Vol. 13, pp. 904-914.

[HJa61]
     R. HOOKE AND T.A. JEEVES (1961).  Direct Search Solution of
     Numerical and Statistical Problems, Journal of the ACM, Vol. 8,
     April 1961, pp. 212-229.



File: unuran.info,  Node: FIndex,  Prev: Bibliography,  Up: Top

Appendix D Function Index
*************************

[index]
* Menu:

* FALSE:                                 Math.                (line  18)
* INT_MAX:                               Math.                (line  12)
* INT_MIN:                               Math.                (line  13)
* TRUE:                                  Math.                (line  17)
* unur_arou_chg_verify:                  AROU.                (line 136)
* unur_arou_get_hatarea:                 AROU.                (line  99)
* unur_arou_get_sqhratio:                AROU.                (line  94)
* unur_arou_get_squeezearea:             AROU.                (line 104)
* unur_arou_new:                         AROU.                (line  50)
* unur_arou_set_cpoints:                 AROU.                (line 116)
* unur_arou_set_darsfactor:              AROU.                (line  71)
* unur_arou_set_guidefactor:             AROU.                (line 127)
* unur_arou_set_max_segments:            AROU.                (line 109)
* unur_arou_set_max_sqhratio:            AROU.                (line  83)
* unur_arou_set_pedantic:                AROU.                (line 146)
* unur_arou_set_usecenter:               AROU.                (line 123)
* unur_arou_set_usedars:                 AROU.                (line  54)
* unur_arou_set_verify:                  AROU.                (line 135)
* unur_ars_chg_reinit_ncpoints:          ARS.                 (line 120)
* unur_ars_chg_reinit_percentiles:       ARS.                 (line 103)
* unur_ars_chg_verify:                   ARS.                 (line 135)
* unur_ars_eval_invcdfhat:               ARS.                 (line 171)
* unur_ars_get_loghatarea:               ARS.                 (line 166)
* unur_ars_new:                          ARS.                 (line  79)
* unur_ars_set_cpoints:                  ARS.                 (line  92)
* unur_ars_set_max_intervals:            ARS.                 (line  83)
* unur_ars_set_max_iter:                 ARS.                 (line 128)
* unur_ars_set_pedantic:                 ARS.                 (line 145)
* unur_ars_set_reinit_ncpoints:          ARS.                 (line 118)
* unur_ars_set_reinit_percentiles:       ARS.                 (line 101)
* unur_ars_set_verify:                   ARS.                 (line 134)
* unur_auto_new:                         AUTO.                (line  33)
* unur_auto_set_logss:                   AUTO.                (line  36)
* unur_cext_get_distrparams:             CEXT.                (line 230)
* unur_cext_get_ndistrparams:            CEXT.                (line 231)
* unur_cext_get_params:                  CEXT.                (line 217)
* unur_cext_new:                         CEXT.                (line 189)
* unur_cext_set_init:                    CEXT.                (line 193)
* unur_cext_set_sample:                  CEXT.                (line 207)
* unur_chg_debug:                        Debug.               (line  72)
* unur_chg_urng:                         URNG.                (line 185)
* unur_chg_urng_aux:                     URNG.                (line 219)
* unur_chgto_urng_aux_default:           URNG.                (line 212)
* unur_cstd_chg_truncated:               CSTD.                (line  93)
* unur_cstd_new:                         CSTD.                (line  66)
* unur_cstd_set_variant:                 CSTD.                (line  80)
* unur_dari_chg_verify:                  DARI.                (line 101)
* unur_dari_new:                         DARI.                (line  63)
* unur_dari_set_cpfactor:                DARI.                (line  90)
* unur_dari_set_squeeze:                 DARI.                (line  67)
* unur_dari_set_tablesize:               DARI.                (line  80)
* unur_dari_set_verify:                  DARI.                (line 100)
* unur_dau_new:                          DAU.                 (line  49)
* unur_dau_set_urnfactor:                DAU.                 (line  53)
* UNUR_DEBUG_ADAPT:                      Debug.               (line  42)
* UNUR_DEBUG_ALL:                        Debug.               (line  33)
* UNUR_DEBUG_INIT:                       Debug.               (line  36)
* UNUR_DEBUG_OFF:                        Debug.               (line  30)
* UNUR_DEBUG_SAMPLE:                     Debug.               (line  45)
* UNUR_DEBUG_SETUP:                      Debug.               (line  39)
* unur_dext_get_distrparams:             DEXT.                (line 230)
* unur_dext_get_ndistrparams:            DEXT.                (line 231)
* unur_dext_get_params:                  DEXT.                (line 217)
* unur_dext_new:                         DEXT.                (line 189)
* unur_dext_set_init:                    DEXT.                (line 193)
* unur_dext_set_sample:                  DEXT.                (line 207)
* unur_dgt_new:                          DGT.                 (line  75)
* unur_dgt_set_guidefactor:              DGT.                 (line  79)
* unur_dgt_set_variant:                  DGT.                 (line  91)
* unur_distr_:                           Stddist.             (line  21)
* unur_distr_beta:                       beta.                (line   6)
* unur_distr_binomial:                   binomial.            (line   6)
* unur_distr_cauchy:                     cauchy.              (line   6)
* unur_distr_cemp_get_data:              CEMP.                (line  43)
* unur_distr_cemp_new:                   CEMP.                (line  20)
* unur_distr_cemp_read_data:             CEMP.                (line  32)
* unur_distr_cemp_set_data:              CEMP.                (line  28)
* unur_distr_cemp_set_hist:              CEMP.                (line  51)
* unur_distr_cemp_set_hist_bins:         CEMP.                (line  85)
* unur_distr_cemp_set_hist_domain:       CEMP.                (line  80)
* unur_distr_cemp_set_hist_prob:         CEMP.                (line  66)
* unur_distr_chi:                        chi.                 (line   6)
* unur_distr_chisquare:                  chisquare.           (line   6)
* unur_distr_condi_get_condition:        CONDI.               (line  94)
* unur_distr_condi_get_distribution:     CONDI.               (line 103)
* unur_distr_condi_new:                  CONDI.               (line  39)
* unur_distr_condi_set_condition:        CONDI.               (line  71)
* unur_distr_cont_eval_cdf:              CONT.                (line 148)
* unur_distr_cont_eval_dlogpdf:          CONT.                (line 176)
* unur_distr_cont_eval_dpdf:             CONT.                (line 146)
* unur_distr_cont_eval_hr:               CONT.                (line 361)
* unur_distr_cont_eval_invcdf:           CONT.                (line 150)
* unur_distr_cont_eval_logcdf:           CONT.                (line 178)
* unur_distr_cont_eval_logpdf:           CONT.                (line 174)
* unur_distr_cont_eval_pdf:              CONT.                (line 144)
* unur_distr_cont_get_cdf:               CONT.                (line 134)
* unur_distr_cont_get_cdfstr:            CONT.                (line 205)
* unur_distr_cont_get_center:            CONT.                (line 430)
* unur_distr_cont_get_dlogpdf:           CONT.                (line 170)
* unur_distr_cont_get_dlogpdfstr:        CONT.                (line 283)
* unur_distr_cont_get_domain:            CONT.                (line 309)
* unur_distr_cont_get_dpdf:              CONT.                (line 132)
* unur_distr_cont_get_dpdfstr:           CONT.                (line 203)
* unur_distr_cont_get_hr:                CONT.                (line 354)
* unur_distr_cont_get_hrstr:             CONT.                (line 379)
* unur_distr_cont_get_invcdf:            CONT.                (line 136)
* unur_distr_cont_get_logcdf:            CONT.                (line 172)
* unur_distr_cont_get_logcdfstr:         CONT.                (line 287)
* unur_distr_cont_get_logpdf:            CONT.                (line 168)
* unur_distr_cont_get_logpdfstr:         CONT.                (line 281)
* unur_distr_cont_get_mode:              CONT.                (line 409)
* unur_distr_cont_get_pdf:               CONT.                (line 130)
* unur_distr_cont_get_pdfarea:           CONT.                (line 460)
* unur_distr_cont_get_pdfparams:         CONT.                (line 242)
* unur_distr_cont_get_pdfparams_vec:     CONT.                (line 270)
* unur_distr_cont_get_pdfstr:            CONT.                (line 201)
* unur_distr_cont_get_truncated:         CONT.                (line 315)
* unur_distr_cont_new:                   CONT.                (line  73)
* unur_distr_cont_set_cdf:               CONT.                (line  84)
* unur_distr_cont_set_cdfstr:            CONT.                (line 195)
* unur_distr_cont_set_center:            CONT.                (line 418)
* unur_distr_cont_set_dlogpdf:           CONT.                (line 164)
* unur_distr_cont_set_domain:            CONT.                (line 292)
* unur_distr_cont_set_dpdf:              CONT.                (line  82)
* unur_distr_cont_set_hr:                CONT.                (line 324)
* unur_distr_cont_set_hrstr:             CONT.                (line 368)
* unur_distr_cont_set_invcdf:            CONT.                (line  86)
* unur_distr_cont_set_logcdf:            CONT.                (line 166)
* unur_distr_cont_set_logcdfstr:         CONT.                (line 285)
* unur_distr_cont_set_logpdf:            CONT.                (line 162)
* unur_distr_cont_set_logpdfstr:         CONT.                (line 279)
* unur_distr_cont_set_mode:              CONT.                (line 392)
* unur_distr_cont_set_pdf:               CONT.                (line  80)
* unur_distr_cont_set_pdfarea:           CONT.                (line 436)
* unur_distr_cont_set_pdfparams:         CONT.                (line 212)
* unur_distr_cont_set_pdfparams_vec:     CONT.                (line 251)
* unur_distr_cont_set_pdfstr:            CONT.                (line 183)
* unur_distr_cont_upd_mode:              CONT.                (line 401)
* unur_distr_cont_upd_pdfarea:           CONT.                (line 445)
* unur_distr_copula:                     copula.              (line   6)
* unur_distr_corder_eval_cdf:            CORDER.              (line  78)
* unur_distr_corder_eval_dpdf:           CORDER.              (line  76)
* unur_distr_corder_eval_pdf:            CORDER.              (line  74)
* unur_distr_corder_get_cdf:             CORDER.              (line  65)
* unur_distr_corder_get_distribution:    CORDER.              (line  37)
* unur_distr_corder_get_domain:          CORDER.              (line 107)
* unur_distr_corder_get_dpdf:            CORDER.              (line  63)
* unur_distr_corder_get_mode:            CORDER.              (line 136)
* unur_distr_corder_get_pdf:             CORDER.              (line  61)
* unur_distr_corder_get_pdfarea:         CORDER.              (line 157)
* unur_distr_corder_get_pdfparams:       CORDER.              (line  96)
* unur_distr_corder_get_rank:            CORDER.              (line  51)
* unur_distr_corder_get_truncated:       CORDER.              (line 112)
* unur_distr_corder_new:                 CORDER.              (line  20)
* unur_distr_corder_set_domain:          CORDER.              (line 102)
* unur_distr_corder_set_mode:            CORDER.              (line 125)
* unur_distr_corder_set_pdfarea:         CORDER.              (line 141)
* unur_distr_corder_set_pdfparams:       CORDER.              (line  91)
* unur_distr_corder_set_rank:            CORDER.              (line  44)
* unur_distr_corder_upd_mode:            CORDER.              (line 130)
* unur_distr_corder_upd_pdfarea:         CORDER.              (line 146)
* unur_distr_correlation:                correlation.         (line   6)
* unur_distr_cvec_eval_dlogpdf:          CVEC.                (line 192)
* unur_distr_cvec_eval_dpdf:             CVEC.                (line 153)
* unur_distr_cvec_eval_logpdf:           CVEC.                (line 190)
* unur_distr_cvec_eval_pdf:              CVEC.                (line 141)
* unur_distr_cvec_eval_pdlogpdf:         CVEC.                (line 194)
* unur_distr_cvec_eval_pdpdf:            CVEC.                (line 165)
* unur_distr_cvec_get_center:            CVEC.                (line 542)
* unur_distr_cvec_get_cholesky:          CVEC.                (line 287)
* unur_distr_cvec_get_covar:             CVEC.                (line 285)
* unur_distr_cvec_get_covar_inv:         CVEC.                (line 289)
* unur_distr_cvec_get_dlogpdf:           CVEC.                (line 188)
* unur_distr_cvec_get_dpdf:              CVEC.                (line 134)
* unur_distr_cvec_get_logpdf:            CVEC.                (line 186)
* unur_distr_cvec_get_marginal:          CVEC.                (line 386)
* unur_distr_cvec_get_mean:              CVEC.                (line 211)
* unur_distr_cvec_get_mode:              CVEC.                (line 512)
* unur_distr_cvec_get_pdf:               CVEC.                (line 127)
* unur_distr_cvec_get_pdfparams:         CVEC.                (line 419)
* unur_distr_cvec_get_pdfparams_vec:     CVEC.                (line 458)
* unur_distr_cvec_get_pdfvol:            CVEC.                (line 564)
* unur_distr_cvec_get_rankcorr:          CVEC.                (line 332)
* unur_distr_cvec_get_rk_cholesky:       CVEC.                (line 334)
* unur_distr_cvec_is_indomain:           CVEC.                (line 489)
* unur_distr_cvec_new:                   CVEC.                (line  64)
* unur_distr_cvec_set_center:            CVEC.                (line 524)
* unur_distr_cvec_set_covar:             CVEC.                (line 220)
* unur_distr_cvec_set_covar_inv:         CVEC.                (line 260)
* unur_distr_cvec_set_dlogpdf:           CVEC.                (line 182)
* unur_distr_cvec_set_domain_rect:       CVEC.                (line 468)
* unur_distr_cvec_set_dpdf:              CVEC.                (line  93)
* unur_distr_cvec_set_logpdf:            CVEC.                (line 180)
* unur_distr_cvec_set_marginal_array:    CVEC.                (line 354)
* unur_distr_cvec_set_marginal_list:     CVEC.                (line 365)
* unur_distr_cvec_set_marginals:         CVEC.                (line 346)
* unur_distr_cvec_set_mean:              CVEC.                (line 198)
* unur_distr_cvec_set_mode:              CVEC.                (line 500)
* unur_distr_cvec_set_pdf:               CVEC.                (line  77)
* unur_distr_cvec_set_pdfparams:         CVEC.                (line 394)
* unur_distr_cvec_set_pdfparams_vec:     CVEC.                (line 427)
* unur_distr_cvec_set_pdfvol:            CVEC.                (line 550)
* unur_distr_cvec_set_pdlogpdf:          CVEC.                (line 184)
* unur_distr_cvec_set_pdpdf:             CVEC.                (line 111)
* unur_distr_cvec_set_rankcorr:          CVEC.                (line 304)
* unur_distr_cvec_upd_mode:              CVEC.                (line 505)
* unur_distr_cvec_upd_pdfvol:            CVEC.                (line 554)
* unur_distr_cvemp_get_data:             CVEMP.               (line  48)
* unur_distr_cvemp_new:                  CVEMP.               (line  15)
* unur_distr_cvemp_read_data:            CVEMP.               (line  35)
* unur_distr_cvemp_set_data:             CVEMP.               (line  26)
* unur_distr_discr_eval_cdf:             DISCR.               (line 140)
* unur_distr_discr_eval_invcdf:          DISCR.               (line 153)
* unur_distr_discr_eval_pmf:             DISCR.               (line 138)
* unur_distr_discr_eval_pv:              DISCR.               (line 136)
* unur_distr_discr_get_cdfstr:           DISCR.               (line 182)
* unur_distr_discr_get_domain:           DISCR.               (line 231)
* unur_distr_discr_get_mode:             DISCR.               (line 256)
* unur_distr_discr_get_pmfparams:        DISCR.               (line 211)
* unur_distr_discr_get_pmfstr:           DISCR.               (line 180)
* unur_distr_discr_get_pmfsum:           DISCR.               (line 289)
* unur_distr_discr_get_pv:               DISCR.               (line  98)
* unur_distr_discr_make_pv:              DISCR.               (line  76)
* unur_distr_discr_new:                  DISCR.               (line  43)
* unur_distr_discr_set_cdf:              DISCR.               (line 107)
* unur_distr_discr_set_cdfstr:           DISCR.               (line 175)
* unur_distr_discr_set_domain:           DISCR.               (line 217)
* unur_distr_discr_set_invcdf:           DISCR.               (line 130)
* unur_distr_discr_set_mode:             DISCR.               (line 245)
* unur_distr_discr_set_pmf:              DISCR.               (line 105)
* unur_distr_discr_set_pmfparams:        DISCR.               (line 189)
* unur_distr_discr_set_pmfstr:           DISCR.               (line 164)
* unur_distr_discr_set_pmfsum:           DISCR.               (line 265)
* unur_distr_discr_set_pv:               DISCR.               (line  61)
* unur_distr_discr_upd_mode:             DISCR.               (line 248)
* unur_distr_discr_upd_pmfsum:           DISCR.               (line 274)
* unur_distr_exponential:                exponential.         (line   6)
* unur_distr_extremeI:                   extremeI.            (line   6)
* unur_distr_extremeII:                  extremeII.           (line   6)
* unur_distr_F:                          F.                   (line   6)
* unur_distr_free:                       AllDistr.            (line  20)
* unur_distr_gamma:                      gamma.               (line   6)
* unur_distr_geometric:                  geometric.           (line   6)
* unur_distr_get_dim:                    AllDistr.            (line  32)
* unur_distr_get_extobj:                 AllDistr.            (line 107)
* unur_distr_get_name:                   AllDistr.            (line  26)
* unur_distr_get_type:                   AllDistr.            (line  44)
* unur_distr_gig:                        gig.                 (line   6)
* unur_distr_gig2:                       gig2.                (line   6)
* unur_distr_hyperbolic:                 hyperbolic.          (line   6)
* unur_distr_hypergeometric:             hypergeometric.      (line   6)
* unur_distr_ig:                         ig.                  (line   6)
* unur_distr_is_cemp:                    AllDistr.            (line  73)
* unur_distr_is_cont:                    AllDistr.            (line  67)
* unur_distr_is_cvec:                    AllDistr.            (line  70)
* unur_distr_is_cvemp:                   AllDistr.            (line  77)
* unur_distr_is_discr:                   AllDistr.            (line  81)
* unur_distr_is_matr:                    AllDistr.            (line  84)
* unur_distr_laplace:                    laplace.             (line   6)
* unur_distr_logarithmic:                logarithmic.         (line   6)
* unur_distr_logistic:                   logistic.            (line   6)
* unur_distr_lognormal:                  lognormal.           (line   6)
* unur_distr_lomax:                      lomax.               (line   6)
* unur_distr_matr_get_dim:               MATR.                (line  30)
* unur_distr_matr_new:                   MATR.                (line  14)
* unur_distr_multicauchy:                multicauchy.         (line   6)
* unur_distr_multiexponential:           multiexponential.    (line   6)
* unur_distr_multinormal:                multinormal.         (line   6)
* unur_distr_multistudent:               multistudent.        (line   6)
* unur_distr_negativebinomial:           negativebinomial.    (line   6)
* unur_distr_normal:                     normal.              (line   6)
* unur_distr_pareto:                     pareto.              (line   6)
* unur_distr_poisson:                    poisson.             (line   6)
* unur_distr_powerexponential:           powerexponential.    (line   6)
* unur_distr_rayleigh:                   rayleigh.            (line   6)
* unur_distr_set_extobj:                 AllDistr.            (line  88)
* unur_distr_set_name:                   AllDistr.            (line  24)
* unur_distr_slash:                      slash.               (line   6)
* unur_distr_student:                    student.             (line   6)
* unur_distr_triangular:                 triangular.          (line   6)
* unur_distr_uniform:                    uniform.             (line   6)
* unur_distr_weibull:                    weibull.             (line   6)
* unur_dsrou_chg_cdfatmode:              DSROU.               (line  85)
* unur_dsrou_chg_verify:                 DSROU.               (line  75)
* unur_dsrou_new:                        DSROU.               (line  58)
* unur_dsrou_set_cdfatmode:              DSROU.               (line  62)
* unur_dsrou_set_verify:                 DSROU.               (line  73)
* unur_dss_new:                          DSS.                 (line  54)
* unur_dstd_chg_truncated:               DSTD.                (line  90)
* unur_dstd_new:                         DSTD.                (line  65)
* unur_dstd_set_variant:                 DSTD.                (line  77)
* unur_empk_chg_smoothing:               EMPK.                (line 170)
* unur_empk_chg_varcor:                  EMPK.                (line 185)
* unur_empk_new:                         EMPK.                (line 100)
* unur_empk_set_beta:                    EMPK.                (line 158)
* unur_empk_set_kernel:                  EMPK.                (line 104)
* unur_empk_set_kernelgen:               EMPK.                (line 132)
* unur_empk_set_positive:                EMPK.                (line 194)
* unur_empk_set_smoothing:               EMPK.                (line 168)
* unur_empk_set_varcor:                  EMPK.                (line 184)
* unur_empl_new:                         EMPL.                (line  52)
* UNUR_ERR_COMPILE:                      Errno.               (line 130)
* UNUR_ERR_COOKIE:                       Errno.               (line 115)
* UNUR_ERR_DISTR_DATA:                   Errno.               (line  38)
* UNUR_ERR_DISTR_DOMAIN:                 Errno.               (line  23)
* UNUR_ERR_DISTR_GEN:                    Errno.               (line  26)
* UNUR_ERR_DISTR_GET:                    Errno.               (line  17)
* UNUR_ERR_DISTR_INVALID:                Errno.               (line  35)
* UNUR_ERR_DISTR_NPARAMS:                Errno.               (line  20)
* UNUR_ERR_DISTR_PROP:                   Errno.               (line  41)
* UNUR_ERR_DISTR_REQUIRED:               Errno.               (line  29)
* UNUR_ERR_DISTR_SET:                    Errno.               (line  14)
* UNUR_ERR_DISTR_UNKNOWN:                Errno.               (line  32)
* UNUR_ERR_DOMAIN:                       Errno.               (line 103)
* UNUR_ERR_FSTR_DERIV:                   Errno.               (line  99)
* UNUR_ERR_FSTR_SYNTAX:                  Errno.               (line  96)
* UNUR_ERR_GEN:                          Errno.               (line  55)
* UNUR_ERR_GEN_CONDITION:                Errno.               (line  61)
* UNUR_ERR_GEN_DATA:                     Errno.               (line  58)
* UNUR_ERR_GEN_INVALID:                  Errno.               (line  64)
* UNUR_ERR_GEN_SAMPLING:                 Errno.               (line  67)
* UNUR_ERR_GENERIC:                      Errno.               (line 118)
* UNUR_ERR_INF:                          Errno.               (line 124)
* UNUR_ERR_MALLOC:                       Errno.               (line 109)
* UNUR_ERR_NAN:                          Errno.               (line 127)
* UNUR_ERR_NO_QUANTILE:                  Errno.               (line  73)
* UNUR_ERR_NO_REINIT:                    Errno.               (line  70)
* UNUR_ERR_NULL:                         Errno.               (line 112)
* UNUR_ERR_PAR_INVALID:                  Errno.               (line  51)
* UNUR_ERR_PAR_SET:                      Errno.               (line  45)
* UNUR_ERR_PAR_VARIANT:                  Errno.               (line  48)
* UNUR_ERR_ROUNDOFF:                     Errno.               (line 106)
* UNUR_ERR_SHOULD_NOT_HAPPEN:            Errno.               (line 134)
* UNUR_ERR_SILENT:                       Errno.               (line 121)
* UNUR_ERR_STR:                          Errno.               (line  84)
* UNUR_ERR_STR_INVALID:                  Errno.               (line  93)
* UNUR_ERR_STR_SYNTAX:                   Errno.               (line  90)
* UNUR_ERR_STR_UNKNOWN:                  Errno.               (line  87)
* UNUR_ERR_URNG:                         Errno.               (line  77)
* UNUR_ERR_URNG_MISS:                    Errno.               (line  80)
* unur_errno:                            Error_reporting.     (line  87)
* unur_free:                             Methods_all.         (line 104)
* unur_gen_anti:                         URNG.                (line 327)
* unur_gen_info:                         Methods_all.         (line 107)
* unur_gen_nextsub:                      URNG.                (line 329)
* unur_gen_reset:                        URNG.                (line 328)
* unur_gen_resetsub:                     URNG.                (line 330)
* unur_gen_seed:                         URNG.                (line 326)
* unur_gen_sync:                         URNG.                (line 324)
* unur_get_default_urng:                 URNG.                (line 159)
* unur_get_default_urng_aux:             URNG.                (line 169)
* unur_get_dimension:                    Methods_all.         (line 117)
* unur_get_distr:                        Methods_all.         (line 124)
* unur_get_errno:                        Error_reporting.     (line  90)
* unur_get_genid:                        Methods_all.         (line 121)
* unur_get_stream:                       Output_streams.      (line  44)
* unur_get_strerror:                     Error_reporting.     (line  97)
* unur_get_urng:                         URNG.                (line 191)
* unur_get_urng_aux:                     URNG.                (line 227)
* unur_gibbs_chg_state:                  GIBBS.               (line 193)
* unur_gibbs_get_state:                  GIBBS.               (line 191)
* unur_gibbs_new:                        GIBBS.               (line 120)
* unur_gibbs_reset_state:                GIBBS.               (line 196)
* unur_gibbs_set_burnin:                 GIBBS.               (line 171)
* unur_gibbs_set_c:                      GIBBS.               (line 134)
* unur_gibbs_set_startingpoint:          GIBBS.               (line 150)
* unur_gibbs_set_thinning:               GIBBS.               (line 161)
* unur_gibbs_set_variant_coordinate:     GIBBS.               (line 124)
* unur_gibbs_set_variant_random_direction: GIBBS.             (line 131)
* unur_hinv_chg_truncated:               HINV.                (line 221)
* unur_hinv_estimate_error:              HINV.                (line 246)
* unur_hinv_eval_approxinvcdf:           HINV.                (line 209)
* unur_hinv_get_n_intervals:             HINV.                (line 203)
* unur_hinv_new:                         HINV.                (line 108)
* unur_hinv_set_boundary:                HINV.                (line 174)
* unur_hinv_set_cpoints:                 HINV.                (line 146)
* unur_hinv_set_guidefactor:             HINV.                (line 187)
* unur_hinv_set_max_intervals:           HINV.                (line 195)
* unur_hinv_set_order:                   HINV.                (line 111)
* unur_hinv_set_u_resolution:            HINV.                (line 130)
* unur_hist_new:                         HIST.                (line  33)
* unur_hitro_chg_state:                  HITRO.               (line 369)
* unur_hitro_get_state:                  HITRO.               (line 367)
* unur_hitro_new:                        HITRO.               (line 187)
* unur_hitro_reset_state:                HITRO.               (line 380)
* unur_hitro_set_adaptive_multiplier:    HITRO.               (line 311)
* unur_hitro_set_burnin:                 HITRO.               (line 352)
* unur_hitro_set_r:                      HITRO.               (line 263)
* unur_hitro_set_startingpoint:          HITRO.               (line 325)
* unur_hitro_set_thinning:               HITRO.               (line 339)
* unur_hitro_set_u:                      HITRO.               (line 287)
* unur_hitro_set_use_adaptiveline:       HITRO.               (line 206)
* unur_hitro_set_use_adaptiverectangle:  HITRO.               (line 235)
* unur_hitro_set_use_boundingrectangle:  HITRO.               (line 223)
* unur_hitro_set_v:                      HITRO.               (line 271)
* unur_hitro_set_variant_coordinate:     HITRO.               (line 191)
* unur_hitro_set_variant_random_direction: HITRO.             (line 202)
* unur_hrb_chg_verify:                   HRB.                 (line  69)
* unur_hrb_new:                          HRB.                 (line  59)
* unur_hrb_set_upperbound:               HRB.                 (line  63)
* unur_hrb_set_verify:                   HRB.                 (line  68)
* unur_hrd_chg_verify:                   HRD.                 (line  54)
* unur_hrd_new:                          HRD.                 (line  50)
* unur_hrd_set_verify:                   HRD.                 (line  53)
* unur_hri_chg_verify:                   HRI.                 (line  81)
* unur_hri_new:                          HRI.                 (line  68)
* unur_hri_set_p0:                       HRI.                 (line  71)
* unur_hri_set_verify:                   HRI.                 (line  80)
* UNUR_INFINITY:                         Math.                (line   8)
* unur_init:                             Methods_all.         (line  12)
* unur_itdr_chg_verify:                  ITDR.                (line 150)
* unur_itdr_get_area:                    ITDR.                (line 135)
* unur_itdr_get_cp:                      ITDR.                (line 130)
* unur_itdr_get_ct:                      ITDR.                (line 131)
* unur_itdr_get_xi:                      ITDR.                (line 129)
* unur_itdr_new:                         ITDR.                (line  97)
* unur_itdr_set_cp:                      ITDR.                (line 109)
* unur_itdr_set_ct:                      ITDR.                (line 119)
* unur_itdr_set_verify:                  ITDR.                (line 140)
* unur_itdr_set_xi:                      ITDR.                (line 100)
* unur_makegen_dsu:                      StringAPI.           (line  49)
* unur_makegen_ssu:                      StringAPI.           (line  47)
* unur_mcorr_chg_eigenvalues:            MCORR.               (line  93)
* unur_mcorr_new:                        MCORR.               (line  76)
* unur_mcorr_set_eigenvalues:            MCORR.               (line  80)
* unur_mixt_new:                         MIXT.                (line  61)
* unur_mixt_set_useinversion:            MIXT.                (line  70)
* unur_mvstd_new:                        MVSTD.               (line  41)
* unur_mvtdr_chg_verify:                 MVTDR.               (line 139)
* unur_mvtdr_get_hatvol:                 MVTDR.               (line 132)
* unur_mvtdr_get_ncones:                 MVTDR.               (line 128)
* unur_mvtdr_new:                        MVTDR.               (line  93)
* unur_mvtdr_set_boundsplitting:         MVTDR.               (line 104)
* unur_mvtdr_set_maxcones:               MVTDR.               (line 114)
* unur_mvtdr_set_stepsmin:               MVTDR.               (line  97)
* unur_mvtdr_set_verify:                 MVTDR.               (line 137)
* unur_ninv_chg_max_iter:                NINV.                (line 129)
* unur_ninv_chg_start:                   NINV.                (line 170)
* unur_ninv_chg_table:                   NINV.                (line 189)
* unur_ninv_chg_truncated:               NINV.                (line 193)
* unur_ninv_chg_u_resolution:            NINV.                (line 144)
* unur_ninv_chg_x_resolution:            NINV.                (line 135)
* unur_ninv_eval_approxinvcdf:           NINV.                (line 213)
* unur_ninv_new:                         NINV.                (line 107)
* unur_ninv_set_max_iter:                NINV.                (line 127)
* unur_ninv_set_start:                   NINV.                (line 151)
* unur_ninv_set_table:                   NINV.                (line 176)
* unur_ninv_set_u_resolution:            NINV.                (line 142)
* unur_ninv_set_usebisect:               NINV.                (line 122)
* unur_ninv_set_usenewton:               NINV.                (line 114)
* unur_ninv_set_useregula:               NINV.                (line 110)
* unur_ninv_set_x_resolution:            NINV.                (line 133)
* unur_norta_new:                        NORTA.               (line  77)
* unur_nrou_chg_verify:                  NROU.                (line 151)
* unur_nrou_new:                         NROU.                (line  97)
* unur_nrou_set_center:                  NROU.                (line 134)
* unur_nrou_set_r:                       NROU.                (line 126)
* unur_nrou_set_u:                       NROU.                (line 101)
* unur_nrou_set_v:                       NROU.                (line 117)
* unur_nrou_set_verify:                  NROU.                (line 141)
* unur_pinv_estimate_error:              PINV.                (line 358)
* unur_pinv_eval_approxcdf:              PINV.                (line 350)
* unur_pinv_eval_approxinvcdf:           PINV.                (line 342)
* unur_pinv_get_n_intervals:             PINV.                (line 324)
* unur_pinv_new:                         PINV.                (line 167)
* unur_pinv_set_boundary:                PINV.                (line 281)
* unur_pinv_set_keepcdf:                 PINV.                (line 329)
* unur_pinv_set_max_intervals:           PINV.                (line 318)
* unur_pinv_set_order:                   PINV.                (line 170)
* unur_pinv_set_searchboundary:          PINV.                (line 297)
* unur_pinv_set_smoothness:              PINV.                (line 177)
* unur_pinv_set_u_resolution:            PINV.                (line 225)
* unur_pinv_set_use_upoints:             PINV.                (line 253)
* unur_pinv_set_usecdf:                  PINV.                (line 267)
* unur_pinv_set_usepdf:                  PINV.                (line 262)
* unur_quantile:                         Methods_all.         (line  80)
* unur_reinit:                           Methods_all.         (line  25)
* unur_reset_errno:                      Error_reporting.     (line  93)
* unur_run_tests:                        Testing.             (line  15)
* unur_sample_cont:                      Methods_all.         (line  61)
* unur_sample_discr:                     Methods_all.         (line  60)
* unur_sample_matr:                      Methods_all.         (line  65)
* unur_sample_urng:                      URNG.                (line 243)
* unur_sample_vec:                       Methods_all.         (line  63)
* unur_set_debug:                        Debug.               (line  69)
* unur_set_default_debug:                Debug.               (line  75)
* unur_set_default_urng:                 URNG.                (line 164)
* unur_set_default_urng_aux:             URNG.                (line 168)
* unur_set_error_handler:                Error_handlers.      (line  50)
* unur_set_error_handler_off:            Error_handlers.      (line  61)
* unur_set_stream:                       Output_streams.      (line  29)
* unur_set_urng:                         URNG.                (line 175)
* unur_set_urng_aux:                     URNG.                (line 196)
* unur_set_use_distr_privatecopy:        Methods_all.         (line 140)
* unur_srou_chg_cdfatmode:               SROU.                (line 185)
* unur_srou_chg_pdfatmode:               SROU.                (line 190)
* unur_srou_chg_verify:                  SROU.                (line 175)
* unur_srou_new:                         SROU.                (line 108)
* unur_srou_set_cdfatmode:               SROU.                (line 127)
* unur_srou_set_pdfatmode:               SROU.                (line 136)
* unur_srou_set_r:                       SROU.                (line 111)
* unur_srou_set_usemirror:               SROU.                (line 159)
* unur_srou_set_usesqueeze:              SROU.                (line 147)
* unur_srou_set_verify:                  SROU.                (line 174)
* unur_ssr_chg_cdfatmode:                SSR.                 (line 128)
* unur_ssr_chg_pdfatmode:                SSR.                 (line 133)
* unur_ssr_chg_verify:                   SSR.                 (line 118)
* unur_ssr_new:                          SSR.                 (line  85)
* unur_ssr_set_cdfatmode:                SSR.                 (line  89)
* unur_ssr_set_pdfatmode:                SSR.                 (line  98)
* unur_ssr_set_usesqueeze:               SSR.                 (line 108)
* unur_ssr_set_verify:                   SSR.                 (line 117)
* unur_str2distr:                        StringAPI.           (line  40)
* unur_str2gen:                          StringAPI.           (line  35)
* UNUR_SUCCESS (0x0u):                   Errno.               (line  10)
* unur_tabl_chg_truncated:               TABL.                (line 293)
* unur_tabl_chg_verify:                  TABL.                (line 325)
* unur_tabl_get_hatarea:                 TABL.                (line 236)
* unur_tabl_get_n_intervals:             TABL.                (line 252)
* unur_tabl_get_sqhratio:                TABL.                (line 232)
* unur_tabl_get_squeezearea:             TABL.                (line 241)
* unur_tabl_new:                         TABL.                (line 119)
* unur_tabl_set_areafraction:            TABL.                (line 162)
* unur_tabl_set_boundary:                TABL.                (line 284)
* unur_tabl_set_cpoints:                 TABL.                (line 135)
* unur_tabl_set_darsfactor:              TABL.                (line 190)
* unur_tabl_set_guidefactor:             TABL.                (line 276)
* unur_tabl_set_max_intervals:           TABL.                (line 246)
* unur_tabl_set_max_sqhratio:            TABL.                (line 218)
* unur_tabl_set_nstp:                    TABL.                (line 142)
* unur_tabl_set_pedantic:                TABL.                (line 335)
* unur_tabl_set_slopes:                  TABL.                (line 257)
* unur_tabl_set_usedars:                 TABL.                (line 174)
* unur_tabl_set_useear:                  TABL.                (line 152)
* unur_tabl_set_variant_ia:              TABL.                (line 123)
* unur_tabl_set_variant_splitmode:       TABL.                (line 202)
* unur_tabl_set_verify:                  TABL.                (line 324)
* unur_tdr_chg_reinit_ncpoints:          TDR.                 (line 211)
* unur_tdr_chg_reinit_percentiles:       TDR.                 (line 194)
* unur_tdr_chg_truncated:                TDR.                 (line 219)
* unur_tdr_chg_verify:                   TDR.                 (line 307)
* unur_tdr_eval_invcdfhat:               TDR.                 (line 339)
* unur_tdr_get_hatarea:                  TDR.                 (line 263)
* unur_tdr_get_sqhratio:                 TDR.                 (line 259)
* unur_tdr_get_squeezearea:              TDR.                 (line 268)
* unur_tdr_new:                          TDR.                 (line 108)
* unur_tdr_set_c:                        TDR.                 (line 111)
* unur_tdr_set_cpoints:                  TDR.                 (line 184)
* unur_tdr_set_darsfactor:               TDR.                 (line 172)
* unur_tdr_set_guidefactor:              TDR.                 (line 299)
* unur_tdr_set_max_intervals:            TDR.                 (line 273)
* unur_tdr_set_max_sqhratio:             TDR.                 (line 248)
* unur_tdr_set_pedantic:                 TDR.                 (line 317)
* unur_tdr_set_reinit_ncpoints:          TDR.                 (line 209)
* unur_tdr_set_reinit_percentiles:       TDR.                 (line 192)
* unur_tdr_set_usecenter:                TDR.                 (line 282)
* unur_tdr_set_usedars:                  TDR.                 (line 131)
* unur_tdr_set_usemode:                  TDR.                 (line 286)
* unur_tdr_set_variant_gw:               TDR.                 (line 118)
* unur_tdr_set_variant_ia:               TDR.                 (line 126)
* unur_tdr_set_variant_ps:               TDR.                 (line 122)
* unur_tdr_set_verify:                   TDR.                 (line 306)
* unur_test_chi2:                        Testing.             (line 161)
* unur_test_correlation:                 Testing.             (line 216)
* unur_test_count_pdf:                   Testing.             (line 135)
* unur_test_count_urn:                   Testing.             (line 123)
* unur_test_moments:                     Testing.             (line 200)
* unur_test_par_count_pdf:               Testing.             (line 153)
* unur_test_printsample:                 Testing.             (line  38)
* unur_test_quartiles:                   Testing.             (line 226)
* unur_test_timing:                      Testing.             (line  44)
* unur_test_timing_exponential:          Testing.             (line  99)
* unur_test_timing_R:                    Testing.             (line  71)
* unur_test_timing_total:                Testing.             (line 106)
* unur_test_timing_uniform:              Testing.             (line  97)
* unur_test_u_error:                     Testing.             (line 250)
* unur_unif_new:                         UNIF.                (line  21)
* unur_urng_anti:                        URNG.                (line 303)
* unur_urng_free:                        URNG.                (line 372)
* unur_urng_fvoid_new:                   URNG-FVOID.          (line  51)
* unur_urng_gsl_new:                     URNG-GSL.            (line 112)
* unur_urng_gslptr_new:                  URNG-GSL.            (line 118)
* unur_urng_gslqrng_new:                 URNG-GSLQRNG.        (line  44)
* unur_urng_new:                         URNG.                (line 354)
* unur_urng_nextsub:                     URNG.                (line 310)
* unur_urng_prng_new:                    URNG-PRNG.           (line  46)
* unur_urng_prngptr_new:                 URNG-PRNG.           (line  63)
* unur_urng_randomshift_new:             URNG-RANDOMSHIFT.    (line  56)
* unur_urng_randomshift_nextshift:       URNG-RANDOMSHIFT.    (line  65)
* unur_urng_reset:                       URNG.                (line 264)
* unur_urng_resetsub:                    URNG.                (line 317)
* unur_urng_rngstream_new:               URNG-RNGSTREAM.      (line  57)
* unur_urng_rngstreamptr_new:            URNG-RNGSTREAM.      (line  63)
* unur_urng_sample:                      URNG.                (line 239)
* unur_urng_sample_array:                URNG.                (line 249)
* unur_urng_seed:                        URNG.                (line 287)
* unur_urng_set_anti:                    URNG.                (line 399)
* unur_urng_set_delete:                  URNG.                (line 419)
* unur_urng_set_nextsub:                 URNG.                (line 409)
* unur_urng_set_reset:                   URNG.                (line 404)
* unur_urng_set_resetsub:                URNG.                (line 414)
* unur_urng_set_sample_array:            URNG.                (line 386)
* unur_urng_set_seed:                    URNG.                (line 395)
* unur_urng_set_sync:                    URNG.                (line 391)
* unur_urng_sync:                        URNG.                (line 281)
* unur_use_urng_aux_default:             URNG.                (line 206)
* unur_utdr_chg_pdfatmode:               UTDR.                (line 105)
* unur_utdr_chg_verify:                  UTDR.                (line  95)
* unur_utdr_new:                         UTDR.                (line  62)
* unur_utdr_set_cpfactor:                UTDR.                (line  76)
* unur_utdr_set_deltafactor:             UTDR.                (line  85)
* unur_utdr_set_pdfatmode:               UTDR.                (line  66)
* unur_utdr_set_verify:                  UTDR.                (line  94)
* unur_vempk_chg_smoothing:              VEMPK.               (line  58)
* unur_vempk_chg_varcor:                 VEMPK.               (line  74)
* unur_vempk_new:                        VEMPK.               (line  52)
* unur_vempk_set_smoothing:              VEMPK.               (line  56)
* unur_vempk_set_varcor:                 VEMPK.               (line  72)
* unur_vnrou_chg_u:                      VNROU.               (line 130)
* unur_vnrou_chg_v:                      VNROU.               (line 140)
* unur_vnrou_chg_verify:                 VNROU.               (line 163)
* unur_vnrou_get_volumehat:              VNROU.               (line 167)
* unur_vnrou_new:                        VNROU.               (line 109)
* unur_vnrou_set_r:                      VNROU.               (line 143)
* unur_vnrou_set_u:                      VNROU.               (line 113)
* unur_vnrou_set_v:                      VNROU.               (line 133)
* unur_vnrou_set_verify:                 VNROU.               (line 152)



Tag Table:
Node: Top451
Node: Intro6524
Node: UsageDoc6801
Node: Installation8213
Node: UsageLib14884
Node: Concepts17825
Node: Contact28761
Node: Examples29105
Node: Example_030911
Node: Example_0_str34106
Node: Example_136584
Node: Example_1_str39857
Node: Example_242405
Node: Example_2_str47705
Node: Example_351096
Node: Example_3_str54999
Node: Example_458197
Node: Example_anti64144
Node: Example_anti_str70887
Node: Example_More75260
Node: StringAPI75708
Ref: funct:unur_str2gen76939
Ref: funct:unur_str2distr77201
Ref: funct:unur_makegen_ssu77525
Ref: funct:unur_makegen_dsu77639
Node: StringSyntax78405
Node: StringDistr83358
Node: KeysDistr85133
Node: StringFunct90827
Node: StringMethod95467
Node: KeysMethod96535
Node: StringURNG113842
Node: Distribution_objects114566
Node: AllDistr119785
Ref: funct:unur_distr_free120305
Ref: funct:unur_distr_set_name120406
Ref: funct:unur_distr_get_name120499
Ref: funct:unur_distr_get_dim120842
Ref: funct:unur_distr_get_type121291
Ref: funct:unur_distr_is_cont121964
Ref: funct:unur_distr_is_cvec122104
Ref: funct:unur_distr_is_cemp122246
Ref: funct:unur_distr_is_cvemp122417
Ref: funct:unur_distr_is_discr122576
Ref: funct:unur_distr_is_matr122715
Ref: funct:unur_distr_set_extobj122840
Ref: funct:unur_distr_get_extobj123794
Node: CONT124013
Ref: funct:unur_distr_cont_new127170
Ref: funct:unur_distr_cont_set_pdf127340
Ref: funct:unur_distr_cont_set_dpdf127441
Ref: funct:unur_distr_cont_set_cdf127544
Ref: funct:unur_distr_cont_set_invcdf127645
Ref: funct:unur_distr_cont_get_pdf129920
Ref: funct:unur_distr_cont_get_dpdf130018
Ref: funct:unur_distr_cont_get_cdf130117
Ref: funct:unur_distr_cont_get_invcdf130215
Ref: funct:unur_distr_cont_eval_pdf130634
Ref: funct:unur_distr_cont_eval_dpdf130733
Ref: funct:unur_distr_cont_eval_cdf130833
Ref: funct:unur_distr_cont_eval_invcdf130932
Ref: funct:unur_distr_cont_set_logpdf131522
Ref: funct:unur_distr_cont_set_dlogpdf131629
Ref: funct:unur_distr_cont_set_logcdf131738
Ref: funct:unur_distr_cont_get_logpdf131845
Ref: funct:unur_distr_cont_get_dlogpdf131946
Ref: funct:unur_distr_cont_get_logcdf132048
Ref: funct:unur_distr_cont_eval_logpdf132149
Ref: funct:unur_distr_cont_eval_dlogpdf132251
Ref: funct:unur_distr_cont_eval_logcdf132354
Ref: funct:unur_distr_cont_set_pdfstr132540
Ref: funct:unur_distr_cont_set_cdfstr133134
Ref: funct:unur_distr_cont_get_pdfstr133435
Ref: funct:unur_distr_cont_get_dpdfstr133525
Ref: funct:unur_distr_cont_get_cdfstr133616
Ref: funct:unur_distr_cont_set_pdfparams133968
Ref: funct:unur_distr_cont_get_pdfparams135743
Ref: funct:unur_distr_cont_set_pdfparams_vec136114
Ref: funct:unur_distr_cont_get_pdfparams_vec136995
Ref: funct:unur_distr_cont_set_logpdfstr137452
Ref: funct:unur_distr_cont_get_logpdfstr137560
Ref: funct:unur_distr_cont_get_dlogpdfstr137653
Ref: funct:unur_distr_cont_set_logcdfstr137747
Ref: funct:unur_distr_cont_get_logcdfstr137855
Ref: funct:unur_distr_cont_set_domain138036
Ref: funct:unur_distr_cont_get_domain138981
Ref: funct:unur_distr_cont_get_truncated139285
Ref: funct:unur_distr_cont_set_hr139743
Ref: funct:unur_distr_cont_get_hr141274
Ref: funct:unur_distr_cont_eval_hr141624
Ref: funct:unur_distr_cont_set_hrstr141980
Ref: funct:unur_distr_cont_get_hrstr142511
Ref: funct:unur_distr_cont_set_mode142999
Ref: funct:unur_distr_cont_upd_mode143562
Ref: funct:unur_distr_cont_get_mode143986
Ref: funct:unur_distr_cont_set_center144472
Ref: funct:unur_distr_cont_get_center144991
Ref: funct:unur_distr_cont_set_pdfarea145242
Ref: funct:unur_distr_cont_upd_pdfarea145679
Ref: funct:unur_distr_cont_get_pdfarea146387
Node: CORDER146732
Ref: funct:unur_distr_corder_new147252
Ref: funct:unur_distr_corder_get_distribution148100
Ref: funct:unur_distr_corder_set_rank148323
Ref: funct:unur_distr_corder_get_rank148663
Ref: funct:unur_distr_corder_get_pdf149126
Ref: funct:unur_distr_corder_get_dpdf149220
Ref: funct:unur_distr_corder_get_cdf149315
Ref: funct:unur_distr_corder_eval_pdf149767
Ref: funct:unur_distr_corder_eval_dpdf149862
Ref: funct:unur_distr_corder_eval_cdf149958
Ref: funct:unur_distr_corder_set_pdfparams150572
Ref: funct:unur_distr_corder_get_pdfparams150812
Ref: funct:unur_distr_corder_set_domain151105
Ref: funct:unur_distr_corder_get_domain151348
Ref: funct:unur_distr_corder_get_truncated151593
Ref: funct:unur_distr_corder_set_mode152059
Ref: funct:unur_distr_corder_upd_mode152239
Ref: funct:unur_distr_corder_get_mode152534
Ref: funct:unur_distr_corder_set_pdfarea152710
Ref: funct:unur_distr_corder_upd_pdfarea152904
Ref: funct:unur_distr_corder_get_pdfarea153530
Node: CEMP153734
Ref: funct:unur_distr_cemp_new154383
Ref: funct:unur_distr_cemp_set_data154568
Ref: funct:unur_distr_cemp_read_data154738
Ref: funct:unur_distr_cemp_get_data155286
Ref: funct:unur_distr_cemp_set_hist155626
Ref: funct:unur_distr_cemp_set_hist_prob156397
Ref: funct:unur_distr_cemp_set_hist_domain157127
Ref: funct:unur_distr_cemp_set_hist_bins157383
Node: CVEC158032
Ref: funct:unur_distr_cvec_new160387
Ref: funct:unur_distr_cvec_set_pdf160951
Ref: funct:unur_distr_cvec_set_dpdf161739
Ref: funct:unur_distr_cvec_set_pdpdf162660
Ref: funct:unur_distr_cvec_get_pdf163464
Ref: funct:unur_distr_cvec_get_dpdf163808
Ref: funct:unur_distr_cvec_eval_pdf164190
Ref: funct:unur_distr_cvec_eval_dpdf164775
Ref: funct:unur_distr_cvec_eval_pdpdf165411
Ref: funct:unur_distr_cvec_set_logpdf166128
Ref: funct:unur_distr_cvec_set_dlogpdf166235
Ref: funct:unur_distr_cvec_set_pdlogpdf166345
Ref: funct:unur_distr_cvec_get_logpdf166457
Ref: funct:unur_distr_cvec_get_dlogpdf166558
Ref: funct:unur_distr_cvec_eval_logpdf166661
Ref: funct:unur_distr_cvec_eval_dlogpdf166764
Ref: funct:unur_distr_cvec_eval_pdlogpdf166881
Ref: funct:unur_distr_cvec_set_mean167062
Ref: funct:unur_distr_cvec_get_mean167756
Ref: funct:unur_distr_cvec_set_covar168168
Ref: funct:unur_distr_cvec_set_covar_inv170367
Ref: funct:unur_distr_cvec_get_covar171435
Ref: funct:unur_distr_cvec_get_cholesky171532
Ref: funct:unur_distr_cvec_get_covar_inv171632
Ref: funct:unur_distr_cvec_set_rankcorr172290
Ref: funct:unur_distr_cvec_get_rankcorr173514
Ref: funct:unur_distr_cvec_get_rk_cholesky173614
Ref: funct:unur_distr_cvec_set_marginals174180
Ref: funct:unur_distr_cvec_set_marginal_array174581
Ref: funct:unur_distr_cvec_set_marginal_list175202
Ref: funct:unur_distr_cvec_get_marginal176324
Ref: funct:unur_distr_cvec_set_pdfparams176726
Ref: funct:unur_distr_cvec_get_pdfparams178174
Ref: funct:unur_distr_cvec_set_pdfparams_vec178545
Ref: funct:unur_distr_cvec_get_pdfparams_vec180143
Ref: funct:unur_distr_cvec_set_domain_rect180600
Ref: funct:unur_distr_cvec_is_indomain181795
Ref: funct:unur_distr_cvec_set_mode182160
Ref: funct:unur_distr_cvec_upd_mode182459
Ref: funct:unur_distr_cvec_get_mode182796
Ref: funct:unur_distr_cvec_set_center183382
Ref: funct:unur_distr_cvec_get_center184315
Ref: funct:unur_distr_cvec_set_pdfvol184730
Ref: funct:unur_distr_cvec_upd_pdfvol184958
Ref: funct:unur_distr_cvec_get_pdfvol185438
Node: CONDI185786
Ref: funct:unur_distr_condi_new187293
Ref: funct:unur_distr_condi_set_condition189000
Ref: funct:unur_distr_condi_get_condition190244
Ref: funct:unur_distr_condi_get_distribution190672
Node: CVEMP190851
Ref: funct:unur_distr_cvemp_new191333
Ref: funct:unur_distr_cvemp_set_data191749
Ref: funct:unur_distr_cvemp_read_data192228
Ref: funct:unur_distr_cvemp_get_data192904
Node: MATR193455
Ref: funct:unur_distr_matr_new193784
Ref: funct:unur_distr_matr_get_dim194535
Node: DISCR194813
Ref: funct:unur_distr_discr_new196187
Ref: funct:unur_distr_discr_set_pv196942
Ref: funct:unur_distr_discr_make_pv197767
Ref: funct:unur_distr_discr_get_pv198868
Ref: funct:unur_distr_discr_set_pmf199194
Ref: funct:unur_distr_discr_set_cdf199297
Ref: funct:unur_distr_discr_set_invcdf200407
Ref: funct:unur_distr_discr_eval_pv200695
Ref: funct:unur_distr_discr_eval_pmf200791
Ref: funct:unur_distr_discr_eval_cdf200888
Ref: funct:unur_distr_discr_eval_invcdf201551
Ref: funct:unur_distr_discr_set_pmfstr202064
Ref: funct:unur_distr_discr_set_cdfstr202577
Ref: funct:unur_distr_discr_get_pmfstr202802
Ref: funct:unur_distr_discr_get_cdfstr202893
Ref: funct:unur_distr_discr_set_pmfparams203211
Ref: funct:unur_distr_discr_get_pmfparams204450
Ref: funct:unur_distr_discr_set_domain204764
Ref: funct:unur_distr_discr_get_domain205532
Ref: funct:unur_distr_discr_set_mode206108
Ref: funct:unur_distr_discr_upd_mode206231
Ref: funct:unur_distr_discr_get_mode206693
Ref: funct:unur_distr_discr_set_pmfsum207172
Ref: funct:unur_distr_discr_upd_pmfsum207604
Ref: funct:unur_distr_discr_get_pmfsum208386
Node: Methods208723
Node: Methods_all211360
Ref: funct:unur_init211583
Ref: funct:unur_reinit212099
Ref: funct:unur_sample_discr213510
Ref: funct:unur_sample_cont213571
Ref: funct:unur_sample_vec213631
Ref: funct:unur_sample_matr213716
Ref: funct:unur_quantile214398
Ref: funct:unur_free215161
Ref: funct:unur_gen_info215262
Ref: funct:unur_get_dimension215677
Ref: funct:unur_get_genid215861
Ref: funct:unur_get_distr215973
Ref: funct:unur_set_use_distr_privatecopy216771
Node: AUTO218945
Ref: funct:unur_auto_new220073
Ref: funct:unur_auto_set_logss220188
Node: Methods_for_CONT220524
Node: AROU230531
Ref: funct:unur_arou_new232138
Ref: funct:unur_arou_set_usedars232253
Ref: funct:unur_arou_set_darsfactor233061
Ref: funct:unur_arou_set_max_sqhratio233675
Ref: funct:unur_arou_get_sqhratio234259
Ref: funct:unur_arou_get_hatarea234487
Ref: funct:unur_arou_get_squeezearea234667
Ref: funct:unur_arou_set_max_segments234865
Ref: funct:unur_arou_set_cpoints235124
Ref: funct:unur_arou_set_usecenter235513
Ref: funct:unur_arou_set_guidefactor235667
Ref: funct:unur_arou_set_verify235990
Ref: funct:unur_arou_chg_verify236074
Ref: funct:unur_arou_set_pedantic236476
Node: ARS237525
Ref: funct:unur_ars_new240591
Ref: funct:unur_ars_set_max_intervals240705
Ref: funct:unur_ars_set_cpoints241063
Ref: funct:unur_ars_set_reinit_percentiles241486
Ref: funct:unur_ars_chg_reinit_percentiles241615
Ref: funct:unur_ars_set_reinit_ncpoints242556
Ref: funct:unur_ars_chg_reinit_ncpoints242650
Ref: funct:unur_ars_set_max_iter242971
Ref: funct:unur_ars_set_verify243169
Ref: funct:unur_ars_chg_verify243242
Ref: funct:unur_ars_set_pedantic243643
Ref: funct:unur_ars_get_loghatarea244693
Ref: funct:unur_ars_eval_invcdfhat244888
Node: CEXT245301
Ref: funct:unur_cext_new253177
Ref: funct:unur_cext_set_init253296
Ref: funct:unur_cext_set_sample253897
Ref: funct:unur_cext_get_params254375
Ref: funct:unur_cext_get_distrparams254989
Ref: funct:unur_cext_get_ndistrparams255059
Node: CSTD255362
Ref: funct:unur_cstd_new257713
Ref: funct:unur_cstd_set_variant258408
Ref: funct:unur_cstd_chg_truncated259009
Node: HINV260123
Ref: funct:unur_hinv_new265120
Ref: funct:unur_hinv_set_order265235
Ref: funct:unur_hinv_set_u_resolution266188
Ref: funct:unur_hinv_set_cpoints266960
Ref: funct:unur_hinv_set_boundary268453
Ref: funct:unur_hinv_set_guidefactor269025
Ref: funct:unur_hinv_set_max_intervals269348
Ref: funct:unur_hinv_get_n_intervals269729
Ref: funct:unur_hinv_eval_approxinvcdf270012
Ref: funct:unur_hinv_chg_truncated270580
Ref: funct:unur_hinv_estimate_error271812
Node: HRB272213
Ref: funct:unur_hrb_new274141
Ref: funct:unur_hrb_set_upperbound274255
Ref: funct:unur_hrb_set_verify274550
Ref: funct:unur_hrb_chg_verify274623
Node: HRD274897
Ref: funct:unur_hrd_new276445
Ref: funct:unur_hrd_set_verify276559
Ref: funct:unur_hrd_chg_verify276632
Node: HRI276906
Ref: funct:unur_hri_new279516
Ref: funct:unur_hri_set_p0279630
Ref: funct:unur_hri_set_verify280080
Ref: funct:unur_hri_chg_verify280153
Node: ITDR280427
Ref: funct:unur_itdr_new285019
Ref: funct:unur_itdr_set_xi285134
Ref: funct:unur_itdr_set_cp285549
Ref: funct:unur_itdr_set_ct285996
Ref: funct:unur_itdr_get_xi286478
Ref: funct:unur_itdr_get_cp286538
Ref: funct:unur_itdr_get_ct286598
Ref: funct:unur_itdr_get_area286785
Ref: funct:unur_itdr_set_verify286930
Ref: funct:unur_itdr_chg_verify287330
Node: NINV287466
Ref: funct:unur_ninv_new292164
Ref: funct:unur_ninv_set_useregula292279
Ref: funct:unur_ninv_set_usenewton292436
Ref: funct:unur_ninv_set_usebisect292878
Ref: funct:unur_ninv_set_max_iter293049
Ref: funct:unur_ninv_chg_max_iter293137
Ref: funct:unur_ninv_set_x_resolution293294
Ref: funct:unur_ninv_chg_x_resolution293393
Ref: funct:unur_ninv_set_u_resolution293654
Ref: funct:unur_ninv_chg_u_resolution293753
Ref: funct:unur_ninv_set_start294023
Ref: funct:unur_ninv_chg_start294712
Ref: funct:unur_ninv_set_table294964
Ref: funct:unur_ninv_chg_table295522
Ref: funct:unur_ninv_chg_truncated295658
Ref: funct:unur_ninv_eval_approxinvcdf296645
Node: NROU297211
Ref: funct:unur_nrou_new300887
Ref: funct:unur_nrou_set_u301002
Ref: funct:unur_nrou_set_v301680
Ref: funct:unur_nrou_set_r302008
Ref: funct:unur_nrou_set_center302216
Ref: funct:unur_nrou_set_verify302461
Ref: funct:unur_nrou_chg_verify302861
Node: PINV302997
Ref: funct:unur_pinv_new310797
Ref: funct:unur_pinv_set_order310912
Ref: funct:unur_pinv_set_smoothness311146
Ref: funct:unur_pinv_set_u_resolution313492
Ref: funct:unur_pinv_set_use_upoints314929
Ref: funct:unur_pinv_set_usepdf315365
Ref: funct:unur_pinv_set_usecdf315519
Ref: funct:unur_pinv_set_boundary316113
Ref: funct:unur_pinv_set_searchboundary316876
Ref: funct:unur_pinv_set_max_intervals317834
Ref: funct:unur_pinv_get_n_intervals318050
Ref: funct:unur_pinv_set_keepcdf318242
Ref: funct:unur_pinv_eval_approxinvcdf318889
Ref: funct:unur_pinv_eval_approxcdf319288
Ref: funct:unur_pinv_estimate_error319722
Node: SROU320112
Ref: funct:unur_srou_new325036
Ref: funct:unur_srou_set_r325151
Ref: funct:unur_srou_set_cdfatmode325763
Ref: funct:unur_srou_set_pdfatmode326109
Ref: funct:unur_srou_set_usesqueeze326626
Ref: funct:unur_srou_set_usemirror327069
Ref: funct:unur_srou_set_verify327774
Ref: funct:unur_srou_chg_verify327858
Ref: funct:unur_srou_chg_cdfatmode328260
Ref: funct:unur_srou_chg_pdfatmode328469
Node: SSR328678
Ref: funct:unur_ssr_new332113
Ref: funct:unur_ssr_set_cdfatmode332227
Ref: funct:unur_ssr_set_pdfatmode332571
Ref: funct:unur_ssr_set_usesqueeze332996
Ref: funct:unur_ssr_set_verify333396
Ref: funct:unur_ssr_chg_verify333469
Ref: funct:unur_ssr_chg_cdfatmode333870
Ref: funct:unur_ssr_chg_pdfatmode334078
Node: TABL334286
Ref: funct:unur_tabl_new339846
Ref: funct:unur_tabl_set_variant_ia339961
Ref: funct:unur_tabl_set_cpoints340451
Ref: funct:unur_tabl_set_nstp340801
Ref: funct:unur_tabl_set_useear341214
Ref: funct:unur_tabl_set_areafraction341671
Ref: funct:unur_tabl_set_usedars342177
Ref: funct:unur_tabl_set_darsfactor342946
Ref: funct:unur_tabl_set_variant_splitmode343560
Ref: funct:unur_tabl_set_max_sqhratio344062
Ref: funct:unur_tabl_get_sqhratio344772
Ref: funct:unur_tabl_get_hatarea344988
Ref: funct:unur_tabl_get_squeezearea345168
Ref: funct:unur_tabl_set_max_intervals345366
Ref: funct:unur_tabl_get_n_intervals345629
Ref: funct:unur_tabl_set_slopes345787
Ref: funct:unur_tabl_set_guidefactor346733
Ref: funct:unur_tabl_set_boundary347056
Ref: funct:unur_tabl_chg_truncated347459
Ref: funct:unur_tabl_set_verify349028
Ref: funct:unur_tabl_chg_verify349112
Ref: funct:unur_tabl_set_pedantic349514
Node: TDR350021
Ref: funct:unur_tdr_new353711
Ref: funct:unur_tdr_set_c353825
Ref: funct:unur_tdr_set_variant_gw354074
Ref: funct:unur_tdr_set_variant_ps354250
Ref: funct:unur_tdr_set_variant_ia354437
Ref: funct:unur_tdr_set_usedars354637
Ref: funct:unur_tdr_set_darsfactor356714
Ref: funct:unur_tdr_set_cpoints357330
Ref: funct:unur_tdr_set_reinit_percentiles357669
Ref: funct:unur_tdr_chg_reinit_percentiles357798
Ref: funct:unur_tdr_set_reinit_ncpoints358739
Ref: funct:unur_tdr_chg_reinit_ncpoints358833
Ref: funct:unur_tdr_chg_truncated359154
Ref: funct:unur_tdr_set_max_sqhratio360640
Ref: funct:unur_tdr_get_sqhratio361211
Ref: funct:unur_tdr_get_hatarea361426
Ref: funct:unur_tdr_get_squeezearea361605
Ref: funct:unur_tdr_set_max_intervals361802
Ref: funct:unur_tdr_set_usecenter362160
Ref: funct:unur_tdr_set_usemode362312
Ref: funct:unur_tdr_set_guidefactor362950
Ref: funct:unur_tdr_set_verify363270
Ref: funct:unur_tdr_chg_verify363343
Ref: funct:unur_tdr_set_pedantic363744
Ref: funct:unur_tdr_eval_invcdfhat364788
Node: UTDR365801
Ref: funct:unur_utdr_new368028
Ref: funct:unur_utdr_set_pdfatmode368143
Ref: funct:unur_utdr_set_cpfactor368569
Ref: funct:unur_utdr_set_deltafactor368924
Ref: funct:unur_utdr_set_verify369272
Ref: funct:unur_utdr_chg_verify369356
Ref: funct:unur_utdr_chg_pdfatmode369758
Node: Methods_for_CEMP369967
Node: EMPK375743
Ref: funct:unur_empk_new380039
Ref: funct:unur_empk_set_kernel380154
Ref: funct:unur_empk_set_kernelgen380956
Ref: funct:unur_empk_set_beta382222
Ref: funct:unur_empk_set_smoothing382663
Ref: funct:unur_empk_chg_smoothing382756
Ref: funct:unur_empk_set_varcor383468
Ref: funct:unur_empk_chg_varcor383552
Ref: funct:unur_empk_set_positive383890
Node: EMPL384138
Ref: funct:unur_empl_new385885
Node: HIST386000
Ref: funct:unur_hist_new386779
Node: Methods_for_CVEC386894
Node: MVSTD387633
Ref: funct:unur_mvstd_new388928
Node: MVTDR389287
Ref: funct:unur_mvtdr_new392775
Ref: funct:unur_mvtdr_set_stepsmin392883
Ref: funct:unur_mvtdr_set_boundsplitting393098
Ref: funct:unur_mvtdr_set_maxcones393566
Ref: funct:unur_mvtdr_get_ncones394160
Ref: funct:unur_mvtdr_get_hatvol394346
Ref: funct:unur_mvtdr_set_verify394528
Ref: funct:unur_mvtdr_chg_verify394613
Node: NORTA395026
Ref: funct:unur_norta_new397804
Node: VNROU397920
Ref: funct:unur_vnrou_new402537
Ref: funct:unur_vnrou_set_u402653
Ref: funct:unur_vnrou_chg_u403403
Ref: funct:unur_vnrou_set_v403566
Ref: funct:unur_vnrou_chg_v403905
Ref: funct:unur_vnrou_set_r404033
Ref: funct:unur_vnrou_set_verify404260
Ref: funct:unur_vnrou_chg_verify404660
Ref: funct:unur_vnrou_get_volumehat404807
Node: MCMC_Methods_for_CVEC405120
Node: GIBBS406022
Ref: funct:unur_gibbs_new411123
Ref: funct:unur_gibbs_set_variant_coordinate411277
Ref: funct:unur_gibbs_set_variant_random_direction411482
Ref: funct:unur_gibbs_set_c411644
Ref: funct:unur_gibbs_set_startingpoint412292
Ref: funct:unur_gibbs_set_thinning412816
Ref: funct:unur_gibbs_set_burnin413133
Ref: funct:unur_gibbs_get_state414033
Ref: funct:unur_gibbs_chg_state414104
Ref: funct:unur_gibbs_reset_state414255
Node: HITRO414599
Ref: funct:unur_hitro_new422981
Ref: funct:unur_hitro_set_variant_coordinate423097
Ref: funct:unur_hitro_set_variant_random_direction423454
Ref: funct:unur_hitro_set_use_adaptiveline423616
Ref: funct:unur_hitro_set_use_boundingrectangle424314
Ref: funct:unur_hitro_set_use_adaptiverectangle424834
Ref: funct:unur_hitro_set_r426259
Ref: funct:unur_hitro_set_v426486
Ref: funct:unur_hitro_set_u427158
Ref: funct:unur_hitro_set_adaptive_multiplier428192
Ref: funct:unur_hitro_set_startingpoint428818
Ref: funct:unur_hitro_set_thinning429455
Ref: funct:unur_hitro_set_burnin430006
Ref: funct:unur_hitro_get_state430638
Ref: funct:unur_hitro_chg_state430709
Ref: funct:unur_hitro_reset_state431208
Node: Methods_for_CVEMP431552
Node: VEMPK435174
Ref: funct:unur_vempk_new437042
Ref: funct:unur_vempk_set_smoothing437158
Ref: funct:unur_vempk_chg_smoothing437252
Ref: funct:unur_vempk_set_varcor437962
Ref: funct:unur_vempk_chg_varcor438047
Node: Methods_for_DISCR438396
Node: DARI444434
Ref: funct:unur_dari_new446655
Ref: funct:unur_dari_set_squeeze446770
Ref: funct:unur_dari_set_tablesize447352
Ref: funct:unur_dari_set_cpfactor447791
Ref: funct:unur_dari_set_verify448218
Ref: funct:unur_dari_chg_verify448302
Node: DAU448668
Ref: funct:unur_dau_new450179
Ref: funct:unur_dau_set_urnfactor450293
Node: DEXT450665
Ref: funct:unur_dext_new458491
Ref: funct:unur_dext_set_init458610
Ref: funct:unur_dext_set_sample459211
Ref: funct:unur_dext_get_params459686
Ref: funct:unur_dext_get_distrparams460300
Ref: funct:unur_dext_get_ndistrparams460370
Node: DGT460673
Ref: funct:unur_dgt_new463717
Ref: funct:unur_dgt_set_guidefactor463831
Ref: funct:unur_dgt_set_variant464415
Node: DSROU464775
Ref: funct:unur_dsrou_new466662
Ref: funct:unur_dsrou_set_cdfatmode466778
Ref: funct:unur_dsrou_set_verify467304
Ref: funct:unur_dsrou_chg_verify467389
Ref: funct:unur_dsrou_chg_cdfatmode467802
Node: DSS468012
Ref: funct:unur_dss_new469664
Node: DSTD469778
Ref: funct:unur_dstd_new472100
Ref: funct:unur_dstd_set_variant472678
Ref: funct:unur_dstd_chg_truncated473279
Node: Methods_for_MATR474387
Node: MCORR474774
Ref: funct:unur_mcorr_new477331
Ref: funct:unur_mcorr_set_eigenvalues477447
Ref: funct:unur_mcorr_chg_eigenvalues478115
Node: Methods_for_UNID478345
Node: UNIF478615
Ref: funct:unur_unif_new479171
Node: Meta_Methods479424
Node: MIXT486262
Ref: funct:unur_mixt_new488464
Ref: funct:unur_mixt_set_useinversion488840
Node: URNG489449
Ref: funct:unur_get_default_urng496269
Ref: funct:unur_set_default_urng496479
Ref: funct:unur_set_default_urng_aux496690
Ref: funct:unur_get_default_urng_aux496763
Ref: funct:unur_set_urng496985
Ref: funct:unur_chg_urng497452
Ref: funct:unur_get_urng497781
Ref: funct:unur_set_urng_aux497975
Ref: funct:unur_use_urng_aux_default498588
Ref: funct:unur_chgto_urng_aux_default498869
Ref: funct:unur_chg_urng_aux499153
Ref: funct:unur_get_urng_aux499636
Ref: funct:unur_urng_sample500036
Ref: funct:unur_sample_urng500214
Ref: funct:unur_urng_sample_array500454
Ref: funct:unur_urng_reset501175
Ref: funct:unur_urng_sync501778
Ref: funct:unur_urng_seed502094
Ref: funct:unur_urng_anti503023
Ref: funct:unur_urng_nextsub503333
Ref: funct:unur_urng_resetsub503643
Ref: funct:unur_gen_sync503960
Ref: funct:unur_gen_seed504014
Ref: funct:unur_gen_anti504098
Ref: funct:unur_gen_reset504162
Ref: funct:unur_gen_nextsub504217
Ref: funct:unur_gen_resetsub504274
Ref: funct:unur_urng_new505323
Ref: funct:unur_urng_free506119
Ref: funct:unur_urng_set_sample_array506693
Ref: funct:unur_urng_set_sync506947
Ref: funct:unur_urng_set_seed507103
Ref: funct:unur_urng_set_anti507278
Ref: funct:unur_urng_set_reset507473
Ref: funct:unur_urng_set_nextsub507663
Ref: funct:unur_urng_set_resetsub507862
Ref: funct:unur_urng_set_delete508066
Node: URNG-FVOID508221
Ref: funct:unur_urng_fvoid_new509678
Node: URNG-GSL509961
Ref: funct:unur_urng_gsl_new514028
Ref: funct:unur_urng_gslptr_new514379
Node: URNG-GSLQRNG514957
Ref: funct:unur_urng_gslqrng_new516161
Node: URNG-PRNG516582
Ref: funct:unur_urng_prng_new518024
Ref: funct:unur_urng_prngptr_new518861
Node: URNG-RNGSTREAM519087
Ref: funct:unur_urng_rngstream_new520923
Ref: funct:unur_urng_rngstreamptr_new521149
Node: URNG-RANDOMSHIFT521368
Ref: funct:unur_urng_randomshift_new523003
Ref: funct:unur_urng_randomshift_nextshift523513
Node: Stddist523709
Node: Stddist_CONT527680
Node: F528917
Ref: funct:unur_distr_F529039
Node: beta529419
Ref: funct:unur_distr_beta529568
Node: cauchy530043
Ref: funct:unur_distr_cauchy530202
Node: chi530619
Ref: funct:unur_distr_chi530771
Node: chisquare531157
Ref: funct:unur_distr_chisquare531338
Node: exponential531691
Ref: funct:unur_distr_exponential531885
Node: extremeI532284
Ref: funct:unur_distr_extremeI532518
Node: extremeII532941
Ref: funct:unur_distr_extremeII533175
Node: gamma533659
Ref: funct:unur_distr_gamma533818
Node: gig534457
Ref: funct:unur_distr_gig534655
Node: gig2535183
Ref: funct:unur_distr_gig2535388
Node: hyperbolic535826
Ref: funct:unur_distr_hyperbolic536006
Node: ig536511
Ref: funct:unur_distr_ig536690
Node: laplace537070
Ref: funct:unur_distr_laplace537239
Node: logistic537643
Ref: funct:unur_distr_logistic537823
Node: lognormal538254
Ref: funct:unur_distr_lognormal538438
Node: lomax538885
Ref: funct:unur_distr_lomax539123
Node: normal539495
Ref: funct:unur_distr_normal539660
Node: pareto540316
Ref: funct:unur_distr_pareto540524
Node: powerexponential540897
Ref: funct:unur_distr_powerexponential541137
Node: rayleigh541516
Ref: funct:unur_distr_rayleigh541701
Node: slash541974
Ref: funct:unur_distr_slash542138
Node: student542397
Ref: funct:unur_distr_student542579
Node: triangular542894
Ref: funct:unur_distr_triangular543082
Node: uniform543446
Ref: funct:unur_distr_uniform543622
Node: weibull543981
Ref: funct:unur_distr_weibull544138
Node: Stddist_CVEC544624
Node: copula545088
Ref: funct:unur_distr_copula545292
Node: multicauchy545801
Ref: funct:unur_distr_multicauchy546000
Node: multiexponential546503
Ref: funct:unur_distr_multiexponential546727
Node: multinormal547161
Ref: funct:unur_distr_multinormal547366
Node: multistudent547826
Ref: funct:unur_distr_multistudent548010
Node: Stddist_DISCR548532
Node: binomial549163
Ref: funct:unur_distr_binomial549326
Node: geometric549730
Ref: funct:unur_distr_geometric549920
Node: hypergeometric550221
Ref: funct:unur_distr_hypergeometric550434
Node: logarithmic550931
Ref: funct:unur_distr_logarithmic551139
Node: negativebinomial551524
Ref: funct:unur_distr_negativebinomial551747
Node: poisson552072
Ref: funct:unur_distr_poisson552237
Node: Stddist_MATR552689
Node: correlation552898
Ref: funct:unur_distr_correlation553059
Node: Error_Debug553329
Node: Output_streams554224
Ref: funct:unur_set_stream555336
Ref: funct:unur_get_stream556134
Node: Debug556331
Ref: funct:unur_set_debug558781
Ref: funct:unur_chg_debug558894
Ref: funct:unur_set_default_debug559009
Node: Error_reporting559104
Ref: var:unur_errno563252
Ref: funct:unur_get_errno563346
Ref: funct:unur_reset_errno563441
Ref: funct:unur_get_strerror563573
Node: Errno563691
Node: Error_handlers566851
Ref: funct:unur_set_error_handler568838
Ref: funct:unur_set_error_handler_off569476
Node: Testing569751
Ref: funct:unur_run_tests570090
Ref: funct:unur_test_printsample570718
Ref: funct:unur_test_timing570955
Ref: funct:unur_test_timing_R572297
Ref: funct:unur_test_timing_uniform573750
Ref: funct:unur_test_timing_exponential573857
Ref: funct:unur_test_timing_total574241
Ref: funct:unur_test_count_urn575155
Ref: funct:unur_test_count_pdf575665
Ref: funct:unur_test_par_count_pdf576638
Ref: funct:unur_test_chi2577006
Ref: funct:unur_test_moments579081
Ref: funct:unur_test_correlation579876
Ref: funct:unur_test_quartiles580283
Ref: funct:unur_test_u_error580789
Node: Misc582613
Node: Math582751
Node: RVG583194
Node: Inversion584934
Node: Rejection590884
Node: Composition597829
Node: Ratio-of-Uniforms599631
Node: DiscreteInversion605438
Node: IndexedSearch608043
Node: Glossary609939
Node: Bibliography611990
Ref: bib:JKKa92612170
Ref: bib:JKBb94612319
Ref: bib:JKBc95612491
Ref: bib:JKBd97612663
Ref: bib:KBJe00612807
Ref: bib:HLD04613051
Ref: bib:AJa93613226
Ref: bib:AJa95613370
Ref: bib:CAa74613522
Ref: bib:DHLa08613662
Ref: bib:DLa86613962
Ref: bib:GWa92614067
Ref: bib:HWa95614202
Ref: bib:HDa96614358
Ref: bib:HLa00614526
Ref: bib:HLa03614774
Ref: bib:HLDa07614922
Ref: bib:KLPa05615107
Ref: bib:LJa98615443
Ref: bib:LJa00615597
Ref: bib:LJa01615734
Ref: bib:LJa02615915
Ref: bib:WGS91616059
Ref: bib:WAa77616249
Ref: bib:ADa74616465
Ref: bib:ADa82616628
Ref: bib:ADb82616777
Ref: bib:BMa58616947
Ref: bib:CHa77617089
Ref: bib:Dag89617228
Ref: bib:HDa90617372
Ref: bib:KAa81617510
Ref: bib:KRa76617653
Ref: bib:MJa87617800
Ref: bib:MGa62617930
Ref: bib:MOa84618090
Ref: bib:STa89618215
Ref: bib:ZHa94618457
Ref: bib:CPa76618668
Ref: bib:HJa61618843
Node: FIndex619017

End Tag Table
