Applies to Product(s):

8265 - Control Point /Switch Module (Faceplate: CPSW; FC 6501) 8265 - Control Point/Switch Module (Faceplate: CPSW2; FC 6502)

Boot + Flash EEPROM Version	CPSW		4P155 A4-MB155 (FC 6543 A4-MF155 (FC 6540)	1P622 A1-MF622 (FC 6511) A1-SF622 (FC 6512)	8371 Blade (FC 6616 or FC 6617)	Carrier 2.0 (ATM Kit) A-CMU2 (FC 6558) Resident(s): (No Resident Card)	Carrier 2.5 (ATM Kit) A-CMU2.5S (FC 6559) Resident(s): **ACE Card (E1/T1 Pabx) from Fibercom **FRAIM (Frame Relay) from Odetics **ESCON (Channel Adapter) from Bustech	Carrier 2.5 (ATM Kit) A-CMU2.5A (FC 6560) Resident(s): A-MSS	Carrier 2.5 (ATM Kit) A-WAN2.5 (FC 6561) Resident(s): A8-WAN (E1/T1/E3/DS3/OC3/STM1) A8-WAN (IMA E1/T1)
	FC 6501	*FC 6502
v.3.2.0	1D02	NA	1D03, 2D03, 1D23,2D23, 2D04,3D04	NA	NA	NA	NA	NA	NA
v.3.3.0	1D12	NA	1D23,2D23 2D04, 3D04	2D23	NA	2D23	NA	NA	NA
v.3.3.2	1D13	NA	1D23,2D23, 2D04, 3D04	2D23	NA	2D23	NA	NA	NA
v.3.3.4	1D13	NA	1D23 2D23	2D23	NA	2D23	NA	NA	NA
v.3.3.5	1D13	NA	1D23 2D23/2D04	2D23/2D04	NA	2D23/2D04	NA	NA	NA
v.4.0.0	1D13	2D13	1D23 2D23/2D04 3D04	2D23/2D04 3D04	NA	2D23/2D04	2D14	2D14	2D14
v.4.0.1	1D13	2D13	1D23 2D23/2D04 3D04	2D23/2D04 3D04	NA	2D23/2D04	2D14	2D14	2D14
v.4.1.0	1D13	2D13	1D23 2D23/2D04 3D04	2D23/2D04 3D04	NA	2D23/2D04	2D14	2D14	2D14
v.4.1.2	1D13	2D13	1D23 2D23/2D04 3D04	2D23/2D04 3D04	2D23/2D04 3D04	2D23/2D04	2D14	2D14	2D14
v.4.1.3	1D13	2D13	1D24/2D05/ 3D05	2D05/3D05	2D05/3D05	2D05/3D05	2D15	2D15	2D15
v.4.1.4	1D13	2D13	1D24/2D05/ 3D05	2D05/3D05	2D05/3D05	2D05/3D05	2D15	2D15	2D15
v.4.2.1	1D13 1D16	2D13 2D16	1D24/2D05/ 3D05	2D05/3D05	2D05/3D05	2D05/3D05	2D15	2D15	2D15
v.4.2.2	1D13 1D16	2D13 2D16	1D24/2D05/ 3D05	2D05/3D05	2D05/3D05	2D05/3D05	2D15	2D15	2D15

LEGEND:
A table cell entry is compatible with all other table cell entries in the same row of cells, i.e. if your 8265 is at microcode level V3.3.4, the 4P155 FPGA code can be either 2D23 or 2D04, but a module with an FPGA level at 1D23 can not support 2D23 or 2D04 FPGA level (the first digits have to be the same).

FPGA Level XDYZ

X=> Version of Xilinx Chips
X=1 applies to modules equipped with 4020-3 Xilinx chips
X=2 applies to modules equipped with 4020-2 Xilinx chips
X=3 applies to modules equipped with 4020-36 Xilinx chips(cost reduction module)

NOTE: A module with FPGA level 1D23 CANNOT support 2D23 or 2D04 FPGA levels.

YZ=> Version of FPGA picocode level
NOTE: 2D04 & 3D04 are applied to two different Xilinix chip modules but have the same FPGA picocode level.

*8260 Modules are not supported in an 8265 chassis equipped with a CPSW FC 6502.
All modules, including Carrier Modules, listed in the table above are not supported in the 8260.
** IBM ONLY supports the Carrier Module of these Resident cards. Please contact the individual vendor(s) for Resident card configuration, usage, and product defect support.