***********************************************************
***********************************************************
**                                                       **
**  NOTICE:  This Patch has been superseded by patch     **
**  3.7-RCL-0007                                         **
**                                                       **
**  Please use it instead unless otherwise directed.     **
**                                                       **
***********************************************************
***********************************************************


Date:   Dec 1, 2000

Patch:  3.7-RCL-0004

Component:  Tivoli Remote Control SERVER
            
General Description:

   This patch fixes problems related to APARs IY11578 IY11873 IY12058
   IY12999 IY13464 IY13572 IY13612 IY14075 d6263 d6266.
   Patch 3.7-RCL-0002 must be applied before installing this patch.

Problems Fixed in 3.7-RCL-0004:

  Remote Control Controller Windows NT:
  IY11578 : The use of certain keys or key combinations (e.g.
            WindowsKey, Esc, Esc and Ctrl+Esc) may cause any
            subsequent keystroke to be misinterpreted on 
            the target.
  IY13464 : The Esc+Break key combination is not correctly sent to
            the target.
  d6263   : The mouse pointer on the controller is initially set to 
            "busy".
  
  Remote Control Controller Windows 9x:
  IY11578 : The use of certain keys or key combinations (e.g.
            WindowsKey, Esc, Esc and Ctrl+Esc) may cause any
            subsequent keystroke to be misinterpreted on 
            the target.
  IY13464 : The Esc+Break key combination is not correctly sent to
            the target.
  d6263   : The mouse pointer on the controller is initially set to 
            "busy".

  Remote Control Target Windows NT:
  IY11873 : When the "Rule Line" option of the display setup of 
            IBM Personal Communications is active, the "crosshair" 
            cursor is not visible on the controller.
  IY12058 : If any of the Alt, AltGr, Ctrl, or Shift keys are held 
            down on the controller while the RC session is closed via 
            the mouse, the corresponding key appears to remain held 
            down on the target.
  IY12999 : When controlling an NT target configured with the 
            auto-logon feature, a remote logoff performed while
            holding down the Shift key results in the Shift key state
            on the target to remain down. This problem is present
            exclusively on Far East NT systems.
  IY13464 : The Esc+Break key combination is not correctly sent to
            the target.
  IY13572 : The first screenshot on the controller may appear black
            when starting an RC session to an NT/2000 target.
  IY13612 : At the end of the session, the background may not be 
            correctly restored on Windows 2000 machines.
  IY14075 : RCSERV.EXE may experience a null pointer Dr.Watson
            exception on Windows 2000 machines.
  d6266   : Some memory leak may appear after installing patch
            3.7-RCL-0002.
        
  Remote Control Target Windows 9x:
  IY11578 : The use of certain keys or key combinations (e.g.
            WindowsKey, Esc, Esc and Ctrl+Esc) may cause any
            subsequent keystroke to be misinterpreted on 
            the target.
  IY12058 : If any of the Alt, AltGr, Ctrl, or Shift keys are held 
            down on the controller while the RC session is closed via 
            the mouse, the corresponding key appears to remain held 
            down on the target.
    
Required Roles:

  super or install_product to download and install dependencies.
  remote_reboot to reboot the Endpoint.

Architecture(s): Solaris (2.5.1, 2.6 and 2.7), HP-UX (10 and 11),
                 aix4.x, Windows NT (4.0 sp4 or later), Windows 2000,
                 Windows 95-OSR2.5, Windows 98.
  Note: All architectures refer to Y2K compliant Operating Systems

Dependencies: 3.7-RCL-0002

Database changes: none

Files replaced by this Patch:

  Remote Control Server:
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/pctlcf
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/CTL/EQNRSMAI.EXE
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/CTL/EQNRSMGR.DLL
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/EQNRCMAI.EXE
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/EQNRCG40.DLL
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/EQNRCDKY.DLL
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/EQNHOOK.DLL
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/EQNDSS.EXE
       bin/lcf_bundle/bin/w32-ix86/TME/PCREMOTE/TGT/RCSERV.EXE
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/pctlcf
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/CTL/EQNRSMAI.EXE
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/CTL/EQNRSMGR.DLL
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/TGT/EQNRCMAI.EXE
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/TGT/EQNKRN.DLL
       bin/lcf_bundle/bin/win95/TME/PCREMOTE/TGT/EQNDSS.EXE

Patch Contents:

       - This README file
       - An image for this patch

Applying the Patch:

    1)  On a Unix system:

        FTP the 3.7-RCL-0004.tar file to your machine. Place
        the 3.7-RCL-0004.tar file into a scratch directory.
        For the purpose of this release note, assume that
        the symbol $PATCH points to this directory.

        > . \etc\Tivoli\setup_env.sh
        > cd $PATCH
        > tar xvf 3.7-RCL-0004.tar 

    1a) On a Windows NT system:

        FTP the 3.7-RCL-0004.tar file to your machine. Place
        the 3.7-RCL-0004.tar file into a scratch directory.
        For the purpose of this release note, assume that
        the symbol %PATCH% points to this directory.

        > %SystemRoot%\system32\drivers\etc\Tivoli\setup_env
        > X:
          with 'X' being the drive letter where %PATCH% is found
        > cd %PATCH%
        > tar xvf 3.7-RCL-0004.tar

        NOTE:  If you are extracting the tar image on a Windows NT
        system, you will find an executable for tar in the TME 
        installation on Windows NT under bin/w32-ix86/tools/tar.exe.
          
    2)  Follow these steps to install from the Tivoli desktop.
        NOTE: You must have the install_product and super
        authorization roles to successfully install this patch. It
        is advisable to execute and verify a backup of your database
        before installing any patch

        a)  Select the "Install -> Install Patch..." option from the
           "Desktop" menu to display the "Install Patch" dialog.

        b)  Press the "Select Media..." button to display the 
            "File Browser" dialog.

        c)  Enter in the "Path Name:" field  
            $PATCH/37RCL04 where $PATCH is the
            path to the directory where you have expanded the 
            3.7-RCL-0004 tar file. 

        d)  Press the "Set Media & Close" button to return to the 
            "Install Patch" dialog. 
             
        e)  The patch install list now contains the name of the patch:

            Tivoli Remote Control Server 3.7-RCL-0004
            
            Select the patch. 

        f)  Select the clients to install this patch on. 

        g)  Press the "Install" button to install the patch.

Additional Installation Instructions: none
  
Known Problems: none
