OS/2 Warp Server Advanced V4 SMP TCP/IP Stack RSU Page

Overview

This page provides an automated update (via RSU) of your OS/2 Warp Server Advanced V4 SMP TCP/IP stack. This is a consolidation of IBM service fixes to the stack since GA of OS/2 Warp Server Advanced V4 SMP.

Requirements:

To apply this update, you must have the following installed: Warp Server Advanced V4 SMP, MPTS Ver 5.20x (e.g., 5.20, 5.20.1, etc.), CSD WR0850x (e.g., WR08500, WR08503, etc.).

Note: WR08503 is the latest MPTS FixPak for the OS/2 SMP TCP/IP stack. It may be obtained either electronically or on 3.5" diskette by contacting Software Solutions Services at 1-800-992-4777.

For a list of all APAR fixes that are included in this update, see the read.me file for the latest OS/2 Warp Server Advanced V4 SMP TCP/IP stack APAR fix.


Notes:

• You can ignore the installation instructions in the read.me file since all updates will be done automatically.

Installation

1. Apply the Software Update
   If you encounter a problem installing the update:
   • Did you immediately get an error processing the latest35.rsu file? If so, you probably need to download rsuinst.exe and follow the directions to enhance your WebExplorer.
   • Did you get a failure on the ftp of smprsu.zip?
     • The ftp server may be down or busy - try again later.
     • Are you connecting to the Internet from behind a firewall? You'll have to apply the update manually.
   • Did you get a message box saying "Wrong Config!"? The update program determines the drives and directories to be updated by looking in the PATH environment variable for the first instance of the \MPTN, \TCPIP, and \IBMCOM directories. If any of these directories are missing from your PATH environment variable, you have an incorrectly configured system and the update cannot be done.
   • Did you get a message box saying you have the wrong MPTS version number or wrong MPTS CSD level? See the requirements above.
     The update program verifies the current MPTS level by checking SYSLEVEL.MPT in your \MPTN drive and directory, as determined by the first instance of \MPTN in your PATH environment variable. If you have multiple levels of MPTS installed on your workstation, be sure you boot with the PATH environment variable pointing to the correct \MPTN directory for the update. (Also, the correct \TCPIP and \IBMCOM directories.)

2. Shutdown and reboot your system.
   Your system should start normally and all file changes will be in effect.

3. When your system has completed startup, you can verify that the TCP/IP stack has been updated and is running by issuing the following command from an OS/2 command prompt:
   INETVER
   The following should be displayed:
   Inet Version: 3.50k, 3.50e

If you cannot apply the update automatically, you can install it manually. Download the update file, smprsu.zip, storing it in a temporary directory, and unzip it. Enter the following command to perform the update:
INSTAPAR
You can delete all the files in the temporary directory when the update is complete. Reboot and verify the installation of the stack as described above.