User's Guide
Reference Manual
Release Notes
PDF
Top

Dialyzer
Release Notes
Version 2.6

Expand All
Contract All

Chapters

# 1 Dialyzer Release Notes

This document describes the changes made to the Dialyzer application.

### 1.1 Dialyzer 2.6

#### Improvements and New Features

- Miscellaneous updates due to Unicode support.

  Own Id: OTP-10820

- User defined types with same name and different arity and documentation inconsistencies. Thanks Stavros Aronis.

  Own Id: OTP-10861

- Native code compilation changes. Thanks to Kostis Sagonas.

  Own Id: OTP-10865

### 1.2 Dialyzer 2.5.4

#### Improvements and New Features

- Support for Unicode has been implemented.

  Own Id: OTP-10302

- Dialyzer no longer outputs warnings for unused anonymous functions ("funs"). Warnings are still output for unused functions.

  Own Id: OTP-10433

- Where necessary a comment stating encoding has been added to Erlang files. The comment is meant to be removed in Erlang/OTP R17B when UTF-8 becomes the default encoding.

  Own Id: OTP-10630

- Some examples overflowing the width of PDF pages have been corrected.

  Own Id: OTP-10665

- Fix precision of record creation violation warnings. Thanks to Stavros Aronis

  Own Id: OTP-10681

- Report spec discrepancy on mismatching lists. Thanks to Stavros Aronis.

  Own Id: OTP-10740

- Properly support functions with arbitrary arity in type specs. Thanks to Stavros Aronis.

  Own Id: OTP-10772

### 1.3 Dialyzer 2.5.3

#### Fixed Bugs and Malfunctions

- Fix a crash in race condition detection

  Remove old untested experimental extension

  Respect {plt_check,false} option when using dialyzer:run/1

  Fix handling of tuple set remote types appearing in tuple sets

  Own Id: OTP-10464

### 1.4 Dialyzer 2.5.2

#### Fixed Bugs and Malfunctions

- Correct handling of type names in contracts. Fix crash related to contract checking. Do not rewrite unchanged PLT.

  Own Id: OTP-10083

- Stop a forgotten server process

  Dialyzer forgot to stop a server process before finishing its analysis. This is a concurrency error detected by Concuerror. Changes to fix warnings identified by running dialyzer -Wunmatched_returns. Thanks to Kostis Sagonas.

  Own Id: OTP-10231

#### Improvements and New Features

- Bug fixes and improvements of dialyzer_typesig.

  Own Id: OTP-10082

- Add parallel dialyzer support

  Own Id: OTP-10103

- An alternative implementation of the solver in dialyzer_typesig has been introduced. It is faster than the original implementation.

  Own Id: OTP-10110

- Bugs in erl_types:t_inf() (HiPE) and in dialyzer_dataflow (Dialyzer) have been fixed.

  Own Id: OTP-10191

### 1.5 Dialyzer 2.5.1

#### Improvements and New Features

- Handle nowarn_unused_function the same way as the compiler does.

  Own Id: OTP-9833

### 1.6 Dialyzer 2.5

#### Fixed Bugs and Malfunctions

- Fix false warning about closure application

  Whenever a variable that could hold one of two or more possible closures was used in a particular application, the application was assumed to fail if ONE of the closures would fail in this application. This has been corrected to infer failing application if ALL possible closures would fail in the particular application.

  Change category of 'might also return' warnings

  Dialyzer emits warnings like the following "The specification for _ states that the function might also return _ but the inferred return is _", which are actually underspecifications and not wrong type specifications. This patch makes sure that they are filed under the appropriate category.

  Own Id: OTP-9707

- Wrap up behaviours patch for Dialyzer

  - Enable warnings by default, add two options for suppressing them

  - Fix warning formatting and update testsuites.

  - Detection of callback-spec discrepancies

  - Allow none() as return value in callbacks

  - Behaviour callback discrepancy detection for Dialyzer

  - Add lookup function for callbacks

  - Store callbacks in codeserver and PLT

  - Collect callback definitions during compilation

  - Update inets results

  Own Id: OTP-9731

- - No warnings for underspecs with remote types

  - Fix crash in Typer

  - Fix Dialyzer's warning for its own code

  - Fix Dialyzer's warnings in HiPE

  - Add file/line info in a particular Dialyzer crash

  - Update inets test results

  Own Id: OTP-9758

- - Correct callback spec in application module

  - Refine warning about callback specs with extra ranges

  - Cleanup autoimport compiler directives

  - Fix Dialyzer's warnings in typer

  - Fix Dialyzer's warning for its own code

  - Fix bug in Dialyzer's behaviours analysis

  - Fix crash in Dialyzer

  - Variable substitution was not generalizing any unknown variables.

  Own Id: OTP-9776

#### Improvements and New Features

- Optimize the joining of maps in dialyzer_dataflow.

  Own Id: OTP-9761

### 1.7 Dialyzer 2.4.4

#### Fixed Bugs and Malfunctions

- Update results of race_SUITE/extract_translations Update results of small_SUITE/flatten Add codec_can and list_to_bitstring tests Fix bug when reporting unused functions Update Dialyzer r9c_suite results Fix dialyzer warning on default clause for binary comprehension (Thanks to Ivan Dubrov)

  Own Id: OTP-9483

- Fix server loop detection

  Dialyzer does not normally emit warnings for functions that implement non-terminating server loops. This detection failed when some of the elements in an SCC terminated normally (being for example list comprehensions or other generic anonymous functions that were included in the SCC). This patch fixes that.

  Own Id: OTP-9489

- Add a proplist() type

  Recently I was adding specs to an API and found that there is no canonical proplist() type defined. (Thanks to Ryan Zezeski)

  Own Id: OTP-9499

- Suppress some warnings about generation of non-returning funs

  No warnings are emitted for funs that are non-returning when the function that generates them has a contract that specifies that it will return such a non-returning fun.

  Enhance Dialyzer's inference on comparisons

  This patch makes Dialyzer aware of Erlang's total ordering of terms, enabling discrepancy detection in cases where e.g. integer() < tuple() is treated as a comparison that might also return false (when it is certain to always return true).

  Minor fix in dead code

  Fix infinite loop in dataflow

  Update r9c/{inets,mnesia} results in dialyzer's test suite

  Add origin information to #fun_var closures

  (Thanks to Tuncer Ayaz and Maria Christakis)

  Own Id: OTP-9529

- Quote atoms if necessary in types

  Atoms in some occurrences were not correctly quoted when formatted to strings, for instance by the typer program (Thanks to Tomas Abrahamsson)

  Update Dialyzer's reference results

  Own Id: OTP-9560

- Fix typer's crash for nonexisting files Remove unused macro Fix bug in dataflow Decrease tuple arity limit This fixes a memory related crash.

  Own Id: OTP-9597

#### Improvements and New Features

- Types for several BIFs have been extended/corrected. Also the types for types for lists:keyfind/3, lists:keysearch/3, and lists:keyemember/3 have been corrected. The incorrect/incomplete types could cause false dialyzer warnings.

  Own Id: OTP-9496

### 1.8 Dialyzer 2.4.3

#### Fixed Bugs and Malfunctions

- Fix the name of an error function(Thanks to Maria christakis)

  Own Id: OTP-9175

- Fix crash related with the contract blame assignment patch

  Own Id: OTP-9219

- dialyzer/doc: synchronize manual.txt and dialyzer.xml (Thanks to Tuncer Ayaz)

  Own Id: OTP-9226

- Simplify Dialyzer's test suite structure

  *_SUITE.erl files are now automatically generated by the respective data directories by the Makefile.

  Own Id: OTP-9278

### 1.9 Dialyzer 2.4.2

#### Fixed Bugs and Malfunctions

- Add a --fullpath option to Dialyzer

  This change adds a --fullpath option to Dialyzer, which makes the warning messages contain the full path of the corresponding file.

  Original patch submitted by Magnus Henoch (legoscia) on 15/9/2010 and cooked to death in the 'pu' branch all this time.

  The patch was essentially correct and most of it has been used as is, but there have been some changes to make the code slightly prettier, avoid some code duplication, and add documentation to dialyzer's doc files and to its help message.

  Own Id: OTP-9098

- Fix warnings about guards containing not

  The wording of warnings about unsatisfiable guards that used 'not' was incorrect (the 'not' was not mentioned and it appeared as "Guard test is_atom(atom()) can never succeed") (thanks to Stavros Aronis).

  Own Id: OTP-9099

- Version 2.4.2 (in Erlang/OTP R14B02) ------------------------------------ - Added --fullpath option to display files with warnings with their full file names (thanks to Magnus Henoch for the original patch). - Better handling of 'and'/'or'/'not' guards that generate warnings (thanks to Stavros Aronis). - Better blame assignment for cases when a function's spec is erroneous (thanks to Stavros Aronis). - More descriptive warnings when a tuple/record pattern contains subterms that violate the declared types of record fields (thanks to Matthias Lang for the test case and for Stavros Aronis for the actual fix).

  Own Id: OTP-9126

- Add spec to dialyzer_cl_parse:get_lib_dir/1

  Own Id: OTP-9129

#### Improvements and New Features

- Test suites for Dialyzer

  This is a transcription of most of the cvs.srv.it.uu.se:/hipe repository dialyzer_tests into test suites that use the test server framework.

  See README for information on how to use the included scripts for modifications and updates.

  When testing Dialyzer it's important that several OTP modules are included in the plt. The suites takes care of that too.

  Own Id: OTP-9116

### 1.10 Dialyzer 2.4.0

#### Fixed Bugs and Malfunctions

- - Fixed pretty rare infinite loop when refining the types of an SCC whose functions all returned none() (thanks to Stavros Aronis).

  - Fixed pretty rare crash when taking the infimum of two tuple_sets.

  Own Id: OTP-8979

#### Improvements and New Features

- - Added ability to supply multiple PLTs for the analysis (option --plts). Currently these PLTs must be independent (i.e., no module appears in more than one PLT) and there must not include files with module name clashes.

  - Strengthened and streamlined hard-coded type information for some BIFs and key library functions.

  Own Id: OTP-8962

### 1.11 Dialyzer 2.3.1

#### Improvements and New Features

- Eliminated warnings for auto-imported BIF clashes.

  Own Id: OTP-8840

### 1.12 Dialyzer 2.3.0

#### Improvements and New Features

- Various changes to dialyzer-related files for R14.

  - Dialyzer properly supports the new attribute -export_type and checks that remote types only refer to exported types. A warning is produced if some files/applications refer to types defined in modules which are neither in the PLT nor in the analyzed applications.

  - Support for detecting data races involving whereis/1 and unregister/1.

  - More precise identification of the reason(s) why a record construction violates the types declared for its fields.

  - Fixed bug in the handling of the 'or' guard.

  - Better handling of the erlang:element/2 BIF.

  - Complete handling of Erlang BIFs.

  Own Id: OTP-8699

### 1.13 Dialyzer 2.2.0

#### Improvements and New Features

- Much better support for opaque types (thanks to Manouk Manoukian).

  Added support for recursive types (experimental).

  Added support for parameterized modules.

  Dialyzer now warns when -specs state that a function returns some type when in fact it does not.

  Added --no_native (-nn) option so that the user can bypass the native code compilation that dialyzer heuristically performs when dialyzing many files.

  Fixed minor bug in the dialyzer script allowing the --wx option to bring up the wx-based GUI regardless of its placement in the options list.

  Options --apps and -Wrace_conditions, which were added in the previous version, are now properly documented in the manual.

  Own Id: OTP-8464

### 1.14 Dialyzer 2.1.0

#### Improvements and New Features

- The documentation is now built with open source tools (xsltproc and fop) that exists on most platforms. One visible change is that the frames are removed.

  Own Id: OTP-8201

- Dialyzer can statically detect some kinds of data races in Erlang programs. Use the new option -Wrace_conditions to enable the race analysis. The technique is described in a paper which is available at: http://www.it.uu.se/research/group/hipe/dialyzer/publications/races.pdf

  Added support for packages (thanks to Maria Christakis).

  There has been a major change in the default mode of Dialyzer. Previously, the default mode was the GUI, while now it is the command line. As a result of this change, it is now possible to analyze a set of files/dirs with the command:

  - dialyzer file1 ... fileN

  In other words, the -c (--command-line) option is no longer necessary, though it will be retained for some time for backwards compatibility. To start dialyzer's GUI use either of the following commands:

  - dialyzer --gui %% for the old gs-based GUI
  - dialyzer --wx %% for the new wx-based GUI (where available)

  There is a new option --apps which allows the user to easily refer to Erlang/OTP applications and include them in the analysis or in the building of the PLT. For example, we recommend building the PLT with:

  - dialyzer --build_plt --apps erts kernel stdlib mnesia ...

  The new option can also take absolute file names as well as applications. Note that the application versions that will be included in the PLT are those that correspond to the Erlang/OTP system which is used.

  Dialyzer has a new wxWidgets based GUI (thanks to Elli Frangaki) for platforms where the wx application is available.

  Own Id: OTP-8300

### 1.15 Dialyzer 2.0.0

#### Improvements and New Features

- There is a major addition to the capabilities of dialyzer, worthy of bumping the version number. Starting with this version, dialyzer not only accepts but also properly processes remote types (i.e., types of the form ModuleName:TypeName()). Previous dialyzer versions only accepted this notation in -type and -spec declarations, but effectively ignored its information by mapping remote types to the type any(). In contrast, starting with this version, remote types are used in the analysis and are also stored in the PLTs. (This addition changes the format of PLTs and requires rebuilding any PLTs created by an older dialyzer version.) Note that dialyzer will complain and abort the analysis of a set of modules if it needs to process a remote type without a definition (either because the module does not include a definition of the type or the module is not included in the analysis). We may relax this restriction in a future version.

  Fixed minor issue with dialyzer:run/1 crashing (upon its return) when used for adding type information to an existing PLT.

  Fixed minor but quite annoying issues in dialyzer's GUI.

  Own Id: OTP-8187

### 1.16 Dialyzer 1.9.2

#### Improvements and New Features

- Fixed problem with type inference going into an infinite loop when analyzing a strongly connected component of functions that do not return but also contain an erroneous call which makes them fail and be assigned the type none() instead of the type unit().

  More accurate type information for some BIFs and library files.

  Introduced boolean() as the `official' name for the type was so far known as bool(). The latter is still accepted as well as boolean().

  Own Id: OTP-8037

### 1.17 Dialyzer 1.9.1

#### Improvements and New Features

- Has better handling of opaque types.

  The handling of UTF segments of bitstreams has been significantly strengthened and revised. In all probability, now it is correct.

  Own Id: OTP-7958

### 1.18 Dialyzer 1.9.0

#### Improvements and New Features

- The analysis accepts opaque type declarations and detects violations of opaqueness of terms of such types. Starting with R13, many Erlang/OTP standard libraries (array, dict, digraph, ets, gb_sets, gb_trees, queue, and sets) contain opaque type declarations of their main data types. Dialyzer will spit out warnings in code that explicitly depends on the structure of these terms.

  Added support for handling UTF segments in bitstreams and for detecting obvious type errors in these segments. Warning: This code is not terribly tested though since there are very few Erlang programs which use Unicode-based binaries - not surprising since this is a new language feature of R13.

  Strengthened the discrepancy identification when testing for equality and matching between terms of different types. This detects more bugs in code.

  Added warning for M:F(...) calls where M is not a module term and F is not an atom. Previously, such calls where found to fail but the reason for the failure was not reported.

  Added a convenient shorthand for the --no_check_plt option (-n).

  Added the --dump_callgraph option for dumping the callgraph of all files that are analyzed into a specified file. The callgraph either be dumped in raw format, in .dot format, or converted to a .ps (postscript) file. Note that in large callgraphs the generated postscript file might not be interpretable by Ghostview. (Thanks to Ilya Khlopotov for the initial version of this functionality.)

  Own Id: OTP-7864

### 1.19 Dialyzer 1.8.3

#### Improvements and New Features

- Added the --no_check_plt option that makes the startup time faster when working with stable PLTs that do not change.

  Changed the phrasing of some warnings so that they do not cause confusion to some users and correspond better to reality.

  Own Id: OTP-7632

### 1.20 Dialyzer 1.8.2

#### Improvements and New Features

- Minor updates.

  Own Id: OTP-7522

### 1.21 Dialyzer 1.8.1

#### Improvements and New Features

- There is new --raw option for Dialyzer to output the result of the analysis in Erlang term, to facilitate later filtering and/or formatting.

  Own Id: OTP-7386

- The return type of the Erlang interface dialyzer:run/1 has changed to only return a list of warnings. If something goes wrong dialyzer dies with an exception.

  The handling of the PLT is now more flexible. There is no longer any default PLT included with OTP. Please consult the manual for the changes.

  Own Id: OTP-7389

### 1.22 Dialyzer 1.8.0

#### Improvements and New Features

- Dialyzer's analysis is from now on exclusively based on success typings. In particular, support for options --old_style and --dataflow has been discontinued.

  Better and more aggressive handling of type information in records.

  Dialyzer has a new warning option -Wunmatched_returns which warns for function calls that ignore the return value. This catches many common programming errors (e.g. calling file:close/1 and not checking for the absence of errors), interface discrepancies (e.g. a function returning multiple values when in reality the function is void and only called for its side-effects), calling the wrong function (e.g. io_lib:format/1 instead of io:format/1), and even possible performance defects (e.g. unnecessarily constructing a list using a list comprehension instead of using lists:foreach/2). Whenever a function returns a single atomic value (e.g. 'ok' or pid()), the warning is suppressed. This allows for "void" functions (returning a single atom like 'ok') or for calls to certain builtins like spawn. Because not all calls which ignore the return value are discrepancies, the option is off by default and has to be explicitly requested by the user. But we recommend it nevertheless.

  Some warning options (-Wno_comp, -Wno_guards, -Wno_unsafe_beam, etc.) which could be used when analyzing bytecode produced by an old BEAM compiler have been removed.

  Own Id: OTP-7241

### 1.23 Dialyzer 1.7.2

#### Improvements and New Features

- The warnings returned by the Erlang interface now contains a tag describing the type of warning.

  *** POTENTIAL INCOMPATIBILITY ***

  Own Id: OTP-7134

### 1.24 Dialyzer 1.7.1

#### Improvements and New Features

- Use of success typings is now default, is robust and detects significantly more errors than in previous versions.

  Dialyzer now accepts and takes into account type information in record declarations and in contracts -- see related paper in Erlang'07 workshop. Various OTP applications (e.g. stdlib and kernel) are partially annotated with appropriate contracts specifying types information for their functions.

  The type previously known as unit() has been renamed to no_return(). Its use in a contract as the return type of a function now silences off the "function has no local return" dialyzer warning without use of the corresponding option.

  Own Id: OTP-6997

### 1.25 Dialyzer 1.7.0

#### Improvements and New Features

- Minor Makefile changes.

  Own Id: OTP-6689

- Dialyzer can now use success typings to find discrepancies. As a consequence significantly more discrepancies are detected. The downside is that the analysis takes about 2 to 2.5 times longer than in previous versions, and may also result in some warnings that might be harder to interpret even though they are correct. This has been a major change, worth of increasing the version number.

  New command-line options:

  --succ_typings Use the success typings analysis.

  --dataflow (default) Use the previous analysis.

  The new type unit() has been introduced to handle the return type of non-terminating functions such as servers.

  Dialyzer's code server uses a compressed representation and the analysis requires significantly less memory than in previous versions.

  Own Id: OTP-6736

### 1.26 Dialyzer 1.6.0

#### Improvements and New Features

- Dialyzer (in the modes where either source or BEAM code which contains debug_info is analyzed) spits out line information for all discrepancies. This has been a major change, worth of increasing the version number.

  We warn users that *considerably* more discrepancies are identified by this version of Dialyzer compared with previous ones and applications. If, for some reason, warnings generated by previous versions of Dialyzer are preferable, the command line option --old_style can be employed.

  Own Id: OTP-6546

- Dialyzer handles term comparison operators more precisely and is able to identify more discrepancies in 'if' or 'case' statements with comparisons.

  Dialyzer has more precise type information for many standard OTP functions.

  Own Id: OTP-6547

### 1.27 Dialyzer 1.5.1

#### Improvements and New Features

- Updated the chapter "More on the Persistent Lookup Table (PLT)" in Dialyzer User's Guide and added information on how to use Dialyzer from Erlang to dialyzer(3). Also, the Dialyzer text files used by its GUI are now included in the Erlang/OTP release.

  Own Id: OTP-6361

- New options --check_init_plt and --verbose.

  Improvements in the analysis (meaning that this version can find more discrepancies than the previous version).

  Own Id: OTP-6421

### 1.28 Dialyzer 1.5.0

#### Improvements and New Features

- Dialyzer's building of PLT is based on a different type inference algorithm. More specifically, Dialyzer uses inference of refined success typings to infer function prototypes. As a result, Dialyzer bases its analysis on a significantly more powerful basis and thus is able to detect more discrepancies. The downside is that building the PLT is a considerably slower process. We will work on improving that.

  Dialyzer takes into account the BEAM compiler directive -compile({nowarn_unused_function, {F,A}}). and then suppresses the warning that function F/A will never be called.

  Dialyzer's default initial PLT now also includes "mnesia".

  Own Id: OTP-6304

### 1.29 Dialyzer 1.4.2

#### Improvements and New Features

- Improvements in PLT management.

  Own Id: OTP-6128

### 1.30 Dialyzer 1.4.1

#### Fixed Bugs and Malfunctions

- Some minor changes.

#### Improvements and New Features

- Some minor changes.

### 1.31 Dialyzer 1.4.0

#### Fixed Bugs and Malfunctions

- Changes for Dialyzer to work with Erlang/OTP R10B-10.

#### Improvements and New Features

- Dialyzer's analysis is significantly faster as it uses a global function call-graph for obtaining type signatures for all analyzed functions.

### 1.32 Dialyzer 1.3.1

#### Fixed Bugs and Malfunctions

- Small changes for Dialyzer to work with Erlang/OTP R10B-5.

- Fixed a small buglet in the analysis; this affected one of HiPE's files.

#### Improvements and New Features

- Modified setup script for execution under Cygwin (patch by Vlad Dumitrescu).

- Added command line option --no_warn_on_inline.

- Dialyzer now explicitly warns when modules with the same name but from different dirs are being analyzed (contribution by Ulf Wiger).

### 1.33 Dialyzer 1.3.0

#### Fixed Bugs and Malfunctions

- Fixed a number of false positives that Dialyzer 1.2.0 was spitting out.

#### Improvements and New Features

- Requires the presence of an Erlang/OTP R10B-4 system.

- Dialyzer is significantly (approx 40%) faster since it now uses 'ets' rather than 'dets' for its PLT.

- Slightly improved the precision of the analysis.

- In the GUI version, Dialyzer now reports the list of modules that should be included in the modules to analyze in order to possibly improve the accuracy of the reported results.

- Some more information is displayed when calling a function or closure with arguments of the wrong type.

- The record guard now allows discrepancies involving tuples that are known to be records to be displayed as #rec{} rather than {'rec',_,...,_}

- Added -q option which makes the command-line version of Dialyzer a bit more silent.

### 1.34 Dialyzer 1.2.0

#### Improvements and New Features

- Dialyzer works with the open source and commercial versions of Erlang/OTP R10B-2 on all platforms (i.e., HiPE support is not a prerequisite anymore).

- Whenever a .beam file contains abstract code (i.e., has been compiled with the +debug_info option), the analysis starts from this code rather than from BEAM bytecode -- this makes the results identical to those obtained by analysis starting from source code. (This is a contribution from Bjorn Gustavsson - Thanks!)

- Added -pa command line option for easier handling of -include_lib() directives in source code.

- Includes all changes added in v1.1.1; see below. The "Add Recursively" functionality is also available in the command-line mode (-r option).

### 1.35 Dialyzer 1.1.1

#### Fixed Bugs and Malfunctions

- Fixed problems using the shell script on Solaris machines.

- Fixed small inconsistencies in Dialyzer's documentation and help.

#### Improvements and New Features

- The command-line mode of Dialyzer spits discrepancies in stdout by default and returns a numeric value indicating its exit status.

- Added "Add Recursively" button contributed by Martin Bjorklund (thanks!).

### 1.36 Dialyzer 1.1.0

#### Improvements and New Features

- Dialyzer works with the open source version of Erlang/OTP R10B-1 (on platforms where HiPE support is available) and it does not require installation of a customized Erlang/OTP system anymore.

- Dialyzer comes with an extensive command-line interface, in addition to an enhanced GUI.

- Analysis can start from source code (through Core Erlang) as well as from BEAM bytecode.

- Dialyzer finds considerably more discrepancies in Erlang code than previous versions.

- Added ability to selectively turn on/off different warning categories.

### 1.37 Dialyzer 1.0.1

#### Fixed Bugs and Malfunctions

- Fixed major bug of v1.0.0 which caused the analysis to stop prematurely (i.e., without properly reaching fixpoint) when analyzing more than one module. This did not affect correctness of the results, but lost many opportunities to detect discrepancies.

#### Improvements and New Features

- Performance improvements in the analysis.

### 1.38 Dialyzer 1.0.0

#### Improvements and New Features

- Initial Dialyzer version: Analysis starts from BEAM bytecode only and only a GUI version is available. Dialyzer reports discrepancies in the use of the "sequential" part of Erlang. To be used, Dialyzer requires the presence of a specific snapshot of Erlang/OTP which can be obtained from Dialyzer's homepage.