*******************************************************************************
*                                   README                                    *
*******************************************************************************


Licensed Materials - Property of IBM

5608-ISM
5608-ISX

(C) Copyright International Business Machines Corp. 1990, 2004.
All rights reserved.

US Government Users Restricted Rights - Use, duplication or disclosure 


*******************************************************************************
*                                                                             *
 -------------------------------- ATTENTION ----------------------------------

                This is an interim fix (patch) level 5.3.2.1
     It is intended to provide  relief for critical problems where a local
     circumvention is unavailable.

     A limited amount of testing has been done to verify the fixes.
     Consequently, we strongly recommend  that you perform additional
     testing before putting the package into a production environment.

     These fixes will be tested further by IBM Tivoli Storage Management
     and included in the next Maintenance / PTF Level.

 ----------------------------------------------------------------------------- 
*                                                                             *
*******************************************************************************
 
 
                 For online help visit the ITSM homepage at:
  www.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html
 
 
*******************************************************************************
* Table of Contents                                                           *
*******************************************************************************

About this Readme
Updates for 5.3.2.1
   3592 Generation 2 Support
Installation Information
   AIX Installation
     Migrating from Tivoli Storage Manager Version 5.2
     AIX Installation Instructions
   HP-UX Installation
   Linux Installation
     Supported Linux Environments
     RPM Packages Included
     Server Installation Instructions
     Storage Agent Installation Instructions
     SLES9/pSeries Linux Information
     RHEL4 on x86/EM64T/AMD64 Information
   Sun Solaris Installation
     Updates for Fixpack 5.3.2
     Version 5.3.0 Installation
   Windows Installation
   Installing the Administration Center - New Interface
Licensing
   REGISTER LICENSE on UNIX, Linux and Windows
   REGISTER LICENSE on z/OS
Migration Information
   Changes for Fixpack 5.3.1
     Migration and Password Length Considerations
   Changes for Version 5.3.0
     Migrating to Tivoli Storage Manager Version 5.3 from Previous 
     Versions
     Migration and LAN-free Considerations
Updates for Fixpack 5.3.2
   ACSLS Library Support for HP-UX and Linux
   Automatic Volume Labeling Support for Non-SCSI Libraries
   Formatting Volumes for z/OS LAN-free Operations
     LFVOLUMEFORMATCOUNT Server Option
     FORMAT LFVOLUME Command
   IBM LTO WORM Support
   Multiple Server Entries in the Windows Management Console
     If This Issue Applies to You:
   Prompt for Reboot After Installation of the Server Module
   Removing Tivoli Storage Manager from your Windows System
   SANergy Support Page for Access to the Latest SANergy Levels
   The Tivoli Storage Manager Device Driver (TSMSCSI) and Windows Logo 
   Certification
   Time-out on Formatting Large Disk Volumes on FAT32 Partitions
   Tivoli Storage Manager for Data Retention Name Change
   TSMDLST Update for Windows
     Syntax
     Options
     Examples
     Notes
Updates for Fixpack 5.3.1
   General LTO3 Support
   SANFS Support
   SUN Storage Agent Documentation for addtoinit (APAR IC43928)
   Tivoli Storage Manager 5.3.1 Server Modified to use Centera Version 
   2.3
Updates for Version 5.3.0
   Applying Tivoli Storage Manager Updates for AIX
     Before Applying Maintenance Updates
     Using SMIT to Install Maintenance Updates on AIX(R)
   DATEFORMAT, TIMEFORMAT, and NUMBERFORMAT Server Options
   Default Option and Command Parameter Changes
     Options File (dsmserv.opt) Default Changes
     Command Parameter Changes
   Device Driver Installation Fix for HP-UX
     Claiming a Device
   ENABLE and DISABLE SESSIONS Command Enhancements
   Enhanced Performance of Incremental Export
   New Server Option SANDISCOVERY
   SET WEBAUTHTIMEOUT Command
   Storage Agent Use of Client Option LANFREETCPSERVERADDR
   Support for the QUERY SAN Command and SAN Discovery
     AIX
     Windows 2003 with Emulex Fibre Channel HBA
     Windows 2003 with Qlogic Fibre Channel HBA
     Windows 2000 with IBM LTO Tape Devices
     Windows 2000 with Unsupported SAN Data Gateway
     Linux with IBM Tape Devices
     Sun Solaris with IBM Tape Devices
     Linux for pSeries
     JNI Fibre Channel HBA on Solaris
     ANY Fibre Channel HBA on Linux for zSeries or HP-UX
   Using Shared Memory Communications on Linux
   Windows: Performing a Silent Installation
     Installing the Server
     Installing the Licenses
     Installing the Backup-Archive Client
     Installing the Device Driver
     Installing the Language Packs
     Installing the Storage Agent
     Feature Tables
     Including a Custom Client dsm.opt File
     Installation Troubleshooting
     Performing a Silent Uninstall
   z/OS Device Class Attribute Clarification
Known Limitations
   Updates for Fixpack 5.3.2
     Automatically Restarting a Restore on the Tivoli Storage Manager 
     Client
     Issues Related to Configuring a Tivoli Storage Manager Server in a 
     Windows Cluster
     Using a Disaster Recovery Plan Created on a SUSE Linux Platform
   Updates for Fixpack 5.3.1
     QUERY NODE Limitation
   Updates for Fixpack 5.3.0
     LAN-free Shared Files in a Root Directory for Version 5.3
     Slow Performance Establishing a Connection when Using GB Routers on 
     Linux
   Product Fix History
     APARs Fixed in Level 5.3.2.0
     APARs Fixed in Level 5.3.1.0
     APARs Fixed in Level 5.3.0.0
Notices and Trademarks
   Where to Find Documentation
   Getting Help
     Anonymous FTP Server
   Trademarks


*******************************************************************************
* About this Readme                                                           *
*******************************************************************************

+---- Note! -----------------------------------------------------------+

Before using this information and the product it supports, be sure to
read the general information under Trademarks and Notices.

+----------------------------------------------------------------------+

Updates	 for 5.3.2.1

********************************************************************************
*        3592 Generation 2 Support                                             *
********************************************************************************


3592 generation 2 drives use the same media as generation 1 drives, but they are
able to write in a new format.  This new format has a larger capacity, such that
an uncompressed volume can hold about 500GB and the same ratios apply to
compressed capacity, short tape capacity, etc.  For more details, consult the
3592 generation 2 hardware specifications.

Device Class Information:

In order to utilize this new hardware through TSM, keep in mind that this is 
still an 3592 device. Thus, when defining a devclass that uses 3592 drives, use
the following:
    - devtype=3592
    - format=<DRIVE,3592-2,3592-2C>

    NOTE: The 3592-2 format is uncompressed and the 3592-2C format is
          compressed.

The DEFINE DEVCLASS command for DEVTYPE 3592 now allows the new formats.


   .-FORMAT--=--DRIVE---------.
>--+--------------------------+-
   '-FORMAT--=--+-DRIVE-----+-'  
                +-3592------+
                +-3592C-----+
                +-3592-2----+
                '-3592-2C---'

Note:
  On z/OS the previous default FORMAT for devtype 3592 was 3592C.  To 
continue to use an existing devclass for the generation 2 drives, the 
devclass will need to be updated with a new FORMAT value of DRIVE,
3592-2 or 3592-2C.  
                    

Generational Compatibility support:

It is highly recommended that the two generations of 3592 remain separate and
are not used in a mixed generation environment.  Thus, if possible, upgrade all
drives to 3592 generation 2.  If this is not done, there are potential media
problems that TSM cannot prevent because the generation 1 drive cannot read the
new density.  Therefore, any operation that requires to TSM to verify the
volume's label can fail when these two generations are mixed.  While TSM highly
recommends keeping these two generations separate if not entirely upgrading to
3592 generation 2, TSM recognizes that an interim environment that mixes the 
two generations may be necessary.  In this case you need to setup TSM in one of 
the following configurations:

Open systms mixed drive configuration alternatives:

1. Force all current 3592 generation 2 drives to always write in the generation

   1 density until all drives are upgraded to generation 2.  This can be done by
   explicitly setting the FORMAT parameter on the device class to either 3592
   or 3592C.
   
   This case should not have any media problems, because all media is written in
   the generation 1 format that can be read by both generation 1 and generation
   2 drives.  Thus, all drives can verify labels and read all data written on
   the media.  However, this configuration doesn't allow the generation 2 drives
   to write or read in their optimal format.
   
2. For 349X and ACSLS libraries only, two library objects can be defined for the
   same physical library where the path for both libraries specifies the same
   special file name.  In this case, one library object would contain all of the
   generation 1 drives, and the other library object would contain all of the
   generation 2 drives.  In addition for 349X libraries, each library object
   should have disjoing scratch categories (including WORMscratch category if
   applicable).  This is a simple way to logically partition the generations
   without partitioning the hardware.  Because two library objects will be used
   a new device class and stgpool will also be necessary to refer to the new
   library object.  This case should also prevent any known media problems from
   mixing generations.

3. Define a new stgpool and device class for the generation 2 drives such that
   the old device class has a FORMAT parameter explicitly set to 3592 or 3592C
   (not DRIVE), and the new device class has a FORMAT parameter explicitly set
   to 3592-2 or 3592-2C (not DRIVE).  Finally, update the stgpool that will
   contain all the media written in generation 1 to have a MAXSCRATCH parameter
   of 0: UPDATE STGPOOL <gen1pool> MAXSCRatch=0
   
   This case will allow both generations to use their optimal format and
   minimize potential media problems by mixing generations, but it will not
   resolve all media issues.  Beyond the mount point issues for mixing LTO 
   generations, the following known remaining media issues exist:
   
   a. CHECKIN LIBVOL: The problem resides with using the CHECKLABEL=YES option.  
      If the label is currently written in a generation 2 format, a generation 1
      drive will fail this command for this particular media.  Thus, TSM
      recommends using CHECKLABEL=BARCODE to circumvent this issue for CHECKIN.
      
   b. LABEL LIBVOL: The problem again resides when the server tries to read the
      label if it is written in a generation 2 format and read from a generation
      1 drive.  In this case, the LABEL will fail unless OVERWRITE=YES is
      specified.  While this may work, please carefully verify that the media
      being labeled with OVERWRITE=YES has no active data on it.
      
   c. CHECKOUT LIBVOL: As with the previous 2 commands the same problem arises
      when TSM verifies the label (CHECKLABEL=YES) if it is written in a
      generation 2 format and read from a generation 1 drive.  Thus, TSM
      recommends using CHECKLABEL=NO to circumvent this issue for CHECKOUT. 

z/OS mixed drive configuration:

1. Use SMS to control the format. The storage administrator can specify a format 
   of EFMT1 when defining SMS dataclasses. ACS routines can be used to select 
   only volumes capable of using the generation 1 format, and to direct both 
   generation 1 and generation 1 drives to use the generation 1 recording 
   format. 
      
2. Define a new stgpool and device class for the generation 2 drives such that
   the old device class has a UNIT parameter that resolves to the generation
   1 drives only with a TSM devclass FORMAT parameter of  DRIVE, 3592 or 3592C 
   and the new device class has a UNIT parameter that resolves to generation 2 
   drives only with a FORMAT parameter of DRIVE, 3592-2 or 3592-2C.
*******************************************************************************

For the latest updates to Fixpack 5.3.2, please see Technote: Updates to
TSM Server V5.3.2 README. Use the search term 1217794.


*******************************************************************************
* Installation Information                                                    *
*******************************************************************************

The following sections include installation information for operating
systems supported on Tivoli Storage Manager Fixpack 5.3.2.


*******************************************************************************
* AIX Installation                                                            *
*******************************************************************************

Installation requisites for Tivoli Storage Manager Version 5.3 are: 
*  Operating System: AIX 5.1 (or later)
*  C++ Runtime for AIX version 6 (xlC.rte.6.0.0.0) or later. The latest
   PTF for this package has the xlC.rte.6.0.0.0 fileset plus any
   release-specific updates. It can be obtained from 
   http://www-1.ibm.com/support/docview.wss?rs=0&q1=C%2b%2b+Runtime&uid
   =swg2008374&loc=en_US&cs=iso-8859-1&cc=us&lang=en

*  Estimated Space Requirements: 
   *  At least 88 MB of disk space temporarily available for extracting
      the installation filesets from the tar.gz file.
   *  At least 200 MB of free disk storage and 1 GB of memory.
   *  The storage agent will require at least 40MB of temporary disk
      space.


Migrating from Tivoli Storage Manager Version 5.2
*************************************************

If you are running the 32-bit version of Tivoli Storage Manager Version
5.2 in a 64-bit AIX kernel environment, you must uninstall your current
version of Tivoli Storage Manager and then install the appropriate
Tivoli Storage Manager version 5.3 packages for the 64-bit kernel
environment.

If you are running the 64-bit version of Tivoli Storage Manager Version
5.2 in a 32-bit AIX kernel environment, you must uninstall your current
version of Tivoli Storage Manager and then install the appropriate
Tivoli Storage Manager version 5.3 packages for the 32-bit kernel
environment.


AIX Installation Instructions
*****************************

The following instructions apply to the Tivoli Storage Manager server
for AIX service level 5.3.2.0.

THIS SERVICE LEVEL IS INTENDED AS A COMPLETE SERVICE UPGRADE FOR YOUR
VERSION 5.3.0.0 AIX SERVER.

Even though you already accepted the license agreement when you
installed level 5.3.0.0, installation of this level will fail unless you
(re) accept the license agreement. The license agreement files are saved
in the directory /usr/swlag/$LANG/ if you wish to browse the license
agreement at a later time.

All packages are new/migrate install packages. This means: 

*  You can install without needing a prior release installed (a new
   install). If you have a prior version, a migrate installation will
   occur and your prior version will disappear.

*  Tivoli Storage Manager device definitions might not be preserved.
   After the installation you will have to redefine Tivoli Storage
   Manager devices. Record your current device definitions before you
   begin the installation. The following commands can be used to record
   current definitions: 
   ls_dev -Cs ftp > definitions.fcp
   ls_dev -Cs scsi > definitions.scsi

   Note: You do not have to record definitions for IBM(R) 3494, 3570,
         3575 or 3590. These devices use drivers supplied with the
         hardware.

*  You cannot reject a fileset (you will have to uninstall it).


To "install" as root user, complete the following steps: 

1. Halt your server.

2. Load the CD into the selected drive, or get the (bin)
   TSMSRVAIX5320.tar.gz and unzip/untar the file to extract all the
   installation packages.

3. Start SMIT and select the following options: 
   *  Software Install and Maintenance
   *  Install and Update Software
   *  Install and Update from ALL Available Software
   *  Specify INPUT device/directory
   *  List SOFTWARE to Install - Select the appropriate filesets to
      install for your configuration (see Table 1 below)
   *  Set "COMMIT software updates?" to Yes
   *  Set "SAVE replaced files?" to No

   You will be required to (re) ACCEPT new license agreements to install
   this level of the server. To view the license agreement, set "Preview
   new LICENSE agreements?" to Yes. To accept the license agreement, set
   "Accept new LICENSE agreements?" to Yes.

4. Redefine your Tivoli Storage Manager devices.

5. Restart the server.

Table 1. Software to Install for Different Environments
+-------------------------+-------------------------------------------+
| Environment             | Software Packages to Install              |
+-------------------------+-------------------------------------------+
| 32-bit kernel           |  * tivoli.tsm.devices.acsls STK Silo      |
| environment             | Support (optional)                        |
|                         |  * tivoli.tsm.devices.aix5.rte Device     |
|                         | Support - AIX 5.1 or 5.2, 32 and 64-bit   |
|                         |  * tivoli.tsm.server.com Server samples   |
|                         | and diagnostic utilities                  |
|                         |  * tivoli.tsm.server.rte Server runtime - |
|                         | 32-bit                                    |
|                         |  * tivoli.tsm.msg.en_US.server Message    |
|                         | Library and help                          |
|                         |  * tivoli.tsm.msg.en_US.devices SMIT menu |
|                         | catalogs                                  |
|                         |  * tivoli.tsm.license.rte License         |
|                         | enablement module - 32-bit kernel         |
|                         |  * tivoli.tsm.license.cert License        |
|                         | certificates                              |
|                         |  * tivoli.tsm.server.webcon               |
|                         | Administration Center                     |
+-------------------------+-------------------------------------------+
| 64-bit kernel           |  * tivoli.tsm.devices.acsls STK Silo      |
| environment             | Support (optional)                        |
|                         |  * tivoli.tsm.devices.aix5.rte Device     |
|                         | Support - AIX 5.1 or 5.2, 32 and 64-bit   |
|                         |  * tivoli.tsm.server.com Server samples   |
|                         | and diagnostic utilities                  |
|                         |  * tivoli.tsm.server.aix5.rte64 Server    |
|                         | runtime - AIX 5.1 or 5.2, 64-bit          |
|                         |  * tivoli.tsm.msg.en_US.server Message    |
|                         | Library and help                          |
|                         |  * tivoli.tsm.msg.en_US.devices SMIT menu |
|                         | catalogs                                  |
|                         |  * tivoli.tsm.license.aix5.rte64 License  |
|                         | enablement module - 64-bit kernel         |
|                         |  * tivoli.tsm.license.cert License        |
|                         | certificates                              |
|                         |  * tivoli.tsm.server.webcon               |
|                         | Administration Center                     |
+-------------------------+-------------------------------------------+
| If you are running in a |  * tivoli.tsm.msg.<your-language>.server  |
| language other than US  | Message Library and help                  |
| English, you must also  |  * tivoli.tsm.msg.<your-language>.devices |
| install your specific   | SMIT menu catalogs                        |
| "language pack" in      |                                           |
| addition to the         |                                           |
| required US English     |                                           |
| "language pack."        |                                           |
+-------------------------+-------------------------------------------+
| Install the following   |  * tivoli.tsm.devices.aix5.rte Device     |
| packages for the        | Support - AIX 5.1 or 5.2, 32 and 64-bit   |
| storage agent:          |  * tivoli.tsm.msg.en_US.server Message    |
|                         | Library and help                          |
|                         |  * tivoli.tsm.msg.en_US.devices SMIT menu |
|                         | catalogs                                  |
|                         |  * tivoli.tsm.Storage_Agent.rte Storage   |
|                         | Agent run time                            |
+-------------------------+-------------------------------------------+


*******************************************************************************
* HP-UX Installation                                                          *
*******************************************************************************

To install a new package, uninstall the old package and install the new
one in the same directory. The installation process is similar for
Tivoli Storage Manager server, storage agent, and device driver
packages.

Use the HP-UX utility swremove to remove old Tivoli Storage Manager packages
and then install the updates. If you are upgrading to a major release of TSM,
you will need to remove the existing license package and install the new one.
For example, if you're upgrading from TSM 5.2.x to TSM 5.3.x, remove the 5.2.x
license and install the 5.3.x license.

Examples:

swremove TIVsmS64.server

swremove TIVsmS64.license

swremove TIVsmHsta

 
You can obtain a list of installed Tivoli Storage Manager packages by
issuing 

swlist | grep TIV

Ignore client installations in the list produced. If a distribution file
is supplied with the extension of .img.gz it must be uncompressed for an
installable package. Uncompress with gzip. For example:

gzip -d <file name>

If a distribution is supplied with the extension of .tar.gz it must be
extracted for an installable package. Create a temporary directory and
extract the package. For example:

mkdir /tmp/TSM
cd /tmp/TSM
gzip -dc <file name> | tar xvf -

If the installable package is supplied on a CD-ROM or extracted from a
.tar.gz file use swinstall with the source argument (-s) pointing to the
package directory. On any package containing the Tivoli Storage Manager
server it is required that you accept license agreement terms. Because
the license terms must be accepted on some packages, always use
swinstall in non-interactive mode (no GUI). To enable the license
agreement display you must add the switch "ask=as_needed" (-x
ask=as_needed). For example: 

swinstall -s /cdrom -x ask=as_needed TIVsmS64 (64bit server)
swinstall -s /tmp/TSM -x ask=as_needed TIVsmHsta (storage agent)

A list of packages can be obtained with swlist -d -s <package dir>.

For more information about the HP-UX package tools or their settings,
see HP documentation in the Software Distributor Administration Guide
for HP-UX (available from HP's support web site) or see main pages.


*******************************************************************************
* Linux Installation                                                          *
*******************************************************************************

See the following sections for information on installing Tivoli Storage
Manager in a Linux environment. The following features are not
supported: 
*  Generic tape
*  Raw logical volumes


Supported Linux Environments
****************************

Tivoli Storage Manager 5.3.2.0 and above supports AMD64 and EM64T
processor types (x86_64). This support covers native 64-bit server and
storage agent for the 64-bit environment as well as the 32-bit Tivoli
Storage Manager server and storage agent in compatibility mode in a
64-bit environment. 

Notes: 

1. If you are running Tivoli Storage Manager on these processors in
   compatibility mode (e.g the x86 TSM packages installed on the 64-bit
   operating environment) and wish to migrate to the native 64-bit
   Tivoli Storage Manager packages, the install_server script that comes
   with the installation packages will uninstall all the x86 packages
   and then install the native 64-bit packages. The native 64-bit
   license enabler package will also need to be installed. This package
   is available by requesting a CD of Tivoli Storage Manager Fixpack
   5.3.2.0.

2. To acquire the license module for x86_64, obtain a CD or electronic
   iso image from your regular software order system. This could be
   Passport Advantage if you obtain your IBM software electronically.
   You must have an authorized user ID and password to receive your
   software from Passport Advantage. If you placed an order and CDs were
   shipped via the Advanced Administrative System (AAS), you may request
   an MES update (miscellaneous equipment update). For AAS information,
   see your SE if you have questions.

3. It is highly recommended that you migrate to native 64-bit packages
   on the x86_64 processors instead of running Tivoli Storage Manager in
   compatibility mode. This is because the 64-bit device drivers that
   you may need for devices used by the Tivoli Storage Manager server
   and storage agent may not run with Tivoli Storage Manager in
   compatibility mode.

4. The install_server script no longer supports automatic installation
   of Tivoli Storage Manager in compatibility mode. To install Tivoli
   Storage Manager in compatibility mode, obtain the i686 packages and
   install them manually using the rpm utility.

For a complete list of supported Linux environments, please visit
http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21107360


RPM Packages Included
*********************

See Table 2 for included RPM packages. One directory contains the RPM
packages for each architecture supported by Tivoli Storage Manager on
Linux. The directory content is as follows: 

*  i686/ - Contains rpm packages to be installed on 32-bit RHEL3, RHEL4,
   SLES8, and SLES9.

*  x86_64 - Contains 64-bit rpm packages to be installed on RHEL4 and
   SLES9.

*  ppc64/glibc-2.2/ - Contains 64-bit rpm packages to be installed on
   64-bit SLES8.

*  ppc64/glibc-2.3/ - Contains 64-bit rpm packages to be installed on
   64-bit RHEL3, RHEL4 and SLES9.

*  noarch/ - Contains packages for support on various languages other
   than English. They are to be installed on any Tivoli Storage Manager
   supported Linux environment.

Table 2. Software to Install for Different Environments
+---------------+-----------------------------------------------------+
| Environment   | Software Packages to Install                        |
+---------------+-----------------------------------------------------+
| x86           |  * TIVsm-server-5.3.2-0.i386.rpm - Tivoli Storage   |
|               | Manager server                                      |
|               |  * TIVsm-tsmscsi-5.3.2-0.i386.rpm - Tivoli Storage  |
|               | Manager non-IBM devices support                     |
|               |  * TIVsm-license-5.3.2-0.i386.rpm - Tivoli Storage  |
|               | Manager license enabler                             |
|               |  * TIVsm-stagent-5.3.2-0.i386.rpm - Tivoli Storage  |
|               | Manager storage agent                               |
+---------------+-----------------------------------------------------+
| x86_64(64bit) |  * TIVsm-server-5.3.2-0.x86_64.rpm - Tivoli Storage |
|               | Manager server                                      |
|               |  * TIVsm-tsmscsi-5.3.2-0.x86_64.rpm - Tivoli        |
|               | Storage Manager non-IBM devices support             |
|               |  * TIVsm-license-5.3.2-0.x86_64.rpm - Tivoli        |
|               | Storage Manager license enabler                     |
|               |  * TIVsm-stagent-5.3.2-0.x86_64.rpm - Tivoli        |
|               | Storage Manager storage agent                       |
+---------------+-----------------------------------------------------+
| s390x(64bit   |  * TIVsm-server-5.3.2-0.s390x.rpm - Tivoli Storage  |
| zSeries)      | Manager server                                      |
|               |  * TIVsm-tsmscsi-5.3.2-0.s390x.rpm - Tivoli Storage |
|               | Manager non-IBM devices support                     |
|               |  * TIVsm-license-5.3.2-0.s390x.rpm - Tivoli Storage |
|               | Manager license enabler                             |
|               |  * TIVsm-stagent-5.3.2-0.s390x.rpm - Tivoli Storage |
|               | Manager storage agent                               |
+---------------+-----------------------------------------------------+
| s390 storage  |  * TIVsm-tsmscsi-5.3.2-0.s390.rpm - Tivoli Storage  |
| agent (31bit  | Manager non-IBM devices support                     |
| zSeries):     |  * TIVsm-stagent-5.3.2-0.s390.rpm - Tivoli Storage  |
|               | Manager storage agent                               |
+---------------+-----------------------------------------------------+
| ppc64(64bit   |  * TIVsm-server-5.3.2-0.ppc64.rpm - Tivoli Storage  |
| pSeries)      | Manager server                                      |
|               |  * TIVsm-tsmscsi-5.3.2-0.ppc64.rpm - Tivoli Storage |
|               | Manager non-IBM devices support                     |
|               |  * TIVsm-license-5.3.2-0.ppc64.rpm - Tivoli Storage |
|               | Manager license enabler                             |
|               |  * TIVsm-stagent-5.3.2-0.ppc64.rpm - Tivoli Storage |
|               | Manager storage agent                               |
+---------------+-----------------------------------------------------+


Server Installation Instructions
********************************

You must accept the license terms in order to proceed with the server
installation. The server package will not install unless the license
terms are accepted. 

Note:  License terms are shipped with major product releases only. Thus,
      if you are installing fix pack 5.3.1.0, you need to install major
      release 5.3.0.0 first, and then perform a 5.3.2.0 upgrade.

1. 
   *  If you are installing from a CD media, insert the CD into your
      CD-ROM drive and change your directory to the CD-ROM drive. For
      example: 
      cd /mnt/cdrom

   *  If you obtained the package from the service ftp site, use the
      commands bunzip2 and tar to extract the rpm packages. For example:
      
      bunzip2 TIVsm-server-5.3.2-0.Linux.tar.bz2
      mkdir tsm
      cd tsm
      tar xvf ../TIVsm-server-5.3.2-0.Linux.tar

2. 
   *  If you are installing a major release (i.e. 5.3.0.0) or a fixpack
      (i.e. 5.3.1.0), execute the script install_server. For example:
      ./install_server [prefix]

      where prefix is optional and denotes the file system where you
      would like Tivoli Storage Manager to be installed. If no prefix is
      given, the default installation location is /opt.
   *  If you are installing an interim fix (i.e. 5.3.2.0), go to the
      directory for the target architecture and install the rpm files
      manually. For example: 
      cd i686/
      rpm -Uvh TIVsm-server-5.3.2-0.i386.rpm TIVsm-tsmscsi-5.3.2-0.i386.rpm

      Skip the rest of the installation steps.

3. If you are installing a major release, the installation step will
   display the license agreement and ask for it to be read and accepted.
   To read the license agreement, select a number for the language in
   which you prefer to display the license agreement from the following
   menu. Then press Enter.
   
   *  1. Czech
   *  2. English
   *  3. French
   *  4. German
   *  5. Italian
   *  6. Polish
   *  7. Portuguese
   *  8. Spanish
   *  9. Turkish

4. The install_server script will display the license agreement in the
   language specified, and ask for you to accept the terms. To accept
   the license agreement, press 1, followed by the Enter key.

5. Once you have accepted the license agreement, a menu will be
   displayed with all the available RPM packages for the corresponding
   platforms. At this point, you can either quit the install_server
   script by pressing 'q' followed by the Enter key, or select packages
   from the menu to be installed. If you exit the menu, you can install
   any of the RPM packages that correspond to your platform manually. 

   Note: For AMD64/EM64T 64-bit migration: If you are migrating the
         Tivoli Storage Manager server for AMD64/EM64T from
         compatibility mode to 64-bit mode, it is recommended that you
         let the install_server script perform the installation for you.
         The install_server script will remove the 32-bit server,
         tsmscsi, and license packages and install the 64-bit packages.
         It will ask you for confirmation before it removes any
         packages. Check for driver availability of all necessary
         hardware before migrating Tivoli Storage Manager to 64-bit. For
         IBMtape driver availability please visit
         ftp://ftp.software.ibm.com/storage/devdrvr/Linux/.

   The default installation location for Tivoli Storage Manager packages
   is /opt. To install to a different location, use the --prefix option
   in rpm. Refer to Red Hat Package Manager documentation, included with
   RPM, for details on its use. For example, if you are upgrading your
   i686 Tivoli Storage Manager server from TSM 5.2.4.0 to TSM 5.3.2.0,
   and TSM 5.2.4.0 is installed under the /usr file system, you would
   issue: 

   rpm -Uvh TIVsm-server-5.3.2-0.i386.rpm --prefix /usr


Storage Agent Installation Instructions
***************************************

If you are installing the storage agent for the first time on your
machine, use the command rpm -ivh <pkgname>, where pkgname is the
storage agent rpm file. For example:

rpm -ivh TIVsm-stagent-5.3.2-0.i386.rpm

If you are upgrading to a later version of the storage agent, use the
command rpm -Uvh <pkgname>, where pkgname is the storage agent rpm file
name. Note that if the older version of the storage agent is installed
under a non-default file system, use the --prefix rpm option so that the
new version gets installed in the correct file system. For example, to
upgrade from version 5.2.6.0 to version 5.3.2.0, you would issue: 

rpm -Uvh TIVsm-stagent-5.3.2-0.i386.rpm --prefix /usr

For pSeries, packages in the glibc-2.2 directory support SLES8, and
packages in the glibc-2.3 directory support SLES9 and RHEL3.


SLES9/pSeries Linux Information
*******************************

If you are running the Tivoli Storage Manager server on Linux on
SLES9/pSeries systems must have the system library level listed below or
newer in order for code page conversion to work properly. You will most
likely have code page conversion errors on the Tivoli Storage Manager
server when trying to use the IBM Tivoli Storage Manager Administration
Center unless the glibc-locale-64bit-9-200407271122 system library level
is installed.

To determine whether you have this library, issue the following command
from the command prompt on your operating system: 

rpm -qa | grep glibc-locale

You should see output similar to the following: 

glibc-locale-2.3.3-98.28
glibc-locale-64bit-9-200407271122


RHEL4 on x86/EM64T/AMD64 Information
************************************

If you are installing the Tivoli Storage Manager server or storage agent
on RHEL4, ensure that the C++ compatibility libraries are installed
before attempting to install Tivoli Storage Manager. If these libraries
are not installed, Tivoli Storage Manager installation will fail due to
missing dependencies.

The package that needs to be installed is compat-libstdc++ for x86. If
RHEL4 is running on AMD64 or Intel EM64T, the compatibility libraries
that are installed by default support only native x86_64 applications.
Since Tivoli Storage Manager will be running in compatibility mode, the
compat-libstdc++ for x86 will also need to be installed. The package can
be obtained from the RHEL4 insllation CDs, or from the Red Hat Network
web site at rhn.redhat.com.


*******************************************************************************
* Sun Solaris Installation                                                    *
*******************************************************************************

Updates for Fixpack 5.3.2

Notes for Solaris 9: IC46073 Installation of the TSM Server 5.2. and 
Higher Fails on Solaris 9 "Core System Support"
********************************************************************

At Version 5.2.2 and higher, the Tivoli Storage Manager server and
storage agent installations require presentation and acknowledgement of
the Electronic Licensing Agreement. This change requires packages that
are not automatically installed by the Core System Support option. If
the packages are not present, the installation will fail with messages
similar to: 

Exception in thread "main" java.lang.UnsatisfiedLinkError: exception 
occurred in JNI_OnLoad

JRE error attempting to evoke the license acceptance tool.
   Error code 1.
   Please call customer support.

The required packages have been empirically determined to be: 

*  SUNWlibC
*  SUNWxwice
*  SUNWctpls
*  SUNWlibCx
*  SUNWcpp
*  SUNWmfrun
*  SUNWzlib
*  SUNWj3rt
*  SUNWxwfnt
*  SUNWxwplt

Please note that this list can change without notice at IBM's sole
discretion.

In order for the Core System Support option install to complete
successfully, the required packages must also be installed on the
system.


Version 5.3.0 Installation
**************************

To install a new package on a Sun Solaris system, uninstall the old
package and install the new one in the same directory. The installation
process is similar for all of the Tivoli Storage Manager server, storage
agent, and device driver packages. 
*  Use the Sun Solaris utility pkgrm to remove old Tivoli Storage
   Manager packages before making any updates. For example: 
   *  To remove the server package, issue the following command:
      pkgrm TIVsmS

   *  To remove a device driver package, issue the following command:
      pkgrm TIVsmSdev

   *  To remove a storage agent package, issue the following command:
      pkgrm TIVsmSsta

*  You can obtain a list of currently installed Tivoli Storage Manager
   packages by issuing the following command: 
   pkginfo | grep TIVsmS

*  If a distribution file is supplied with the extension of .pkg.Z it
   must be uncompressed for an installable package. For example: 
   uncompress <file name>

*  If a distribution is supplied with the extension of .tar.Z it must be
   extracted for an installable package. Create a temporary directory
   and extract the package. For example: 
   mkdir /tmp/TSM
   cd /tmp/TSM
   uncompress -dc <file name> | tar xvf -

On any package containing the Tivoli Storage Manager server it is
required that you accept license agreement terms. You will be prompted
to read the license agreement and agree to it before installation
succeeds. If the installable package is supplied on a CDROM or extracted
from a .tar.Z file, use pkgadd with the directory argument (-d) pointing
to the package directory to list the packages. For example: 

pkgadd -d /cdrom 

OR 

cd <package directory>; pkgadd -d .

The list of packages will be displayed as part of the installation and
can be selected interactively. For more information about the package
tools or their settings, see the Sun Solaris documentation available at
SUN's support web site or see man pages.


*******************************************************************************
* Windows Installation                                                        *
*******************************************************************************

This is a Microsoft Windows Installer (MSI) installable package.

To install a package, download the appropriate file to your local
machine in binary. To unpack, simply execute the file. Each file, when
executed will unpack to a directory that you specify. Once unpacked to
your local machine, the installation will automatically begin. The
Tivoli Storage Manager Server default installation will include the
Tivoli Storage Manager Server and the Management Console.

If there is a need to reinstall, setup.exe can be run from the directory
specified when first unpacking.


*******************************************************************************
* Installing the Administration Center - New Interface                        *
*******************************************************************************

Tivoli Storage Manager Version 5.3 has replaced the administrator Web
interface, which used the HTTPPORT, with a new interface. The new
interface, called the Administration Center, runs under the Integrated
Solutions Console (ISC).

The Administration Center and the Integrated Solutions Console are
separate installations from the Tivoli Storage Manager server
installation. The instructions for the installation of the
Administration Center and the Integrated Solutions Console are located
on their respective CDs or image files.

You must install one of the following for the Integrated Solutions
Console: 
*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 AIX for use
   with Tivoli Storage Manager Administration Center

*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 Linux pSeries
   for use with Tivoli Storage Manager Administration Center

*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 Linux xSeries
   for use with Tivoli Storage Manager Administration Center

*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 Linux zSeries
   for use with Tivoli Storage Manager Administration Center

*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 Sun Solaris for
   use with Tivoli Storage Manager Administration Center

*  IBM Integrated Solutions Console Version 5.1 or 6.0.1 Windows for use
   with Tivoli Storage Manager Administration Center

You must then deploy the Tivoli Storage Manager Administration Center
into the Integrated Solutions Console. This is a separate CD or Image.

For additional information about the new Administration Center, please
see the Frequently Asked Questions located here:
http://www.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManagerVersionRelease.html


*******************************************************************************
* Licensing                                                                   *
*******************************************************************************

Licensing in the Tivoli Storage Manager Version 5.3.0 server has changed
from previous versions. Before upgrading from a previous version, delete
or rename the nodelock file (for all operating systems except z/OS) or
remove existing LICENSE options from the server's option file (for
z/OS). After installing the Version 5.3.0 server, you must register new
licenses. The REGISTER LICENSE command has changed with this version,
and its function is currently limited. You can register licenses for
server components. This includes Tivoli Storage Manager (base), Tivoli
Storage Manager Extended Edition, and Tivoli Data Retention Protection.

You cannot register licenses for components that are licensed on the
basis of processors (for example, Tivoli Storage Manager for Mail,
Tivoli Storage Manager for Databases, Tivoli Storage Manager for ERP,
Tivoli Storage Manager for Hardware, Tivoli Storage Manager for Space
Management).

Your license agreement determines what you are licensed to use, even if
you cannot use the REGISTER LICENSE command to register all components.
You are expected to comply with the license agreement and use only what
you have purchased. Use of the REGISTER LICENSE command implies that you
agree to and accept the license terms specified in your license
agreement.


REGISTER LICENSE on UNIX, Linux and Windows
*******************************************

Command syntax: 

REGister LICense FILE=<license_file>

FILE
   
   Specifies the name of the enrollment certificate file containing the
   license to be registered. The specification can contain a wildcard
   (*). Enter the complete file name or a wildcard in place of the file
   name. The file names are case-sensitive.

   To register additional clients, specify the names of the following
   enrollment certificate files: 
   *  tsmbasic.lic - To license base IBM Tivoli Storage Manager.
   *  tsmee.lic - To license base IBM Tivoli Storage Manager Extended
      Edition. This includes the Disaster Recovery Manager, large
      libraries, and NDMP.
   *  dataret.lic - To license IBM Tivoli Storage Manager for Data
      Retention. This is required to enable Data Retention Protection as
      well as Expiration and Deletion Suspension (Deletion Hold).

Examples:
   
   To register Tivoli Storage Manager Extended Edition, enter the
   following command: 

   register license file=tsmee.lic

   To register all license files using a wildcard, enter the following
   command: 

   register license file=*.lic


REGISTER LICENSE on z/OS
************************

Command syntax: 

REGister LICense=<license_keyword>

Note: The REGISTER LICENSE command adds a LICENSE statement to the end
      of the server options file if it completes successfully. To use
      this command, ensure that the options file as specified in the
      server startup JCL (OPT DD statement) is coded with a DISP=MOD
      parameter, and not DISP=SHR.


BASICEDITION
   To license base IBM Tivoli Storage Manager.

EXTENDEDEDITION
   To license base IBM Tivoli Storage Manager Extended Edition. This
   includes the Disaster Recovery Manager and large libraries.

DATARETENTION
   To license IBM Tivoli Storage Manager for Data Retention for z/OS.
   This is required to enable Data Retention Protection as well as
   Expiration and Deletion Suspension (Deletion Hold).

Examples:
   
   To register Tivoli Storage Manager Extended Edition, enter the
   following command:

   register license EXTENDEDEDITION

License registration on z/OS can also be done by editing the server
options file. See the Administrator's Reference for information on how
to edit the options file. The only values allowed with the LICENSE
parameter for Tivoli Storage Manager 5.3.0 are BASICEDITION,
EXTENDEDEDITION and DATARETENTION.


*******************************************************************************
* Migration Information                                                       *
*******************************************************************************

Changes for Fixpack 5.3.1

Migration and Password Length Considerations
********************************************

When the server database is upgraded to version 5.3.0, the encryption
level of stored passwords is converted from DES 56-bit to AES 128-bit.
During the conversion, decrypted passwords are checked against the
server minimum password length setting. If a password is shorter than
the minimum length, an invalid password error message is issued and the
database upgrade fails.

Passwords shorter than the minimum length can exist if the server's
minimum password length setting has been changed. Changing the setting
does not affect existing passwords. The new password length is only
enforced when passwords are first registered or updated. Any previously
created or expired passwords that do not meet the current length
requirement are considered invalid during the database upgrade.

If there is any possibility that shorter passwords are stored in the
server database, use the following upgrade procedure: 

1. Temporarily set the minimum password length to zero (0). To change
   the minimum password length, you can use either the Administration
   Center or the SET MINPWLENGTH command.

2. Back up the current server database.

3. Install the new version of Tivoli Storage Manager.

If you have already attempted to upgrade to Version 5.3.0, and are
unable to roll back to the previous version, contact customer support
for further assistance. See APAR IC44367 for more information.


Changes for Version 5.3.0

Migrating to Tivoli Storage Manager Version 5.3 from Previous Versions
**********************************************************************

You can migrate directly to Tivoli Storage Manager Version 5.3 from any
previous version of Tivoli Storage Manager. The amount of time to
migrate from version 5.2 to 5.3 is negligible. The change in database
size between version 5.2 and 5.3 is also negligible. Versions prior to
5.2 will take longer to migrate. The older the version, the longer this
process will take. If migrating to Tivoli Storage Manager from any
previous release, you should take actions to clean up system objects.

Before migrating, back up your database with type=full and save your
Tivoli Storage Manager executables. If you need to revert to a previous
release, you will have to restore from that database backup.

If installing Tivoli Storage Manager Version 5.3 on AIX Version 5.1, you
must first upgrade the C++ Runtime for AIX to Version 6. This is fileset
xlC.rte.6.0.0.0, which is installed by default on AIX 5.2 and higher.
The latest PTF for this package has the xlC.rte.6.0.0.0 fileset plus any
release-specific updates. It can be obtained from: 

http://www-1.ibm.com/support/docview.wss?rs=0&q1=C%2b%2b+Runtime&uid
=swg2008374&loc=en_US&cs=iso-8859-1&cc=us&lang=en

When the 5.3 server starts existing FILE volumes in FILLING state are
marked as full. In Version 5.2.x and prior servers, the server accepted
a PATH definition for a local FILE Library and FILE drives, although it
was not used in any way. Such definitions are not accepted by a Version
5.3 server and are rejected. This could be problematic if these
definitions are contained in a devconfig file, and must be removed
manually.

For more information regarding migrating to Version 5.3, refer to the
Installation Guide. For more information regarding cleaning up system
objects refer to the following Tivoli Storage Manager flashes:
FLASH10201, FLASH10258, and 1078582.


Migration and LAN-free Considerations
*************************************

Only storage agents Versions 5.2.3, 5.2.4, and 5.3 are supported by
Tivoli Storage Manager Version 5.3. Before moving to version 5.3, you
must ensure your storage agents are upgraded to one of these levels.

Please note that storage agents at the Version 5.2.x level can not
access shared FILE volumes ( using SANergy ) on 5.3.x servers using
LAN-free protocols. Requests by 5.2.x storage agents are automatically
re-directed to the server and handled using LAN protocols.


*******************************************************************************
* Updates for Fixpack 5.3.2                                                   *
*******************************************************************************

ACSLS Library Support for HP-UX and Linux
*****************************************

The ACSLS library type is now supported on the Linux and HP-UX
platforms. The Tivoli Storage Manager server supports StorageTek (STK)
libraries managed by ACSLS or Library Station for library sharing and
LANfree configurations.

As a result of this support, usage for the commands listed below has
changed. Please refer to the online version of the Administrator's Guide
and Reference books for usage documentation on these commands at
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp 

*  AUDIT LIBRARY
*  CHECKIN LIBVOL
*  CHECKOUT LIBVOL
*  DEFINE DRIVE
*  DEFINE LIBRARY
*  DEFINE PATH
*  LABEL LIBVOLUME
*  MOVE DRMEDIA
*  MOVE MEDIA
*  QUERY DRIVE
*  QUERY LIBRARY
*  UPDATE DRIVE
*  UPDATE LIBRARY
*  UPDATE PATH


Automatic Volume Labeling Support for Non-SCSI Libraries
********************************************************

Automatic volume labeling support has been enhanced to enable the use of
the AUTOLABEL parameter in place of DSMLABEL or LABEL LIBVOLUME for
non-SCSI libraries. Using the AUTOLABEL parameter allows volumes to be
labeled as they are needed for backup operations and eliminates having
to label all volumes before they are checked in to Tivoli Storage
Manager inventory.

The DEFINE and UPDATE LIBRARY commands will be enabled for the following
library types: 349X, ACSLS, EXTERNAL, MANUAL. The syntax changes are as
follows:

                                  .-AUTOLabel--=--Yes-----------.
>>-DEFine LIBRary--library_name--+-----------------------------+-><
                                  '-AUTOLabel--=--+-No--------+-'
                                                  +-Yes-------+
                                                  '-OVERWRITE-'

>>-UPDate LIBRary--library_name--+-----------------------------+-><
                                  '-AUTOLabel--=--+-No--------+-'
                                                  +-Yes-------+
                                                  '-OVERWRITE-'

The AUTOLABEL parameter will default to YES for all Non-SCSI libraries
and to NO for SCSI libraries.

In a shared library environment, the library manager is responsible for
labeling volumes, so there is no need to specify the AUTOLABEL parameter
for a library type of SHARED.


Formatting Volumes for z/OS LAN-free Operations
***********************************************

Prior to Version 5.3.2, Tivoli Storage Manager required you to use an
operation such as MOVE DATA or a LAN-based backup to write data to a
tape so that it could be used from open systems for LAN-free operations.
However, Tivoli Storage Manager can now quickly and easily format
LAN-free-capable volumes dynamically when they are requested by the
storage agent. 

You can still use the old method, as long as the new server option LFVOLUMEFORMATCOUNT is set to 0. The default for 5.3.2 is to allow 
automatic formatting. Another method is to use the new command FORMAT 
LFVOLUME to format one or more volumes and have them available in a 
storage pool and ready for LAN-free volume requests.


1. LFVOLUMEFORMATCOUNT Server Option

The LFVOLUMEFORMATCOUNT server option specifies the number of volumes
that the Tivoli Storage Manager server will format automatically for
LAN-free operations if the storage pool does not contain any formatted
volumes. The value you specify is also the default value for the number
of volumes to be formatted when using the FORMAT LFVOLUME command.

During the formatting process, the server checks the storage pool for
empty, unformatted volumes. Empty defined volumes are formatted first,
if any are available. If none are available, the server formats scratch
volumes. To ensure the success of automatic formatting, you need to
verify that sufficient scratch volumes are available. The formatting
process stops when the requested number of volumes have been formatted
or when scratch volumes are no longer available.

If you specify a value greater than one for LFVOLUMEFORMATCOUNT, the
server will format a single volume to satisfy the request of a storage
agent. The server will start a background process to format the
additional volumes only if a formatting process is not currently running
for the specified storage pool.

To reduce competition for drives during busy client backup periods,
consider formatting volumes using the FORMAT LFVOLUME command and having
them available in the storage pool before the storage agent makes a
request. To change the value for this option while the server is
running, use the SETOPT command.

Option Syntax
         LFVOLUMEFORMATCOUNT number


Parameters
         NUMBER

            Specifies the number of volumes the Tivoli Storage Manager
            server will format automatically for LAN-free operations if
            the storage pool does not contain any formatted volumes. The
            number is also the default value for the number of volumes
            to be formatted when using the FORMAT LFVOLUME command.

            Enter a number 0 - 255. A value of zero means that no
            volumes will be formatted automatically and that LAN-free
            sessions will fail if the storage pool does not contain any
            formatted volumes. The default value of LFVOLUMEFORMATCOUNT
            is 1.

Examples 
         lfvolumeformatcount 12


2. FORMAT LFVOLUME Command

The FORMAT LFVOLUME command can be used to format one or more volumes
for LAN-free operations. The formatted volumes will be available in the
storage pool when a backup/archive client contacts a storage agent for a
backup, and the storage agent contacts the z/OS server for volumes.

LAN-free operations on a z/OS server require formatted volumes. LAN-free
sessions will fail if a storage pool does not contain any formatted
volumes and does not allow automatic formatting. Automatic formatting is
controlled by the server option LFVOLUMEFORMATCOUNT. For details, see
the information on the LFVOLUMEFORMATCOUNT server option, above. For
additional details about LAN-free operations on z/OS, refer to the
Administrator's Guide.

During the formatting process, the server checks the storage pool for
empty, unformatted volumes. Empty defined volumes are formatted first,
if any are available. If none are available, then scratch volumes are
formatted. The formatting process stops when the requested number of
volumes have been formatted or when scratch volumes are no longer
available. To ensure that the server formats the specified number of
volumes, verify that the allowable supply of scratch volumes in the
storage pool is sufficient.

Note: Automatic formatting will not start a formatting process if one is
      already running for the storage pool. However, you can start
      multiple simultaneous formatting processes by manually issuing the
      FORMAT LFVOLUME command multiple times. The number of processes
      started should not exceed the number of tape drives available for
      the device class.

Privilege Class
         To issue this command you must have system privilege,
         unrestricted storage privilege, or restricted storage
         privilege.

Command Syntax
         FORMat LFVolume pool_name NUMber = number Wait = No/Yes

Parameters

         pool_name
                  This is a required parameter that specifies an
                  existing primary sequential-assess storage pool
                  defined on a LAN-free-capable device class (3590, 3592
                  or ECARTRIDGE).

         number   This is an optional parameter that specifies the
                  number of volumes to format. You can specify a value
                  from 1 to 255. If you do not specify a value, the
                  default is the value of the LFVOLUMEFORMATCOUNT
                  option. If the value of LFVOLUMEFORMATCOUNT is zero,
                  you must specify a number.

         Wait     This is an optional parameter that specifies whether
                  to wait for the server to complete processing this
                  command in the foreground. The default is NO. Possible
                  values are: 

                  No 
                     Specifies that the server processes this command in
                     the background. You can continue with other tasks
                     while the command is being processed. Messages
                     created from the background process are displayed
                     on an MVS system console and in the Tivoli Storage
                     Manager server's Job Log. To cancel a background
                     process, use the CANCEL PROCESS command.

                  Yes
                     Specifies that the server processes this command in
                     the foreground. Wait for the command to complete
                     before continuing with other tasks. The server then
                     displays the output messages to the administrative
                     client when the command completes. 

                     Note: You cannot specify WAIT=YES from the server
                           console when you issue this command with the
                           MVS MODIFY command.

Examples 

         Task

         Nightly backups must complete without requiring additional
         volumes to be formatted during the backup. A total of 15
         LAN-free-capable volumes must be available in the storage pool
         to complete the backup. Currently, the LAN-free storage pool
         has only five empty formatted volumes. Format 10 additional
         volumes. You want the command to complete before continuing
         with other tasks: 

         Command  format lfvolume lanfreepool number=10 wait=yes


IBM LTO WORM Support
********************

The Tivoli Storage Manager server now supports IBM LTO WORM devices and
media in version 5.3.1.2. IBM LTO WORM devices are only available with
Generation 3 devices and media. In order to utilize LTO WORM, there
needs to be an LTO WORM device class defined: 

DEFINE DEVCLASS <class name> LIBRARY=<library name> DEVTYPE=LTO WORM=YES

Tivoli Storage Manager can only distinguish WORM media from rewritable
media when the media is mounted. Therefore, all WORM media needs to
either be checked in with CHECKLabel=Yes or labeled with the CHECKIN
parameter specified. Any media that is checked in without mounting in
the drive is considered rewritable.


Multiple Server Entries in the Windows Management Console
*********************************************************

The Tivoli Storage Manager Management Console for Windows displays
multiple entries for same machine name under TSM Computers. To determine
if this issue applies to you, look at the Management Console tree view
and see if there are duplicate entries for your local computer. One will
display machine(Windows - Local) and one or more others will display
machine(Windows). For example, if your machine name is THINK, you would
normally see the following: 

[-] Tivoli Storage Manager
        [+] THINK(Windows - Local)

If there are multiple entries, you would see this instead:

[-] Tivoli Storage Manager
        [+] THINK(Windows - Local)
        [+] THINK(Windows)

Note that this is only an issue for duplicates of the local machine
name. It is not an issue if you have additional tree items for other
machines. For example, there is no problem with the following: 

[-] Tivoli Storage Manager
        [+] THINK(Windows - Local)
        [+] NYSERVER(Windows)
              [+] AZSERVER(UNIX)

If This Issue Applies to You:

Complete the following steps. 

1. Install the fixpack.

2. Export the Tivoli Storage Manager console key to a file named
   tsm_console.reg using reg.exe on Windows XP or 2003: 
   reg export "HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM\CurrentVersion\Console"
   tsm_console.reg

   Use regedit.exe on Windows 2000: 
   regedit
   navigate and right click on
   "HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM\CurrentVersion\Console"
   choose File | Export... and save to file tsm_console.reg

3. Examine the exported registry file and see if anything is included
   below the console key entry. If there is no text below this line: 
   [HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM\CurrentVersion\Console]

   then proceed to Step 9. Otherwise, continue to Step 4.

4. Start the Tivoli Storage Manager Management Console.

5. Right-click on each localmachine (Windows) and choose Remove Computer
   to remove the entry from the Management Console.

6. Shut down the Tivoli Storage Manager management console.

7. Import the saved Console registry key. For Windows 2003 or XP: 
   reg import tsm_console.reg

   For Windows 2000: 
   regedit
   choose File | Import... and select file tsm_console.reg

8. Done.

9. Under the machinename (Windows - Local), expand the server instance.
   For example 
   TSM Server1

10. Expand Reports and then right click on Operational Reports.

11. Choose New and then click OK twice. If prompted, enter your Tivoli
   Storage Manager administrator account information and click OK. This
   should create a report as well as recreating the registry keys for
   the server instance under the Console registry key. You can remove
   the report at this point since the registry has been corrected.

12. Repeat Step 11 for any additional server instances that appear under
   machinename(Windows-Local).

13. Done.


Prompt for Reboot After Installation of the Server Module
*********************************************************

The Tivoli Storage Manager server may prompt you to reboot after
installation. This will happen if one of the system DLLs that Tivoli
Storage Manager is installing is newer than one of the DLLs on your
system at the time of install. This is normal behavior and will only
happen once. That is, if you were to uninstall and then re-install the
Tivoli Storage Manager server, you should not see this message because
the system DLL will have been updated as part of the first install.

The set of system DLLs that Tivoli Storage Manager may update as part of
installation includes the following: atl71.dll, mfc71.dll, mfc71u.dll,
msvcp71.dll, msvcr71.dll, msxml4.dll, msxml4a.dll, msxml4r.dll.


Removing Tivoli Storage Manager from your Windows System
********************************************************

Uninstalling the Tivoli Storage Manager server using Add/Remove programs
in the Windows Control Panel will not completely remove Tivoli Storage
Manager artifacts such as file system and registry entries from your
system. This is by design and is intended to ensure that people do not
accidentally delete information that may be costly or impossible to
recreate.

If your goal is to completely remove Tivoli Storage Manager from your
system, you can do so using the following procedure. Note that a number
of steps must be performed prior to using Add/Remove programs. 
 
1. Remove the Tivoli Storage Manager client Windows services using the
   backup-archive client setup wizard. To start the backup-archive
   client click through the following: Start --> All Programs --> Tivoli
   Storage Manager --> Backup-Archive GUI.

2. From the main menu, choose Utilities --> Setup Wizard. You will see
   six check boxes on the dialog that appears. For this procedure, you
   will ignore the first and only use the last five. For each of the
   last five boxes, do the following: 
   a. Select the check box and click Next.
   b. If the remove option is not greyed out, select it and click Next
      until you complete the wizard. If the remove option is greyed out,
      click Cancel.
   c. Select the next check box and repeat from Step b.

   Exit from the backup-archive GUI.

3. Remove the Tivoli Storage Manager server Windows services using the
   Tivoli Storage Manager Management Console. To start the Tivoli
   Storage Manager Management Console, click through the following:
   Start --> All Programs --> Tivoli Storage Manager --> Management
   Console. 
   a. In the tree view under Tivoli Storage Manager, find the entry that
      ends with the string (Windows - Local) and expand it.
   b. Right-click on the entry titled TSM Server1 and if it is not
      greyed out, choose Delete Server Instance.
   c. Click on Select-All.
   d. Click Delete.
   e. Click Yes.
   f. Click Done.
   g. Repeat for any additional Tivoli Storage Manager server instances
      shown.
   h. Exit from the Management Console.

4. Ensure that no Tivoli Storage Manager components are running. Tivoli
   Storage Manager includes a number of GUIs and command line interfaces
   in addition to Windows services. Before uninstalling Tivoli Storage
   Manager, you should ensure that no applications are running. To
   uninstall the components, complete the following steps: 
   a. Click through Start --> Control Panel --> Add or Remove Programs.
   b. Select each installed Tivoli Storage Manager component and click
      Remove. Typical components include the following: 
      *  IBM Tivoli Storage Manager Client
      *  IBM Tivoli Storage Manager Device Driver
      *  IBM Tivoli Storage Manager License
      *  IBM Tivoli Storage Manager Server

      If you see any messages suggesting a reboot you can ignore them
      until all Tivoli Storage Manager components have been removed.

5. If you installed an IIS Virtual Directory for use with the Tivoli
   Storage Manager Operational Reporting web summary feature you should
   remove it. Right click on My Computer and choose Manage. My Computer
   should be located on your desktop or after clicking the Windows Start
   menu. Expand the tree and look for tsmreptweb. For example: 
   Services and Applications
        Internet Information Services
             Web Sites
                  Default Web Site
                       tsmreptweb

   When you find it, right click on it and choose Delete.

6. Remove Tivoli Storage Manager artifacts from the file system.
   *  By default Tivoli Storage Manager is installed to c:\program
      files\tivoli\tsm but you may have installed it somewhere else.
      Examine the contents of the Tivoli Storage Manager directory and
      ensure that you do not want to keep any of the files that may be
      left. If not, you can deletec:\program files\tivoli\tsm (or
      wherever you installed Tivoli Storage Manager) along with all
      subdirectories.
   *  By default, when you install Tivoli Storage Manager, it will
      unpack temporary files into a directory named c:\tsm_images. Look
      for this directory. When you find it, you should ensure that you
      no longer want to keep any of the files under it. If not, you can
      delete it along with any subdirectories.
   *  The Tivoli Storage Manager server may also create a directory
      named tsmdata at the root of various drives in order to store disk
      volumes. You should look for these directories and if found ensure
      that you do not want to keep any of their contents. You can then
      delete the directories.

7. Remove Tivoli Storage Manager artifacts from the registry. 

   Note: This procedure modifies the Windows registry and you should
         exercise great care anytime you edit the registry because
         accidentally changing the wrong value in the registry can cause
         your computer to fail to boot and data may be lost.

   a. Click Start --> Run.
   b. Type "regedit" and click OK.
   c. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\IBM\ADSM.
   d. Right-click ADSM and choose Delete.

   If you were prompted to reboot the computer at any point in the
   procedure you should do it now. Once the computer restarts, Tivoli
   Storage Manager should be completely removed from your system.


SANergy Support Page for Access to the Latest SANergy Levels
************************************************************

Updates to the version of SANergy included with Tivoli Storage Manager
Enterprise Edition can be found at the Tivoli SANergy support page,
http://www-306.ibm.com/software/sysmgmt/products/support/TivoliSANergy.html

Please access this page to obtain the latest level of Tivoli SANergy.


The Tivoli Storage Manager Device Driver (TSMSCSI) and Windows Logo 
Certification
*******************************************************************

The Tivoli Storage Manager device driver (tsmscsi) is a WDM device
driver that runs on Windows 2003. tsmscsi is a plug and play function
driver for storage devices including tape drives, optical drives and
medium changers. It supports Tivoli Storage Manager-defined IOCTLs but
not the Windows standard IOCTLs for storage devices. If installed, it is
loaded when a device which has been configured for the Tivoli Storage
Manager device driver is detected by the Plug and Play manager.

IBM has done extensive testing with the tsmscsi device driver and is
confident in its stability and function. It is fully supported by IBM.
IBM is actively working with Microsoft on a driver signing process but
the driver is currently not signed. Since tsmscsi is not signed, it was
not tested as part of the Windows certification process.

The tsmscsi device driver is included with the Tivoli Storage Manager
server as a separate installation package and is not installed by
default. Its use is optional for disk-only configurations or for
configurations where device drivers are provided separately. This is the
case, for example, with the IBM LTO devices which use a different IBM
device driver not included with Tivoli Storage Manager.


Time-out on Formatting Large Disk Volumes on FAT32 Partitions
*************************************************************

The Tivoli Storage Manager initial configuration wizard provides an
option to create a disk storage pool. In some cases, usually with
multi-gigabyte volumes on FAT32 file systems, it has been observed that
the operation may not complete. Instead, you may see an error message
similar to the following: 

ANRU10008E Timed out attempt to issue a command to the server. You
can adjust the time-out value under the Settings menu item.

It is no longer possible to update the time-out value and the message
text will be updated to reflect this. Instead, the recommended procedure
to correct this problem is to issue the DEFINE VOLUME command at an
administrative command prompt. For example, to create and define a 3GB
disk storage pool volume to Tivoli Storage Manager, you can issue the
following command: 

define volume backuppool e:\tsmdata\server1\disk2.dsm formatsize=3000

Issue "help define volume" at an administrative command prompt or refer
to the Tivoli Storage Manager Administrator's Reference for more
information. You can also issue the QUERY VOLUME command to see a list
of existing volumes along with their locations. Note that the
recommended file system to use for disk volumes on Windows is NTFS and
the use of FAT32 volumes is discouraged.


Tivoli Storage Manager for Data Retention Name Change
*****************************************************

The name for IBM Tivoli Storage Manager for Data Retention has changed
to IBM System Storage Archive Manager. This product provides data
retention policies that help meet regulatory requirements. The name
change applies to all operating systems except z/OS.


TSMDLST Update for Windows
**************************

TSMDLST is a utility that can be used to display information for devices
attached to a Windows based computer. It is especially useful when
configuring devices for use with the Tivoli Storage Manager server and
storage agents as it will display the Tivoli Storage Manager name and
type needed for Tivoli Storage Manager commands. TSMDLST displays the
SCSI ID, LUN, Bus, Port and device identifier information which
typically includes microcode level information. In SAN environments,
TSMDLST will list any host bus adapters (HBAs) along with any
corresponding device driver information. For SAN devices the Serial
number (SSN) and World Wide Name (WWN) are also displayed if they can be
detected.

Starting with Fixpack 5.3.2, the TSMDLST utility can also help keep
Tivoli Storage Manager path statements up-to-date for IBM tape devices.
This can be especially useful when working with versions of the server
that do not include the Accurate SAN Mapping feature. For example, if a
pre-Version 5.3 Tivoli Storage Manager server is installed on AIX and
path statements need to be set up for a Windows based storage agent,
TSMDLST can be used to display the required information and also
generate a macro that can be used to update the paths.

All previous functionality of TSMDLST is still available and the command
syntax is backwards compatible to help ensure that any customer written
scripts that use TSMDLST will continue to run without change.
Previously, the only options supported were /? and /all. See the
following sections for a complete list of options that are now available
along with some example commands.


Syntax

The utility syntax is as follows:

	tsmdlst [option]


Options

[/computer=computername] 
         Specifies the name of the computer that devices will be listed
         for. The default is the local machine.

[/detail] 
         Displays a long list instead of just a summary.

[/all]   Includes all devices when the TSMDLST utility is run. The
         default is to only include tape drives and libraries.

[/nogenerictapecheck] 
         Skips the step for opening detected drives to see if they are
         supported for Tivoli Storage Manager generictape.

[/nohbacheck] 
         Skips the step for HBA API detection (may speed up processing).
         This option is useful when debugging is needed.

[/trace] 
         Stores diagnostic output in tsmdlst_trace.txt.

[/?]     Displays usage information.

[/xinquiry] 
         Provides an alternate way to obtain serial number and world
         wide name information. This option is used only for devices
         supported by the IBM tape device driver. The following options
         are specific to the /xinquiry option: 

         [/processAll] 
                  Indicates that the process should loop until all
                  devices are processed.

         [/maxRetries=#] 
                  (This option requires /processAll) Indicates the
                  maximum number of attempts to open each drive.

         [/genpathfile] 
                  Use this option to generate a list of devices and
                  serial numbers. The tsmdlst_pathfile.txt file is
                  written with information for /genmacropathsync and
                  /genmacropathoffline.

         [/includelib] 
                  If specified the list will include libraries as well
                  as drives.

[/genmacropathsync]
         Generates a macro to synchronize Tivoli Storage Manager paths
         for the storage agent based on serial number. A drive must have
         a serial number defined to Tivoli Storage Manager for this
         option to work.

[/genmacropathoffline]
         Generates a macro to update Tivoli Storage Manager paths for
         the storage agent to online or offline status based on drive
         accessibility. A drive is accessible if an operating system
         open call results in: ERROR_SUCCESS, ERROR_BUSY or
         ERROR_ACCESS_DENIED. This option only works for devices using
         the IBM device driver. A symbolic name, for example \\.\tape0,
         is required to open a device.

[/execmacropathoffline]
         Executes the macro produced by the /genmacropathoffline option.
         This option will only work if /genmacropathoffline is also
         specified.

[/execmacropathsync]
         Executes the macro produced by the /genmacropathsync option.
         This option will only work if /genmacropathsync is also
         specified.

The following options are specific to /genmacropathoffline and 
/genmacropathsync
         

         [/server=servername] 
                  Specifies the server name the storage agent is using.

         [/stagent=stagentname] 
                  Specifies the storage agent's name.

         [/tcps=address] 
                  Specifies the Tivoli Storage Manager server address.

         [/tcpp=port] 
                  Specifies the Tivoli Storage Manager server port. The
                  default is 1500.

         [/id=id] 
                  Specifies the Tivoli Storage Manager administrative
                  ID.

         [/pass=password] 
                  Specifies the Tivoli Storage Manager administrative
                  password.

         [/devicetype=drivetype] 
                  This option is case sensitive and optional. If
                  specified, filters on the drive's device type. For
                  example, LTO.

         [/libraryname=libname] 
                  This option is case sensitive and optional. If
                  specified, filters on the drive's library name. For
                  example, LTO3584.

         [/execmacropathsync] 
                  Issues the path sync macro to the Tivoli Storage
                  Manager server.

         [/execmacropathoffline] 
                  Issues the path offline macro to the Tivoli Storage
                  Manager server.

         [/addpaths] 
                  This option is used with the /genmacropathsync option.
                  If specified and if needed, it adds define and update
                  path statements.

         [/verbose] 
                  Provides path and drive information returned from the
                  Tivoli Storage Manager server and machine information
                  from the file generated by the /genpathfile option.

         [/encodednames] 
                  If this option is specified, and path is set to
                  online=no then the device name will encode time stamp,
                  error, device as the updated device name.


Examples

tsmdlst

tsmdlst /xinquiry /genpathfile /processall /maxretries=100

tsmdlst /genmacropathsync /execmacropathsync /id=admin /pass=admin /tcps=io 
/server=io_server1 /stagent=nova_sta

tsmdlst -genmacropathoffline -execmacropathoffline -id=admin -pass=admin -tcps=io 
-server=io_server1 -stagent=nova_sta


Notes


*  If HBAs are detected, the type and firmware information will be
   displayed unless the /nohbacheck option is used.
*  If the /xinquiry option is used, the hbaapi.dll load will not take
   place and instead the serial number information will be obtained
   using ibmtape xinquiry ioctl.
*  For related information, please refer to APAR IC47192.


*******************************************************************************
* Updates for Fixpack 5.3.1                                                   *
*******************************************************************************

General LTO3 Support
********************

LTO Generation 3 drives are supported with automated libraries such as
SCSI and ACSLS. This support is available for Tivoli Storage Manager
Version 5.2.4.0 and above, including 5.3.0.0.

Capacity:
         The new LTO3 drives and media have a capacity of 400GB per
         cartridge of uncompressed data and a capacity of 800GB per
         cartridge for compressed data.

Device Class Information:
         In order to utilize this new hardware through Tivoli Storage
         Manager, use the following when defining a device class that
         uses LTO3 drives: 
         *  devtype=LTO
         *  format=<DRIVE, ULTRIUM3, ULTRIUM3C>


Command Syntax:
         
         >>-DEFine DEVclass--device_class_name--------------------------->
         
         >--LIBRary--=--library_name--DEVType--=--LTO-------------------->
         
            .-FORMAT--=--DRIVE---------.
         >--+--------------------------+--+----------------------+------->
            '-FORMAT--=--+-DRIVE-----+-'  '-ESTCAPacity--=--size-'
                         +-ULTRIUM---+
                         +-ULTRIUMC--+
                         +-ULTRIUM2--+
                         +-ULTRIUM2C-+
                         +-ULTRIUM3--+
                         '-ULTRIUM3C-'
         
            .-PREFIX--=--ADSM-------------------.
         >--+-----------------------------------+------------------------>
            '-PREFIX--=--+-ADSM---------------+-'
                 '-tape_volume_prefix-'
         
            .-MOUNTRetention--=--60------.  .-MOUNTWait--=--60------.
         >--+----------------------------+--+-----------------------+---->
            '-MOUNTRetention--=--minutes-'  '-MOUNTWait--=--minutes-'
         
            .-MOUNTLimit--=--DRIVES-----.
         >--+---------------------------+-------------------------------><
            '-MOUNTLimit--=--+-DRIVES-+-'
                     +-number-+
                     '-0------'


Generational Compatibility:
         LTO3 drives are backwards read and write compatible with LTO
         Generation 2 media, but they are only backwards read compatible
         with LTO Generation 1 media. Thus, LTO3 drives can read and
         write to existing LTO2 media, but LTO3 drives need LTO1 media
         to be updated to READONLY. LTO1 volumes can be updated to
         READONLY by issuing the following command: 
         UPDATE VOLUME <volName> ACCESS=READONLY

         This restriction does not apply to LTO2 media, because LTO3
         drives can both read and write to LTO2 media.


SANFS Support
*************

Beginning at level 5.3.1, SAN File System (SANFS) storage may be used to
house the Tivoli Storage Manager Server database, log, and storage pool
volumes. The use of SANFS storage for LAN-free data movement is
supported for this purpose as well. In using SANFS storage with Tivoli
Storage Manager, it is recommended that SANFS be configured and working
across multiple systems before bringing Tivoli Storage Manager online.

It is important to consult the SANFS documentation on configuring
heterogeneous file system sharing, particularly with respect to userid
mapping. If a storage agent has insufficient permissions to access files
created by a server, there will be volume mounting and/or access
failures.

Permissions can be checked by using command line facilities such as echo
and ls to create and view files and their permissions on each system.
Use the system userid that the server will be using and then check the
permissions from storage agent systems, with the system userid that the
storage agent will be using. If each system can read and write files
created by the other, the permission and userid mappings should be in
order. It is especially important to note that a Windows storage agent
will not be able to share files with a UNIX server in a SANFS
environment without setting up userid mapping.


SUN Storage Agent Documentation for addtoinit (APAR IC43928)
************************************************************

The storage agent is configured to start automatically at the time of
installation. An entry is made to the inittab that enables this
automatic startup. The following scripts (located in the storage agent
installation directory) allow you to modify the inittab. 

addtoinit (or addtoinit console)
         Adds an entry to the inittab that redirects output to
         /dev/console and enables automatic startup. For example: 
         aa:234:once:/opt/tivoli/tsm/StorageAgent/bin/dsmsta.rc >/dev/console 
         2<>/dev/console


addtoinit null
         Adds an entry to the inittab that redirects output to /dev/null
         and enables text based login to the console. For example: 
         aa:234:once:/opt/tivoli/tsm/StorageAgent/bin/dsmsta.rc >/dev/null


addtoinit saved
         Restores the inittab entry from <storage agent home
         directory>/oldinit to /etc/inittab. If more than one entry
         exists in the /etc/inittab file, addtoinit saved restores the
         first entry only.

removefrominit
         Removes any entry that refers to <storage agent home
         directory>/dsmsta.rc and records these entries in a file called
         <storage agent home directory>/oldinit. If more than one entry
         exists in the /etc/inittab file, removefrominit stores all
         entries in the oldinit file.


Tivoli Storage Manager 5.3.1 Server Modified to use Centera Version 2.3
***********************************************************************

To use Centera Version 2.3, ensure that a shared library environment
variable is available during system startup. Work with your UNIX System
Administrator to ensure this variable is set. Perform this step prior to
starting the Tivoli Storage Manager 5.3.1 server. For example:

AIX : LIBPATH
Sun : LD_LIBRARY_PATH_64
HP  : SHLIB_PATH


*******************************************************************************
* Updates for Version 5.3.0                                                   *
*******************************************************************************

Applying Tivoli Storage Manager Updates for AIX
***********************************************

This section describes how to use Tivoli Storage Manager maintenance
updates with AIX. These updates, also referred to as fixpacks, bring
your server up to the current maintenance level. Use the System
Management Interface Tools (SMIT) to apply the updates. To view a list
of the latest maintenance and download fixes, visit
www.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html.
Note that The Tivoli Storage Manager server must not be running during
maintenance updates.


Before Applying Maintenance Updates

Maintenance updates may contain README files that provide a summary of
changes for the fixpack. Review this information before you apply the
update. If required, a DSMSERV UPGRADEDB operation is automatically
performed when maintenance is applied.

1. Mount the CD-ROM by entering from the root directory:

   +-------------------------------------------------------------------+
   |  crfs -v cdrfs -d /dev/cd0 -m /cdrom -pro                         |
   |                                                                   |
   |  mount /cdrom                                                     |
   +-------------------------------------------------------------------+

2. Change to a directory where you have write permission. For example,
   to change to the /home/temp directory, enter:

   +-------------------------------------------------------------------+
   |cd /home/temp                                                      |
   +-------------------------------------------------------------------+

3. List the contents of the PTF using the RESTORE command. For example:

   +-------------------------------------------------------------------+
   |restore -Tvf /cdrom/u452223.bff                                    |
   +-------------------------------------------------------------------+

4. Note the relative location of any README files. For example:

   +-------------------------------------------------------------------+
   |./usr/tivoli/tsm/server/bin/README.SRV                             |
   |./usr/tivoli/tsm/devices/bin/README.DEV                            |
   +-------------------------------------------------------------------+

5. Restore the README file. For example:

   +----------------------------------------------------------------------+
   |restore -xvf /cdrom/u452223.bff ./usr/tivoli/tsm/server/bin/README.SRV|
   +----------------------------------------------------------------------+

6. Change to the directory containing the README and use your favorite
   browser to view the contents.


Using SMIT to Install Maintenance Updates on AIX

Installation will be stopped and an error message displayed if an active
server or storage agent process is detected. All active server or
storage agent processes must be halted before installation can proceed.

Complete the following procedure to apply maintenance updates on the AIX
system by using SMIT.

Note: To use SMIT to apply maintenance updates on AIX, you must be root
      user and have disk space available. SMIT can be run from the AIX
      command line or from the command line of an xterm or desktop
      window. The server must be halted before you begin this procedure.
      It is strongly recommended that you do not commit the update until
      you are confident that the server is operating properly.

1. Log in as the root user. 

   Note: To access the X Windows environment, enter: xinit.

2. Enter:

   +-------------------------------------------------------------------+
   |smit                                                               |
   +-------------------------------------------------------------------+

3. To see a list of authorized program analysis reports (APAR)s to
   select, choose the following selections from within SMIT: 

   +-------------------------------------------------------------------+
   |   Software Installation and Maintenance                           |
   |      Install and Update Software                                  |
   |         Install and Update from All Available Software            |
   +-------------------------------------------------------------------+

4. On the next window, select the device that you are using for the
   installation. You can enter the drive name in the window or click on
   List to access the device list. If you click on List, select the
   device that you are using (for example, /dev/cd0).

   Note: The status of the drive that you select must be Available. Do
         not use /dev/mtx for SMIT installations.

5. Click Do.

6. Place the cursor in "Software to Install" and press the F4 function
   key to list the available updates.

7. Select the updates you wish to install.

8. Check the default settings for the options on this window. Note that
   committing the software prevents removal of Tivoli Storage Manager
   from the system, and prevents you from rejecting the Fixpack and
   returning to the previous level.

9. Check the default settings for all of the options.

10. Click OK to continue. This installation may take several minutes.

11. After the installation is complete, click on Done, remove the
   CD-ROM, and exit from SMIT.


DATEFORMAT, TIMEFORMAT, and NUMBERFORMAT Server Options
*******************************************************

The server options DATEFORMAT, TIMEFORMAT, and NUMBERFORMAT are
described in the IBM Tivoli Storage Manager Reference publication and
appear in the output of the QUERY OPTIONS server command. However, these
options are available and supported only on servers running on MVS. Date
format, time format, and number format for other platforms are retrieved
from the operating system and cannot be user specified in the server
options.


Default Option and Command Parameter Changes
********************************************

This release contains changes to defaults for some option file entries
and parameters for some commands. The changes are listed below. Consult
the Tivoli Storage Manager Administrator's Reference for your platform
for information on effects of these options and parameters.

1. Options File (dsmserv.opt) Default Changes

The following option file defaults were changed. If you do not have
these options specified in your options file, you will automatically
pick up the new options and no action is required on your part. If you
have these options specified, then you should check them, and determine
if any changes should be made. 

Table 3. Changed Defaults
+-----------------------+----------------------+----------------------+
| Option                | Previous Default     | New Default          |
+-----------------------+----------------------+----------------------+
| BUFPOOLSIZE           | 2048 (KB)            | 32768 (KB)           |
+-----------------------+----------------------+----------------------+
| MOVEBATCHSIZE         | 40 (objects)         | 1000 (objects)       |
+-----------------------+----------------------+----------------------+
| MOVESIZETHRESH        | 500 (MB)             | 500 (MB)             |
+-----------------------+----------------------+----------------------+
| TCPADMINPORT          | 1500                 | value of TCPPORT     |
+-----------------------+----------------------+----------------------+
| TCPBUFSIZE (AIX Only) | 16 (KB)              | 32 (KB)              |
+-----------------------+----------------------+----------------------+
| TCPNODELAY            | NO (YES for storage  | YES                  |
|                       | agent)               |                      |
+-----------------------+----------------------+----------------------+
| TCPWINDOWSIZE         |                      | 63 (KB)              |
+-----------------------+----------------------+----------------------+
| TXNGROUPMAX           | 40 (objects)         | 256 (objects)        |
+-----------------------+----------------------+----------------------+
| ADMINONLIENTPORT      | new option           | YES                  |
+-----------------------+----------------------+----------------------+

The options SELFTUNETXNSIZE, USELARGEBUFFERS, AIXDIRECTIO were removed.
If you have them specified in your options file, they will no longer
have an effect, but no error messages will be issued. They should be
removed from your options file.

2. Command Parameter Changes

The default for parameters for the following commands were changed. Any
scripts or scheduled commands using these commands should be reviewed to
see if any changes are required. See the Tivoli Storage Manager
Administrator's Reference for your platform for more information on
these commands and parameters.

For the DEFINE DEVCLASS xxxxxxx DEVTYPE=FILE command, the MAXCAPACITY
and MOUNTLIMIT parameter defaults were changed. This only affects the
FILE device type. The new MAXCAPACITY default is 2GB for all platforms.
The previous MAXCAPACITY default ranged from 1MB to 4MB depending on the
platform. The new MOUNTLIMIT default is 20 for all platforms. The
previous MOUNTLIMIT default was 1 or 2 depending on the platform.

For the DEFINE STGPOOL xxxxxx <sequentialDevtype> POOLTYPE=PRIMARY
command, the COLLOCATE parameter default has changed. This change does
not affect DISK or sequential access COPY storage pools. The new default
for COLLOCATE is GROUP, the old default was NO.

For the MOVE DATA and MOVE NODEDATA commands, the default for the
RECONSTRUCT parameter has changed for moves involving only sequential
storage pools. This change does not affect MOVE commands when either the
source or target storage pool is DISK. The new default for RECONSTRUCT
is YES. The previous default was NO.


Device Driver Installation Fix for HP-UX
****************************************

In Version 5.2.2, the Tivoli Storage Manager device driver became a
dynamically loadable kernel module (DLKM). Since then, there have been
reports that in some installations, following a reboot, HP-UX does not
assign the Tivoli Storage Manager tape driver to devices that it had
been assigned to before the reboot. Until a permanent fix for this is
available from HP, Tivoli Storage Manager will install a startup
execution script, tsmscsi. This script is installed into /sbin/init.d
and symlinked to /sbin/rc3.d/S501tsmscsi, which causes
/sbin/init.d/tsmscsi to run when the system boots into run-level 3.

The use of this script is optional and might not be necessary for every
installation. As it is shipped, the script simply returns without doing
any work. However, if devices are no longer claimed by the Tivoli
Storage Manager device driver following a reboot of the machine, this
script can be used to reclaim them. The /sbin/init.d/tsmscsi script is
meant to be edited to add the commands to claim devices with the Tivoli
Storage Manager device drivers.

1. Claiming a Device

Add a specific device claim here. For example: 

/opt/tivoli/tsm/devices/bin/tsmddcfg 0/3/0/0.5.1
/opt/tivoli/tsm/devices/bin/tsmddcfg 0/6/0/0.1.30.255.0.0.1

If no lines are uncommented, this script simply returns. Follow the
example (uncommented) to invoke: 

/opt/tivoli/tsm/devices/bin/tsmddcfg

This line is followed by the hardware path of a single device to be
claimed by the Tivoli Storage Manager device driver. Each device
requires its own line.


ENABLE and DISABLE SESSIONS Command Enhancements
************************************************

The commands ENABLE SESSIONS and DISABLE SESSIONS have been enhanced to
allow greater flexibility in which session types are affected. The
syntax enhancements to the commands are: 

ENABLE SESSIONS

                      .-CLIent----.
>>-ENable SESSions----+-----------+-><
                      +-CLIent----+
                      +-ALL-------+
                      +-SERVer----+
                      '-ADMin-----'

The default behavior is to enable sessions for clients. This parameter
is optional. The default value is CLIent. Possible values are: 

CLIent
   Enables only backed-up and archived client sessions.

ALL
   Enables all session types.

SERVer
   Enables only server-to-server sessions.

ADMin
   Enables only administrative sessions.


DISABLE SESSIONS

                      .-CLIent----.
>>-DISAble SESSions----+-----------+-><
                      +-CLIent----+
                      +-ALL-------+
                      +-SERVer----+
                      '-ADMin-----'

The default behavior is to disable sessions for clients. This parameter
is optional. The default value is CLIent. Possible values are: 

CLIent
   Disables only backed-up and archived client sessions.

ALL
   Disables all session types.

SERVer
   Disables only server-to-server sessions.

ADMin
   Disables only administrative sessions.


Enhanced Performance of Incremental Export
******************************************

Beginning with Tivoli Storage Manager Version 5.3, an incremental export
operation (export with a FROMDATE) will no longer export files that were
inserted prior to the FROM Date only to be discarded during the import
operation on the target server. These files were exported to ensure that
their corresponding versions on the target server were deactivated. The
export function has been modified to only send to the target server the
necessary information needed to deactivate files which have become
inactive on the source.


New Server Option SANDISCOVERY
******************************

A new server option, SANDISCOVERY, is now available. This option is used
to enable and disable the Tivoli Storage Manager server SAN discovery
function. If the SANDISCOVERY option is enabled, the Tivoli Storage
Manager server will perform SAN discovery during server initialization
and when the device path has been changed. Using this SAN discovery
function, the Tivoli Storage Manager server can automatically correct
the device's special file name if it has been changed.

The Tivoli Storage Manager server does not require persistent binding
with the SAN discovery function enabled. Users can also issue the server
command, QUERY SAN, to display all the devices seen by the Tivoli
Storage Manager server.

Syntax:

>>-SANDISCOVERY----+-ON---+-><
                   '-OFF--'

Parameters

ON 
   With this option specified, the server will perform SAN discovery
   during server initialization, when the device path has been
   changed, or when the QUERY SAN command is issued.

OFF
   With this option specified, the server will not perform SAN discovery
   during the server initialization, when the device path has been
   changed, or when the QUERY SAN command is issued.

For example:

sandiscovery on

The default value is: 
*  ON for Windows systems
*  OFF for all other platforms (AIX, LINUX, HP-UX, Solaris)


SET WEBAUTHTIMEOUT Command
**************************

The server still accepts the SET WEBAUTHTIMEOUT command, and the QUERY
STATUS command still displays a value for "WEB Admin Authentication
Time-out" even though the web administrator interface is no longer
supported. Both will be removed in future server maintenance.


Storage Agent Use of Client Option LANFREETCPSERVERADDR
*******************************************************

When the storage agent uses a network to talk to the server that is
different than the network the client uses to talk to the server, the
LANFREETCPSERVERADDR function will not work. The issue is that the
server address as reported by the client to the storage agent is not
appropriate for the client to use to communicate with the server.

A work around to allow using multiple networks for the server and
storage agent is to manipulate the operating system hosts files. For a
UNIX client, the /etc/hosts file would be altered. For a Windows client,
the file would be \WinNT\system32\drivers\etc\hosts. Define a host name
on each machine pointing to the Tivoli Storage Manager server. Define
each with an IP address that can be used to point to the Tivoli Storage
Manager server on the proper network. The Tivoli Storage Manager client
can then find that server if that name is used on the storage agent high
level communication address definition.


Support for the QUERY SAN Command and SAN Discovery
***************************************************

1. AIX

The ability to accurately define SAN devices on the server and storage
agent relies upon functionality provided by AIX. In particular, fileset
devices.common.IBM.fc.hba-api provides a 32-bit and 64-bit API for use
by Tivoli Storage Manager. During product testing, an error was found in
the 64-bit version of the library (/usr/lib/libHBAAPI.a) shipped with
this AIX fileset. As a result, the server and storage agent for AIX will
check the level of the fileset to determine whether to load the library.

For AIX 5.2, this fileset must be AT or LATER than 5.2.0.30 for 32-bit,
and LATER than 5.2.0.30 for 64-bit. (5.2.0.30 64-bit HAS the error). For
AIX 5.3, the base level (5.3.0.0) is sufficient for 32-bit but not for
64-bit. You must have a fileset LATER than the base fileset for 64-bit.
The EXPECTED level of this fileset that corrects the problems is
5.2.0.50 for AIX 5.2 and 5.3.0.10 for AIX 5.3.

If the server or storage agent cannot load the library or the library is
missing, it will issue message ANR8226E. If the library is not at the
minimum required level, it will issue message ANR8227E. With any of
these messages, the QUERY SAN command will show no information and SAN
discovery will not be performed. For the list of supported HBAs and
required driver levels by operating system go to
http://www.ibm.com/support and search on keyword TSMHBA.

After the fileset has been updated to the desired level, please perform
the following set option command to enable SAN discovery: 

setopt SANDISCOVERY ON


2. Windows 2003 with Emulex Fibre Channel HBA

There is no support for SAN discovery for Emulex Fibre Channel HBA on
Windows 2003 until the problem with the Emulex device driver is
resolved. The Windows 2003 platform is not supported for now, although
the SANDISCOVERY option defaults to YES.

A message will be issued when the SAN discovery is invoked: 

ANR1793W TSM SAN discovery is not supported on this platform or this 
version of OS.

For the list of supported HBAs and required driver levels by operating
system go to http://www.ibm.com/support and search on keyword TSMHBA.


3. Windows 2003 with Qlogic Fibre Channel HBA

There is no support for SAN discovery for Qlogic Fibre Channel HBA on
Windows 2003 until a problem with Microsoft is resolved. The Windows
2003 platform is not supported for now although the SANDISCOVERY option
defaults to YES. For the list of supported HBAs and required driver
levels by operating system go to http://www.ibm.com/support and search
on keyword TSMHBA.


4. Windows 2000 with IBM LTO Tape Devices

A problem in some levels of the IBM LTO Gen-2 tape firmware can cause
the SAN discovery to fail. Please use the LTO Gen-2 tape firmware level
4772 or beyond from IBM support web site at http://www.ibm.com/support
to avoid this problem.


5. Windows 2000 with Unsupported SAN Data Gateway

There have been problems with obsolete SAN Data Gateways, for example:
SDG 2108. The gateway may respond "QUEUE FULL" status to the SCSI
command during SAN discovery and cause it to fail. The only way to
resolve this is to replace these devices with an IBM supported gateway.
For the list of supported HBAs and required driver levels by operating
system go to http://www.ibm.com/support and search on keyword TSMHBA.


6. Linux with IBM Tape Devices

Due to a problem in the IBM tape device driver for Linux, Tivoli Storage
Manager will not be able to discover some of the IBM device's path. This
affects the Tivoli Storage Manager QUERY SAN and SAN discovery function.
The problem has been fixed by IBM tape device driver for Linux. 
*  For kernel 2.4, the fix is in IBM Tape device driver level 1.5.6
*  For kernel 2.6, the fix is in IBM Tape device driver level 2.0.1

The IBM device driver for Linux 2.4.x kernel supports a maximum of 64
tape drives and 64 medium changers. The QUERY SAN command will not be
able to display the special file names for those devices beyond the IBM
device driver's range. The special file names for those devices in the
QUERY SAN command output will be left blank. Upgrade the Linux kernel to
2.6.x to resolve this problem.


7. Sun Solaris with IBM Tape Devices

Due to a change made in the IBM tape device driver for Solaris, the
older version of the device driver will keep 10 bytes of the library
serial number. But, the new version of the IBM tape device driver will
keep all 16 bytes provided by the IBM tape library. The result is that
Tivoli Storage Manager SAN discovery will keep 16-byte serial numbers
since they are obtained by the HBA via the HBAAPI function. 

This will cause a serial number mismatch between current library 
operations and the Tivoli Storage Manager database (10 bytes only). The 
Tivoli Storage Manager SAN discovery operation will not be able to 
discover and find tape libraries with 10-byte serial numbers. As a result, 
the library operation will fail.

To correct this problem: 

1. Install the IBM tape device driver for Sun Solaris 4.1.0.2 or beyond.
   This will take all 16 bytes of the tape library serial number.

2. Issue the following Tivoli Storage Manager command to replace the old
   10-byte serial number with the new 16-byte serial number in the
   Tivoli Storage Manager database: 
   update library libraryName serial=autodetect


8. Linux for pSeries

To find the Emulex HBA driver, go to http://www.emulex.com and click on
"drivers, software, and manuals", under HBAs installed on OEM equipment,
select vendor IBM. Then, select the HBA model.


9. JNI Fibre Channel HBA on Solaris

There is no support for SAN discovery for JNI Fibre Channel HBA on
Solaris until the problem with JNI is resolved. The option SANDISCOVERY
defaults to NO for this platform. If you change SANDISCOVERY to YES, the
QUERY SAN and SAN discovery will not obtain correct data. For the list
of supported HBAs and required driver levels by operating system, go to
http://www.ibm.com/support and search on keyword TSMHBA.


10. ANY Fibre Channel HBA on Linux for zSeries or HP-UX

There is no support for SAN discovery on Linux for zSeries or the HP-UX
platform. A message will be issued when the SAN discovery is invoked: 

ANR1793W TSM SAN discovery is not supported on this platform or this 
version of OS.


Using Shared Memory Communications on Linux
*******************************************

Shared memory communications on all UNIX platforms require the use of
IPC message queues. Four message queues are used for each concurrent
session. In some Linux environments, the system-wide limit on the number
of message queues may be very small, thus limiting the number of
concurrent shared memory sessions.

To determine the current system-wide limit, you can: 

1. Issue the following command and look for the maximum number of queues
   system wide:
   ipcs -l

    OR issue:
   /sbin/sysctl kernel.msgmni

If this number is less than 256, you might want to increase it to at
least 256. To increase the maximum number of system-wide message queues,
you can change the current kernel with the echo command as follows: 

# echo "256" >/proc/sys/kernel/msgmni

OR 

# /sbin/sysctl -w kernel.msgmni="256"

To make the change permanent, add the following 3 lines to the
/etc/sysctl.conf file:

# Sets maximum number of message queues to 256
# Set this to 1024 or higher on production systems
kernel.msgmni = 256


Windows: Performing a Silent Installation
*****************************************

This section describes how to perform a silent IBM Tivoli Storage
Manager installation. A silent installation runs unattended, requiring
no monitoring or dialog box input. No installation wizards appear.
Silent installation is run by using the MSIEXEC command from the command
line interface, or by incorporating the MSIEXEC command into a command
file. The command file can also be used to combine a silent installation
of the server with a configuration of the server.

You can use the silent installation method to ensure consistent
configuration if you are installing IBM Tivoli Storage Manager on
multiple computers with identical hardware. For example, if you have
multiple servers in different locations, you can produce and distribute
a CD containing the same silent installation package for each server.
You can also place a silent installation package on a file server for
distribution over a network.

Because Tivoli Storage Manager is based on the Microsoft Windows
Installer technology, all of the components can be deployed using Active
Directory and Group Policy. For more information on deploying Tivoli
Storage Manager using Group Policy, refer to the Windows 2000 online
help.


1. Installing the Server

The MSIEXEC command is used to silently install the Tivoli Storage
Manager server, licenses, client, and device driver from the command
line. Each of these components should be installed separately by
specifying its respective feature information from the feature tables.

The source file of each component can be identified by its .msi
extension. These files are located on the product CD.

For more information about the MSIEXEC command, refer to Microsoft
documentation.

The following is an example of installing the Tivoli Storage Manager
server using the MSIEXEC command for a silent installation. Explanations
of the parameters follow the example.

Command  
         msiexec /i "c:\tsm_images\TSMSRV52_WIN\TSM32\server\IBM Tivoli 
         Storage Manager Server 5.3.0.0.msi" RebootYesNo="No"
         REBOOT="Suppress" ALLUSERS=1 INSTALLDIR="e:\program 
         files\tivoli\tsm" ADDLOCAL="Server32,Console32"
          TRANSFORMS=1033.mst /qn /l*v "c:\server_log.txt"

/i       Specifies an installation.

"c:\tsm_imagesTSMSRV52_WIN\TSM32\server\IBM Tivoli Storage Manager 
Server 5.3.0.0.msi"
         Specifies the complete path to the server source package. Look
         for the actual source package on the product CD. It will have
         an .msi extension.

RebootYesNo="No" REBOOT="Suppress"
         Specifies that a reboot should not be performed. Except for the
         Tivoli Storage Manager device driver, it is recommended that
         you not allow a reboot of your machine when using silent
         installation.

ALLUSERS=1 
         Specifies that the package is for all users. This parameter is
         required.

INSTALLDIR="c:\program files\tivoli\tsm"
         Specifies the destination path. If Tivoli Storage Manager is
         already installed on the system and you are upgrading your
         server, the existing path will be used as the destination path.

ADDLOCAL="Online_Main,Online_Server_Readmes,Online_Server, Server_Base"
         Specifies the list of features to install. Feature list should
         be "Server32,Console32" for example. See Table 4 for a complete
         list.

TRANSFORMS=1033.mst
         Specifies the language transform to use. See Table 11 for a
         complete list.

/qn      Specifies that this is a silent install.

/l*v "c:\install_log.txt"
         Specifies verbose logging and the name and location of the
         Tivoli Storage Manager installation log file.


2. Installing the Licenses

The following is an example of installing the Tivoli Storage Manager
licenses using the MSIEXEC command for a silent installation. Note that
only the source package name and the ADDLOCAL parameter are different
from the server install example.

Command  
         msiexec /i "c:\tsm_images\TSMSRV52_WIN\TSM32\server\IBM Tivoli 
         Storage Manager Server 5.3.0.0.msi" RebootYesNo="No"
         REBOOT="Suppress" ALLUSERS=1 
         INSTALLDIR="e:\program files\tivoli\tsm" ADDLOCAL="License32,License64" 
         TRANSFORMS=1033.mst /qn /l*v "c:\license_log.txt"


3. Installing the Backup-Archive Client

The following is an example of installing the Tivoli Storage Manager
backup-archive client using the MSIEXEC command for a silent
installation. Note that only the source package name and the ADDLOCAL
parameter are different from the server install example. Also note that
this example should be modified when installing a Tivoli Storage Manager
Backup-Archive Client Language Pack.

Command  
         msiexec /i "Z:\tsm_images\TSM_BA_Client\baclient\Tivoli Storage Manager
         Client.msi" RebootYesNo="No"
         REBOOT="Suppress" ALLUSERS=1 INSTALLDIR=
         "e:\program files\tivoli\tsm" ADDLOCAL="BackupArchiveGUI,BackupArchiveWeb
         ,ApiRuntime,AdministrativeCmd,Image,OFS,Online_Client_Readmes"  
         TRANSFORMS=1033.mst /qn /l*v "c:\client_log.txt"


4. Installing the Device Driver

The following is an example of installing the Tivoli Storage Manager
device driver using the MSIEXEC command for a silent installation. Note
that only the source package name and the ADDLOCAL parameter are
different from the server install example.

Command  
         msiexec /i "c:\tsm_images\TSMSRV52_WIN\TSM32\server\IBM Tivoli 
         Storage Manager Server 5.3.0.0.msi" RebootYesNo="No"
          REBOOT="Suppress" ALLUSERS=1
         INSTALLDIR="e:\program files\tivoli\tsm"
         ADDLOCAL="DeviceWin2k,DeviceNet32,DeviceNet64"
         TRANSFORMS=1033.mst /qn /l*v "c:\driver_log.txt"


5. Installing the Language Packs

The following is an example of installing the Tivoli Storage Manager
language packs using the MSIEXEC command for a silent installation. Note
that only the source package name and the ADDLOCAL parameter are
different from the server install example.

Command  
         msiexec /i "C:\tsm_images\TSM52_WIN\Common\langpack\lang_fra\
         IBM Tivoli Storage Manager 5.3.0.0 - French.msi" 
         RebootYesNo="No" REBOOT="Suppress" ALLUSERS=1
         INSTALLDIR="e:\program files\tivoli\tsm"
         ADDLOCAL="fra_console,fra_server"
         TRANSFORMS=1033.mst /qn /l*v "c:\driver_log.txt"


6. Installing the Storage Agent

The following is an example of installing the Tivoli Storage Manager
storage agent using the MSIEXEC command for a silent installation. Note
that only the source package name and the ADDLOCAL parameter are
different from the server install example.

Command  
         msiexec /i "C:\tsm_images\TSM52_WIN\TSM32\Stagent\
         IBM Tivoli Storage Manager Storage Agent 5.3.0.0.msi" 
         RebootYesNo="No" REBOOT="Suppress" ALLUSERS=1
         INSTALLDIR="e:\program files\tivoli\tsm"
         ADDLOCAL="Console32,StorageAgent32"
         TRANSFORMS=1033.mst /qn /l*v "c:\driver_log.txt"


7. Feature Tables

Table 4. Server Features and Feature Descriptions

  Server Feature           | Description
 --------------------------+------------------------------------------
  Server32                 | 32-bit package
 --------------------------+------------------------------------------
  Server64                 | This feature only available on 64-bit
                           | package
 --------------------------+------------------------------------------
  Console32                |

Table 5. Server License Feature and Feature Description

  Server License Feature   | Description
 --------------------------+------------------------------------------
  License32                | Server License
 --------------------------+------------------------------------------
  License64                | Server License. This feature is only
                           | available in the 64-bit license package.

Table 6.  Backup Archive Client Features and Feature Descriptions

  Client Feature           | Description
 --------------------------+------------------------------------------
  BackupArchiveGUI         | BA Graphical User Interface
 --------------------------+------------------------------------------
  BackupArchiveWeb         | BA Web Client
 --------------------------+------------------------------------------
  ApiRuntime               | API Runtimes
 --------------------------+------------------------------------------
  ApiSdk                   | API SDK
 --------------------------+------------------------------------------
  AdministrativeCmd        | Administrative Command Line
 --------------------------+------------------------------------------
  Readmes                  | Client Readmes and HTMLHelp Book
 --------------------------+------------------------------------------
  BooksPdf                 | PDF Book

Table 7. Client Language Pack Features and Feature Descriptions

  Client Language Pack     | Feature Description
  Features                 |
 --------------------------+------------------------------------------
  LanguageFiles            | Language-specific files

Table 8. Device Driver Features and Feature Descriptions

  Device Driver Feature    | Description
 --------------------------+------------------------------------------
  DeviceWin2k              | Only available on 32-bit package
 --------------------------+------------------------------------------
  DeviceNet32              | Only available on 32-bit package
 --------------------------+------------------------------------------
  DeviceNet64              | Only available on 64-bit package

Table 9. Storage Agent Features and Feature Descriptions

  Storage Agent Feature    | Description
 --------------------------+------------------------------------------
  Console32                | Only available on 32-bit package
 --------------------------+------------------------------------------
  StorageAgent64           | Only available on 64-bit package

Table 10. Language Pack Features and Feature Descriptions

  Language Pack Feature    | Description
 --------------------------+------------------------------------------
  chs_server               | Simplified Chinese language support
 --------------------------+------------------------------------------
  chs_console              | Simplified Chinese language support
 --------------------------+------------------------------------------
  cht_server               | Traditional Chinese language support
 --------------------------+------------------------------------------
  cht_console              | Traditional Chinese language support
 --------------------------+------------------------------------------
  deu_server               | German language support
 --------------------------+------------------------------------------
  deu_console              | German language support
 --------------------------+------------------------------------------
  esp_server               | Spanish language support
 --------------------------+------------------------------------------
  esp_console              | Spanish language support
 --------------------------+------------------------------------------
  fra_server               | French language support
 --------------------------+------------------------------------------
  fra_console              | French language support
 --------------------------+------------------------------------------
  itn_server               | Italian language support
 --------------------------+------------------------------------------
  itn_console              | Italian language support
 --------------------------+------------------------------------------
  jpn_server               | Japanese language support
 --------------------------+------------------------------------------
  jpn_console              | Japanese language support
 --------------------------+------------------------------------------
  kor_server               | Korean language support
 --------------------------+------------------------------------------
  kor_console              | Korean language support
 --------------------------+------------------------------------------
  ptb_server               | Portuguese language support
 --------------------------+------------------------------------------
  ptb_console              | Portuguese language support

Table 11. Transform and Language

  Transform                | Language
 --------------------------+------------------------------------------
  1028.mst                 | CHT Traditional Chinese
 --------------------------+------------------------------------------
  1031.mst                 | DEU German
 --------------------------+------------------------------------------
  1033.mst                 | ENG English
 --------------------------+------------------------------------------
  1034.mst                 | ESP Spanish
 --------------------------+------------------------------------------
  1036.mst                 | FRA French
 --------------------------+------------------------------------------
  1040.mst                 | ITA Italian
 --------------------------+------------------------------------------
  1041.mst                 | JPN Japanese
 --------------------------+------------------------------------------
  1042.mst                 | KOR Korean
 --------------------------+------------------------------------------
  1046.mst                 | PTB Portuguese
 --------------------------+------------------------------------------
  2052.mst                 | CHS Simplified Chinese


8. Including a Custom Client dsm.opt File

Users who would like to install a predefined DSM.OPT file should place a
copy of the DSM.OPT file in the CONFIG directory located within the
install image.

tsm_images\TSM_BA_Client\baclient\Program Files\Tivoli\TSM\config.

The file must be named DSM.OPT.

The installation program will copy the predefined DSM.OPT file to the
..\BACLIENT directory when both of the following conditions are met:

*  DSM.OPT does NOT exist in the ..\BACLIENT directory on the target
   computer. The installation program will not copy over an existing
   DSM.OPT file.
*   DSM.OPT exists in the install image's CONFIG directory, as described
   above.


9. Installation Troubleshooting

Table 12. Symptoms and Resolutions

  Symptom                  | Resolution
 --------------------------+------------------------------------------
  You receive a message    | Try updating an entry in the setup.ini
  during setup indicating  | file that is included with the package.
  that you do not have     | If your package is on CD, you'll have to
  enough free space to     | copy the entire package to a hard drive
  install on a drive that  | so that you can edit setup.ini. Once
  does have free space.    | setup.ini is available on your hard
                           | drive you can edit it and change the
                           | line DiskSpace=8000 to DiskSpace=0000.
 --------------------------+------------------------------------------
  You do not see any       | Click on an empty area of the desktop
  Tivoli Storage Manager   | and press F5 to refresh the desktop
  icons on the desktop     | display.
  after an installation.   |
 --------------------------+------------------------------------------
  Near the end of the      | Click on the OK button and continue.
  installation process, a  |
  warning message box      |
  titled 'HTML 1.31        |
  Update' displays with    |
  the text, "This computer |
  already has a newer      |
  version of HTML Help."   |
 --------------------------+------------------------------------------
  Silent Installation      | Remove the /qn parameter and re-execute
  doesn't appear to work.  | your msiexec command. Any errors should
                           | be displayed. After you fix the problem
                           | add the /qn parameter again.


10. Performing a Silent Uninstall

You should stop any running Tivoli Storage Manager services before
performing an uninstallation. To see which services are running, you can
type net start in a Windows command prompt. Look for any services that
have Tivoli Storage Manager in them. If you have installed any Tivoli
Storage Manager services using your own names, look for those as well.
Each service you plan to remove should be stopped. To stop a service,
type net stop "service name." For example, to stop the first server
instance you can type net stop "tsm server1."

You can silently uninstall the Tivoli Storage Manager server, licenses,
and device driver by using the /x parameter instead of the /i parameter
for each command. All other parameters remain the same.

The following is an example of silently uninstalling the Tivoli Storage
Manager server using the MSIEXEC command.

Command  
         msiexec /x "c:\tsm_images\TSM51_Complete\server\Tivoli Storage 
         Manager Server 5.0.msi" RebootYesNo="No" REBOOT="Suppress" 
         ALLUSERS=1 INSTALLDIR="c:\program files\tivoli\tsm"
         ADDLOCAL="Online_Main,Online_Server_Readmes,Online_Server,
         Server_Base" TRANSFORMS=1033.mst /qn /l*v c:\install_log.txt


z/OS Device Class Attribute Clarification
*****************************************

On z/OS systems, the COMPRESSION parameter for ECARTRIDGE and 3592
device types is ignored and does not generate an error message when
specified. This fix pack level of code continues to ignore the
COMPRESSION parameter. The defining or updating of the device class for
these device types is successful when COMPRESSION is specified.

The ECARTRIDGE and 3592 device types specify compression using the
FORMAT parameter. See the Administrator's Reference, or use the online
help to determine the format values that will enable compression.

Definitions and updates for ECARTRDIGE device types will accept T9840CC
or T9840C-C on the FORMAT paramter when requesting T9840C with
compression. This fix pack allows the T9840CC value to be processed is
if T9840C-C was specified.


*******************************************************************************
* Known Limitations                                                           *
*******************************************************************************

Updates for Fixpack 5.3.2

Automatically Restarting a Restore on the Tivoli Storage Manager Client
***********************************************************************

The Tivoli Storage Manager client will automatically restart backup and
restore operations in the event it loses a session with the TSM server.
This can happen for any number of reasons including a cluster failover.

The amount of time it takes the client to re-establish the session
depends in part on the way the connection is broken. If a Tivoli Storage
Manager client backup or restore is in progress and the server is halted
and then restarted, as would be the case in a cluster failover, then the
client will quickly re-establish the session and continue from where it
left off. 

If, however, the ethernet cable is disconnected from the server, a 
restore session will take approximately two hours to re-establish the 
connection after the ethernet cable has been reconnected. The reason for 
this is because the Tivoli Storage Manager client uses the SO_KEEPALIVE 
socket option, which enables periodic transmissions on a connected socket, 
when no other data is being exchanged. The default value for SO_KEEPALIVE 
option is two hours.

Normally this will not be a problem as unattended restores are not
typical with Tivoli Storage Manager and it is even less likely that this
type of network error would occur during an unattended restore. However,
if the two hour default is too long in your environment you can use the
procedure below to change the default value for SO_KEEPALIVE on Windows
2000, 2003, and XP. 

Note: This procedure modifies the Windows registry. You should exercise
      great caution anytime you edit the registry because accidentally
      changing the wrong value in the registry can cause your computer
      to fail to boot and data may be lost.

To change the default value for SO_KEEPALIVE on Windows 2000, 2003, and
XP, complete the following steps. 

1. Start regedit and add a DWORD KeepAliveTime to the
   HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters key.

2. Enter the number of milliseconds to use for the KeepAliveTime 
   parameter. If you would like to change the value to five minutes you
   can set the value to 300000 (decimal).

3. After you have made the change you will need to reboot your system in
   order for the change to take effect.

Once this change is made, the Tivoli Storage Manager client will
re-establish the session after the amount of time you have specified
elapses.


Issues Related to Configuring a Tivoli Storage Manager Server in a 
Windows Cluster
******************************************************************

Some issues related to configuring a Tivoli Storage Manager server in a
Windows cluster have be discovered. Here are some tips on what to do if
you encounter problems configuring the server in a cluster. Fixes will
be made available in an upcoming version of the Tivoli Storage Manager
server on Windows.


1. Cluster Wizard: Failure to Register the Tivoli Storage Manager Resource 
Type

The Tivoli Storage Manager server resource type may fail to register
because of two missing DLLs in the server installation package. The
error may be displayed as the following error message: 

ANRU1178E Unable to register TSM Cluster DLLs with the MSCS
  cluster. Reason: The specified module could not be found.

The two DLLs are: 
*  MFC71U.DLL
*  MSVCR71.DLL

These DLLs may already exist on your system. To find out, you can open a
windows command prompt and issue the following: 

dir %systemroot%\system32\mfc71u.dll
dir %systemroot%\system32\msvcr71.dll

If they do not exist, the easiest and recommended way to obtain them is
to install the Tivoli Storage Manager Version 5.3 Backup-Archive client
on the same cluster nodes as the server. Or, you can issue the following
commands (update the source path in the following statements if needed):

copy "c:\program files\tivoli\tsm\console\mfc71u.dll" %systemroot%\cluster
copy "c:\program files\tivoli\tsm\console\msvcr71.dll" %systemroot%\cluster

When all nodes have been updated, start the Tivoli Storage Manager
server from the cluster administrator.


2. User Account Error When Performing Cluster Configuration

The Tivoli Storage Manager server initial configuration wizard may
suggest that you use a name with a space in it. For example, the
suggested server name may be tsm server1_server1.

Server names may not contain spaces. If a server name with a space in it
is used it will cause the server initialization to fail. However, the
only indication of the failure will be that subsequent operations fail.
To avoid this, ensure that no spaces are included in server names. To
fix the name shown above you could change it to tsm_server1.

See "Appendix A, Configuring and Managing Clusters," in the Tivoli
Storage Manager for Windows Administrator's Guide for more information.


Using a Disaster Recovery Plan Created on a SUSE Linux Platform
***************************************************************

If you are preparing to run a disaster recovery plan file and the server
that generated the plan file runs on the SUSE Linux platform, it is
recommended that you create this file from the same machine that has the
server to be recovered.

Use the Q RPFC command from the admin client or copy and paste from the
Administration Center display to create the file. Do this from the same
SUSE Linux machine on which you will be running the disaster recovery
plan file. If this recommendation is not followed, it is possible that
errors could occur during the plan file explode process due to garbage
characters that may appear after the file transfer from another
platform.


Updates for Fixpack 5.3.1

QUERY NODE Limitation
*********************

When using the FORMAT=DETAILED parameter for the QUERY NODE command,
some invalid information is displayed when the last operation for the
node uses multiple sessions. The values displayed as percentages for
Idle Wait, Comm. Wait, and Media Wait are not valid; they are the sum of
the total time for each wait on all sessions, as a percentage of the
duration. The duration displayed is for the last master session.

If multiple master sessions occurred because the original master session
ended after exceeding the idle wait time, being cancelled, or ending for
some other reason, the duration will only be for the time of the last
session. The QUERY NODE duration, and Idle, Comm., and Media Wait
percentages will not be accurate unless RESOURCEUTILIZATION 1 is used in
the client options.

To obtain accurate statistical information, use other sources such as
accounting records, records logged by client sessions, or the contents
of the summary table, which are available through SQL queries.

This problem occurs on all platforms and all levels of the server.


Updates for Fixpack 5.3.0

LAN-free Shared Files in a Root Directory for Version 5.3
*********************************************************

For 5.3.0 storage agents, there is a problem sharing FILE volumes that
are located in the root directory of a partition. The DIRECTORY
parameter of the DEFINE DEVCLASS and DEFINE PATH commands should only
reference directories below the root level. This problem will be
addressed in a future fix level. For example, the following
configuration will cause a problem:

DEFINE DEVCLASS FILE DEVTYPE+FILE SHARED=YES DIRECTORY=K:\ DEFINE PATH
FILE FILE1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=FILE DIR=\\server\K$
DEVICE=FILE

where the storage agent is accessing the root directory of the server (
shown as K:\ ). The following is preferable:

DEFINE DEVCLASS FILE DEVTYPE+FILE SHARED=YES DIRECTORY=K:\DIR1 DEFINE
PATH FILE FILE1 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=FILE
DIR=\\server\DIR1 DEVICE=FILE


Slow Performance Establishing a Connection when Using GB Routers on Linux
*************************************************************************

When using an internal GB Router on the Linux operating system where the
Tivoli Storage Manager server is installed, it has been noticed that it
takes the client 20 seconds longer than normal to establish a connection
with the server. Tivoli Storage Manager does not have control over any
type of router that may be used to access a server and therefore cannot
remediate the performance problem.


*******************************************************************************
* Product Fix History                                                         *
*******************************************************************************



APARs Fixed in Level 5.3.2.0

|IC41032 |MISSING CLIENT LEVEL INFORMATION WITH "QUERY NODE" AND SQL
         |IC41032 5698ISMSV 52W |

|IC43227 |ARCHIVE OBJECTS MISSING EXPIRING.OBJECTS ENTRY IN ITSM DB
         |IC43227 5698ISMSV 51A |
         |PK02949 5698ISMVS 520 |
         |PK02952 5698ISMVS 530 |

|IC43594 |ANR0104E ERRORS WHEN RUNNING EXPIRATION ON ARCHIVED OBJECTS
         |PK02934 5698ISMVS 520 |
         |IC43594 5698ISMSV 52W |

|IC44350 |TSM SERVER CAN CORE DUMP IF AN UPDATE DRIVE IS PERFORMED ON A
         |IC44350 5698ISMSV 52A |

|IC44351 |TSM SERVER CAN CORE DUMP WHEN A CANCEL SESSION IS PERFORMED FOR
         |IC44351 5698ISMSV 52A |
         |PK01284 5698ISMVS 520 |
         |PK01290 5698ISMVS 530 |

|IC44550 |TSM SERVER MEMORY LEAK WHEN RUNNING OFFSITE RECLAMATION
         |IC44550 5698ISMSV 52A |
         |PK02384 5698ISMVS 520 |

|IC44559 |TSM AIX SERVER NOT RELEASING SHARED MEMORY SEGMENT WHEN HALTING
         |IC44559 5698ISMSV 52A |

|IC44574 |TSM SERVER IS ERRONEOUSLY DENYING SCHEDULED SESSIONS FROM
         |IC44574 5698ISMSV 52W |

|IC44594 |CENTERA CLIPWRITE PARAMATER ERROR ARCHIVE COPYGROUP RETVER VALU
         |IC44923 5698ISMSV 53A |
         |IC44594 5698ISMSV 52A |
         |PK02017 5698ISMVS 530 |

|IC44597 |Pre-Defined FILE volumes have an estimated capacity of zero.
         |IC44597 5698ISMSV 53W |

|IC44610 |DSMSERV FORMAT FAILURE ISSUES INCORRECTLY FORMATTED MESSAGE
         |IC44610 5698ISMSV 52A |

|IC44618 |Libray manager did not reset the drive reserved by Storage
         |IC44618 5698ISMSV 53A |

|IC44737 |HP Itanuim 64 Bit Storage Agent fails to start with 'ICC load
         |IC44737 5698ISMSV 53H |

|IC44748 |ANR9999D BFCLONE.C(221) ...ERROR 87....DURING LANFREE BACKUP OF
         |IC44748 5698ISMSV 52A |

|IC44765 |DOC.UPDATE FOR MSG ANR1171W AND CMD MOVE DATA: RESTORE OPERATIO
         |IC44765 5698ISMSV 52A |

|IC44780 |5.3 STORAGE AGENT SERVICE WILL NOT START
         |IC44780 5698ISMSV 53Z |

|IC44818 |TSM SERVER MAY CRASH OR INVALIDLY ISSUE DATA INTEGRITY
         |PK00949 5698ISMVS 530 |
         |IC44818 5698ISMSV 52A |
         |PK00853 5698ISMVS 510 |
         |PK00871 5698ISMVS 520 |

|IC44820 |FILE TYPE VOLUMES ARE NOT BEING DELETED AFTER REUSEDELAY
         |IC44820 5698ISMSV 53A |

|IC44833 |TSM SERVER DISPLAYS VALUES FOR IDLEWAIT COMMWAIT MEDIAWAIT
         |IC44833 5698ISMSV 52A |

|IC44854 |TSM SERVER CORE AFTER RECLAMATION SKIPS STORAGE POOL WITH
         |PK04876 5698ISMVS 520 |
         |IC44854 5698ISMSV 53S |
         |IC45628 5698ISMSV 52A |

|IC44883 |HELP COMMAND DOES NOT DISPLAY JAPANESE CHARACTER ON TSM SERVER
         |IC44883 5698ISMSV 52A |

|IC44890 |EXPORT NODE DOES NOT INITIALIZE FROMTIME WITH DEFAULT VALUE OF
         |PK02324 5698ISMVS 510 |
         |PK02363 5698ISMVS 520 |
         |IC44890 5698ISMSV 52A |
         |PK02437 5698ISMVS 530 |

|IC44891 |THE SQL SELECT OUTPUT FROM THE BACKUPS TABLE SHOWS TYPE
         |PK01084 5698ISMVS 520 |
         |IC44891 5698ISMSV 52A |

|IC44901 |TSM SERVER HANG WHEN ATTEMPTING TO VIEW NODE PROPERTIES VIA ISC
         |IC44901 5698ISMSV 53A |

|IC44921 |DSMADMC HANGS ON A SELECT STATEMENT THAT USES CAST WITH CHAR(N)
         |PK04408 5698ISMVS 530 |
         |IC44921 5698ISMSV 53W |

|IC44946 |DSMC QUERY BACKUP -PITDATE MAY SHOW WRONG FILE BACKUP VERSION
         |PK03425 5698ISMVS 530 |
         |IC44946 5698ISMSV 52A |
         |PK03319 5698ISMVS 520 |

|IC44992 |TSM SERVER MAY CRASH DURING A FULL AUDITDB.
         |IC44992 5698ISMSV 52W |
         |PK02370 5698ISMVS 520 |
         |PK02372 5698ISMVS 530 |

|IC44995 |AUDITDB MAY TERMINATE PREMATURELY DURING AUDIT OF BITFILE
         |IC44995 5698ISMSV 52W |
         |PK02373 5698ISMVS 520 |
         |PK02374 5698ISMVS 530 |

|IC45005 |ANR2027E AUDITDB: COMMAND FAILED - SUFFICIENT SERVER RECOVERY
         |PK01547 5698ISMVS 520 |
         |IC45005 5698ISMSV 52A |

|IC45034 |TSM SERVER MAY CRASH WITH A DBTXN063 ASSERTION FAILURE DURING A
         |IC45034 5698ISMSV 52W |
         |PK02376 5698ISMVS 520 |
         |PK02377 5698ISMVS 530 |

|IC45095 |ANR9999D SMADMIN.C(3310): THREADID<XX> UNRECOGNIZED GROUP
         |IC45095 5698ISMSV 53W |
         |PK01704 5698ISMVS 530 |

|IC45146 |TSM Server AUDITDB FIX=YES deleting objects in disk pools is
         |IC45146 5698ISMSV 51A |
         |PK02828 5698ISMVS 510 |

|IC45154 |SERVER CAN CRASH DURING AUDITDB IT THERE IS CORRUPTED BASEDATE
         |PK02442 5698ISMVS 530 |
         |IC45154 5698ISMSV 52A |

|IC45167 |DP MYSAP CLIENTS ON SOLARIS DO NOT INCREASE "IN USE" LICENSES O
         |PK04034 5698ISMVS 520 |
         |IC45167 5698ISMSV 52S |

|IC45168 |Database space trigger can create a mirror volume in the wrong
         |IC45168 5698ISMSV 53A |

|IC45175 |ANR9999D TSM SERVER MAY CRASH DUE TO INVALID ATTEMPT TO FREE
         |IC45175 5698ISMSV 53A |

|IC45184 |ON OS400 V5R3, CHECKIN LIBV FAILS WHEN CATEGORY PARAMETER IS
         |IC45184 5698ISMSV 52P |

|IC45206 |Failed to install TSM 5.3.0 device driver into IBM 36232LX Libr
         |IC45206 5698ISMSV 53W |

|IC45285 |DEFINE PATH FAILS ON ADIC SCALAR WITH SDLT 600 DRIVES
         |IC45285 5698ISMSV 52W |

|IC45288 |Command line Administrative client may receive a non-zero retur
         |PK03288 5698ISMVS 520 |
         |IC45288 5698ISMSV 52A |

|IC45289 |Private tapevols in shared libs not returned to private
         |IC45289 5698ISMSV 52A |

|IC45304 |ANR4947E ERROR ON NAS BACKUP
         |PK02449 5698ISMVS 520 |
         |IC45304 5698ISMSV 52A |

|IC45432 |TSM SERVER HANGS OR MAY CRASH WHEN BACKUP STGPOOL AND MIGRATION
         |PK03066 5698ISMVS 530 |
         |IC45432 5698ISMSV 53W |

|IC45459 |DATABASE, LOG, OR STGPOOL VOLUMES WITH FORMATSIZE GREATER
         |IC45459 5698ISMSV 53L |

|IC45461 |TSM NAS FILESPACE CAPACITY IS NOT BEING UPDATE
         |IC45461 5698ISMSV 52A |
         |IC46108 5698ISMCL 53A |

|IC45503 |FILES MISSING IN BACKUPSETS
         |PK03921 5698ISMVS 520 |
         |IC45503 5698ISMSV 52A |

|IC45514 |TSM SERVER MAY CRASH DURING RECLAMATION AFTER AN OUTPUT VOLUME
         |IC45514 5698ISMSV 53A |

|IC45519 |CRASH WHEN LIBRARY MANAGER DISMOUNTS A VOLUME WITHOUT THE
         |IC45519 5698ISMSV 52S |

|IC45538 |TSM ADMIN CENTER CAN DISPLAY THE INCORRECT TIME FOR THE SCHEDUL
         |IC45538 5698ISMSV 53W |

|IC45552 |HP LTO2 FW requires a longer time to execute commands
         |IC45552 5698ISMSV 53L |

|IC45593 |TSM STORAGE AGENT COMMMETHODS ENABLED DURING STARTUP MAY NOT BE
         |IC45593 5698ISMSV 53W |

|IC45602 |TSM server and agent in LAN-FREE config can hang during
         |IC45602 5698ISMSV 52A |

|IC45606 |TWO SIDED RW OPTICAL PLATTER CORRUPTION POSSIBLE IF TSM STORAGE
         |IC45606 5698ISMSV 51A |

|IC45617 |TSM SERVER CRASH IN ASACQUIREEMPTIESTVOL
         |PK05341 5698ISMVS 520 |
         |PK05464 5698ISMVS 530 |
         |IC45617 5698ISMSV 52W |

|IC45644 |The TSM server may hang when recovery log
         |PK05789 5698ISMVS 510 |
         |IC45644 5698ISMSV 52A |
         |PK05790 5698ISMVS 520 |
         |PK05791 5698ISMVS 530 |

|IC45647 |Cannot mount volumes belonging to REMOVABLEFILE device classes
         |IC45647 5698ISMSV 52L |

|IC45672 |TSM STORAGE AGENT INSTALL PROBLEM
         |IC45672 5698ISMSV 52W |

|IC45689 |TSM SERVER CRASHES DURING EXPIRATION PROCESSING DUE
         |PK04023 5698ISMVS 523 |
         |IC45689 5698ISMSV 52W |

|IC45703 |ACSLS LIBRARIES UNABLE TO MOUNT SCRATCH VOLUMES
         |IC45703 5698ISMSV 53A |

|IC45725 |DEFINE PATH FOR QUALSTAR 68240 FAILS WITH ANR8972E STATING THE
         |IC45725 5698ISMSV 53A |

|IC45726 |THE TSM SERVER AND STORAGE AGENT SERVICES ARE NOT PROPERLY
         |IC45726 5698ISMSV 53W |

|IC45764 |RECOVERY.DEVICES.REQUIRED STANZA OF THE DRM PLAN ONLY SHOWS ONE
         |IC45764 5698ISMSV 53A |

|IC45832 |ENHANCED SCHEDULE NOT WORKING PROPERLY WHEN A SPECIFIC
         |IC45832 5698ISMSV 53W |
         |PK04228 5698ISMVS 530 |

|IC45833 |ANR8300E WHEN ISSUING DEFINE PATH TO IBM 7212-312 LIBRARY
         |IC45833 5698ISMSV 52A |

|IC45845 |ERRONEOUS ANR8214E SERVER PROMPTED SCHEDULE ACTIONS
         |IC45845 5698ISMSV 52L |

|IC45865 |TSM LANFREE BACKUP / ARCHIVE FAILS WITH ANS1329S SERVER OUT OF
         |IC45865 5698ISMSV 52A |
         |PK04436 5698ISMVS 520 |

|IC45870 |MIGRATION FROM DISK STG POOL TO A COLLOCATED SEQUENTIAL STG POO
         |PK09135 5698ISMVS 530 |
         |IC45870 5698ISMSV 53A |

|IC45872 |memory leak during san discovery and discover data mover
         |IC45872 5698ISMSV 53W |

|IC45883 |MOVE DRMEDIA MAY NOT GENERATE ANY MESSAGE IF A VOLUME CANNOT
         |IC45883 5698ISMSV 53S |
         |PK06537 5698ISMVS 520 |
         |PK06538 5698ISMVS 530 |

|IC45895 |TSM SERVER 5.3X CAN CORE DUMP IN ROUTINE HASHFIND ()
         |PK05134 5698ISMVS 530 |
         |PK04935 5698ISMVS 510 |
         |IC45895 5698ISMSV 53L |
         |PK05051 5698ISMVS 520 |

|IC45902 |ANR9999D INVALID GROUP TYPE 3 ENCOUNTERED DURING EXPIRATION OF
         |IC45902 5698ISMSV 53W |

|IC45911 |TSM SERVER CRASHES WHEN ISSUING AN IMPROPERLY FORMATTED
         |IC45911 5698ISMSV 52S |

|IC45925 |ERROR DURING TAPE MOUNT ANR9999D PVRNTP.C(1028): THREADID<50>
         |IC45925 5698ISMSV 53W |

|IC45931 |BACKUP STGPOOL COMMAND MAY NOT BACKUP ALL DATA TO COPY POOL
         |IC45931 5698ISMSV 52A |

|IC45931 |BACKUP STGPOOL COMMAND MAY NOT BACKUP ALL DATA TO COPY POOL
         |PK12139 5698ISMVS 510 |
         |PK12140 5698ISMVS 530 |
         |IC45931 5698ISMSV 52A |
         |PK12090 5698ISMVS 520 |

|IC45933 |KERNEL PANIC ON SUN SOLARIS WITH TSM 5.3 DEVICE DRIVER
         |IC45933 5698ISMSV 53S |

|IC45935 |ANR8302E I/O ERROR WITH CC=201 CAN BE CAUSED BY ERROR IN TSM
         |IC45935 5698ISMSV 51A |

|IC45936 |TSM 5.3 LINUX SERVER FAILS TO BRING LIBRARY LIBT=SCSI ONLINE
         |IC45936 5698ISMSV 53L |

|IC45950 |TSM SERVER CRASHES WHEN PROCESSING CLIENT EVENT THAT CONTAIN
         |IC45950 5698ISMSV 53L |

|IC45967 |TSM LIBRARY MANAGER MAY CRASH WHILE ATTEMPTING TO MOUNT
         |IC45967 5698ISMSV 52A |

|IC45975 |TSM SERVER CAN HANG, LOCK UP, OR CRASH AT 5.3.1.0
         |PK05788 5698ISMVS 530 |
         |IC45975 5698ISMSV 53A |

|IC45985 |TSM SERVER CRASHES DURING A SELECT COMMAND ON ACTLOG TABLE WHEN
         |IC45985 5698ISMSV 53L |

|IC45985 |TSM SERVER CRASHES DURING A SELECT COMMAND ON ACTLOG TABLE WHEN
         |IC45985 5698ISMSV 53L |
         |PK06705 5698ISMVS 530 |

|IC45990 |TSM SERVER CRASHES WHEN PROCESSING AN ERROR PATH RELATED TO A
         |IC45990 5698ISMSV 52A |

|IC46008 |TSM SERVER MANAGEMENT CONSOLE DISPLAYS MULTIPLE ENTRIES FOR
         |IC46008 5698ISMSV 52W |

|IC46019 |QUERY LICENSE does not show Extended Edition features being use
         |IC46019 5698ISMSV 53A |
         |PK06924 5698ISMVS 530 |

|IC46041 |TSM DEVICE DRIVER NEEDS TO BE RESTARTED AFTER HARDWARE CHANGES
         |IC46041 5698ISMSV 52S |

|IC46073 |INSTALL OF TSM SERVER 5.2.2. AND HIGHER FAILS ON SOLARIS 9 "COR
         |IC46073 5698ISMSV 53S |

|IC46121 |ISSUING DEFINE CLIENTACTION COMMAND CAN CAUSE A BUFFEROVERUN
         |PK07762 5698ISMVS 520 |
         |PK07795 5698ISMVS 530 |
         |IC46121 5698ISMSV 52A |

|IC46127 |Tivoli Storage Manager 5.3 on HP has very poor TCIPIP
         |IC46127 5698ISMSV 53H |

|IC46129 |ANR3605E AND ANR0482W MESSAGES SEEN AT THE TSM SERVER
         |IC46129 5698ISMSV 53W |
         |PK11008 5698ISMVS 530 |
         |PK10995 5698ISMVS 520 |

|IC46163 |missing check drive reservation for ACSLS and 3494 library on
         |IC46163 5698ISMSV 53W |

|IC46183 |THE MIGRATE STGPOOL COMMAND WITH WAIT=YES MAY CAUSE A
         |IC46183 5698ISMSV 53A |

|IC46183 |THE MIGRATE STGPOOL COMMAND WITH WAIT=YES MAY CAUSE A
         |PK06989 5698ISMVS 530 |
         |IC46183 5698ISMSV 53A |

|IC46211 |RECLAMATION FINISHES WITH NO ERRORS BUT VOLUME IS NOT RECLAIMED
         |IC46211 5698ISMSV 53A |
         |PK08848 5698ISMVS 522 |
         |IC46812 5698ISMSV 52A |

|IC46215 |TSM SERVER MAY CRASH DURING MIGRATION WHEN 'MIGDELAY>0'
         |IC45879 5698ISMSV 53A |
         |PK05728 5698ISMVS 530 |
         |IC46215 5698ISMSV 52A |

|IC46257 |TSM SERVER CRASH IN TMREGISTERVVOLTXN RECLAIMING VIRTUAL
         |IC46257 5698ISMSV 52A |
         |PK09039 5698ISMVS 520 |
         |PK09042 5698ISMVS 530 |

|IC46305 |UNABLE TO CONFIRM DRIVE USAGE AFTER TSM LIBRARY MANAGER SERVER
         |IC46305 5698ISMSV 53A |

|IC46347 |BACKUP STGPOOL IS RETURNING EITHER RC=0 OR RC=11 FOR THE SAME
         |IC46347 5698ISMSV 52A |

|IC46349 |PERFORMANCE PROBLEMS SEEN WITH MOVE DATA TO A COLLOCATED STORAG
         |IC46349 5698ISMSV 53A |

|IC46349 |PERFORMANCE PROBLEMS SEEN WITH MOVE DATA TO A COLLOCATED STORAG
         |PK08797 5698ISMVS 530 |
         |IC46349 5698ISMSV 53A |

|IC46402 |5.3.X TSM SERVER FAILS TO INITIALIZE 3570B AUTOLOADER
         |IC46402 5698ISMSV 53A |

|IC46411 |CHECKIN LIBV WITH SWAP=YES DOES NOT FIND THE LEAST FREQUENTLY
         |IC46411 5698ISMSV 52A |

|IC46417 |TSM SERVER CRASH IN PKFINDPROCNAME WHEN ISSUING
         |IC46417 5698ISMSV 53A |

|IC46488 |SCRIPT FOR MIGRATE STGPOOL USING PARALLEL COMMAND IS NOT CONSID
         |IC46488 5698ISMSV 53A |
         |PK06910 5698ISMVS 530 |

|IC46506 |ANR2020E WHEN SPECIFYING ULTRIUMC OR ULTRIUM2C FORMAT ON PASE
         |IC46506 5698ISMSV 52P |

|IC46522 |TSM SERVER FOR Z SERIES LINUX FAILS TO START AFTER
         |IC46522 5698ISMSV 52L |

|IC46523 |DELETE VOLUME DISCARDDATA=YES  FAILING  ANR9999D IMUTIL.C(6360)
         |IC46523 5698ISMSV 53W |
         |PK08808 5698ISMVS 520 |

|IC46525 |ANR8972E WHEN DEFINING DRIVE PATHS IN TSM SERVER 5.2.2.0 OR
         |IC46525 5698ISMSV 53W |

|IC46544 |DEFINE VOLUME FAILS WITH ANR7820W INSUFFICIENT SPACE AVAILABLE
         |IC46544 5698ISMSV 53W |

|IC46577 |TAPE STGP VOLUME NOT SET TO READONLY AFTER I/O ERROR
         |IC46577 5698ISMSV 52W |

|IC46645 |NO-QUERY-RESTORE OF AN IMPORTED LINK MAY BE INCORRECT
         |IC46645 5698ISMSV 52S |

|IC46645 |NO-QUERY-RESTORE OF AN IMPORTED LINK MAY BE INCORRECT
         |PK07982 5698ISMVS 530 |
         |PK07900 5698ISMVS 520 |
         |IC46645 5698ISMSV 52S |

|IC46647 |LIBRARY CLIENT SERVER CRASHES ON DEFINE OF SHARED LIBRARY
         |IC46647 5698ISMSV 52W |

|IC46651 |"DISPLAYLFINFO YES" OPTION DOES NOT REPORT LANFREE INFORMATION
         |IC46651 5698ISMSV 53S |

|IC46657 |SERVER ROUTING COMMAND FAILES WITH "ANR9999D BUFFER OVERRUN
         |IC46657 5698ISMSV 53W |

|IC46676 |ANR8447E NO DRIVES ARE CURRENTLY AVAILABLE IN LIBRARY <LIBNAME>
         |IC46676 5698ISMSV 53A |

|IC46687 |TSM SERVER DOES NOT DETECT WHEN TSM CLIENT SCHEDULER
         |PK08356 5698ISMVS 530 |
         |IC46687 5698ISMSV 52A |
         |PK08331 5698ISMVS 520 |

|IC46710 |TSM SERVER AUDITDB MAY NOT CORRECT ALL DATABASE INCONSISTENCIES
         |IC46710 5698ISMSV 52A |
         |PK08809 5698ISMVS 520 |

|IC46716 |UNABLE TO LOG EVENTS TO THE FILEEXIT ON HP-UX
         |IC46716 5698ISMSV 53H |

|IC46732 |CLEANING CARTRIDGE IS NOT AUTOMATICALLY UNLOADED AFTER CLEAN
         |IC46732 5698ISMSV 53L |

|IC46734 |AE IC41032 - TSM SERVER 5.2.5.0 CRASH WHEN USING LAN-FREE
         |IC46734 5698ISMSV 52A |

|IC46734 |AE IC41032 - TSM SERVER 5.2.5.0 CRASH WHEN USING LAN-FREE
         |IC46734 5698ISMSV 52A |
         |PK08799 5698ISMVS 520 |

|IC46735 |ANR9999D - SMNODE.C(22838): THREADID<52> ERROR 6 OBTAINING CGID
         |PK07868 5698ISMVS 520 |
         |IC46735 5698ISMSV 52A |

|IC46738 |TSM SERVER MAY CRASH WHEN UPDATING STORAGE POOL MIGRATION
         |IC46738 5698ISMSV 53A |

|IC46738 |TSM SERVER MAY CRASH WHEN UPDATING STORAGE POOL MIGRATION
         |PK09206 5698ISMVS 530 |
         |IC46738 5698ISMSV 53A |

|IC46739 |TSM DEVICE DRIVER CAUSES SOLARIS SYSTEM CRASH
         |IC46739 5698ISMSV 52S |

|IC46744 |TSM ADMIN COMMAND LINE VULNERABILITY
         |IC46744 5698ISMSV 53A |

|IC46784 |ANR2337W MESSAGE MISSING FROM TSM MESSAGES MANUAL AND ONLINE
         |IC46784 5698ISMSV 53A |
         |PK09215 5698ISMVS 530 |

|IC46822 |TSM SERVER MAY CRASH WHEN BACKUP DB AND EXPIRE INVENTORY RUN AT
         |IC46822 5698ISMSV 52A |
         |PK10955 5698ISMVS 520 |
         |PK10956 5698ISMVS 530 |

|IC46891 |ANR9999D ERROR REPORTED AGAINST IBM LTO TAPE DRIVES
         |IC46891 5698ISMSV 53W |

|IC46921 |TSM 5.3 UNIX ADMIN REFERENCES INCORRECTLY INDICATE A "-" (DASH)
         |IC46921 5698ISMSV 53A |

|IC46948 |CLIENT SCHEDULES FAILING WITH ANR2571W AND ANR9999D
         |IC46948 5698ISMSV 53W |

|IC46948 |CLIENT SCHEDULES FAILING WITH ANR2571W AND ANR9999D
         |PK09656 5698ISMVS 530 |
         |IC46948 5698ISMSV 53W |

|IC46951 |ENHANCED SCHEDULES CAN CAUSE INCORRECT CALCULATIONS
         |IC46951 5698ISMSV 53W |

|IC46951 |ENHANCED SCHEDULES CAN CAUSE INCORRECT CALCULATIONS
         |PK09780 5698ISMVS 530 |
         |IC46951 5698ISMSV 53W |

|IC47012 |QUERY CLOPTSER AND DEFINE CLIENTOPT HAVE BEEN CHANGED TO AVOID
         |IC47012 5698ISMSV 53W |

|IC47026 |TSM SERVER MAY TERMINATE WITH "RUN-TIME ASSERTION FAILED" AFTER
         |IC47026 5698ISMSV 53W |

|IC47026 |TSM SERVER MAY TERMINATE WITH "RUN-TIME ASSERTION FAILED" AFTER
         |IC47026 5698ISMSV 53W |
         |PK10392 5698ISMVS 530 |

|IC47052 |TSM SERVER HANGS ON FORK() CALL WHEN USING GRESHAM EDT TO MANAG
         |IC47052 5698ISMSV 52S |

|IC47057 |TSM STORAGE AGENT 5.3.0 MAY CRASH DURING RESTORE OPERATIONS WHE
         |PK10870 5698ISMVS 530 |
         |IC47057 5698ISMSV 53H |

|IC47155 |17 TB BOUNDARY LIMIT RESULTING FROM INCORRECT CALCULATIONS IN
         |IC47155 5698ISMSV 52A |
         |PK10784 5698ISMVS 520 |
         |PK10789 5698ISMVS 530 |

|IC47195 |Need to add support to show WWN for IBM Gen3 drives on Windows
         |IC47195 5698ISMSV 53W |

|PK01876 |MVS SERVER ABENDS WITH 0C4 WHEN WEB ADMIN REQUESTS
         |PK02044 5698ISMVS 520 |
         |PK02067 5698ISMVS 530 |
         |PK01876 5698ISMVS 510 |

|PK03612 |STORAGE IS BEING ALLOCATED FOR SEVERAL CONTEXT STRUCTURES
         |IC45878 5698ISMSV 52A |
         |PK05576 5698ISMVS 530 |
         |PK03612 5698ISMVS 520 |

|PK03704 |ERROR ANR5354E READING CARTRIDGE DEVCLASS ON MVS
         |PK03704 5698ISMVS 530 |

|PK05280 |MEMORY LEAK ATTEMPTING TCPPORT FROM WEB ADIMIN
         |PK05280 5698ISMVS 520 |
         |IC45729 5698ISMSV 52A |

|PK05709 |AFTER IMPORT WITH MERGE ONLY INACTIVE VERSION MAY NOT EXPIRE
         |PK06536 5698ISMVS 510 |
         |PK05709 5698ISMVS 520 |

|PK09504 |TSM Z/OS SERVER MAY ABEND WITH 0C4 WHEN DEFINE CLIENTACTION
         |IC46262 5698ISMSV 52A |
         |PK09504 5698ISMVS 520 |
         |PK09348 5698ISMVS 530 |

|PQ99172 |EXPORT SERVER FAILURE MESSAGE DOES NOT PROVIDE ENOUGH
         |PQ99172 5698ISMVS 510 |
         |IC44728 5698ISMSV 53A |



APARs Fixed in Level 5.3.1.0

|IC38363 |TSM SERVER ALLOWS SAME DEVICE NAME TO BE DEFINED IN DIFFERENT
         |IC38363 5698ISMSV 51A |

|IC42112 |ITSM SERVER CRASHES AFTER PASSING CORRUPT FILEHANDLE
         |PQ98992 5698ISMVS 520 |
         |PQ99046 5698ISMVS 530 |
         |IC42112 5698ISMSV 52A |

|IC42488 |ANR9999D BFCREATE.C "INCONSISTENT CONTENT FOR ALIAS AGGREGATES"
         |IC42488 5698ISMSV 52A |
         |PQ99546 5698ISMVS 530 |
         |IC43965 5698ISMSV 53A |
         |IC43941 5698ISMSV 51A |
         |PQ99476 5698ISMVS 510 |

|IC42633 |ANR8972E ON DEFINE / UPDATE PATH AFTER PHYSICALLY REPLACING TAP
         |IC42633 5698ISMSV 52A |

|IC42777 |SERVER CRASHES, CORE DUMPS WHEN INVALID SQL SYNTAX WAS ENTERED
         |PK01309 5698ISMVS 520 |
         |PK01310 5698ISMVS 530 |
         |IC42777 5698ISMSV 51A |

|IC42827 |TSM Server coredumps in iconv_open on AIX
         |IC42827 5698ISMSV 52A |

|IC42930 |MESSAGE "ANR2032E UPDATE DRIVE: COMMAND FAILED - INTERNAL SERVE
         |IC42930 5698ISMSV 52A |

|IC42942 |TSM HP server crashes when it fails to open the message file
         |IC42942 5698ISMSV 52H |

|IC42996 |ITSM CORE DUMP AFTER MOUNTMODE CONSOLE SESSIONS ARE CANCELLED
         |PQ99079 5698ISMVS 510 |
         |IC43469 5698ISMSV 52A |
         |IC42996 5698ISMSV 51A |

|IC43019 |ANR9771E: Volume <volName> has incorrect barcode label... seen
         |IC43019 5698ISMSV 52A |

|IC43029 |ANR9999D COLUMN COUNT MISMATCH FOR TABLE AF.AUDIT.CLUSTERS
         |IC43029 5698ISMSV 51A |
         |PK00792 5698ISMVS 530 |
         |PK00733 5698ISMVS 510 |
         |PK00737 5698ISMVS 520 |

|IC43061 |ANR1793W should not be generated if SANDISCOVERY is OFF.  This
         |IC43061 5698ISMSV 52A |

|IC43063 |ANR2023E DEFINE SERVER: EXTRANEOUS PARAMETER - DESCRIPTION
         |IC43063 5698ISMSV 52A |

|IC43086 |MULTIPLE TAPES IN FILLING STATUS FOR COLLOCATED STORAGE POOLS
         |PQ99292 5698ISMVS 520 |
         |IC43086 5698ISMSV 51A |

|IC43118 |ANR8972E UPDATE PATH: Unable to find the element number for
         |IC43118 5698ISMSV 52A |

|IC43127 |ANR0646I AND ANR0729E DURING IMPORT OF CLIENTS WITH ASSOCIATED
         |PQ96912 5698ISMVS 510 |
         |PQ96990 5698ISMVS 520 |
         |IC43127 5698ISMSV 52W |

|IC43202 |UNABLE TO RUN TSM DRIVE CLEANING PROPERLY
         |IC43202 5698ISMSV 52W |

|IC43226 |ANR0106E UNEXPECTED ERROR 2 FETCHING ROW "AS.VOLUME.STATUS"
         |PQ97457 5698ISMVS 520 |
         |IC43226 5698ISMSV 52A |

|IC43228 |ITSM SERVER CRASH IN PMCLOSEDOMAIN - INVALID ATTEMPT
         |IC43228 5698ISMSV 52S |

|IC43257 |ANR9999D ASVOL.C(XXX): THREADID<XX> NUMEMPTYVOLS WENT NEGATIVE
         |IC43257 5698ISMSV 52A |

|IC43287 |Long commands (exceeding 1400 characters) can cause the server
         |PQ98659 5698ISMVS 530 |
         |IC43287 5698ISMSV 53A |
         |PQ98666 5698ISMVS 520 |
         |PK02077 5698ISMVS 510 |
         |IC44947 5698ISMSV 51A |

|IC43301 |ANR9999D MOUNT POINT DEADLOCK MESSAGE FOLLOWING SERVER TO SERVE
         |PQ97956 5698ISMVS 520 |
         |IC43301 5698ISMSV 52A |

|IC43374 |ANR1663E WITH TSM LANFREE OPERATION USING EXTERNAL LIBRARY
         |IC43374 5698ISMSV 52A |

|IC43381 |UTILITY TO CLEAN UP ORPHANS, see IC43381_1
         |PK01546 5698ISMVS 530 |
         |IC43381 5698ISMSV 52A |
         |IC44620 5698ISMSV 51A |
         |IC44622 5698ISMSV 53A |
         |PK01528 5698ISMVS 510 |

|IC43410 |Hardcoded limitation - 256 devices in console
         |IC43410 5698ISMSV 52W |

|IC43449 |MOVE DRMEDIA MAY FAIL WITH ANR9999D INVALID VOLUME TYPE
         |IC43449 5698ISMSV 52A |

|IC43527 |THE 5.2.3 VERSION OF MMCTRACE UPDATES THE WRONG REGISTRY
         |IC43527 5698ISMSV 52W |

|IC43528 |MOVE DRMEDIA REPORTS SUCCESSFUL CHECKOUT OF SHARED LIBRARY
         |IC43528 5698ISMSV 52A |

|IC43529 |SERIAL NUMBER MISSING IN SQL DRIVES TABLE
         |IC43529 5698ISMSV 52L |

|IC43534 |EXPORT NODE OF NODE WITH LARGE NUMBER OF OBJECTS RUNS VERY
         |PK00676 5698ISMVS 520 |
         |IC43534 5698ISMSV 52A |

|IC43535 |HLA ADDRESS FIELD IN CENTERA DEVICE CLASS IS NOT CASE SENSITIVE
         |IC43535 5698ISMSV 52S |

|IC43600 |TSM REGISTER LICENSE COMMAND FAILS TO REGISTER ANY LICENSES,
         |IC43600 5698ISMSV 52A |

|IC43648 |TSM SERVER ABENDS DURING QUERY TOC IF NAS FILER HAS INVALID
         |IC43648 5698ISMSV 52W |

|IC43729 |The TSM Linux Pass-through Driver failed leot case on 64bit
         |IC43729 5698ISMSV 53L |

|IC43738 |DEFINING A DRIVE PATH FAILS WITH: ANR8972E UNABLE TO FIND THE
         |IC43738 5698ISMSV 52W |

|IC43796 |TSM SERVER MANAGES LAST INACTIVE VERSION BY "RETEXTRA" AFTER
         |PQ98755 5698ISMVS 520 |
         |PK00198 5698ISMVS 530 |
         |IC43796 5698ISMSV 52A |

|IC43808 |AUDIT VOLUME FAILING WITH INTERNAL SERVER ERROR
         |IC43808 5698ISMSV 51W |

|IC43909 |MESSAGES ANR0407I AND ANR0406I ARE NOT SHOWING CORRECT HOSTNAME
         |IC43909 5698ISMSV 52A |

|IC43928 |AE IC37071 FIX COMPLETION - DOCUMENTATION FOR ADDTOINIT
         |IC43928 5698ISMSV 52S |

|IC43929 |AE IC37209 FIX COMPLETION - TSM MANUALS NEED TO INCLUDE
         |IC43929 5698ISMSV 52S |

|IC43930 |"QUERY BACKUP" USING "PITTIME" AND "PITDATE" DOES NOT DISPLAY
         |PK00951 5698ISMVS 520 |
         |IC43930 5698ISMSV 52A |
         |PK00988 5698ISMVS 530 |

|IC43954 |ANR8447E CAUSED BY INCORRECT LTO BARCODE LABEL HANDLING
         |IC43954 5698ISMSV 52A |

|IC43996 |ANR9999D DFMIGR.C 2907 MIGRATION TERMINATED UNEXPECTED RESULT
         |PQ98637 5698ISMVS 520 |
         |IC43996 5698ISMSV 51A |
         |IC43419 5698ISMSV 52A |

|IC44034 |IBM TSM MESSAGE ANR1772E MAY INCLUDE INCORRECT INFORMATION
         |IC44034 5698ISMSV 52W |

|IC44048 |DEFINING A SECOND TSM SERVER INSTANCE (MINIMAL CONFIGURATION)
         |IC44048 5698ISMSV 52W |

|IC44110 |ANR0102E ERROR 1 INSERTING ROW IN TABLE DS.SEGMENTS WITH
         |PK00076 5698ISMVS 520 |
         |PK00078 5698ISMVS 530 |
         |PK00014 5698ISMVS 510 |
         |IC44110 5698ISMSV 52W |
         |IC45196 5698ISMSV 52S |

|IC44117 |VOLUMES OVERWRITTEN BEFORE CREATING PROCESS COMPLETES
         |IC44117 5698ISMSV 51A |
         |PQ99286 5698ISMVS 510 |

|IC44148 |DB/LOG Copy vols not added by spacetrigger
         |IC44148 5698ISMSV 53W |

|IC44159 |QUERY STGPOOL REPORTS INVALID ESTIMATED CAPACITY AND
         |PK00006 5698ISMVS 520 |
         |PK00007 5698ISMVS 530 |
         |PK00008 5698ISMVS 520 |
         |IC44159 5698ISMSV 52A |

|IC44164 |Crash is seen after an INTERNAL SERVER ERROR.
         |IC44164 5698ISMSV 53S |

|IC44367 |TSM 5.3 UPGRADE FAILS WITH ANR9999D ADMINIT.C(3628):
         |IC44367 5698ISMSV 53A |

|IC44453 |TSM SERVER OFFSITE RECLAMATION FAILS WITH ANR1173E
         |IC44568 5698ISMSV 53W |
         |PK00595 5698ISMVS 510 |
         |PK00598 5698ISMVS 530 |
         |IC44453 5698ISMSV 52W |
         |IC44522 5698ISMSV 51W |

|IC44502 |QUERY STATUS STILL SHOWS WEBAUTHTIMEOUT AND SERVERURL
         |IC44502 5698ISMSV 53A |

|IC44512 |DELETE FILESPACE LOCK FAILURE RESULTS IN ORPHANED TRANSACTION
         |PK00194 5698ISMVS 510 |
         |PK00196 5698ISMVS 520 |
         |PK00197 5698ISMVS 530 |
         |IC44512 5698ISMSV 52A |

|IC44559 |TSM AIX SERVER NOT RELEASING SHARED MEMORY SEGMENT WHEN HALTING
         |IC44559 5698ISMSV 52A |

|IC44574 |TSM SERVER IS ERRONEOUSLY DENYING SCHEDULED SESSIONS FROM
         |IC44574 5698ISMSV 52W |

|IC44594 |CENTERA CLIPWRITE PARAMATER ERROR ARCHIVE COPYGROUP RETVER VALU
         |IC44923 5698ISMSV 53A |
         |IC44594 5698ISMSV 52A |
         |PK02017 5698ISMVS 530 |

|IC44596 |During TSM server startup, there is a remote possibility
         |IC44596 5698ISMSV 53A |

|IC44597 |Pre-Defined FILE volumes have an estimated capacity of zero.
         |IC44597 5698ISMSV 53W |

|IC44610 |DSMSERV FORMAT FAILURE ISSUES INCORRECTLY FORMATTED MESSAGE
         |IC44610 5698ISMSV 52A |

|IC44618 |Libray manager did not reset the drive reserved by Storage
         |IC44618 5698ISMSV 53A |

|IC44619 |AIT-3 DRIVES GO OFFLINE AFTER RECEIVING REPOSITION ERROR
         |IC44619 5698ISMSV 52W |

|IC44737 |HP Itanuim 64 Bit Storage Agent fails to start with 'ICC load
         |IC44737 5698ISMSV 53H |

|IC44765 |DOC.UPDATE FOR MSG ANR1171W AND CMD MOVE DATA: RESTORE OPERATIO
         |IC44765 5698ISMSV 52A |

|IC44780 |5.3 STORAGE AGENT SERVICE WILL NOT START
         |IC44780 5698ISMSV 53Z |

|IC44818 |TSM SERVER MAY CRASH OR INVALIDLY ISSUE DATA INTEGRITY
         |PK00949 5698ISMVS 530 |
         |IC44818 5698ISMSV 52A |
         |PK00853 5698ISMVS 510 |
         |PK00871 5698ISMVS 520 |

|IC44820 |FILE TYPE VOLUMES ARE NOT BEING DELETED AFTER REUSEDELAY
         |IC44820 5698ISMSV 53A |

|IC44833 |TSM SERVER DISPLAYS VALUES FOR IDLEWAIT COMMWAIT MEDIAWAIT
         |IC44833 5698ISMSV 52A |

|IC44883 |HELP COMMAND DOES NOT DISPLAY JAPANESE CHARACTER ON TSM SERVER
         |IC44883 5698ISMSV 52A |

|IC44890 |EXPORT NODE DOES NOT INITIALIZE FROMTIME WITH DEFAULT VALUE OF
         |PK02324 5698ISMVS 510 |
         |PK02363 5698ISMVS 520 |
         |IC44890 5698ISMSV 52A |
         |PK02437 5698ISMVS 530 |

|IC44891 |THE SQL SELECT OUTPUT FROM THE BACKUPS TABLE SHOWS TYPE
         |PK01084 5698ISMVS 520 |
         |IC44891 5698ISMSV 52A |

|IC44901 |TSM SERVER HANG WHEN ATTEMPTING TO VIEW NODE PROPERTIES VIA ISC
         |IC44901 5698ISMSV 53A |

|IC45005 |ANR2027E AUDITDB: COMMAND FAILED - SUFFICIENT SERVER RECOVERY
         |PK01547 5698ISMVS 520 |
         |IC45005 5698ISMSV 52A |

|IC45095 |ANR9999D SMADMIN.C(3310): THREADID<XX> UNRECOGNIZED GROUP
         |IC45095 5698ISMSV 53W |
         |PK01704 5698ISMVS 530 |

|IC45168 |Database space trigger can create a mirror volume in the wrong
         |IC45168 5698ISMSV 53A |

|IC45175 |ANR9999D TSM SERVER MAY CRASH DUE TO INVALID ATTEMPT TO FREE
         |IC45175 5698ISMSV 53A |

|IC45459 |DATABASE, LOG, OR STGPOOL VOLUMES WITH FORMATSIZE GREATER
         |IC45459 5698ISMSV 53L |

|PK01876 |MVS SERVER ABENDS WITH 0C4 WHEN WEB ADMIN REQUESTS
         |PK02044 5698ISMVS 520 |
         |PK02067 5698ISMVS 530 |
         |PK01876 5698ISMVS 510 |

|PQ95292 |QUERY DB F=D MAY SHOW NEGATIVE VALUES FOR ""TOTAL BUFFER REQUES
         |PQ95292 5698ISMVS 520 |

|PQ95855 |MVS SERVER ABENDED WITH 0C4 DURING A CLIENT BACKUP WHEN
         |PQ97453 5698ISMVS 510 |
         |PQ95855 5698ISMVS 520 |
         |IC42910 5698ISMSV 52A |



APARs Fixed in Level 5.3.0.0

"Group.Members2"
         |PQ88291 5698ISMVS 520 |
         |IC40665 5698ISMSV 52W |

"st orage" admins
         |IC40244 5698ISMSV 52A |

ASSIGNSTDIN'S FILE HANDLE TO  IT.
         |IC40795 5698ISMSV 52A |

CLIENT VOLHIST
         |IC40876 5698ISMSV 51A |

COMMAND AGAINST
         |IC40685 5698ISMSV 51A |
         |IC40962 5698ISMSV 52A |

DESPITE MOUNT
         |IC40678 5698ISMSV 52A |

FILE IS NOT ALL IN LOWER CASE
         |IC40867 5698ISMSV 52W |

INFORMATION
         |PQ88661 5698ISMVS 520 |
         |IC40788 5698ISMSV 52A |

IS USED WITH FORMAT=DTF2 OR DTF2C.
         |IC40708 5698ISMSV 52S |

NO-QUERY RESTORE
         |IC40252 5698ISMSV 52A |
         |PQ88810 5698ISMVS 520 |

REMOTE.
         |IC40865 5698ISMSV 52A |

REPORTING OF OBJECTS DELETED
         |IC40331 5698ISMSV 52A |

ROW FROM TABLE "EXPIRING.OBJECTS"
         |IC40330 5698ISMSV 52A |
         |PQ87485 5698ISMVS 520 |

TH READID<0> AUDIT OF ONE OR MORE SECONDARY TABLES FAILED
         |IC40628 5698ISMSV 52W |
         |PQ88044 5698ISMVS 520 |

THROUGHPUTDATATHRESHOLD
         |PQ87944 5698ISMVS 520 |
         |IC40528 5698ISMSV 51A |
         |PQ87799 5698ISMVS 510 |

TO THE BEGINNING OF THE NEXT
         |IC40299 5698ISMSV 52S |

VOLUME ACTIVITY MESSAGES IN ACTIVITY LOG
         |IC40489 5698ISMSV 52A |
         |PQ87629 5698ISMVS 520 |

bitfiles are exist.
         |IC40616 5698ISMSV 52W |
         |PQ88049 5698ISMVS 520 |

numbers for all the drives.
         |IC40237 5698ISMSV 52W |

tape library
         |IC40236 5698ISMSV 52S |

|IC34918 |ANR0796E CAN BE ISSUED DURING IMPORT UNDER MISLEADING
         |IC34918 5698TSMAX 420 |

|IC35579 |CHECKOUT LIBVOL TIMEOUT FAILURE ACSLS RETURNS JUNK DATA
         |IC35579 5698ISMSV 51A |

|IC36279 |64 BIT TSM DEVICE DRIVER'S FAILING ON 32 BIT AIX KERNEL
         |IC36279 5698ISMSV 51A |

|IC36328 |MOUNT REQUEST FOR VOLUME FAILS SILENTLY
         |IC36328 5698ISMSV 51A |

|IC36347 |IBM TSM Server crashes when using SET ARCHIVERETENTIONPROTECTION
         |IC36347 5698ISMSV 51A |
         |PQ88579 5698ISMVS 520 |

|IC36439 |ANR8442E MESSAGE GENERATED ERRONEOUSLY DURING CHECKIN LIBVOL
         |IC36439 5698ISMSV 51S |

|IC36499 |MOVE NODEDATA REPORTS SUCCESS WITH O BYTES TRANSFERRED
         |PQ77326 5698ISMVS 510 |
         |IC36499 5698ISMSV 51A |

|IC36560 |TSM Server core dumps when the ACSLS is being traced with pvr m
         |IC36560 5698ISMSV 51S |

|IC36561 |TSM Server not utilizing the CAP properly during volume checkou
         |IC36561 5698ISMSV 51S |

|IC36575 |QUERY PROCESS BEHAVIOR AFTER APAR IC34754 WAS FULLY
         |IC36575 5698ISMSV 51W |

|IC36590 |EXPORT NODE FAILS RESOURCE TIMEOUT ORPHANED TRANSACTIONS
         |IC36590 5698ISMSV 51A |
         |PQ77415 5698ISMVS 510 |

|IC36594 |AUDITDB WITH DETAIL=YES, CHANGES ALL 'ONETIME' SCHEDULES TO
         |IC36594 5698ISMSV 51W |

|IC36597 |TSM SERVER IS COREDUMPING DURING UNLOAD DB PROCESS
         |PQ77742 5698ISMVS 510 |
         |PQ77743 5698ISMVS 520 |
         |IC36597 5698ISMSV 51S |

|IC36609 |TSM SERVER CRASHES DURING AUDIT VOLUME IF THERE IS AN AGGREGATE
         |IC36609 5698ISMSV 51W |
         |PQ77610 5698ISMVS 510 |
         |PQ77612 5698ISMVS 520 |

|IC36613 |QUERY SCRIPT COMMAND WITH FORMAT=RAW CORES TSM SERVER ON SOLARI
         |IC36613 5698ISMSV 51S |

|IC36619 |AUDITDB Process Terminates with Error
         |IC36619 5698ISMSV 51W |

|IC36662 |ANR2056E TSM WHEN ATTEMPTING TO DELETE AN INVALID CLIENTOPT
         |IC36662 5698ISMSV 51A |

|IC36706 |Out of space in DISK storage pool with CACHE=YES even though
         |PQ76572 5698ISMVS 510 |
         |PQ76573 5698ISMVS 520 |
         |IC36706 5698ISMSV 52A |

|IC36730 |TSM SERVER CRASH WHEN "DELETE STGPOOL" COMMAND IS ISSUED AND
         |IC36730 5698ISMSV 51A |
         |PQ78991 5698ISMVS 520 |

|IC36747 |UNABLE TO DEFINE A DELL POWERVAULT 128T LIBRARY TO TSM.
         |IC36747 5698ISMSV 51W |

|IC36763 |TSM SERVER CREATING TAPE VOLUMES WITH WRONG BLOCKSIZE VALUE IN
         |IC36763 5698ISMSV 51A |

|IC36766 |TSM SERVER MAY CRASH DURING CLIENT BACKUP/ARCHIVE OPERATIONS
         |PQ77609 5698ISMVS 520 |
         |PQ77103 5698ISMVS 510 |
         |IC36766 5698ISMSV 51A |

|IC36767 |TSM EXCESSIVE ANR2997W MESSAGES LOGGED IN THE TSM ACTIVITY LOG
         |IC36767 5698ISMSV 51A |
         |PQ78095 5698ISMVS 510 |
         |PQ78098 5698ISMVS 520 |

|IC36790 |TSM VIRTUAL VOLUMES DO NOT EXPIRE AFTER IMPORT SERVER.  SERVER
         |PQ77094 5698ISMVS 510 |
         |PQ77095 5698ISMVS 520 |
         |IC36790 5698ISMSV 51A |

|IC36814 |SERVER CRASH WITH Q PROC AND LARGE EXPORT JOBS (SYMPTOM AS
         |PQ77111 5698ISMVS 520 |
         |IC36814 5698ISMSV 51A |

|IC36819 |GENERATE BACKUPSET WITH WAIT=YES PREVENTS TSM CLIENT FROM
         |PQ77686 5698ISMVS 522 |
         |PQ77697 5698ISMVS 520 |
         |PQ77754 5698ISMVS 522 |
         |IC36819 5698ISMSV 51A |

|IC36820 |ANR3605E AND ANR0479W SERVER MESSAGES FOR STA SESSIONS CANCELED
         |IC36820 5698ISMSV 51A |

|IC36826 |ANR MSGANR2032E OCCURS WHEN ATTEMPTING TO DELETE A DRIVE
         |IC36826 5698ISMSV 51P |

|IC36827 |ANR8366E UPDATE FILE DEVCLASS LIBRARY PARAMETER
         |IC36827 5698ISMSV 51S |

|IC36946 |TSM SERVER HANGS ON "DEFINE/UPDATE PATH" COMMAND WHEN OTHER
         |IC36946 5698ISMSV 51S |

|IC36963 |Storage agent aborts when no scratch volumes are available.
         |IC36963 5698ISMSV 51Z |

|IC36975 |SIMULTANEOUS WRITE OPERATIONS FAIL WITH ANR0102E , DS.SEGMENTS.
         |IC36975 5698ISMSV 51S |
         |PQ79263 5698ISMVS 510 |
         |PQ79264 5698ISMVS 520 |

|IC36981 |TSM SERVER MAY ABEND WHEN NO-QUERY RESTORE FINISHES
         |IC36981 5698ISMSV 51A |
         |PQ78096 5698ISMVS 510 |

|IC37042 |TSM GRESHAM ELM ANR9999D MMSEXT.C ERROR READING FROM EXIT RC =
         |IC37042 5698ISMSV 51A |

|IC37071 |STORAGE AGENT /ETC/INITTAB ENTRY PREVENTS LOGIN TO CONSOLE -
         |IC37071 5698ISMSV 51S |

|IC37074 |ANR1859W GENERATED ON TSM STORAGE AGENT WHEN VALIDATEPROTOCOL=
         |IC37074 5698ISMSV 51A |

|IC37080 |TSM SERVER CAN CORE DUMP WHEN LONG RUNNING TSM ADMIN SESSION IS
         |PQ77744 5698ISMVS 510 |
         |PQ77745 5698ISMVS 520 |
         |IC37080 5698ISMSV 51A |

|IC37083 |'RESTORE STGPOOL PREVIEW=YES' OUTPUT INCORRECT AS COMPARED TO
         |IC37083 5698ISMSV 51A |
         |PQ79851 5698ISMVS 520 |

|IC37093 |CLEAN DRIVE COMMAND FAILS ON HP 4MM LIBRARIES WITH ANR8943E
         |IC37093 5698ISMSV 51S |

|IC37166 |Upgradedb fails from V5.1.7.0 to V5.2.0.1
         |IC37166 5698ISMSV 51A |

|IC37171 |The COPYCONTINUE=YES may not be honored during
         |IC37171 5698ISMSV 51A |
         |PQ77813 5698ISMVS 510 |

|IC37172 |TSM SERVER CRASH EXPORT SERVER WITH MANY OR LARGE
         |IC37172 5698ISMSV 51A |
         |PQ78239 5698ISMVS 510 |
         |PQ78240 5698ISMVS 520 |

|IC37209 |DOCUMENTATION ON HOW TO CONFIGURE NATIVE SUN FC HBAS IS MISSING
         |IC37209 5698ISMSV 51S |

|IC37249 |RESTORE DB FAILS WITH: MUTEX ACQUISITION FAILURE, ERRNO=22:
         |IC37249 5698ISMSV 52A |

|IC37254 |SPECTRA LOGIC GATOR LIBRARIES PERFORM SERIALIZED DISMOUNT AND
         |IC37254 5698ISMSV 51S |

|IC37275 |CLEANUP UTILITY TO REMOVE ORPHANED ENTRIES INTODUCED BY IC36975
         |IC37275 5698ISMSV 51A |

|IC37279 |TSM Summary table START_TIME values may be incorrect
         |PQ78952 5698ISMVS 510 |
         |IC37279 5698ISMSV 51S |

|IC37286 |"TAPEALERT MESSAGES" ICON IS MISSING IN THE WEB ADMIN GUI OF TS
         |IC37286 5698ISMSV 52A |

|IC37289 |INTERNAL SERVER ERROR DETECTED RESERVED MOUNT POINT LIBTYPE
         |IC37289 5698ISMSV 52S |

|IC37312 |DEFAULT VALUES FOR 'COMPRESSION' AND 'VALIDATEPROTOCOL' MUST BE
         |PQ81220 5698ISMVS 520 |
         |IC37312 5698ISMSV 52A |

|IC37346 |MEMORY LEAK ON TSM SERVER RESULTING FROM NO-QUERY RESTORES
         |PQ78732 5698ISMVS 510 |
         |PQ78733 5698ISMVS 520 |
         |IC37346 5698ISMSV 51A |

|IC37350 |RECONCILE VOLUMES COMMAND RESETS OBJECTS TO BE DELETED DURING
         |IC37350 5698ISMSV 51A |
         |PQ78928 5698ISMVS 510 |
         |PQ78929 5698ISMVS 520 |

|IC37420 |ISSUING MOVE DRMEDIA <VOLNAME> WHERESTATE=MOUNT TOSTATE=VAULT
         |PQ80965 5698ISMVS 510 |
         |PQ80968 5698ISMVS 520 |
         |IC37420 5698ISMSV 51A |

|IC37437 |THIS IS IN REFERENCE TO DEFECT 11278
         |PQ79713 5698ISMVS 520 |
         |PQ79714 5698ISMVS 510 |
         |IC37437 5698ISMSV 51A |

|IC37438 |REFERENCE 11279 DEFECT
         |IC37438 5698ISMSV 51A |

|IC37446 |ANR1552W MESSAGE TEXT AND EXPLANATION IS UNCLEAR
         |IC37446 5698ISMSV 52A |

|IC37455 |COUNTING OF DATABASE PAGES BACKED UP FOR A DB SNAPSHOT IS
         |IC37455 5698ISMSV 51Z |
         |PQ78999 5698ISMVS 520 |

|IC37499 |UPDATE PATH ONLINE=NO NOT HONORED FOR EXTERNAL LIBRARIES
         |IC37499 5698ISMSV 51A |

|IC37554 |TSM SERVER MAY ALLOW UNAUTHORIZED ACCESS TO SERVER VIA A CONSOL
         |PQ79590 5698ISMVS 520 |
         |PQ79835 5698TSMVS 421 |
         |IC37554 5698ISMSV 52A |

|IC37571 |SSI.51 DOES NOT USE THE VALUE SET FOR SSI_HOSTNAME VARIABLE
         |IC37571 5698ISMSV 51A |

|IC37588 |ANR2571W SCHEDULED SESSION DENIED
         |IC37588 5698ISMSV 51A |
         |PQ83106 5698ISMVS 510 |
         |PQ83107 5698ISMVS 520 |

|IC37589 |ANR9999D ERROR DELETING OBJECT UPGRADEDB
         |IC37589 5698ISMSV 52S |
         |PQ80082 5698ISMVS 520 |

|IC37642 |ELEMENT=AUTODETECT IS NOT SUPPORTED IN DEFINE DRIVE/ DEFINE PAT
         |IC37642 5698ISMSV 52H |

|IC37651 |TSM SERVER MAY RECEIVE ANR4571E MESSAGE WHEN 3494 LIBRARY IS
         |IC37651 5698ISMSV 51A |

|IC37662 |TSM SERVER CAN NOT WRITE TO DLT SCRATCH TAPE CONTAINING
         |IC37662 5698ISMSV 52A |

|IC37668 |TSM MOVE DATA COMMAND OF SEQUENTIAL VOLUME DOES NOT PRODUCE
         |IC37668 5698ISMSV 52A |

|IC37677 |THE MEDIA WAIT VALUE IN THE SUMMARY TABLE AND ACCOUNTING LOG IS
         |IC37677 5698ISMSV 51A |

|IC37694 |TSM 5.2 SOLARIS SERVER CORE DUMPS IF INCORRECT "RESET PASSEXP"
         |IC37694 5698ISMSV 51A |

|IC37709 |THE SSI EXECUTABLE SUPPLIED WITH TSM CAN COREDUMP WHEN UNLIMITE
         |IC37709 5698ISMSV 51A |

|IC37733 |ANR9999D AFMOVE.C(5399): THREADID<55> UNEXPECTED MOVETYPE 4.
         |PQ81719 5698ISMVS 510 |
         |IC37733 5698ISMSV 51W |

|IC37738 |TSM CLIENT UNABLE TO RESTORE DATA FROM TSM 5.1.7.0 SERVER.
         |IC38316 5698ISMSV 52A |
         |PQ80581 5698ISMVS 510 |
         |PQ80582 5698ISMVS 520 |
         |IC37738 5698ISMSV 51A |

|IC37749 |TSM 5.2 Storage Agents terminate Signal 11 with drive cleaning
         |IC37749 5698ISMSV 52S |

|IC37758 |ANR8779E UNABLE TO OPEN DRIVE X, ERROR NUMBER=5 FROM STORAGE
         |IC37758 5698ISMSV 51Z |

|IC37770 |ANR0542W MESSAGE INDICATING MEDIA INACCESSIBLE DOES NOT
         |PQ83546 5698ISMVS 520 |
         |IC37770 5698ISMSV 51A |

|IC37779 |TOC does not load the info for a Expired Image.
         |IC37779 5698ISMSV 52S |

|IC37792 |ITSM 5.2.x: Trailing blank after SESSIONINITIATION parameters "
         |IC37792 5698ISMSV 52A |

|IC37816 |TSM SERVER MEMORY LEAK WITH DRM PREPARE & MOVE DRMEDIA COMMANDS
         |IC37816 5698ISMSV 51A |

|IC37821 |IMPORT NODE merge=yes cmd in TSM 5.2 sets DEACTIVATE_DATE wrong
         |IC37821 5698ISMSV 52S |

|IC37862 |TSM PROMPTED SCHEDULE START CAN CAUSE ANR8214E SESSION <#>
         |IC37862 5698ISMSV 52S |

|IC37866 |MOUNTLIMIT NOT HONORED IN NON PARTITIONED MIXED MEDIA IBM3584
         |IC37866 5698ISMSV 52A |

|IC37877 |TSM SERVER MEMORY USE CONTINUALLY INCREASING AND MAY CRASH TSM
         |IC37877 5698ISMSV 52W |

|IC37894 |DSMSERV_ACCOUNTING_DIR at ITSM Linux 5.2.1.x Server is not hono
         |IC37894 5698ISMSV 52L |

|IC37911 |ANR9999D PKTHREAD.C(636): THREADID<13> THREAD CREATION
         |IC37911 5698ISMSV 52L |

|IC37985 |Tilde (~) characters in object field of Win command sched get i
         |IC37985 5698ISMSV 51A |

|IC37993 |TSM LANFREE PATH IS NOT USED BY CLIENT BACKUPS, DESPITE
         |PQ80380 5698ISMVS 520 |
         |IC37993 5698ISMSV 52W |

|IC38011 |DEVTYPE=VOLSAFE DOES NOT WORK WHEN USING AN EXTERNAL LIBRARY
         |IC38011 5698ISMSV 52A |

|IC38012 |TSM SERVER MAY WITNESS A MEMORY LEAK IF A NAMED PIPES SESSION
         |IC38012 5698ISMSV 51W |

|IC38016 |NOQUERY restore does not restore drive permissions.
         |IC38016 5698ISMSV 51A |

|IC38060 |ORPHANED TRANSACTION AND MEMORY LEAK WITH ITSM SERVER WHEN
         |IC38060 5698ISMSV 51A |
         |PQ80908 5698ISMVS 510 |
         |PQ80909 5698ISMVS 520 |

|IC38063 |MSGANR1092W CAN OCCUR IF ALL DRIVES DEFINED TO LIB MANAGER
         |IC38063 5698ISMSV 52A |

|IC38087 |SERVER ABORTS TXN WITH SYSTEM ERROR WHEN NODE IS NOT AUTHORIZED
         |IC38087 5698ISMSV 51A |

|IC38090 |TSM SERVER CORE DUMP/ABEND - ANR9999D MUTEX ACQUISITION FAILURE
         |PQ84431 5698ISMVS 520 |
         |PQ84432 5698ISMVS 510 |
         |IC38090 5698ISMSV 51A |

|IC38101 |ANR8311E AN I/O ERROR OCCURRED WHILE ACCESSING DRIVE XXX
         |IC38101 5698ISMSV 51A |

|IC38105 |INACTIVE OBJECT EXPIRING WITH RETO VALUE WHEN IT IS NOT THE ONL
         |PQ82384 5698ISMVS 510 |
         |PQ82385 5698ISMVS 520 |
         |IC38105 5698ISMSV 51A |

|IC38172 |CHECKOUT LIBVOLUME and immediate(!) CHECKIN LIBVOLUME reports A
         |IC38172 5698ISMSV 52A |

|IC38177 |SERVER MAY COREDUMP WHILE RUNNING RECLAMATION AND EXPIRATION AT
         |PQ80926 5698ISMVS 510 |
         |IC38177 5698ISMSV 51A |

|IC38342 |EXPORT FROM AIX, IMPORT TO W2K GIVING MISLEADING/INSUFFICIENT
         |IC38342 5698ISMSV 51W |

|IC38347 |THE TSM SERVER 5.2.X CAN CORE DUMP IF THE RESOURCE WAITER TRIES
         |PQ82957 5698ISMVS 510 |
         |PQ82959 5698ISMVS 520 |
         |IC38347 5698ISMSV 52S |

|IC38352 |MEANINGLESS ERRORMESSAGE IS ISSUED, WHEN DSMSERV EXPAND LOG
         |IC38352 5698ISMSV 51A |
         |PQ83789 5698ISMVS 520 |

|IC38360 |ANR2327W/ANR1156W "INTERNAL SERVER ERROR DETECTED" ON OPTICAL
         |IC38360 5698ISMSV 51A |

|IC38375 |'LABEL LIBV' FAILS FOR DEVICE CLASS WITH DEVT=GENERICTAPE WITH
         |IC38375 5698ISMSV 52A |

|IC38376 |RUNASSERVICE is no longer a supported TSM client client option
         |IC38376 5698ISMSV 52W |

|IC38440 |ADDITIONAL DRIVES OF D/T3582 LIBRARY CAN NOT BE DEFINED TO TSM.
         |IC38440 5698ISMSV 52W |

|IC38449 |A define backupset command may fail with message ANR2405E
         |IC38449 5698ISMSV 52A |

|IC38496 |ITSM SERVER ON PASE FAILS DURING DRIVE ALLOCATION USING USRDFN
         |IC38496 5698ISMSV 52P |

|IC38521 |TSM Server on Windows Crashes when the TCPINFO traceflag is use
         |IC38521 5698ISMSV 52W |

|IC38531 |MOVE MEDIA GETS ERROR ANR9999D TMLOCK.C(840): THREADID<77>
         |IC38531 5698ISMSV 51A |

|IC38533 |TSM 5.2 Storage Agent crashes restoring tape data created by a
         |IC38533 5698ISMSV 52W |

|IC38561 |EXCESSIVE READ ERRORS INCORRECT VOLUME PROVIDED FOR MANLIB
         |IC38561 5698ISMSV 51P |

|IC38588 |TSM SERVER DISMOUNT FAILURE MAY LEAVE DRIVE PATH IN USE
         |IC38588 5698ISMSV 51S |

|IC38634 |WHEN USING AIO, THE TSM SERVER MAY ABEND IF A WRITE REQUEST
         |IC38634 5698ISMSV 51A |

|IC38650 |TSM EXPIRATION AND DELETE FILESPACE APPEAR TO HANG. PROCESSING
         |IC38650 5698ISMSV 52A |
         |PQ82153 5698ISMVS 522 |

|IC38687 |Multipe Archives for the same nodename can fail with ANR0530W T
         |IC38687 5698ISMSV 52A |

|IC38690 |OFFSITE VOLUMES NOT COLLOCATED AFTER RECLAMATION OCCURS
         |PQ85696 5698ISMVS 510 |
         |PQ85697 5698ISMVS 520 |
         |IC38690 5698ISMSV 51A |

|IC38712 |USER EXIT DETAILS DO NOT DISPLAY CORRECTLY FROM WEB ADMIN
         |IC38712 5698ISMSV 52P |

|IC38752 |Tapes in NAS storage pools may be prematurely marked full durin
         |IC38752 5698ISMSV 52W |

|IC38781 |IMPORT NODE MERGE=YES FAILS TO MERGE AUTHORIZATION RULES
         |PQ86407 5698ISMVS 510 |
         |IC38781 5698ISMSV 51A |

|IC38819 |TSM SERVER MEMORY LEAK WITH STORAGE AGENT TRANSACTION CACHE
         |IC38819 5698ISMSV 51A |
         |PQ84434 5698ISMVS 520 |

|IC38828 |Add the barcode support for Dell PV122T due to the firmware
         |IC38828 5698ISMSV 52W |

|IC38836 |TSM DEFINE PATH FILE DEVCLASS STA ALLOWS GARBAGE FOR DEVICE PAR
         |IC38836 5698ISMSV 52W |

|IC38864 |TSM server crashes randomly with core dump and diag ANR9999D In
         |IC38864 5698ISMSV 52A |

|IC38868 |ERROR IN DSMSERV.IDL AT 5.2.2 LEVEL.
         |PQ84355 5698ISMVS 520 |
         |IC38868 5698ISMSV 52A |

|IC38911 |TSM Server is reporting Actual Start date/time for a missed cli
         |IC38911 5698ISMSV 52W |

|IC38957 |LANFREE RESTORE FAILS WHEN -FROMNODE USED
         |IC38957 5698ISMSV 52A |

|IC38961 |IN A LIBRARY SHARING ENVIRONMENT, MANUALLY DEFINING TAPE VOLUME
         |IC38961 5698ISMSV 52A |
         |PQ87585 5698ISMVS 520 |

|IC38985 |WEB ADMIN CLIENT ACTIVITY TO TSM SERVER CAN CAUSE SERVER CRASH
         |PQ84789 5698ISMVS 520 |
         |IC38985 5698ISMSV 52W |

|IC38994 |UTILITY FOR IC38940 ADDITIONAL CORRECTIVE ACTION
         |IC38994 5698ISMSV 51A |
         |PQ84700 5698ISMVS 510 |
         |PQ84701 5698ISMVS 520 |

|IC39032 |WRITE PROTECTION CONDITION NOT REPORTED WHITH LABEL LIBVOLUME
         |IC39032 5698ISMSV 51S |

|IC39102 |ANR9999D MUTEX NOT HELD ON CONDITION WAIT, TIMING PROBLEM DELET
         |IC39102 5698ISMSV 51A |

|IC39109 |TSM Server 5.2.X can core dump when a 'quey Status' is issued
         |IC39109 5698ISMSV 52A |

|IC39121 |IBM TSM SERVER MAY OUTPUT WRONG PLATFORM IN ANR0408I & ANR0409I
         |PQ84343 5698ISMVS 520 |
         |IC39121 5698ISMSV 52W |

|IC39123 |DEFINE OR UPDATE DRIVE PATH IN SPECTRALOGIC LIBR HANGS SERVER
         |IC39123 5698ISMSV 52S |

|IC39132 |ANR0106E UNEXPECTED ERROR 2 FETCHING ROW FROM
         |IC39132 5698ISMSV 52A |
         |PQ85264 5698ISMVS 520 |

|IC39141 |Generate Backupset is missing active file entries if the disk s
         |IC39141 5698ISMSV 51W |

|IC39147 |UNDO ARCHCONVERSION - ANR9999D ATTEMPT TO DETACH THREAD NOT
         |IC39147 5698ISMSV 52A |
         |PQ86905 5698ISMVS 520 |

|IC39252 |The error is that the dbLogReserve->CheckLogPinned
         |IC39252 5698ISMSV 51A |
         |PQ86752 5698ISMVS 510 |
         |PQ86753 5698ISMVS 520 |

|IC39254 |The TSM server AUDITDB process may terminate prematurely.
         |IC39254 5698ISMSV 51A |
         |PQ85623 5698ISMVS 510 |
         |PQ85624 5698ISMVS 520 |

|IC39262 |ITSM DEVICE DRIVER FAILS TO READ DATA LOCATED AFTER 1TB BOUNDAR
         |IC39262 5698ISMSV 51A |
         |IC39295 5698ISMSV 52A |

|IC39263 |ITSM DB "MAXIMUM REDUCTION" IS ZERO AFTER ISSUING
         |PQ84558 5698ISMVS 520 |
         |IC39263 5698ISMSV 52W |

|IC39266 |THE TSM SERVER COULD CRASH IF THE DISTINCT KEYWORD IS USED IN
         |IC39266 5698ISMSV 52W |
         |PQ84639 5698ISMVS 510 |
         |PQ84646 5698ISMVS 520 |

|IC39278 |ITSM SERVER ISSUES ANR0530W MESSAGE WHEN ENCOUNTERING A
         |IC39278 5698ISMSV 51A |
         |PQ85028 5698ISMVS 520 |

|IC39287 |During backup processing, an incorrect attribute is passed when
         |IC39287 5698ISMSV 51A |
         |PQ84698 5698ISMVS 510 |
         |PQ84699 5698ISMVS 520 |

|IC39306 |DELETE FILESPACE COMMAND DOES NOT PROPERLY SHOW HOW MANY
         |IC39306 5698ISMSV 52W |
         |PQ86772 5698ISMVS 520 |

|IC39314 |TSM Server core dump:ANR7837S Internal error DBOBJ028 detected.
         |IC39314 5698ISMSV 51P |

|IC39361 |LANFREE BACKUP TO S390 SERVER CAN FAIL WITH ANR9999D FAILURE 2
         |IC39361 5698ISMSV 52Z |

|IC39368 |CANCEL PROCESS MAY RESULT IN CORE/ABEND OF ITSM SERVER IF THE
         |IC39368 5698ISMSV 52A |
         |PQ87504 5698ISMVS 520 |

|IC39380 |ANR8770W UNABLE TO LOAD EXTERNAL LIBRARY MANAGER WITH MULTIPLE
         |IC39380 5698ISMSV 52W |

|IC39395 |PORT SCANNER HANGS OR CRASHES TSM SERVER
         |IC39395 5698ISMSV 52A |
         |PQ87849 5698ISMVS 510 |
         |PQ87852 5698TSMVS 421 |

|IC39418 |LANGUAGE NOT SET BY ITSM SERVER HACMP STARTSERVER SCRIPT CAUSIN
         |IC39418 5698ISMSV 51A |

|IC39424 |DISCREPANCY IN REPORTED VOLUME STATE: MOUNTABLEINLIB VS.
         |IC39424 5698ISMSV 52A |
         |PQ86993 5698ISMVS 520 |

|IC39506 |Errors during expiration caused by self referencing objects
         |IC39506 5698ISMSV 52W |

|IC39524 |SERVER RESTORE DB FAILS FOR FC ATTACHED DRIVES IN 3494
         |IC39524 5698ISMSV 52A |

|IC39525 |"CURRENT VOLUME LIST" OF Q PROC ERRONEOUSLY GROWING WHILE
         |IC39525 5698ISMSV 52A |

|IC39542 |QUERY STGPOOL REPORTS NEGATIVE/INCORRECT ESTIMATED CAPACITY ON
         |IC39542 5698ISMSV 51A |
         |PQ87686 5698ISMVS 510 |

|IC39585 |REGISTER LICENSE IS RELYING ON THE OS SYSTEM DATE / TIME
         |IC39585 5698ISMSV 52A |

|IC39593 |ANR0102E asalloc.c(7539): Error 1 inserting row in table "AS.Se
         |IC39593 5698ISMSV 52W |

|IC39596 |AUDITDB MAY DELETE THE EXPIRING OBJECT ENTRIES FOR BACKUPSETS I
         |PQ85617 5698ISMVS 510 |
         |PQ85618 5698ISMVS 520 |
         |IC39596 5698ISMSV 51A |

|IC39640 |When TSM discovers a serial number mismatch the drive is put of
         |IC39640 5698ISMSV 52L |

|IC39654 |ANR9999D IMEXP.C: BACKUP ENTRY FOR OBJECT <OBJECTID> COULD NOT
         |IC39654 5698ISMSV 52A |
         |PQ86173 5698ISMVS 520 |

|IC39668 |SEVERE DECREASE IN OVERALL PERFORMANCE OF ITSM 5.1.8 OR
         |IC39668 5698ISMSV 52H |

|IC39681 |TSM STOPSERVER: 0403-057 SYNTAX ERROR AT LINE 44 : `<' IS
         |IC39681 5698ISMSV 52A |

|IC39689 |(5.2.3)DRMPLANPREFIX IS DISPLAY INCORRECTLY WHEN THE PREPARE
         |IC39689 5698ISMSV 52W |

|IC39744 |AUDIT VOLUME COMMAND PRODUCES A ANR9999D MESSAGE WHEN THE USER
         |IC39744 5698ISMSV 52W |

|IC39782 |DELETE BACKUPSET FAILS WITH ANR2428E ERROR 2
         |IC39782 5698ISMSV 52A |
         |PQ86336 5698ISMVS 520 |

|IC39827 |Memory Leak in TSM Server 5.2.X  during archive/retrieve and qu
         |IC39827 5698ISMSV 52A |

|IC39830 |TSM SERVER SESSION ACTIVITY HANG DURING BACKUP OPERATION
         |IC39830 5698ISMSV 51S |
         |PQ87066 5698ISMVS 510 |
         |PQ87067 5698ISMVS 520 |

|IC39839 |Set Access command can cause TSM server to crash
         |IC39839 5698ISMSV 52W |
         |PQ86939 5698ISMVS 520 |

|IC39841 |ANR9999D ERROR 7 OBTAINING FILESPACE ID FOR NODEID DURING
         |IC39841 5698ISMSV 52W |
         |PQ86320 5698ISMVS 520 |

|IC39849 |ANR8447E CHECKIN OF GENERICTAPE VOLUMES MISTAKENLY
         |IC39849 5698ISMSV 52A |

|IC39877 |IMPORT OF NODE FILEDATA RESULTS IN ANR9999D BACKUP OBJECT
         |PQ88811 5698ISMVS 520 |
         |IC39877 5698ISMSV 52S |

|IC39881 |ANR9999D ATTEMPT TO RECOVER VOLUME HANDLE FOR OPEN VOLUME
         |IC39881 5698ISMSV 52W |

|IC39931 |ANR0525W ON TSM 5.2 IMPORT FROM TSM 5.1 EXPORTED DATA
         |PQ86968 5698ISMVS 510 |
         |IC39931 5698ISMSV 52A |

|IC39957 |DELETE FILESPACE RETURNS SUCCESS BUT FILESPACE STILL
         |IC39957 5698ISMSV 52A |
         |PQ87176 5698ISMVS 520 |

|IC39966 |ANR9999D ASVOLACQ.C INVALID STATE CHANGE FOR VOLUMES USED BY
         |IC39966 5698ISMSV 52A |

|IC39990 |ANR9999D DSVOL.C ERROR 2 CREATING BIT VECTOR DSK0000000032 FOR
         |PQ87642 5698ISMVS 523 |
         |IC39990 5698ISMSV 52A |

|IC40022 |ITSM WEB ADMIN SLOW AFTER UPGRADE TO 5.2.X.X SERVER LEVEL.
         |IC40022 5698ISMSV 52L |

|IC40049 |UPDATE ARCHIVE OPERATION HANGS AND FINALLY FAILS WITH ANR0538I
         |IC40049 5698ISMSV 52A |
         |PQ87566 5698ISMVS 520 |

|IC40051 |ANR0454E VERIFICATION FAILURE,ANR8779E ERRNO=16, RETRY DISMOUNT
         |IC40051 5698ISMSV 52A |
         |PQ87068 5698ISMVS 520 |

|IC40107 |RETRIEVING OBJECTS FROM CENTERA (DEVTYPE=CENTERA) MAY FAIL.
         |IC40107 5698ISMSV 52S |

|IC40127 |ANR8938E Initialization failed for Shared library SCLIB01; will
         |IC40127 5698ISMSV 51A |

|IC40142 |SELECT COMMAND INCLUDING THE ESCAPE SEQUENCE % AND SOME SPECIFI
         |IC40142 5698ISMSV 52W |
         |PQ87511 5698ISMVS 523 |

|IC40165 |TSM not recognizing Unlabeled tapes in 3494 library after TSM r
         |IC40165 5698ISMSV 51A |

|IC40193 |TSM 5.2.X server can core dump during LANfree backups
         |IC40193 5698ISMSV 52A |

|IC40195 |ITSM ADMIN PROXY FAILS WHEN FILESPACE OBJECT NAMES INCLUDE WHIT
         |IC40195 5698ISMWP 510 |

|IC40214 |LAN-FREE SESSIONS INCORRECTLY TERMINATED DUE TO THROUGHPUT
         |IC40214 5698ISMSV 52A |
         |PQ87603 5698ISMVS 523 |

|IC40236 |Core dump with library operation after update path for IBM

|IC40237 |Update path to the IBM tape drive will get the same element

|IC40244 |WEB Admin pull down menu wrongly removes the 'label libv' command for

|IC40252 |RESTARTABLE RESTORE SESSION EXISTS AFTER SUCCESSFUL LAN-FREE

|IC40299 |OUTPUT FROM VARIOUS QUERY COMMANDS, THE LAST LETTER OF A LINE ISADDED

|IC40302 |TSM DEVICE DRIVER PERFORMANCE DEGRADATION ON SUN.
         |IC40302 5698ISMSV 52S |

|IC40330 |ITSM CLIENT BACKUP FAILS ANR0104E IMBKINS.C ERROR 2 DELETING

|IC40331 |DELETE FILESPACE PROCESS APPEARS TO HANG DUE TO INCORRECT

|IC40363 |SOLARIS 5222/5223 STORAGE AGENT INSTALL/REMOVE FAILS
         |IC40363 5698ISMSV 52S |

|IC40384 |RESTORE DB USING DEVT OPTICAL / WORM FAILS WITH ANR8362E
         |PQ87670 5698ISMVS 523 |
         |IC40384 5698ISMSV 52A |

|IC40483 |ANR8873E MESSAGE REPEATED EVERY 30 SECONDS WHILE POLLING DRIVE.
         |IC40483 5698ISMSV 52W |

|IC40528 |ANR0488W SESSIONS INCORRECTLY CANCELLED PRIOR TO REACHING

|IC40616 |DELETE VOLUME DISCARDDATA=YES will fail on a TSM 5.2.2.x server orphan

|IC40628 |DURING AUDITDB ERROR OCCURED AND AUDIT FAILS: ANR9999D IMAUDIT.C(769):

|IC40645 |NORETRIEVEDATE OPTION IS NOT DISPLAYED IN QUERY OPTION OUTPUT
         |IC40645 5698ISMSV 52A |
         |PQ88451 5698ISMVS 523 |

|IC40665 |ANR0104E and Error 2 from imgroup.c when deleting table from

|IC40678 |ANR0985I BACKUP STORAGE POOL PROCESS COMPLETES SUCCESSFULLY

|IC40684 |UPGRADE OF STORAGE AGENT ON WINDOWS OVERWRITES DSMSTA.OPT
         |IC40684 5698ISMSV 52W |

|IC40685 |AE IC37275 FIX COMPLETION - ANR4759E RUNNING "REPAIR STGVOLS"

|IC40705 |IMPORT NODE CAUSES TSM SERVER TO CRASH WITH FREE MEMORY ERRORS
         |PQ88843 5698ISMVS 520 |
         |IC40705 5698ISMSV 52A |

|IC40708 |TSM BACKUP DB COMMAND FAILS WITH ANR4571E WHEN DTF DEVCLASS

|IC40757 |Define Profassoc is not working correctly when Server=*
         |PQ89205 5698ISMVS 510 |
         |PQ89172 5698ISMVS 520 |
         |IC40757 5698ISMSV 52W |

|IC40788 |INCORRECTLY ISSUED ANR4073I AUDITDB: INVALID FILE AGGREGATION

|IC40795 |ANR9999D <.> UNABLE TO OPEN DRIVE /DEV/SMC0: ATTEMPTED TO

|IC40865 |ANR2400E DURING DELETE VOLHIST WHEN VOLUME TYPE

|IC40867 |REGISTER LIC. ON WINDOWS DOES NOT WORK PROPERLY IF THE LICENSE

|IC40876 |AUDIT LIBRARY DOES NOT SYNCHRONISE LIBRARY MANAGER AND LIBRARY

|IC40949 |ANR0444W PROTOCOL VIOLATION DURING SERVER-SERVER
         |PQ90436 5698ISMVS 520 |
         |IC40949 5698ISMSV 52A |

|IC40959 |CHECKIN LIBVOLUME FAILS WITH ANR8314E - LIBRARY FULL
         |IC40959 5698ISMSV 52S |

|IC41015 |EXPIRATION FAILING FOR WINDOWS NODES ON TSM SERVER
         |IC41015 5698ISMSV 52A |
         |PQ90443 5698ISMVS 520 |

|IC41045 |WEB CLIENT GUI BASED NAS NDMP FILE LEVEL RESTORE OF FOLDER
         |IC41045 5698ISMSV 52W |

|IC41064 |Update of node or admin password can result in password being p
         |IC41064 5698ISMSV 52W |

|IC41080 |ITSM STORAGE AGENT INTERRUPTING VOLUME MOUNT BY ITSM SERVER
         |IC41080 5698ISMSV 52W |
         |PQ89308 5698ISMVS 520 |

|IC41161 |ITSM SERVER "RESTORE DB" TERMINATES AFTER ANR8366E MESSAGE
         |IC41161 5698ISMSV 52W |

|IC41173 |ANR2020E ANR0901W ITSM SERVER FAILS "RESTORE DB" DUE TO PATH
         |IC41173 5698ISMSV 51H |

|IC41174 |ITSM SERVER "RESTORE DB" FAILS WITH ANR9999D ADMDBBK.C(4466):
         |IC41174 5698ISMSV 52W |

|IC41191 |DATABASE CORRUPTION REQUIRES TWO AUDITDB RUNS TO COMPLETELY
         |PQ92444 5698ISMVS 520 |
         |IC41191 5698ISMSV 51A |
         |PQ92333 5698ISMVS 510 |

|IC41212 |DSMSERV CAN CORE DURING ANY DUEL TAPE OPERATION (INPUT/OUTPUT
         |IC41212 5698ISMSV 52S |

|IC41235 |ANR0546W - internal server error on a restore when mount wait t
         |IC41235 5698ISMSV 52A |
         |PQ90565 5698ISMVS 520 |

|IC41240 |TSM DEVICE SUPPORT FOR STK SN6000 EMULATING STK 9840 TAPE DRIVE
         |IC41240 5698ISMSV 52H |

|IC41291 |ANR8855E ITSM SERVER FAILS CHECKIN FOR ACSLS VOLUME STATING
         |IC41291 5698ISMSV 52S |

|IC41306 |TSM server V5190 or 5230 may not rebind all versions of a backu
         |PQ92674 5698ISMVS 510 |
         |IC41306 5698ISMSV 51A |
         |PQ92706 5698ISMVS 520 |

|IC41312 |SERVER ABENDS WITH ANR8213E (SOLARIS) SESSION <SESSION_ID> ABOR
         |PQ89973 5698ISMVS 510 |
         |IC41312 5698ISMSV 51S |

|IC41352 |TSM Server expiration prematurely deletes last backup version
         |IC41352 5698ISMSV 51A |
         |PQ91265 5698ISMVS 510 |

|IC41393 |ANR2715E AFTER UPDATE NODE WITH
         |PQ90188 5698ISMVS 520 |
         |IC41393 5698ISMSV 52S |

|IC41422 |The UPDATE STGPOOL command fails to do parameter checking
         |IC41422 5698ISMSV 52A |

|IC41460 |SOLARIS ITSM 5.1: KERNAL PANIC, MULTI-CPU ENVIRONMENT, CAUSED B
         |IC41460 5698ISMSV 51S |

|IC41462 |Mount/Dismount hang on TSM SERVER using External Library suppor
         |IC41462 5698ISMSV 52H |

|IC41537 |Cancel session during session terminate could cause storage age
         |IC41537 5698ISMSV 51A |
         |PQ92949 5698ISMVS 520 |

|IC41558 |Under certain situations TSM 5.2 Server does not populate Sessi
         |PQ93127 5698ISMVS 520 |
         |IC41558 5698ISMSV 52A |

|IC41571 |LANFREE BACKUP HANGS WHEN ITSM CLIENT SENDS VERB TO STORAGE
         |PQ90837 5698ISMVS 520 |
         |IC41571 5698ISMSV 52W |

|IC41580 |IMMAP02 INCORRECT COLUMN TYPE - ITSM SERVER ABORTS IN
         |IC41580 5698ISMSV 52A |
         |PQ93111 5698ISMVS 520 |

|IC41652 |LABEL LIBVOLUME FAILS WITH ANR9999D COULD NOT OBTAIN MEDIA TYPE
         |IC41652 5698ISMSV 52S |

|IC41656 |Define path fails for 3490 devices if AIX 5.X is 32-bit or 64-b
         |IC41656 5698ISMSV 52A |

|IC41725 |ANR8302E I/O ERROR (OP=RSR) ON NON DLT AND LTO TAPE DRIVES
         |IC41725 5698ISMSV 52W |

|IC41745 |DSMSERV RESTORE DB FAILS WITH ANR8417E FOR ACSLS LIBRARY
         |IC41745 5698ISMSV 52S |

|IC41806 |STANDALONE ITSM MANAGEMENT CONSOLE CAN NOT BE UNINSTALLED, IF
         |IC41806 5698ISMSV 52W |

|IC41845 |ANR8402E WITH "DEFINE PATH" COMMAND FOR QIC DRIVES ON LINUX TSM
         |IC41845 5698ISMSV 52L |

|IC41868 |AUDITDB MAY ABEND BEFORE COMPLETION DUE TO PINNED RECOVERY LOG
         |IC41868 5698ISMSV 52A |
         |PQ92235 5698ISMVS 523 |

|IC41991 |TSM SERVER RANDOMLY GENERATES ANR2032E QUERY: COMMAND FAILED -
         |PQ95247 5698ISMVS 520 |
         |IC41991 5698ISMSV 51S |
         |PQ95223 5698ISMVS 510 |

|IC42004 |ADSMSERV.MIB FILE IS MISSING FROM 5.2.X.X VERSIONS OF  TSM
         |IC42004 5698ISMSV 52W |

|IC42006 |TSM Server V5.2.X.X or higher does not work with SessionInitiat
         |PQ91183 5698ISMVS 520 |
         |IC42006 5698ISMSV 52W |

|IC42050 |AUDIT VOLUME HANGS WHEN A NEGATIVE VALUE IS READ FROM VOLUME
         |PQ91208 5698ISMVS 522 |
         |IC42050 5698ISMSV 52A |

|IC42082 |DOCUMENTATION CLARIFICATION FOR ITSM MESSAGES MANUAL FOR MESSAG
         |IC42082 5698ISMSV 52S |

|IC42097 |TXNLOCK15 INTERNAL ERROR DETECTED RESULTS IN ITSM SERVER ABEND
         |IC42097 5698ISMSV 51A |
         |PQ93702 5698ISMVS 510 |
         |PQ93797 5698ISMVS 520 |

|IC42202 |TSM server receives incorrect affinity id from client and may c
         |IC42202 5698ISMSV 52A |
         |PQ92231 5698ISMVS 520 |

|IC42208 |AMR0595W DURING IMPORT NODE WITH FILEDATA=BACKUPACTIVE
         |PQ95157 5698ISMVS 520 |
         |IC42208 5698ISMSV 52A |

|IC42214 |STORAGE VOLUME DEADLOCK INVOLVING SIMULTANEOUS WRITE
         |PQ92509 5698ISMVS 520 |
         |IC42214 5698ISMSV 51W |

|IC42228 |ENHANCED VOLUME DECISION TRACEPOINTS NEEDED FOR RESTORE PROBLEM
         |IC42228 5698ISMSV 52A |

|IC42249 |ITSM SNMP SUBAGENT (DSMSNMP) MAY STOP COMMUNICATING
         |IC42249 5698ISMSV 52A |

|IC42270 |INVALID SERIAL NUMBER OBTAINED FROM DRIVE
         |IC42270 5698ISMSV 52W |

|IC42272 |ITSM SERVER CORES IN FUNCTION "TMEND" WHEN "DEFINE CURSOR"
         |IC42272 5698ISMSV 52S |
         |IC41714 5698ISMSV 51A |
         |PQ92806 5698ISMVS 510 |

|IC42334 |VOLLIST CAUSES STACK OVERLAY DURING CHECKOUT/CHECKIN ANR8409E
         |IC42334 5698ISMSV 51A |

|IC42469 |SERIAL NUMBER FOR TAPE DRIVE NOT UPDATED IN DRIVE DEFINITION
         |IC42469 5698ISMSV 52W |

|IC42490 |ITSM SERVER CORE TEC SERVER CONNECT OR DISCONNECT
         |IC42490 5698ISMSV 52A |
         |PQ95329 5698ISMVS 520 |

|IC42505 |EMPTY PRIVATE VOLUME WILL RETURN TO SCRATCH AFTER AUDIT
         |IC42505 5698ISMSV 52W |

|IC42565 |CRYPTIC MESSAGE "ANR4383E ... ITEM NOT AVAILABLE" MEANS MAXNUMM
         |PQ93642 5698ISMVS 510 |
         |IC42565 5698ISMSV 51A |
         |PQ93677 5698ISMVS 520 |

|IC42596 |hang on HP server when External Library path incorrect
         |IC42596 5698ISMSV 52H |

|IC42603 |DELETE VOLUME DISCARDDATA=YES MAY LEAVE ORPHANED ENTRIES IN
         |PQ95198 5698ISMVS 510 |
         |IC42603 5698ISMSV 52A |
         |IC42588 5698ISMSV 51A |

|IC42661 |ANR8301E I/O error on TSM library 349x.
         |IC42661 5698ISMSV 52A |

|IC42680 |SERVER CORE DUMPS AFTER DSMSERV DISPLAY DBV
         |PQ95364 5698ISMVS 520 |
         |IC42680 5698ISMSV 52A |

|IC42727 |ANR2032E MOVE MEDIA COMMAND FAILS WITH MESSAGE: ANR9999D
         |IC42727 5698ISMSV 51A |

|IC42736 |TSM SERVER 5.2.3 EXPIRATION SHOWS ANR0538I AND ANR0871E
         |PQ96226 5698ISMVS 520 |
         |IC42736 5698ISMSV 52A |

|IC42803 |DEADLOCK WHEN TRYING TO IMPORT HSM (SPACE MANAGED) FILES
         |PQ96212 5698ISMVS 520 |
         |IC42803 5698ISMSV 52A |

|IC42806 |ITSM SERVER INITIALIZATION OF 3494 LIBRARY IS SLOW.
         |IC42806 5698ISMSV 52A |

|IC42812 |INSTALL_SERVER SCRIPT NOT HONORING THE PREFIX VALUE DURING A
         |IC42812 5698ISMSV 52L |

|IC42813 |TSM SERVER CRASHES DURING CANCEL SESSION IF COMMTIMEOUT AND
         |PQ95450 5698ISMVS 520 |
         |IC42813 5698ISMSV 52W |

|IC42866 |GENERATE BACKUPSET MAY COPY MORE FILESPACES
         |PQ94360 5698ISMVS 520 |
         |IC42866 5698ISMSV 51P |

|IC42890 |ITSM SERVER MEMORY LEAK IN IMGROUP.C WHEN ISSUING "GENERATE
         |IC42890 5698ISMSV 52A |
         |PQ95811 5698ISMVS 520 |

|IC42909 |ITSM WINDOWS CLIENTS BACKING UP SYSTEM OBJECTS CAN SUFFER
         |PQ96732 5698ISMVS 520 |
         |IC42909 5698ISMSV 52S |

|IC42911 |UNLOADDB FAILS WITH ANR9999D INDICATING THAT THE
         |IC42911 5698ISMSV 52A |
         |PQ96420 5698ISMVS 510 |
         |PQ96494 5698ISMVS 520 |

|IC42968 |SELECT FROM OCCUPANCY WILL DISPLAY NULL VALUE FOR
         |IC42968 5698ISMSV 52A |

|IC43020 |TSM SERVER CRASH DUE TO INVALID ATTEMPT TO FREE MEMORY AFTXN.C
         |IC43020 5698ISMSV 52A |

|IC43051 |ITSM SERVER CORE DUMPS DUE TO NO QUERY RESTORE (NQR)
         |IC43051 5698ISMSV 52A |
         |PQ96369 5698ISMVS 520 |

|IC43055 |MOVE DATA OFFSITE VOLUME RESTORE MSGANR1171W MSGANR1156W
         |PQ95261 5698ISMVS 510 |
         |IC43055 5698ISMSV 52A |
         |IC42589 5698ISMSV 51A |

|IC43172 |LAN FREE RESTORE FAILS DUE TO COPY STORAGE POOL TAPE REQUEST
         |IC43172 5698ISMSV 52A |
         |PQ95626 5698ISMVS 520 |

|IC43246 |AE IC42006 FIX COMPLETION. THE PROMPTED SCHEDULER FAILS, IF
         |PQ95843 5698ISMVS 520 |
         |IC43246 5698ISMSV 52W |

|IC43370 |MSGANR1763E ISSUED WHEN NO ADDITIONAL INFORMATION IS AVAILABLE
         |PQ96618 5698ISMVS 520 |
         |IC43370 5698ISMSV 52A |

|IC43445 |TSM SERVER ABENDS WITH ANR7837S INTERNAL ERROR LOCKCYCLE02
         |IC43445 5698ISMSV 52A |
         |PQ96745 5698ISMVS 520 |

|IC43539 |TSM server crash during backup of NAS filesystem (TOC=YES) whic
         |IC43539 5698ISMSV 52S |

|IC43544 |NAS Restore operation may fail to restore all files, but report
         |IC43544 5698ISMSV 52S |

|PQ74605 |(5.1.9, 5.2.2)MSGDM0001S TBUTIL INTERNAL ERROR TBINS068
         |IC37542 5698ISMSV 51A |
         |PQ78943 5698ISMVS 520 |
         |PQ74605 5698ISMVS 510 |

|PQ74682 |TSM WEB ADMINISTRATOR DISPLAYS INCREMENTAL BACKUP WHEN
         |PQ74682 5698ISMVS 510 |

|PQ74849 |UPGRADEDB FROM 4.2.X TO 5.1.X INVALID NODEID FSID SYSTEM OBJECT
         |IC37079 5698ISMSV 51A |
         |PQ74849 5698ISMVS 511 |

|PQ76908 |GARBAGE CHARACTERS IN WEB ADMIN SCREENS FOR SOME TITLE AND
         |PQ76908 5698ISMVS 510 |

|PQ77017 |ABEND 0C4 AFMOVEOFFSITEVOLUME MOVE DATA WAIT=YES
         |PQ77017 5698ISMVS 510 |

|PQ77841 |ANRALLOC SPIN LOCK LOOP ACQUIRING MEMORY LOCK
         |PQ77841 5698ISMVS 510 |

|PQ80211 |SEVERE PERFORMANCE DEGRADATION UPGRADING TO 5.2 FROM 4.2 OR 5.1
         |IC38013 5698ISMSV 52A |
         |PQ80211 5698ISMVS 520 |

|PQ83450 |ANR4759E REPAIR STGVOL UTILITY LOOP
         |PQ83450 5698ISMVS 520 |
         |IC39402 5698ISMSV 51A |
         |PQ84702 5698ISMVS 510 |

|PQ84418 |EXPORT/IMPORT ADMIN SESSIONS CANNOT BE CANCELLED
         |IC41429 5698ISMSV 52A |
         |PQ84418 5698ISMVS 520 |

|PQ84954 |MEMORY LEAK ON VOLLIST ENTRIES RUNNING RECLAMATION
         |PQ84954 5698ISMVS 510 |
         |IC40005 5698ISMSV 51A |
         |PQ86540 5698ISMVS 520 |

|PQ85002 |ANE MESSAGES CREATED BY NETVIEW RECEIVER DO NOT INCLUDE
         |PQ85002 5698ISMVS 510 |

|PQ85040 |"ANR9999D PVROPDEL(282): ... DevClass 11 (driver 8) not support
         |PQ85040 5698ISMVS 520 |

|PQ85063 |MVS SERVER ABEND0C4 WHEN USING GUI CLIENT TO REQUEST
         |PQ85063 5698ISMVS 520 |

|PQ85160 |DELETE ARCHIVE CAUSES POOR PERFORMANCE/HIGH CPU UTIL
         |IC39651 5698ISMSV 52A |
         |PQ85160 5698ISMVS 520 |

|PQ85357 |MULTIPLE ANR1173E DURING OFF-SITE RECLAMATION
         |IC36348 5698ISMSV 51A |
         |PQ85357 5698ISMVS 510 |
         |PQ88108 5698ISMVS 523 |

|PQ85665 |UNABLE TO RESTORE TDP FOR ORACLE LANFREE FROM Z/OS.
         |PQ85665 5698ISMVS 520 |

|PQ86959 |ABEND0C4 RESTARTING 5.1.9.0 SERVER AFTER RUNNING REPAIR STGVOL
         |PQ87962 5698ISMVS 520 |
         |PQ86959 5698ISMVS 510 |
         |IC40498 5698ISMSV 51A |

|PQ87629 |ANR0512I - ITSM SERVER ASSOCIATES INCORRECT PROCESS ID ON

|PQ89285 |WHEN USING CURSORS, A FETCH NEXT MAY RETURN A ROW OF DATA THAT
         |PQ89285 5698ISMVS 520 |

|PQ90370 |ALLOWING TCPADMINPORT OPTION TO DEFAULT TO PORT 1500 MAY
         |PQ90370 5698ISMVS 520 |

|PQ91745 |THE MVS SERVER ABENDED WITH 0C4 WHEN A NUMBER OF CLIENT
         |PQ91140 5698ISMVS 520 |
         |PQ91745 5698ISMVS 510 |

|PQ91843 |RECEIVE MSG ANR2020E WHEN FORMAT=3590E-B, 3590E-C, 3590H-B,
         |PQ91843 5698ISMVS 520 |

|PQ93480 |MSG ANR2753I RESULTS IN BLANK LINE FOLLOWING LAST LINE
         |IC42826 5698ISMSV 52A |
         |PQ93480 5698ISMVS 510 |

|PQ93686 |AE IC34375 FIX COMPLETION - ITSM Server 5.2.x.x CLEANUP BACKUPG
         |PQ93686 5698ISMVS 520 |
         |IC42159 5698ISMSV 52A |

|PQ94503 |MVS SERVER ABENDS WITH ABENDU301 AS THE RESULT OF RUNTIME
         |IC42251 5698ISMSV 52A |
         |PQ94503 5698ISMVS 520 |

|PQ96049 |PERFORMANCE DEGRADES WITH MULTIPLE SELECT COMMANDS ON SESSIONS
         |PQ96049 5698ISMVS 510 |

*******************************************************************************
* Notices and Trademarks                                                      *
*******************************************************************************

Where to Find Documentation
***************************

The publications CD (SK3T-8176) is a searchable information center that
contains the publications for Version 5.3 of the IBM Tivoli Storage
Manager product. The publications are available in PDF or HTML formats,
or in most cases both.

You can also visit the Tivoli Storage Manager technical support Web site
at www.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManager.html for flashes (alerts from technical
support), client requirements, server requirements, supported devices,
manuals, and downloads. Search problem reports and other service
information for topics of interest. Register at the site to use My
Software Support to create a customized support page for your use.

From the left pane, under Related Links, select Library to access the
IBM Tivoli Information Center.

The books can also be obtained at
http://publib.boulder.ibm.com/tividd/td/tdmktlist.html

To use the PDF format, you can obtain the Adobe Acrobat Reader from
http://www.adobe.com/prodindex/acrobat/readstep.html. To install the
Adobe Acrobat Reader on your platform, run the appropriate installation
file, and follow the on-line installation instructions.


Getting Help
************

To receive technical support for IBM Tivoli Storage Manager, contact
your administrator. This should be your first step when having problems
with IBM Tivoli Storage Manager. Your administrator will know how to
contact IBM for Technical Support on your behalf.

Use the Problem Determination Guide to look for a solution to the
problem, or for recommended documentation to collect for use when
talking with support. For the latest information about IBM Tivoli
Storage Manager, visit www.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManager.html.

To participate in user discussions of IBM Tivoli Storage Manager,
subscribe to an Internet listserv forum. This is not officially
supported by IBM, but IBM support people do participate in the
discussions, along with other users. You can subscribe by sending a note
to listserv@vm.marist.edu that contains the following command in the
message body:

SUBSCRIBE ADSM-L yourfirstname yourlastname

Posts can then be sent to: adsm-l@vm.marist.edu.

Password protected server for z/OS & OS/390 Tivoli Storage Manager PTF
(fixpacks) and patch (Interim fix) deliverables.

IBM also supports a password protected server where you can find
fixpacks, interim fixes and other related materials: This server is: 
*  Server: service2.boulder.ibm.com
*  Userid: tsm4mvs
*  Password: xxxxxxx

Where xxxxxxx is password obtained from IBM service.

FTP syntax for most Web Browsers:
ftp://tsm4mvs:xxxxxxx@service2.boulder.ibm.com

The following directory contains Tivoli Storage Manager for z/OS &
OS/390 fixpacks: /storage/tivoli-storage-management/maintenance/server

The following directory contains Tivoli Storage Manager for z/OS &
OS/390 patches:
/storage/tivoli-storage-management/patches/server/MVS-OS390


Anonymous FTP Server
********************

IBM also supports an anonymous FTP server where you can find IBM Tivoli
Storage Management fixpacks, interim fixes and other related materials.
The server is: service.boulder.ibm.com.

Three other anonymous servers are unofficially maintained by non-IBM
volunteers. These servers are: 
*  ftp.rz.uni-karlsruhe.de (mirror - Germany)
*  ftp.wu-wien.ac.at (mirror - Austria)
*  ftp.aset.psu.edu (mirror - Pennsylvania)


Trademarks
**********

IBM, Tivoli, AIX, z/OS, OS/390, MVS, iSeries, pSeries, xSeries, and
zSeries are trademarks of International Business Machines Corporation in
the United States, other countries, or both.

Windows is a trademark of Microsoft Corporation in the United States,
other countries, or both.

UNIX is a registered trademark of The Open Group in the United States
and other countries.

Linux is a trademark of Linus Torvalds in the United States, other
countries, or both.

Other company, product or service names may be trademarks or service
marks of others.

