Mantis Bug Tracker Administration Guide

   Copyright © 2013 The MantisBT Team

   Reference manual for the Mantis Bug Tracker.

   Build Date: 29 January 2013

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
   CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
   OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     __________________________________________________________

   Table of Contents
   1. About MantisBT

        1.1. What is MantisBT?
        1.2. Who should read this manual?
        1.3. License
        1.4. How to get it?
        1.5. About the Name
        1.6. History
        1.7. Support
        1.8. MantisBT News
        1.9. Versioning

   2. Installation

        2.1. Overview
        2.2. System Requirements

              2.2.1. Server Hardware Requirements
              2.2.2. Server Software Requirements
              2.2.3. Client Requirements

        2.3. Pre-installation / upgrade tasks
        2.4. New Installation
        2.5. Upgrading
        2.6. Configure your installation
        2.7. Post-installation and upgrade tasks
        2.8. Post-installation tasks
        2.9. Post-upgrade tasks
        2.10. Backups

              2.10.1. MySQL Backups

        2.11. Uninstall

   3. User Management

        3.1. Creating User Accounts
        3.2. Enabling/Disabling User Accounts
        3.3. Deleting User Accounts
        3.4. User Signup
        3.5. Forgot Password and Reset Password
        3.6. Changing Password
        3.7. Pruning User Accounts
        3.8. Authorization and Access Levels
        3.9. Auto Creation of Accounts on Login
        3.10. User Preferences
        3.11. User Profiles

   4. Issue Lifecycle and Workflow

        4.1. Issue Creation
        4.2. Issue Statuses
        4.3. Workflow

              4.3.1. Workflow Transitions
              4.3.2. Workflow Thresholds

   5. Configuration

        5.1. Database
        5.2. Path
        5.3. Webserver
        5.4. Configuration Settings
        5.5. Signup and Lost Password
        5.6. Email
        5.7. Version
        5.8. Language
        5.9. Display
        5.10. Time
        5.11. Date
        5.12. Time Zone
        5.13. News
        5.14. Default Preferences
        5.15. Summary
        5.16. Bugnote
        5.17. File Upload
        5.18. HTML
        5.19. Authentication

              5.19.1. Global authentication parameters
              5.19.2. LDAP authentication method parameters

        5.20. Status Settings
        5.21. Filters
        5.22. Misc
        5.23. Cookies
        5.24. Database Tables
        5.25. Speed Optimisation
        5.26. Reminders
        5.27. Bug History
        5.28. Sponsorship
        5.29. Source Control Integration
        5.30. Custom Fields
        5.31. My View Settings
        5.32. Relationship Graphs
        5.33. Sub-Projects
        5.34. Field Visibility
        5.35. System Logging
        5.36. Time Tracking
        5.37. SOAP API
        5.38. MantisTouch

   6. Page descriptions

        6.1. Login page
        6.2. Main page
        6.3. View Issues page
        6.4. Issue View page
        6.5. Issue Change Status page
        6.6. Issue Edit page
        6.7. My Account Page

              6.7.1. Preferences
              6.7.2. Profiles

        6.8. System Management Pages

              6.8.1. Manage Users
              6.8.2. Manage Projects Page
              6.8.3. Manage Custom Fields
              6.8.4. Manage Global Profiles
              6.8.5. Manage Configuration

        6.9. Monitor Issue
        6.10. Reopen Issue
        6.11. Delete Issue
        6.12. Close Issue
        6.13. Assign to Me
        6.14. Resolve Issue
        6.15. News Syndication

   7. Customizing MantisBT

        7.1. Custom Fields

              7.1.1. Overview
              7.1.2. Custom Field Definition
              7.1.3. Adding/Editing Custom Fields
              7.1.4. Linking/Unlinking/Ordering Existing Custom
                      Fields in Projects

              7.1.5. Localizing Custom Field Names
              7.1.6. Dynamic default values
              7.1.7. Dynamic values for Enumeration Custom Fields

        7.2. Enumerations
        7.3. Email Notifications
        7.4. Customizing Status Values
        7.5. Custom Functions

              7.5.1. Default Custom Functions
              7.5.2. Example Custom Function Override

   8. Troubleshooting

        8.1. Application Errors

              8.1.1. Error 1502 - Category not found
              8.1.2. Error 2800 - Invalid form security token

   9. Authentication

        9.1. Standard Authentication
        9.2. LDAP and Microsoft Active Directory
        9.3. Basic Authentication
        9.4. HTTP Authentication
        9.5. Deprecated authentication methods

   10. Project Management

        10.1. Change Log
        10.2. Roadmap
        10.3. Time Tracking
        10.4. Graphs
        10.5. Summary Page

   11. Contributing to MantisBT

        11.1. Talent and Time
        11.2. Recommend MantisBT to Others
        11.3. Blog about MantisBT
        11.4. Integrate with MantisBT
        11.5. Registered in MantisBT Users Directory
        11.6. Donate Money
        11.7. Sponsor MantisBT

   Colophon

   List of Tables
   6-1. Issues
     __________________________________________________________

Chapter 1. About MantisBT

1.1. What is MantisBT?

   MantisBT is a web based bug tracking system that was first made
   available to the public in November 2000. Over time it has
   matured and gained a lot of popularity, and now it has become
   one of the most popular open source bug/issue tracking systems.
   MantisBT is developed in PHP, with support to multiple database
   backends including MySQL, MS SQL, PostgreSQL and DB2.

   MantisBT, as a PHP script, can run on any operating system that
   is supported by PHP and has support for one of the DBMSes that
   are supported. MantisBT is known to run fine on Windows, Linux,
   OS/2, Mac OS X, System i and a variety of Unix operating
   systems.
     __________________________________________________________

1.2. Who should read this manual?

   This manual is targeted for the person responsible for
   evaluating, installing and maintaing MantisBT in a company.
   Typically we refer to this person as the MantisBT
   administrator.
     __________________________________________________________

1.3. License

   MantisBT is released under the terms of GNU General Public
   License (GPL). MantisBT is free to use and modify. It is free
   to redistribute as long as you abide by the distribution terms
   of the GPL.
     __________________________________________________________

1.4. How to get it?

   MantisBT is available in several Linux distributions including:
   Debian, Ubuntu, Fedora, Gentoo, Frugalware and others. Hence,
   if you are running Linux, start by checking if your
   distribution has a package for MantisBT. If not, or if the
   package is not up-to-date with the latest MantisBT version,
   then you may want to download it directly from here.

   For Windows, Mac OS X and other operating systems, use the link
   provided above to download MantisBT. The download is compressed
   in tar.gz or zip format. Both formats can be unpacked using
   tools like 7-Zip (in case of Windows).

   Note that at any point in time there are typically two "latest"
   MantisBT releases that are available for download. The latest
   production release (stable), and the latest development release
   which can be an alpha or a release candidate. It is not
   recommended to use development releases in production specially
   if it is still in the alpha stage unless the administrator is
   familiar with PHP and is able to troubleshoot and fix any
   issues that may arise.
     __________________________________________________________

1.5. About the Name

   When initially seeking to name this project Ken ran into a
   problem every programmer encounters. What is a good name? It
   has to be descriptive, unique, and not too verbose.
   Additionally having multiple meanings would be a nice touch.
   Quickly ruled out were php*Something* names which,
   incidentally, although popular, do not seem to be condoned by
   the PHP Group developers. Drawing inspiration from Open Source
   projects like Apache, Mozilla, Gnome, and so forth resulted in
   two eventual choices: Dragonfly and Mantis. Dragonfly was
   already the name of a webmail package. So the name became
   Mantis.

   Praying Mantis are insects that feed primarily on other insects
   and bugs. They are extremely desirable in agriculture as they
   devour insects that feed on crops. They are also extremely
   elegant looking creatures. So, we have a name that is fairly
   distinctive and descriptive in multiple ways. The BT suffix
   stands for "Bug Tracker" and distinguishes this project from
   general usage of the word Mantis. However, over time the
   project was typically referred to as Mantis.
     __________________________________________________________

1.6. History

   Kenzaburo Ito and a friend originally created a bug tracker as
   an internal tool for their pet project. A search for good, free
   packages came up with nothing suitable so they wrote their own.
   After a rewrite and cleanup it was made available to the public
   via the GNU General Public License (GPL). The GPL was chosen
   partly because of his belief that development tools should be
   cheap or free. In 2002, Ken was joined by Jeroen Latour, Victor
   Boctor and Julian Fitzell to be the administrators and the core
   development team of MantisBT. This marks a new era in MantisBT
   lifetime where it is now a team project.
     __________________________________________________________

1.7. Support

   There are plenty of resources to help answer support queries.
   Following are the main ones:

     * Forums - The forums are one of the most popular
       destinations for getting MantisBT support. Start off by
       searching the forums for your questions, if not found, then
       go ahead and submit a question.
     * Mailing lists - Available mailing lists are
       "mantisbt-announce" for announcements, "mantisbt-dev" for
       development issues, mantisbt-lang for localization and
       "mantisbt-help" for general help/support questions. There
       are public archives for such mailing lists. Note that only
       members of the mailing lists can post to them, hence,
       subscribe to the lists before you attempt to email them.
     * IRC - The IRC channel is mainly used by developers to
       engage in in-person discussion. The recommended tool for
       IRC is XChat (for Linux), XChat 2 (for Windows). However,
       you can also use Web Chat to connect to IRC via your web
       browser. This is also useful when your work firewall blocks
       the IRC port (although there are other workarounds
       involving tunneling to fix this issue). Many people prefer
       to use IRC to ask questions to the developers and other
       users who are in the IRC channel. The IRC channel logs are
       archived and made available on the web. (TODO: add irc logs
       link)
     * Wiki - The MantisBT Wiki has information related to "How To
       (recipes)", FAQ, feature requirements, etc.
     * Search - A good way for locating an answer for your
       question or finding more information about a topic is to
       search across all MantisBT website and the Internet via
       Google or Bing.

   It is important to note that support questions should not be
   sent directly to MantisBT developers or through the MantisBT
   contact us pages. Use of "Contact Us" page or emailing the
   developer directly is available if you are after a paid support
   or consulting service.
     __________________________________________________________

1.8. MantisBT News

   There are several ways to keep up to date with MantisBT news.
   These include:

     * mantisbt-announce mailing list is a very low traffic list
       that is used for major announcements, typically
       announcements about releases. All MantisBT users are
       encouraged to subscribe to this mailing list. The average
       traffic should be no more than one to two posts per month.
     * MantisBT Blog is used to communicate announcements about
       new releases, topics relating to MantisBT, etc. Users are
       encouraged to subscribe to the RSS feed to know when new
       posts are posted there.
     * Twitter is used to notify users about up-to-date details
       about what is happening with MantisBT development. For
       example, a Twitter update is automatically posted by the
       official bug tracker whenever an issue is resolved. Twitter
       users are encouraged to follow "mantisbt".
     __________________________________________________________

1.9. Versioning

   The release numbering convention we use is major.minor.micro
   (eg. 1.2.0rc1).

     * Major - Indicates a very large change in the core package.
       Rewrites or major milestones.
     * Minor - Significant amount of feature
       addition/modification.
     * Micro - Mostly bug fixes and maintenance releases.
     * Suffix - rc1 for first release candidate, a1 for alpha 1,
       etc.
     __________________________________________________________

Chapter 2. Installation

   This chapter explains how to install or upgrade MantisBT.
     __________________________________________________________

2.1. Overview

   The table below contains a high-level overview of the
   processes. Refer to the corresponding sections for details.

   New Installation Upgrade

    1. Check system requirements
    2. Download and deploy MantisBT
    3. Execute the Installation script
    4. Configure the system
    5. Execute post-installation common tasks
    6. Execute post-installation specific tasks

    1. Download and deploy MantisBT
    2. Backup your system
    3. Put the site down for maintenance
    4. Execute the Upgrade script
    5. Execute post-installation common tasks
    6. Execute post-upgrade specific tasks
     __________________________________________________________

2.2. System Requirements

2.2.1. Server Hardware Requirements

   MantisBT has modest hardware requirements. It requires a
   computer that is able to run the server software.

     * Server type
       The server can be a shared public web server or a dedicated
       co-located box.
     * CPU and Memory
       As for any web application, you should size your server
       based on the traffic on the site.
     * Disk
       The application code is less than 20 MB
       The amount of disk space required for the database will
       vary depending on the RDBMS and the volume of data, the
       main driving factor being the expected number and size of
       attachments.
     __________________________________________________________

2.2.2. Server Software Requirements

   All of the required software is free for commercial and
   non-commercial use (open source). Please refer to the table
   below for minimum and recommended versions.

     * Operating System
       MantisBT runs on Windows, MacOS, OS/2, Linux, Solaris, the
       BSDs, and just about anything that supports the required
       server software.
     * Web Server
       MantisBT is mainly tested with Microsoft IIS and Apache.
       However, it is expected to work with any recent web server
       software.
       File Extensions: MantisBT uses only .php files. If your
       webserver is configured for other extensions (e.g. .PHP3,
       .PHTML) then you will have to request the administrator to
       add support for .PHP files. This should be a trivial
       modification. Further details can be found in the PHP
       documentation
     * PHP
       The web server must support PHP. It can be installed as CGI
       or any other integration technology.
     * PHP extensions
       MantisBT is designed to work in as many environments as
       possible. Hence the required extensions are minimal and
       many of them are optional affecting only one feature.
          + mandatory: the extension for the RDBMS being used (
            mysqli, pgsql, oci8, mssql/sqlsrv, ibm-db2 )
          + Curl - required for the Twitter integration feature
          + GD - required for the graphs feature
          + fileinfo - Guesses the MIME type of attachments
            Without this extension, file attachment previews and
            downloads may not work correctly as MantisBT won't be
            able to send the Content-Type header to a browser
            requesting an attachment.
            This extension is included by default from PHP version
            5.3.x and above. For older versions you will need to
            install the fileinfo PECL extension (this requires
            root access to the server you're using).
     * Database
       MantisBT requires a database to store its data. The
       supported RDBMS are: MySQL (recommended), PostgreSQL, DB2,
       Microsoft SQL Server and Oracle (experimental).
       Note: There are known issues with all of the above
       platforms except MySQL, and to a lesser extend PostgreSQL;
       moreover, you should be aware that support for DB2, SQL
       server and Oracle is limited.
     __________________________________________________________

2.2.2.1. Versions compatibility table

   Category Package Minimum Version Recommended Comments
   RDBMS MySQL 4.1.x 5.0.x or above PHP extension: mysqli
   PostgreSQL 7.0 8.0 or above PHP extension: pgsql
   IBM DB2     PHP extension: ibm-db2
   MS SQL Server 2005 2005 or above PHP extension: mssql or sqlsrv
   Oracle 8i 11gR2 PHP extension: oci8
   Web Server Apache 1.3.x 2.2.x
   lighttpd 1.4.x 1.4.x
   IIS 6.0 6.0
   PHP PHP 5.1.x 5.2.x or above See above for PHP extensions
     __________________________________________________________

2.2.3. Client Requirements

   MantisBT should run on most recent browsers in the market,
   including but not limited to

     * Firefox 3 and above
     * Internet Explorer 6 and above
     * Chrome
     * Safari
     * Opera
     __________________________________________________________

2.3. Pre-installation / upgrade tasks

   These tasks cover the download and deployment of MantisBT, and
   should be performed prior to any new installation or upgrade.

    1. Download MantisBT
    2. Transfer the downloaded file to your webserver
       This can be done using whatever method you like best (ftp,
       scp, etc). You will need to telnet/ssh into the server
       machine for the next steps.
    3. Extract the release
       It is highly recommended to maintain a separate directory
       for each release. This not only avoids mismatch between
       versions, (files may have been added or removed) but also
       provides an easy path to downgrade your installation,
       should you need to.
       The usual command is (1 step):
tar -xzf filename.tar.gz
       OR (2 steps):
gunzip filename.tar.gz
tar -xf filename.tar
       Other file archiving tools such as 7-Zip should also be
       able to handle decompression of the archive.
       The extraction process should create a new directory like
       mantisbt-1.2.x
    4. Rename the directory
       For new installations, you may want to rename the directory
       just created to something simpler, e.g. mantisbt
mv mantisbt-1.2.x mantisbt
     __________________________________________________________

2.4. New Installation

   This chapter explains how to perform a new installation of
   MantisBT.

   Start by checking the system requirements and installing the
   appropriate version of required software.

   Once that is done, execute the installation script. From your
   web browser, access
http://yoursite/mantisbt/admin/install.php

   The installation procedure will go through the following steps:

    1. The script checks basic parameters for the web server
    2. Provide required information for the installation
          + database type
          + database server hostname
          + user and password
            Required privileges: SELECT, INSERT, UPDATE, and
            DELETE
          + high-privileged database account
            Additional privileges required: INDEX, CREATE, ALTER,
            and DROP
            If this account is not specified, the database user
            will be used.
    3. Click the Install/Upgrade Database button
    4. The script creates the database and tables.
       The default Administrator user account is created at this
       stage, to allow the initial login and setup of MantisBT.
    5. The script attempts to write a basic config_inc.php file to
       define the database connection parameters.
       This operation may fail if the web server's user account
       does not have write permissions to the directory (which is
       recommended for obvious security reasons). In this case,
       you will have to manually create the file and copy/paste
       the contents from the page.
    6. The script perform post installation checks on the system.
       Review and correct any errors.
     __________________________________________________________

2.5. Upgrading

   This chapter explains how to upgrade an existing MantisBT
   installation.

   Start by Performing the steps described in Pre-installation
   tasks above.

    1. Put the site down for maintenance
cp mantis_offline.php.sample mantis_offline.php
       This will prevent users from using the system while the
       upgrade is in progress.
    2. Always Backup your code, data and config files before
       upgrading !
       This includes your Mantis directory, your attachments, and
       your database. Refer to the Backups section for details.
    3. Copy the configuration files
       To preserve your system settings, you should copy the files
       listed below to the new directory, as well as any other
       custom files such as logo, favicon, css, etc.
       config_inc.php custom_strings_inc.php
       custom_constants_inc.php custom_functions_inc.php
    4. Execute the upgrade script. From your web browser, access
http://yoursite/mantisbt-NEW/admin/install.php
       where mantisbt-NEW is the name of the directory where the
       new release was extracted
    5. Provide required information for the upgrade
          + high-privileged database account
            Additional privileges required: INDEX, CREATE, ALTER,
            and DROP
            If this account is not specified, the database user
            will be used.
    6. Click the Install/Upgrade Database button
    7. At the end of the upgrade, review and correct any warnings
       or errors.

   Note Upgrading large databases


        When processing large databases from versions older than 1.2,
        the upgrade script may fail during the conversion of date
        fields, leaving the system in an inconsistent (i.e. partially
        updated) state.

        In this case, you should simply restart the upgrade process,
        which will resume where it left off. Note that you may have to
        repeat this several times, until normal completion.

        Reference: MantisBT issue 12735.
     __________________________________________________________

2.6. Configure your installation

   There are many settings that you can adjust to configure and
   customize MantisBT. Refer to the Configuration section, as well
   as the config_defaults_inc.php file for in depth explanations
   of the available options. Check out also the Customizing
   MantisBT section for further options to personalize your
   installation.

   This step is normally only required for new installations, but
   when upgrading you may want to review and possibly customize
   any new configuration options.

   Open or create the file config_inc.php in an editor and add or
   modify any values as required. These will override the default
   values.

   You may want to use the provided config_inc.php.sample file as
   a starting point.

   WARNING: you should never edit the config_defaults_inc.php file
   directly, as it could cause issues with future upgrades.
     __________________________________________________________

2.7. Post-installation and upgrade tasks

   Instructions in this section are common to both new
   installations and upgrades, and should be applied after
   completing either process.

    1. Test your configuration
       Load up admin/check.php to validate if everything is setup
       correctly.
       NOTE (for PHP 5.2 only): check.php sometimes reports the
       value of register_globals incorrectly. To confirm the
       correct value, Create a page with this line in it:
<?php phpinfo(); ?>
       save it with a .php extension and load it up in your web
       browser.
    2. Delete the admin folder
       For security reasons, the scripts within this directory
       should not be accessible on a live MantisBT site or on any
       installation that is accessible via the Internet.
       Once you have confirmed that the install/upgrade was
       successful, you should delete this directory
rm -r admin
     __________________________________________________________

2.8. Post-installation tasks

   Instructions in this section should only be applied after a new
   installation

    1. Login to your bugtracker
       Use the default Administrator account. The id and password
       are administrator / root.
    2. Create a new Administrator account
       Go to Manage > Manage Users and create a new account with
       'administrator' access level.
    3. Disable or delete the default Administrator account
    4. Create a new Project
       Go to Manage > Manage Projects and create a new project
     __________________________________________________________

2.9. Post-upgrade tasks

   Instructions in this section should only be applied after
   upgrading an existing installation.

    1. Test the new release
       Perform any additional testing as appropriate to ensure the
       new version does not introduce any regressions.
    2. Switch the site to the new version
       The commands below should be executed from the web root (or
       wherever the mantisbt scripts are installed) and assume
       that the "live" directory (old version) is named mantisbt
       and the new release directory is mantisbt-1.2.x.
mv mantisbt mantisbt-old
mv mantisbt-1.2.x mantisbt
    3. Put the site back on line
rm mantis_offline.php
       This should be the final step in the upgrade process, as it
       will let users login again.
     __________________________________________________________

2.10. Backups

   It is strongly recommended to backup your MantisBT database on
   a regular basis. The method to perform this operation depends
   on which RDBMS you use.

   Backups are a complex subject, and the specificities of
   implementing and handling them for each RDBMS are beyond the
   scope of this document. For your convenience, the section below
   provides a simple method to backup MySQL databases.

   You should also consider implementing backups of your MantisBT
   code (which includes your configs and possibly customization),
   as well as issue attachments (if stored on disk) and project
   documents.

   !!! Backups should always be performed before an upgrade !!!
     __________________________________________________________

2.10.1. MySQL Backups

   MySQL databases are easy to backup using the mysqldump command:
mysqldump -u<username> -p<password> <database name> > <output file>

   To restore a backup you will need to have a clean database.
   Then run:
mysql -u<username> -p<password> <database name> < <input file>

   You can also perform both of these tasks using phpMyAdmin

   A good idea is to make a backup script and run it regularly
   through cron or a task scheduler (for Windows see WinCron ).
   Using the current date in the filename can prevent overwriting
   and make cataloguing easier.

   References and useful links:

     * mysqlhotcopy documentation
     * automysqlbackup script
     __________________________________________________________

2.11. Uninstall

   It is recommended that you make a backup in case you wish to
   use your data in the future. See the Backups page for details.

   To uninstall MantisBT:

     * Delete the MantisBT directory and all files and
       subdirectories.
     * Drop all MantisBT tables from the database, these can be
       identified by the configured prefix for the installation.
       The default prefix is 'mantis'.
     * Remove any customizations or additions that you may have
       made.

   If you have the permissions to create/drop databases and you
   have a specific database for MantisBT that does not contain any
   other data, you can drop the whole database.
     __________________________________________________________

Chapter 3. User Management

3.1. Creating User Accounts

   In MantisBT, there is no limit on the number of user accounts
   that can be created. Typically, installations with thousands of
   users tend to have a limited number of users that have access
   level above REPORTER.

   By default users with ADMINISTRATOR access level have access to
   create new user accounts. The steps to do that are:

     * Click "Manage" on Main Menu.
     * Click "Manage Users" (if not selected by default).
     * Click "Create New Account" button just below the alphabet
       key.
     * Enter user name, email address, global access level (more
       details about access levels later). Other fields are
       optional.
     * Click "Create Users".

   Creating a user triggers the following actions:

     * Creating a user in the database.
     * If email notifications ($g_enable_email_notification) is
       set to ON, then the user will receive an email allowing
       them to activate their account and set their password.
       Otherwise, the account will be created with a blank
       password.
     * If email notifications ($g_enable_email_notification) is
       set to ON, users with access level about
       $g_notify_new_user_created_threshold_min will get a
       notification that a user account has been created.
       Information about the user like user name and email address
       are provided. The IP of the user that created the account
       is also included.

   When the 'Protected' flag is set on a user account, it
   indicates that the account is a shared account (e.g. demo
   account) and hence users logged using such account will not be
   allowed to change account preferences and profile information.

   The anonymous user account specified with the
   $g_anonymous_account option will always be treated as a
   protected user account. When you are creating the anonymous
   user account, the 'Protected' flag is essentially ignored
   because the anonymous user is always treated as a protected
   user.
     __________________________________________________________

3.2. Enabling/Disabling User Accounts

   The recommended way of retiring user accounts is to disable
   them. Scenarios where this is useful is when a person leaves
   the team and it is necessary to retire their account.

   Once an account is disabled the following will be enforced:

     * All currently active sessions for the account will be
       invalidated (i.e. automatically logged out).
     * It will no longer be possible login using this account.
     * No further email notifications will be sent to the account
       once it is disabled.
     * The user account will not show anymore in lists like
       "assign to", "send reminder to", etc.

   The disabling process is totally reversible. Hence, the account
   can be re-enabled and all the account history will remain
   intact. For example, the user will still have issues reported
   by them, assigned to them, monitored by them, etc.
     __________________________________________________________

3.3. Deleting User Accounts

   Another way to retire user accounts is by deleting them. This
   approach is only recommended for accounts that have not been
   active (i.e. haven't reported issues). Once the account is
   deleted, any issues or actions associated with such account,
   will be associated with user123 (where 123 is the code of the
   account that was deleted). Note that associated issues or
   actions are not deleted.

   As far as the underlying database, after the deletion of a
   user, records with the user id as a foreign key will have a
   value that no longer exists in the users table. Hence, any
   tools that operate directly on the database must take this into
   consideration.

   By default administrators are the only users who can delete
   user accounts. They can delete accounts by clicking Manage,
   Manage Users, locating the user to be deleted and opening it
   details page, then clicking on the "Delete User" button which
   deletes the user.

   Note that "Deleting Users" is not a reversible process. Hence,
   if it is required to re-add the user account, it is not
   possible to recreate the user account so that it gets the same
   ID and hence retains its history. However, manually creating a
   record in the users table with the same id, can possibly do
   that. However, this approach is not recommended or supported.
     __________________________________________________________

3.4. User Signup

   For open source and freeware projects, it is very common to
   setup MantisBT so that users can signup for an account and get
   a REPORTER access by default (configurable by the
   $g_default_new_account_access_level configuration option). The
   signup process can be enabled / disabled using the
   $g_allow_signup configuration option, which is enabled by
   default.

   If user signup is enabled, then it is required that
   $g_send_reset_password is ON as well, and the e-mail settings
   properly configured (see Email Configuration).

   If email notifications ($g_enable_email_notification) is set to
   ON, users with access level about
   $g_notify_new_user_created_threshold_min will get a
   notification that a user account has been created. Information
   about the user like user name, email address, IP address are
   included in the email notification.
     __________________________________________________________

3.5. Forgot Password and Reset Password

   It is pretty common for users to forget their password.
   MantisBT provides two ways to handle such scenario: "Forgot
   Password" and "Reset Password".

   "Forgot Password" is a self service scenario where users go to
   the login page, figure out they don't remember their password,
   and then click the "Lost your password?" link. Users are then
   asked for their user name and email address. If correct, then
   they are sent an email with a link which allows them to login
   to MantisBT and change their password.

   "Reset Password" scenario is where a user reports to the
   administrator that they are not able to login into MantisBT
   anymore. This can be due to forgetting their password and
   possibly user name or email address that they used when signing
   up. The administrator then goes to Manage, Manage Users,
   locates the user account and opens its details. Under the user
   account details, there is a "Reset Password" button which the
   administrator can click to reset the password and trigger an
   email to the user to allow them to get into MantisBT and set
   their password. In the case where email notifications are
   disabled, resetting password will set the password to an empty
   string.
     __________________________________________________________

3.6. Changing Password

   Users are able to change their own passwords (unless their
   account is "protected"). This can be done by clicking on "My
   Account", and then typing the new password in the "Password"
   and "Confirm Password" fields, then clicking "Update User".
   Changing the password automatically invalidates all logged in
   sessions and hence the user will be required to re-login.
   Invalidating existing sessions is very useful in the case where
   a user going onto a computer, logs into MantisBT and leaves the
   computer without logging out. By changing the password from
   another computer, the session on the original computer
   automatically becomes invalidated.
     __________________________________________________________

3.7. Pruning User Accounts

   The pruning function allows deleting of user accounts for
   accounts that have been created more than a week ago, and they
   never logged in. This is particularly useful for users who
   signed up with an invalid email or with a typo in their email
   address address.

   The account pruning can be done by administrators by going to
   "Manage", "Manage Users", and clicking the "Prune Accounts"
   button inside the "Never Logged In" box.
     __________________________________________________________

3.8. Authorization and Access Levels

   MantisBT uses access levels to define what a user can do. Each
   user account has a global or default access level that is
   associated with it. This access level is used as the access
   level for such users for all actions associated with public
   projects as well as actions that are not related to a specific
   project. Users with global access level less than
   $g_private_project_threshold will not have access to private
   projects by default.

   The default access levels shipped with MantisBT out of the box
   are VIEWER, REPORTER, UPDATER, DEVELOPER, MANAGER and
   ADMINISTRATOR. Each features has several configuration options
   associated with it and identifies the required access level to
   do certain actions. For example, viewing an issue, reporting an
   issue, updating an issue, adding a note, etc.

   For example, in the case of reporting issues, the required
   access level is configurable using the $g_report_bug_threshold
   configuration option (which is defaulted to REPORTER). So for a
   user to be able to report an issue against a public project,
   the user must have a project-specific or a global access level
   that is greater than or equal to REPORTER. However, in the case
   of reporting an issue against a private project, the user must
   have project specific access level (that is explicitly granted
   against the project) that is higher than REPORTER or have a
   global access level that is higher than both
   $g_private_project_threshold and $g_report_bug_threshold.

   Note that project specific access levels override the global
   access levels. For example, a user may have REPORTER as the
   global access level, but have a MANAGER access level to a
   specific project. Or a user may have MANAGER as the global
   access level by VIEWER access to a specific project. Access
   levels can be overridden for both public and private projects.
   However, overriding access level is not allowed for users with
   global access ADMINISTRATOR.

   Each feature typically has multiple access control
   configuration options to defines what access level can do
   certain operations. For example, adding a note may require
   REPORTER access level, updating a note my require DEVELOPER
   access level, unless the own was owned by the same user and in
   this case REPORTER access level. Such threshold configuration
   options can be set to a single access level, which means users
   with such threshold and above are authorized to do such action.
   The other option is to specify an array of access level which
   indicates that users with the explicitly specific thresholds
   are allowed to do such actions.

   It is also worth mentioning that the access levels are defined
   by the $g_access_levels_enum_string configuration option, and
   it is possible to customize such list. The default value for
   the available access levels is '10:viewer, 25:reporter,
   40:updater, 55:developer, 70:manager, 90:administrator'. The
   instructions about how to customize the list of access levels
   will be covered in the customization section.
     __________________________________________________________

3.9. Auto Creation of Accounts on Login

   In some cases MantisBT is setup in a way, where it allows users
   that already exists in a directory or another application to be
   automatically authenticated and added to MantisBT. For example,
   a company may setup their MantisBT installation in a way, where
   its staff members that are already registered in their LDAP
   directory, should be allowed to login into MantisBT with the
   same user name and password. Another example, is where MantisBT
   is integrated into some content management system, where it is
   desired to have a single registration and single sign-on
   experience. In such scenarios, once a user logs in for the
   first time, a user account is automatically created for them,
   although the password verification is still done against LDAP
   or the main users repository.
     __________________________________________________________

3.10. User Preferences

   Users can fine tune they way MantisBT interacts with them via
   modifying their user preferences. User preferences can only be
   managed by users and are not available for the administrators
   to tweak. The administrators can only tweak the default value
   for such preferences. However, once a user account is created,
   it is then the responsibility of the user to manage their own
   preferences. The user preferences include the following:

     * Default Project: A user can choose the default project that
       is selected when the user first logs in. This can be a
       specific project or "All Projects". For users that only
       work on one project, it would make sense to set such
       project as the default project (rather than "All
       Projects"). The active project is part of the filter
       applied on the issues listed in the "View Issues" page.
       Also any newly reported issues will be associated with the
       active project.
     * Refresh Delay: The refresh delay is used to specify the
       number of seconds between auto-refreshes of the View Issues
       page.
     * Redirect Delay: The redirect delay is the number of seconds
       to wait after displaying flash messages like "Issue created
       successfully", and before the user gets redirected to the
       next page.
     * Notes Sort Order: The preference relating to how notes
       should be ordered on an issue is viewed or in email
       notifications. The ascending order is where notes are
       ordered so that ordered notes appear before newer notes,
       the descending order is the reverse.
     * Email on New: If unticked, then email notifications
       relating to creation of a new issue would be disabled. Note
       that the preference is only used to disabled notifications
       that as per the administrator's configuration, this user
       would have qualified to receive them.
     * Email on Change of Handler: TODO - is this preference used?
     * Email on Feedback: TODO - is this preference used?
     * Email on Resolved: TODO
     * Email on Closed: TODO
     * Email on Reopened: TODO
     * Email on Note Added: TODO
     * Email on Status Change: TODO
     * Email on Priority Change: TODO - is this preference used?
     * Email Notes Limit: This preference can be used to limit the
       number of issue notes to view or to be included in an email
       notifications. Specifying N here means that the latest N
       notes will be included. The value 0 causes all notes to be
       included.
     * Language: The preferred language of the user. This language
       is used by the GUI and in email notifications. Note that
       MantisBT uses UTF8 for encoding the data, and hence, the
       user can be interacting with MantisBT user interface in
       Chinese while logging issue data in German.
     __________________________________________________________

3.11. User Profiles

   A user profile describes an environment that the user uses to
   run the software for which issues are being tracked. The
   profile information include "Platform", "Operating System", "OS
   Version", and "Additional Description". Each user has access to
   profiles that they create (can be multiple), in addition to
   global ones that are shared created by other users. When
   reporting issues, users can elect to enter information like
   platform, operating system, version manually, or they can
   choose from the list of profiles that are already defined.

   Global profiles are typically used by the administrator to
   define a set of standard profiles that are typically used by
   the MantisBT users. This makes it easier for the users to use
   such profiles without having to define create them. The access
   level required for users to be able to create global profiles
   is configured by the $g_manage_global_profile_threshold
   configuration option and it is defaulted to MANAGER.
     __________________________________________________________

Chapter 4. Issue Lifecycle and Workflow

4.1. Issue Creation

   The life cycle of an issue starts with its creation. An issue
   can be created via one of the following channels:

     * MantisBT Web Interface - This is where a user logs into
       MantisBT and reports a new issue.
     * SOAP API - Where an application automatically reports an
       issue into MantisBT using the SOAP API web services
       interfaces. For example, the nightly build script can
       automatically report an issue if the build fails.
     * Email - This is not supported out of the box, but there are
       existing MantisBT patches that would listen to emails on
       pre-configured email addresses and adds them to the
       MantisBT database.
     * Others - There can be several other ways to report issues.
       For example, applications / scripts that directly injects
       issues into MantisBT database (not recommended, except for
       one-off migration scripts), or PHP scripts that use the
       core MantisBT API to create new issues.
     __________________________________________________________

4.2. Issue Statuses

   An important part of issue tracking is to classify issues as
   per their status. Each team may decide to have a different set
   of categorization for the status of the issues, and hence,
   MantisBT provides the ability to customize the list of
   statuses. MantisBT assumes that an issue can be in one of three
   stages: opened, resolved and closed. Hence, the customized
   statuses list will be mapped to these three stages. For
   example, MantisBT comes out of the box with the following
   statuses: new, feedback, acknowledged, confirmed, assigned,
   resolved and closed. In this case "new" -> "assigned" map to
   opened, "resolved" means resolved and "closed" means closed.

   Following is the explanation of what the standard statuses that
   are shipped with MantisBT means.

     * New - This is the landing status for new issues. Issues
       stay in this status until they are assigned, acknowledged,
       confirmed or resolved. The next status can be
       "acknowledged", "confirmed", "assigned" or "resolved".
     * Acknowledged - This status is used by the development team
       to reflect their agreement to the suggested feature
       request. Or to agree with what the reporter is suggesting
       in an issue report, although they didn't yet attempt to
       reproduce what the reporter is referring to. The next
       status is typically "assigned" or "confirmed".
     * Confirmed - This status is typically used by the
       development team to mention that they agree with what the
       reporter is suggesting in the issue and that they have
       confirmed and reproduced the issue. The next status is
       typically "assigned".
     * Assigned - This status is used to reflect that the issue
       has been assigned to one of the team members and that such
       team member is actively working on the issue. The next
       status is typically "resolved".
     * Resolved - This status is used to reflect that the issue
       has been resolved. An issue can be resolved with one of
       many resolutions (customizable). For example, an issue can
       be resolved as "fixed", "duplicate", "won't fix", "no
       change required", etc. The next statuses are typically
       "closed" or in case of the issue being re-opened, then it
       would be "feedback".
     * Closed - This status reflects that the issue is completely
       closed and no further actions are required on it. It also
       typically hides the issue from the View Issues page. Some
       teams use "closed" to reflect sign-off by the reporter and
       others use it to reflect the fact that the fix has been
       released to customers.
     __________________________________________________________

4.3. Workflow

   Now that we have covered how an issue gets created, and what
   are the different statuses during the life cycle of such
   issues, the next step is to define the workflow. The workflow
   dictates the valid transitions between statuses and the user
   access level required of the user who triggers such
   transitions; in other words, how issues move from one status to
   another and who is authorized to trigger such transitions.

   MantisBT provides the ability for teams to define their own
   custom workflow which works on top of their custom status.
     __________________________________________________________

4.3.1. Workflow Transitions

   By default, there is no workflow defined, which means that all
   states are accessible from any other, by anyone.

   The "Manage > Manage Configuration > Workflow Transitions" page
   allows users with ADMINISTRATOR access level to do the
   following tasks:

     * Define the valid next statuses for each status.
     * Define the default next status for each status.
     * Define the minimum access level required for a user to
       transition to each status.
     * Define the default status for newly created issues.
     * Define the status at which the issue is considered
       resolved. Any issues a status code greater than or equal to
       the specified status will be considered resolved.
     * Define the status which is assigned to issues that are
       re-opened.
     * Define the required access level to change the workflow.

   Note that the scope of the applied change is dependent on the
   selected project. If "All Projects" is selected, then the
   configuration is to be used as the default for all projects,
   unless overidden by a specific project. To configure for a
   specific project, switch to it via the combobox at the top
   right corner of the screen.

   The Global ("All Projects") workflow can also be defined in the
   config_inc.php file, as per the following example.
$g_status_enum_workflow[NEW_]           ='30:acknowledged,20:feedback,40
:confirmed,50:assigned,80:resolved';
$g_status_enum_workflow[FEEDBACK]       ='30:acknowledged,40:confirmed,5
0:assigned,80:resolved';
$g_status_enum_workflow[ACKNOWLEDGED]   ='40:confirmed,20:feedback,50:as
signed,80:resolved';
$g_status_enum_workflow[CONFIRMED]      ='50:assigned,20:feedback,30:ack
nowledged,80:resolved';
$g_status_enum_workflow[ASSIGNED]       ='80:resolved,20:feedback,30:ack
nowledged,40:confirmed';
$g_status_enum_workflow[RESOLVED]       ='90:closed,20:feedback,50:assig
ned';
$g_status_enum_workflow[CLOSED]         ='20:feedback,50:assigned';

   Notes:

     * The workflow needs to have a path from the statuses greater
       than or equal to the 'resolved' state (see
       $g_bug_resolved_status_threshold) back to the 'feedback'
       state (see $g_bug_feedback_status), otherwise, the re-open
       operation won't work.
     * The first item in each list denotes the default value for
       this status, which will be pre-selected in the Change
       Status combobox in the View Issues page.
     __________________________________________________________

4.3.2. Workflow Thresholds

   This "Manage > Manage Configuration > Workflow Thresholds" page
   allows users with ADMINISTRATOR access level to define the
   thresholds required to do certain actions. Following is a list
   of such actions and what they mean:

     * Report an issue - The access levels that are allowed to
       report an issue.
     * Update an issue - The access levels that are allowed to
       update the header information of an issue.
     * Allow issue to be closed on resolved - The access levels
       that are allow to resolve and close an issue in one step.
     * Allow reporter to close issue - Indicates if reporters
       should be allowed to close issues reported by them.
     * Monitor an issue - The access levels required for a user to
       be able to monitor an issue. Once a user monitors an issue,
       the user will be included in all future email notifications
       relating to changes in the issue.
     * Handle an issue - The access levels required for a user to
       be shown in the list of users that can handle an issue.
     * Assign an issue - The access levels required for a user to
       be able to change the handler (i.e. assign / unassign) an
       issue.
     * Move an issue - The access levels required for a user to be
       able to move an issue from one project to another. (TODO:
       are these access levels evaluated against source or
       destination project?).
     * Delete an issue - The access levels required for a user to
       be able to delete an issue.
     * Reopen an issue - The access levels required for a user to
       be able to re-open a resolved or closed issue.
     * Allow Reporter to re-open Issue - Whether the reporter of
       an issue can re-open a resolved or closed issue,
       independent of their access level.
     * Status to which a reopened issue is set - This is the
       status to which an issue is set after it is re-opened.
     * Resolution to which a reopen issue is set - The resolution
       to set on issues that are reopened.
     * Status where an issue is considered resolved - The status
       at which an issue is considered resolved.
     * Status where an issue becomes readonly - Issues with such
       status and above are considered read-only. Read-only issues
       can only be modified by users with a configured access
       level. Read-only applies to the issue header information as
       well as other issue related information like relationships,
       attachments, notes, etc.
     * Update readonly issues - The access levels required for a
       user to be able to modify a readonly issue.
     * Update issue status - The access levels required for a user
       to be able to modify the status of an issue.
     * View private issues - The access levels for a user to be
       able to view a private issue.
     * Set view status (public vs. private) - The access level for
       a user to be able to set whether an issue is private or
       public, when reporting the issue. If the user reporting the
       issues doesn't have the required access, then the issue
       will be created with the default view state.
     * Update view status (public vs private) - The access level
       required for a user to be able to update the view status
       (i.e. public vs. private).
     * Show list of users monitoring issue - The access level
       required for a user to be able to view the list of users
       monitoring an issue.
     * Set status on assignment of handler - The access levels
       required for a user to be able to re-assign an issue when
       changing its status.
     * Status to set auto-assigned issues to - The status - This
       is the status that is set on issues that are auto assigned
       to users that are associated with the category that the
       issuer is reported under.
     * Limit reporter's access to their own issues - When set,
       reporters are only allow to view issues that they have
       reported.
     * Add notes - The access levels required for users to be able
       to add notes.
     * Update notes - The access levels required for users to be
       able to update issue notes.
     * Allow user to edit their own issue notes - A flag that
       indicates the ability for users to edit issue notes report
       by them.
     * Delete note - The access levels required for a user to
       delete a note that they may or may not have reported
       themselves.
     * View private notes - The access levels required for a user
       to be able to view private notes associated with an issue
       that they have access to view.
     * View Change Log - The access levels required for a user to
       be able to view the change log.
     * View Assigned To - The access levels required for a user to
       be able to know the handler of an issue that they have
       access to.
     * View Issue History - The access levels required for a user
       to be able to view the history of changes of an issue.
     * Send reminders - The access levels required for a user to
       be able to send reminders to other users relating to an
       issue that they have access to.
     __________________________________________________________

Chapter 5. Configuration

5.1. Database

   The database settings must be set in order for the package to
   work properly. These settings should be provided to you by your
   system administrator or your hosting company.

   $g_hostname
          Host name or connection string for Database server. The
          default value is localhost. For MySql, this should be
          hostname or hostname:port (e.g. localhost:3306).

   $g_db_username
          User name to use for connecting to the database. The
          user needs to have read/write access to the MantisBT
          database. The default user name is "root".

   $g_db_password
          Password for the specified user name. The default
          password is empty.

   $g_database_name
          Name of database that contains MantisBT tables. The
          default name is 'bugtracker'.

   $g_db_schema
          The database schema (used in case of DB2), otherwise
          should be left blank.

   $g_db_type
          The supported database types include: 'mysql' or
          'mysqli' for MySQL, 'pgsql' for PostgreSQL, 'mssql' for
          MS SQL Server, 'oci8' for Oracle, and 'db2' for DB2. It
          is important to make sure that the PHP extension
          corresponding to the database type is enabled.
     __________________________________________________________

5.2. Path

   These path settings are important for proper linking within
   MantisBT. In most scenarios the default values should work
   fine, and you should not need to override them.

   $g_path
          URL to your installation as seen from the web browser;
          this is what you type into the URL field. Requires
          trailing '/' character. eg.
          'http://www.example.com/mantisbt/'. In the following
          example https protocol is used: eg.
          'https://www.example.com/mantisbt/'. MantisBT will
          default this to the correct value. However, in some
          cases it might be necessary to override the default.
          This is typically needed when an installation can be
          accessed by multiple URLs (internal vs external).

   $g_icon_path
          This is the URL to the icons (images) directory as seen
          from the web browser. All MantisBT images/icons are
          loaded from this URL. The default value for this URL is
          based on $g_path (i.e. '%path%images/'). Note that a
          trailing '/' is required.

   $g_short_path
          Short web path without the domain name. This requires
          the trailing '/'.

   $g_absolute_path
          This is the absolute file system path to the MantisBT
          installation, it is defaulted to the directory where
          config_defaults_inc.php resides. Requires trailing '/'
          character (eg. '/usr/apache/htdocs/mantisbt/').

   $g_core_path
          This is the path to the core directory of your
          installation. The default value is usually OK, unless
          you move the 'core' directory out of your webroot.
          Requires trailing DIRECTORY_SEPARATOR. character.

   $g_class_path
          This is the path to the classes directory which is a
          sub-directory of core by default. The default value is
          typically OK. Requires trailing DIRECTORY_SEPARATOR.
          character.

   $g_manual_url
          This is the url to the MantisBT online manual. Requires
          trailing '/' character.
     __________________________________________________________

5.3. Webserver

   $g_use_iis
          Indicates that IIS (Microsoft Internet Information
          Server) is the web server on which MantisBT is hosted.

          Default value is normally determined automatically by
          the system.

   $g_session_handler
          Session handler. Possible values are as per the list
          below; the default is php.

          + php: PHP filesystem sessions
          + adodb: Database storage sessions
          + memcached: Memcached storage sessions

   $g_session_key
          A string to uniquely identify the MantisBT sessions.
          This should be unique between multiple installations to
          prevent conflicts. Defaults to MantisBT.

   $g_session_save_path
          Location where session files are stored. The default is
          false, meaning the session handler's default location
          will be used.

   $g_session_validation
          Use Session validation (defaults to ON)

          WARNING: Disabling this could be a potential security
          risk

   $g_form_security_validation
          Form security validation, defaults to ON. This protects
          against Cross-Site Request Forgery. Some proxy servers
          may not correctly work with this option enabled because
          they cache pages incorrectly.

          WARNING: Disabling this option is a security risk, it is
          strongly recommended to leave it ON
     __________________________________________________________

5.4. Configuration Settings

   $g_global_settings
          This option contains the list of regular expressions
          that are used to determine if it is allowed for a
          specific configuraiton option to be saved to or loaded
          from the database. Configuration options that matches
          the regular expressions are considered global only and
          hence are only configurable via the config_inc.php file
          and defaulted by config_defaults_inc.php file.
     __________________________________________________________

5.5. Signup and Lost Password

   $g_allow_signup
          Allow users to signup for their own accounts.

          If ON (default), then $g_send_reset_password must be ON
          as well, and mail settings must be correctly configured
          (see Email Configuration).

   $g_max_failed_login_count
          Maximum failing login attempts before the account is
          locked. Once locked, it's required to reset the password
          (lost password). Value resets to zero at each
          successfully login. Default is OFF.

   $g_notify_new_user_created_threshold_min
          The minimum global access level required to be notified
          when a new user registers via the "signup form". To pick
          specific access levels that are not necessarily at the
          higher end of access levels, use an array of access
          levels. Default is ADMINISTRATOR.

   $g_send_reset_password
          If ON (default), users will be sent their password when
          their account is created or password reset (this
          requires mail settings to be correctly configured).

          If OFF, then the Administrator will have to provide a
          password when creating new accounts, and the password
          will be set to blank when reset.

   $g_password_confirm_hash_magic_string
          TODO

   $g_signup_use_captcha
          TODO

   $g_system_font_folder
          TODO

   $g_font_per_captcha
          TODO

   $g_lost_password_feature
          TODO

   $g_max_lost_password_in_progress_count
          TODO
     __________________________________________________________

5.6. Email

   $g_administrator_email
          The administrator's e-mail address. This is mainly
          prompted to the user in case of errors that might
          require the intervention of the system administrator.
          For example, SQL errors. sysadmin@example.com

   $g_webmaster_email
          The webmaster's e-mail address. This address is
          displayed in the bottom of all MantisBT pages.
          webmaster@example.com

   $g_from_email
          The email address to be used as the source of all emails
          sent by MantisBT. noreply@example.com

   $g_return_path_email
          Email address to receive bounced emails.

   $g_enable_email_notification
          Set to ON to enable email notifications, OFF to disable
          them. Default is ON. Note that disabling email
          notifications has no effect on emails generated as part
          of the user signup process. When set to OFF, the
          password reset feature is disabled. Additionally,
          notifications of administrators updating accounts are
          not sent to users.

   $g_default_notify_flags
          Associated with each action a list of flags to control
          who should be notified.The default will be used if the
          action is not included in $g_notify_flags or if the flag
          is not included in the specific action definition. The
          list of actions include: new, assigned, resolved,
          bugnote, reopened, closed, deleted, feedback.The default
          is: $g_default_notify_flags = array('reporter' => ON,
          'handler' => ON, 'monitor' => ON, 'bugnotes' => ON,
          'explicit' => ON, 'threshold_min' => NOBODY,
          'threshold_max' => NOBODY); threshold_min and
          threshold_max are used to send messages to all members
          of the project whose status is greater than or equal to
          "threshold_min" and less than or equal to
          "threshold_max". Sending messages to everyone would set
          "threshold_min" to ANYBODY and "threshold_max to
          "NOBODY". To send to all DEVELOPERS and above (as
          0.17.5), use DEVELOPER and NOBODY respectively.

   $g_notify_flags
          Defines the notification flags that are different from
          the defaults that are defined in
          $g_default_notify_flags. The following code overrides
          the default by disabling notifications to bugnote
          authors and users monitoring the bug on submitting a new
          bug: $g_notify_flags['new'] = array('bugnotes' => OFF,
          'monitor' => OFF); Available actions include:

          + 'new': a new bug has been added
          + 'reopened': the bug has been reopened
          + 'deleted': a bug has been deleted
          + 'owner': the bug has been assigned a new owner
          + 'bugnote': a bugnote has been added to a bug
          + 'sponsor': the sponsorship for the bug has changed
            (added, deleted or updated)
          + 'relation': a relationship for the bug has changed
            (added, deleted or updated)
          + 'monitor': a user is added to the monitor list.

          In addition, an action can match the bug status in
          $g_status_enum_string. Note that spaces in the string
          are replaced with underscores ('_') in creating the
          action. Thus, using the defaults, 'feedback' would be a
          valid action.

   $g_email_receive_own
          This defines whether users should receive emails for
          their own actions. This option is defaulted to OFF,
          hence, users do not receive email notification for their
          own actions. This can be a source for confusions for
          users upgrading from MantisBT 0.17.x versions, since in
          these versions users used to get notified of their own
          actions.

   $g_validate_email
          Set to OFF to disable email checking. Default is ON.

   $g_check_mx_record
          Set to OFF to disable email checking. Default is OFF.

   $g_allow_blank_email
          If ON, allows the user to omit an email address field.
          If you allow users to create their own accounts, they
          must specify an email at that point, no matter what the
          value of this option is. Otherwise they wouldn't get
          their passwords.

   $g_limit_email_domain
          Only allow and send email to addresses in the given
          domain. This is useful as a security feature and it is
          also useful in cases like Sourceforge where its servers
          are only limited to send emails to SourceForge email
          addresses in order to avoid spam. $g_limit_email_domain
          = 'users.sourceforge.net';

   $g_show_user_email_threshold
          This specifies the access level that is needed to have
          user names hyperlinked with mailto: links. The default
          value is NOBODY, hence, even administrators won't have
          this feature enabled.

   $g_mail_priority
          If use_x_priority is set to ON, what should the value
          be? Urgent = 1, Not Urgent = 5, Disable = 0 . Default is
          3 Some MTAs interpret X-Priority = 0 to mean 'Very
          Urgent'

   $g_phpMailer_method
          Select the method to mail by: PHPMAILER_METHOD_MAIL for
          use of mail() function, PHPMAILER_METHOD_SENDMAIL for
          sendmail (or postfix), PHPMAILER_METHOD_SMTP for SMTP.
          Default is PHPMAILER_METHOD_MAIL.

   $g_smtp_host
          This option specifies the SMTP server to submit messages
          to. The SMTP server (MTA) then takes on the
          responsibility of delivering such messages to their
          final destinations. To use the local SMTP (if available)
          set this to 'localhost', otherwise use the fully
          qualified domain name of the remote SMTP server. Default
          value is 'localhost'.

   $g_smtp_port
          The smtp port to use. The typical SMTP ports are 25 and
          587. The port to use will depend on the SMTP server
          configuration and hence others may be used. The default
          is 25.

   $g_smtp_connection_mode
          This option allows you to specify the connection mode to
          the SMTP server. Possible values are '', 'ssl', 'tls'.
          The default value is ''.

   $g_smtp_username
          This option allows the use of SMTP Authentication when
          using a remote SMTP host with PHPMailer. If
          smtp_username is not '' then the username and password
          will be used when logging in to the SMTP server. Default
          is ''.

   $g_smtp_password
          This is the password that is used in SMTP Authentication
          . Default is ''.

   $g_email_send_using_cronjob
          Disables sending of emails as soon as an action is
          performed. Emails are instead queued and must be sent by
          running scripts/send_emails.php periodically. This
          script can only be executed from the CLI, not from the
          web interface, for security reasons.

          Enabling this option can help with performance problems
          if large numbers of emails are generated or mail
          delivery is slow by not delaying page execution when
          sending emails.

   $g_email_set_category
          Specify whether e-mails should be sent with the category
          set or not. This is tested with Microsoft Outlook. More
          testing for this feature + other formats will be added
          in the future. OFF, EMAIL_CATEGORY_PROJECT_CATEGORY
          (format: [Project] Category). Default is OFF.

   $g_email_separator1
          Default is str_pad('', 70, '='); This means 70 equal
          signs.

   $g_email_separator2
          Default is str_pad('', 70, '-'); This means 70 minus
          signs.

   $g_email_padding_length
          Default is 28.

   MantisBT uses flags and a threshold system to generate emails
   on events. For each new event, email is sent to:

     * the reporter, qualified by the notify flag 'reporter' below
     * the handler (or Assigned to), qualified by the notify flag
       'handler' below
     * anyone monitoring the bug, qualified by the notify flag
       'monitor' below
     * anyone who has ever added a bugnote the bug, qualified by
       the notify flag 'bugnotes' below
     * anyone assigned to the project whose access level is
       greater than or equal to the notify flag 'threshold_min'
       and less than or equal to the notify flag 'threshold_max'
       below

   From this list, those recipients who meet the following
   criteria are eliminated:

     * the originator of the change, if $g_email_receive_own is
       OFF
     * the recipient either no longer exists, or is disabled
     * the recipient has turned their email_on_<new status>
       preference OFF
     * the recipient has no email address entered
     __________________________________________________________

5.7. Version

   $g_show_version
          Whether to show the MantisBT version at the bottom of
          each page or not. Default is ON.
     __________________________________________________________

5.8. Language

   $g_default_language
          This is the language used by default in MantisBT. This
          may be set to 'auto' where MantisBT will try to
          determine the language from the browser.

   $g_language_choices_arr
          This is to be set to an array of languages that are
          available for users to choose from. The default value
          includes all languages supported by MantisBT. The
          administrator can limit the languages available for
          users to choose from by overriding this value. For
          example, to support English, French and German include
          the following code: array( 'english', 'french', 'german'
          ); Of course, administrators can also add their own
          languages by translating the strings and creating their
          own language files. You are encouraged to share any
          translation work that you do with the MantisBT team.
          This will ensure that the newly created language file is
          maintained with future MantisBT releases.All language
          files reside in the lang/ folder. They are all named
          according to the following pattern:
          strings_<language>.txt.

   $g_fallback_language
          This is the language used if MantisBT cannot determine
          the language from the browser. It defaults to
          'english'.As of 0.19.0, this may be set to 'auto' where
          MantisBT will try to determine the language from the
          browser.

   Note

        If a string does not exist in the active language, the English
        string is used instead.
     __________________________________________________________

5.9. Display

   $g_window_title
          This is the browser window title (<TITLE> tag).

   $g_page_title
          This is a heading that is displayed in the viewing area
          of the page.

   $g_favicon_image
          Path to the favorites icon relative to MantisBT root
          folder (default 'images/favicon.ico').

   $g_logo_image
          Path to the logo image relative to MantisBT root folder
          (default 'images/mantis_logo.gif').

   $g_logo_url
          The default URL to be associated with the logo. By
          default this is set to $g_default_home_page (which
          defaults to My View page). Clicking on the logo from any
          page in the bug tracker will navigate to the URL
          specified in this configuration option.

   $g_show_footer_menu
          Show the menu at the bottom of the page as well as at
          the top. Default value is OFF.

   $g_show_project_menu_bar
          This option specifies whether to add menu at the top of
          the page which includes links to all the projects. The
          default value is OFF.

   $g_show_assigned_names
          When a bug is assigned then replace the word "assigned"
          with the name of the developer in parenthesis. Default
          is ON.

   $g_show_priority_text
          Specifies whether to show priority as text (ON) or icon
          (OFF) in the view all bugs page. Default is OFF (icon).

   $g_priority_significant_threshold
          Define the priority level at which a bug becomes
          significant. Significant bugs are displayed with
          emphasis. Set this value to -1 to disable the feature.
          The default value is HIGH.

   $g_severity_significant_threshold
          Define the severity level at which a bug becomes
          significant. Significant bugs are displayed with
          emphasis. Set this value to -1 to disable the feature.
          The default value is MAJOR.

   $g_view_issues_page_columns
          This configuration option is used to select the columns
          to be included in the View Issues page and in which
          order. If one of the column is not accessible to the
          logged in user, or corresponds to a disabled feature,
          then it will be automatically removed from the list at
          runtime. Hence, the same column list may show a
          different set of columns based on the logged in user,
          the currently selected project and enabled features
          (e.g. sponsorship_total is only shown if the sponsorship
          feature is enabled).

          The supported columns are: selection, edit, id,
          project_id, reporter_id, handler_id, priority,
          reproducibility, projection, eta, resolution,
          fixed_in_version, view_state, os, os_build, build (for
          product build), platform, version, date_submitted,
          attachment_count, category, sponsorship_total, severity,
          status, last_updated, summary, bugnotes_count,
          description, steps_to_reproduce, additional_info. As for
          custom fields they can be referenced by adding a
          'custom_' to their name (e.g. xyz would be custom_xyz).

          By default the following columns are selected:
          selection, edit, priority, id, sponsorship_total,
          bugnotes_count, attachment_count, category_id, severity,
          status, last_updated, summary.

   $g_print_issues_page_columns
          This configuration option is used to select the columns
          to be included in the Print Issues page and in which
          order. See $g_view_issues_page_columns for more details
          about the supported fields.

          By default the following columns are selected:
          selection, priority, id, sponsorship_total,
          bugnotes_count, attachment_count, category_id, severity,
          status, last_updated, summary

   $g_csv_columns
          This configuration option is used to select the columns
          to be included in the CSV export and in which order. See
          $g_view_issues_page_columns for more details about the
          supported fields.

          By default the following columns are selected: id,
          project_id, reporter_id, handler_id, priority, severity,
          reproducibility, version, build, projection,
          category_id, date_submitted, eta, os, os_build,
          platform, view_state, last_updated, summary, status,
          resolution, fixed_in_version, duplicate_id.

   $g_excel_columns
          This configuration option is used to select the columns
          to be included in the CSV export and in which order. See
          $g_view_issues_page_columns for more details about the
          supported fields.

          By default the following columns are selected: id,
          project_id, reporter_id, handler_id, priority, severity,
          reproducibility, version, build, projection,
          category_id, date_submitted, eta, os, os_build,
          platform, view_state, last_updated, summary, status,
          resolution, fixed_in_version, duplicate_id.

   $g_show_bug_project_links
          Show project links when in All Projects mode. Default is
          ON.

   $g_status_legend_position
          Specifies the position of the status colour legend, can
          be: STATUS_LEGEND_POSITION_TOP or
          STATUS_LEGEND_POSITION_BOTTOM. Default is
          STATUS_LEGEND_POSITION_BOTTOM.

   $g_show_product_version
          This controls display of the product version in the
          report, view, update and print issue pages. This flag
          also applies to other product version related fields
          like product build, fixed in version, and target
          version. Valid values are ON, OFF, and AUTO. ON for
          always displayed, AUTO for displayed when project has
          versions defined, and OFF for always OFF. The default
          value is AUTO.

   $g_show_version_dates_threshold
          The access level threshold at which users will see the
          date of release for product versions. Dates will be
          shown next to the product version, target version and
          fixed in version fields. Set this threshold to NOBODY to
          disable the feature. Default value is NOBODY.

   $g_show_realname
          This control will replace the user's userid with their
          realname. If it is set to ON, and the real name field
          has been populated, the replacement will occur. It
          defaults to OFF.

   $g_show_avatar
          Show the user's avatar

          The current implementation is based on Gravatar; Users
          will need to register there the same email address used
          in this MantisBT installation to have their avatar
          shown. Please note: upon registration or avatar change,
          it may take some time for the updated gravatar images to
          show on sites

          The config can be either set to OFF (avatars disabled),
          or to a string defining the default avatar to be used
          when none is associated with the user's email. Valid
          values are:

          + OFF (default)
          + ON (equivalent to 'identicon')
          + One of Gravatar's defaults (mm, identicon, monsterid,
            wavatar, retro); refer to Image Requests documentation
            for further details.
          + An URL to the default image to be used (for example,
            "http:/path/to/unknown.jpg" or
            "%path%images/no_avatar.png").

   $g_show_avatar_threshold
          The threshold of users for which MantisBT should attempt
          to show the avatar (default DEVELOPER). Note that the
          threshold is related to the user for whom the avatar is
          being shown, rather than the user who is currently
          logged in.
     __________________________________________________________

5.10. Time

   $g_cookie_time_length
          Time for 'permanent' cookie to live in seconds. This is
          what is used when a user selects "save login". Default
          is the equivalent of 1 year (30000000).

   $g_allow_permanent_cookie
          Allow users to opt for a 'permanent' cookie when logging
          in. Controls the display of the 'Remember my login in
          this browser' checkbox on the login page. See
          $g_cookie_time_length.

   $g_wait_time
          Time to delay between page redirects (in seconds). Users
          can override this setting in their user preferences.
          Default is 2 seconds.

   $g_content_expire
          Time to wait before document is stale (in minutes). This
          is used in meta_inc.php. Default is 0 (expires right
          away).

   $g_long_process_timeout
          This timeout is used by pages which does time consuming
          operations like upgrading the database. The default
          value of 0 disables timeout. Note that this timeout is
          specified in seconds.
     __________________________________________________________

5.11. Date

   These variables control how the date is displayed (default is
   'US' formatting). Go to the date() function in PHP online
   manual for detailed instructions on date formatting.

   $g_short_date_format
          This format is used in the bug listing pages (eg: View
          Bugs). Default is 'm-d-y'.

   $g_normal_date_format
          This format is used in the view/update bug pages, bug
          notes, manage section, and news section. Default is
          'm-d-y H:i'.

   $g_complete_date_format
          This format is used on the top of each page (current
          time) and the emails that are sent out. Default is
          'm-d-y H:i T'.
     __________________________________________________________

5.12. Time Zone

   $g_default_timezone
          Default timezone to use in MantisBT. This must be set to
          one of the values specified in the List of Supported
          Timezones.

          If this config is left blank (default), it will be
          initialized by calling function
          date_default_timezone_get() to determine the default
          timezone. With PHP >= 5.3, this will result in a system
          warning if the timezone has not been defined in php.ini.
          Note that this function's behavior was modified in PHP
          5.4.0.
     __________________________________________________________

5.13. News

   These options are used to control the query that selects the
   news entries to be displayed.

   $g_news_enabled
          Indicates whether the news feature should be enabled or
          disabled. The default is OFF. The news feature is
          deprecated in favor of being moved to a plugin.

   $g_news_limit_method
          Limit the news entry that are displayed by number of
          entries (BY_LIMIT) or by date (BY_DATE). The default is
          BY_LIMIT.

   $g_news_view_limit
          The limit for the number of news entries to be
          displayed. This option is only used if
          $g_news_limit_method is set to BY_LIMIT.

   $g_news_view_limit_days
          Specifies the number of dates after which the news are
          not displayed. This option is only used if
          $g_news_limit_method is set to BY_DATE.

   $g_private_news_threshold
          Specifies the access level required to view private
          news. The default is DEVELOPER.
     __________________________________________________________

5.14. Default Preferences

   $g_default_new_account_access_level
          This is the default access level users are given when
          their account is created by email. The default access
          level is REPORTER. Look in constant_inc.php for other
          values.

   $g_default_bug_view_status
          The default viewing status for the new bug (VS_PUBLIC or
          VS_PRIVATE). The default is VS_PUBLIC.

   $g_default_bugnote_view_status
          The default viewing status for the new bugnote
          (VS_PUBLIC or VS_PRIVATE). The default is VS_PUBLIC.

   $g_default_reminder_view_status
          The default viewing status for the new reminders
          (VS_PUBLIC or VS_PRIVATE). The default is VS_PUBLIC.

   $g_reminder_receive_threshold
          The minimum access level for a user to show up in the
          reminder user picker. Note that this is the access level
          for the project for which the issue belongs. The default
          is DEVELOPER.

   $g_default_bug_resolution
          The resolution for a newly created issue. The default is
          OPEN. Look in constant_inc.php for other values.

   $g_default_bug_severity
          The severity for a newly created issue. The default is
          MINOR. Look in constant_inc.php for other values.

   $g_default_bug_priority
          The priority for a newly created issue. The default is
          NORMAL. Look in constant_inc.php for other values.

   $g_default_bug_reproducibility
          The reproducibility for a newly created issue. The
          default is REPRODUCIBILITY_HAVENOTTRIED. Look in
          constant_inc.php for other values.

   $g_default_bug_projection
          The projection for a newly created issue. The default is
          PROJECTION_NONE. Look in constant_inc.php for other
          values.

   $g_default_bug_eta
          The ETA for a newly created issue. The default is
          ETA_NONE. Look in constant_inc.php for other values.

   $g_default_category_for_moves
          Default global category to be used when an issue is
          moved from a project to another that doesn't have a
          category with a matching name. The default is 1 which is
          the "General" category that is created in the default
          database.

   $g_default_limit_view
          Number of bugs to show in the View Bugs page. The
          default value is 50.

   $g_default_show_changed
          Highlight bugs that have changed during the last N
          hours. The default value is 6.

   $g_hide_status_default
          Controls which issues will be displayed in the View
          Issues page. Default value is CLOSED, implying that all
          issues at "closed" or higher state will not be shown.

   $g_min_refresh_delay
          This is the delay between automatic refreshes of the
          View Issues page in minutes. Make sure refresh delay in
          user preferences isn't too short. If a users set their
          preferences to be lower then it is bumped back up to
          this minimum value. The default value is 10 minutes.

   These settings are used as the default values for preferences
   for new users. Each user can override these settings through
   the user preferences form. Default language is set to default
   site language ($g_default_language).

   $g_default_refresh_delay
          Default page refresh delay (in minutes). This is for the
          bug listing pages. Default value is 30 minutes.

   $g_default_redirect_delay
          Default delay before a user is redirected to a page
          after being prompted by a message (eg: operational
          successful). Default value is 2 seconds.

   $g_default_bugnote_order
          This controls the time order in which bug notes are
          displayed. It can be either ASC (oldest first, the
          default) or DESC (newest first).

   $g_default_email_on_new$g_default_email_on_assigned$g_default_e
          mail_on_feedback$g_default_email_on_resolved$g_default_e
          mail_on_closed
          Default user preferences to enable receiving emails when
          a bug is set to the corresponding status. This option
          only has an effect if users have the required access
          level to receive such emails. Default value is ON.

   $g_default_email_on_reopened
          Default user preferences to enable receiving emails when
          bugs are re-opened. Default value is ON.

   $g_default_email_on_bugnote
          Default user preferences to enable receiving emails when
          bugnotes are added to bugs. Default value is ON.

   $g_default_email_on_status$g_default_email_on_priority
          Default user preferences to enable receiving emails when
          status or priority is changed. Default is ON. Note that
          this option is not implemented.

   $g_default_email_on_new_minimum_severity$g_default_email_on_ass
          igned_minimum_severity$g_default_email_on_feedback_minim
          um_severity$g_default_email_on_resolved_minimum_severity
          $g_default_email_on_closed_minimum_severity$g_default_em
          ail_on_reopened_minimum_severity$g_default_email_on_bugn
          ote_minimum_severity
          Default user preferences to enable filtering based on
          issue severity. These correspond to the
          email_on_<status> settings. Default is 'any'.

   $g_default_email_on_bugnote_minimum_severity
          Default user preference to enable filtering based on
          issue severity. These corresponds to the
          email_on_bugnote setting. Default is 'any'.

   $g_default_email_on_status_minimum_severity$g_default_email_on_
          priority_minimum_severity
          Default user preferences to enable filtering based on
          issue severity. These correspond to the email_on_status
          and email_on_priority settings. Default is 'any'. Note
          that this option is not yet implemented.

   See also: Email Notifications
     __________________________________________________________

5.15. Summary

   These are the settings that are used to configuration options
   related to the Summary page. This page contains statistics
   about the bugs in MantisBT.

   $g_reporter_summary_limit
          Limit how many reporters to show in the summary page.
          This is useful when there are dozens or hundreds of
          reporters. The default value is 10.

   $g_date_partitions
          An array of date lengths to count bugs by (in days) for
          the summary by date. The default is to count for 1, 2,
          3, 7, 30, 60, 90, 180, and 365.

   $g_summary_category_include_project
          Specifies whether category names should be preceded by
          project names (eg: [Project] Category) when the summary
          page is viewed for all projects. This is useful in the
          case where category names are common across projects.
          The default is OFF.

   $g_view_summary_threshold
          Specifies the access level required to view the summary
          page. Default is VIEWER.

   $g_severity_multipliers
          An array of multipliers which are used to determine the
          effectiveness of reporters based on the severity of
          bugs. Higher multipliers will result in an increase in
          reporter effectiveness. The default multipliers are:

$g_severity_multipliers = array ( FEATURE => 1,

  TRIVIAL => 2,

  TEXT => 3,

  TWEAK => 2,

  MINOR => 5,

  MAJOR => 8,

  CRASH => 8,

  BLOCK => 10 );

          The keys of the array are severity constants from
          constant_inc.php or from custom_constants_inc.php if you
          have custom severities defined. The values are integers,
          typically in the range of 0 to 10. If you would like for
          a severity to not count towards effectiveness, set the
          value to 0 for that severity.

   $g_resolution_multipliers
          An array of multipliers which are used to determine the
          effectiveness of reporters based on the resolution of
          bugs. Higher multipliers will result in a decrease in
          reporter effectiveness. The only resolutions that need
          to be defined here are those which match or exceed
          $g_bug_resolution_not_fixed_threshold. The default
          multipliers are:

$g_resolution_multipliers = array( UNABLE_TO_DUPLICATE => 2,

   NOT_FIXABLE => 1,

   DUPLICATE => 3,

   NOT_A_BUG => 5,

   SUSPENDED => 1,

   WONT_FIX => 1 );

          The keys of the array are resolution constants from
          constant_inc.php or from custom_constants_inc.php if you
          have custom resolutions defined. Resolutions not
          included here will be assumed to have a multiplier value
          of 0. The values are integers, typically in the range of
          0 to 10. If you would like for a resolution to not count
          towards effectiveness, set the value to 0 for that
          resolution or remove it from the array completely. Note
          that these resolution multipliers are stacked on top of
          the severity multipliers. Therefore by default, a user
          reporting many duplicate bugs at severity level BLOCK
          will be far worse off than a user reporting many
          duplicate bugs at severity level FEATURE.
     __________________________________________________________

5.16. Bugnote

   $g_bugnote_order
          Order to use for sorting bugnotes by submit date.
          Possible values include ASC for ascending and DESC for
          descending order. The default value is ASC.
     __________________________________________________________

5.17. File Upload

   MantisBT allows users to upload file attachments and associate
   them with bugs as well as projects. Bug attachments / project
   documents can be uploaded to the webserver, database or an FTP
   server. When bugs are uploaded to the webserver they are
   uploaded to the path that is configured in the project
   properties. In case of problems getting the file upload feature
   to work, check the following resources: PHP Manual .

   $g_allow_file_upload
          Whether to allow/disallow uploading of attachments.
          Default value is ON.

   $g_file_upload_method
          Specify the location for uploading attachments. This can
          be DISK, DATABASE, or FTP. In case of FTP, the files are
          saved on the webserver (same as disk) as well as on the
          specified FTP server. Default value is DATABASE. In case
          of DISK / FTP upload methods you need to provide the
          webserver with write access rights to the configured
          upload path (configured in the project) and temporary
          upload path (used by PHP).

   $g_file_upload_max_num
          Maximum number of files that can be uploaded
          simultaneously.

   $g_max_file_size
          The maximum file size to allow as an attachment. You may
          also have to configure your php.ini file to increase the
          execution time, memory limit, max post size, and max
          upload size.

   $g_file_upload_ftp_server
          Address of the FTP server to write to (eg:
          ftp.example.com). This option is only effective if
          upload method is FTP.

   $g_file_upload_ftp_user
          FTP user name for account to be used in uploading files
          to the FTP server. This account must have read/write
          access to the FTP server. The default path for the
          account is used for uploading the files.

   $g_file_upload_ftp_pass
          Password to use when logging in to the FTP server.

   $g_max_file_size
          Maximum file size that can be uploaded. Default value is
          about 5MB. The max file upload size is also affected by
          the value specified in php.ini. The PHP value is usually
          defaulted to 2MB.

   $g_allowed_files
          Files that are allowed. Separate items by commas. eg.
          "zip,bmp,gif,jpg,txt" If $g_allowed_files is filled in
          NO other file types will be allowed. If empty it will
          assume any files are accepted that pass the
          $g_disallowed_files list.

   $g_disallowed_files
          Files that are not allowed. Separate items by commas.
          eg. "php,php3,phtml,html,class,java,exe,pl"
          $g_disallowed_files takes precedence over
          $g_allowed_files. It is recommended to disable all
          extensions that can be executed by your server.

   $g_document_files_prefix
          Prefix to give to uploaded files when saved to the
          upload directory. This is used for documents that are
          attached to projects in order to be able to
          differentiate them from files that are attached to bugs.
          The name of the file has the following format
          prefix-projectcode-filename. The default value is 'doc'.

   $g_preview_attachments_inline_max_size
          This limit applies to previewing of image / text
          attachments. If the attachment size is smaller than the
          specified value, the attachment is previewed with the
          issue details. The previewing can be disabled by setting
          this configuration to 0. The default value is 256 * 1024
          (256KB).

   $g_fileinfo_magic_db_file
          Specify the filename of the magic database file. This is
          used by PHP 5.3.0 (or earlier versions with the fileinfo
          PECL extension) to guess what the MIME type of a file
          is. Usually it is safe to leave this setting as the
          default (blank) as PHP is usually able to find this file
          by itself.
     __________________________________________________________

5.18. HTML

   $g_html_tags
          This is the list of HTML tags that are allowed.Do NOT
          include href or img tags here.Do NOT include tags that
          have parameters (eg. )The HTML code is allowed to enter
          the database as is. The $g_allow_href_tags does not have
          to be enabled to make URL links. The package will
          automatically hyperlink properly formatted URLs eg.
          http://blah.blah/ or mailto://me@more.com/

   $g_hr_size
          hr size.

   $g_hr_width
          hr width. Leave off the percentage (%) symbol.

   $g_bottom_include_page
          If this page exists it will be displayed at the bottom
          of every page. It makes a good company branding include
          page.

   $g_top_include_page
          If this page exists it will be displayed at the top of
          every page. It makes a good company branding include
          page.

   $g_css_include_file
          Set this to point to the CSS file of your choice.

   $g_css_rtl_include_file
          Set this to point to the RTL CSS file of your choice.

   $g_meta_include_file
          Set this to point to the META tag file of your choice.

   $g_main_menu_custom_options
          This option will add custom options to the main menu. It
          is an array of arrays listing the caption, access level
          required, and the link to be executed. For example:
          $g_main_menu_custom_options = array( array( "My Link",
          MANAGER, 'my_link.php' ), array( "My Link2",
          ADMINISTRATOR, 'my_link2.php' ) ); Note that if the
          caption is found in custom_strings_inc.php, then it will
          be replaced by the translated string. Options will only
          be added to the menu if the current logged in user has
          the appropriate access level.
     __________________________________________________________

5.19. Authentication

5.19.1. Global authentication parameters

   $g_login_method
          Specifies which method will be used to authenticate. It
          should be one of the following values (defaults to MD5):

          + MD5 - user's password is stored as a hash in the
            database
          + LDAP - authenticates against an LDAP (or Active
            Directory) server
          + BASIC_AUTH
          + HTTP_AUTH

          In addition, the following deprecated values are
          supported for backwards-compatibility, and should no
          longer be used:

          + PLAIN - password is stored in plain, unencrypted text
            in the database
          + CRYPT
          + CRYPT_FULL_SALT

          Note: you may not be able to easily switch encryption
          methods, so this should be carefully chosen at install
          time. However, MantisBT will attempt to "fall back" to
          older methods if possible.

   $g_reauthentication
          Determines whether MantisBT will require the user to
          re-authenticate before granting access to the Admin
          areas after timeout expiration. Defaults to ON

   $g_reauthentication_expiry
          Duration of the reauthentication timeout, in seconds.
          Defaults to 5 minutes.
     __________________________________________________________

5.19.2. LDAP authentication method parameters

   The parameters below are only used if $g_login_method (see
   above) is set to LDAP.

   $g_ldap_server
          Specifies the LDAP or Active Directory server to connect
          to, and must be provided as an URI

          The protocol is optional, can be one of ldap or ldaps,
          and defaults to ldap.

          The port number is optional, and defaults to 389. If
          this doesn't work, try using one of the following
          standard port numbers: 636 (ldaps); for Active Directory
          Global Catalog forest-wide search, use 3268 (ldap) or
          3269 (ldaps)

          Examples of valid URI:

              ldap.example.com
              ldap.example.com:3268
              ldap://ldap.example.com/
              ldaps://ldap.example.com:3269/

   $g_ldap_root_dn
          The root distinguished name for LDAP searches. For
          example, "dc=example, dc=com".

   $g_ldap_organization
          LDAP search filter for the organization, for example,
          "(organizationname=*Traffic)". Defaults to ''.

   $g_ldap_protocol_version
          The LDAP Protocol Version. If 0, then the protocol
          version is not set. Defaults to 0.

          For Active Directory use protocol version 3.

   $g_ldap_follow_referrals
          Determines whether the LDAP library automatically
          follows referrals returned by LDAP servers or not. This
          maps to LDAP_OPT_REFERRALS ldap library option. Defaults
          to ON.

          For Active Directory, this should be set to OFF.

   $g_ldap_bind_dn
          The distinguished name of the service account to use for
          binding to the LDAP server. For example,
          'CN=ldap,OU=Administrators,DC=example,DC=com'.

   $g_ldap_bind_passwd
          The password for the service account used to establish
          the connection to the LDAP server.

   $g_ldap_uid_field
          The LDAP field for username. Defaults to uid.

          For Active Directory, set to sAMAccountName.

   $g_ldap_realname_field
          The LDAP field for the user's real name (i.e. common
          name). Defaults to cn.

   $g_use_ldap_realname
          Use the realname specified in LDAP (ON) rather than the
          one stored in the database (OFF). Defaults to OFF.

          Note that MantisBT will update the database with the
          data retrieved from LDAP when ON.

   $g_use_ldap_email
          Use the email address specified in LDAP (ON) rather than
          the one stored in the database (OFF). Defaults to OFF.

          Note that MantisBT will update the database with the
          data retrieved from LDAP when ON.

   $g_ldap_simulation_file_path
          This configuration option allows replacing the ldap
          server with a comma-delimited text file for development
          or testing purposes.

          The LDAP simulation file format is as follows:

              One line per user
              Each line has 4 comma-delimited fields
                  - username,
                  - realname,
                  - e-mail,
                  - password
              Any extra fields are ignored

          On production systems, this option should be set to ''.
          This is the default.

   $g_ldap_port
          Deprecated since MantisBT release 1.2.0a1.

          The LDAP server port number should be defined as part of
          the URI in $g_ldap_server instead (see above).
     __________________________________________________________

5.20. Status Settings

   $g_bug_submit_status
          Status to assign to the bug when submitted. Default
          value is NEW_.

   $g_bug_assigned_status
          Status to assign to the bug when assigned. Default value
          is ASSIGNED.

   $g_bug_reopen_status
          Status to assign to the bug when reopened. Default value
          is FEEDBACK.

   $g_bug_feedback_status
          Status to assign to the bug when feedback is required
          from the issue reporter. Once the reporter adds a note
          the status moves back from feedback to
          $g_bug_assigned_status or $g_bug_submit_status based on
          whether the bug assigned or not.

   $g_reassign_on_feedback
          When a note is added to a bug currently in
          $g_bug_feedback_status, and the note author is the bug's
          reporter, this option will automatically set the bug
          status to $g_bug_submit_status or $g_bug_assigned_status
          if the bug is assigned to a developer. Defaults to
          enabled.

   $g_bug_reopen_resolution
          Resolution to assign to the bug when reopened. Default
          value is REOPENED.

   $g_auto_set_status_to_assigned
          Automatically set status to $g_bug_assigned_status
          whenever a bug is assigned to a person. Installations
          where assigned status is to be used when the defect is
          in progress, rather than just put in a person's queue
          should set it to OFF. Default is ON.

   $g_bug_resolved_status_threshold
          Bug is resolved, ready to be closed or reopened. In some
          custom installations a bug maybe considered as resolved
          when it is moved to a custom (FIXED OR TESTED) status.

   $g_bug_resolution_fixed_threshold
          Threshold resolution which denotes that a bug has been
          resolved and successfully fixed by developers.
          Resolutions above this threshold and below
          $g_bug_resolution_not_fixed_threshold are considered to
          be resolved successfully. Default value is FIXED.

   $g_bug_resolution_not_fixed_threshold
          Threshold resolution which denotes that a bug has been
          resolved without being successfully fixed by developers.
          Resolutions above this threshold are considered to be
          resolved in an unsuccessful way. Default value is
          UNABLE_TO_DUPLICATE.

   $g_bug_readonly_status_threshold
          $g_update_readonly_bug_threshold
          Bug becomes readonly if its status is >=
          $g_bug_readonly_status_threshold. The bug becomes
          read/write again if re-opened and its status becomes
          less than this threshold. The default is RESOLVED. Once
          the bug becomes readonly, a user with an access level
          greater than or equal to
          $g_update_readonly_bug_threshold can still edit the bug.

   $g_status_enum_workflow
          'status_enum_workflow' defines the workflow, and
          reflects a simple 2-dimensional matrix. For each
          existing status, you define which statuses you can go to
          from that status, e.g. from NEW_ you might list statuses
          '10:new,20:feedback,30:acknowledged' but not higher
          ones.The default is no workflow, where all states are
          accessible from any others.

   $g_report_bug_threshold
          This is the access level required to open a bug. The
          default is REPORTER.

   $g_update_bug_threshold
          This is the access level generally required to update
          the content of a bug. The default is UPDATER.

   $g_handle_bug_threshold
          This is the access level generally required to be access
          level needed to be listed in the assign to field. The
          default is DEVELOPER. If a more restrictive setting can
          be determined from $g_set_status_threshold, it will be
          used.

   $g_update_bug_status_threshold $g_set_status_threshold
          These settings control the access level required to
          promote a bug to a new status once the bug is
          opened.$g_set_status_threshold is an array indexed by
          the status value that allows a distinct setting for each
          status. It defaults to blank.If the appropriate status
          is not defined above, $g_update_bug_status_threshold is
          used instead. The default is DEVELOPER.

   $g_allow_close_immediately
          If set, bugs are allowed to be resolved and closed in
          one action. The default is OFF.

   $g_allow_reporter_close
          If set, the bug reporter is allowed to close their own
          bugs, regardless of their access level. The default is
          OFF.

   $g_allow_reporter_reopen
          If set, the bug reporter is allowed to reopen their own
          bugs once resolved, regardless of their access level.
          This allows the reporter to disagree with the
          resolution. The default is ON.

   See also: Customizing Status Values
     __________________________________________________________

5.21. Filters

   $g_filter_by_custom_fields
          Show custom fields in the filter dialog and use these in
          filtering. Defaults to ON.

   $g_filter_custom_fields_per_row
          The number of custom fields to display per row. The
          default is 7. The value should be greater than or equal
          to 7.

   $g_view_filters = SIMPLE_DEFAULT;
          Controls the display of the filter pages. Possible
          values are:

          + SIMPLE_ONLY - only simple view
          + ADVANCED_ONLY - only advanced view (allows multiple
            value selections)
          + SIMPLE_DEFAULT - defaults to simple view, but shows a
            link for advanced
          + ADVANCED_DEFAULT - defaults to advanced view, but
            shows a link for simple

   $g_dhtml_filters = OFF;
          Controls the use of DHTML filters that will display the
          filter in view page using DHTML and javascript. Default
          is OFF. This requires $g_use_javascript to ne set to ON.
          This may not work in all browsers as it requires
          xmlhttprequest functionality.

   $g_create_permalink_threshold
          The threshold required for users to be able to create
          permalinks (default DEVELOPER). To turn this feature off
          use NOBODY.

   $g_create_short_url
          The service to use to create a short URL. The %s will be
          replaced by the long URL. By default http://www.tinyurl
          service is used to shorten URLs.
     __________________________________________________________

5.22. Misc

   $g_user_login_valid_regex
          The regular expression to use when validating new user
          login names. The default regular expression allows a-z,
          A-Z, 0-9, +, -, dot, space and underscore. If you change
          this, you may want to update the ERROR_USER_NAME_INVALID
          string in the language files to explain the rules you
          are using on your site.

          See Wikipedia for more details about regular
          expressions. For testing regular expressions, use
          Rubular.

   $g_monitor_bug_threshold
          Access level needed to monitor bugs. The default value
          is REPORTER.

   $g_monitor_add_others_bug_threshold
          Access level needed to add other users to the list of
          users monitoring a bug. The default value is DEVELOPER.

   $g_monitor_delete_others_bug_threshold
          Access level needed to delete other users from the list
          of users monitoring a bug. The default value is
          DEVELOPER.

   $g_limit_reporters
          Limit reporters to only viewing bugs that they report.

   $g_allow_reporter_close
          Allow reporters to close the bugs they reported.

   $g_allow_close_immediately
          Allow developers and above to close bugs immediately
          when resolving bugs.

   $g_allow_bug_delete_access_level
          Allow the specified access level and above to delete
          bugs.

   $g_bug_move_access_level
          Allow the specified access level and above to move bugs
          between projects.

   $g_allow_account_delete
          Allow users to delete their own accounts.

   $g_allow_anonymous_login
          Enable anonymous access to Mantis. You must also specify
          $g_anonymous_account as the account which anonymous
          users will browse Mantis with. The default setting is
          OFF.

   $g_anonymous_account
          Define the account which anonymous users will assume
          when using Mantis. This account is considered by Mantis
          to be protected from modification. In other words, this
          account can only be modified by users with an access
          level equal to or higher than $g_manage_user_threshold.
          Anonymous users will not be able to adjust preferences
          or change account settings like normal users can.

          You will need to create a new account to use for this
          $g_anonymous_account setting. When creating the account
          you should specify a password, email address and so
          forth in the same way you'd create any other account. It
          is suggested that the access level for this account be
          set to VIEWER or some other read only level.

          The anonymous user account will not receive standard
          notifications and can not monitor issues.

          The default setting is blank/undefined. You only need to
          define this setting when $g_allow_anonymous_login is set
          to ON.

   $g_cvs_web
          This allows for quick linking to CVS files via CVSweb or
          ViewCVS.

   $g_bug_link_tag
          If a number follows this tag it will create a link to a
          bug. Default is '#'.

          + '#': a link would be #45
          + 'bug:' a link would be bug:98

   $g_bugnote_link_tag
          If a number follows this tag it will create a link to a
          bug note. Default is '~'.

          + '~': a link would be ~45
          + 'bugnote:' a link would be bugnote:98

   $g_show_timer
          Time page loads. Shows at the bottom of the page.

   $g_show_queries_count
          Shows the total number/unique number of queries executed
          to serve the page. Default is ON.

   $g_show_queries_list
          Shows the list of all queries that are executed in
          chronological order from top to bottom. This option is
          only effective when $g_show_queries_count is ON. Default
          is OFF. WARNING: Potential security hazard. Only turn
          this on when you really need it (for debugging or
          profiling)

   $g_register_globals
          If your register_globals is Off then set this to OFF.
          Check your register_globals setting in php.ini or
          phpinfo().

   $g_enable_project_documentation
          Specifies whether to enable support for project
          documents or not. Default is OFF. This feature is
          deprecated and is expected to be moved to a plugin in
          the future.

   $g_admin_site_threshold
          Threshold at which a user is considered to be a site
          administrator. These users have the highest level of
          access to your Mantis installation. This access level is
          required to change key Mantis settings (such as server
          paths) and perform other administrative duties. You may
          need to change this value from the default of
          ADMINISTRATOR if you have defined a new access level to
          replace the default ADMINISTRATOR level in
          constant_inc.php.

 Warning

         This is a potentially dangerous configuration option. Users at
         or above this threshold value will have permission to all
         aspects of Mantis including the admin/ directory. With this
         access level, users can damage your installation of Mantis,
         destroy your database or have elevated access to your server.
         DO NOT CHANGE THIS VALUE UNLESS YOU ABSOLUTELY KNOW WHAT YOU'RE
         DOING. BE VERY CAREFUL WITH CHANGING THIS CONFIGURATION VALUE
         FROM THE DEFAULT SETTING.

   $g_view_configuration_threshold
          Threshold for users to view the raw system
          configurations as stored in the database. The default
          value is ADMINISTRATOR.

   $g_set_configuration_threshold
          Threshold for users to set the system configurations
          generically via MantisBT web interface. WARNING: Users
          who have access to set configuration via the interface
          MUST be trusted. This is due to the fact that such users
          can set configurations to PHP code and hence there can
          be a security risk if such users are not trusted. The
          default value is ADMINISTRATOR.

   $g_csv_add_bom
          Add Byte Order Mark (BOM) at the begining of the file as
          it helps Excel display the file in UTF-8. The default
          value is OFF;
     __________________________________________________________

5.23. Cookies

   $g_cookie_path
          Specifies the path under which a cookie is visible.

          All scripts in this directory and its sub-directories
          will be able to access MantisBT cookies.

          Default value is '/'. It is recommended to set this to
          the actual MantisBT path.

   $g_cookie_domain
          The domain that the MantisBT cookies are available to.

   $g_cookie_version
          Version of the view_all_page cookie.

          This is used as a prefix for cookies that should be
          expired when the code is changed in a certain way. The
          developers would increase this version when necessary,
          which in effect will cause the creation of new cookies
          that are compatible with the new code.

          It is not expected for the user to need to change this
          setting.

   $g_cookie_prefix
          Prefix for all MantisBT cookies

          This should be an identifier which does not include
          spaces or periods, and should be unique per MantisBT
          installation, especially if $g_cookie_path is not
          restricting the cookies' scope to the actual MantisBT
          directory.

          It applies to the cookies listed below. Their actual
          names are calculated by prepending the prefix, and it is
          not expected for the user to need to change these.

          + $g_string_cookie
          + $g_project_cookie
          + $g_view_all_cookie
          + $g_manage_users_cookie
            Stores the filter criteria for the Manage Users page
          + $g_manage_config_cookie
            Stores the filter criteria for the Manage Config
            Report page
          + $g_logout_cookie
          + $g_bug_list_cookie
     __________________________________________________________

5.24. Database Tables

   MantisBT enables users to configure a table prefix for all its
   tables. This is useful to be able to have multiple MantisBT
   installation in the same database. The advantage of that is for
   users who are limited by their ISP to have one database.

   $g_db_table_prefix
          Specifies the prefix to be use for all table names. The
          default value is 'mantis'. If you override the default
          prefix, make sure to update doc/db_generate.sql file
          before generating your database. The other option is to
          import db_generate.sql as is, then rename the tables to
          match the new prefix.

          The prefix is used to help make sure table names are
          unique. This is useful for users who are limited to one
          database.

     Note

          The table name for each of the tables is stored in a variable
          which is calculated based on this configuration option. If you
          change the prefix you have to make sure these variables are
          re-calculated (by adding these calculation statements to
          config_inc.php after assigning the new prefix). An example of
          these variables is: $g_mantis_bug_file_table
     __________________________________________________________

5.25. Speed Optimisation

   $g_compress_html
          This option is used to enable buffering/compression of
          HTML output if the user's browser supports it. Default
          value is ON. This option will be ignored in the
          following scenarios:

          + If php.ini has zlib.output_compression enabled.
          + If php.ini has output_handler set to a handler.
          + If PHP does not include the zlib extension (PHP 4.3.0
            and later include zlib extension by default).

          You can check the loaded modules in your PHP by running
          "php -m" on the command line, or by using php_info()
          command in a php script.

   $g_use_persistent_connections
          Use persistent database connections, setting this to ON
          will open the database once per connection, rather than
          once per page. There might be some scalability issues
          here and that is why it is defaulted to OFF.
     __________________________________________________________

5.26. Reminders

   Sending reminders is a feature where a user can notify / remind
   other users about a bug. In the past, only selected users like
   the managers, or developers would get notified about bugs.
   However, these people can not invite other people (through
   MantisBT) to look at or monitor these bugs.

   This feature is useful if the Manager needs to get feedback
   from testers / requirements team about a certain bug. It avoid
   needing this person to do this manual outside MantisBT. It also
   records the history of such reminders.

   $g_store_reminders
          Specifies if reminders should be stored as bugnotes. The
          bugnote will still reflect that it is a reminder and
          list the names of users that got it. Default is ON.

   $g_reminder_recipients_monitor_bug
          Specifies if users who receive reminders about a bug,
          should be automatically added to the monitor list of
          that bug. Default is ON.
     __________________________________________________________

5.27. Bug History

   Bug history is a feature where MantisBT tracks all
   modifications that are made to bugs. These include everything
   starting from its creation, till it is closed. For each change,
   the bug history will record the time stamp, user who made the
   change, field that changed, old value, and new value.

   Independent of the these settings, MantisBT will always track
   the changes to a bug and add them to its history.

   $g_history_default_visible
          Make the bug history visible by default. If this option
          is not enabled, then the user will have to click on the
          Bug History link to see the bug history. Default is ON.

   $g_history_order
          Show bug history entries in ascending or descending
          order. Default value is 'ASC'.
     __________________________________________________________

5.28. Sponsorship

   $g_enable_sponsorship
          enable/disable the whole issue sponsorship feature. The
          default os OFF.

   $g_sponsorship_currency
          The currency string used for all sponsorships. The
          default is 'US$'.

   $g_minimum_sponsorship_amount
          The minimum sponsorship amount that can be entered. If
          the user enters a value less than this, an error will be
          flagged. The default is 5.

   $g_view_sponsorship_total_threshold
          The access level threshold needed to view the total
          sponsorship for an issue by all users. The default is
          VIEWER.

   $g_view_sponsorship_details_threshold
          The access level threshold needed to view the details of
          the sponsorship (i.e., who will donate what) for an
          issue by all users. The default is VIEWER.

   $g_sponsor_threshold
          The access level threshold needed to allow user to
          sponsor issues. The default is REPORTER. Note that
          sponsoring user must have their email set in their
          profile.

   $g_handle_sponsored_bugs_threshold
          The access level required to be able to handle sponsored
          issues. The default is DEVELOPER.

   $g_assign_sponsored_bugs_threshold
          The access level required to be able to assign a
          sponsored issue to a user with access level greater or
          equal to 'handle_sponsored_bugs_threshold'. The default
          is MANAGER.
     __________________________________________________________

5.29. Source Control Integration

   Note that the script expects to be invoked with UTF-8 input. If
   you have a program which outputs text in a different encoding
   the results may be incorrect.

   $g_source_control_account
          Account to be used by the source control script. The
          account must be enabled and must have the appropriate
          access level to add notes to all issues even private
          ones (DEVELOPER access recommended). The default is ''
          (not set).

   $g_source_control_notes_view_status
          This sets whether the note added will be public or
          private (VS_PUBLIC or VS_PRIVATE). For open source
          projects it is expected that the notes be public,
          however, for non-open source it will probably be
          VS_PRIVATE. The default is VS_PRIVATE.

   $g_source_control_set_status_to
          If set to a status, then after a checkin, the issue
          status is set to the specified status, otherwise if set
          to OFF, the issue status is not affected. The default is
          OFF.

   $g_source_control_regexp
          Regular expression used to detect issue ids within
          checkin comments. See preg_match_all() documentation for
          more details on setting a pattern. The default is
          "/\bissue [#]{0,1}(\d+)\b/i" (e.g., issue #745).
     __________________________________________________________

5.30. Custom Fields

   $g_manage_custom_fields_threshold
          Access level needed to manage custom fields. The default
          is ADMINISTRATOR.

   $g_custom_field_link_threshold
          Access level needed to link a custom field to a project.
          The default is MANAGER.

   $$g_custom_field_edit_after_create
          This flag determines whether to start editing a custom
          field immediately after creating it, or return to the
          definition list. The default is ON (edit the custom
          field after creating).
     __________________________________________________________

5.31. My View Settings

   $g_my_view_boxes
          This is an array of values defining the order that the
          boxes to be shown. A box that is not to be shown can
          have its value set to 0. The default is:

$g_my_view_boxes = array ( 'assigned' => '1',
                            'unassigned' => '2',
                            'reported' => '3',
                            'resolved' => '4',
                            'recent_mod' => '5',
                            'monitored' => '6'
                            );

          If you want to change the definition, copy the default
          value and apply the changes.

   $g_my_view_bug_count
          Number of bugs shown in each box. The default is 10.

   $g_default_home_page
          Default page to transfer to after Login or Set Project.
          The default is 'my_view_page.php'. An alternative would
          be 'view_all_bugs_page.php' or 'main_page.php'.
     __________________________________________________________

5.32. Relationship Graphs

   $g_relationship_graph_enable
          This enables the relationship graphs feature where
          issues are represented by nodes and relationships as
          links between such nodes. Possible values are ON or OFF.
          Default is OFF.

          This feature requires installing GraphViz (all OSes
          except Windows) or WinGraphviz (only Windows). Refer to
          the notes near the top of core/graphviz_api.php and
          core/relationship_graph_api.php for more information.

   $g_relationship_graph_fontname
          Font name and size, as required by Graphviz. If Graphviz
          fails to run for you, you are probably using a font name
          that gd PHP extension can't find. On Linux, try the name
          of the font file without the extension. The default
          value is 'Arial'.

   $g_relationship_graph_fontsize
          Font size, default is 8.

   $g_relationship_graph_orientation
          Default dependency orientation. If you have issues with
          lots of children or parents, leave as 'horizontal',
          otherwise, if you have lots of "chained" issue
          dependencies, change to 'vertical'. Default is
          'horizontal'.

   $g_relationship_graph_max_depth
          Max depth for relation graphs. This only affects
          relationship graphs, dependency graphs are drawn to the
          full depth. The default value is 2.

   $g_relationship_graph_view_on_click
          If set to ON, clicking on an issue on the relationship
          graph will open the bug view page for that issue,
          otherwise, will navigate to the relationship graph for
          that issue.

   $g_dot_tool
          The full path for the dot tool. The webserver must have
          execute permission to this program in order to generate
          relationship graphs. This configuration option is not
          relevant for Windows. The default value is
          '/usr/bin/dot'.

   $g_neato_tool
          The full path for the neato tool. The webserver must
          have execute permission to this program in order to
          generate relationship graphs. This configuration option
          is not relevant for Windows. The default value is
          '/usr/bin/neato'.
     __________________________________________________________

5.33. Sub-Projects

   $g_show_extended_project_browser
          Whether to use the extended project selector, where top
          level projects have their separate selector, and
          sub-projects have another. If OFF, there will be one
          combo box at the top right to select the
          project/sub-project. If ON, there will be two. The
          default is OFF.

   $g_subprojects_inherit_versions
          Whether sub-projects should inherit versions from parent
          projects. For project X which is a sub-project of A and
          B, it will have versions from X, A and B. The default
          value is ON.

   $g_subprojects_inherit_categories
          Whether sub-projects should inherit categories from
          parent projects. For project X which is a sub-project of
          A and B, it will have categories from X, A and B. The
          default value is ON.
     __________________________________________________________

5.34. Field Visibility

   $g_enable_eta
          Enable or disable usage of 'ETA' field. Default value is
          OFF.

   $g_enable_projection
          Enable or disable usage of 'Projection' field. Default
          value is OFF.

   $g_show_product_build
          Enable or disable usage of 'Product Build' field.
          Default is OFF.

   $g_bug_report_page_fields
          An array of fields to show on the issue view page. Some
          of these fields may be filtered out if their features
          are disabled or if the user doesn't have access to view
          them. See BUG_FIELD_* in constant_inc.php for all
          possible values.

          The following fields can not be included: BUG_FIELD_ID,
          BUG_FIELD_PROJECT, BUG_FIELD_DATE_SUBMITTED,
          BUG_FIELD_LAST_UPDATED, BUG_FIELD_STATUS,
          BUG_FIELD_RESOLUTION, BUG_FIELD_TAGS,
          BUG_FIELD_FIXED_IN_VERSION, BUG_FIELD_PROJECTION,
          BUG_FIELD_ETA, BUG_FIELD_REPORTER.

          The following fields must be included:
          BUG_FIELD_CATEGORY, BUG_FIELD_SUMMARY,
          BUG_FIELD_DESCRIPTION.

          To overload these settings per project, then the
          settings must be included in the database through the
          generic configuration form. Note that the array in the
          database should consistent of the values of the
          constants below. For example, replace BUG_FIELD_CATEGORY
          with 'category_id'. See constant_inc.php for the values
          of the constants.

   $g_bug_view_page_fields
          An array of fields to show on the issue view page. Some
          of these fields may be filtered out if their features
          are disabled or if the user doesn't have access to view
          them. See BUG_FIELD_* in constant_inc.php for all
          possible values.

          To overload this setting per project, then the setting
          must be included in the database through the generic
          configuration form. Note that the array in the database
          should consistent of the values of the constants. For
          example, replace BUG_FIELD_CATEGORY with 'category_id'.
          See constant_inc.php for the values of the constants.

   $g_bug_print_page_fields
          An array of fields to show on the issue print page. Some
          of these fields may be filtered out if their features
          are disabled or if the user doesn't have access to view
          them. See BUG_FIELD_* in constant_inc.php for all
          possible values.

   $g_bug_update_page_fields
          An array of fields to show on the issue update page.
          Some of these fields may be filtered out if their
          features are disabled or if the user doesn't have access
          to view them. See BUG_FIELD_* in constant_inc.php for
          all possible values.

          To overload this setting per project, then the setting
          must be included in the database through the generic
          configuration form. Note that the array in the database
          should consistent of the values of the constants. For
          example, replace BUG_FIELD_CATEGORY with 'category_id'.
          See constant_inc.php for the values of the constants.

   $g_bug_change_status_page_fields
          An array of fields to show on the issue change status
          page. Some of these fields may be filtered out of their
          features are disabled or if the user doesn't have access
          to view them. See BUG_FIELD_* in constant_inc.php for
          all possible values.

          To overload this setting per project, then the setting
          must be included in the database through the generic
          configuration form. Note that the array in the database
          should consistent of the values of the constants. For
          example, replace BUG_FIELD_CATEGORY with 'category_id'.
          See constant_inc.php for the values of the constants.
     __________________________________________________________

5.35. System Logging

   The system logging interface is used to extract detailed
   debugging information for the MantisBT system. It can also
   serve as an audit trail for user actions.

   $g_log_level
          This controls the type of logging information recorded.
          Possible values include:

        LOG_AJAX

        LOG_DATABASE

        LOG_EMAIL
                logs issue id, message type and recipients for all
                emails sent

        LOG_EMAIL_RECIPIENT
                logs the details of email recipient determination.
                Each user id is listed as well as why they are
                added, or deleted from the recipient list

        LOG_FILTERING

        LOG_LDAP
                logs the details of LDAP operations

          Multiple logging levels can be combined by using an
          inclusive or operator, e.g. LOG_EMAIL |
          LOG_EMAIL_RECIPIENT

   $g_log_destination
          specifies the file where the log data goes. This file
          must be writable by the web server userid running
          MantisBT. Right now, only "file:<file path>" is
          supported. For example, $g_log_destination =
          'file:/tmp/mantis_log'; See http://www.php.net/error_log
          for details.
     __________________________________________________________

5.36. Time Tracking

   $g_time_tracking_enabled
          Turns Time Tracking features ON or OFF - Default is OFF

   $g_time_tracking_without_note
          Allow time tracking to be recorded without writing some
          text in the associated bugnote - Default is ON

   $g_time_tracking_with_billing
          Adds calculation links to workout how much time has been
          spent between a particular time frame. Currently it will
          allow you to enter a cost/hour and will work out some
          billing information. This will become more extensive in
          the future. Currently it is more of a proof of concept.

   $g_time_tracking_stopwatch
          Instead of a text field turning this option on places a
          stopwatch on the page with Start/Stop and Reset buttons
          next to it. You must have $g_use_javascript switched on
          for this to take effect. A bit gimmicky, but who cares.

   $g_time_tracking_view_threshold
          Access level required to view time tracking information
          - Default DEVELOPER.

   $g_time_tracking_edit_threshold
          Access level required to add/edit time tracking
          information (If you give a user
          $g_time_tracking_edit_threshold you must give them
          $g_time_tracking_view_threshold aswell) - Default
          DEVELOPER.

   $g_time_tracking_reporting_threshold
          Access level required to run reports (not completed yet)
          - Default MANAGER.
     __________________________________________________________

5.37. SOAP API

   These options are used to control the behaviour of the MantisBT
   SOAP API and are usually configured in
   api/soap/mc_config_inc.php.

   $g_mc_use_nusoap
          Flag controlling the library to use for SOAP
          communication. When the native PHP extension is
          available this flag default to OFF, which means that
          nusoap will not used. The native extension has the
          advantage of being faster, more memory efficient and
          maintained to work with recent versions on PHP. When the
          extension is not available MantisBT falls back to using
          nusoap.
     __________________________________________________________

5.38. MantisTouch

   These options are used to integrate with MantisTouch
   (http://www.mantistouch.org) to provide experience targeted to
   mobile devices.

   $g_mantistouch_url
          The MantisTouch URL to direct to. The %s will be
          replaced by the contents of $g_path configuration
          option. A blank value will disable redirection. The %s
          is not required when redirecting to MantisTouch
          instances that point to a single MantisBT instance and
          hence have a hard-coded URL. Examples include: ''
          (default), 'http://mantisbt.mobi?url=%s', and
          'http://MyOwnMantisTouch.com/'.
     __________________________________________________________

Chapter 6. Page descriptions

6.1. Login page

   Just enter your username and password and hit the login button.
   There is also a Save Login checkbox to have the package
   remember that you are logged in between browser sessions. You
   will have to have cookies enabled to login.If the account
   doesn't exist, the account is disabled, or the password is
   incorrect then you will remain at the login page. An error
   message will be displayed.The administrator may allow users to
   sign up for their own accounts. If so, a link to Signup for
   your own account will be available.The administrator may also
   have anonymous login allowed. Anonymous users will be logged in
   under a common account.You will be allowed to select a project
   to work in after logging in. You can make a project your
   default selection from the Select Project screen or from your
   Account Options.SignupHere you can signup for a new account.
   You must supply a valid email address and select a unique
   username. Your randomly generated password will be emailed to
   your email account. If MantisBT is setup so that the email
   password is not to be emailed, newly generated accounts will
   have an empty password.
     __________________________________________________________

6.2. Main page

   This is the first page you see upon logging in. It shows you
   the latest news updates for the bugtracker. This is a simple
   news module (based off of work by Scott Roberts) and is to keep
   users abreast of changes in the bugtracker or project. Some
   news postings are specific to projects and others are global
   across the entire bugtracker. This is set at the time of
   posting in the Edit News section.The number of news posts is
   controlled by a global variable. When the number of posts is
   more than the limit, a link to show "older news" is displayed
   at the bottom. Similarly a "newer news" is displayed when you
   have clicked on "older news".There is an Archives option at the
   bottom of the page to view all listings.ArchivesA
   title/date/poster listing of ALL past news articles will be
   listed here. Clicking on the link will bring up the specified
   article. This listing will also only display items that are
   either global or specific to the selected project.
     __________________________________________________________

6.3. View Issues page

   Here we can view the issue listings. The page has a set of
   viewing filters at the top and the issues are listed
   below.FiltersThe filters control the behavior of the issues
   list. The filters are saved between browsing sessions but do
   not currently save sort order or direction.If the number of
   issues exceeds the "Show" count in the filter a set of
   navigation to go to "First", "Last", "Previous", "Next" and
   specific page numbers are added.The Search field will look for
   simple keyword matches in the summary, description, steps to
   reproduce, additional information, issue id, or issue text id
   fields. It does not search through issue notes. Issue List -
   The issues are listed in a table and the attributes are listed
   in the following order: priority, id, number of issue notes,
   category, severity, status, last updated, and summary. Each
   (except for number of issue notes) can be clicked on to sort by
   that column. Clicking again will reverse the direction of the
   sort. The default is to sort by last modification time, where
   the last modified issue appears at the top. The issue id is a
   link that leads to a more detailed report about the issue. You
   can also add issue notes here. The number in the issue note
   count column will be bold if an issue note has been added in
   the specified time frame. The addition of an issue note will
   make the issue note link of the issue appear in the unvisited
   state. The text in the "Severity" column will be bold if the
   severity is major, crash, or block and the issue not resolved.
   The text in the "Updated" column will be bold if the issue has
   changed in the last "Changed(hrs)" field which is specified in
   the viewing filters. Each table row is color coded according to
   the issue status. The colors can be customised through MantisBT
   Configuration Severities block - prevents further work/progress
   from being made crash - crashes the application or blocking,
   major - major issue, minor - minor issue, tweak - needs
   tweaking, text - error in the text, trivial - being nit picky,
   feature - requesting new feature - Status new - new issue,
   feedback - issue requires more information from reporter,
   acknowledged - issue has been looked at but not confirmed or
   assigned, confirmed - confirmed and reproducible (typically set
   by an Updater or other Developer), assigned - assigned to a
   Developer, resolved - issue should be fixed, waiting on
   confirmation of fix, closed - issue is closed, Moving the mouse
   over the status text will show the resolution as a title. This
   is rendered by some browsers as a bubble and in others as a
   status line text.
     __________________________________________________________

6.4. Issue View page

   Here is the simple listing of the issue report. Most of the
   fields are self-explanatory. "Assigned To" will contain the
   developer assigned to handle the issue. Priority is fully
   functional but currently does nothing of importance. Duplicate
   ID is used when an issue is a duplicate of another. It links to
   the duplicate issue which allows users to read up on the
   original issue report. Below the issue report is a set of
   buttons that a user can select to work on the issue.

     * Update Issue - brings up a page to edit all aspects of the
       issue
     * Assign to - in conjunction with the dropdown list next top
       the button, this is a shortcut to change the assignment of
       an issue
     * Change Status to - in conjunction with the dropdown list
       next top the button, this is a shortcut to change the
       status of an issue. Another page (Change Status) will be
       presented to allow the user to add notes or change relevant
       information
     * Monitor / Unmonitor Issue - allows the user to monitor any
       additions to the issue by email
     * Create Clone - create a copy of the current issue. This
       presents the user with a new issue reporting form with all
       of the information in the current issue filled in. Upon
       submission, a new issue, related to the current issue, will
       be created.
     * Reopen Issue - Allows the user to re-open a resolved issue
     * Move Issue - allows the user to move the issue to another
       project
     * Delete Issue - Allows the user to delete the issue
       permanently. It is recommended against deleting issues
       unless the entry is frivolous. Instead issues should be set
       to resolved and an appropriate resolution category chosen.

   A panel is provided to view and update the sponsorship of an
   issue.Another panel is provided to view, delete and add
   relationships for an issue. Issues can have a parent/child
   relationship, where the user is warned about resolving a parent
   issue before all of the children are resolved. A peer
   relationship is also possible.Below this, there may be a form
   for uploading file attachments. The Administrator needs to
   configure the bugtracker to handle file uploads. If uploading
   to disk is selected, each project needs to set its own upload
   path. Issue notes are shown at the bottom of the issue report.
   A panel to add issue notes is also shown.
     __________________________________________________________

6.5. Issue Change Status page

   This page is used to change the status of an issue. A user can
   add an issue note to describe the reason for change.In
   addition, the following fields may be displayed for update:

     * Resolution and Duplicate ID - for issues being resolved or
       closed
     * Issue Handler (Assigned to)
     * any Custom Fields that are to be visible on update or
       resolution
     * Fixed in Version - for issues being resolved
     * Close Immediately - to immediately close a resolved issue
     __________________________________________________________

6.6. Issue Edit page

   The layout of this page resembles the Simple Issue View page,
   but here you can update various issue fields. The Reporter,
   Category, Severity, and Reproducibility fields are editable but
   shouldn't be unless there is a gross mis-categorization.Also
   modifiable are the Assigned To, Priority, Projection, ETA,
   Resolution, and Duplicate ID fields.As per version 0.18.0, the
   user can also add an issue note as part of an issue update.
     __________________________________________________________

6.7. My Account Page

   This page changes user alterable parameters for the system.
   These selections are user specific.My AccountThis allows the
   user to change their password, screen name, and email address.
   It also reports the user's access levels on the current and
   other projects.
     __________________________________________________________

6.7.1. Preferences

   This sets the following information:

     * Default project
     * whether the pages used for reporting, viewing, and updating
       are the simple or advanced views
     * the delay in minutes between refreshes of the view all
       issues page
     * the delay in seconds when redirecting from a confirmation
       page to the display page
     * the time order in which notes will be sorted
     * whether to filter email messages based on type of message
       and severity
     * the number of notes to append to notification emails
     * the default language for the system. The additional setting
       of "auto" will use the browser's default language for the
       system.
     __________________________________________________________

6.7.2. Profiles

   Profiles are shortcuts to define the values for Platform, OS,
   and version. This page allows you to define and edit personal
   shortcuts.
     __________________________________________________________

6.8. System Management Pages

   A number of pages exist under the "Manage" link. These will
   only be visible to those who have an appropriate access level.
     __________________________________________________________

6.8.1. Manage Users

   This page allow an administrator to manage the users in the
   system.It essentially supplies a list of users defined in the
   system. The user names are linked to a page where you can
   change the user's name, access level, and projects to which
   they are assigned. You can also reset their passwords through
   this page.At the top, there is also a list of new users (who
   have created an account in the last week), and accounts where
   the user has yet to log in.New users are created using the
   "Create User" link above the list of existing users. Note that
   the username must be unique in the system. Further, note that
   the user's real name (as displayed on the screen) cannot match
   another user's user name.
     __________________________________________________________

6.8.2. Manage Projects Page

   This page allows the user to manage the projects listed in the
   system.Each project is listed along with a link to manage that
   specific project. The specific project pages allow the user to
   change:

     * the project name
     * the project description
     * its status
     * whether the project is public or private. Private projects
       are only visible to users who are assigned to it or users
       who have the access level to automatically have access to
       private projects (eg: administrators).
     * afile directory used to store attachments for issues and
       documents associated with the project. This folder is
       located on the webserver, it can be absolute path or path
       relative to the main MantisBT folder. Note that this is
       only used if the files are stored on disk or via FTP. In
       case of FTP, the cached version that is saved on the
       webserver, is stored in the specified path.
     * common subprojects. These are other projects who can be
       considered a sub-project of this one. They can be shared
       amongst multiple projects. For example, a "documentation"
       project may be shared amongst several development projects.
     * project categories. These are used to sub-divide the issues
       stored in the system.
     * project versions. These are used to create ChangeLog
       reports and can be used to filter issues. They are used for
       both the Found In and Fixed In versions.
     * Custom Fields linked to this project
     * Users linked to this project. Here is the place where a
       user's access level may be upgraded or downgraded depending
       on their particular role in the project.
     __________________________________________________________

6.8.3. Manage Custom Fields

   This page is the base point for managing custom fields. It
   lists the custom fields defined in the system. There is also a
   place to enter a new field name to create a new field.The
   "Edit" links take you to a page where you can define the
   details of a custom field. These include it's name, type,
   value, and display information. On the edit page, the following
   information is defined to control the custom field:

     * name
     * type. Possible values are listed below.
     * Value constraints (Possible values, default value, regular
       expression, minimum length, maximum length).
     * Access (who can read and write the field based on their
       access level).
     * Display control (where the field will show up and must be
       filled in

   All fields are compared in length to be greater than or equal
   to the minimum length, and less than or equal to the minimum
   length, unless these values are 0. If the values are 0, the
   check is skipped. All fields are also compared against the
   regular expression. If the value matches the expression, then
   the value is stored. For example, the expression
   "/^-?([0-9])*$/" can be used to constrain an integer.The table
   below describes the field types and the value constraints.

   Type Field Contents Value Constraints
   String text string up to 255 characters
   Numeric an integer
   Float a floating point number
   Enumeration one of a list of text strings Enter the list of
   text strings separated by "|" (pipe character) in the Possible
   Values field. The Default value should match one of these
   strings as well. This will be displayed as a dropdown menu.
   Email an email address string up to 255 characters When
   displayed, the value will also be encapsulated in a mailto:
   reference.
   Checkbox zero or more of a list of text strings Enter the list
   of text strings separated by "|" (pipe character) in the
   Possible Values field. The Default value should match one of
   these strings as well. This will be displayed as a list of text
   strings with a checkbox beside them.
   List one of a list of text strings Enter the list of text
   strings separated by "|" (pipe character) in the Possible
   Values field. The Default value should match one of these
   strings as well. This will be displayed as a multi-line
   dropdown menu.
   Multiselection List zero or more of a list of text strings
   Enter the list of text strings separated by "|" (pipe
   character) in the Possible Values field. The Default value
   should match one of these strings as well. This will be
   displayed as a multi-line dropdown menu.
   Date text string defining a date This is displayed as a set of
   dropdown menus for day, month, and year. Defaults should be
   defined in yyyy-mm-dd format.

   The display entries are used as follows:

   Entry Meaning
   Display Only On Advanced Page If checked, the field will NOT be
   shown on the simple issue displays
   Display When Reporting Issues If checked, the field will be
   shown on the report issues displays
   Display When Updating Issues If checked, the field will NOT be
   shown on the update issue and change status displays
   Display When Resolving Issues If checked, the field will NOT be
   shown on the update issue displays and change status displays,
   if the new status is resolved.
   Display When Closing Issues If checked, the field will NOT be
   shown on the update issue displays and change status displays,
   if the new status is closed.
   Required On Report If checked, the field must be filled in on
   the issue reports.
   Required On Update If checked, the field must be filled in on
   the update issue and change status displays.
   Required On Resolve If checked, the field must be filled in on
   the update issue and change status displays, if the new status
   is resolved.
   Required On Close If checked, the field must be filled in on
   the update issue and change status displays, if the new status
   is closed.

   Notes on Display

     * Be careful not to set both a required attribute and show
       only on advanced display. It may be possible to trigger a
       validation error that the user cannot recover from (i.e.,
       field is not filled in).
     __________________________________________________________

6.8.4. Manage Global Profiles

   This page allows the definition of global profiles accessible
   to all users of the system. It is similar to the user
   definition of a profile consisting of Platform, OS and Version.
     __________________________________________________________

6.8.5. Manage Configuration

   This set of pages control the configuration of the MantisBT
   system. Note that the configuration items displayed may be on a
   project by project basis.These pages serve two purposes. First,
   they will display the settings for the particular aspects of
   the system. If authorized, they will allow a user to change the
   parameters. They also have settings for what access level is
   required to change these settings ON A PROJECT basis. In
   general, this should be left alone, but administrators may want
   to delegate some of these settings to managers.
     __________________________________________________________

6.8.5.1. Workflow Thresholds

   This page covers the adjustment of the settings for many of the
   workflow related parameters. For most of these, the fields are
   self explanatory and relate to a similarly named setting in the
   configuration file. At the right of each row is a selector that
   allows the administrator to lower the access level required to
   change the particular parameter.The values changeable on this
   page are:

   Issues.

   Title Variable Description
   Report an Issue $g_report_bug_threshold threshold to report an
   issue
   Status to which a new issue is set $g_bug_submit_status status
   issue is set to when submitted
   Update an Issue $g_update_bug_threshold threshold to update an
   issue
   Allow Issue to be closed on Resolve $g_allow_close_immediately
   allow close immediately on resolve
   Allow Reporter to close an issue $g_allow_reporter_close allow
   reporter to close issues they reported
   Monitor an issue $g_monitor_bug_threshold threshold to monitor
   an issue
   Handle Issue $g_handle_bug_threshold threshold to handle (be
   assigned) an issue
   Assign Issue $g_update_bug_assign_threshold threshold to be in
   the assign to list
   Move Issue $g_move_bug_threshold threshold to move an issue to
   another project. This setting is for all projects.
   Delete Issue $g_delete_bug_threshold threshold to delete an
   issue
   Reopen Issue $g_reopen_bug_threshold threshold to reopen an
   issue
   Allow reporter to reopen Issue $g_allow_reporter_reopen allow
   reporter to reopen issues they reported
   Status to which a reopened Issue is set $g_bug_reopen_status
   status issue is set to when reopened
   Resolution to which a reopened Issue is set
   $g_bug_reopen_resolution resolution issue is set to when
   reopened
   Status where an issue is considered resolved
   $g_bug_resolved_status_threshold status where bug is resolved
   Status where an issue becomes read-only
   $g_bug_readonly_status_threshold status where bug is read-only
   (see update_readonly_bug_threshold)
   Update readonly issue $g_update_readonly_bug_threshold
   threshold to update an issue marked as read-only
   Update Issue Status $g_update_bug_status_threshold threshold to
   update an issue's status
   View Private Issues $g_private_bug_threshold threshold to view
   a private issue
   Set View Status $g_set_view_status_threshold threshold to set
   an issue to Private/Public
   Update View Status $g_change_view_status_threshold threshold
   needed to update the view status while updating an issue or an
   issue note
   Show list of users monitoring issue
   $g_show_monitor_list_threshold threshold to see who is
   monitoring an issue
   Set status on assignment of handler
   $g_auto_set_status_to_assigned change status when an issue is
   assigned
   Status to set auto-assigned issues to $g_bug_assigned_status
   status issue is set to when assigned
   Limit reporter's access to their own issues $g_limit_reporters
   reporters can see only issues they reported. This setting is
   for all projects.

   Notes.

   Title Variable Description
   Add Notes $g_add_bugnote_threshold threshold to add an issue
   note
   Update Notes $g_update_bugnote_threshold threshold to edit an
   issue note
   Allow users to edit their own bugnotes
   $g_bugnote_allow_user_edit_delete can a user edit/delete their
   own issue notes
   Delete Note $g_delete_bugnote_threshold threshold to delete an
   issue note
   View private notes $g_private_bugnote_threshold threshold to
   view a private issue note

   Others.

   View Change Log    $g_view_changelog_threshold threshold to view
                                                  the changelog
   View Assigned To   $g_view_handler_threshold   threshold to see who
                                                  is handling an issue
   View Issue History $g_view_history_threshold   threshold to view
                                                  the issue history
   Send Reminders     $g_bug_reminder_threshold   threshold to send a
                                                  reminder
     __________________________________________________________

6.8.5.2. Workflow Transitions

   This page covers the status workflow. For most of these, the
   fields are self explanatory and relate to a similarly named
   setting in the configuration file. At the right of each row is
   a selector that allows the administrator to lower the access
   level required to change the particular parameter.The values
   changeable on this page are:

   Table 6-1. Issues
   Title Variable Description
   Status to which a new issue is set $g_bug_submit_status status
   issue is set to when submitted
   Status where an issue is considered resolved
   $g_bug_resolved_status_threshold status where issue is resolved
   Status to which a reopened Issue is set $g_bug_reopen_status
   status issue is set to when reopened

   The matrix that follows has checkmarks where the transitions
   are allowed from the status on the left edge to the status
   listed across the top. This corresponds to the $g_enum_workflow
   array.At the bottom, there is a list of access levels that are
   required to change the status to the value listed across the
   top. This can be used, for instance, to restrict those who can
   close an issue to a specific level, say a manager. This
   corresponds to the $g_set_status_threshold array and the
   $g_report_bug_threshold setting.
     __________________________________________________________

6.8.5.3. Email Notifications

   This page sets the system defaults for sending emails on issue
   related events. MantisBT uses flags and a threshold system to
   generate emails on events. For each new event, email is sent
   to:

     * the reporter
     * the handler (or Assigned to)
     * anyone monitoring the issue
     * anyone who has ever added a issue note the issue
     * anyone assigned to the project whose access level matches a
       range

   From this list, those recipients who meet the following
   criteria are eliminated:

     * the originator of the change, if $g_email_receive_own is
       OFF
     * the recipient either no longer exists, or is disabled
     * the recipient has turned their email_on_<new status>
       preference OFF
     * the recipient has no email address entered

   The matrix on this page selects who will receive messages for
   each of the events listed down the left hand side. The first
   four columns correspond to the first four points listed above.
   The next columns correspond to the access levels defined. Note
   that because a minimum and maximum threshold are used, a
   discontinuous selection is not allowed.
     __________________________________________________________

6.9. Monitor Issue

   The monitor issues feature allows users to subscribe to certain
   issues and hence get copied on all notification emails that are
   sent for these issues.Depending on the configuration, sending a
   reminder to a user about an issue can add this issue to the
   user's list of monitored issues. Users who reported the issue
   or are assigned the issue typically don't need to monitor the
   issue to get the notifications. This is because by default they
   get notified on changes related to the issue anyway. However,
   administrators can change the configuration to disable
   notifications to reporters or handlers in specific scenarios.
     __________________________________________________________

6.10. Reopen Issue

   Re-open issue button is visible in the issue view pages if the
   user has the appropriate access level and the issue is
   resolved/closed. Re-opening a issue will allow users to enter
   issue notes for the re-opening reason. The issue will
   automatically be put into the Feedback status.
     __________________________________________________________

6.11. Delete Issue

   The delete issues button appears on the issue view pages for
   the users who have the appropriate access level. This allows
   you to delete an existing issue. This should only be used on
   frivolous or test issues. A confirmation screen will prompt you
   if you really want to delete the issue. Updaters, Developers,
   Managers, and Administrators can remove issues (you can also
   configure this).
     __________________________________________________________

6.12. Close Issue

   This is a button that appears on the issue view pages for users
   that are authorized to close issues. Depending on the
   configuration, users may be able to close issues without having
   to resolve them first, or may be able to only close resolved
   issues. After the button is clicked, the user is redirected to
   a page where an issue note maybe added.
     __________________________________________________________

6.13. Assign to Me

   This button appears in the issue view pages in case of users
   with access level that is equal to handle_bug_threshold or
   higher. When this button is clicked the issue is assigned to
   the user.
     __________________________________________________________

6.14. Resolve Issue

   This option on the View Issues page allows you to resolve the
   issue. It will lead you to a page where you can set the
   resolution state and a duplicate id (if applicable). After
   choosing that the user can choose to enter an issue note
   detailing the reason for the closure. The issue is then set to
   the Resolved state. The reporter should check off on the issue
   by using the Close Issue button.
     __________________________________________________________

6.15. News Syndication

   MantisBT supports news syndication using RSS v2.0 protocol.
   MantisBT also supports authenticated news feeds for private
   projects or installations where anonymous access is not
   enabled. Authenticated feeds takes a user name and a key token
   that are used to authenticate the user and generate the feed
   results in the context of the user's access rights (i.e. the
   same as what the user would see if they were to logged into
   MantisBT).To get access to the News RSS as anonymous user,
   visit the following
   page: http://www.example.com/mantisbt/news_rss.php While a user
   is logged in, the RSS links provided in the UI will always
   provide links to the authenticated feeds, if no user is logged
   in (i.e. anonymous), then anonymous links will be provided.
     __________________________________________________________

Chapter 7. Customizing MantisBT

7.1. Custom Fields

7.1.1. Overview

   Different teams typically like to capture different information
   as users report issues, in some cases, the data required is
   even different from one project to another. Hence, MantisBT
   provides the ability for managers and administrators to define
   custom fields as way to extend MantisBT to deal with
   information that is specific to their teams or their projects.
   The aim is for this to keep MantisBT native fields to a
   minimum. Following are some facts about the implementation of
   custom fields in MantisBT:

     * Custom fields are defined system wide.
     * Custom fields can be linked to multiple projects.
     * The sequence of displaying custom fields can be different
       per project.
     * Custom fields must be defined by users with access level
       ADMINISTRATOR.
     * Custom fields can be linked to projects by users with
       access level MANAGER or above (by default, this can be
       configurable).
     * Number of custom fields is not restricted.
     * Users can define filters that include custom fields.
     * Custom fields can be included in View Issues, Print Issues,
       and CSV exports.
     * Enumeration custom fields can have a set of static values
       or values that are calculated dynamically based on a custom
       function.
     __________________________________________________________

7.1.2. Custom Field Definition

   The definition of a custom field includes the following logical
   attributes:

     * Caption variable name (eg: This is the value that is
       supplied to lang_get() API, or displayed as-is if not found
       in language file). This should not include any space or any
       character that would be an invalid PHP identifier.
     * Custom field type (string, numeric, float, enumeration,
       email, checkbox, radio, list, multi-selection list, date).
       Type 'string' is used for strings of up to 255 characters.
       Type 'numeric' is used for numerical integer values.
       Type 'float' is used for real (float / double) numbers.
       Type 'enumeration' is used when a user selects one entry
       from a list. The user interface for such type is a
       combo-box.
       Type 'email' is used for storing email addresses.
       Type 'checkbox' is like enumeration but the list is shown
       as checkboxes and the user is allowed to tick more than one
       selection. The default value and the possible value can
       contain multiple values like 'RED|YELLOW|BLUE' (without the
       single quote).
       Type 'radio' is like enumeration but the list is shown as
       radio buttons and th euser is allowed to tick on of the
       options. The possible values can be 'RED|YELLOW|BLUE',
       where the default value can be 'YELLOW'. Note that the
       default value can't contain multiple values.
       Type 'list' is like enumeration but the list is shown as a
       list box where the user is only allowed to select one
       option. The possible values can be 'RED|YELLOW|BLUE', where
       the default value can be 'YELLOW'. Note that the default
       value can't contain multiple values.
       Type 'multi-selection list' is like enumeration but the
       list is shown as a list box where the user is allowed to
       select multiple options. The possible values can be
       'RED|YELLOW|BLUE', where the default value can be
       'RED|BLUE'. Note that in this case the default value
       contains multiple values.
       Type 'date' is for date values. The default value can be
       empty, or {tomorrow}, {yesterday}, {next week}, {last
       week}, {+3 days}, {-2 days}.
     * Enumeration possible values (eg: RED|YELLOW|BLUE). Use the
       pipe ('|') character to separate possible values for an
       enumeration. One of the possible values can be an empty
       string. The set of possible values can also be calculated
       at runtime. For example, "=versions" would automatically
       resolve into all the versions defined for the current
       project.
     * Default value - see details above for a sample default
       value for each type.
     * Minimum/maximum length for the custom field value (use 0 to
       disable). Note that these metrics are not really relevant
       to custom fields that are based on an enumeration of
       possible values.
     * Regular expression to use for validating user input (use
       PCRE syntax).
     * Read Access level: Minimum access level for users to be
       able to see the value of the custom field.
     * Write Access level: Minimum access level for users to be
       able to edit the value of the custom field.
     * Display when reporting issues? - If this custom field
       should be shown on the Report Issue page.
     * Display when updating issues? - If this custom field should
       be shown on the Update Issue page.
     * Display when resolving issues? - If this custom field
       should be shown when resolving an issue. For example, a
       "root cause" custom field would make sense to set when
       resolving the issue.
     * Display when closing issues? - If this custom field should
       be shown when closing an issue.
     * Required on Report - If this custom field is a mandatory
       field on the Report Issue page.
     * Required on Update - If this custom field is a mandatory
       field on the Update Issue page.
     * Required on Resolve - If this custom field is a mandatory
       field when resolving an issue.
     * Required on Close - If this custom field is a mandatory
       field when closing an issue.

   All custom fields are currently saved to a field of type
   VARCHAR(255) in the database. However, in future releases, it
   is possible to support custom fields of different types (eg:
   memo, file).

   If the value of a custom field for a certain defect is not
   found, the default value is assumed.
     __________________________________________________________

7.1.3. Adding/Editing Custom Fields

     * The logged in user needs $g_manage_custom_fields_threshold
       access level.
     * Select "Manage" from the main menu.
     * Select "Manage Custom Fields" from the management menu.
     * In case of edit, click on the name of an existing custom
       field to edit its information.
     * In case of adding a new one, enter the name of the new
       custom field then click "New Custom Field".

   Note

        Added custom fields will not show up in any of the issues until
        the added custom field is linked to the appropriate projects.
     __________________________________________________________

7.1.4. Linking/Unlinking/Ordering Existing Custom Fields in Projects

     * The logged in user needs to have access level that is
       greater than or equal to $g_custom_field_link_threshold and
       $g_manage_project_threshold.
     * Select "Manage" from the main menu.
     * Select "Manage Projects".
     * Select the name of the project to manage.
     * Scroll down to the "Custom Fields" box.
     * Select the field to add from the list, then click "Add This
       Existing Custom Field".
     * To change the order of the custom fields, edit the
       "Sequence" value and click update. Custom fields with
       smaller values are displayed first.
     * To unlink a custom field, click on "Remove" link next to
       the field. Unlinking a custom field will not delete the
       values that are associated with the issues for this field.
       These values are only deleted if the custom field
       definition is removed (not unlinked!) from the database.
       This is useful if you decide to re-link the custom field.
       These values may also re-appear if issues are moved to
       another project which has this field linked.

   Moving Issues. When an issue is moved from one project to
   another, custom fields that are not defined for the new project
   are not deleted. These fields will re-appear with their correct
   values if the issue is moved back to the original project, or
   if these custom fields are linked to the new project.
     __________________________________________________________

7.1.5. Localizing Custom Field Names

   It is possible to localize the label for the custom fields.
   This can be as follows:

     * Give the custom field a valid variable name (i.e. start
       with an alpha character, no spaces, etc) - For example, we
       will use "my_start_date" for a custom field of type "Date"
       which stores the "Start Date" for working on an issue.
     * Add the localized string for "my_start_date" - This can be
       done by creating custom_strings_inc.php in the MantisBT
       root folder and adding the following code to it:
<?php
if ( lang_get_current() == 'german' ) {
    $s_my_start_date = 'Start Date XX';  // German translation of Start
Date
} else {
    # Default (use your preferred language as the default)
    $s_my_start_date = 'Start Date';
}
?>

   Note

        If we would have decided to use start_date as the name of the
        custom field, then we have used an already localized string
        from MantisBT standard strings. In this case, there is no need
        to create the custom_strings_inc.php or to add any strings to
        it. To check for standard strings, inspect
        lang/strings_english.txt.
     __________________________________________________________

7.1.6. Dynamic default values

7.1.6.1. Dynamic defaults for Date fields

   Custom fields of type date can be defaulted to a specific dates
   or to relative dates. Typically relative dates is the scenario
   that makes sense in most of the cases. The format for specific
   dates is an integer which indicates the number of seconds since
   the Unix Epoch (January 1 1970 00:00:00 GMT), which is the
   format consumed by the PHP date() method. The relative scenario
   expects default values like {tomorrow}, {yesterday}, {+2 days},
   {-3 days}, {next week}, etc. The curly brackets indicate that
   this is a logical value which is then evaluated using the PHP
   strtotime() function.
     __________________________________________________________

7.1.7. Dynamic values for Enumeration Custom Fields

   As discussed earlier, one of the possible types of a custom
   field is "enumeration". This type of custom field allows the
   user to select one value from a provided list of possible
   values. The standard way of defining such custom fields is to
   provide a '|' separated list of possible values. However, this
   approach has two limitations: the list is static, and the
   maximum length of the list must be no longer than 255
   characters. Hence, the need for the ability to construct the
   list of possible values dynamically.
     __________________________________________________________

7.1.7.1. Dynamic possible values included by default

   MantisBT ships with some dynamic possible values, these include
   the following:

     * =categories - a list of categories defined in the current
       project (or the project to which the issue belongs).
     * =versions - a list of all versions defined in the current
       project (or the project to which the issue belongs).
     * =future_versions - a list of all versions that belong to
       the current project with released flag set to false.
     * =released_versions - a list of all versions that belong to
       the current project with released flag set to true.

   Note

        The '=' before the name of the dynamic list of options is used
        to tell MantisBT that this is a dynamic list, rather than a
        static list with just one option.
     __________________________________________________________

7.1.7.2. Defining Custom Dynamic Possible Values

   If the user selects =versions, the actual custom function that
   is executed is custom_function_*_enum_versions(). The reason
   why the "enum_" is not included is to have a fixed prefix for
   all custom functions used for this purpose and protect against
   users using custom functions that were not intended for this
   purpose. For example, you don't want the user to use
   custom_function_*_issue_delete_notify() which may be overridden
   by the web master to delete associated data in other databases.

   Following is a sample custom function that is used to populate
   a field with the categories belonging to the currently selected
   project:
# --------------------
# Construct an enumeration for all categories for the current project.
# The enumeration will be empty if current project is ALL PROJECTS.
# Enumerations format is: "abc|lmn|xyz"
# To use this in a custom field type "=categories" in the possible value
s field.
function custom_function_override_enum_categories() {
    $t_categories = category_get_all_rows( helper_get_current_project()
);

    $t_enum = array();
    foreach( $t_categories as $t_category ) {
        $t_enum[] = $t_category['category'];
    }

    $t_possible_values = implode( '|', $t_enum );

    return $t_possible_values;
}

   Notice the following:

     * The custom function doesn't take any parameters.
     * The custom function returns the possible values in the
       format (A|B|C).
     * The custom function uses the current project.
     * The custom function builds on top of the already existing
       APIs.

   To define your own function \u201c=mine\u201d, you will have to
   define it with the following signature:
# --------------------
# To use this in a custom field type "=mine" in the possible values fiel
d.
function custom_function_override_enum_mine() {
    $t_enum = array();

    :

    $t_possible_values = implode( '|', $t_enum );

    return $t_possible_values;
}

   Notice "override" in the function name. This is because this
   method is defined by the MantisBT administrator/webmaster and
   not part of the MantisBT source. It is OK to override a method
   that doesn't exist.

   As usual, when MantisBT is upgraded to future releases, the
   custom functions will not be overwritten. The difference
   between the "default" implementation and the "override"
   implementation is explained in more details in the custom
   functions section.
     __________________________________________________________

7.2. Enumerations

   Enumerations are used in MantisBT to represent a set of
   possible values for an attribute. Enumerations are used for
   access levels, severities, priorities, project statuses,
   project view state, reproducibility, resolution, ETA, and
   projection. MantisBT provides the administrator with the
   flexibility of altering the values in these enumerations. The
   rest of this topic explains how enumerations work, and then how
   they can be customised.

   How enumerations work? core/constant_inc.php defines the
   constants that correspond to those in the enumeration. These
   are useful to refer to these enumerations in the configs and
   the code.
                    define( 'VIEWER', 10 )
                    define( 'REPORTER', 25 )
                    define( 'UPDATER',  40 )
                    define( 'DEVELOPER', 55 )
                    define( 'MANAGER', 70 )
                    define( 'ADMINISTRATOR', 90 )

   config_defaults_inc.php includes the defaults for the
   enumerations. The configuration options that are defaulted here
   are used in specifying which enumerations are active and should
   be used in MantisBT. However, the strings included in the
   enumerations here are just for documentation purpose, they are
   not shown to the user (due to the need for localisation).
   Hence, if an entry in this enumeration is not found in the
   corresponding localised enumeration (i.e. 70:manager), then it
   will be printed to the user as @70@.
                $g_access_levels_enum_string =
                '10:viewer,25:reporter,40:updater,55:developer,70:manage
r,90:administrator';

   lang/strings_german.txt provide the localised strings (in this
   case, in german) for enumerations. But again, the master list
   is the enumeration in the configs, the ones in the language
   files are just used for finding the localised equivalent for an
   entry. Hence, if a user changes the config to have only two
   types of users developers and administrators, then only those
   will be prompted to the users even if the enumerations in the
   language files still includes the full list.
                $s_access_levels_enum_string =
                '10:Betrachter,25:Reporter,40:Updater,55:Entwickler,70:M
anager,90:Administrator';

   How can they be customised? Let say we want to remove access
   level "Updater" and add access level "Senior Developer".

   The file custom_constants_inc.php is supported for the
   exclusive purpose of allowing administrators to define their
   own constants while maintaining a simple upgrade path for
   future releases of MantisBT. Note that this file is not
   distributed with MantisBT and you will need to create it if you
   need such customisation. In our example, we need to define a
   constant for the new access level.
                define ( 'SENIOR_DEVELOPER', 60 );

   In config_inc.php
                // Remove Updater and add Senior Developer
                $g_access_levels_enum_string =
                '10:viewer,25:reporter,55:developer,60:senior_developer,
70:manager,90:administrator';
                // Give access to Senior developers to create/delete cus
tom field.
                $g_manage_custom_fields_threshold = SENIOR_DEVELOPER;

   The file custom_strings_inc.php is introduced for a similar
   reason to that of custom_constants_inc.php, which is to define
   custom strings. The advantage of defining them here is to
   provide a simple upgrade path, and avoid having to re-do the
   changes when upgrading to the next MantisBT release. Note that
   you will need to create this file if you need such
   customisation. The file is automatically detected and included
   by MantisBT code.
                # Note that we don't have to remove the Updater entry fr
om the
                localisation file if ( lang_get_current() === 'english'
) {
                $s_access_levels_enum_string =
                '10:Betrachter,25:Reporter,40:Updater,55:Entwickler,60:S
enior
                Developer,70:Manager,90:Administrator'; }

   Conclusion. We have covered how enumerations work in general,
   and how to customise one of them. If you are interested in
   customising other enumerations, a good starting point would be
   to go to "MantisBT Enum Strings" section in
   config_defaults_inc.php. This section defines all enumerations
   that are used by MantisBT. For versions that are older than
   0.18.0, custom_*_inc.php files are not supported, and hence you
   will need to change in the actual constants / language files
   directly.
     __________________________________________________________

7.3. Email Notifications

   See Email in the Configuration section.

   Examples:

     * Notify only managers of new issues.
                            $g_notify_flags['new']['threshold_min'] = MA
NAGER;
                            $g_notify_flags['new']['threshold_max'] = MA
NAGER;

     * Notify Developers and managers of all project events,
       except, exclude developers from the 'closed' events.
$g_default_notify_flags['threshold_min'] = DEVELOPER;
                            $g_default_notify_flags['threshold_max'] = M
ANAGER;
                            $g_notify_flags['closed']['threshold_max'] =
 MANAGER;
                            $g_notify_flags['closed']['threshold_max'] =
 MANAGER;

     * Exclude those who contributed issue notes from getting
       messages about other changes in the issue.
$g_default_notify_flags['bugnotes'] = OFF;
     * Exclude those monitoring issues from seeing the 'closed'
       message
$g_notify_flags['closed']['monitor'] = OFF;
     * Only notify developers when issue notes are added.
$g_notify_flags['bugnote']['threshold_min'] = DEVELOPER;
                            $g_notify_flags['bugnote']['threshold_max']
= DEVELOPER;

     * Notify managers of changes in sponsorship.
$g_notify_flags['sponsor']['threshold_max'] = MANAGER;
                            $g_notify_flags['sponsor']['threshold_max']
= MANAGER;

     * Notify originator and managers of changes in ownership
       ("Assigned To:").
$g_notify_flags['owner']['threshold_max'] = MANAGER;
                            $g_notify_flags['owner']['threshold_max'] =
MANAGER;
                            $g_notify_flags['owner']['reporter'] = ON;

     * I'm paranoid about mail. Only send information on issues to
       those involved in them. Don't send mail people already know
       about. Also send new issue notifications to managers so
       they can screen them.
$g_mail_receive_own = OFF;
                            $g_default_notify_flags =
                            array('reporter' => ON, 'handler' => ON, 'mo
nitor' => ON,
                            'bugnotes' => ON, 'threshold_min' => NOBODY,
 'threshold_max'
                            => NOBODY);
                            $g_notify_flags['new']['threshold_min'] = MA
NAGER;
                            $g_notify_flags['new']['threshold_max'] = MA
NAGER;

     * How do I replace the $g_to_email configuration variable to
       log all messages to an email logger.
       You will need to create a dummy user with the appropriate
       access level for the notices you want to log. Once this
       user is added to projects, they will receive mail using the
       appropriate rules.
     __________________________________________________________

7.4. Customizing Status Values

   This section describes how to add a custom status.

    1. Define a constant to map the new status to.
       In the main mantisbt directory, locate and edit file
       custom_constants_inc.php; (create it if it does not exist)
<?php
        # Custom status code
        define( 'TESTING', 60 );
    2. Define the new status in the enumeration, as well as the
       corresponding color code.
       In the main mantisbt directory, edit your config_inc.php
# Revised enum string with new 'testing' status
$g_status_enum_string = '10:new,20:feedback,30:acknowledged,40:confirmed
,50:assigned,60:testing,80:resolved,90:closed';

# Status color additions
$g_status_colors['testing'] = '#ACE7AE';
       Note that the key in the $g_status_colors array must be
       equal to the value defined for the new status code in
       $g_status_enum_string.
    3. Define the required translation strings for the new status,
       for each language used in the installation.
          + s_status_enum_string: status codes translation (refer
            to the original language strings for standard values)
          + s_XXXX_bug_title: title displayed in the change status
            page
          + s_XXXX_bug_button: label for the submit button in the
            change status page
          + s_email_notification_title_for_status_bug_XXXX: title
            for notification e-mails
       where XXXX is the name of the new status as it was defined
       in g_status_enum_string above. If XXXX contains spaces,
       they should be replaced by underscores in the language
       strings names (e.g. for '35:pending user', use
       '$s_pending_user_bug_button')
       In the main mantisbt directory, locate and edit file
       custom_strings_inc.php; (create it if it does not exist)
<?php
# Translation for Custom Status Code: testing
switch( lang_get_current() ) {

        french:
                $s_status_enum_string = '10:nouveau,20:commentaire,30:ac
cepté,40:confirmé,50:affecté,60:à tester,80:résolu,90:fermé';

                $s_testing_bug_title = 'Mettre le bogue en test';
                $s_testing_bug_button = 'A tester';

                $s_email_notification_title_for_status_bug_testing = 'Le
 bogue suivant est prêt à être TESTE.';
                ;;

        default: # english
                $s_status_enum_string = '10:new,20:feedback,30:acknowled
ged,40:confirmed,50:assigned,60:testing,80:resolved,90:closed';

                $s_testing_bug_title = 'Mark issue Ready for Testing';
                $s_testing_bug_button = 'Ready for Testing';

                $s_email_notification_title_for_status_bug_testing = 'Th
e following issue is ready for TESTING.';
}
    4. Add the new status to the workflow as required.
       This can either be done from the Manage Workflow
       Transitions page or by manually editing config_inc.php as
       per the example below:
$g_status_enum_workflow[NEW_]         ='30:acknowledged,20:feedback,40:c
onfirmed,50:assigned,80:resolved';
$g_status_enum_workflow[FEEDBACK]     ='30:acknowledged,40:confirmed,50:
assigned,80:resolved';
$g_status_enum_workflow[ACKNOWLEDGED] ='40:confirmed,20:feedback,50:assi
gned,80:resolved';
$g_status_enum_workflow[CONFIRMED]    ='50:assigned,20:feedback,30:ackno
wledged,80:resolved';
$g_status_enum_workflow[ASSIGNED]     ='60:testing,20:feedback,30:acknow
ledged,40:confirmed,80:resolved';
$g_status_enum_workflow[TESTING]      ='80:resolved,20:feedback,50:assig
ned';
$g_status_enum_workflow[RESOLVED]     ='90:closed,20:feedback,50:assigne
d';
$g_status_enum_workflow[CLOSED]       ='20:feedback,50:assigned';
     __________________________________________________________

7.5. Custom Functions

   Custom functions are used to extend the functionality of
   MantisBT by integrating user-written functions into the issue
   processing at strategic places. This allows the system
   administrator to change the functionality without touching
   MantisBT's core.

   Default Custom Functions are defined in the API file
   core/custom_function_api.php , and are named
   custom_function_default_descriptive_name, where
   descriptive_name describes the particular function. See below
   for a description of the specific functions.

   User versions of these functions (overrides) are named like
   custom_function_override_descriptive_name, and placed in a file
   called custom_constants_inc.php that must be saved in
   MantisBT's root directory (This is the same place where the
   config_inc.php file resides). In normal processing, the system
   will look for override functions and execute them instead of
   the provided default functions.

   The simplest way to create a custom function is to copy the
   default one from the api to your override file
   (custom_constants_inc.php), and rename it (i.e. replacing
   'default' by 'override'). The specific functionality you need
   can then be coded into the override function.
     __________________________________________________________

7.5.1. Default Custom Functions

   Refer to core/custom_functions_api.php for further details.

   Custom Function Name Description Return value
   custom_function_default_auth_can_change_password() Determines
   whether MantisBT can update the password True if yes, False if
   not
   custom_function_default_changelog_include_issue( $p_issue_id )
   Determines whether the specified issue should be included in
   the Changelog or not. True to include, False to exclude
   custom_function_default_changelog_print_issue( $p_issue_id,
   $p_issue_level = 0 ) Prints one entry in the Changelog None
   custom_function_default_checkin( $p_issue_id, $p_comment,
   $p_file, $p_new_version, $p_fixed ) Register a checkin in
   source control by adding a history entry and a note None
   custom_function_default_enum_categories() Build a list of all
   categories for the current project Enumeration, delimited by
   "|"
   custom_function_default_enum_future_versions() Build a list of
   all future versions for the current project Enumeration,
   delimited by "|"
   custom_function_default_enum_released_versions() Build a list
   of all released versions for the current project Enumeration,
   delimited by "|"
   custom_function_default_enum_versions() Build a list of all
   versions for the current project Enumeration, delimited by "|"
   custom_function_default_format_issue_summary( $p_issue_id,
   $p_context = 0 ) Format the bug summary Formatted string
   custom_function_default_get_columns_to_view( $p_columns_target
   = COLUMNS_TARGET_VIEW_PAGE, $p_user_id = null ) Defines which
   columsn should be displayed Array of the column names
   custom_function_default_issue_create_notify( $p_issue_id )
   Notify after an issue has been created In case of invalid data,
   this function should call trigger_error()
   custom_function_default_issue_create_validate(
   $p_new_issue_data ) Validate field settings before creating an
   issue In case of invalid data, this function should call
   trigger_error()
   custom_function_default_issue_delete_notify( $p_issue_data )
   Notify after an issue has been deleted In case of invalid data,
   this function should call trigger_error()
   custom_function_default_issue_delete_validate( $p_issue_id )
   Validate field settings before deleting an issue In case of
   invalid data, this function should call trigger_error()
   custom_function_default_issue_update_notify( $p_issue_id )
   Notify after an issue has been updated In case of invalid data,
   this function should call trigger_error()
   custom_function_default_issue_update_validate( $p_issue_id,
   $p_new_issue_data, $p_bugnote_text ) Validate field issue data
   before updating In case of invalid data, this function should
   call trigger_error()
   custom_function_default_print_bug_view_page_custom_buttons(
   $p_bug_id ) Prints the custom buttons on the current view page
   None
   custom_function_default_print_column_title( $p_column,
   $p_columns_target = COLUMNS_TARGET_VIEW_PAGE ) Print a column's
   title based on its name None
   custom_function_default_print_column_value( $p_column, $p_bug,
   $p_columns_target = COLUMNS_TARGET_VIEW_PAGE ) Print a column's
   value based on its name None
   custom_function_default_roadmap_include_issue( $p_issue_id )
   Determines whether the specified issue should be included in
   the Roadmap or not. True to include, False to exclude
   custom_function_default_roadmap_print_issue( $p_issue_id,
   $p_issue_level = 0 ) Prints one entry in the Roadmap None
     __________________________________________________________

7.5.2. Example Custom Function Override

   The following function is used to validate an issue before it
   is resolved.
<?php

/**
 * Hook to validate Validate field settings before resolving
 * verify that the resolution is not set to OPEN
 * verify that the fixed in version is set (if versions of the product e
xist)
 */
function custom_function_override_issue_update_validate( $p_issue_id, $p
_bug_data, $p_bugnote_text ) {
        if( $p_bug_data->status == RESOLVED ) {
                if ( $p_bug_data->resolution == OPEN ) {
                        error_parameters( 'the resolution cannot be open
 to resolve the issue' );
                        trigger_error( ERROR_BUG_VALIDATE_FAILURE, ERROR
 );
                }
                $t_version_count = count( version_get_all_rows( $p_bug_d
ata-&gt;project_id ) );
                if( ( $t_version_count > 0 ) && ( $p_bug_data->fixed_in_
version == '' ) ) {
                        error_parameters( 'fixed in version must be set
to resolve the issue' );
                        trigger_error( ERROR_BUG_VALIDATE_FAILURE, ERROR
 );
                }
        }
}

?>

   The errors will also need to be defined, by modifying the
   following files

     * custom_constants_inc.php
define( 'ERROR_VALIDATE_FAILURE', 2000 );
     * custom_strings_inc.php
$MANTIS_ERROR['ERROR_VALIDATE_FAILURE'] = 'This change cannot be made be
cause %s';
     __________________________________________________________

Chapter 8. Troubleshooting

   This chapter provides the Administrator with additional
   information related to Application Errors and common problems
   in MantisBT.

   Useful additional reference information and support may also be
   found on the MantisBT website, more specifically the Forums and
   the Bugtracker.
     __________________________________________________________

8.1. Application Errors

   Additional information about MantisBT common errors.
     __________________________________________________________

8.1.1. Error 1502 - Category not found

   This error occurs whenever MantisBT tries to access an issue
   having a Category which has been deleted from the database.

   It will most likely happen when the Category specified by
   $g_default_category_for_moves has been deleted, and an issue is
   subsequently moved to another project where its current
   category does not exist.

   There are two ways to resolve this issue:

    1. Recreate the missing category
          + Find the missing Category's Id
            This can be done by checking the value of
            default_category_for_moves in config_inc.php and/or in
            Manage Configuration. Alternatively, the following SQL
            can be executed
SELECT DISTINCT category_id
FROM mantis_bug_table b
LEFT OUTER JOIN mantis_category_table c ON category_id = c.id
WHERE category_id <> 0
AND c.id IS NULL
          + Recreate the missing Category
            The category's id must be manually set to reflect the
            value retrieved above (e.g. using SQL or your favorite
            DB admin tool)
    2. Assign a new category to the issues referencing the missing
       one
          + Identify the corrupted issues and corresponding
            missing categories
SELECT b.id, category_id
FROM mantis_bug_table b
LEFT OUTER JOIN mantis_category_table c ON category_id = c.id
WHERE category_id <> 0
AND c.id IS NULL
          + Determine which Category id to use instead of the
            deleted one
          + Update the issues
            This can either be done manually using your favorite
            DB admin tool or with SQL, e.g.
UPDATE mantis_bug_table
SET category_id = (NewCategoryId)
WHERE category_id = (OldCategoryId)

   Finally, to avoid future occurences, you need to set
   $g_default_category_for_moves to a valid Category Id. This must
   be done as appropriate, either globally in config_inc.php, or
   via the Manage Configuration page, for all occurences of the
   parameter.

   Note: to retrieve a category's ID, you can either

     * Look up the value directly in the database:
       mantis_category_table, column 'id'
     * Go to Manage Projects, click the Edit button for the
       desired category and look for the the value next to 'id='
       in the page's URL
     __________________________________________________________

8.1.2. Error 2800 - Invalid form security token

   This error may only occur when Form Validation is enabled with
   $g_form_security_validation = ON. There are several known cases
   that could trigger it:

     * Multiple submissions of a form by clicking on the submit
       button several times (user error)
     * Invalid or unauthorized submission of a form, e.g. by
       hand-crafting the URL (CSRF attack)
     * Expired PHP session

   In the first two instances, MantisBT's behavior is by design,
   and the response as expected. For expired sessions however, the
   user is impacted by system behavior, which could not only cause
   confusion, but also potential loss of submitted form data. What
   happens is driven by several php.ini configuration settings:

     * The ratio session.gc_probability divided by
       session.gc_divisor, which determines the probability that
       the garbage collection process will start when a session is
       initialized.
     * session.gc_maxlifetime which specifies (as the name does
       not indicate) the minimum validity of session data.

   With PHP default values, sessions created more than 1440
   seconds (24 minutes) ago have a 1% chance to be invalidated
   each time a new session is initialized. This explains the
   seemingly random occurence of this error.

   Unfortunately, this problem cannot be fixed without a major
   rework of the way sessions and form security are handled in
   MantisBT.

   As a workaround, the Administrator can

     * Increase the value of session.gc_maxlifetime
     * Set $g_form_security_validation = OFF. Note that for
       security reasons, it is strongly recommended not to do
       this.

   Users may also install local tools to avoid loss of form data,
   e.g. Lazarus Form Recovery add-on for Firefox.

   Further references and reading:

     * MantisBT issues 12381, 12492, 13106, 13246
     __________________________________________________________

Chapter 9. Authentication

   MantisBT supports several authentication methods out of the
   box. In addition, there is work in progress relating to
   supporting authentication plug-ins. Once these are implemented,
   authentication against any protocol or repository of user names
   and passwords will be possible without having to touch MantisBT
   core code.

   It is important to note that MantisBT does not yet support
   hybrid authentication scenarios. For example, internal staff
   authenticating against LDAP while customers authenticate
   against the MantisBT database with MD5 hash.

   See $g_login_method in Global authentication parameters for
   more details about how to configure MantisBT to use one of
   these authentication techniques.
     __________________________________________________________

9.1. Standard Authentication

   With Standard login method, MantisBT users are authenticated
   against records in the MantisBT database, where the passwords
   are stored as a hash.

   Note: while technically unlimited, the password's length is
   arbitrarily restricted to 1024 characters
   (PASSWORD_MAX_SIZE_BEFORE_HASH constant).

   Values for $g_login_method:

     * MD5 is the default - and recommended - method
     * Support for additional methods (e.g. SHA-1) could be added
       in the future
     __________________________________________________________

9.2. LDAP and Microsoft Active Directory

   Value for $g_login_method: LDAP

   Authentication is made against an LDAP or Active Directory
   server.

   The LDAP parameters should be setup as explained in LDAP
   authentication parameters.

   An MD5 hash of the user's password will be stored in the
   database upon successful login, allowing fall-back to Standard
   Authentication when the LDAP server is not available.

   The user's ID and password is checked against the Directory; if
   the credentials are valid, then the user is allowed to login
   and their user account in MantisBT is created automatically.
     __________________________________________________________

9.3. Basic Authentication

   Value for $g_login_method: BASIC_AUTH

   When MantisBT is configured to use basic auth, it automatically
   detects the logged in user and checks if they are already
   registered in MantisBT, if not, then a new account is
   automatically created for the username.

   The password length is limited to the size of the underlying
   database field (DB_FIELD_SIZE_PASSWORD constant), currently 32
   characters.
     __________________________________________________________

9.4. HTTP Authentication

   Value for $g_login_method: HTTP_AUTH

   TODO

   The password length is limited to the size of the underlying
   database field (DB_FIELD_SIZE_PASSWORD constant), currently 32
   characters.
     __________________________________________________________

9.5. Deprecated authentication methods

   The following methods of authentication are deprecated, and
   supported for backwards-compatibility reasons only. It is
   strongly recommended to update MantisBT installations relying
   on these to use standard authentication instead.

   Deprecated values for $g_login_method:

     * CRYPT
     * CRYPT_FULL_SALT
     * PLAIN

   With CRYPT-based methods, the password's length is limited as
   per Standard Authentication. With PLAIN, its size is restricted
   as for Basic Authentication.
     __________________________________________________________

Chapter 10. Project Management

   This section covers the project management features of
   MantisBT. This includes features like change log, roadmap, time
   tracking, reporting and others.
     __________________________________________________________

10.1. Change Log

   MantisBT doesn't just track the status of issues, it also
   relates issues to versions. Each project can have several
   versions, which are marked with attributes like released and
   obsolete. Users typically report issues against released issues
   and developers typically fix issues in not released versions.
   With every new release comes question like: what's new? what
   has been fixed? Customers wonder if the new release is of
   interest to them and whether they should take an upgrade. Well,
   the change log is specifically tailored to answer these kind of
   questions.

   In order for an issue to show up in the change log, it has to
   satisfy certain criteria. The criteria is that the issue has to
   be resolved with a 'fixed' resolution and has to have the
   'fixed_in_version' field set. Users sometimes wonder why
   resolved or closed issues don't show up in the change log, and
   the answer is that the 'fixed_in_version' field is not set.
   Without the 'fixed_in_version', it is not possible for MantisBT
   to include the issues in the appropriate section of the
   changelog. Note that it is possible to set the
   'fixed_in_version' for multiple issues using the 'Update Fixed
   in Version' group action on the View Issues page (just below
   the issues list). This option is only available when the
   selected project is not 'All Projects'. Once a version is
   marked as obsolete, it is now longer included in the change
   log.

   MantisBT also provides the ability to customize the criteria
   used for an issue to be included in the change log. For
   example, for installations that use a custom set of
   resolutions, it is possible to select multiple resolutions as
   valid candidates for the change log. This can be done using
   custom functions (see custom functions documentation for more
   details). The custom function below overrides the MantisBT
   default behavior to include issues with both FIXED and
   IMPLEMENTED (a custom resolution) resolutions in the change
   log.
# --------------------
# Checks the provided bug and determines whether it should be included i
n the changelog
# or not.
# returns true: to include, false: to exclude.
function custom_function_override_changelog_include_issue( $p_issue_id )
 {
    $t_issue = bug_get( $p_issue_id );

    return ( ( $t_issue->resolution == FIXED || $t_issue->resolution ==
IMPLEMENTED ) &&
        ( $t_issue->status >= config_get( 'bug_resolved_status_threshold
' ) ) );
}

   MantisBT also provides the ability to customize the details to
   include from the issue and in what format. This can be done
   using the following custom function.
# --------------------
# Prints one entry in the changelog.
function custom_function_override_changelog_print_issue( $p_issue_id, $p
_issue_level = 0 ) {
    $t_bug = bug_get( $p_issue_id );

    if ( $t_bug->category_id ) {
        $t_category_name = category_get_name( $t_bug->category_id );
    } else {
        $t_category_name = '';
    }

    $t_category = is_blank( $t_category_name ) ? '' : '<b>[' . $t_catego
ry_name . ']</b> ';
    echo str_pad( '', $p_issue_level * 6, ' ' ), '- ', string_get_bug_vi
ew_link( $p_issue_id ), ': ', $t_category, string_display_line_links( $t
_bug->summary );

    if ( $t_bug->handler_id != 0 ) {
        echo ' (', prepare_user_name( $t_bug->handler_id ), ')';
    }

    echo ' - ', get_enum_element( 'status', $t_bug->status ), '.<br />';
}

   By combining both customization features, it is also possible
   to do more advanced customization scenarios. For example, users
   can add a 'ChangelogSummary' custom field and include all
   issues that have such field in the change log. Through
   customizing what information being included for a qualifying
   issue, users can also include the 'ChangelogSummary' text
   rather than the native summary field.

   In some cases, users know that they fixed an issue and that the
   fix will be included in the next release, however, they don't
   know yet the name of the release. In such case, the recommended
   approach is to always have a version defined that corresponds
   to the next release, which is typically called 'Next Release'.
   Once the release is cut and has a concrete name, then 'Next
   Release' can be renamed to the appropriate name and a new 'Next
   Release' can then be created. For teams that manage releases
   from multiple branches for the same project, then more than one
   next release can be possible. For example, 'Next Dev Release'
   and 'Next Stable Release'.

   Another common requirement is to be able to link to the change
   log of a specific project from the project's main website.
   There is a variety of ways to do that:

     * To link to the changelog of version "ver1" of project
       "myproject":
                                                http://www.example.com/m
antisbt/changelog_page.php?project=myproject&version=ver1

     * To link to the changelog of all non-obsolete versions of
       project 'myproject':
                                                http://www.example.com/m
antisbt/changelog_page.php?project=myproject

     * To link to the changelog of project with id 1. The project
       id can be figured out by going to the management page for
       the project and getting the value of project_id field form
       the URL.
                                                http://www.example.com/m
antisbt/changelog_page.php?project_id=1

     * To link to the changelog of version with id 1. The version
       id is unique across all projects and hence in this case it
       is not necessary to include the project id/name. The
       version id can be figured out by going to the manage
       project page and editing the required version. The
       version_id will be included in the URL.
                                                http://www.example.com/m
antisbt/changelog_page.php?version_id=1

   Another approach is to go to the project page and from there
   users can get to multiple other locations relating to the
   project include the change log. This can be done by a URL like
   the following:
http://www.example.com/mantisbt/project_page.php?project_id=1

   It is possible to customize the access level required for
   viewing the change log page. This can be done using the
   $g_view_changelog_threshold configuration option.
     __________________________________________________________

10.2. Roadmap

   One of the very important scenarios in project management is
   where the project managers (or team leads) triage the issues to
   set their priorities, target version, and possibly assign the
   issues to specific developers or take other actions on the
   issue. By setting the target version of an issue to a version
   that is not yet released, the issue shows up on the project
   roadmap, providing user with information about when to expect
   the issues to be resolved. The roadmap page has a section for
   each release showing information like planned issues, issues
   done and percentage of issues completed. Issues that are fixed
   in a specific version, but didn't have the target_version field
   set, will not show up in the roadmap. This allows the ability
   to control the issues that are significant enough to show in
   the roadmap, while all resolved fields can be found in the
   change log. Note that it is possible to set the
   'target_version' for multiple issues using the 'Update Target
   Version' group action that is available through the View Issues
   page (below the issues list). This option is only available
   when the current project is not 'All Projects'. Although it is
   not a typical scenario, it is worth mentioning that once a
   version is marked as obsolete, it is not included in the
   roadmap.

   Note that the roadmap only includes future versions, once a
   version is marked as released, it no longer is included in the
   roadmap. For information about such releases, the change log
   feature should be used. For an issue to be shown on the
   roadmap, it has to have the target version set. It does not
   matter whether the feature is resolved or not. Resolved
   features will be decorated with a strikethrough and will be
   counted as done.

   MantisBT provides the ability to customize the criteria for
   issues to show up on the roadmap. The default criteria is that
   the issue has to belong to a version that is not yet released
   and that the issues is not a duplicate. However, such criteria
   can be customized by using custom functions as below.
# --------------------
# Checks the provided bug and determines whether it should be included i
n the roadmap or not.
# returns true: to include, false: to exclude.
function custom_function_override_roadmap_include_issue( $p_issue_id ) {
    return ( true );
}

   It is also possible to customize the details included about an
   issues and the presentation of such details. This can be done
   through the following custom function:
# --------------------
# Prints one entry in the roadmap.
function custom_function_override_roadmap_print_issue( $p_issue_id, $p_i
ssue_level = 0 ) {
    $t_bug = bug_get( $p_issue_id );

    if ( bug_is_resolved( $p_issue_id ) ) {
        $t_strike_start = '<strike>';
        $t_strike_end = '</strike>';
    } else {
        $t_strike_start = $t_strike_end = '';
    }

    if ( $t_bug->category_id ) {
        $t_category_name = category_get_name( $t_bug->category_id );
    } else {
        $t_category_name = '';
    }

    $t_category = is_blank( $t_category_name ) ? '' : '<b>[' . $t_catego
ry_name . ']</b> ';

    echo str_pad( '', $p_issue_level * 6, ' ' ), '- ', $t_strike_start,
string_get_bug_view_link( $p_issue_id ), ': ', $t_category, string_displ
ay_line_links( $t_bug->summary );

    if ( $t_bug->handler_id != 0 ) {
        echo ' (', prepare_user_name( $t_bug->handler_id ), ')';
    }

    echo ' - ', get_enum_element( 'status', $t_bug->status ), $t_strike_
end, '.<br />';
}

   Some teams manage different branches for each of their projects
   (e.g. development and maintenance branches). As part of
   triaging the issue, they may decide that an issue should be
   targeted to multiple branches. Hence, frequently the request
   comes up to be able to target a single issue to multiple
   releases. The current MantisBT approach is that an issues
   represents an implementation or a fix for an issue on a
   specific branch. Since sometimes applying and verifying a fix
   to the two branches does not happen at the same time and in
   some cases the approach for fixing an issue is different based
   on the branch. Hence, the way to manage such scenario is to
   have the main issue for the initial fix and have related issues
   which capture the work relating to applying the fix to other
   branches. The issues for porting the fix can contain any
   discussions relating to progress, reflect the appropriate
   status and can go through the standard workflow process
   independent of the original issues.

   Another common requirement is to be able to link to the roadmap
   of a specific project from the project's main website. There is
   a variety of ways to do that:

     * To link to the roadmap of version "ver1" of project
       "myproject":
                                                http://www.example.com/m
antisbt/roadmap_page.php?project=myproject&version=ver1

     * To link to the roadmap of all non-obsolete versions of
       project 'myproject':
                                                http://www.example.com/m
antisbt/roadmap_page.php?project=myproject

     * To link to the roadmap of project with id 1. The project id
       can be figured out by going to the management page for the
       project and getting the value of project_id field form the
       URL.
                                                http://www.example.com/m
antisbt/roadmap_page.php?project_id=1

     * To link to the roadmap of version with id 1. The version id
       is unique across all projects and hence in this case it is
       not necessary to include the project id/name. The version
       id can be figured out by going to the manage project page
       and editing the required version. The version_id will be
       included in the URL.
                                                http://www.example.com/m
antisbt/roadmap_page.php?version_id=1

   Another approach is to go to the project page and from there
   users can get to multiple other locations relating to the
   project include the roadmap. This can be done by a URL like the
   following:
http://www.example.com/mantisbt/project_page.php?project_id=1

   The access level required to view and modify the roadmap can be
   configured through $g_roadmap_view_threshold and
   $g_roadmap_update_threshold respectively. Modifying the roadmap
   is the ability to set the target versions for issues. Users who
   have such access can set the target versions while reporting
   new issues or by updating existing issues.
     __________________________________________________________

10.3. Time Tracking

   This is currently a work in progress. To follow the work have a
   look on the wiki page Time Tracking (Issue 4428)

   To activate the Time Tracking feature you have to set the
   configuration option "time_tracking_enabled" to ON. To
   activating the Time Tracking you can :

     * Static solution : change the variable
       '$g_time_tracking_enabled' in the configuration file
       'config_defaults_inc.php', this will change the
       configuration for all the MantisBT instance ;
     * Dynamic and "project by project" solution : Use the
       administration page "Manage Configuration" and set the
       variable 'time_tracking_enabled' to '1' for which user and
       which project of you choice.

   All Time Tracking configuration options are described in the
   configuration section off this guide.
     __________________________________________________________

10.4. Graphs

   Assigned to me: TODO

   Release Delta: TODO

   Category: TODO

   Severity: TODO

   Severity / Status: TODO

   Daily Delta: TODO

   Reported by Me: TODO
     __________________________________________________________

10.5. Summary Page

   By Status: TODO

   By Severity: TODO

   By Category: TODO

   Time Stats for Resolved Issues (days): TODO

   Developer Status: TODO

   Reporter by Resolution: TODO

   Developer by Resolution: TODO

   By Date: TODO

   Most Active: TODO

   Longest Open: TODO

   By Resolution: TODO

   By Priority: TODO

   Reporter Status: TODO

   Reporter Effectiveness: TODO
     __________________________________________________________

Chapter 11. Contributing to MantisBT

11.1. Talent and Time

   One of the greatest ways to contribute to MantisBT is to
   contribute your talent and time. For MantisBT to keep growing
   we need such support in all areas related to the software
   development cycle. This includes: business analysts,
   developers, web designers, graphics designers, technical
   writers, globalization developers, translators, testers, super
   users, packagers and active users. If you would like to
   contribute in any of these capacities please contact us through
   the "Contact Us" page.
     __________________________________________________________

11.2. Recommend MantisBT to Others

   It feels great when we get feedback from the user community
   about how MantisBT boosted their productivity, and benefited
   their organization. A lot of the feedback I get is via email,
   some on mailing lists, and some on forums. I would encourage
   such users to blog about it, tell their friends about MantisBT,
   and recommend MantisBT to other organizations. MantisBT is
   driven by it's community, the greater the community, the
   greater the ideas, the greater of a product it becomes.
     __________________________________________________________

11.3. Blog about MantisBT

   If you have a blog, then blog about MantisBT, review it's
   features and help us spread the word. A lot of users also like
   to blog about how they customized MantisBT to fit their needs
   or to integrate with other tools that they use in their work
   environment.
     __________________________________________________________

11.4. Integrate with MantisBT

   If you have a product that can be integrates with MantisBT to
   provide a value for MantisBT users, that would be a great place
   to contribute and benefit both your project's community and the
   MantisBT community. A great examples in this area are
   integrations with content management systems (e.g. *Nuke,
   Xoops), project management (PHPProjekt), and TestLink for Test
   Management. MantisBT can easily be integrated with projects in
   any programming language whether it is hosted on the same
   webserver or anywhere else in the world. This can be achieved
   through it's SOAP API and MantisConnect client libraries.
   MantisConnect comes with client libraries and samples in
   languages like PHP, .NET, Java and Cocoa.
     __________________________________________________________

11.5. Registered in MantisBT Users Directory

   Join the Users Directory by clicking Submit. While entering
   your company or project details you will be able to write up a
   testimonial about MantisBT which will then be included in the
   Testimonials page.
     __________________________________________________________

11.6. Donate Money

   Use the PayPal donate buttons that you will see around the
   website (e.g. bottom left of the home page). You can donate
   using your credit card even if you don't have a PayPal account.
   Donations is a very easy way for the MantisBT community to give
   back to MantisBT. The donations can be as small as US$1 or as
   big as you or your organization want it to be.
     __________________________________________________________

11.7. Sponsor MantisBT

   MantisBT Sponsors are organizations that have realized the
   benefit brought to their business by using MantisBT and would
   like to protect such investment and always push it forward via
   sponsorship. Please take a moment to visit our sponsors page
   and use the "Contact Us" page for further information.
     __________________________________________________________

Acknowledgements

   Acknowledgements

   We would like to thank all the past and present contributors to
   the project:

     * name
     * name
     * name
     * name
