Rational Rose 2003.06.15 CORBA Hot Fix6 Release Notes
September 2005

© Copyright IBM Corporation.  1992, 2005.  All Rights Reserved.
Any reproduction or distribution of this work is expressly prohibited without the prior written consent of IBM Corporation.

Scope
This Hot Fix updates the Rose release as described below.
Hardware/Software Information
Hardware / Software requirements for this Hot Fix are the same as those described in the installation Guide for Suites v2003.06.00.
Getting Started
In addition to the instructions provided in the "Getting Started" section of the Rose 2003.06.00 Release Notes, please review the following information new in this Hot Fix for Rose 2003.06.15:
Installation Information
Prerequisite
Rose 2003.06.15 must be installed, in order to install this Hot Fix.
Licensing
No licensing changes are required when installing this Hot Fix.
Installation Instructions
Note:  [Release_Location] is the Rational Products installation directory.  This is typically "C:\Program Files\Rational".
1.	Rose 2003.06.15 must be installed prior to installing this Hot Fix.
2.	Backup (rename) the files “Files Updated in this Hot Fix”.
3.	Place the following files in a temporary directory: 
o	ROSE_2003r5_CORBA_HotFix6_09.16.2005.exe
o	install_2003r5_CORBA_HotFix6_09.16.2005.bat
4.	Run install_2003r5_CORBA_HotFix6_09.16.2005.bat 
The following preliminary information will display – press Enter to continue:
========================================
Rose 2003.06.15 CORBA Hot Fix6
Product:  Rose Enterprise
Installs and Registers
Rose 2003.06.15 CORBA Hot Fix6
%TEMP%\Rose_2003r5_CORBA_HOTFIX6_ERRORLOG.log
will include a listing
of any errors encountered while
installing this Hot Fix.
Contact Rational Technical Support if
you encounter any Installation Errors.
========================================
Press any key to continue . . .
Installing Rose 2003.06.15 CORBA Hotfix6…
•	The “WinZip Self_Extractor” dialog will display.  Select “Unzip”.

You will see the following message box, Select “OK” and then Select “Close” in the original “WinZip Self_Extractor” dialog (see, above).

In the Command Prompt Window you will see a messages and a message box (see below) as the CORBA Add-In included in this Hot Fix is registered.  Select “OK” to the message box.
Registering Rose CORBA Add-In…

•	You will then see a message in the Command Prompt Window indicating that the Hot Fix was successfully installed:
Removing %TEMP%\ Rose_2003r5_CORBA_HOTFIX6_ERRORLOG.log
=========================================
Rose 2003.06.15 CORBA Hot Fix6
Successfully Installed
=========================================
Press any key to continue . . .
If you encounter any errors during the installation of this Hot Fix, refer to the error log:  
%TEMP%\Rose_2003r5_CORBA_HOTFIX6_ERRORLOG.log that will include a listing of the errors.  If no errors were encountered, this file will not exist.
Product Documentation
Documentation for Rational Rose is available on-line at http://www.rational.com/support/products/rose.jsp
Compatibility Issues
This section describes any compatibility issues that could arise from use of this Hot Fix.
With Rational Products
This Hot Fix does not introduce any compatibility issues with other Rational products.
With Third-Party Products
This Hot Fix does not introduce any known compatibility issues with third-party products.
Defects and Changes
CORBA Add-In Defects Fixed & Enhancements in this Hot Fix (see “Enhancement Instructions & Additional Information” for complete descriptions, below)
Defect / APAR	Description	
RATLC001099444 / IC47396	Rose CORBA generates code with class type as CORBAStruct, which cannot be reverse engineered. 
This issue was due to the fact that forward declarations generated with a module for the CORBA elements were not correct.  For struct stereotypes also interface forward declarations were generated.
Now, the forward declarations are generated within a module only for the CORBA elements such as interfaces and valuetypes.	
Enhancement Instructions & Additional Information
Files Updated by this Hot Fix
[Release_Location]\rose\ CORBA\corba_addin.dll

Note:  
[Release_Location] is the Rational Products installation directory.  This is typically "C:\Program Files\Rational".
Additional Information
Contacting Rational Customer Support
Contacting Rational Customer Support The IBM software support Internet site provides you with self-help resources and electronic problem submission.  The IBM Software Support homepage can be found at www.ibm.com/software/support. 
Voice Support is available to all current contract holders via a telephone number in your country (where available). For specific country phone numbers, please refer to the IBM Software Support Handbook, Appendix B: Contact Information, found at www.ibm.com/software/support.