UPDATES TO DCCONNECT CLIENT/752X EMULATOR FOR DOS SINCE THE 1.4.0 RELEASE (8/1999)
----------------------------------------------------------------------------------
This file catalogs updates made to the various flavors of the DCConnect Client/
752X Emulator for DOS that were released on CD as version 1.4.0 in August 1999.
Note: Starting with the 1.4.0M fix pack, the product has been renamed to the
'DCConnect Client'. The documentation and product screens now reflect
that new name. However, there are still some remnants of the old
product name in the names of some of the files that are part of the
product (e.g. EMULATOR.INI, EM.BAT).
Where possible, the term 'the Client' will be used instead of 'the
emulator'.
This package includes fixes for all flavors of the Client. The self-extracting
zip file is named CLNTvvvn.EXE where 'vvv' is a version number such as 200 for
version 2.0.0 or 210 for version 2.1.0 and 'n' is a letter from 'A' to 'Z'
indicating the sub-version of Client contained in the fix pack. It's also
possible to have the 'vvv' without any 'n' sub-version following it.
For example the fix pack for sub-version A of version 2.1.0 of the Client is
called CLNT210A.EXE.
For the remainder of this document, we will use the notation CLNTvvvn.EXE when
referring to this self-extracting zip file. But you should substitute the appropriate
version number for 'vvv' and the appropriate letter for 'n' based on the sub-version
that you have.
The self-extracting zip file CLNTvvvn.EXE contains the following files:
Documentation
-------------
CLIENTFX.HTM - This file
MANUALS\DCCLIENT.HTM - Documentation for DCConnct Client/752x Emulator for DOS
MANUALS\7524ETS.HTM - Technical Reference for DCConnect Client - includes
information about CFR APIs, internal file formats and
the communications protocol.
MANUALS\E9GWROOT.HTM - Part of Technical Reference
MANUALS\E9GWTOC.HTM - Part of Technical Reference
DOS-based Device-Specific files
-------------------------------
6400\6400BC.CFG - Input file for 6400 Bar code configuration
6400\6400BC.EXE - Bar code Configuration program for 6400 terminals
6400\6400_TSR.EXE - TSR needed for the Client to control the scanner.
6400\6400DISP.EXE - Tool to configure the 6400 display.
ANTARES\ETSPB.EXE - DOS version of serial Client that runs only on the
Intermec Antares line of terminals.
ANTARES\ETSPT.EXE - DOS, TCP/IP-attached version of the Client that
runs only on the Intermec Antares line of terminals.
ANTARES\FLASHLDR.BIN - File needed by LOADER.EXE to load terminals
ANTARES\LISTFILE.DOS - Used with DOWNLOAD.BAT to load DOS files to Antares
ANTARES\LOADER.EXE - DOS-based file load utility from Intermec
ANTARES\LOAD1.BAT - Batch file for loading a single file to the terminal
ANTARES\LOAD2.BAT - Batch file for loading two files to the terminal
ANTARES\SETUPANT.EXE - Utility program for changing Antares configuration
ANTARES\T24FCOPY.EXE - Windows-based file load utility provided by Intermec.
It can be used to upload or download files to Antares
terminals.
ANTARES\T24FCOPY.HLP - Help file for T24FCOPY.EXE
ANTARES\USER.BAT - Called by AUTOEXEC.BAT to start Client automatically
ANTARES\SAMPLE\DOWNLOAD.BAT - Sample download batch file to use with LOADER.EXE
ANTARES\SAMPLE\EM.BAT - Sample version of EM.BAT for Antares
ANTARES\SAMPLE\EMULATOR.INI - Sample version of EMULATOR.INI for Antares
ANTARES\SAMPLE\S.BAT - Easier-to-type sample batch file for calling SETUPANT.EXE
ANTARES\SAMPLE\SETUPANT.INI - Sample input file for SETUPANT.EXE
ANTARES\SAMPLE\UPGRADE.BAT - Alternate UPGRADE.BAT used when loading Intermec flash
to Antares terminals.
FALCON\FALC_TSR.EXE - TSR needed by the Client in order to distinguish between
keyboard and scanner input on the Percon/PSC Falcon and its
twin the LXE MX2.
LANPTPRO\PREPOST.EXE - Utility for configuring the bar code pre/postamble on the
Intelligent Instrumentation LanPoint Pro (aka Symbol FMT3000).
SPEC24\CFG3000.EXE - Configuration utility for Symbol Spectrum 24 terminals. It
modifies INIT.EXE.
SPEC24\ETSPT.EXE - DOS, TCP/IP-attached version of Client used by the
Symbol Spectrum 24 terminals. It uses Novell's LAN
Workplace for DOS. The terminals are shipped by
Symbol with the Novell software installed.
SPEC24\FLSHBLD.EXE - Self-extracting zip file containing the set of files
used when flashing the Symbol Spectrum 24 terminal.
SPEC24\S24_TSR.EXE - Required for use of the scanner and Serial port on Symbol
Spectrum 24 terminals
TELXON\HHB.EXE - Version of Telxon's HandHeld Bridge that runs on the PC
TELXON\HHB.TXT - Documentation for Telxon's HHB.EXE
TELXON\HHBR.EXE - Version of Telxon's HandHeld Bridge that runs on the terminal
TELXON\HHBR.TXT - Documentation for Telxon's HHBR.EXE
TELXON\TELXONBC.EXE - Bar code Configuration program for Telxon terminals
TELXON\TELXONBC.CFG - Input file for Telxon Bar code configuration
TELXON\T870_TSR.EXE - TELX_TSR.EXE for use on PTC870; it is required for
any scanner use on this terminal
TELXON\TELX_TSR.EXE - Optional TSR for Telxon 960SL/X, 860IM; provides
RS-232 support and enhanced scanner support
TELXON\WANDTSR.EXE - TSR required for scanner support on Telxon 960SL/X, 860IM
Two DOS Flavors of the Client that Communicate to DCConnect Serially
--------------------------------------------------------------------
SERIAL\ETSPB.EXE - Serial-attached version of the Client for use on
DOS devices.
SERIAL\NLS\ETSPB.EXE - DOS version of serial Client built with different
video routines that use whatever code page is
set in DOS for displaying characters. Does not
work on all devices (but does work on Janus 2050).
Various DOS flavors of the Client for different TCP/IP stacks
-------------------------------------------------------------
TCP_FTP\ETSPT.EXE - DOS, TCP/IP-attached version of the Client requiring
FTP Software's PC/TCP Network Kernel for DOS.
TCP_FTP\NLS\ETSPT.EXE - DOS Version of TCP/IP Client for FTP stack built
with different video routines that use whatever
code page is set in DOS for displaying characters.
Does not work on all devices (but does on Janus 2050).
TCP_IBM\ETSPT.EXE - DOS, TCP/IP-attached version of the Client requiring
IBM DOS TCP/IP Support. Also runs in a full screen
DOS session of OS/2.
TCP_NOV\ETSPT.EXE - DOS, TCP/IP-attached version of Client requiring
Novell's LAN Workplace for DOS.
TCP_VSL\ETSPT.EXE - DOS, TCP/IP-attached version of Client that requires
the Virtual Socket Library from JSB Software.
Client Files for Use on 32-bit Windows Platforms (95/98/Me/NT/2000/XP)
----------------------------------------------------------------------
WIN32\ETSPT.EXE - Windows 95/98/Me/NT/2000/XP TCP/IP-version of Client.
Uses networking support that is provided by the operating
system. This is the stub executable that is
run to start the Client; the majority of the program
is in WIN32\ETSPT.DLL.
WIN32\ETSPT.DLL - Windows 95/98/Me/NT/2000/XP TCP/IP-version of Client DLL;
requires WIN32\ETSPT.EXE to start it.
WIN32\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for the 32-bit Windows flavor of
the Client.
Client Files for Use on Windows CE Devices
------------------------------------------
MAKECAB.BAT - Used to build Windows CE .CAB files from .INF files
DCCLIENT.INF - Sample .INF file used to create DCConnect Client .CAB
files for the various flavors of Windows CE devices.
CECONFIG.VB - Microsoft eMbedded Visual Basic executable for the IBM
CE Config Tool. This tool uses an .INI file to set up
registry values, create files, and perform file and
directory operations for the purpose of automating
the configuring a Windows CE device. Provides the
ability to prompt the user for certain values, including
the ability to provide a list of valid choices, while
automating the setting of any values that would not
change.
CECONFIG.INI - Sample .INI file used by the IBM CE Config Tool.
Includes sample commands for setting registry keys
and creating a file.
ETSUSER.C - Sample source for building Windows CE DLL needed
on some devices to run the Client in 'full-screen'
mode. Also can be used to add customer menu items
to the Client's pull-down menus.
ETSUSER.DEF - Sample module definition file to go with ETSUSER.C
ETSUSER.VCN - Microsoft eMbedded Visual Toolkit makefile file used
to build various flavors of ETSUSER.DLL from the
source files ETSUSER.C and ETSUSER.DEF.
ETSUSER.VCP - Microsoft eMbedded Visual Toolkit projecte file used
to build various flavors of ETSUSER.DLL from the
source files ETSUSER.C and ETSUSER.DEF.
ETSUSER.VCW - Make file generated by Microsoft eMbedded Visual
Toolkit; used to build various flavors of ETSUSER.DLL
from the source files ETSUSER.C and ETSUSER.DEF.
NMI600.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the Intermec 600.
Also used with the various Windows CE makefiles that
are part of the CFR packages.
NMI700.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the Intermec 700.
Also used with the various Windows CE makefiles that
are part of the CFR packages.
NMI5020.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the Intermec 5020.
(running Windows CE 3.0). Also used with the various
Windows CE makefiles that are part of the CFR packages.
NMI6651.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the Intermec 6651.
Also used with the various Windows CE makefiles that
are part of the CFR packages.
NMLPTCE.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the Intelligent
Instrumentation LanPoint CE. Also used with the
various Windows CE makefiles that are part of the
CFR packages.
NMX86EM.BAT - Batch file to use with the makefile ETSUSER.VCN in
order to build ETSUSER.DLL for the MS Pocket PC
Emulation environment. Also used with the
various Windows CE makefiles that are part of the
CFR packages.
IMEC600\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for
the Intermec 600 terminal. Uses networking support
that is provided by the operating system. This is the
stub executable that is run to start the Client; the
majority of the program is in IMEC600\ETSPT.DLL.
IMEC600\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the Intermec 600 terminal; requires IMEC600\ETSPT.EXE
to start it.
IMEC600\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for Intermec 600
IMEC600\SAMPLE\IMEC600.INF - Sample .INF file used with MAKECAB.BAT for creating
IMEC600.CAB.
IMEC700\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for
the Intermec 700 terminal. Uses networking support
that is provided by the operating system. This is the
stub executable that is run to start the Client; the
majority of the program is in IMEC700\ETSPT.DLL.
IMEC700\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the Intermec 700 terminal; requires \IMEC700\ETSPT.EXE
to start it.
IMEC700\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for Intermec 700
IMEC700\SAMPLE\IMEC700.INF - Sample .INF file used with MAKECAB.BAT for creating
IMEC700.CAB.
IMEC5020\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for
the Intermec 5020 terminal (running Windows CE 3.0).
Uses networking support that is provided by the
operating system. This is the stub executable that
is run to start the Client; the majority of the program
is in IMEC5020\ETSPT.DLL.
IMEC5020\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the Intermec 5020 terminal (running Windows CE 3.0);
requires IMEC5020\ETSPT.EXE to start it.
IMEC5020\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for Intermec 5020
IMEC5020\SAMPLE\IMEC5020.INF - Sample .INF file used with MAKECAB.BAT for creating
IMEC5020.CAB.
IMEC6651\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for
the Intermec 6651 terminal. Uses networking support
that is provided by the operating system. This is the
stub executable that is run to start the Client; the
majority of the program is in IMEC6651\ETSPT.DLL.
IMEC6651\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the Intermec 6651 terminal; requires IMEC6651\ETSPT.EXE
to start it.
IMEC6651\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for Intermec 6651
IMEC6651\SAMPLE\IMEC6651.INF - Sample .INF file used with MAKECAB.BAT for creating
IMEC6651.CAB.
LANPTCE\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for the
Intelligent Instrumentation LanPoint CE terminal.
Uses networking support that is provided by the
operating system. This is the stub executable that is
run to start the Client; the majority of the program is
in LANPTCE\ETSPT.DLL.
LANPTCE\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the LanPoint CE terminal; requires \LANPTCE\ETSPT.EXE
to start it.
LANPTCE\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for LanPoint CE
LANPTCE\SAMPLE\LANPTCE.INF - Sample .INF file used with MAKECAB.BAT for creating
LANPTCE.CAB.
SYM81XX\SAMPLE\CECONFIG.INI - Sample CECONFIG.INI for Symbol 81xx
SYM81XX\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for Symbol 81xx
SYM81XX\SAMPLE\SYM81XX.INF - Sample .INF file used with MAKECAB.BAT for creating
SYM81XX.CAB.
X86EMDBG\ETSPT.EXE - Windows CE TCP/IP Sockets version of Client for the
Microsoft Pocket PC Emulation Environment.
Uses networking support that is provided by the
operating system. This is the stub executable that is
run to start the Client; the majority of the program is
in X86EMDBG\ETSPT.DLL.
X86EMDBG\ETSPT.DLL - Windows CE TCP/IP Sockets version of Client DLL for
the Pocket PC Emulator; requires \X86EMDBG\ETSPT.EXE
to start it.
X86EMDBG\SAMPLE\EMULATOR.INI - Sample EMULATOR.INI for the Pocket PC Emulator
X86EMDBG\SAMPLE\X86EMDBG.INF - Sample .INF file used with MAKECAB.BAT for creating
X86EMDBG.CAB.
Files Used for Building CFRs to Run with the Client (DOS, 32-bit Windows, Windows CE)
-------------------------------------------------------------------------------------
CFRTOOLS\CFRAPI24.H - Header file required for compiling all CFRs
CFRTOOLS\CFRWIN32.H - Header file required for compiling Win32 and CE CFR DLLs
CFRTOOLS\BORLAND\CFRAPI24.LIB - Library file required for linking when building CFRs
with Borland Turbo C++ 3.0 for DOS
CFRTOOLS\IBMC2\CFRAPI24.LIB - Library file required for linking when building CFRs
with IBM C/2 1.10
CFRTOOLS\IMEC600\CFRAPICE.LIB - Library file required for linking CFR built for
Intermec 600 terminals
CFRTOOLS\IMEC700\CFRAPICE.LIB - Library file required for linking CFR built for
Intermec 700 terminals
CFRTOOLS\IMEC5020\CFRAPICE.LIB - Library file required for linking CFR built for
Intermec 5020 terminals (running Windows CE 3.0)
CFRTOOLS\IMEC6651\CFRAPICE.LIB - Library file required for linking CFR built for
Intermec 6651 terminals
CFRTOOLS\LANPTCE\CFRAPICE.LIB - Library file required for linking CFR built for
Intelligent Instrumentation LanPoint CE terminals
CFRTOOLS\X86EMDBG\CFRAPICE.LIB - Library file required for linking CFR built for
MS Pocket PC Emulation Environment
CFRTOOLS\WIN32\CFRAPI32.LIB - Library file required for linking 32-bit Windows CFRs
CFRTOOLS\CFRUTL24.RME - README file describing the files in the CFR utility
library package in more detail.
CFRTOOLS\CFRUTL24.HTM - More detailed documentation about each utility
routine.
CFRTOOLS\CFRUTL24.H - Include file use in building the CFR utility library -
and needed when building a CFR that uses the routines
in this library.
CFRTOOLS\*.C - Source files used to build the utility library. See
CFRTOOLS\CFRUTL24.RME for a description of each.
CFRTOOLS\CFRUTL24.MAK - Used for building the version of CFR utility library
for either the Borland Turbo C++ 3.0 for DOS compiler
or the IBM C/2 1.10 compiler.
CFRTOOLS\CFRUTL32.DSP - Project file used with MS Visual Studio for
building / working with the 32-bit Windows version
of the CFR utility library.
CFRTOOLS\CFRUTL32.DSW - Workspace file used with MS Visual Studio for
building / working with the 32-bit Windows version
of the CFR utility library.
CFRTOOLS\CFRUTL32.MAK - Generated by MS Visual Studio for building the
32-bit Windows version of the CFR utility library
CFRTOOLS\NMUTL32.BAT - Batch file used to build the 32-bit Windows version
of the CFR utility library. Uses CFRTOOLS\CFRUTL32.MAK.
CFRTOOLS\CFRUTLCE.VCN - Generated by MS eMbedded Visual Toolkit for building
the various Windows CE flavors of the CFR utility
library. Used with NM*.BAT.
CFRTOOLS\CFRUTLCE.VCP - Project file used with MS eMbedded Visual Toolkit for
building / working with the various Windows CE flavors
of the CFR utility library.
CFRTOOLS\CFRUTLCE.VCW - Workspace file used with MS eMbedded Visual Toolkit for
building / working with the various Windows CE flavors
of the CFR utility library.
CFRTOOLS\NMI600.BAT - Batch file for building Intermec 600 flavor of
cfrutlce.lib. Uses CFRTOOLS\CFUTLCE.VCN.
CFRTOOLS\NMI700.BAT - Batch file for building Intermec 700 flavor of
cfrutlce.lib. Uses CFRTOOLS\CFUTLCE.VCN.
CFRTOOLS\NMI5020.BAT - Batch file for building Intermec 5020 (running Windows
CE 3.0) flavor of cfrutlce.lib. Uses
CFRTOOLS\CFUTLCE.VCN.
CFRTOOLS\NMI6651.BAT - Batch file for building Intermec 6651 flavor of
cfrutlce.lib. Uses CFRTOOLS\CFUTLCE.VCN.
CFRTOOLS\NMLPTCE.BAT - Batch file for building Intelligent Instrumentation
LanPoint CE flavor of cfrutlce.lib. Uses
CFRTOOLS\CFUTLCE.VCN.
CFRTOOLS\NMX86EM.BAT - Batch file for building the MS Pocket PC Emulator
flavor of cfrutlce.lib. Uses CFRTOOLS\CFRUTLCE.VCN.
CFRTOOLS\BORLAND\CFRUTL24.LIB - Utility library file used when linking CFRs built with
Borland Turbo C++ 3.0 for DOS
CFRTOOLS\IBMC2\CFRUTL24.LIB - Utility library file used when linking CFRs built with
IBM C/2 1.10
CFRTOOLS\IMEC600\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
Intermec 600 terminals
CFRTOOLS\IMEC700\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
Intermec 700 terminals
CFRTOOLS\IMEC5020\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
Intermec 5020 terminals (running Windows CE 3.0)
CFRTOOLS\IMEC6651\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
Intermec 6651 terminals
CFRTOOLS\LANPTCE\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
Intelligent Instrumentation LanPoint CE terminals
CFRTOOLS\X86EMDBG\CFRUTLCE.LIB - Utility library file used when linking CFRs built for
the MS Pocket PC Emulator.
CFRTOOLS\WIN32\CFRUTL32.LIB - Utility library file used when linking CFRS built for
32-bit Windows.
CFRTOOLS\CFRSMP24.ZIP - Sample CFR package. Source, make and library
files included for DOS, 32-bit Windows and
Windows CE devices
CFRTOOLS\CFRPAN24.ZIP - Input panel driver CFR package. Source, make and
library files included for DOS, 32-bit Windows
and Windows CE devices
CFRTOOLS\CFRUTL24.ZIP - Package of useful utility routines to include in
CFRs. Source, make and library files included
for DOS, 32-bit Windows and Windows CE devices
Miscellaneous Files
-------------------
LOGFILE.LOG - Empty transaction logfile. Needed when building
Windows CE .CAB files - along with LOGFILE.NDX.
LOGFILE.NDX - Empty transaction index file. Needed when building
Windows CE .CAB files - along with LOGFILE.LOG.
To expand the file, copy it to an empty directory. If you have installed a version of
the Client from a version 2.00 CD or later, then copy this self-extracting zip file
to the directory into which the product CD was installed (e.g. C:\DCCONN\DCCLIENT)
Then run the following from that directory:
CLNTvvvn
where 'vvv' is the 3-digit version number and 'n' is a letter from 'A' to 'Z' for
the sub-version. The sub-directories will be created automatically.
Refer to the documentation in DCCLIENT.HTM for device specific instructions
about how the updated Client executable and associated files should be
loaded into the device you are using.
CHRONOLOGICAL SUMMARY OF FIXES/CHANGES
--------------------------------------
07-16-99: - Fixed temporary loss of communication problem that occurs when
loading large validation files in the serial version. End-of-
download processing which converts record separators to NULLs
was not yielding the processor thus preventing incoming host
commands from being processed.
----------------------------------------------------------------------------
End of changes in version 1.40A version of product (July 1999).
----------------------------------------------------------------------------
07-23-99: - For the SEND (:W) command, if the target is RS-232 and the
length of the data being written is 0, message 9053, RS-232
Length Error' will now be given and the transaction program
will abort. In the past 9316, BIOS ComWrite error was given in
this error situation.
- Corrected/enhanced the return codes for the following CFR APIs:
- AliasTransID() now returns RANGE_ERROR, as is documented, instead
of E_PARAM - if the ID is invalid.
- ClearUserVariable() now returns RANGE_ERROR if the user variable
is invalid. Before no error was given.
- Validation() now returns FILE_NOT_FOUND if the validation
file could not be found. Before RANGE_ERROR was given in
certain error situations.
- WaitEvent() will not return TERMINAL_OFFLINE if the terminal
is put out of service during the call. This is the same
behavior as IdleManager().
- Fixed problem that occurs if you send a transaction from case
0 or 2 of a CFR. The code was trying to run some other
transaction program when the CFR completed - resulting in one of
several possible erroneous messages such as 'invalid parameter'.
----------------------------------------------------------------------------
End of changes in version 1.40B version of product (July 1999).
----------------------------------------------------------------------------
08-16-99: - Client is now considered in the transaction state when case 0
or case 2 of a CFR are run during a change to the in service state.
This fixes problem where certain keys were not being passed to the
CFR in this scenario.
08-27-99: - Fixed the DUMP MEMORY option under INFO/STATUS menu for the
CFR file (file C). Before the fix, no file data would be dumped
even when the CFR was loaded.
----------------------------------------------------------------------------
End of changes in version 1.40C version of product (August 1999).
----------------------------------------------------------------------------
10-22-99: - Fixed problem downloading transaction programs > 64K. On the
terminal the loading of file 0 would fail around block 138. So
the terminal would show:
Loading file 0: 138
and in DCConnect, there would be an error message about the
downloading failing - specifying -309 for the return code.
11-02-99: - Fixed problem allocating memory for CFRs that require > 32767
bytes of memory.
----------------------------------------------------------------------------
End of changes in version 1.40D version of product (November 1999).
----------------------------------------------------------------------------
11-09-99: - Fixed READ command so that it does not activate the scanner
unless the scanner was one of the input devices selected. At
this writing this really only affects Telxon and the Symbol
Spectrum 24 terminals; for all others the scanner is always on -
even though the Client might ignore it's input.
11-26-99: - Fixed cause of POST 82 error on startup - which might occur in
rare circumstances if there was limited free terminal memory.
Problem was there used to be an assumption that a task ID could
not be greater than 0x8000 when in fact it could.
12-02-99: - Minor changes to serial port code to turn the power on to the
serial port when a read is issued to a device (using CFR API
ComRead). Power stays on for 10 seconds - unless other reads
or writes are done. In the past, only the ComWrite API or SEND
command from a transaction program would turn the power on.
12-02-99: - Added support for Telxon 870 IM terminal. The device parameter
to use is -dPTC870.
12-02-99: - Added support for use of a TSR to handle scanning functions and
RS-232 functions. The scanning functions allow the Client to
distinguish between keyboard and scanner input and allow better
enforcement of length - for those devices which do not support
configuring preamble and postamble characters.
The RS-232 functions allow the use of the serial port on devices
that do not have a standard interface to the serial port.
As of now, two TSRs have been created to take advantage of this
new TSR interface. One is for use on the Telxon 960SL, 960X,
and 860IM terminals. The other is for the Telxon 870IM terminal.
Two new keywords for the EMULATOR.INI file tell the Client
to use the TSR for scanner/RS-232 functions: USE_TSR_FOR_SCANNER
and USE_TSR_FOR_RS232.
----------------------------------------------------------------------------
End of changes in version 1.40E version of product (November 1999).
----------------------------------------------------------------------------
12-14-99: - Fix for error message/bad return code when writing to serial
port from transaction program/cfr. Return code was not being
set properly.
- Added support for Antares terminals in the serial version of
Client. Includes full scanner support too.
12-16-99: - Scrolling using the arrow keys is now available. This allows
you to view out to column 40 and down to row 20 on devices such
as the Telxon PTC960 which do not have that many rows or columns.
- The command line parameter -h for specifying the host IP address
and port number will now assume the port is 7500 if only the IP
address is specified.
- Moved into EMULATOR.INI from the menus all configuration parameters
that were not already configurable from EMULATOR.INI. This was
done for future consistency and to save space. The menus will be
just for diagnostic tools and exiting the program.
A couple command line parameters also now have equivalents in
EMULATOR.INI
The new commands in EMULATOR.INI are:
NUM_ROWS
NUM_COLS or NUM_COLUMNS
STATUS_ROW
MSG_BUFFER_FULL
MSG_WAITING_FOR_FILES
TCPIP_PORT
TCPIP_HOST
RESEND_TIMER
ADDRESS
BAUD_RATE
COM_PORT
DEVICE
Please refer to the latest version of DCCLIENT.HTM for a
description of how they are used.
----------------------------------------------------------------------------
End of changes in version 1.40F version of product (December 1999).
----------------------------------------------------------------------------
01-20-00: - Fixed problem handling duplicate messages in TCP/IP versions of
the Client. When a duplicate was received, if the sequence
of the current message matched the one from the saved response,
the saved response should have been resent. The problem was the
saved sequence number was never being updated and thus the resend
of a saved response never occurred when it should have. With this
fix, communications with DCConnect is now more tolerant of packets
that are lost or duplicated in the network.
----------------------------------------------------------------------------
End of changes in version 1.40G version of product (January 2000).
----------------------------------------------------------------------------
01-24-00: - Added support for Intermec's Antares line of terminals. Special
executables specific to Antares terminals were created for both
the serial and TCP/IP flavors of the Client. Because of the
design of Antares terminals, TCP/IP attached Antares terminals
must be configured to use the same port number as DCConnect.
01-25-00: - Removed from the menus, all of the menus related to configuring
parameters since all parameters can now be configured via the
EMULATOR.INI file (see 12-16-99 comment above). The main menu
now has the following options:
1) VERSION INFO
2) TXTN COUNT
3) TRACE LOG
4) DUMP MEMORY
5) VIEW SETTINGS
6) CLOSE MENUS
X) EXIT PROGRAM
The first 4 options are the same as what used to be on the
INFO/STATUS menu. Option 5 is new and it allows you to view the
current setting of all parameters that could be configured using
EMULATOR.INI - but it does not allow you to change any of them.
Option 6 is for leaving the menus without ending the Client.
And Option X is just like the former 'EXIT TO DOS" option but has
been reworded so it is applicable in non-DOS environments.
Due to these changes the size of the Client was reduced by
5K - 10K which should allow more space for downloading files.
----------------------------------------------------------------------------
End of changes in version 1.40H version of product (February 2000).
----------------------------------------------------------------------------
02-02-00: - For Antares, removed the TRACE LOG and DUMP MEMORY diagnostic
options from the menus to save +5K in the executable size. The
Antares has less available memory than the other terminals.
- Changed the underlying code for the CFR API GetTerminalAddress
so that it no longer uses the C function sprintf(). Prior to
this change, calling this CFR API could cause a runtime stack
overflow error if the CFR stack was not big enough.
02-03-00: - Restructured CFRAPI24.LIB so that every function in it is now in
it's own .OBJ file. This can reduce the CFR size up to 3K,
depending on how many CFR API functions are being used.
----------------------------------------------------------------------------
End of changes in version 1.40I version of product (February 2000).
----------------------------------------------------------------------------
02-18-00: - The transaction program file can now be greater than 99999 bytes
in size. In order to take advantage of this change, Fix Pack D
for the 1.4.0 CDs of DCConnect must be installed.
5 bytes are used to specify the size. If the size is > 99999, the
first byte is 'A' to 'Z' indicating a multiple of 65536, where
'A' is a multiple of 1. The remaining 4 bytes is a hex value from
0x0000 to 0xFFFF specifying the remainder value to be added to the
value derived from the first byte - resulting in the true file
size.
03-03-00: - Fixed date roll over problem. At midnight the terminal date would
intermittently fail to be updated. The terminal continues to
display the correct time, but the date can be off by one or more
days. The problem appears to be one with DOS itself failing to
reflect the change in date if a request to get the date and time
is being made right at midnight.
The Client now detects the problem and corrects the date within
a second after midnight, or sooner if the Client needs to get the
date/time for a transaction, CFR call, ...
----------------------------------------------------------------------------
End of changes in version 1.40J version of product (March 2000).
----------------------------------------------------------------------------
03-30-00: - Changed the start up code to clear the opening screen when the
terminal is put out of service at the start of a download. This
fixes a problem trying to run a mode 2 CFR in the case that the
download completes before the 20 seconds that the opening screen
automatically times out after.
04-03-00: - Fixed problem calling CallKeyDef from a mode 2 CFR (one that
never returns from a function 0 or 2). A return code of
TRANS_IN_PROGRESS would always be given. This problem was
introduced with the 8-16-99 fix (see above) for a problem getting
certain keystrokes in a CFR.
----------------------------------------------------------------------------
End of changes in version 1.40K version of product (April 2000).
----------------------------------------------------------------------------
04-20-00: - Made a couple of changes to improve performance on Antares.
----------------------------------------------------------------------------
End of changes in version 1.40L version of product (April 2000).
----------------------------------------------------------------------------
05-01-00: - Another fix for Antares - possible mix up of messages generated
when duplicate messages are received.
----------------------------------------------------------------------------
End of changes in version 1.40M version of product (May 2000).
----------------------------------------------------------------------------
5-24-00: - Added new CFR API called KbdHandleArrowKeys. This allows a CFR
to turn on and off the Client's handling of the arrow keys to
scroll the window. The format of the API is:
USHORT KbdHandleArrowKeys (UCHAR flag);
where 'flag' is either HANDLE_ARROWS_YES or HANDLE_ARROWS_NO.
By default the Client filters out the arrow keys and scrolls the
screen based on the key pressed. But if the Client has been told
not to filter out the arrow keys, then the CFR can receive these
keys using KbdReadAscii(). The values for the arrow keys, which
are defined in CFRAPI24.H are CURSOR_UP, CURSOR_DOWN, CURSOR_LEFT
and CURSOR_RIGHT.
5-25-00: - Found that several CFR APIs were missing from the Windows/NT and
Windows CE versions of the Client. The missing CFR APIs were:
QueryTransactionCnt, SendTransaction, AliasTransID,
GetTerminalAddress, GetPowerState, KbdGetShift
5-26-00: - For the Windows versions of the Client, XON/XOFF was not
explicitly being turned off when the configuration indicated it
should not be on. Therefore the previous setting would stay in
effect.
----------------------------------------------------------------------------
End of changes in version 1.40N version of product (May 2000).
----------------------------------------------------------------------------
6-14-00: - Added a TSR for use with Symbol Spectrum 24 terminals. This TSR
provides support of the serial port as well as scanner support,
which allows the Client to be able to distinguish between keyboard
and scanner input.
----------------------------------------------------------------------------
End of changes in version 1.40O version of product (June 2000).
----------------------------------------------------------------------------
7-12-00: - For the Intermec 5020 version of the Client, certain CFR APIs did
not work correctly because the Client was not being built with the
8 byte alignment that is required by all applications that run on
this device.
7-21-00: - The CFR API ClearUserVariable() can now be used to clear the
transaction buffer by passing a -1 in for the user variable
number. The constant TRANS_BUFFER has also been added to
CFRAPI24.H for this purpose.
----------------------------------------------------------------------------
End of changes in version 1.40P version of product (July 2000).
----------------------------------------------------------------------------
8-22-00: - Fixed a memory fragmentation problem that would cause downloads
to fail even when there was sufficient memory in total. When the
problem existed, a restart of the Client would allow the download
to complete successfully.
The problem was caused by the fact that space occupied by the CFR
was not freed until several allocations for other files were
attempted. So the space occupied by the CFR from a previous load
was locked while the first couple of allocations were attempted.
If one of the earlier files grew in size, other files would no
longer fit before the CFR - and if there wasn't sufficient space
after, the allocation would fail. Now the CFR is freed at the
start of the download.
The problem was found on the Antares terminal - which has less
memory than most other terminals. However, the problem has
always existed and could have affected any terminal.
----------------------------------------------------------------------------
End of changes in version 1.40Q version of product (August 2000).
----------------------------------------------------------------------------
8-23-00: - Modified the SHOW_IDLE_TIME keyword for EMULATOR.INI to allow you
to specify a date and/or time format. These would override the
formats that are downloaded from DCConnect (which aren't currently
able to be changed any way!) The choices for date format are:
MMDDYY YYMMDD DDMMYY JJJYY YYJJJ
the choices for time format are:
12 24
If both date and time are to be shown, separate the date and time
format by at least 1 space or comma. Here are some examples:
To show just the date using MMDDYY format, add the following line
to EMULATOR.INI:
SHOW_IDLE_TIME = MMDDYY
To show the date using YYMMDD and the time using 24 hour format,
add the following line to EMULATOR.INI:
SHOW_IDLE_TIME = YYMMDD, 24
To show just the time in 24 hour format, add the following line to
EMULATOR.INI:
SHOW_IDLE_TIME = 24
Using SHOW_IDLE_TIME = Y is still supported and will use whatever
formats are dowloaded from DCConnect (which are currently YYMMDD
and 12 hour time).
- The date separator can now be changed using the new keyword in
EMULATOR.INI:
DATE_SEPARATOR = -
where the valid choices to the right of the equal sign are - / or .
If this keyword is not used, the default date separator is the
slash (/) character.
- The time separator can now be changed using the new keyword in
EMULATOR.INI:
TIME_SEPARATOR = .
where the valid choices to the right of the equal sign are . or :
If this keyword is not used, the default time separator is the
colon (:) character.
8-31-00 - Fixed a problem with the Win32 version of the Client trapping if
a download is started while the Client code is looping in a CFR
and not responding to the TERMINAL_OFFLINE return code.
All versions of the Client will now respond to the CFR memory
allocate request during the download with a no memory available
response if the request is received while the CFR is actively
running.
----------------------------------------------------------------------------
End of changes in version 1.40R version of product (August 2000).
----------------------------------------------------------------------------
9-21-00: - Added support for new keyword in EMULATOR.INI for disabling the
arrow keys. If the following statement is added to EMULATOR.INI:
IGNORE_ARROW_KEYS = Y
then pressing the DCConnect Client will no longer perform scrolling
of the screen when the arrow keys are pressed.
----------------------------------------------------------------------------
End of changes in version 1.40S version of product (September 2000).
----------------------------------------------------------------------------
9-27-00: - Message 9801 (Error in program command string) has been changed
to show the actual program command string that is in error. This
should help to understand what is going wrong - although it
requires you know the raw program data format (e.g. RETURN = :R)
9-29-00: - Added to the menus, the ability to view the contents of user
variables. A new DIAGNOSTICS sub menu was added to the main
menu and the options TRACE LOG and DUMP MEMORY were moved to
this menu from the main menu. You can view the contents of any
user variable from 0-99 and you can specify to view the next
non-blank user variable, given some starting point.
9-30-00: - Added the ability to step through a transaction program for
debug purposes. Turning 'stepping' on and off is done using an
option on the new DIAGNOSTICS menu. When stepping is active,
the next command to be executed is shown at the bottom of the
screen. You must press Enter to move to the next step. You
can also press Esc to turn stepping off at any step in the
program.
10-23-00: - In order to allow larger downloads, paging of the transaction
program file (file 0) and validation files has been implemented.
When paging is in effect, these files are loaded to the
'hard disk' of the terminal and are only loaded into the
terminal's RAM memory, as programs / validation files are
actually used. Previously, all files were loaded into RAM
memory at all times. Please see the updated documentation
regarding the new EMULATOR.INI keywords FILE_PAGING and
LOCK_IN_MEMORY for more details.
Note: In order for this feature to work properly when the
transaction program file (file 0) exceeds 99,999 bytes, you
must have a version of \DCCONN\DLL\TDCOMMON.DLL that is later
than October 19, 2000 (which will be fix pack D or later for
version 1.40 of the DCConnect products).
Note: On certain devices (e.g. Antares), writing to the 'hard disk'
is a slow operation and can therefore affect the terminal's
responsiveness during a download. To get around this, the Poll
Timeout parameter for the line will probably need to be increased
in the DCConnect Line Settings notebook. By default this timeout
is usually around 0.5 seconds. We've found that 1.5 seconds is
usually sufficient - for both TCP/IP and serial lines. If the
timeout is not increased, you may start seeing more 'Unexpected
data' messages during the download or the download may fail
altogether during the download of the transaction program file
or a validation file - because the terminal did not respond in
time to the DCConnect Server's load command.
11-01-00: - Updated the Spectrum24 flash build files (FLSHBLD.ZIP) to include
the new level Symbol flash drivers( FLASHDSK.SYS, FLSHCTL.EXE and
FLSHFMT.EXE). This driver change was required because Symbol is
now using a different type flash chip on their new terminals.
The replacement drivers are compatible with both the new and the
older model terminals.
11-01-00: - Added a new KEY_CLICK ini file keyword. This keyword can be used
to turn on the terminal keyboard key click sound.
----------------------------------------------------------------------------
End of changes in version 1.40T version of product (November 2000).
----------------------------------------------------------------------------
11-09-00: - Fixed problem with Validation() API in CFR: it was failing to
find a remote validation file name when that name was at the
end of the list of valid file names (file E).
11-09-00: - Fixed problem enforcing the maximum length for a validation
request. The maximum data length is from 87 to 94 bytes
depending on the length of the validation file name (x.VAL to
xxxxxxxx.VAL). Before this fix, if the data was too long,
memory corruption occurred.
----------------------------------------------------------------------------
End of changes in version 1.40U version of product (November 2000).
----------------------------------------------------------------------------
11-29-00: - Fixed GetTerminalAddress() API for the TCP/IP versions of the
Client that run on any flavor of Windows. Prior to this fix,
the IP address would always be 0.0.0.0 - although the port number
was correct.
11-29-00: - Fixed another problem with the CFR API Validation() which occurred
when there were more than 6 validation files in use. The problem
resulted in a malformed validation transaction (it contained no
validation file name). The DCConnect Server would give an error
about this bad validation transaction.
12-07-00: - Fixed handling of different screen sizes for the 32-bit Windows
version of the Client. The window is now precisely sized based
on the -d (or DEVICE = ) parameter or by the NUM_ROWS and
NUM_COLS parameters. The window no longer has scroll bars. The
arrow keys are now used to scroll the contents of the screen -
in the same way that they are used on real terminals.
Also added the use of color for certain display attributes for
the 32-bit Windows version of the Client. The reverse attribute
shows up as white on blue. The blink attribute shows up as
white on red and the underline attribute shows up as blue on
black. Where combinations of these attributes are used, blinking
supercedes reverse which supercedes underline. For example, if
both the reverse and blinking attribute were selected, the
blinking attribute would be used - so you'd get white on red.
----------------------------------------------------------------------------
End of changes in version 1.40V version of product (December 2000).
----------------------------------------------------------------------------
12-26-00: - Fixed a problem which prevented the Client from reading
transactions from the logfile on startup. This problem
occurred when the MAX_TRANSACTIONS keyword was being used in
EMULATOR.INI and the capacity specified matched the current
capacity of the logfile.
----------------------------------------------------------------------------
End of changes in version 1.40W version of product (December 2000).
----------------------------------------------------------------------------
01-05-01: - Additional changes for handling of different screen sizes by the
32-bit Windows version of the Client (original changes made
12-07-00). Cursor positioning was incorrect and part of screen
was getting cleared when scrolling.
- Cursor positioning after scrolling was also a problem for DOS
versions of the Client. That too has been fixed.
01-15-01: - Added new EMULATOR.INI keyword POWER_OFF_TIMER to allow the user
to specify how long a terminal can remain idle before it is
automatically powered off by the Client. The format is:
POWER_OFF_TIMER = 3
where the value specified is the number of minutes. Each time
a key is pressed or a scan is done, the timer resets to the full
timeout value.
This keyword is only valid for Symbol Spectrum 24 terminals -
which don't have an easy way to configure this timeout. Most
other terminals include this kind of configuration in the native
firmware - outside the control of the Client.
----------------------------------------------------------------------------
End of changes in version 1.40X version of product (January 2001).
----------------------------------------------------------------------------
01-19-01: - For the 32-bit Windows version of the Client, using colors for the
reverse/blinking/underline attributes (as described for version
1.40V above) is now only done if the following keyword is included
in EMULATOR.INI:
COLOR_ATTRIBUTES = Y
Otherwise the attributes are displayed as they were prior to
version 1.40V.
01-22-01: - The DUMP MEMORY option on the DIAGNOSTICS MENU now handles file
0 (transaction program file) even when paging is in effect. The
contents of all transaction programs that are in memory can now
be viewed. For those programs that are not currently loaded in
memory, the string "!!<1e>" is shown.
- The TRACE LOG and DUMP MEMORY options on the DIAGNOSTICS menu
can now have the output go to the serial port of Antares terminals.
Prior to this, sending the output to the serial port did not work.
01-29-01: - Added new CFR API GetTerminalSettings(). It takes two parameter,
a pointer to the new TERM_SETTINGS structure and a value indicating
which settings should be filled in. At this time, only two
settings can be obtained: SETTING_NUMROWS and SETTING_NUMCOLS.
SETTING_ALL is also defined to get all available settings.
The TERM_SETTINGS structure contains 'numRows' and numCols'. These
can be used to find out the physical dimensions of the view port
of the screen (e.g. 16x21 for PTC960, 20x40 for JANUS2050, 15x20
for INTERMEC6400, ...). In the future, if we find additional
terminal settings need to be added to this structure, they will
be added at the end and new SETTING_ values will be defined.
SETTING_ALL will always be defined as a union of all the other
SETTING_??? constants.
Here's an example of the APIs use:
...
UCHAR numRows;
UCHAR numCols;
int main(int func, char * parms)
{
TERM_SETTINGS termSettings;
GetTerminalSettings(&termSettings,
SETTING_NUMROWS | SETTING_NUMCOLS);
numRows = termSettings.numRows;
numCols = termSettings.numCols;
...
}
- Fixed minor problem for Antares terminals in a TCP/IP network in
the situation where an ill-formed packet was received. The
bad packet was not being discarded properly. This actually would
only occur if the DCConnect Server or other server were actually
generating the packets badly. (This problem was found when the
terminal was talking to an echo server, not the DCConnect Server).
- The version description string (shown in parenthesis in the title
on the MAIN Client menu) now uses "ANT" for "Antares", "BAT" for
"batch" and "UDP" for most TCP/IP versions of the Client except
for those that actually use TCP stream sockets - like the Antares.
- The GetTerminalAddress API no longer includes the port number for
versions of the Client using TCP stream sockets (Antares) because
the port number can vary each time the terminal connects with the
DCConnect Server.
01-30-01: - Added the display of the message "SWITCHED HOSTS!" if the Client
detects that a different DCConnect Server is talking to it. That
message is followed by a message showing the IP address of the
new host.
----------------------------------------------------------------------------
End of changes in version 1.40Y version of product (January 2001).
----------------------------------------------------------------------------
02-01-01: - Copyright changed to 2001.
02-05-01: - When stepping through a transaction program, the next command
now shows on the configured status row - instead of always using
the last row on the screen.
02-07-01: - Fixed problem with GOTO/GOSUB command that caused a branch
larger than 64K bytes to go to the wrong place in the transaction
program file. This problem was introduced with the 10-23-01
change for support of FILE_PAGING in version 1.40T. It is not
a problem if FILE_PAGING is in effect.
----------------------------------------------------------------------------
End of changes in version 1.40Z version of product (February 2001).
----------------------------------------------------------------------------
02-14-01: - Ran out of letters for 1.40!
----------------------------------------------------------------------------
End of changes in version 1.41 version of product (February 2001).
----------------------------------------------------------------------------
02-26-01: - Fixed the cause of a stack overflow error when using any of the
ComXXX() CFR API calls on an Antares terminal.
02-28-01: - The menu options TRACE LOG and DUMP MEMORY now work properly to
the RS-232 port for terminals that use a TSR for serial port
support (Telxon and Symbol Spectrum 24).
----------------------------------------------------------------------------
End of changes in version 1.41A version of product (March 2001).
----------------------------------------------------------------------------
03-05-01: - The menu options DUMP MEMORY and VIEW USER VAR were both
improperly showing characters with hex values greater than
or equal to 0x80. They now now show as < xx > where 'xx' is the
hex value. Before the fix they showed as < ffx where 'x' was the
first digit of the 2 digit hex value. This problem was
introduced in version 1.40T - when VIEW USER VAR was added.
03-08-01: - Fixed problem running 32-bit Windows Client on Windows 95/98.
Problem was introduced in version 1.40V.
----------------------------------------------------------------------------
End of changes in version 1.41B version of product (March 2001).
----------------------------------------------------------------------------
03-30-01: - The DUMP MEMORY option can now view any validation file, not
just 2-7. Meaningful names are now given for each file - instead
of just 0, 1, 2, ...
04-04-01: - Added support for initiation of transaction 55 when data is
received on the RS-232 port. If a transaction program is
bound to position 55 ("055: RS-232 Port" in DCConnect), then if
the terminal is idle (not running a transaction program) and any
data is received on the serial port, the "055: RS-232 Port"
transaction program will be started.
Similarly, when any transaction program ends, if there is data
remaining in the RS-232 input buffer, the "055: RS-232 Port"
program will be started right away.
It is therefore recommended that the "055: RS-232 Port" program
take care to read all data from the port before it ends.
Unlike 7527 terminals, when the RS-232 initiated program starts,
the data from the serial port is not already in user variable
0. Instead the CFR API ComRead() must be used to retrieve all
data that is in the Client's internal incoming RS-232 buffer.
This is how the 7526 terminal handles RS-232 port initiated
transactions.
RS-232 port initiated transactions are not supported with
batch versions of the Client - because of the conflict
with the Client's use of the serial port to talk to the
data collection server.
When an RS-232 initiated transaction is bound to transaction 55,
the terminal's serial interface is active at all times after
the download completes, and the port is configured based on
the RS-232 device parameters that are specified in the file 0
record 0 configuration that is downloaded.
04-04-01: - Fixed problem starting transaction program if NOOP is the first
but not the only command in a transaction program.
05-07-01: - Fixed problem allocating/freeing validation files when
FILE_PAGING is in effect and validation files are being
swapped in and out of memory. This problem could manifest itself
as a terminal lockup, 'invalid command' or 'parameter out of
range' messages, or as a 'Download error - not enough memory
available'. It might also cause downloads to fail with
a message about insufficient space - even when a reboot of the
terminal downloads successfully.
05-08-01: - Fixed an additional problem that could occur when FILE_PAGING is in
effect. At times, an attempt to start a transaction program would
result in no action (and no error message either) if that program
could not be loaded into memory - even though total available
memory was sufficient. A change to the use of compiler memory
allocation functions resolved the problem.
----------------------------------------------------------------------------
End of changes in version 1.41C version of product (May 2001).
----------------------------------------------------------------------------
05-31-01: - Added to CFRAPI24.H #definitions for PAGEDOWN_KEY, PAGEUP_KEY,
HOME_KEY, BACKTAB_KEY, INSERT_KEY and DELETE_KEY. Also typedef
for BOOL is no longer included when building Windows CFRs.
06-04-01: - Found that when using the arrow keys to scroll, if the screen
width was 40 and the right arrow was pressed, the screen would
be repositioned back at row 0 no matter where it was.
- When 'Echo to Display' is turned off for an input field, we now
show an asterisk (*) for each character that has been entered. We
used to show a blank.
06-06-01: - The POWER_OFF_TIMER keyword for EMULATOR.INI that was added in
version 1.40X for the Symbol terminals is now available for
Intermec 6400 terminals. Both ETSPT.EXE (from TCP_FTP directory)
and 6400_TSR.EXE were updated.
06-07-01: - Lots of enhancements for the CE versions of the Client:
- Added support for the Intelligent Instrumentation LanPoint CE
- Font now adjusts based on the NUM_ROWS and NUM_COLS keywords.
When closest font doesn't use whole screen, gray border is drawn.
- Extended keys now work (arrows, home, F1-F10, insert, delete)
- Arrow keys now scroll screen contents when screen dimensions
are less than 20x40.
- Menu options are grayed when another menu option is in progress
- Dump File option updated with same enhancements made in 1.41C
for all other flavors of the Client.
- COM1 now works (actually called COM1: in Windows CE)
- DUMP MEMORY and TRACE LOG memory options now work to COM1 at
19200, 8, None, 1.
- Improvements in performance for screen updates.
- Cursor now properly sized, positioned and not visible when not
in visible portion of screen.
- Fixed the DUMP MEMORY and TRACE LOG options for Antares so that
when they write to the serial port they now use 19200 just like
all the other flavors of the Client do.
- DUMP MEMORY and TRACE LOG options now work for 32-bit Windows
Client too.
- The Antares terminal will now return the bar code type in the
data (byte 0) returned by a SenRead() CFR API call. Before this
change the returned bar code type was always 0xff. Note: the
Antares does not distinguish between EAN and UPC; UPC is returned
when either an EAN or UPC code is scanned.
- Added to CFRAPI24.H the constants CODE_49, CODE_16K and PLESSEY as
possibilities for the bar code type.
- For Symbol Spectrum 24 terminals, we now return MSI bar code type
properly. We used to return 0xff.
06-08-01: - The 32-bit Windows and Windows CE versions of the Client can now
run multiple copies from the same directory, provided that the
port number is specified on the command line using the -P option.
In this situation, the logfile name will be based on the port
number (e.g. DCC07501.LOG and DCC07501.NDX) and the local copy
of a downloaded CFR will also have a name based on the port
number (DCC07501.DLL).
If the port number is not specified on the command line, then
the names LOGFILE.LOG and LOGFILE.NDX are used for the logfile.
Note 1: Even if TCPIP_PORT is specified in EMULATOR.INI, the value
for that parameter is not known at the time the logfile is
initially processed because the logfile processing is done
before EMULATOR.INI is read.
Note 2: Command line parameters take precedence over their
counterparts that might be found in EMULATOR.INI.
- The TCP/IP versions of the Client will now exit with ERRORLEVEL
set to 1 if there is an error trying to create a socket or bind
to it. This was done to allow a batch file to detect if the
Client had a TCP/IP error so that it could try a different port
number.
----------------------------------------------------------------------------
End of changes in version 1.41D version of product (June 2001).
----------------------------------------------------------------------------
06-13-01: - Fixed problem positioning cursor for scan only fields when Enter
was pressed and the Client was running on a PC that was not able
to get distinguish scanned input via a TSR or via the use of
the keyword SCAN_SENTINEL_CHARS. The cursor positioning problem
would also occur for AK and NK commands when Autofill was not
active. Also found autofill was not even properly being allowed
for the NK command.
- Added new constants to CFRAPI24.H for serial port configuration
values for baud rate, parity, data bits and stop bits. The
new constants match the old constants except that they have CFR_
as a prefix. The old constants are still in the file for use
when building 7524 or DOS CFRs. But for Windows CFRs, the
CFR_???? constants must be used because some of the others
conflict with constants in winbase.h.
The CFR_??? constants are also available when building 7524/DOS
CFRs. So the same source can be used to generate DOS/7524 and
Windows CFRs that talk to the serial port.
06-14-01: - Added ability to read scanner input from the serial port by
adding a new parameter to EMULATOR.INI:
USE_RS232_FOR_SCANNER = Y
By default, it is expected that each scan received from the
serial port will be terminated with a carriage return character
(ascii value of 13 in decimal). However, you can specify an
alternate terminating character by replacing the Y above with
the decimal number for the ascii value of that character. For
example, if the terminating character will be a line feed (ascii
value of 10 in decimal), you would use:
USE_RS232_FOR_SCANNER = 10
When using the serial port for the scanner, the port is configured
based on the RS-232 device parameters that are downloaded to the
terminal. These are configured in DCConnect from the Terminal
Settings notebook, on the Devices tab, RS-232 device page.
In this mode, the serial port is only turned on when scanner input
is expected. That is - when a DB, FB, KB or VB command is waiting
for input or when a READ command that specifies SN or SA is waiting
for input. Also, for the entire duration of any CFR call, the
scanned input could occur at any time, so the serial port will be
active then as well.
----------------------------------------------------------------------------
End of changes in version 1.41E version of product (June 2001).
----------------------------------------------------------------------------
08-08-01: - Fixed problem with use of RS-232 initiated transactions. When
CFR calls were made to read the port, the port was unnecessarily
closed and reopened - resulting in the resetting of the input
buffer and thus possibly resulting in the loss of some data that
had been read.
09-21-01: - Added support for the keyword TIMEZONE_ADJUST in EMULATOR.INI.
This keyword is primarily intended for use when the DCConnect
Client is running in a Citrix environment. For all the details
please see the section about TIMEZONE_ADJUST in the DCConnect
Client documentation.
----------------------------------------------------------------------------
End of changes in version 1.41F version of product (September 2001).
----------------------------------------------------------------------------
11-14-01: - The location of all files used by the Client on the device can
now be specified using the environment variable DCCLIENT -
except on Windows CE devices. For Windows CE devices use the
registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\IBM\DCConnect Client\path
For non-Windows CE devices, if the environment variable is not
defined, the files are looked for/created in the current directory.
Because Windows CE does not support environment variables or the
concept of the current directory, if the registry key above is
not defined, the files are looked for/created in the root directory
of the CE device.
The files affected are:
- ETSCHECK.LIC
- EMULATOR.INI
- LOGFILE.LOG and LOGFILE.NDX (used for storing transactions)
- All files that are 'paged' to disk during download
- The CFR DLL that is written to disk during download (32-bit Windows
and CE only)
12-06-01: - Windows CE only: Added support for the keyword SELECT_FONT which is
used to specify which font the Client should use on the terminal.
For all the details please see the section about SELECT_FONT in
the DCConnect Client documentation. The name of font in use can be
found on the second page of the View Settings screens.
- Windows CE only: Created the 'Diagnostics' pull-down, moved the
'Trace Logfile...' and 'Dump Memory...' options to it. Then added
the missing 'Start Stepping...' and 'View User Variables...'
options to it.
- Windows CE only: Added support of reverse video.
- Esc can now be used to exit the Transaction Count screen.
12-18-01: - Fixed problem parsing EMULATOR.INI when comments were at the end
of a line. Also fix bug printing error if TIMEZONE_ADJUST value
was invalid.
01-03-02: - Windows CE only: Fixed problem where menus would sometimes disappear
if the Client were moved to the background and back.
- Windows CE only: Pressing X to close now results in a confirmation
pop-up.
- Menu titles are now centered based on number of columns defined.
01-07-02: - Added support for MENU_PASSWORD keyword in EMULATOR.INI - which,
when used, requires the user to enter the correct password before
gaining access to any menu option. See the documentation for all
the details. This is valid for all flavors of the Client.
01-08-02: - Windows CE only: Added support for the MENU_ITEM keyword in
EMULATOR.INI. This allows for new menu items to be added to a new
'User' pull-down. These menu items are tied to user-created
functions in a DLL, ETSUSER.DLL. See the documentation for all
the details.
01-11-02: - Better checking for invalid command - especially when APNDSTR has
invalid length.
01-16-02: - Fixed problem when using TIMEZONE_ADJUST. An adjustment back to
the midnight hour (00) was incorrectly setting the hour to 24.
----------------------------------------------------------------------------
End of changes in version 1.41G version of product (January 2002).
----------------------------------------------------------------------------
01-24-02: - Batch versions of the Client that are doing dial-up will now
wait up to 10 seconds to see if the line is already
connected to the DCConnect Server before dialing. This allows
the same terminal to be plugged into a dock with a dedicated
line or a dock that requires dial-up to establish the
connection.
01-29-02: - Windows CE only: Added support for FULL_SCREEN keyword in
EMULATOR.INI. See the documentation for all the details.
Added button to toolbar for toggling software keyboard.
02-05-02: - When SHOW_IDLE_TIME was being used and NUM_COLS was used to
override the default number of columns, the time would still
be shown based on the default. This has been fixed.
- Windows CE versions of the Client now use an icon that looks
like a barcode.
02-19-02: - Windows CE only: fixed problem handling MAX_TRANSACTIONS parameter.
This was introduced with the 12-06-01 change to support the
SELECT_FONT keyword in EMULATOR.INI.
02-21-02: - The scanner is now turned on when the Client exits. This allows
testing of the scanner at the DOS prompt on an Antares and other
terminals.
02-21-02: - Fixed problem showing message on startup if the MAX_TRANSACTIONS
parameter was out of synch with the current logfile size and
the fact that transactions were in the logfile prevented the
Client from changing the size.
----------------------------------------------------------------------------
End of changes in version 1.41H version of product (February 2002).
----------------------------------------------------------------------------
02-27-02: - Added support for new EMULATOR.INI keyword IGNORE_UNDERLINE for
support of LXE's MX2 terminal and the PSC/Percon Falcon
terminal (same physical terminal). Must set equal to Y, otherwise
text that is supposed to have the underline attribute (such as
the menu titles) will not be visible. See the documentation
for a complete description of this keyword.
- Added support for new EMULATOR.INI keyword DONT_CHANGE_SCREEN_SIZE
for support of LXE's MX2 and VX1 terminals and the PSC/Percon
Falcon. Must set equal to Y, otherwise the Client might change the
screen size inappropriately.
The Client already does this when the device type is set for
certain devices such as JANUS2010/2020, PTC960, MAXILAN and
FMT10X0.
See the documentation for a complete description of this keyword.
- Fixed problem that caused a lockup on the LXE MX2 terminal. Client
was making a TSR call to set up the scanner even when the
keyword USE_TSR_FOR_SCANNER was not being used.
03-06-02: - Added support for new EMULATOR.INI keyword PF_AUTO_ENTER which
tells the Client to assume an Enter key has been pressed after
any PF Key is pressed during a READ command for which PF Key input
is allowed. This is true even when the PF Key String associated
with the pressed PF Key is 0 length.
The Client now gives an alarm beep if you try to press a key for
a PF key number that exceeds the current value of NUM_PF_STRINGS.
This applies only to READ commands with PF Strings defined as
a valid input 'device' - not using PF Keys in ONKEY/ONSUB
commands or to start a transaction program.
03-14-02: - Fixes to prevent Windows versions of the Client from trapping if
an invalid CFR is loaded.
03-29-02: - The CFR packages (CFRUTL24.ZIP, CFRSMP24.ZIP and CFRPAN24.ZIP)
are now set up to use the environment variable CFRTOOLS to find
the .H and .LIB files.
04-19-02: - Fixed problem in DOS versions of Client where startup error
messages (e.g. for missing license file) would not show properly.
05-03-02: - Added support for USE_TSR_FOR_KEYBOARD keyword in EMULATOR.INI
and created falc_tsr.exe for use with the PSC/Percon Falcon
terminal and its twin the LXE MX2 terminal. The use of this
TSR is required in order for the Client to be able to distinguish
between keyboard and scanner input on these terminals. This
keyword must be used with USE_TSR_FOR_SCANNER. See the
documentation for all the details.
05-03-02: - The specifying of a MENU_PASSWORD in EMULATOR.INI no longer
affects the Txtn Count menu option.
05-10-02: - Fixed problem showing startup messages on Windows CE - for example:
when the TCP/IP port is not available.
05-10-02: - Removed some debug message generation for COM READ errors in
WIN32 version of Client.
05-14-02: - Fixed problem with transaction logfile and index file sizes on
Windows CE devices.
05-15-02: - Windows CE only: The MENU_ITEM keyword now allows an optional
password parameter.
----------------------------------------------------------------------------
End of changes in version 1.41I version of product (March 2002).
----------------------------------------------------------------------------
06-06-02: - Version bumped up to 2.00 for release of new CD
06-06-02: - Added support for MENU_KEY keyword in EMULATOR.INI in order to
override the use of ?, = and Home for bringing up the Client
menus. See the documentation for a complete description.
06-06-02: - The MENU_PASSWORD for DOS and 32-bit Windows version of the
Client is now required when any option other than VERSION INFO
and TXTN COUNT is selected from the Main Menu. Of course if
MENU_PASSWORD is not defined in EMULATOR.INI, no password is
required.
06-13-02: - Windows CE only: the Client now handles the pressing of the
extra X button on the upper right corner of terminals that
are loaded with Pocket PC 2002.
- Windows CE only: if a second copy of the Client is started
it will now locate the first copy and bring it to the
foreground and the second copy will end itself.
06-19-02: - For 32-bit Windows flavor of the Client fixed problem setting
time on Windows 95/98/Me systems (wasn't being done at all
because a non-supported function was being called to set
privileges).
- For DOS flavors of the Client, corrected problem where time
would be off by an hour during daylight savings time
transitions. Had to request time directly from DOS instead
of using C function.
----------------------------------------------------------------------------
End of changes in version 2.00 version of product (June 2002).
----------------------------------------------------------------------------
06-25-02: - Windows CE only: For the 6-13-02 fix to handle the extra X
button in Pocket PC 2002, the Client no longer goes through
the exit process when the button is pressed. This is because
the message sent by the pressing of the extra X button is also
sent in other situations which have nothing to do with exiting
and the Client has no way to tell the difference. So the
Client will merely ensure that it is in the foreground. Before
the 6-13-02 fix, pressing the X button would move the Client to the
background.
08-01-02: - Fixed problem with backspace when getting user variable number
on the View User Var screen.
- Fixed problem where serial port could be shut off in the
middle of a dial-up attempt.
----------------------------------------------------------------------------
End of changes in version 2.00A version of product (June 2002).
----------------------------------------------------------------------------
08-15-02: - Length of phone number for modem dial-up can now be 120
characters.
08-20-02: - Fix for FLSHBLD.EXE - was not self-extracting properly.
- MAKEHEX.BAT (part of FLSHBLD.EXE for Symbol Spectrum 24
terminals) now copies EM.HEX to xxxxx.HEX where 'xxxxx'
is the parameter passed in to MAKEHEX.BAT. LOADTERM.BAT
(also part of FLSHBLD.EXE) now takes the same parameter
that MAKEHEX.BAT takes.
08-21-02: - If none of the keywords SCAN_SENTINEL_CHARS, USE_TSR_FOR_SCANNER
or USE_RS232_FOR_SCANNER were being used, the Client would
do auto-filling for READ commands that were variable length
and allowed scanning. The mistake was in the code that converted
scanner reads to keyboards reads so that you could run
transaction programs that had scan-only inputs on the Windows flavor
of the Client, for example, even when you had no ability to
scan from the PC. The auto-filling no longer occurs when it
shouldn't.
08-22-02: - Decreased MAX_TRANSACTIONS parameter to 100 from 135 in the
EMULATOR.INI provided in FLSHBLD.EXE for Symbol Spectrum 24
terminals so that we wouldn't have disk space problems when
trying to start the Client.
08-23-02: - When a terminal comes out of suspend mode, the Client now
does a few more retries to communicate with the DCConnect
Server. This is because the first attempt to send the
'I-am-here' message to the Server can sometimes get lost
while the terminal TCP/IP and radio drivers are
reinitializing themselves during the resume process.
08-26-02: - Fixed problem switching transaction logfile sizes. Would
not switch even when it was empty. Workaround was to delete
the logfile and index file (e.g. LOGFILE.LOG and LOGFILE.NDX).
- Added FLSHPREP.BAT to the self-extracting zip FLSHBLD.EXE for
Symbol Spectrum 24 terminals. This is needed in order to
load the DCConnect Client .hex file to the terminal any time
after the initial load.
- Fix for loading CFR on Windows CE devices
----------------------------------------------------------------------------
End of changes in version 2.00B version of product (August 2002).
----------------------------------------------------------------------------
08-28-02: - Client is no longer terminated when it receives a break
or terminate signal (e.g. when someone presses Cntrl-C).
You may still see the ^C show up on the screen but a
repaint of the screen will clear that up.
08-30-02: - Fix for problem with positioning of view port on the
Intermec 6400. A call that the Client was making to
obtain the current screen size was actually interpreted
by the 6400 BIOS as a request to move the view port to the
bottom of the screen. This problem was introduced with the
2-27-02 change to add support for the DONT_CHANGE_SCREEN_SIZE
keyword.
09-26-02: - Fixed problem with the get user variable host command 'Q' for
32-bit versions of the Client (Windows CE / Windows 95/98/Me/NT/200/XP).
Data corruption resulted in invalid response going back to
the Server (part of TCP/IP message number was overwritten).
----------------------------------------------------------------------------
End of changes in version 2.00C version of product (September 2002).
----------------------------------------------------------------------------
11-28-02: - Fixed problem for Symbol 38xx, 68xx terminals (spec24\etspt.exe)
in the API SpkBeep and the host beep command (CMD 5). Due to an
interrupt conflict, there could be a 10+ second delay whenever
an attempt was made to beep the speaker.
12-03-02: - Added support for TSR_INTERRUPT keyword in EMULATOR.INI and the
ability to pass in the interrupt value as a parameter for
6400_tsr.exe, falc_tsr.exe, s24_tsr.exe, and telx_tsr.exe. This
was necessary for the PSC Falcon / LXE MX2 terminal where the
use of default interrupt 0x6A caused the terminal to hang. (Found
that interrupt 0x63 worked).
12-18-02: - Win CE only: Fixed problem where screen font would change after
a certain period of usage - usually a day or two.
----------------------------------------------------------------------------
End of changes in version 2.00D version of product (December 2002).
----------------------------------------------------------------------------
03-05-03: - Fixed problem with fast-clocking transactions when no program
was bound to function 30. This was introduced in the 1.40T
version of the Client.
05-21-03: - Added support for the POWER_OFF_TIMER keyword for PSC/Percon Falcon
and LXE MX2 terminals by enhancing falc_tsr.exe.
08-14-03: - More updates to the self-extracting zip file FLSHBLD.EXE for
Symbol Spectrum 24 terminals: after load to terminal, EM.BAT
is now available to run from the DOS prompt in order to restart
the Client - just like other devices. Symbol provided a new
SCANPARM.EXE that fixed problems when trying to update the
scanner symbology configuration. Default SCANPARM.INI is
smaller.
08-27-03: - Fix for Windows and Windows CE flavors of the Client; there was a
potential for an access violation during shutdown of the Client
while trying to unload the CFR.
09-25-03: - We now build a flavor of the Client for devices with an ARM
processor (and compatible) running Windows CE 3.0 (and compatible
later versions) without Pocket PC. Two such devices are the
Symbol 88xx and the MA 1000 from Group Mobile. The executables for
this flavor of the Client are in the .\ARMNOPPC subdirectory
where the Client is installed (akin to .\IMEC700, .\LANPTCE, ...).
----------------------------------------------------------------------------
End of changes in version 2.00E version of product (August 2003).
----------------------------------------------------------------------------
10-02-03: - Added new EMULATOR.INI keyword, UV_POOL_SIZE, which allows
you to specify how much space is allocated for storing the
contents of all user variables (0-99). In the past each UV took
up 128 bytes of memory regardless of the actual content; so the 100
UVs consumed 12800 bytes of memory even if all were empty. Now a
default pool size of 10000 bytes is used for all user variables; only
user variables that contain data actually consume space in this pool.
The UV_POOL_SIZE can be from 1000 to 99999 bytes. Of course the
amount of RAM in the device places a limit on the practical maximum.
The following command in EMULATOR.INI sets the UV pool size to
5000 bytes:
UV_POOL_SIZE = 5000
Note: as part of this change, individual user variables are no
longer limited to 128 bytes. However, the transaction record and
the amount of user variable data that can be sent to the terminal
and received from the terminal is still restricted by previous
limitations. Work is in progress to increase these other limits
as well.
10-07-03: - Fixed possibility of a trap in 32-bit Windows version of the
Client if certain keys, such as the Home key, were pressed on
certain menu screens - such as the VIEW USER VAR screen.
----------------------------------------------------------------------------
End of changes in version 2.00F version of product (October 2003).
----------------------------------------------------------------------------
01-14-04: - Fixed cause of problem where a "Message 5 not found" message
would flash briefly when a download was done during a fast clocking
interval.
03-16-04: - New keywords for EMULATOR.INI: ABORT_READ_ON_RS232_INPUT
and ABORT_ONKEY_ON_RS232_INPUT can be used to interrupt
a READ/ONKEY command that is waiting for user input should
data be received on the RS-232 port.
- The CFR API ComQueryData now properly returns the number
of bytes available from the serial port.
----------------------------------------------------------------------------
End of changes in version 2.00G version of product (March 2004).
----------------------------------------------------------------------------
04-30-04: - Fixed problem handling 7 character passwords on Windows CE.
04-30-04: - ALL_SCAN_DATA_UPPER_CASE now works when USE_TSR_FOR_SCANNER
is in effect.
06-01-04: - For the -h command line parameter and the TCPIP_HOST keyword in
EMULATOR.INI, the hostname of the DCConnect Server can now be
specified instead of its IP address. For example, in EMULATOR.INI,
if the Windows flavor of the Client is running on the same PC as
the Server, the DCConnect server and port could be specified as:
TCPIP_HOST = localhost, 7500
Also a colon can now be used instead of the comma:
TCPIP_HOST = localhost:7500
06-01-04: - Added support for the Intermec CK30, Intermec CV60 and
Symbol MC 90xx terminals.
06-01-04: - Add a number of transaction programming enhancements. Please
refer to the DCTPB User's Guide for more details about each
of these:
- New SET and SETSTR commands to go along with APND and
APNDSTR commands. These new commands clear the target
before appending the data.
- The commands CURS, CLRP and SHOW can now use the
relative row/column indicators PREVIOUS_ROW,
NEXT_ROW and PREVIOUS_COLUMN, NEXT_COLUMN instead
of absolute row/column values.
- New MATH commands for performing the following
operations:
+ - \ * / % (last two are integer divide and modulus)
Numeric constants and fractional values are allowed.
- New options for the FRMT command (similar to TC):
- STRIP_LEADING_CHARS
- STRIP_TRAILING_CHARS
- STRIP_ALL_CHARS
- TAKE_LEADING_CHARS
- DROP_LEADING_CHARS
- TAKE_TRAILING_CHARS
- DROP_TRAILING_CHARS
- PAD_LEADING
- PAD_TRAILING
- TAKE_MID_CHARS
- DROP_MID_CHARS
- UPPER_CASE
- CUSTOM_STRING
- CUSTOM_INTEGER
- CUSTOM_FLOAT
- ONKEY/ONSUB now allow nearly any key using the syntax
ASCII_nnn or EXTENDED_nnn or one of the new keywords
such as KEY_ENTER, KEY_SPACE, KEY_CANCEL, ...
- The CLRP can now take a 4th parameter specifying how
many rows should be cleared - each being cleared
starting at the same column for the same number of
columns.
- Many commands now allow global variables/local variables/
parameters instead of hard-coded values or strings:
- AKA - TransID
- APND/SET - Field number
- Position
- Length
- CCFR - Parameter string
- CLRP - Row
- Column
- Length -
- # of rows
- CURS - Row
- Column
- DLAY - # of Seconds
- FRMT - Length
- Right Strip Char
- Left Strip Char
- Fill Char
- READ - Length
- SHOW - Row
- Column
- Multiple variables (including global, local and
parameters) can now be cleared in a single CLRD
command.
- Subroutines can now be passed parameters and return
data using new SUB/ENDSUB command. Up to 92
parameters can be passed. Parameters passed into a
subroutine may be global variables, local variables,
parameters from a parent subroutine, the return code
variable, numeric constants or text constants.
- Support for up to 92 local variables (new Declare command)
for each transaction program and each subroutine.
- New return code user variable that can be set via
the RETURN command or explicitly manipulated like
other variables.
- CFRs can access local variables, parameters and
the return code variable in the same way that
it can access global variables.
06-01-04: - The FULL_SCREEN keyword can now be used for Windows CE
devices that do not have Pocket PC installed.
06-01-04: - New HIDE_MENU_BAR keyword available for Windows CE
devices that need to maximize the amount of the
physical screen that is available for transaction
programs. When in effect, menus can be brought up
using the same methods available for DOS and 32-bit
Windows flavors of the Client.
06-09-04: - Fixed problem where transaction resend timer would
only be kicked off once, thus resulting in only two
send attempts for transactions.
----------------------------------------------------------------------------
End of changes in version 2.10 version of product (June 2004).
----------------------------------------------------------------------------
06-17-04: - The SET command did not clear the target when the source was
empty.
06-21-04: - The APND/SET commands now allow a variable / subroutine
parameter for the delimiter.
06-22-04: - The download of a single validation file now ensures that any
paged validation files and paged transaction programs are
unloaded before attempting to allocate memory for the new
validation file.
----------------------------------------------------------------------------
End of changes in version 2.10A version of product (September 2004).
----------------------------------------------------------------------------
10-06-04: - Added ability to view parameters on the VIEW USER VARS
screen.
10-08-04: - Fixed misalignment exception on Windows CE devices with
certain processors.
10-11-04: - For Symbol Spectrum 24 terminals (e.g. PTD6840, VRC6940,
WSS1040) had to remove support for allowing a hostname to be
provided for the TCPIP_HOST keyword and the -h command line
parameter. With this support included, the resulting
executable for the DCConnect Client was too large to run
properly.
----------------------------------------------------------------------------
End of changes in version 2.10B version of product (October 2004).
----------------------------------------------------------------------------