Power7 High-End Power Subsystem Firmware

04/16/2015
 

• Merely refreshing the BPC image - no functional changes. New BPC FSP image is required for CEC FSP firmware code update process to work correctly.

01/09/2015
 

• A security problem was fixed in OpenSSL for padding-oracle attacks known as Padding Oracle On Downgraded Legacy Encryption (POODLE). This attack allows a man-in-the-middle attacker to obtain a plain text version of the encrypted session data. The Common Vulnerabilities and Exposures issue number is CVE-2014-3566. The service processor POODLE fix is based on a selective disablement of SSLv3 using the Advanced System Management Interface (ASMI) "System Configuration/Security Configuration" menu options. The Security Configuration options of "nist_sp800_131a", "nist_compat", and "legacy" for affects the disablement SSLv3 and determines the level of protection from POODLE. The management console also requires a POODLE fix for APAR MB03867(FIX FOR CVE-2014-3566 FOR HMC V7 R7.9.0 SP1 with PTF MH01484) to eliminate all vulnerability to POODLE and allow use of option 1 "nist_sp800_131a" as shown below--
  • 1)nist_sp800_131a (SSlv3 disabled)- This highest level of security protection does not allow service processor clients to connect using SSLv3, thereby eliminating any possibility of a POODLE attack. All clients must be capable of using TLS v1.2 to make the secured connections to the service processor to use this option. This requires the management console be at a minimum level that has a poodle fix such as HMC V7 R7.9.0 SP1 with POODLE PTF MH01484 or HMC V7 R7.8.0 SP2 with POODLE PTF MH01432 when it becomes available.
  • 2)nist_compat (default mode - SSLv3 enabled for HMC)- This medium level of security protection disables SSLv3 (TLS v1.2 must be used instead) for the web browser sessions to ASMI and for the CIM clients and assures them of POODLE-free connections. But the older management consoles are allowed to use SSLv3 to connect to the service processor. This is intended to allow non-POODLE compliant HMC levels to be able to connect to the CEC servers until they can be planned and upgraded to the POODLE compliant HMC levels. Running a non-POODLE compliant HMC to a service processor in this default mode will prevent the ASMI-proxy sessions from the HMC from connecting as these proxy sessions require SSLv3 support in ASMI.
  • 3) legacy (SSLv3 enabled)- This basic level of security protection enables SSLv3 for all service processor client connection. It relies on all clients being at POODLE fix compliant levels to provide full POODLE protection using the TLS Fallback Signaling Cipher Suite Value (TLS_FALLBACK_SCSV) to prevent fallback to vulnerable SSLv3 connections. This legacy option is intended for customer sites on protected internal networks that have a large investment in older hardware that need SSLv3 to make browser and HMC connections to the service processor. The level of POODLE protection actually achieved in legacy mode is determined by the percentage of clients that are at the POODLE fix compliant levels.
• A security problem was fixed in OpenSSL for memory leaks that allowed remote attackers to cause a denial of service (out of memory on the service processor). The Common Vulnerabilities and Exposures issue numbers are CVE-2014-3513 and CVE-2014-3567.
• System gets stuck in Low Power Mode for certain Power Line Disturbance events. Fix to take system out of this mode when disturbance recovers.
• Post call home SRC when system is left in Low Power Mode after failed DCA repair
• Detect and report errors on CFAM bus at DCA to reduce length and complications of repair
• Add filtering to BPR firmware to prevent susceptibility to 350V bus noise that can cause erroneous overvoltage induced BPR power off.

06/24/2014
 

• HIPER /Pervasive A security problem was fixed in the OpenSSL (Secure Socket Layer) protocol that allowed clients and servers, via a specially crafted handshake packet, to use weak keying material for communication. A man-in-the-middle attacker could use this flaw to decrypt and modify traffic between the management console and the service processor. The Common Vulnerabilities and Exposures issue number for this problem is CVE-2014-0224.
• HIPER /Pervasive A security problem was fixed in OpenSSL for a buffer overflow in the Datagram Transport Layer Security (DTLS) when handling invalid DTLS packet fragments. This could be used to execute arbitrary code on the service processor. The Common Vulnerabilities and Exposures issue number for this problem is CVE-2014-0195.
• HIPER /Pervasive Multiple security problems were fixed in the way that OpenSSL handled read and write buffers when the SSL_MODE_RELEASE_BUFFERS mode was enabled to prevent denial of service. These could cause the service processor to reset or unexpectedly drop connections to the management console when processing certain SSL commands. The Common Vulnerabilities and Exposures issue numbers for these problems are CVE-2010-5298 and CVE-2014-0198.
• HIPER /Pervasive A security problem was fixed in OpenSSL to prevent a denial of service when handling certain Datagram Transport Layer Security (DTLS) ServerHello requests. A specially crafted DTLS handshake packet could cause the service processor to reset. The Common Vulnerabilities and Exposures issue number for this problem is CVE-2014-0221.
• HIPER /Pervasive A security problem was fixed in OpenSSL to prevent a denial of service by using an exploit of a null pointer de-reference during anonymous Elliptic Curve Diffie Hellman (ECDH) key exchange. A specially crafted handshake packet could cause the service processor to reset. The Common Vulnerabilities and Exposures issue number for this problem is CVE-2014-3470.

01/20/2014
 

• Frame input power information is not correctly returned to the HMC for the second line cord when there are 3 BPRs per BPA
• Fix to no longer recover DCA power for internal hardware resets if CEC node is critical (powered off from fault). This allows normal SRC to be posted to improve servicability.
• Fix location codes used in part callouts for SRCs 1402328C and 1402328B
• Fix to allow servicing of a DCA in a CEC that is already in Low Power Mode if the HMC sends commands to BPA side B
• Fix to prevent erroneous posting of DCA to DCA communication faults during code updates
• Fix to prevent system level power off if a critical CEC node fault independently occurs before or during concurrent BPA service

06/24/2013
 

• Post error code if BPC bypass switch is left in bypass position after service
• Fix cross-power cable's circuit breaker not being opened as part of BPC service when mailbox cable is broken
• Detect and block service of power supplies that have been left in voltage biased down condition
• Allow service procedure to continue if CEC node being serviced for power supply repair is already in Low Power Mode from a prior repair
• Add tests to detect and report a dead voltage level 6 on 5797/5798 I/O drawers
• Fix to prevent erroneous defective planar error posted after power off of 5797/5798 I/O drawer
• Robustness added to various hardware recovery processes

02/26/2013
 

• When a BPA error condition is detected, BPA fan speeds will be raised to a lower setting than the previous firmware level.

11/23/2012
 

• GA Level