This topic is organized as follows:

Overview

Thank you for selecting Rational Rose RealTime, the real-time industry's leading environment that unifies software teams by integrating with best-in-class Rational products including Rational ClearCase, Rational RequisitePro, Rational Test RealTime, and Rational SoDA.

Rational Installer Incompatible with Windows "Change Journal" Feature 

Rational has determined that under certain circumstances file system corruption can result from installing Rational Version 2003 products on Windows 2000 to an NTFS partition that has the Windows "Change Journal" (log) enabled on it. Therefore, the Rational Installer will not install to such partitions. Rational is actively working with Microsoft to better understand, repair, and/or work around the problem. 

Before installing any Rational Version 2003 product on a computer running Windows 2000, please read Rational Solution 182435434 at http://solutions.rational.com/solutions/display.jsp?solutionId=182435434 for the latest information. Alternatively, you can search the Rational Solutions Knowledge Base at http://solutions.rational.com/solutions for the text "Change Journal". 

For information on licensing requirements, see the Installation Guide, Rational Rose RealTime.

Compatibility Issues

For additional information on compatibility issues, see the Product Support section of the Rational Rose RealTime web site at:

http://www.rational.com/support

[Go To Top]

General Issues and Known Problems

• Startup, Installing, and Uninstalling

• Connexis

• UNIX-Specific

• Windows-Specific

• Limitations

• Online Help

• Toolset

Startup, Installing, and Uninstalling

Installing Rational Rose RealTime after Installing Rational Suite DevelopmentStudio

If you install Rational Suite DevelopmentStudio, and then install the Rational Rose RealTime point product, select Add-Ins > Add-In Manager and select the appropriate add-ins, such as SoDA, RequisitePro, and Trace Tool.

Receiving a Warning when Missing the File Objects.dll

When installing Rational Rose RealTime on Windows, or starting Rational Rose RealTime for the first time after installing, you may receive an error message indicating the following:

 "suite objects.dll" cannot be found in the path."

This problem only occurs on Windows NT systems that have had a previous version of Rational Rose RealTime installed. To solve this problem, add "C:\Program Files\Rational\common" to you Path variable.

[Go To Top]

 

Start-up Issues

If you encounter problems starting Rational Rose RealTime, look at the Task Bar and use the Task Manager to see if there are any running copies of Rational Rose RealTime. Terminating all running copies allows new copies of the tool to start properly.

More than one copy of Rational Rose RealTime can run at the same time; however, if startup problems exist, find and terminate any runaway processes.

Note: On UNIX, if a Rational Rose RealTime version 2003.06.00 (version 6.5) exits unexpectedly, prior to starting an earlier version of Rational Rose RealTime (2002.05.xx), we strongly recommend that you delete the windows directory in  your $HOME directory. If you do not delete the windows directory, printing will fail.

Toolset Freezes on Startup

Under certain configurations, when starting Rational Rose RealTime on Solaris and displaying to a Hummingbird Exceed X-server, the "Welcome to ..." window appears momentarily, and then disappears. After this, the main application GUI is locked out and freezes.

The workaround is as follows:

1. Kill the Rational Rose RealTime process.
2. Edit the RoseRT.ini file in the ~/.registry.2003.06.00 directory and change ShowStartupDialog=Yes to ShowStartupDialog=No.
3. Run RoseRT -cleanup.
4. Run RoseRT.

[Go To Top]

Virus Scanning Applications Affect Startup and Shutdown

On startup or shutdown, virus scanning applications, such as McAfee VirusScan and Trend, will scan the RoseRT.ini file many times, causing a very slow startup or shutdown. To enable a much faster startup and shutdown, exclude the file RoseRT.ini from your virus scanning software.

Uninstall Issues

Occasionally, files are left behind after an uninstall. For example, if a model was saved in one of the Rational Rose RealTime subdirectories, the subdirectory and its parent directories will not be removed. To return your system to a clean state, you must manually remove these directories. 

Note: After you uninstall, your license files will remain in your /common directory, for example, C:/Program Files/Rational/Common. We strongly recommend that you copy the license files to another secure location before deleting the /common directory.

[Go To Top]

Connexis

Running  Connexis Where the Board has Multiple IP Addresses

Connexis may not function as expected when a board has multiple IP addresses (a multi-homed situation). For example, you may have a server (server A) that is accessible by a client (client B) through two IP addresses (address 1 and address 2). If client B assumes that server A is at address 1, based on the address specified in their registerSAP call, the AYA audit message will be sent to that address. When the IAA reply returns from client B, the UDP identifies the IP address of the sender if the IP address is different from the one originally sent. Because  the sender was at address 2 instead of address 1, you may interpret from this information  that client B never received a reply to the AYA for address 1, although the connection continues to be good. Also, with respect to the locator, the published services are only known by one IP address. This means that the client using the locator cannot send to an alternate IP address.

CRM - CRM supports a full address in the same format as used in the registration string. It also supports the specification of a port number. The IP address is determined at startup to be the primary IP address of the board. If no address is supplied, the primary IP address and any free port is used as the listening address.

CDM - When the DCS starts, it calls into the RTS to obtain the IP address for the node that it is running on. This information is stored by the DCS, and it is used at a later time. The CDM transport uses this information, including situations when the user specifies different data using the CNXep parameter. On single-homed machines, this is not an issue because they will be the same (for example, only one IP address is available). However, on multi-homed machines, you may want to use the network connection that was not returned by the call to the RTS.

[Go To Top]

UNIX-Specific

Printing on UNIX

If you click the Print icon in the Toolbar, the Print Topics dialog appears with two options: Print the selected topic and Print the selected heading and all subtopics. Because the Print the selected heading and all subtopics option is not available, it is not possible to print all of the subtopics on Solaris.

 Browser Requirements for UNIX

The Installation Guide, Rational Rose RealTime indicates that the browser requirement for UNIX is Netscape 7.0. This is not correct. The correct browser requirements for UNIX are Netscape 4.78 and Netscape 4.8.

Troubleshooting when the Toolset Freezes on UNIX

In the unlikely event that the  Rational Rose RealTime toolset freezes on UNIX,  the toolset does not respond to user input, or the window will not refresh).

To recover from a toolset freeze:

1. Run /usr/proc/bin/pstack [Rose RealTime pid] > [outfile].
2. Run /bin/truss -o [output file] -p [Rose RealTime pid] for 15 seconds.
3. Kill the Rational Rose RealTime process:

Run kill -SEGV [Rose RealTime pid]

You are also prompted for the following:

• Information on how to reproduce this problem.
• To run a resource cleanup utility on your session.
• To indicate whether you want to be contacted by Rational Customer Service.

If you answer Yes to "Would you like to be contacted by Rational Customer Service", a Rational Customer Support engineer will contact you shortly. You are also prompted to provide the information you gathered in steps 1 through 6.

4. Click Help > About Rational Rose RealTime and obtain the Rational Rose RealTime build number.
5. Attempt to reproduce the problem:

• If you can reproduce the steps that caused the toolset freeze, take note of these steps.
• If you are unable to reproduce the steps that caused the toolset freeze, any information you can provide on what activities you were doing at the time of the toolset freeze will be helpful to our investigation.

6. If you use ClearCase, were you in a ClearCase view at the time of the toolset freeze and what version of ClearCase are you currently using?

Forward all of the above information to Rational Customer Service (for contact information, see Rational Customer Support). Ensure that you include "Rose RealTime" in the subject of your email.

[Go To Top]

Rational Rose RealTime Crashes when Debugging Using Tornado 2.2 on UNIX

If you are using debugger integration with Tornado 2.2, as Rational Rose RealTime loads a component instance it will crash. To resolve this problem, go to the WindRiver web site (www.windriver.com) and download the latest patch for Tornado 2.2 that includes an update to the file libwtxapi.so.

Refresh Problems with Exceed

Occasionally, the screen does not refresh completely when running the UNIX version of Rational Rose RealTime on a PC using Hummingbird Exceed.

To change your Exceed settings:

1. Start Xconfig.
2. Open the Performance dialog.
3. Use these settings:

Save Unders = No
Maximum Backing Store = When Mapped
Default Backing Store = None
Minimum Backing Store = None.

Using Hummingbird Exceed 7.1 on a Computer Running Windows Applications and Rational Rose RealTime

If you use a computer running Microsoft Windows XP Pro, Microsoft Office XP Service Pack 1, Microsoft Word (selected as editor for Microsoft Outlook), while Microsoft Outlook is open, if you start Rational Rose RealTime from a Hummingbird Exceed (version 7.1) window, shortly after launching Rational Rose RealTime, Microsoft Outlook, Microsoft Word, and spoolsv.exe CPU activity increases to near 100%. These applications remain at that level for approximately one minute after Rational Rose RealTime closes. Your Rational Rose RealTime session will function normally. However, Microsoft Outlook and any currently open Microsoft Word documents become unusable.

[Go To Top]

Specifying a Location or File Name Containing Spaces (UNIX)

To properly process a location or file name containing one or more spaces, the command line must be properly quoted. You need two levels of quotation marks: the first set of quotation marks (’) wraps the second ("). Specifying this type of quotation marks ensures that the RoseRT script will not interpret the space character, and that it will pass the file name (including space characters) as a single argument to the RoseRT executable.

For example, given the following path and file name:

Test with Spaces/Model with spaces.rtmdl

you would invoke the toolset using the following command:

RoseRT '"Test with Spaces/Model with spaces.rtmdl"'

The file name parameter is quoted as follows:

<open single quote><open double quote> path/filename<close double quote><close single quote>

You must use the quotation marks as described. If you use double quotation marks to wrap the single quotation marks, the string for the file name is processed as a command and it will produce errors.

Starting vi as an External Editor from Rational Rose RealTime

While using Rational Rose RealTime on Solaris version 2.9, if you perform an action that starts the vi editor (the vi editor starts in a separate xterm window), clicking on the "X" on this window displays the following message:

This will terminate you X client session.

If you click OK, the vi xterm window does not close.

[Go To Top]

Unable to Open Some Links in the Online Help

Some links to multimedia content do not work on UNIX. Where possible, an alternative method for opening certain files is included in the online help.

Exceptions When Using Configuration Management in Rational Rose RealTime

If you encounter an exception when working with models under source control on UNIX, your temporary file,  /var/tmp, is likely full.

Case Sensitivity within Paths

The UNIX temporary directory name is translated to lower case. If you set the environment variable TEMP, ensure that the path name is all lower case; otherwise, the directory will not be found. This will cause problems when you open the online Help.

Window Order Policy

When using the CDE window manager, to ensure that the proper Secondary and Transient window policy is in effect, in .Xdefaults, set the following environment variable:

Dtwm*secondariesOnTop: True

Setting this variable to True ensures that an opened secondary window in Rational Rose RealTime for UNIX (such as an external editing window) does not appear behind the main primary window. Since the secondary window is the active window, you may be unable to regain focus of this secondary window.

When using CDE as your XWindow manager, the Allow Primary Windows on Top and Raise Windows When Made Active options are enabled by default. These options should be disabled when setting the Dtwm*secondariesOnTop option to True.

[Go To Top]

Non-GUI-based External Editors

On UNIX, the toolset will freeze if you specified /bin/vi as the external editor and you attempt to launch the external editor from the Code edit window. If you use a non-GUI-based external editor, to ensure that the editor has a terminal (tty) to display to, specify xterm -e /bin/vi.

Setting the Stack Space Limit

Some operations with large models may require a value larger than 32MB to be set manually. If your UNIX administrator set a hard limit on the stack size, you can set a higher limit by using the limit command in csh, or the ulimit command in sh or ksh. Some operations with large models may require a value larger than 32MB to be set manually.

[Go To Top]

Windows-Specific

Using Rational Rose RealTime on Windows XP Pro Configurations

Before installing Rational Rose RealTime on any Windows XP Pro configuration, ensure that you have service pack 1 installed. The Installation Guide, Rational Rose RealTime is incorrect because it indicates that you can install Rational Rose RealTime on Windows XP Pro and Windows XP Pro with service pack 1.

Using Rational Rose RealTime without Appropriate Privileges

To run Rational Rose RealTime on Windows 2000, you must log on with local Administrator or Power User privileges. You will encounter problems running Rational Rose RealTime 2003.06.00 on Windows 2000 if you log on as a user without local  Administrator or Power User privileges. The types of problems include the following:

• When opening Rational Rose RealTime, you may see the error message, "Failed to Update the System Registry. Try using REGEDIT."
• The configuration of the Add-in manager cannot be restored.
• The two menu items Add Class Dependencies and Component Wizard are missing from the Build menu.
• When creating a component, you are not able to define the Environment in the Component Specification for the C++ TargetRTS.
• When selecting Rebuild from the Build menu, or clicking the Build tool from the Toolbar, there is no activity.
• After selecting Run from the Build menu, then clicking Yes to select Build the component, you will receive the error message Operation not allowed.
• When clicking Help > About, there is no Version or Company information.
• You will not be allowed to set a Top Capsule in the Component Specification dialog.

[Go To Top]

Build Dependencies on Case-Insensitive File Systems

During a build, Rational Rose RealTime detects and records build dependencies for comparison during subsequent builds. This is done to facilitate build-avoidance by only regenerating or recompiling targets when a build dependency changes. These build dependencies preserve the case of the file names involved, including situations when the underlying file system (for example, NTFS) is case-insensitive. This may cause problems when using names that are distinct within the toolset, and distinct on case-sensitive file systems, but indistinct on case-insensitive file systems. In most cases, the toolset or code-generator will identify and avoid or warn against potential case-insensitive name collisions.

However, some case-insensitive file name collisions cannot be detected. For example, if a component is renamed to "myComponent" to "MyComponent"), a build may incorrectly reuse all previous build results, since the underlying build dependencies will be indistinct according to the file system.

We recommend that you use case-sensitive file-systems wherever possible, and avoid case-insensitive name collisions when you create or rename classes, components or controllable units.

File Association for Compiled Scripts

On Windows NT,  Rational Rose RealTime does not install a file association for compiled scripts (.ebx). This means that compiled script file cannot automatically run by double-clicking on the file from Windows Explorer.

[Go To Top]

Windows CE GetSystemTime() Function Does Not Return Milliseconds

Some Windows CE targets do not return milliseconds in the GetSystemTime() call. This will cause the resolution of the clock, which is used for timers, to be 1 second. If milliseconds timers are required, you must modify the getclock.cc function  to use GetTickCount().

For example, in the getlock.cc file in the directory $RTS_HOME/src/target/WINCE/RTTimerspec/getclock.cc, you will change the GetSystemTime() call and replace it with GetTickCount() as follows:

#include <RTDiag.h>
#include <RTTimespec.h>
#include <windows.h>

void RTTimespec::getclock( RTTimespec & ts )
{
DWORD ticks = GetTickCount();

ts.tv_sec = ( (long)ticks / 1000L );
ts.tv_nsec = 1000000L * ( (long)ticks % 1000L );
}

Note: GetTickCount() is the system uptime and will rap around after 49.7 days. For systems that are up for longer, a combination of GetSystemTime() and GetTickCount() could be used to gain the desired length and resolution of clock time. This implementation will be system dependant.

[Go To Top]

Symbolic Links with TargetRTS

When using LynxOS 3.1.0, do not install Visual Lynx 3.1.0 for Windows NT on a network (NFS) disk. It should only be installed on a local NTFS drive; otherwise, symbolic links to some include directories will not work properly. This will cause compilation errors if you re-compile the TargetRTS.

If you installed Visual Lynx 3.1.0 on a network disk, and if you see compilation errors stating that the include directories netinet/in.h or net/if.h are not found, locate the net and netinet entries in the following directory:

$LYNX_HOME/usr/lynx/3.1.0/ppc/usr/include

If these entries are text files containing the following text: !<symlink>bsd, rename these files, create new symbolic links called 'net' and 'netinet', and have both of them point to the directory called bsd.

[Go To Top]

Spaces in Directory Names

To allow the use of cross-compilers that do not allow spaces in the path names, use the subst command and map a drive to the value of %ROSERT_HOME% after the installation. For example, if you wish to use the K: drive, and your Rational Rose RealTime installation directory is:

ROSERT_HOME=C:\Program Files\Rational\Rose RealTime

You must map this directory to the drive by running the following commands from a console window:

subst K: "%ROSERT_HOME%"
set ROSERT_HOME=K:

Spaces in directory names can cause problems with the following "operating system.compiler library set.development platform:" systems:

• OSE411T.ppc603-Diab-4.3f.NT4
• VRTX4T.ppc603-Microtec-1.4.NT40
• TORNADO2T.ppc630-GreenVX-1.8.9.NT40
• TORNADO2T.ppc630-GreenVX-2.0.NT40
• TORNADO2T.m68040-cygnus-2.7.2-960126.NT40
• TORNADO2T.ppc-cygnus-2.7.2-960126.NT40
• TORNADO2T.ppc860-cygnus-2.7.2-960126.NT40

For Tornado configurations, you should also use the substituted drive to point to the load script directory when running Target Observability.

On the Detail tab of the Processor Specification dialog, ensure that the Load Script path does not contain any spaces. If spaces are present, when attempting to load the executable in Basic or Debugger-Tornado2 modes, you will receive the error message "Unable to Execute". This does not occur when loading the executable in Manual mode.

Note: Spaces in directory names can also cause problems with ClearMake.

[Go To Top]

Limitations

Limits on the Number of Open Windows

GDI handles are required to create graphic objects (such as windows, menus, cursors, and bitmaps). Opening windows consumes handles. We recommend that you open a reasonable number of windows. This means that on Windows platforms, do not to exceed 200 open windows at any given time.

Limitations in the Specification History List

The following limitations apply to items in the Specification History list:

• If an RTS object is "locked", it will not be loaded into the Specification History window with the workspace the next time model is opened.
• RTS objects are visible in the Specification History window after RTS shutdown. However, if you attempt to open this object with no RTS running, the object is removed from the Specification History list (this also occurs when using the Refresh menu item).

[Go To Top]

Online Help

Navigating Through the Online Help

You can either select a topic in the Contents tab or click the Next or Previous buttons, and the topic appears in the main window. As you click Previous, although the previous topic appears in the main window, the incorrect topic may be highlighted in the Contents tab. However, this does not affect the navigation to the selected topic.

Viewing Animated Demonstrations

Rational Rose RealTime includes animated demonstrations of various topics. To see the current list of animated demonstrations, from the Help menu, click Contents. The Rational Rose RealTime Online Help Start Page appears. Click the Animated Demonstrations button for your specific platform.

Viewlets can be viewed on a number of platforms. However, your browser must have Java 1.1 and JavaScript support to play a Viewlet. Additionally, Java must be enabled in your browser.

It is normal for some larger Viewlets to take 10 to 15 seconds to load. Ensure that your browser cache is not disabled; otherwise, some Viewlets may take longer to load.

If launching a Viewlet takes a very long time, or a gray box displays instead of running a Viewlet, try running the Viewlet in your browser by doing the following:

1. In your browser, navigate to the <ROSERT_HOME >/Help directory.
2. Select rosert_watch_demos.htm.
3. Select a Viewlet to run that demonstration.

[Go To Top]

Problems Accessing Rational Rose Help while Running Rational Rose RealTime on Windows

Running Rational Rose RealTime and Rational Rose at the same time may cause Rational Rose not to access its help files. When accessing the online Help for the Rational Rose RealTime toolset, Rational Rose RealTime temporarily replaces a registry key value installed by Rational Rose. This registry key is located in [HKEY_LOCAL_MACHINE\Software\Rational Software\Rose] and is named HelpFileDir. When the toolset starts, it substitutes this key’s value for its own Help directory. The value installed by the Rational Rose installation program is backed up and restored when the last instance of the running toolset exits.

Workaround

You can disable this behavior by setting the value of the key located in [HKEY_LOCAL_MACHINE\Software\Rational Software\Rose RealTime\6.5] whose name is ReplaceRoseHelpDir to No.

Using Context Sensitive Help May Cause Message to Display

If you have version 4.7.3 of the HTML Help compiler installed on your computer, you will receive the following message:

The window name "Default" passed to HH_GET_WIN_TYPE has not been specified.

To solve this problem, ensure that you install  version 4.7.4.

[Go To Top]

Maintaining a Single Favorites List

The Rational Rose RealTime online Help is modularized. If you select Add on the Favorites tab to add current help topic to your favorites list, this entry will only appear in the favorites list for that component of the online Help.

To maintain a single list of favorite help topics:

1. Use the Search or Index tabs to find the desired online help topic.
2. Click the Locate button in the Toolbar to see where this help topic appears in the Contents tab.
3. Close the online help.
4. Open the online help, using Help > Contents.
5. From the Contents tab only, find the help topic.
6. Click the Favorites tab.
7. Click Add.

Using the Index Tab in the Online Help

When using the Rational Rose RealTime online Help system, if the Index tab has no index entries, close the online Help, and then open the help again. 

[Go To Top]

Toolset (General Issues)

Loading a Workspace may Cause Default Color Settings to Permanently Change

When opening a model and its corresponding workspace, if the workspace specifies a different color scheme for the Line and Fill colors (the third and fourth color boxes in the Custom colors area on the Color dialog box), it will cause the default color settings in the file RoseRT.ini to permanently change.  

To restore the default colors:

1. Click Tools > Options.

2. Click the Font/Colors tab.

3. In the Custom Colors area, set the following:

• For Line Color, select burgundy.

• For Fill color, select light yellow.

Alternatively, you can choose not to open the workspace when opening a model.

Do Not Use $& When Defining a PathMap

Do no use $& in your PathMap definitions. If you define a PathMap that includes $&, you will receive a build error similar to the following:

Error: INTERNAL ERROR: File I/O error while trying to open $&/ComponentView.rtcmppkg

Use Caution When Modifying OutPutDirectory

Do not prepend OutputDirectory if ExecutableName appears to be an absolute path.

[Go To Top]

Using Rational Rose RealTime on Non-English Installations Causes Unreadable Font When Viewing Generated Code

When using Rational Rose RealTime on non-English installations, if the font specified is not available, the default font is mapped to an equivalent that is unreadable. To resolve this problem, click Tools > Options, click the Fonts tab, and then select another font.

Unable to use Parameters with the cm_getcaps Script

The cm_getcaps script returns a set of capabilities supported by a source control system. The Rational Rose RealTime toolset does not implement the Parameters button for this operation. This means that you cannot specify any parameters for the UnCheckout operation specified for cm_getcaps scripting.

Problems Compiling Java Models

If you have QuickTime for Java installed, you may encounter problems when compiling your Java models because QuickTime for Java embeds double quotation marks in CLASSPATH. If you remove the double quotation marks, Rational Rose RealTime for Java will compile your models. 

If your CLASSPATH is too long, you will receive the error message "Unable to execute."

[Go To Top]

Problems to Connecting to a Target

If you receive the message "Unable to connect to target" when attempting to connect to a target (both host and embedded), change the value for the Connect Delay box on the Component Instance Specification dialog by increasing the value by two or more seconds.

Using Sequence Diagrams

There are a few conditions under which a Sequence Diagram will incorrectly draw messages and FOCs. If a message or FOC appears to be drawn incorrectly, select the message (or the Message that starts the FOC) and, using the center re-orient handle, move the message slightly. Moving the message causes the Sequence Diagram to recalculate the correct display values for that message.

[Go To Top]

Using the Debugger-xxgdb Tool and Running your Component Instance

When using the xxgdb tool, to enable the breakpoints in gdb, run your component instance, add any breakpoints, and then restart it.

Use of C and C++ Add-ins

You cannot use the C and C++ Add-ins at the same time in Rational Rose RealTime.

[Go To Top]

Code Generator Runs Out of Memory When Generating Very Large Models

When you attempt to generate a very large model, the code generator may run out of memory. To improve memory usage when generating very large models, we recommend that you control all the controllable elements in your model as individual units.

To control elements in your model:

1. In the Model View tab in the browser, select the model.
2. Right-click and click either File > Control Units  or File > Control Child Units.
3. When prompted to control all child units recursively, click Yes. 
4. Click Yes on the subsequent confirmation dialog.

For details on controlled units, see the topic, "What is a controllable Element?" in the Guide to Team Development, Rational Rose RealTime.

[Go To Top]

Using the Get and Set Methods in the Attribute and Operation Tools

In the Attribute and Operations tools, you can de-select the Get method and Set method boxes. 

To prevent the deletion of modified code for the Get and Set methods:

1. Open the Specification dialog for an Attribute or Operation.
2. Click the General tab.
3. In the Documentation box, delete the following text:

//GENERATED BY ATTRIBUTE TOOL

or

//GENERATED BY OPERATION TOOL

Deleting this text prevents the deletion of the modifications you made to the Get or Set methods if you de-selected either the Get method or Set method options.

Web Publisher Applet Does Not Load Properly

When using Microsoft Internet Explorer with Microsoft JIT, the Documentation window and the Scroll Bar will not appear the first time you start Rational Rose RealTime. Also, if you use JDK version 1.3.3, the Scroll Bar will not appear.

If you perform a refresh, the Documentation window and the Scroll Bar will appear. If you use appletviewer on JDK version 1.2.2, the Documentation window and the Scroll Bar will appear.

Using the Frameworks Dialog

If you create a framework whose name comes alphabetically before the Empty, RTC, and RTC++, by default, on the Frameworks dialog the highlighted icon is the RTC++ icon, but the text in the Description tab is for the RTC framework. If you click Open, the RTC framework is loaded.

Workaround: Always use your mouse to select a framework, and then click Open.

[Go To Top]

Scoping Descriptors for Nested Classes

If you have the following externally defined classes:

class ExternalClassA
{
   public:
   int x;
   class ExternalClassB
{
public:
int y;
}

}

and model them in Rational Rose RealTime by ExternalClassA and a nested ExternalClassB. For both, generateClass is not selected and generateDescriptor is selected. The type descriptor for ExternalClassB is not generated.

The descriptor for the nested class must be scoped within the top-level class because the nested class is not necessarily public. Since the top-level class is not generated, the descriptor for the nested class (which must be part of the declaration of top-level class), cannot be generated.

[Go To Top]

No Codesync Support for Java

Although codesync options may appear in the menus, Rational Rose RealTime does not support codesync for Java.

Using the GetSelected Functions

In Rational Rose RealTime, the browser selections only apply when the browser window has focus (Rational Rose RealTime uses a different definition of what is selected than Rational Rose). In all other cases, the selection is from the active diagram window (if any). When running a script, you are in the script window; the browser window does not have focus. To return focus to the browser window, you can add a delay to your script.

The GetSelected functions (for example, RoseRTApp.CurrentModel.GetSelectedClasses) only find the selected elements in the model browser if the model browser is active. This means that if you select elements in the browser, then run your script (from the Script Editor, or the Tools menu), the model browser is no longer active (the selected elements are gray, not blue) and these functions will not find anything.

For example, if you open the following script in Rational Rose 2000, select your classes in the model browser, then run the script, it will work.

Sub Main ()

Dim theSelectedClasses As ClassCollection

Viewport.Open
Viewport.Clear

Print "Selected classes from model browser:"
Set theSelectedClasses = RoseApp.CurrentModel.GetSelectedClasses()
If theSelectedClasses.Count > 0 Then

For i = 1 To theSelectedClasses.Count

Print "Class name: "; theSelectedClasses.GetAt(i).Name

Next i

Else

Print " No classes have been selected "

End If

End Sub

However, this script will not work in Rational Rose RealTime. It will only work in Rational Rose RealTime if you make the model browser active. For example, if you add the sleep line to the following script, run the script, select the classes in the model browser, and wait 5 seconds, it will find the selected classes.

Sub Main ()

Dim theSelectedClasses As RoseRT.ClassCollection

Viewport.Open
Viewport.Clear
Sleep(5000)

Print "Selected classes from model browser:"
Set theSelectedClasses = RoseRTApp.CurrentModel.GetSelectedClasses()
If theSelectedClasses.Count > 0 Then

For i = 1 To theSelectedClasses.Count

Print "Class name: "; theSelectedClasses.GetAt(i).Name

Next i

Else

Print " No classes have been selected "

End If

End Sub

[Go To Top]

Using the Find Command May Return Too Many Results

When using the Find command, the results returned may be more than expected. We recommend that you refine your searches whenever possible.

No Support for automatic unwired port registration for Java

In Rational Rose RealTime for Java, rtBound messages do not work because there is no support for unwired port registration.

Error Occurs When Printing a Diagram

If you use an 8 bit, 256 color terminal, you may receive the following error message when you print a diagram from your model if the graphics use the default gray shading:

Error Writing to print file <file_name>.

To print diagrams within your models, you must redefine the default fill color. 

To redefine your fill color:

1. From the Tools menu, select Options.
2. Click the Font/Color tab.
3. Click Fill Color.
4. Select another color other than the default gray.

[Go To Top]

ROSERT_NO_FEEDBACK - Prompting for Information When an Exception Occurs 

On Windows hosted versions of Rational Rose RealTime, a dialog appears after an exception occurs allowing you to specify information about the steps leading up to the exception, your current system configuration, and whether you would like to be contacted. 

On UNIX hosted versions of Rational Rose RealTime, a script is executed after an exception occurs, which has the same functionality as that provided by Windows hosted versions. Whether you specify the requested information or decide not to specify any information, the script runs RoseRT -cleanup. 

Note: After any Rational Rose RealTime UNIX exception, you must run RoseRT -cleanup to ensure that any remaining crash artifacts are removed. 

On UNIX hosted versions, if you do not want to be prompted for information after exceptions, set the environment variable ROSERT_NO_FEEDBACK to True. When this variable is set, RoseRT -cleanup will continue to run after an exception. Later, if you want to be prompted to provide feedback, set the variable ROSERT_NO_FEEDBACK to False. 

ROSERT_TORNADO_TIMEOUT - Modifying the Default Timeout for wtx Commands

By default, when downloading a VxWorks module to a target, the timeout value for wtx commands is set to 30 seconds (ROSERT_TORNADO_TIMEOUT=30000). This default value may not be sufficient when downloading large modules, or when using a slow network. You may receive an error if the timeout value is exceeded. Use this variable to increase the timeout period, if required.

 

[Go To Top]