Prerequisite: 
Only install the firmware below at the instruction of your service representative, after verifying the hardware either does not require mandatory ECA331, 
or mandatory ECA331 has already been applied.

Steps:
1.  Download save file QMH01364.savf 

2.  Transfer the save file to the IBM i system:  
On the IBM i system:  

	CRTSAVF FILE(QGPL/QMH01364) 

On the PC: 
	ftp systemname
	ftp> bin
	ftp> put QMH01364.savf QGPL/QMH01364 (replace

3.  Once the MH01364 save file has been sent to the system, load it on the system: LODPTF LICPGM(5733907) DEV(*SAVF) RLS(V1R3M0) SAVF(QGPL/QMH01364)

4.  Once MH01364 has been loaded, apply it on the system: APYPTF LICPGM(5733907) RLS(V1R3M0) SELECT(MH01364)

5.  Verify MH01364 has been applied on the system: DSPFMWSTS

6.  Restart the system following your standard procedure(s) or via PWRDWNSYS OPTION(*IMMED) RESTART(*YES)