IBMUltrium.Win2K.fixlist.txt

(C) Copyright IBM Corporation 2003

Version          Description
-------          -----------

5.0.6.6          Remove event logging for all inquiry overruns
                 Take out MT as a valid destination element for MS cert.
                 Rollback reserve code from V5.0.5.4 (10/17/03)
5.0.6.5          Fix for barcode reading in 3582 (09/3/03)
5.0.6.3          Replace WFM(0) following a write only (08/01/03)
5.0.6.2          Remove WriteFilemarks(0) from Read Position (07/21/03)
5.0.6.1          Fix for open-close-open sequence (07/10/03)
5.0.5.9          Make exclusivity optional (TSM) (7/02/03)
5.0.5.7          Set skip_sn to true for 3581 (6/23/03)
5.0.5.5          Support for 16-frame 3584 Library (5/2/03)
                 Support for 3582 and 3583 with Ultrium Gen I drives
5.0.5.4          Re-reserve on bus reset (4/8/03)
                 Support for 3582 and 3583 with Ultrium Gen II drives
5.0.5.3          Change default LTO block size to 64K (3/6/03)
5.0.5.1          Allow multiple open file handles from same host; retain auto-reserve/release (3/3/03)
5.0.4.9          "Ultrium" now appears in RSM interface (2/20/03)
5.0.4.7          Update for TSM, Enhance NTUTIL to include Xinquiry (1/8/03)
5.0.4.5          Change to LogSense to include header information (12/6/02)
5.0.4.1          Add new changer IOCTLS for compatibility with TSM (9/25/02)
5.0.3.5          Allow access to Backup operators, support for Ultrium Gen 2 (7/30/02)
5.0.3.2a         Repackage of 5.0.3.2 with latest Ntutil and docs. (6/6/02)
5.0.3.2          Enabled RES for large libraries, fixed PNP and read capacity bugs (4/26/02)
5.0.3.1          Updated timeouts for 3590H and Ultrium
                 Added changer ioctls for TSM (2/4/02)
5.0.2.9		 Added support for 3590H
                 Disabled autoblocking for variable-block mode
5.0.2.6		 Added extended drive inventory and updated error logging code
5.0.2.4          Added code to issue implicit reserve/release on open/close
5.0.1.11         Added code to support LP8000 full port driver
5.0.1.10         Added code for VTS on SDG - get LUN from inquiry data for ObtainMTDevice.
5.0.1.9          Mask out event recording for Inquiry data underrun, add 3584L42, add 3590B12/E12
5.0.1.8          Fix for version 5.0.1.5/6/7 - GetMediaParameters() failed on Ultrium Devices
5.0.1.7          Do Not Use
5.0.1.6          VTS testing + capacity/remaining reporting - do not use
5.0.1.5          VTS testing - do not use
5.0.1.4          approved support for Ultrium changers
5.0.1.3          new command timeout values for Ultrium